Previous to this change, PvScsiFreeRings() was not undoing all
operations that was done by PvScsiInitRings().
This is because PvScsiInitRings() was both preparing rings (Allocate
memory and map it for device DMA) and setup the rings against device by
issueing a device command. While PvScsiFreeRings() only unmaps the rings
and free their memory.
Driver do not have a functional error as it makes sure to reset device
before every call site to PvScsiFreeRings(). However, this is not
intuitive.
Therefore, prefer to refactor the setup of the ring against device to a
separate function than PvScsiInitRings().
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331225637.123318-1-liran.alon@oracle.com>
[lersek@redhat.com: rename FreeDMACommBuffer label to FreeDmaCommBuffer]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Sean reported that VS2019 build produce the following build error:
INFO - PvScsi.c
INFO - Generating code
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): error C2220: the
following warning is treated as an error
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): warning C4244: '=':
conversion from 'const UINT16' to 'UINT8', possible loss of data
This result from an implicit cast from PVSCSI Response->ScsiStatus
(Which is UINT16) to Packet->TargetResponse (Which is UINT8).
Fix this issue by adding an appropriate explicit cast and verify with
assert that this truncation do not result in loss of data.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2651
Reported-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331110452.51992-1-liran.alon@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: rewrap VS2019 diags in commit msg for PatchCheck.py]
In case device is constrained by IOMMU or guest is running under AMD SEV,
input/output buffers provided to device (DataBuffer and SenseData) needs
to be explicitly mapped to device by PciIo->Map().
To avoid the overhead of mapping/unmapping the DataBuffer and SenseData
to the device for every SCSI requst (and to simplify code), introduce a
single DMA communication buffer that will be mapped to device on
initialization. When a SCSI request needs to be sent to device, the
DataBuffer and SenseData will be copied from/to the DMA communication
buffer as required. This will be done by the following commits.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-15-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement EXT_SCSI_PASS_THRU.GetNextTarget() and
EXT_SCSI_PASS_THRU.GetNextTargetLun().
ScsiBusDxe scans all MaxTarget * MaxLun possible devices.
This can take unnecessarily long for large number of targets.
To deal with this, VirtioScsiDxe has defined PCDs to limit the
MaxTarget & MaxLun to desired values which gives sufficient
performance. It is very important in virtio-scsi as it can have
very big MaxTarget & MaxLun.
Even though a common PVSCSI device has a default MaxTarget=64 and
MaxLun=0, we implement similar mechanism as virtio-scsi for completeness.
This may be useful in the future when PVSCSI will have bigger values
for MaxTarget and MaxLun.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-7-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Building OVMF for X64 with secure boot enabled on VS2019 results in
the following error:
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
error C2220: the following warning is treated as an error
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
warning C4244: '=': conversion from 'UINTN' to 'UINT32', possible loss of data
Suppress the error by making the cast explicit.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2636
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
GCC 4.8 or 4.9 may throw the following error when building OVMF:
Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:
In function ‘QemuLoadKernelImage’:
Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:416:30:
error: ‘CommandLine’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
UnicodeSPrintAsciiFormat (
cc1: all warnings being treated as errors
This is due to the fact that older GCCs fail to infer that CommandLine is
never actually used unless it has been assigned. So add a redundant NULL
assignment to help these older GCCs understand this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2630
Fixes: 7c47d89003 ("OvmfPkg: implement QEMU loader library for X86 with ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
FaultTolerantWritePei consumes:
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase.
VariablePei consumes:
- PcdFlashNvStorageVariableBase64.
Due to the previous patches in this series, the above PCDs are available
in the PEI phase, in the SMM_REQUIRE build.
FaultTolerantWritePei produces a GUID-ed HOB with
FAULT_TOLERANT_WRITE_LAST_WRITE_DATA as contents. It also installs a Null
PPI that carries the same gEdkiiFaultTolerantWriteGuid as the HOB.
VariablePei depends on the Null PPI mentioned above with a DEPEX, consumes
the HOB (which is safe due to the DEPEX), and produces
EFI_PEI_READ_ONLY_VARIABLE2_PPI.
This enables read-only access to non-volatile UEFI variables in the PEI
phase, in the SMM_REQUIRE build.
For now, the DxeLoadCore() function in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c" will not access the
"MemoryTypeInformation" variable, because OVMF's PlatformPei always
produces the MemoryTypeInformation HOB.
(Note: when the boot mode is BOOT_ON_S3_RESUME, PlatformPei doesn't build
the HOB, but that's in sync with DxeLoadCore() also not looking for either
the HOB or the UEFI variable.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-5-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
The following flash-related base addresses:
- PcdFlashNvStorageVariableBase64,
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase,
are always set to constant (invariable) values in the "-D SMM_REQUIRE"
build of OVMF. (That's because in the SMM build, actual pflash is a hard
requirement, and the RAM-based emulation is never available.)
Set said PCDs statically, at build. This will allow us to depend on their
values in the PEI phase.
When SMM_REQUIRE is FALSE, this change has no effect (confirmed by report
file comparison).
When SMM_REQUIRE is TRUE, the report file shows the following changes:
- "PcdOvmfFlashNvStorageFtwSpareBase" and
"PcdOvmfFlashNvStorageFtwWorkingBase" are no longer consumed by any
module directly,
- for "PcdFlashNvStorageFtwSpareBase", "PcdFlashNvStorageFtwWorkingBase"
and "PcdFlashNvStorageVariableBase64", the access method changes from
DYN to FIXED,
- for the latter PCDs, the zero (dynamic default) values are replaced with
the desired constants.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-4-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2580
Ovmf build failed on Windows with VS2017 tool chain.
The error message like:
OvmfPkg\LinuxInitrdDynamicShellCommand\LinuxInitr
dDynamicShellCommand.c(199): error C2220: warning treated as error -
no 'object' file generated
OvmfPkg\LinuxInitrdDynamicShellCommand\LinuxInitrdDynamicShellCommand.c(199):
warning C4244: '=': conversion from 'UINT64' to 'UINTN',
possible loss of data
This patch is to cast UINT64 type to UINTN type
when doing the variable assignment.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When the MDE_CPU_IA32 macro is not defined, there is no access to the
"KernelImageHandle" local variable in QemuStartKernelImage(). This breaks
the OvmfPkgIa32X64 and OvmfPkgX64 platform builds, at least with gcc-8.
Move the local variable to the inner scope, where declaration and usage
are inseparable.
(Note that such inner-scope declarations are frowned upon in the wider
edk2 codebase, but we use them liberally in ArmVirtPkg and OvmfPkg anyway,
because they help us reason about variable lifetime and visibility.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 7c47d89003
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2572
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Bob reports that VS2017 chokes on a tentative definition of the const
object 'mEfiFileProtocolTemplate', with the following error:
OvmfPkg\QemuKernelLoaderFsDxe\QemuKernelLoaderFsDxe.c(130):
error C2220: warning treated as error - no 'object' file generated
OvmfPkg\QemuKernelLoaderFsDxe\QemuKernelLoaderFsDxe.c(130):
warning C4132: 'mEfiFileProtocolTemplate': const object should be initialized
Let's turn the only function that relies on this tentative definition
into a forward declaration itself, and move its definition after the
external definition of the object. That allows us to drop the tentative
definition of the const object, and hopefully make VS2017 happy.
Cc: "Feng, Bob C" <bob.c.feng@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 859b55443a ("OvmfPkg/PlatformBootManagerLib: switch to
QemuLoadImageLib") replaced a dependency on LoadLinuxLib with one on
QemuLoadImageLib in the PlatformBootManagerLib implementation that is
shared between all OVMF builds, without taking into account that even
the Xen targeted builds incorporate this code, which is only used to
load kernels passed via the QEMU command line.
Since this is dead code on Xen, we can satisfy the dependency using
the generic version of QemuLoadImageLib, which does not rely on
LoadLinuxLib, which we can therefore drop from OvmfXen.dsc.
Fixes: 859b55443a
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The QemuLoadImageLib implementation we currently use for all OVMF
builds copies the behavior of the QEMU loader code that precedes it,
which is to disregard UEFI secure boot policies entirely when it comes
to loading kernel images that have been specified on the QEMU command
line. This behavior deviates from ArmVirtQemu based builds, which do
take UEFI secure boot policies into account, and refuse to load images
from the command line that cannot be authenticated.
The disparity was originally due to the fact that the QEMU command line
kernel loader did not use LoadImage and StartImage at all, but this
changed recently, and now, there are only a couple of reasons left to
stick with the legacy loader:
- it permits loading images that lack a valid PE/COFF header,
- it permits loading X64 kernels on IA32 firmware running on a X64
capable system.
Since every non-authentic PE/COFF image can trivially be converted into
an image that lacks a valid PE/COFF header, the former case can simply
not be supported in a UEFI secure boot context. The latter case is highly
theoretical, given that one could easily switch to native X64 firmware in
a VM scenario.
That leaves us with little justification to use the legacy loader at all
when UEFI secure boot policies are in effect, so let's switch to the
generic loader for UEFI secure boot enabled builds.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Linux v5.7 will introduce a new method to load the initial ramdisk
(initrd) from the loader, using the LoadFile2 protocol installed on a
special vendor GUIDed media device path.
Add support for this to our QEMU command line kernel/initrd loader.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Replace the open coded sequence to load Linux on x86 with a short and
generic sequence invoking QemuLoadImageLib, which can be provided by
a generic version that only supports the LoadImage and StartImage boot
services, and one that incorporates the entire legacy loading sequence
as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement another version of QemuLoadImageLib that uses LoadImage and
StartImage, but falls back to the legacy Linux loader code if that
fails. The logic in the legacy fallback routines is identical to the
current QEMU linux loader for X64 and IA32.
Note the use of the OVMF_LOADED_X86_LINUX_KERNEL protocol for the legacy
loaded image: this makes it possible to expose the LoadImage/StartImage
abstraction for the legacy loader, using the EFI paradigm of identifying
a loaded image solely by a handle.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In preparation of moving the legacy x86 loading to an implementation
of the QEMU load image library class, introduce a protocol header
and GUID that we will use to identify legacy loaded x86 Linux kernels
in the protocol database.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On x86, the kernel image consists of a setup block and the actual kernel,
and QEMU presents these as separate blobs, whereas on disk (and in terms
of PE/COFF image signing), they consist of a single image.
So add support to our FS loader driver to expose files via the abstract
file system that consist of up to two concatenated blobs, and redefine
the kernel file so it consists of the setup and kernel blobs, on every
architecture (on non-x86, the setup block is simply 0 bytes and is
therefore ignored implicitly)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We have no need for exposing the kernel command line as a file,
so remove support for that. Since the remaining blobs (kernel
and initrd) are typically much larger than a page, switch to
the page based allocator for blobs at the same time.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement QemuLoadImageLib, and make it load the image provided by the
QEMU_EFI_LOADER_FS_MEDIA_GUID/kernel device path that we implemented
in a preceding patch in a separate DXE driver, using only the standard
LoadImage and StartImage boot services.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Expose the existing implementation of an abstract filesystem exposing
the blobs passed to QEMU via the command line via a standalone DXE
driver.
Notable difference with the original code is the switch to a new vendor
GUIDed media device path, as opposed to a vendor GUID hardware device
path, which is not entirely appropriate for pure software constructs.
Since we are using the GetTime() runtime service in a DXE_DRIVER type
module, we need to DEPEX explicitly on gEfiRealTimeClockArchProtocolGuid.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In an upcoming patch, we will introduce a separate DXE driver that
exposes the virtual SimpleFileSystem implementation that carries the
kernel and initrd passed via the QEMU command line, and a separate
library that consumes it, to be incorporated into the boot manager.
Since the GUID used for the SimpleFileSystem implementation's device
path will no longer be for internal use only, create a well defined
GUID to identify the media device path.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
