RedfishRestExDxe driver failed to uninstall service binding protocol
when driver binding stop is called. Application drivers may still
use RedfishRestExDxe after it is disconnected in system.
Signed-off-by: Nickle Wang <nicklew@nvidia.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Much of the MMU logic was written without function headers. This patch
adds function headers where absent and updates function headers which
do not match the EDK2 standard.
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
There are ASSERTs present in the MMU logic to ensure various
functions return successfully, but these ASSERTs may be ignored
on release builds causing unsafe behavior. This patch updates
the logic to handle unexpected return values and branch safely.
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This patch updates the GetMemoryRegion() function to handle the case
where there is no mapping for the requested address.
The original logic for the ARM would hit an ASSERT after
GetMemoryRegionPage() returned EFI_SUCCESS but did not update The
RegionLength parameter.
The original logic for the AARCH64 would never initialize the
RegionLength parameter to zero and return EFI_SUCCESS after
traversing an unknown number of pages.
To fix this, update the logic for both architecture to return
EFI_NO_MAPPING if the BaseAddress being checked is unmapped.
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This patch applies Uncrustify to the following files:
ArmPkg/Drivers/MmCommunicationPei/MmCommunicationPei.c
ArmPkg/Include/IndustryStandard/ArmStdSmc.h
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4182
Adds an SMM SMRAM save-state map for AMD processors.
SMRAM save state maps for the AMD processor family are now supported.
Save state map structure is added based on
AMD64 Architecture Programmer's Manual, Volume 2, Section 10.2.
The AMD legacy save state map for 32-bit architecture is defined.
The AMD64 save state map for 64-bit architecture is defined.
Also added Amd/SmramSaveStateMap.h to IgnoreFiles of EccCheck,
because structures defined in this file are derived from
Intel/SmramSaveStateMap.h.
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The timer notify function should be called with timer period, not the
value read from timer register.
Signed-off-by: Tuan Phan <tphan@ventanamicro.com>
This commit is code refinement to current smm runtime InitPaging()
page table update code. In InitPaging(), if PcdCpuSmmProfileEnable
is TRUE, use ConvertMemoryPageAttributes() API to map the range in
mProtectionMemRange to the attrbute recorded in the attribute field
of mProtectionMemRange, map the range outside mProtectionMemRange
as non-present. If PcdCpuSmmProfileEnable is FALSE, only need to
set the ranges not in mSmmCpuSmramRanges as NX.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
This commit is code refinement to current smm pagetable generation
code. Add a new GenSmmPageTable() API to create smm page table
based on the PageTableMap() API in CpuPageTableLib. Caller only
needs to specify the paging mode and the PhysicalAddressBits to map.
This function can be used to create both IA32 pae paging and X64
5level, 4level paging.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Clear CR0.WP before modify smm page table. Currently, there is
an assumption that smm pagetable is always RW before ReadyToLock.
However, when AMD SEV is enabled, FvbServicesSmm driver calls
MemEncryptSevClearMmioPageEncMask to clear AddressEncMask bit
in smm page table for this range:
[PcdOvmfFdBaseAddress,PcdOvmfFdBaseAddress+PcdOvmfFirmwareFdSize]
If page slpit happens in this process, new memory for smm page
table is allocated. Then the newly allocated page table memory
is marked as RO in smm page table in this FvbServicesSmm driver,
which may lead to PF if smm code doesn't clear CR0.WP before
modify smm page table when ReadyToLock.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
In PiSmmCpuDxeSmm code, SetMemMapAttributes() marks memory ranges
in SmmMemoryAttributesTable to RO/NX. There may exist non-present
range in these memory ranges. Set other attributes for a non-present
range is not permitted in CpuPageTableMapLib. So add code to handle
this case. Only map the present ranges in SmmMemoryAttributesTable
to RO or NX.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
In ConvertMemoryPageAttributes() function, when clear RP for a
specific range [BaseAddress, BaseAddress + Length], it means to
set the present bit to 1 and assign default value for other
attributes in page table. The default attributes for the input
specific range are NX disabled and ReadOnly. If there is existing
present range in [BaseAddress, BaseAddress + Length] and the
attributes are not NX disabled or not ReadOnly, then output the
DEBUG message to indicate that the NX and ReadOnly attributes of
the existing present range are modified in the function.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Simplify the ConvertMemoryPageAttributes API to convert paging
attribute by CpuPageTableLib. In the new API, it calls
PageTableMap() to update the page attributes of a memory range.
With the PageTableMap() API in CpuPageTableLib, we can remove
the complicated page table manipulating code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
In UnsetGuardPage(), before SmmReadyToLock, remove NX and RO
memory attribute protection for guarded page since
EfiConventionalMemory in SMRAM is RW and executable before
SmmReadyToLock. If UnsetGuardPage() happens after SmmReadyToLock,
then apply EFI_MEMORY_XP to the guarded page to make sure
EfiConventionalMemory in SMRAM is NX since EfiConventionalMemory
in SMRAM is marked as NX in PiSmmCpuDxe driver when SmmReadyToLock.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Remove code that sets AddressEncMask for non-leaf entries when
modifing smm page table by MemEncryptSevLib. In FvbServicesSmm
driver, it calls MemEncryptSevClearMmioPageEncMask to clear
AddressEncMask bit in page table for a specific range. In AMD
SEV feature, this AddressEncMask bit in page table is used to
indicate if the memory is guest private memory or shared memory.
But all memory accessed by the hardware page table walker is
treated as encrypted, regardless of whether the encryption bit
is present. So remove the code to set the EncMask bit for smm
non-leaf entries doesn't impact AMD SEV feature.
The reason encryption mask should not be set for non-leaf
entries is because CpuPageTableLib doesn't consume encryption
mask PCD. In PiSmmCpuDxeSmm module, it will use CpuPageTableLib
to modify smm page table in next patch. The encryption mask is
overlapped with the PageTableBaseAddress field of non-leaf page
table entries. If the encryption mask is set for smm non-leaf
page table entries, issue happens when CpuPageTableLib code
use the non-leaf entry PageTableBaseAddress field with the
encryption mask set to find the next level page table.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The UEFI driver model invokes the supported() method on every driver
every time a connection attempt is made on any handle, and so doing an
unconditional DEBUG() print inside this method produced a lot of noise.
So let's drop this DEBUG() call from the VirtioSerial driver's
Supported() method.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The OP-TEE secure OS exposes a non-secure memory region for
communication between the secure OS itself and any clients in the
non-secure firmware. This memory is writable by non-secure and is not
used for code only data, and so it should be mapped non-executable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Now that we have a sane API to set and clear memory permissions that
works the same on ARM and AArch64, we no longer have a need for the
individual set/clear no-access/read-only/no-exec helpers so let's drop
them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
StandaloneMm has its own version of the ArmMmuLib library class, but
includes the ArmMmuLib header. This happens to work because the
prototypes that are referenced are the same, but this will no longer be
the case after a future patch. So correct the #includes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Because it's simpler for a platform to include the ResetVector source
and having pre-built binaries add burdens of updating the pre-built
binaries. This patch removes the pre-built binaries and the script
that buids the pre-built binaries.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
ResetVector assembly implementation puts "ALIGN 16" in the end
to guarantee the final executable file size is multiple of 16 bytes.
Because the module uses a special GUID which guarantees it's put in
the very end of a FV, which should be also the end of the FD.
All of these (file size is multiple of 16B, and the module is put at
end of FV, FV is put at end of FD) guarantee the "JMP xxx" instruction
is at FFFF_FFF0h.
This patch updates INF file and ReadMe.txt to add guidance of FDF ffs
rule for the ResetVector.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Now that ArmSetMemoryAttributes() permits a mask to be provided, we can
simplify the implementation the UEFI memory attribute protocol
substantially, and just pass on the requested mask to be set or cleared
directly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Now that we have a generic method to manage memory permissions using a
PPI, we can switch to the generic version of the DXE handoff code in
DxeIpl, and drop the ARM specific version.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Implement the newly defined PPI that permits the PEI core and DXE IPL to
manage memory permissions on ranges of DRAM, for doing things like
mapping the stack non-executable, or granting executable permissions to
shadowed PEIMs.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Currently, ArmSetMemoryAttributes () takes a combination of
EFI_MEMORY_xx constants describing the memory type and permission
attributes that should be set on a region of memory. In cases where the
memory type is omitted, we assume that the memory permissions being set
are final, and that existing memory permissions can be discarded.
This is problematic, because we aim to map memory non-executable
(EFI_MEMORY_XP) by default, and only relax this requirement for code
regions that are mapped read-only (EFI_MEMORY_RO). Currently, setting
one permission clears the other, and so code managing these permissions
has to be aware of the existing permissions in order to be able to
preserve them, and this is not always tractable (e.g., the UEFI memory
attribute protocol implements an abstraction that promises to preserve
memory permissions that it is not operating on explicitly).
So let's add an AttributeMask parameter to ArmSetMemoryAttributes(),
which is permitted to be non-zero if no memory type is being provided,
in which case only memory permission attributes covered in the mask will
be affected by the update.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
