PcdDb optimization has handled PCD DB for each SKU, not for single PCD.
So, this PCD attribute is not used any more.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit e8d2a98052)
The incorrect return status was caused by the commit of 39b0867d, which
was to resolve the token status error that does not compliance with spec
definition, but it results the protocol status not compliance with spec
definition.
This patch is to resolve above issue.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wang, Fan <fan.wang@intel.com>
(cherry picked from commit c8e342e00b)
CompatibleRangeTest() contains two bugs:
1. It doesn't reject the memory above 16MB
2. it cannot handle the case when the partial or whole range of
requested memory is already tested.
The patch fixes the two bugs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 61c1742ba1)
Because terminal doesn't support shift and toggle key state,
ReadKeyStrokeEx just sets the two states to 0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 66f2329446)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 1c06bd485e)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=650
Today's implementation converts the untested more reliable memory
from reserved GCD type to system memory GCD type.
Though it doesn't impact the return result of gBS->GetMemoryMap().
But it impacts the return result of gDS->GetMemorySpaceDescriptor().
The patch fixes the bug to convert the untested more reliable memory
from reserved GCD type to more reliable memory GCD type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 2e5fb984ed)
The updated Length value should be returned
for EFI_BUFFER_TOO_SMALL case.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit f068aa038d)
The commit places the check for MediaId at the beginning of Block IO
services:
RamDiskBlkIoReadBlocks and
RamDiskBlkIoWriteBlocks
This aligns with the Block IO protocol implementations for other
devices.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit 0feca62c7a)
V2: Just update the commit message to reference the hash value of
new performance infrastructure.
Our new performance infrastructure (edk2 trunk commit hash value:
SHA-1: 73fef64f14 ~
SHA-1: 115eae650b) can support to
dump performance date form ACPI table in OS. So we can remove
the old perf code to write performance data to OS.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 9f0d7651b3)
For a structure with a series of bit fields and used as a storage
in vfr file, and if the bit fields do not add up to the size of
the defined type.In the C code use sizeof() to get size of the
structure, the results may vary form the compiler(VS,GCC...).
But the size of the storage calculated by VfrCompiler is fixed
(calculate with alignment).To avoid the issue cased by above case,
we need to make the total width of the bit fields in the structure
aligned with the size of the defined type for these bit fields.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 6b86f6f336)
The Reset Notification protocol is added in UEFI spec to support
reset notification mechanism in the DXE phase.
This patch adds similar EDKII specific Reset Notification PPI to PEI
phase to provide the same support.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit ce2697abeb)
The patch adds more debug message in ResetSystem().
It also removes unnecessary check of mResetNotifyDepth.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit 4bf95a9f36)
Add support for platform specific reset filters and platform
specific reset handlers to ResetSystem(). A filter may modify
the reset type and reset data and call ResetSystem() with the
modified parameters. A handler performs the reset action.
The support for platform specific filters and platform specific
handlers is based on the Reset Notification feature added to the
UEFI 2.7 Specification.
Platform specific reset filters are processed first so the final
reset type and reset data can be determined. In the DXE Phase
The UEFI Reset Notifications are processed second so all UEFI
Drivers that have registered for a Reset Notification can perform
any required clean up actions. The platform specific reset
handlers are processed third. If there are no registered
platform specific reset handlers or none of them reset the
platform, then the default reset action based on the
ResetSystemLib is performed.
In the PEI Phase, filters and handlers are registered through
the following 2 PPIs that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterPpiGuid
* gEdkiiPlatformSpecificResetHandlerPpiGuid
In the DXE Phase, filters and handlers are registered through
the following 2 Protocols that are based on
EFI_RESET_NOTIFICATION_PROTOCOL.
* gEdkiiPlatformSpecificResetFilterProtocolGuid
* gEdkiiPlatformSpecificResetHandlerProtocolGuid
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
(cherry picked from commit 99a6529e1e)
# Conflicts:
# MdeModulePkg/MdeModulePkg.dec
V3:
a. Remove unused definitions
b. Get records size form the records buffer when getting size action
is triggered.
V2:
Update FirmwarePerformanceSmm to receive the address
of performance records instead of records content.
Receive buffer address of Boot performance records
which are reported by SmmCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 718a937ed9)
V4:
Update the GUID for status code in DxeCorePerformanceLib and
FirmwarePerformanceDxe.
V3:Add handling for the case when performance feature is not enabled.
V2:
Update FirmwarePerformanceDxe to receive the address
of performance records instead of records content.
1. Remove the macro EXTENSION_RECORD_SIZE, since the extension
size can be got through PcdExtFpdtBootRecordPadSize.
2. Hook EFI_SW_DXE_BS_PC_READY_TO_BOOT_EVENT to install ACPI table
3. Copy SMM record accord to the allocated size
4. Receive Boot performance table address instead of
contents which are reported DxeCorePerformanceLib.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 9e62c23017)
Current PXE driver uses zero GUID if failed to get the system GUID from smbios
table, and some OS PXE boot may fail in such case. This patch is to add a warning
message to inform user that smbios table is missed on the platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
Today's implementation only return key state when there is key.
But when user doesn't press any key, the key state cannot be
returned.
The patch changes the ReadKeyStrokeEx() to always return the
key state even there is no key pressed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
(cherry picked from commit 20ddbc133f)
The call in ProbeMediaStatusEx() to the ReadDisk() function of the
EFI_DISK_IO_PROTOCOL interface implemented in DiskIoDxe/DiskIo.c
crashed in DiskIo2ReadWriteDisk() because of the NULL value of
the destination buffer pointer.
Pass the address of a buffer in the stack instead of a NULL
pointer.
The similar fix was applied to ProbeMediaStatus in commit
df473cc1fc
* MdeModulePkg/PartitionDxe: Fix media probe
Somehow ProbeMediaStatusEx() wasn't changed together.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Tested-by: Jian J Wang <jian.j.wang@intel.com>
(cherry picked from commit 68599525d8)
Section data alignment should be made in the build generation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit bc6a7a27ce)
If PcdDxeNxMemoryProtectionPolicy is set to enable protection for memory
of EfiReservedMemoryType, the BIOS will hang at a page fault exception
triggered by BootScriptExecutorDxe.
The root cause is that this driver will allocate memory of
EfiReservedMemoryType and relocate itself into this new memory. Since
EfiReservedMemoryType of memory is marked non-executable, re-start this
driver after relocation will cause exception. The fix is removing the NX
attribute after memory allocation.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 6a3094c996)
XCODE5 doesn't support absolute addressing in the assembly code.
This change uses lea instruction to get the address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 62382925c9)
* Since wireless network can switch at very short time, the time interval
of reconfig event checking is too long for this case. To achieve better
performance and scalability, separate this task from Ip4 tick timer.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
(cherry picked from commit 018432f0ce)
* When build a DHCP message in function DhcpSendMessage() or DhcpRetransmit(),
a new NET_BUF is created by the library of NetbufFromExt, but it's not freed
after it is sent out. This patch is to fix this memory leak issue.
V2:
* Since packet has already been referred by DhcpSb->LastPacket, and will be
freed when sending another packet or clean up, there is no need to add an
extra free function in NetbufFromExt.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
(cherry picked from commit 479a3b6053)
v2:
* Refine the commit log.
There are two place to close the ISCSI ExitBootServiceEvent:
#1.IScsiOnExitBootService(), which is the callback function of
ExitBootServiceEvent.
#2.IScsiCleanDriverData(), which will be invoked by ISCSI driver
binding stop().
So, the ExitBootServiceEvent will be closed and freed when exit boot
server is triggered. But it may be closed and freed again in ISCSI driver
binding stop(), which will result in the issue recorded at
https://bugzilla.tianocore.org/show_bug.cgi?id=742.
This patch is to resolve the issue.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
(cherry picked from commit d32159853d)
* In function Mtftp4WrqSendBlock(), when packet is not needed, function
returns EFI_ABORTED but not freed the packet buffer. It results some
memory leak and this patch is to fix this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
(cherry picked from commit 36c19ee6c7)
* This function sets returned status as token status and signal token
when error occurs, and it results token status not compliance with
spec definition. This patch fixed this issue.
* This function restore Tpl twice when Mtftp4WrqStart() returns an
error, this patch fixed this issue.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
(cherry picked from commit 39b0867d83)
The Dhcp4.TransmitReceive() API should be able to use at any time according
to UEFI spec. While in classless addressing network, the netmask must be
explicitly provided together with the station address.
But if the DHCP instance haven't be configured with a valid netmask, we need
compute it according to the classful addressing rule. In such case, if the
user configures with class E IP address, ASSERT will happen, we need to handle
this case and return error status code.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
(cherry picked from commit 0ba795d21a)
The UDF feature is not ready for production. Remove it from the UDK2018
branch.
This commit removes the UDF/ECMA-167 file system related code changes
done within:
MdeModulePkg/Universal/Disk/PartitionDxe/
MdeModulePkg/Universal/Disk/UdfDxe/
MdeModulePkg/MdeModulePkg.dsc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=546
BaseTools will generate the optimized PCD database to save the image size
at build time for multiple SKUs. The optimized PCD database layout will be like
below, the PCD database will be composed of the full default SKU data
(PCD_DATABASE_INIT) and the non-default SKU delta data(PCD_DATABASE_SKU_DELTA).
PCD driver will build HOB to store the full default SKU data, and patch HOB
data based on non-default SKU delta data for the SKU set by SetSku(),
it can save memory resource at boot time.
//
// PCD database layout:
// +---------------------------------+
// | PCD_DATABASE_INIT (DEFAULT SKU) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU A) |
// +---------------------------------+
// | PCD_DATABASE_SKU_DELTA (SKU B) |
// +---------------------------------+
// | ...... |
// +---------------------------------+
//
BaseTools, PCD database and driver updates are needed for this proposal.
For single SKU (default) case, this proposal is expected to have no impact.
For multi-SKU case, PCD database format will be changed.
So, PcdDataBase Version is also updated from 6 to 7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
PEI may report the normal format variable storage HOB for the default
EFI variable. VariableDxe needs to support it and set them into NV variable
region.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This patch fixes a bug in Ip4ConfigProtocol, that new created IP interface is
not freed if Open ARP protocol failed.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Instance->Dhcp4Event is not necessary to be created in Ip4Config2InitInstance.
Because it will created in Ip4StartAutoConfig() later.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Since new Api NetLibDetectMediaWaitTimeout was involved to support connecting
state handling, and it is forward compatible. So apply this Api in MdeModulePkg.
V2:
*Define time period in a macro instead of hard code.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: fanwang2 <fan.wang@intel.com>
This patch updates the IP4 driver to use error status code instead of ASSERT
if failed to allocate memory buffer.
Reviewed-by: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
