Initialize local variable to suppress warning C4703:
potentially uninitialized local pointer variable.
Both reads (dereferences) of "PciRootBridgeIo" in
PciBusDriverBindingStart() are only reached if
"gFullEnumeration" is TRUE on entry *and* we successfully
open the EfiPciRootBridgeIoProtocol interface.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit a012bf6e3e)
Install IOMMU PPI for pre-memory phase and return
EFI_NOT_AVAILABLE_YET to indicate that DMA protection has been enabled,
but DMA buffer are not available to be allocated yet.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 20b58eb850)
Within function NvmExpressPassThru():
The data buffer for the below 2 Admin command:
Create I/O Completion Queue command (Opcode 01h)
Create I/O Submission Queue command (Opcode 05h)
are not mapped to the PCI controller specific addresses.
But the current code logic also prevents the below NVM command:
Write (Opcode 01h)
from mapping its data buffer.
Hence, this commit refine the logic to resolve this issue.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 748cd9a680)
Per PI spec, the PciEnumerationComplete protocol installation
should be after PciIo installation.
Today's implementation installs the PciEnumerationComplete
after hardware enumeration is completed, but before PciIo
installation.
The change corrects the spec/implementation gap.
The change also benefits certain implementation that depends on
the PciIo handle in PciEnumerationComplete callback.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 42e8bc7d16)
The patch is just a code cleanup with no functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 2632981783)
It didn't cause big issues when VT-d was disabled.
But in VT-d enabled platform, lack of EhcFreeUrb call caused
the DMA data was not moved back to user's buffer.
It caused the correct data cannot be got through sync interrupt
transfer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit c74805f1e7)
Update the UhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 8284b1791e)
This patch is following 2c656af04d.
1. Fix typo "XHC" to "EHC".
2. Reinitialize Request(Phy/Map) and Data(Phy/Map)
in Urb, otherwise the last time value of them may
be used in error handling when error happens.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit c34a5aab53)
1. Call IoMmuInit() after locating gPeiUsbControllerPpiGuid.
2. Call XhcPeiFreeSched() to do cleanup in XhcEndOfPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 0aa1794118)
V2: Halt HC at EndOfPei.
Update the EhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 2c656af04d)
Update the SdBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 77af86688c)
Update the EmmcBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 85ad9a6e0a)
V2 changes:
Resource cleanup logic update in UfsEndOfPei().
V1 history:
Update the UfsBlockIoPei driver to consume IOMMU_PPI to allocate DMA
buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 44a0857ec6)
Update XHCI driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service
to allocate DMA buffer, with assumption that DRAM==DMA.
This is a compatible change.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit b575ca32c8)
This IOMMU_PPI is to provide IOMMU abstraction in PEI.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 2b620ee1ff)
We found there are loops of *2* Maps and only *1* Unmap and
the DMA buffer address is decreasing.
It is caused by the below code flow.
XhcAsyncInterruptTransfer ->
XhcCreateUrb ->
XhcCreateTransferTrb ->
Map Urb->DataMap (1)
Timer: loops of *2* Maps and only *1* Unmap
XhcMonitorAsyncRequests ->
XhcFlushAsyncIntMap ->
Unmap and Map Urb->DataMap (2)
XhcUpdateAsyncRequest ->
XhcCreateTransferTrb ->
Map Urb->DataMap (3)
This patch is to eliminate (3).
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit 0b9c0c6540)
This protocol is to abstract DMA access from IOMMU.
1) Intel "DMAR" ACPI table.
2) AMD "IVRS" ACPI table
3) ARM "IORT" ACPI table.
There might be multiple IOMMU engines on one platform.
For example, one for graphic and one for rest PCI devices
(such as ATA/USB).
All IOMMU engines are reported by one ACPI table.
All IOMMU protocol provider should be based upon ACPI table.
This single IOMMU protocol can handle multiple IOMMU engines on one system.
This IOMMU protocol provider can use UEFI device path to distinguish
if the device is graphic or ATA/USB, and find out corresponding
IOMMU engine.
The IOMMU protocol provides 2 capabilities:
A) Set DMA access attribute - such as write/read control.
B) Remap DMA memory - such as remap above 4GiB system memory address
to below 4GiB device address.
It provides AllocateBuffer/FreeBuffer/Map/Unmap for DMA memory.
The remapping can be static (fixed at build time) or dynamic (allocate
at runtime).
4) AMD "SEV" feature.
We can have an AMD SEV specific IOMMU driver to produce IOMMU protocol,
and manage SEV bit.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Leo Duran <leo.duran@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Previous patch Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Previous patch Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Leo Duran <leo.duran@amd.com>
(cherry picked from commit d1fddc4533)
XCODE5 doesn't support absolute addressing in the assembly code.
This change uses lea instruction to get the address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 62382925c9)
It fixes the warning for loop has empty body [-Werror,-Wempty-body].
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liang Vincent <vincent.liang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit be18cb0305)
* Since wireless network can switch at very short time, the time interval
of reconfig event checking is too long for this case. To achieve better
performance and scalability, separate this task from Ip4 tick timer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
(cherry picked from commit 018432f0ce)
"Entry->Link.ForwardLink = NULL;" is present in RemoveMemoryMapEntry()
for DxeCore, that is correct.
"Entry->Link.ForwardLink = NULL;" is absent in RemoveOldEntry()
for PiSmmCore, that is incorrect.
Without this fix, when FromStack in Entry is TRUE,
the "InsertTailList (&mMapStack[mMapDepth].Link, &Entry->Link);" in
following calling to CoreFreeMemoryMapStack() will fail as the entry
at mMapStack[mMapDepth] actually has been removed from the list.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit e434be3c9c)
Sort and merge memory resource entries to handle the case that
the memory resource HOBs are reported differently between
BOOT_ON_FLASH_UPDATE boot mode and normal boot mode, and the
capsule buffer from UpdateCapsule at normal boot sits across
two memory resource descriptors at BOOT_ON_FLASH_UPDATE boot mode.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Dakota Chiang <dakota.chiang@intel.com>
Tested-by: Dakota Chiang <dakota.chiang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
(cherry picked from commit 032de38a07)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=592
In function UpdateConsoleContent, we compare console name
with "ErrOut" string to check whether the content in console
Error device page has been changed. But when call function
UpdateConsoleContent, we pass console name as "ConErr" by mistake.
This patch is to fix the inconsistent issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
(cherry picked from commit 983f59932d)
Some USB devices don't report data periodically through Int
Transfer. They report data only when be asked. If the TRB
is not removed from the XHCI HW, when next time HOST asks
data again, the data is reported but consumed by the previous
TRB, which results the HOST thinks data never comes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit b33b1055b0)
When "reconnect -r" is typed in shell, UsbFreeInterface() is called
to uninstall the UsbIo and DevicePath. But When a UsbIo is opened
by a driver and that driver rejects to close the UsbIo in Stop(),
the uninstall doesn't succeed.
But UsbFreeInterface () frees the DevicePath memory without check
whether the uninstall succeeds.
It leads to the DXE core database contain a DevicePath instance but
that instance's memory is freed.
Assertion happens when someone calls InstallProtocol(DevicePath)
because the InstallProtocol() checks all DevicePath instance to
find whether the same one exits in database.
We haven't seen any USB device driver which rejects to close UsbIo
in Stop(), but it's very likely.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
(cherry picked from commit b659b503fa)
https://bugzilla.tianocore.org/show_bug.cgi?id=554
Update LogoDxe module to print a DEBUG() message and exit
with an error instead of ASSERT_EFI_ERROR() if the HII
Image Package with the logo image is not present.
If a tool chain does not support generation of PE/COFF
resource sections, then this module can not produce the logo
from an HII Image Package. XCODE5 is an example of a tool
chain that does not currently support generation of PE/COFF
resource sections.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Andrew Fish <afish@apple.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 1c020add31)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=568
Use fixed data type in data structure and make the structure
be natural aligned.
Without this update, the code must assume DXE and SMM are using
same data type (same size of UINTN), but it may be not true at
some case, for example, after standalone SMM feature is enabled.
With this update, the data structure will be phase independent
and convenient for consumer to parse the data.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit f248539538)
KeyOption points to a buffer holding the content of Key####.
So its size is smaller than EFI_BOOT_MANAGER_KEY_OPTION.
Old code to assign value to KeyOption->OptionNumber modifies
the memory outside of the KeyOption buffer.
The patch fixes this bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
(cherry picked from commit 7320b8ed18)
When DynamicEx PCD is only used in PEI code, but not DXE code,
current implementation of DxePcdGetNextTokenSpace does not assign
TmpTokenSpaceBufferCount correctly, but leaves it as initial value,
then DxePcdGetNextTokenSpace may return incorrect token space guid
and status.
This patch is to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit da0df6ca8f)
For function UfsPassThruGetTargetLun(), the length of the input device
node specified by 'DevicePath' should be compared with the size of
'UFS_DEVICE_PATH' rather than the size of 'SCSI_DEVICE_PATH'.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit a8321feebb)
The RFC1323 which defines the TCP window scale option has been obsoleted by RFC7323.
This patch is to follow the RFC7323 to address the TCP window retraction problem
when a non-zero scale factor is used.
The changes has been test in high packet loss rate network by using HTTP boot and
iSCSI file read/write.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
(cherry picked from commit ca12a0c83b)
Moving Right window edge to the left on sender side without additional check
can lead to the TCP deadlock, when receiver ACKs proper segment, while sender
discards it for future ACK. To prevent this add check if usable window (or
shrink amount in this case) is bigger then receiver's window scale factor.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Andrey Tepin <atepin@kraftway.ru>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
(cherry picked from commit 207b3d2b0b)
