Remedy Redfish service discovery flow changes made
in commit 8736b8fd.
The above fix creates the dependency with SMBIOS 42h record,
which has a problem as SMBIOS 42h may not be created when
RedfishDiscovery.Supported() is invoked even all of the
required protocols are ready on the ControllerHandle. We can’t
guarantee SMBIOS 42 structure will be always created before
ConnectController(). USB NIC maybe detected late and it means
PlatformHostInterfaceBmcUsbNicLib can populate SMBIOS 42h
information late as well. Calling to
RedfishServiceGetNetworkInterface with the previous fix may
result in no network interface for BMC-exposed NIC as SMBIOS
42h is not ready yet.This is the first issue.
Second, to skip the network interface when
NetworkInterfaceGetSubnetInfo() returns a failure also has
problem, as the NIC may be configured via RestEx->Configure().
This happens after the Host interface is discovered, as at this
moment we have the sufficient network information to configure
BMC-exposed NIC.
Base on Redfish spec in 31.1.5.2, “EFI Redfish Client may provide
selection UI of network interfaces for Redfish service discovery.",
This means edk2 Redfish client gets all network interfaces
through RedfishServiceGetNetworkInterface and choose the desired
network interface at its discretion for Redfish service.
So the fix here is:
1. In BuildNetworkInterface(), we don’t skip any network
interface. In RedfishServiceGetNetworkInterface, we don’t
skip any network interface even the subnet information is not
retrieved. We will still return all of network interfaces to
client.
2. In RedfishServiceAcquireService for
EFI_REDFISH_RISCOVER_HOST_INTERFACE case, we don’t skip any
network interface even the subnet information is not
retrieved.
3. Added some more debug information.
Note: The subnet information is used for the scenario the system
is managed by a centralized Redfish service (not on BMC), says
the multiple Redfish computer system instances. As it mentions
in 31.1.5.2, Redfish client they may have to know the subnet
information so they can know the network domain the NIC is
connected. There may have multiple subnets in the corporation
network environment. So the subnet information provides client
an idea when they choose the network interface, so does VLAN ID.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nicklew@nvidia.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Mike Maslenkin <mike.maslenkin@gmail.com>
Reviewed-by: Igor Kulchytskyy <igork@ami.com>
Acked-by: Mike Maslenkin <mike.maslenkin@gmail.com>
Shim's PE loader uses the EFI memory attributes protocol in a way that
results in an immediate crash when invoking the loaded image, unless the
base and size of its executable segment are both aligned to 4k.
If this is not the case, it will strip the memory allocation of its
executable permissions, but fail to add them back for the executable
region, resulting in non-executable code. Unfortunately, the PE loader
does not even bother invoking the protocol in this case (as it notices
the misalignment), making it very hard for system firmware to work
around this by attempting to infer the intent of the caller.
So let's introduce a QEMU command line option to indicate that the
protocol should not be exposed at all, and a PCD to set the default for
this option when it is omitted.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://gitlab.com/qemu-project/qemu/-/issues/1990
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Modify the gSmmBaseHobGuid consumption code to
remove the asuumption that there is only one
gSmmBaseHobGuid. If the CPU number is big enough,
there will be more than one SmmBaseHob in the
HOB list.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Consume MpInfo2Hob in PiSmmCpuDxe driver to get
NumberOfProcessors, MaxNumberOfCpus and
EFI_PROCESSOR_INFORMATION for all CPU from the
MpInformation2 HOB.
This can avoid calling MP service.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Build MpInfo2HOB in CpuMpPei module so that later
PiSmmCpuDxe or other StandaloneMm module can consume
the HOB.
Since there might be more one gMpInformationHobGuid2
in HOB list, CpuMpPei create a gMpInformationHobGuid2
with 0 value NumberOfProcessors field in the end of the
process to indicate it's the last MP_INFORMATION2_HOB.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Create gMpInformationHobGuid2 in UefiCpuPkg.
Currently, there is a gMpInformationHobGuid defined,
created and consumed only in StandaloneMmPkg. The HOB
contains the EFI_PROCESSOR_INFORMATION structure for
each CPU and the number of processors. This is the same
as the information that PiSmmCpuDxeSmm uses MpService
Protocol to get.
This new gMpInformationHobGuid2 also contains the
NumberOfProcessors and the EFI_PROCESSOR_INFORMATION
for each CPU. Also the HOB is extended to support the
case that the maximum HOB length is not enough for all
CPU. So there might be more than one HOB instance in the
HOB list. Each HOB describes the corresponding CPU index
range.
The plan is to create gMpInformationHob2Guid in CpuMpPei
module(implemented in next commit). Then PiSmmCpuDxeSmm
and other MM_STANDALONE modules can consume the hob. This
can avoid calling MpService Protocol in PiSmmCpuDxeSmm.
Also the issue that one gMpInformationHobGuid might be not
enough when CPU number is 1~2000 or bigger can be solved.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
The struct used for GHCB-based page-state change requests uses a 40-bit
bit-field for the GFN, which is shifted by PAGE_SHIFT to generate a
64-bit address. However, anything beyond 40-bits simply gets shifted off
when doing this, which will cause issues when dealing with 1TB+
addresses. Fix this by casting the 40-bit GFN values to 64-bit ones
prior to shifting it by PAGE_SHIFT.
Fixes: ade62c18f4 ("OvmfPkg/MemEncryptSevLib: add support to validate system RAM")
Signed-off-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20231115175153.813213-1-michael.roth@amd.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
This patch is to complete 170d4ce8, sync the change to BaseXApicLib.
Checking the max cpuid leaf is not enough to figure whenever
CPUID_V2_EXTENDED_TOPOLOGY is supported. Intel SDM says:
Software must detect the presence of CPUID leaf 1FH by verifying
(a) the highest leaf index supported by CPUID is >= 1FH, and
(b) CPUID.1FH:EBX[15:0] reports a non-zero value.
The same is true for CPUID leaf 0BH.
This patch adds the EBX check to GetProcessorLocation2ByApicId(). The
patch also fixes the existing check in GetProcessorLocationByApicId() to
be in line with the spec by looking at bits 15:0. The comments are
updated with a quote from the Intel SDM.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Message-Id: <20231115111553.6592-2-jiaxin.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
8259InterruptControllerDxe is not used by any platforms at this point,
remove it.
This patch removes mentions of the following CSM resources from the source
code:
- GUIDs (protocols or otherwise):
- gEfiLegacy8259ProtocolGuid
- headers:
- Protocol/Legacy8259.h
- PCDs:
- Pcd8259LegacyModeEdgeLevel
- Pcd8259LegacyModeMask
which extends the list of resources scheduled for removal to:
- GUIDs (protocols or otherwise):
- gEfiLegacy8259ProtocolGuid
- headers:
- Protocol/Legacy8259.h
- PCDs:
- Pcd8259LegacyModeEdgeLevel
- Pcd8259LegacyModeMask
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4588
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231110235820.644381-35-lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The <FrameworkDxe.h> header is not used by any source file at this point,
remove it.
<FrameworkDxe.h> is a thin wrapper for including all header files under
the "OvmfPkg/Csm/Include/Framework" directory. Remove that directory at
the same time (nothing else references contents in that directory
directly).
Consequently, the "OvmfPkg/Csm/Include" directory becomes empty, and git
automatically deletes it; remove that include path from
"OvmfPkg/OvmfPkg.dec".
This shrinks the list of resources scheduled for removal to:
- GUIDs (protocols or otherwise):
- SYSTEM_ROM_FILE_GUID (1547B4F3-3E8A-4FEF-81C8-328ED647AB1A)
- gEfiLegacy8259ProtocolGuid
- headers:
- Protocol/Legacy8259.h
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4588
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231110235820.644381-28-lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
CsmSupportLib is not used by any platform at this point, remove it.
This patch removes mentions of the following CSM resources from the source
code [*]:
- GUIDs (protocols or otherwise):
- SYSTEM_ROM_FILE_GUID (1547B4F3-3E8A-4FEF-81C8-328ED647AB1A)
- gEfiFirmwareVolumeProtocolGuid (by cutting the
<Protocol/FirmwareVolume.h> link)
- gEfiLegacyBiosPlatformProtocolGuid
- gEfiLegacyBiosProtocolGuid
- gEfiLegacyInterruptProtocolGuid
- headers:
- FrameworkDxe.h
- Protocol/FirmwareVolume.h
- Protocol/LegacyBiosPlatform.h
- Protocol/LegacyInterrupt.h
which extends the list of resources scheduled for removal to:
- GUIDs (protocols or otherwise):
- SYSTEM_ROM_FILE_GUID (1547B4F3-3E8A-4FEF-81C8-328ED647AB1A)
- gEfiFirmwareVolumeProtocolGuid
- gEfiLegacy8259ProtocolGuid
- gEfiLegacyBiosPlatformProtocolGuid
- gEfiLegacyBiosProtocolGuid
- gEfiLegacyInterruptProtocolGuid
- headers:
- FrameworkDxe.h
- Protocol/FirmwareVolume.h
- Protocol/Legacy8259.h
- Protocol/LegacyBios.h
- Protocol/LegacyBiosPlatform.h
- Protocol/LegacyInterrupt.h
[*] Note that gEfiLegacyRegion2ProtocolGuid, while a CSM-related protocol,
cannot be scheduled for removal, because the protocol GUID is defined in
"MdePkg.dec", and it's not only "OvmfPkg/Csm/CsmSupportLib" that produces
it in all of edk2, but also "MdeModulePkg/Universal/LegacyRegion2Dxe" (not
used by OVMF). For the same reason, the "Protocol/LegacyRegion2.h" header
(from MdePkg) cannot be scheduled for removal.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4588
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231110235820.644381-23-lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
CsmSupportLib is effectively a hack. It produces the following protocols:
- Legacy Bios Platform,
- Legacy Interrupt,
- Legacy Region2.
(Note that the "OvmfPkg/Csm/CsmSupportLib/CsmSupportLib.inf" file contains
an error where it claims that "Legacy Bios Platform" is "consumed" -- it
is not; the lib instance produces that protocol).
At the same time, the library instance consumes
gEfiLegacyBiosProtocolGuid.
This *seemingly* creates a circular dependency with LegacyBiosDxe, because
that driver has the exact opposite protocol usage patterns. The solution
is that LegacyBiosDxe has a DEPEX on the protocols produced by
CsmSupportLib, while CsmSupportLib consumes the Legacy Bios Protocol from
LegacyBiosDxe only in the member functions of the protocols it produces.
Therefore, once BdsDxe is dispatched, and the CsmSupportLib constructor
exposes those three protocols, LegacyBiosDxe can also be started by the
DXE dispatcher, and then the protocols from CsmSupportLib become
functional.
But the main reason why CsmSupportLib is a hack is that it should be a
normal platform DXE driver (called e.g. "CsmSupportDxe"), and not a NULL
class library that's randomly hooked into BdsDxe.
Given that we have removed LegacyBiosDxe earlier (so there is no DEPEX we
need to satisfy now, conceptually), unhook CsmSupportLib from BdsDxe.
--*--
Note that in the BhyveX64 platform, the pathname
"OvmfPkg/Bhyve/Csm/CsmSupportLib/CsmSupportLib.inf" is bogus, and has
always been, since commit 656419f922 ("Add BhyvePkg, to support the
bhyve hypervisor", 2020-07-31).
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Corvin Köhne <corvink@freebsd.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4588
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20231110235820.644381-22-lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
