For scene of
HandOffToDxeCore()->SwitchStack(DxeCoreEntryPoint)->
InternalSwitchStack()->LongJump(),Variable HobList.Raw
will be passed (from *Context1 to register a0) to
DxeMain() in parameter *HobStart.
However, meanwhile the function LongJump() overrides
register a0 with a1 (-1) due to commit (ea628f28e5 "RISCV: Fix
InternalLongJump to return correct value"), then cause hang.
Replacing calling LongJump() with new InternalSwitchStackAsm() to pass
addres data in register s0 to register a0 could fix this issue (just
like the solution in MdePkg/Library/BaseLib/AArch64/SwitchStack.S)
Signed-off-by: Yang Wang <wangyang@bosc.ac.cn>
Cc: Bamvor Jian ZHANG <zhangjian@bosc.ac.cn>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ran Wang <wangran@bosc.ac.cn>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Implement Cache Management Operations (CMO) defined by
RISC-V spec https://github.com/riscv/riscv-CMOs.
Notes:
1. CMO only supports block based Operations. Meaning cache
flush/invd/clean Operations are not available for the entire
range. In that case we fallback on fence.i instructions.
2. Operations are implemented using Opcodes to make them compiler
independent. binutils 2.39+ compilers support CMO instructions.
Test:
1. Ensured correct instructions are refelecting in asm
2. Qemu implements basic support for CMO operations in that it allwos
instructions without exceptions. Verified it works properly in
that sense.
3. SG2042Pkg implements CMO-like instructions. It was verified that
CpuFlushCpuDataCache works fine. This more of less
confirms that framework is alright.
4. TODO: Once Silicon is available with exact instructions, we will
further verify this.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Dhaval Sharma <dhaval@rivosinc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunil V L <sunilvl@...>
Reviewed-by: Jingyu Li <jingyu.li01@...>
__builtin_return_address returns a pointer, not a string. Fix
the STACK FAULT message in BaseStackCheckLib appropriately.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4609
The current CalculateCrc16Ansi implementation does the following:
1) Invert the passed checksum
2) Calculate the new checksum by going through data and using the
lookup table
3) Invert it back again
This emulated my design for CalculateCrc32c, where 0 is
passed as the initial checksum, and it inverts in the end.
However, CRC16 does not invert the checksum on input and output.
So this is incorrect.
Fix the problem by not inverting input checksums nor output checksums.
Callers should now pass CRC16ANSI_INIT as the initial value instead of
"0". This is a breaking change.
This problem was found out-of-list when older ext4 filesystems
(that use crc16 checksums) failed to mount with "corruption".
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add the bit masks for DLL Characteristics, used within the optional
header of a PE, to the PeImage.h header file.
Update the Visual Studio, Microsoft Portable Executable and Common
Object File Format Specification, and the PE/COFF Specification to the
latest version.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Joey Vagedes <joeyvagedes@gmail.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
The ASWG ECR 2303 introduces a new field 'TRBE
interrupt' to GICC structure in ACPI 6.5.
The Trace Buffer Extension (TRBE) interrupt is a
Processor Private interrupt (PPI) and is used to
specify a platform-specific interrupt to signal
TRBE events.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Bugzilla: 3706 'Code First - MADT GICC new flags'
On ARM systems physical CPU hotplug is not supported.
All CPUs are considered present and this is true
throughout the system uptime.
The ECR 2285 introduces a new 'online-capable' flag
in the GICC structure flags in ACPI 6.5, to signal
firmware policy (CPU is not enabled but it can be
enabled and onlined). This enables OSPM to support
virtual CPU hotplug (on virtual platforms for
instance).
This ECR also updates the MADT table revision to 6
to reflect the ACPI 6.5 changes. Therefore, update
the MADT table revision to match the value as
specified in ACPI 6.5.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The PLDM protocol uses Request bit to help differentiate between PLDM
request and response messages.
Currently the Pldm.h header only have a flag for the request message.
Add a flag for the response message as well.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Correct MCTP_TRANSPORT_HEADER structure field 'SourceEndpointIdId' to
'SourceEndpointId'.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Adds a PrEval entry to the package's ci.yaml file which is used to
verify if the package uses a particular library instance when that
library instance file (INF) is updated.
When a library instance file (INF) is updated, PrEval will review each
package's DSC as described in the ci.yaml file to determine if the
package uses said library instance. If the package does use the library
instance, it will be built and tested to ensure the package is not
broken from the change.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Joey Vagedes <joeyvagedes@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The ARM implementation of InternalLongJump always returned the value
Value - but it is not supposed to ever return 0. Add the test to prevent
that, and return 1 if Value is 0 - as is already present in AArch64.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Both in SetJump and in InternalLongJump, 32-bit w register views were
used for the UINTN return value. In SetJump, this did not cause errors;
it was only counterintuitive. But in InternalLongJump, it meant the top
32 bits of Value were stripped off.
Change all of these to use the 64-bit x register views.
Signed-off-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reanimated-by: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
