VariableRuntimeDxe will have OnEndOfDxe() callback function at
TPL_NOTIFY level on EndOfDxe event when DXE variable solution is
used.
Status = gBS->CreateEventEx (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
OnEndOfDxe,
NULL,
&gEfiEndOfDxeEventGroupGuid,
&EndOfDxeEvent
);
VariableSmm will have SmmEndOfDxeCallback() callback function at
TPL_CALLBACK level on SmmEndOfDxe event when SMM variable solution
is used.
SmmIplGuidedEventNotify() - PiSmmIpl.c TPL_CALLBACK on EndOfDxe
->
SmmEndOfDxeHandler() - PiSmmCore.c install SmmEndOfDxe protocol
->
SmmEndOfDxeCallback() - VariableSmm.c
The TPL level for (Smm)EndOfDxe callback between VariableRuntimeDxe
and VariableSmm is inconsistent, it will make the unified platform
code could not make sure its TPL_NOTIFY EndOfDxe callback function
(to use variable lock/check) executed before (Smm)EndOfDxe callback
function in variable driver. The variable lock/check will start to
protect after (Smm)EndOfDxe callback function in variable driver is
executed.
This patch is to algin the TPL level to TPL_CALLBACK for (Smm)EndOfDxe
callback between VariableRuntimeDxe and VariableSmm.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
build report error when the same Guid value in FDF file use lowercase,
in tools_def.txt file use uppercase.
The guid value's compare should not case-sensitive.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bin Wang <binx.a.wang@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add the partition type GUID for every partition to the installed handle,
this is required per the UEFI specification.
"The firmware must add the PartitionTypeGuid to the handle of every
active GPT partition using EFI_BOOT_SERVICES.InstallProtocolInterface()."
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen.qdt@qualcommdatacenter.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
move hex character info from GUID expressions into seperate variable to
facilitate reuse.
I had a type with insufficient {} in the first version.
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=890
There are use cases where a VOID * PCD needs to be generated from multiple
binary input files. This can be in the form of an array of fixed size
elements or a set of variable sized elements.
Update BinToPcd to support multiple one or more -i INPUTFILE arguments.
By default, the contents of each binary input file are concatenated in
the order provided. This supports generating a PCD that is an array of
fixed size elements
Add -x, --xdr flags to BinToPcd to encodes the PCD using the
Variable-Length Opaque Data of RFC 4506 External Data Representation
Standard (XDR).
https://tools.ietf.org/html/rfc4506https://tools.ietf.org/html/rfc4506#section-4.10
The data format from RFC 4506 meets the requirements for a PCD that is a
set of variable sized elements in the Variable-Length Opaque Data format.
The overhead of this format is a 32-bit length and 0 to 3 bytes of padding
to align the next element at a 32-bit boundary.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
If the platform creates the "TlsCaCertificate" variable as volatile, then
EnrollX509toVariable() shouldn't fail to extend it just because
TLS_AUTH_CONFIG_VAR_BASE_ATTR contains the EFI_VARIABLE_NON_VOLATILE
attribute.
Thus, if the variable exists, add the EFI_VARIABLE_APPEND_WRITE attribute
to the variable's current attributes. This is what DeleteCert() does
already.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In TlsConfigCertificate(), make sure that the set of EFI_SIGNATURE_LIST
objects that the platform stored to "TlsCaCertificate" is well-formed.
In addition, because HttpInstance->TlsConfiguration->SetData() expects
X509 certificates only, ensure that the EFI_SIGNATURE_LIST objects only
report X509 certificates, as described under EFI_CERT_X509_GUID in the
UEFI-2.7 spec.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=909
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For TlsConfigureSession(), it makes sense to exempt EFI_NOT_FOUND from
TlsConfigCipherList() / gRT->GetVariable(), because there is a default
cipher list (SSL_DEFAULT_CIPHER_LIST) we can fall back to.
The same is not true of TlsConfigCertificate(), because there is no
default CA cert list. The platform (or the user of the Setup utility) is
required to configure a CA cert list first.
Remove the misleading comment and status code mapping in
TlsConfigCertificate().
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Introduce a FreeCACert label near the end of the function, so that we can
keep the FreePool(CACert) statement centralized for error and success
exits.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
The string "HTTPClient" has 10 non-NUL characters; the value 9 is a
copy-paste leftover from "PXEClient". Check for all 10 characters in the
vendor-class-identifier option when determining whether the DHCP offer is
an HTTP offer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Initialize local variable to suppress warning C4701/C4703:
potentially uninitialized local variable/pointer variable.
1.In VirtualMemory.c:
Read of "PageMapLevel4Entry" in SetMemoryEncDe() is only
reached when "PageMapLevel4Entry" is got correctly.
2.In VirtioBlk.c:
Reads (dereferences) of "BufferMapping" and "BufferDeviceAddress"
in SynchronousRequest() are only reached if "BufferSize > 0" *and*
we map the data buffer successfully.
3.In VirtioScsi.c:
Reads (dereferences) of "InDataMapping" and "InDataDeviceAddress",
in VirtioScsiPassThru() are only reached if
"Packet->InTransferLength > 0" on input, *and* we map the
input buffer successfully. The similar reason for "OutDataMapping"
and "OutDataDeviceAddress".
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
sha256 is not the standard option. It should be replaced by sha -sha256.
Otherwise, it doesn't work in MAC OS.
In V2, update the option to sha1 -sha256.
In late openssl version >= 1.1, there is no sha option, but has sha1,sha256.
In previous openssl version < 1.1, there is no sha256, but has sha,sha1.
To work with all openssl version, use sha1 -sha256 for it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liao Jui-peng <jui-pengx.liao@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Add a new exception support for the checkPoint of no use C type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hess Chen <hesheng.chen@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Booting from USB may fail while the macro USB_BOOT_IO_BLOCKS
set to 128 because the block size of some USB devices are exceeded
512, like some virtual CD-ROM from BMC, the block size is 2048.
So,the count blocks to transfer should be calculated by block
size of the USB devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Commit 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
changes shell edit and hexedit to read input through SimpleTextInEx.
It exposes a issue in UsbKeyboard driver:
Per UEFI Spec,
When interpreting the data from this function (ReadKeyStrokeEx), it
should be noted that if a class of printable characters that are
normally adjusted by shift modifiers (e.g. Shift Key + "f" key) would
be presented solely as a KeyData.Key.UnicodeChar without the
associated shift state. So in the previous example of a Shift Key +
"f" key being pressed, the only pertinent data returned would be
KeyData.Key.UnicodeChar with the value of "F".
UsbKeyboard driver does convert Shift Key + "f" to "F" without the
shift state. But it doesn't do the conversion for all printable
characters, e.g.: Shift Key + "1" --> "!".
The root cause is today's logic to check whether a character is
printable or not is as below:
if ((KeyDescriptor->AffectedAttribute & EFI_AFFECTED_BY_CAPS_LOCK)
!= 0) {
So it only converts Shift + "a"-"z", but doesn't for Shift + "0"-"9",
and Shift + "["...
The patch updates the check logic as below to fix the issue:
if ((KeyDescriptor->Unicode != CHAR_NULL) &&
(KeyDescriptor->ShiftedUnicode != CHAR_NULL) &&
(KeyDescriptor->Unicode != KeyDescriptor->ShiftedUnicode)) {
The above check is TRUE when the character is printable and
it's *really* affected by Shift key.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If there is no dynamic pcds, there should be DB header
in the Pcd DataBase.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
