In smbiosview command in shell, below are the fields of SMBIOS
Type38 table which can be displayed in formatted manner.
1. Base Address
1. IPMI Specification Version.
2. NV Storage Device Address.
Base Address:
As per spec, the value in Base Address field of SMBIOS type38 table
should be right shifted by 1 if the interface type is SSIF.
IPMI Specification Version:
If the value in IPMI Specification Version field is 15H,
it should be displayed 1.5.
NV Storage Device Address:
If the value in NV Storage Device Address field is 0xFF,
it should be displayed as "No storage device is Present".
Cc: Vasudevan Sambandan <vasudevans@ami.com>
Cc: Sundaresan Selvaraj <sundaresans@ami.com>
Cc: Gayathri Thunuguntla <gayathrit@ami.com>
Signed-off-by: Prakash K <prakashk@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add a new parser for the Arm Performance Monitoring Unit Table.
The APMT table describes the properties of PMU support
implemented by components in an Arm-based system.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This reverts commit d5fd86f256 for tag202208.
This feature will be merged after stable tag 202208 is created.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3995 (https://bugzilla.tianocore.org/show_bug.cgi?id=3995)
ACPI 6.4 spec states that if the revision field in the DSDT header is less
than 2, then all integers are restricted in width to 32 bits, including in
SSDTs.
Arm Base boot requirements state that platforms must conform to ACPI 6.3
or later, and that legacy tables are not supported.
Adds a check for this field and raise warning if revision is less
than 2 on arm.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Since PeerGroups has a variable number of entries, new fields added
after PeerGroups are defined in a extended structure.
Done changes in PrintInfo.c to access those fields using
SMBIOS_TABLE_TYPE9_EXTENDED structure from SmBios.h.
Signed-off-by: Sainadh Nagolu <sainadhn@ami.com>
Cc: Vasudevan Sambandan <vasudevans@ami.com>
Cc: Sundaresan S <sundaresans@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT parser to:
- parse the Identifier field.
- parse Reserved Memory Range node.
- parse Memory Range Descriptors.
- add validations to check that the physical range base
and size of the Memory Range Descriptor is 64KB aligned.
- add validation to check that the IORT Table Revision is
not 4 as IORT Rev E.c is deprecated.
- add validation to check that the IORT RMR node revision
is not 2 as it breaks backward compatibility and was
deprecated as part of IORT Rev E.c.
- skip parsing of IORT Rev E, Rev E.a, Rev E.b, Rev E.c as
some fields were deprecated in these revisions.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Some field names in the IORT table parser were longer than the
OUTPUT_FIELD_COLUMN_WIDTH plus indentation, resulting in loss of
the output print alignment. Therefore, abbreviate the field names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3770 (https://bugzilla.tianocore.org/show_bug.cgi?id=3770)
The PPTT parser in AcpiView incorrectly dereferences a pointer to
FlagName when trying to log an error with the PPTT cache flags, which
can lead to random crashes and other errors.
Also fix some spacing in the error message to ensure the message is
printed cleanly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add a comment to clarify that in Acpiview the ItemPtr is not set until
after the FieldValidator has been called.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The patch adds entry into QueryTable.c for ProcessorUpgradeSocketLGA4677
from SMBIOS 3.5.0.
It also adds entries into QueryTable.c for ProcessorUpgradeSocketLGA4189
and ProcessorUpgradeSocketLGA1200 from SMBIOS 3.4.0.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add parser support for the new "MinTransferSize" field of the System
Locality, Latency and Bandwidth structure, introduced by the ACPI
specification version 6.4.
Also update the HMAT parser to use the newer ACPI version 6.4
definitions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhcihao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The following changes were addressed,
1. Smbios specs 3.4.0 table-51 bit5&6, these fields moved
from specific MemoryArrayLocationCXLFlexbus10AddonCard
to generic MemoryArrayLocationCXLAddonCard
to address both CXL1.0 and 2.0 CXL revisions.
2. Smbios specs 3.4.0 table-79, The memory technology name changed
from MemoryTechnologyIntelPersistentMemory
to MemoryTechnologyIntelOptanePersistentMemory.
Signed-off-by: Thotala Gopi <gopi.thotala@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The SystemEnclosureTypeTable in QueryTable.c contained a couple
of errors: value 0x10 is "Lunch Box" not "Main Server Chassis", and
the Sub Notebook value was repeated as 0x13 when that entry is for
"SubChassis". The entries in-between needed adjusted.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3045 (https://bugzilla.tianocore.org/show_bug.cgi?id=3045)
Add a new parser for the Heterogeneous Memory Attribute Table. The
parser also validates some fields for this table.
The HMAT table is used to describe the memory attributes such as memory
side cache attributes and bandwidth and latency details related to
memory proximity domains. The info in the HMAT table can be used by an
operating system for optimisation.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Introduce the ShellSortFileList() function, for sorting an
EFI_SHELL_FILE_INFO list, by FileName or by FullName.
Duplicates can be kept in the same list, or separated out to a new list.
In either case, the relative order between duplicates does not change (the
sorting is stable).
For the sorting, use OrderedCollectionLib rather than SortLib:
- The PerformQuickSort() function from the latter has quadratic worst-case
time complexity, plus it is implemented recursively (see
"MdeModulePkg/Library/UefiSortLib/UefiSortLib.c"). It can also not
return an error on memory allocation failure.
- In comparison, the Red-Black Tree instance of OrderedCollectionLib sorts
in O(n*log(n)) worst-case time, contains no recursion with the default
PcdValidateOrderedCollection=FALSE setting, and the OrderedCollectionLib
class APIs return errors appropriately.
The OrderedCollectionLib APIs do not permit duplicates natively, but by
using lists as collection entries, stable sorting of duplicates can be
achieved.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3151
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The COMP shell command compares two files byte for byte. In order to
retrieve the bytes to compare, it currently invokes
gEfiShellProtocol->ReadFile() on both files, using a single-byte buffer
every time. This is very inefficient; the underlying
EFI_FILE_PROTOCOL.Read() function may be costly.
Read both file operands in chunks of "PcdShellFileOperationSize" bytes.
Draw bytes for comparison from the internal read-ahead buffers.
Some ad-hoc measurements on my laptop, using OVMF, and the 4KB default of
"PcdShellFileOperationSize":
- When comparing two identical 1MB files that are served by EnhancedFatDxe
on top of VirtioScsiDxe, this patch brings no noticeable improvement;
the comparison completes in <1s both before and after.
- When comparing two identical 1MB files served by VirtioFsDxe, the
comparison time improves from 2 minutes 25 seconds to <1s.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3123
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Neither of the "CPU Socket Unpopulated" or "Do not reboot" messages
should contain the word "Bits".
Remove them and update the identifier for the "Do not reboot" message
to remove the word "BITS".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Bugzilla: 3047 (https://bugzilla.tianocore.org/show_bug.cgi?id=3047)
Create a new parser for the PCCT Table.
The PCCT Table is used to describe how the OSPM can
communicate with entities outside the platform. It
describes which memory spaces correspond to which
entity as well as a few of the needed information
to handle the communications.
This new PCCT parser dumps the values and names of
the table fields. It also performs some validation
on the table's fields.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3046 (https://bugzilla.tianocore.org/show_bug.cgi?id=3046)
The field validator function provides means to validate fields
in the ACPI table structures. To print complex field types a
print formatter function is provided.
The field validator was being invoked for simple data fields
for which the default print format is used. However, the field
validator function was not invoked if a print formatter function
was provided.
This problem is noticed when a Generic Address Structure (GAS)
is printed using DumpGas() and a field validator is present
to validate the GAS structure.
To fix this move the invocation of the field validator after
the field is printed such that the validation function is
called even when a print formatter function is present.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
"FirmwareVersion" was misspelled "FirwareVersion".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
