We are preparing for detaching the S3Ready() functionality from the
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() protocol member function. Instead, we
will hook the same logic to the End-of-Dxe event group.
The EFI_ACPI_S3_SAVE_PROTOCOL has another member: GetLegacyMemorySize().
According to the documenation,
This function returns the size of the legacy memory (meaning below 1 MB)
that is required during an S3 resume. Before the Framework-based
firmware transfers control to the OS, it has to transition from flat
mode into real mode in case the OS supplies only a real-mode waking
vector. This transition requires a certain amount of legacy memory.
After getting the size of legacy memory below, the caller is responsible
for allocating the legacy memory below 1 MB according to the size that
is returned. The specific implementation of allocating the legacy memory
is out of the scope of this specification.
When EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() is called, the address of the
legacy memory allocated above must be passed to it, in the
LegacyMemoryAddress parameter.
In practice however:
- The S3Ready() function ignores the LegacyMemoryAddress completely.
- No code in the edk2 tree calls
EFI_ACPI_S3_SAVE_PROTOCOL.GetLegacyMemorySize(), ever.
- All callers of this specific implementation of
EFI_ACPI_S3_SAVE_PROTOCOL.S3Save() in the edk2 tree pass a NULL
LegacyMemoryAddress:
BdsLibBootViaBootOption()
[IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c]
For this reason, ASSERT() explicitly that LegacyGetS3MemorySize() is never
called, and that the LegacyMemoryAddress parameter is always NULL.
This fact is important to capture in the code, because in the End-of-Dxe
callback, no LegacyMemoryAddress parameter can be taken. So let's make it
clear that we actually don't even have any use for that parameter.
This patch ports the identical change from IntelFrameworkModulePkg to
OvmfPkg.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18033 6f19259b-4bc3-4df7-8a09-765794883524
that assumes the SMRAM reserved range is only at the end of the SMRAM descriptor.
//
// This range has reserved area, calculate the left free size
//
gSmmCorePrivate->SmramRanges[Index].PhysicalSize = SmramResRegion->SmramReservedStart - gSmmCorePrivate->SmramRanges[Index].CpuStart;
Imagine the following scenario where we just reserve the first page of the SMRAM range:
SMRAM Descriptor:
Start: 0x80000000
Size: 0x02000000
Reserved Range:
Start: 0x80000000
Size: 0x00001000
In this case the adjustment to the SMRAM range size yields zero: ReservedStart - SMRAM Start is 0x80000000 - 0x80000000 = 0.
So even though most of the range is still free the IPL code decides its unusable.
The problem comes from the email thread: [edk2] PiSmmIpl SMRAM Reservation Logic.
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/15268
Also to follow the idea in the email thread, the patch is to
1. Keep only one copy of full SMRAM ranges in gSmmCorePrivate->SmramRanges,
split record for SmmConfiguration->SmramReservedRegions and SMM Core that
will be marked to be EFI_ALLOCATED in gSmmCorePrivate->SmramRanges.
2. Handle SmmConfiguration->SmramReservedRegions at beginning of, at end of,
in the middle of, or cross multiple SmramRanges.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18031 6f19259b-4bc3-4df7-8a09-765794883524
1. Get default terminal type from PCD rather than using PCANSI
directly in BuildTeminalDevpath;
2. Only terminal type is needed to create an TerminalDev instance, so
remove the useless code of creating and freeing DefaultNode.
3. Some white space refining.
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18027 6f19259b-4bc3-4df7-8a09-765794883524
Change default terminal type to be consistent with default
ConIn/ConOut device path, which is now determined by TTY_TERMINAL
flag, TTYTERM or VT100.
I can't say this is a bug, as we can pass the whole console device
path to ConnectController, and TerminalDxe driver will pick up the
terminal in the remaining device path. However, in rare circumstances,
the console devices may be disconnected with the driver, and they will
be ignored by ConPlatformDxe until we pass the device path explicitly
just as BDS.
Changing default terminal type to be the same with console device
path could help serial terminal be reconnected with normal connect
controller operation.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18025 6f19259b-4bc3-4df7-8a09-765794883524
Add the check at DxeLoadCore() on MdeModulePkg\Core\DxeIplPeim\DxeLoad.c
to skip install the "gEfiMemoryTypeInformationGuid" hob if it is already
installed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18018 6f19259b-4bc3-4df7-8a09-765794883524
Add the unspecified address check for DNS6 StationIp,
so the underlying driver will choose the source address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18017 6f19259b-4bc3-4df7-8a09-765794883524
Add CpuMpEndOfPeiCallback () to restore wakeup buffer data on S3 path and flag
flag wakeup buffer to be un-used type on normal boot path. Set one EndOfPei
flag save/restore wakeup buffer when wakeup APs every time.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18014 6f19259b-4bc3-4df7-8a09-765794883524
Add AsmHltLoop () in assembly code, it will not be copied into AP wakeup
buffer and invoked at end of ApCFunction (). To make sure AP work in case
AP wakeup buffer is restored to original data.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18013 6f19259b-4bc3-4df7-8a09-765794883524
Get CPU BIST information from SEC Platform Information(2) PPIs and update them
accordingly. Install(Reinstall) SEC Platform Information2 PPI to published the
new CPU BIST.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18004 6f19259b-4bc3-4df7-8a09-765794883524
Search memory resource HOB list to find one available system memory under 1MB
for AP reset code and exchange information between BSP and APs.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17989 6f19259b-4bc3-4df7-8a09-765794883524
Dhcp6Dxe driver uses a new added dynamic PCD PcdDhcp6UidType in
NetworkPkg, but typically a pure UEFI driver are configured to
not allowed to access the dynamic PCDs in most platform, thus will
cause Dhcp6Dxe assert when it started. This patch add more PCD
access method types for module to use the PcdDhcp6UidType value
to fix the issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17986 6f19259b-4bc3-4df7-8a09-765794883524
