RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3325
1. AsmReadMsr64() in X64/GccInlinePriv.c
AsmReadMsr64 can return uninitialized value if FilterBeforeMsrRead
returns False. This causes build error with the CLANG toolchain.
2. AsmWriteMsr64() in X64/GccInlinePriv.c
In the case that FilterBeforeMsrWrite changes Value and returns True,
The original Value, not the changed Value, is written to the MSR.
This behavior is different from the one of AsmWriteMsr64() in
X64/WriteMsr64.c for the MSFT toolchain.
Signed-off-by: Takuto Naito <naitaku@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
CpuPause() might allow the CPU to go into a lower power state
state while we spin.
On X86, CpuPause() executes a PAUSE instruction which the Intel
and AMD specs describe as follows:
Intel:
"PAUSE: An additional function of the PAUSE instruction is to reduce
the power consumed by a processor while executing a spin loop. A
processor can execute a spin-wait loop extremely quickly, causing the
processor to consume a lot of power while it waits for the resource it
is spinning on to become available. Inserting a pause instruction in a
spin-wait loop greatly reduces the processor?s power consumption."
AMD:
"PAUSE: Improves the performance of spin loops, by providing a hint to
the processor that the current code is in a spin loop. The processor
may use this to optimize power consumption while in the spin loop.
Architecturally, this instruction behaves like a NOP instruction."
On RISC-V and ARM64, CpuPause() executes a NOP, which is no worse than
the tight loop we have.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Correct the memory offsets used in REG_ONE/REG_PAIR macros to
synchronize them with definition of the BASE_LIBRARY_JUMP_BUFFER
structure on AArch64.
The REG_ONE macro declares only a single 64-bit register be
read/written; however, the subsequent offset is 16 bytes larger,
creating an unused memory gap in the middle of the structure and
causing SetJump/LongJump functions to read/write 8 bytes of memory
past the end of the jump buffer struct.
Signed-off-by: Jan Bobek <jbobek@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
VMGEXIT is a new instruction used for Hypervisor/Guest communication when
running as an SEV-ES guest. A VMGEXIT will cause an automatic exit (AE)
to occur, resulting in a #VMEXIT with an exit code value of 0x403.
Since SEV-ES is only supported in X64, provide the necessary X64 support
to execute the VMGEXIT instruction, which is coded as "rep vmmcall". For
IA32, since "vmmcall" is not supported in NASM 32-bit mode and VMGEXIT
should never be called, provide a stub implementation that is identical
to CpuBreakpoint().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
While RISC-V hart is trapped into S-Mode, the S-Mode interrupt
CSR (SIE) is disabled by RISC-V hart. However the (SIE) is enabled
again by RestoreTPL, this causes the second S-Mode trap is triggered
by the machine mode (M-Mode)timer interrupt redirection. The SRET
instruction clear Supervisor Previous Privilege (SPP) to zero
(User mode) in the second S-Mode interrupt according to the RISC-V
spec. Above brings hart to the user mode (U-Mode) when execute
SRET in the nested S-Mode interrupt handler because SPP is set to
User Mode in the second interrupt. Afterward, system runs in U-Mode
and any accesses to S-Mode CSR causes the invalid instruction exception.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2800
Add a new version of BaseLib that is safe for use from host based
unit test applications. Host based unit test applications may need
to provide implementations of some BaseLib functions that provide
simple emulation to exercise the code under test. The structure
UNIT_TEST_HOST_BASE_LIB is filled in with services that provide
default emulation for BaseLib APIs that would normally generate
exceptions in a host based unit test application. This structure
allows an individual unit test to replace the default emulation of
a BaseLib service with an alternate version that is required by a
specific unit test. A global variable of type UNIT_TEST_HOST_BASE_LIB
is provided through the new UnitTestHostBaseLib library class.
Normally cmocka would be used to mock services the code under
test calls. However, the BaseLib is used by the Unit Test
Framework itself, so using a mocked interface is not possible.
The use of a structure to provide hooks for unit test is not
expected to be a common feature. It should only be required
for libraries that are used by both the Unit Test Framework and
the code under test where the code under test requires a
different behavior than the Unit Test Framework.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The EDK II C Coding Standards Specification (v2.20) strongly discourages
variable declarations in nested block scope:
5 Source Files
5.4 Code File Structure
5.4.1 Scoping Rules
5.4.1.1 Scope
> Block (local) Scope
>
> [...]
>
> Data declarations may follow the opening brace of a compound statement,
> regardless of nesting depth, and before any code generating statements
> have been entered. Other than at the outermost block of a function body,
> this type of declaration is strongly discouraged.
Hoist such variable declarations in Base64Decode() to the outermost
function scope.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Fixes: 35e242b698
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1980
Reported-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Use PcdSpeculationBarrierType in the x86 implementation
of SpeculationBarrier() to select between AsmLfence(),
AsmCpuid(), and no operation.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brian J. Johnson <brian.johnson@hpe.com>
Replace the dummy C implementation of SpeculationBarrier() with
implementations consisting of the recommended DSB SY + ISB sequence,
as recommended by ARM in the whitepaper "Cache Speculation Side-channels"
version 2.4, dated October 2018.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Introduce two public functions CharToUpper and AsciiCharToUpper.
They have the same functions as InternalCharToUpper and
InternalBaseLibAsciiToUpper.Considering the internal functions will
be removed,so directly I change their function names to the public ones'.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
X86 specific BaseLib API AsmLfence() was introduced to address the Spectre
Variant 1 (CVE-2017-5753) issue. The purpose of this API is to insert
barriers to stop speculative execution. However, the API is highly
architecture (X86) specific, and thus should be avoided using across
generic code.
To address this issue, this patch will add a new BaseLib API called
SpeculationBarrier(). Different architectures will have different
implementations for this API.
For IA32 and x64, the implementation of SpeculationBarrier() will
directly call AsmLfence().
For ARM and AARCH64, this patch will add a temporary empty implementation
as a placeholder. We hope experts in ARM can help to contribute the actual
implementation.
For EBC, similar to the ARM and AARCH64 cases, a temporary empty
implementation is added.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace multiple, consecutive "\" characters prior to other processing
involving "\" characters. This fixes an issue where "\\..\\..",
"//..//..", and similar input paths are not cleaned properly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@Intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1262
Current implementation of BaseLib APIs:
AsciiStrToUnicodeStr()
AsciiStrToUnicodeStrS()
AsciiStrnToUnicodeStrS()
do not handle EASCII properly.
More specifically, if the value of ASCII character is larger than 0x7F,
then the converted Unicode character will have all '1's in the higher 8
bits.
An example:
0xC9 => 0xFFC9 (current implementations)
and it should be:
0xC9 => 0x00C9
This commit will address this issue.
Cc: Bin.Lain <bin_601@mail2000.com.tw>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MdePkg-BaseLib: Fix PathCleanUpDirectories() error involving "\..\.."
The loop that removes "xxxx\..\" errs when multiple "\.." sequences are
in the path. Before this change the code would modify a path like
"FS0:\efi\tools\..\.." to "FS0:\efi\\.." and then to "FS0:\efi\", but
the correct path is "FS0:\".
You can test the effect of this change in the shell by setting the
current directory to something like FS0:\efi\boot and then executing
the command "ls ..\..". Before the change you will see the files in
the FS0:\efi directory; after the change, you will see the files in
the root directory of FS0:.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jim Dailey <jim_dailey@dell.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Removing rules for Ipf sources file:
* Remove the source file which path with "ipf" and also listed in
[Sources.IPF] section of INF file.
* Remove the source file which listed in [Components.IPF] section
of DSC file and not listed in any other [Components] section.
* Remove the embedded Ipf code for MDE_CPU_IPF.
Removing rules for Inf file:
* Remove IPF from VALID_ARCHITECTURES comments.
* Remove DXE_SAL_DRIVER from LIBRARY_CLASS in [Defines] section.
* Remove the INF which only listed in [Components.IPF] section in DSC.
* Remove statements from [BuildOptions] that provide IPF specific flags.
* Remove any IPF sepcific sections.
Removing rules for Dec file:
* Remove [Includes.IPF] section from Dec.
Removing rules for Dsc file:
* Remove IPF from SUPPORTED_ARCHITECTURES in [Defines] section of DSC.
* Remove any IPF specific sections.
* Remove statements from [BuildOptions] that provide IPF specific flags.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit adds an addtional check in AsciiStriCmp. It
explicitly checks the end of the sting pointed by 'SecondString' to make
the code logic easier for reading and to prevent possible mis-reports by
static code checkers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <Hao.a.wu@intel.com>
