d69d9227d0 caused system firmware update
failure. It is because FindMatchingFmpHandles() is expected to return
handles matched, but the function returns all handles found.
This patch is to fix the issue.
This patch also assigns mSystemFmpPrivate->Handle for "case 1:" path
in case the Handle is needed by other place in future.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This debug message should be info instead of error. This patch is to
change the debug level to DEBUG_INFO.
DEBUG((DEBUG_ERROR, "checking FV....0x%08x - 0x%x\n",
FvHeader, FvHeader->FvLength)); // "Mark"
This comment is inaccurate. This patch is to remove it.
//
// Check section
//
This debug message should be removed as FvHeader may have been out of
range FdStart and FdSize, and the loop will go to "Mark" above again if
FvHeader is not out of range FdStart and FdSize, and then that debug
message will be shown. This patch is to remove this debug message.
DEBUG((DEBUG_ERROR, "Next FV....0x%08x - 0x%x\n",
FvHeader, FvHeader->FvLength));
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Amy Chan <amy.chan@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=928
Uninstall all System FMP Protocols for the current FW device.
If an FMP Protocol for the current FW device is already present,
then install the new System FMP protocol onto the same handle as
the FMP Protocol. Otherwise, install the FMP protocol onto a
new handle.
This supports use cases where multiple capsules for the
same system firmware device are processed on the same
boot of the platform. It guarantees there is at most one
FMP protocol for each system firmware device.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If PCD value is not set, register PcdCallBack to hook PCD value set
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update logic to install FvInfo PPI with its file system guid.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
It is the follow up of commits 51f0ceb..9e32e97 to replace
AsciiValueToString/UnicodeValueToString with
AsciiValueToStringS/UnicodeValueToStringS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Since the next patch will add AsciiStrToGuid in BaseLib, renaming
the internal function AsciiStrToGuid to IniAsciiStrToGuid to avoid
link failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
1. Change _SECTION_ITEM to _INI_SECTION_ITEM
2. Change _COMMENT_LINE to _INI_COMMENT_LINE
Because _SECTION_ITEM and _COMMENT_LINE are duplicated with
the one defined in IntelFrameworkModulePkg\Universal\
FirmwareVolume\UpdateDriverDxe\UpdateDriver.h
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add SystemFirmwareDxe.h to [Sources] section of INF file.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add RecoveryModuleLoadPei.h to [Sources] section of INF file.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Fix incorrect Guid/Pcd format issues in INF file.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
According to UEFI spec, unsupported function should return EFI_UNSUPPORTED
directly.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Function GetStringFromDataFile() ensures its fourth (output) parameter
will not be NULL when the return status is EFI_SUCCESS.
This commit adds ASSERT as warnings for the case that will not happen.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RecoveryModuleLoadPei supports recovery system firmware via FMP capsule.
RecoveryModuleLoadPei produces EFI_PEI_RECOVERY_MODULE_PPI. It is invoked
by DxeIpl in recovery boot mode.
LoadRecoveryCapsule() will scan all possible
gEfiPeiDeviceRecoveryModulePpiGuid and get EDKII system FMP capsule there.
LoadRecoveryCapsule() will perform the FMP authentication and version
check. If and only if the FMP authentication passes, and EDKII system FMP
capsule version is equal to the current system firmware Version, the
recovery will be performed. Or this capsule image is discard.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
SystemFirmwareUpdate supports update system firmware via UEFI FMP capsule.
SystemFirmwareReportDxe.inf can be included in system BIOS. It is a
lightweight FMP protocol implementation and it only reports FMP
information, so that ESRT table can report the system firmware
information. SetImage() will dispatch the driver FV in the EDKII system
FMP image (SystemFirmwareUpdateDxe),
then pass thru the SetImage() request to latter.
SystemFirmwareUpdateDxe.inf can be included in EDKII system capsule image.
It is a full feature FMP protocol implementation and supports SetImage().
It can be used to update the system firmware.
SystemFirmwareUpdateDxe.inf can also be included in system firmware.
If so SystemFirmwareReportDxe.inf is not needed.
SystemFirmwareUpdateDxe SetImage() will perform the FMP authentication and
version check. If and only if the FMP authentication passes, and new
EDKII system capsule version is no less than current system firmware
LowestSupportedVersion, the system firmware will be updated.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
1) Add capsule related GUID.
EdkiiSystemFmpCapsule
2) Add capsule related library.
EdkiiSystemCapsuleLib
IniParsingLib
PlatformFlashAccessLib
3) Add EDKII system capsule related DynamicEx PCD
PcdEdkiiSystemFirmwareImageDescriptor
PcdEdkiiSystemFirmwareFileGuid
NOTE: We use DynamicEx here because the update driver may be in
the capsule FMP, instead of system firmware.
The update driver MUST use the PCD info produced system firmware.
4) Add Test key file PCD
These PCDs indicate the GUID of FFS which contains test key file.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>
