in case PeiInstallPeiMemory() is done in a callback with
EFI_PEI_PPI_DESCRIPTOR_NOTIFY_DISPATCH, and the callback is registered on
a PPI that is installed in the last PEIM.
At the case, PeiCore SwitchStack code will be not being invoked.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18305 6f19259b-4bc3-4df7-8a09-765794883524
Since the variable check service has be separated to VarCheckLib
from Variable driver, so update Variable driver to consume the
separated VarCheckLib.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18286 6f19259b-4bc3-4df7-8a09-765794883524
What to do: Implement VarCheckUefiLib NULL class library instance.
The code logic are separated from Variable driver, and it will consume VarCheckLib
to register var check handler and variable property set for UEFI defined variables.
Why to do: Share code.
Separate variable check UEFI code from Variable driver in MdeModulePkg.
We are going to separate generic software logic code from Variable Driver
to benefit other variable driver implementation. Auth services has been done
to be AuthVariableLib, now to cover variable check service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18279 6f19259b-4bc3-4df7-8a09-765794883524
What to do:
1. Add VarCheckLib LibraryClass definitions.
2. Implement VarCheckLib library instance.
The code logic are separated from Variable driver.
Why to do: Share code.
Separate variable check service from Variable driver in MdeModulePkg.
We are going to separate generic software logic code from Variable Driver
to benefit other variable driver implementation. Auth services has been done
to be AuthVariableLib, now to cover variable check service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18278 6f19259b-4bc3-4df7-8a09-765794883524
In current UiApp/Boot Maintenance manager,some pages don't support F10,
they use Commit Changes and Exit menu to save changes.Now support F10
in these pages.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18249 6f19259b-4bc3-4df7-8a09-765794883524
Ip4StartAutoConfig() will always free its default router table and interface,
which may cause IP instance missing its correct default interface. e.g. when
the policy is dhcp, and one child is configured to use default address.
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviwed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18245 6f19259b-4bc3-4df7-8a09-765794883524
In the original code, there exists some mismatches between the real
waiting time and the corresponding timeout comments. For example, the
XHC_GENERIC_TIMEOUT comment says it's 10ms timeout value, but the real
code in fact waits 10s.
So the code is refined to be consistent in code logic and comments.
Note XHC_POLL_DELAY macro also be removed and the polling interval in
XhcWaitOpRegBit() is changed from 1ms to 1us to keep same code style
with other code. It has no real functionality impact.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18235 6f19259b-4bc3-4df7-8a09-765794883524
v2:
* Update the MediaPresent detect declaring.
IP4 driver should re-initiate a DHCP if it detects that there is a network.
To fix this issue, we can implement the DHCP re-initiate policy while the media
change detected. The Ip4 driver should set a timer to signal the Ip4 to run the
DHCP configuration again(D.O.R.A). IP4 driver should free old IP address related
resource, then initiate a DHCP process to acquire new IP.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Lubo Zhang <lubo.zhang@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18232 6f19259b-4bc3-4df7-8a09-765794883524
between variable HOB and NV storage.
Variable HOB may be built by a system that supports and loads variable
default, the variables in the HOB will be flush to NV storage after
variable write search ready.
After that, if the variable's Attributes is changed by someone and
system reboots and tries to load default again, the variable Attributes
mismatch case between variable HOB and NV storage will appear.
Original code did not handle the case correctly, that may eventually
cause NV storage contains two valid same variables that will lead to
system hang if GetNextVariableName() called.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18225 6f19259b-4bc3-4df7-8a09-765794883524
When add driver option using file,input the description and then commit changes and exit,
it doesn't work.it caused by the commit 18216.When variable DriverOrderList in Variable.c
is NULL,it also need do the follow path,shouldn't return.Now change the code.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18220 6f19259b-4bc3-4df7-8a09-765794883524
DHCP policy is applied as default at boot time on all NICs in the system, which results
in all NIC ports attempting DHCP and trying to acquire IP addresses during boot.
Ip4 driver should only set dhcp as default policy, and not trigger DORA at driver binding
start(). We should start DORA until one IP child is configured to use default address.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18201 6f19259b-4bc3-4df7-8a09-765794883524
Got the build failure feedback below, this patch is to fix that.
This broke the IA32 Ovmf build for me, with GCC 5.1.1 (Fedora 22):
/home/dwmw2/git/edk2/MdeModulePkg/Core/DxeIplPeim/Ia32/DxeLoadFunc.c:377:7:
error: ‘PageTables’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
AsmWriteCr3 (PageTables);
^
/home/dwmw2/git/edk2/MdeModulePkg/Core/DxeIplPeim/Ia32/DxeLoadFunc.c:224:9:
note: ‘PageTables’ was declared here
UINTN PageTables;
^
cc1: all warnings being treated as errors
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18190 6f19259b-4bc3-4df7-8a09-765794883524
NetRandomInitSeed() function use current time to initialize the random seed,
while in some platform the time service is not accuracy that make the random
seed collision. This patch add the monotonic count to the seed to avoid this.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18185 6f19259b-4bc3-4df7-8a09-765794883524
EDKII usb stack is using a TPL_CALLBACK timer to monitor async transfer
request and signal event if it's done. As usb enumeration and usb mass
storage block i/o read/write runs on TPL_CALLBACK and TPL_NOTIFY level
respectively, It blocks usb async transfer requests, usually usb mouse
/use kb, getting time to run.
Without this change, user couldn't get usb mouse/kb state in time (will
show a little lag from UI view) when there is other usb transactions, such
as a new usb device inserted.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18169 6f19259b-4bc3-4df7-8a09-765794883524
This feature is added for UEFI spec that says
"Stack may be marked as non-executable in identity mapped page tables".
A PCD PcdSetNxForStack is added to turn on/off this feature, and it is
FALSE by default.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: "Yao, Jiewen" <Jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18166 6f19259b-4bc3-4df7-8a09-765794883524
Once the question is refreshed,the processing should happen in the callback function
of EFI_BROWSER_ACTION_RETRIEVE case,rather than EFI_BROWSER_ACTION_CHANGING in DriverSample.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18150 6f19259b-4bc3-4df7-8a09-765794883524
to right after CoreInitializeGcdServices().
Why?
Some platforms maybe report both below 4G and above 4G memory resource hob as tested,
then CoreInitializeMemoryServices() will find and add the tested above 4G memory resource hob to memory descriptor for early memory allocation services,
then if ProcessLibraryConstructorList() that has library constructor tries to allocate below 4G memory and will fail.
In fact, the following CoreInitializeGcdServices() will add all the memory resource hob to GCD map,
and add the tested below 4G memory resource hob to memory descriptor,
but it has been too late for ProcessLibraryConstructorList().
Also move below two lines as they are needed to be after
the constructor of DxeCorePerfomanceLib.
PERF_END (NULL,"PEI", NULL, 0) ;
PERF_START (NULL,"DXE", NULL, 0) ;
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18146 6f19259b-4bc3-4df7-8a09-765794883524
If the storage of the question is EFI_HII_VARSTORE_BUFFER/EFI_HII_VARSTORE_EFI_VARIABLE_BUFFER,
in SetupBrowserDxe the configuration stings contain uppercase,but HiiDataBaseDxe generates the
ConfigResp string in lowercase,they mismatch,so FindQuestionFromProgress function is broken.
Now convert the configuration string in SetupBrowserDxe to lowercase to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18143 6f19259b-4bc3-4df7-8a09-765794883524
v2 changelog:
Check CurrentPeimHandle to check the matched PeimHandle.
Add check point to ShadowPeiCore based on PCD.
v1 changelog:
PeiCore LoadImage always shadow itself and PEIM on normal boot after
the physical memory is installed. On the emulator platform, the shadow
may be not necessary. To support such usage, new PCD PcdShadowPeimOnBoot
is introduced to specify whether loads PEIM in memory by default.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18125 6f19259b-4bc3-4df7-8a09-765794883524
According to the PCI spec, when software writes all-one to BAR for size probing,
the value read back should be 0b1...10...0 after masking the BAR type bits.
But in real world, it's possible that certain device returns 0b0...01...10...0
for MEM64 BAR size probing: some bits in the high 32bit may be 0.
PciBus driver has the code to handle such case. However, it doesn't handle the
case that the high 32bit is totally 0. The patch is to handle the special case.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18114 6f19259b-4bc3-4df7-8a09-765794883524
DHCP4 service allows only one of its children to be configured
in the active state,If the DHCP4 D.O.R.A started by IP4 auto
configuration and has not been completed, the Dhcp4 state machine
will not be in the right state for the PXE to start a new round
D.O.R.A., so we need to switch it's policy to static.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18107 6f19259b-4bc3-4df7-8a09-765794883524
GLOBAL_REMOVE_IF_UNREFERENCED means __declspec(selectany) for MS tool
chain IA32/X64 build.
According to MSDN, "selectany" would tell the compiler that the declared
global data item (variable or object) is a pick-any COMDAT (a packaged
function). At link time, if multiple definitions of a COMDAT are seen,
the linker picks one and discards the rest.
So we have to remove GLOBAL_REMOVE_IF_UNREFERENCED key word from two global
variable's extern definitions of .h file as we have used this keyword in
.c file, otherwise the MS tool chain would pick the definitions in .h file
and treat it as uninitialized data to generate full-0 content for these two
global variables.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18088 6f19259b-4bc3-4df7-8a09-765794883524
When load default value or save changes will pop up message box to let user
confirm,Y means confirm and N means ignore,now add Esc key with the
same function of N key.And change the content of pop up message in .uni file,
now will display "Press 'Y' to confirm, 'N'/'ESC' to ignore."
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18076 6f19259b-4bc3-4df7-8a09-765794883524
Enhance the setupbrowserdxe to output debug message when DisplayEngineDxe is
not installed and this will be easy for user to find the reason why can not
enter Setup page.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18075 6f19259b-4bc3-4df7-8a09-765794883524
