VerifyBlob() has been added recently to QemuKernelLoaderFsDxe, also
QemuKernelLoaderFsDxe has been added recently to OvmfXen but without an
implementation of VerifyBlob().
Fix this by adding the same runes that have been added to
OvmfPkgX64.dsc.
Fixes: 9f3eda177a ("OvmfPkg/OvmfXen: add QemuKernelLoaderFsDxe")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Fix a typo of "memory" in a debug message in RamDiskProtocol.c.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
UefiPayloadEntry's AllocatePool() applies the "sizeof" operator to
HOB index rather than the HOB header structure. This yields 4 Bytes
compared to the 8 Bytes the structure header requires. Fix the call
to allocate the required space instead.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Marvin H?user <mhaeuser@posteo.de>
V1: Add quotes when using $(ARCH) in .dsc and .fdf file.
The quotes are added due to the way by which Core ci parse the .dsc file.
Add UINTN in Hob.c to fix cast from pointer to integer of different size error.
V2: Delete lines which reference ShellBinPkg.The pkg doesn't exist in edk2.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
There are several functions in OvmfPkg/Library using
QemuFwCfgS3Enabled() to detect the S3 support status. However, in
MdeModulePkg, PcdAcpiS3Enable is used to check S3 support. Since
InitializeXenPlatform() didn't set PcdAcpiS3Enable as
InitializePlatform() did, this made the inconsistency between
drivers/functions.
For example, S3SaveStateDxe checked PcdAcpiS3Enable and skipped
S3BootScript because the default value is FALSE. On the other hand,
PlatformBootManagerBeforeConsole() from OvmfPkg/Library called
QemuFwCfgS3Enabled() and found it returned TRUE, so it invoked
SaveS3BootScript(). However, S3SaveStateDxe skipped S3BootScript, so
SaveS3BootScript() asserted due to EFI_NOT_FOUND.
This issue mainly affects "HVM Direct Kernel Boot". When used,
"fw_cfg" is enabled in QEMU and QemuFwCfgS3Enabled() returns true in
that case.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
This commit adds code which check BootDiscoveryPolicy variable and
calls Boot Policy Manager Protocol to connect device specified by
the variable. To enable that mechanism for platform
EfiMdeModulePkgTokenSpaceGuid.PcdBootDiscoveryPolicy PCD must be
added to DSC file and BootDiscoveryPolicyUiLib should be added to
UiApp libraries.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This variable is needed to track the change to
BootDiscoveryPolicy variable. Boot options should
be refreshed only if BootDiscoveryPolicy has been
changed.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Now with everything in place for virtio 1.0 devices we can let
VirtioMmioInit() return SUCCESS.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Use QueueNumMax as QueueNum default for drivers which do not
explicitly call VIRTIO_DEVICE_PROTOCOL->SetQueueSize().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Virtio 1.0 allows a more flexible virtio ring layout, so we have to set
addresses for descriptors avail flags and use flags separately. We
continue to use a ring layout compatible with virtio 0.9.5 though, so no
other changes are needed to setup the virtio queues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add #defines for the Version field. Read and store the version,
log the version found as info message.
Continue to return UNSUPPORTED for now, we need some more patches
to complete virtio 1.0 support first.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add defines for the config space offsets for virtio 1.0 mmio transport.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Currently, at ExitBootServices() time, the GICv3 driver signals
End-Of-Interrupt (EOI) on all interrupt lines that are supported by the
interrupt controller. This appears to have been carried over from the
GICv2 version, but has been turned into something that violates the GIC
spec, and may trigger SError exceptions on some implementations.
Marc puts it as follows:
The GIC interrupt state machine is pretty strict. An interrupt can
only be deactivated (with or without prior priority drop) if it has
been acknowledged first. In GIC speak, this means that only the
following sequences are valid:
With EOImode==0:
x = ICC_IAR{0,1}_EL1;
ICC_EOIR{0,1}_EL1 = x;
With EOImode==1:
x = ICC_IAR{0,1}_EL1;
ICC_EOIR{0,1}_EL1 = x;
ICC_DIR_EL1 = x;
Any write to ICC_EOIR{0,1}_EL1 that isn't the direct consequence of
the same value being read from ICC_IAR{0,1}_EL1, and with the correct
nesting, breaks the state machine and leads to unpredictable results
that affects *all* interrupts in the system (most likely, the priority
system is dead). See Figure 4-3 ("Interrupt handling state machine")
in Arm IHI 0069F for a description of the acceptable transitions.
Additionally, on implementations that have ICC_CTLR_EL1.SEIS==1, a
SError may be generated to signal the error. See the various
<quote>
IMPLEMENTATION_DEFINED "SError ....";
</quote>
that are all over the pseudocode contained in the same architecture
spec. Needless to say, this is pretty final for any SW that would do
silly things on such implementations (which do exist).
Given that in our implementation, every signalled interrupt is acked,
handled and EOId in sequence, there is no reason to EOI all interrupts
at ExitBootServices() time in the first place, so let's just drop this
code. This fixes an issue reported by Marc where an SError is triggered
by this code, bringing down the system.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Map->Operation is used to select whether a DMA region that
is being bounced has the source buffer copied to it. Except
Map->Operation isn't yet set, so the behavior is somewhat
random. Instead use the passed in Operation parameter.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Adding two unit test case for UefiSortLib. One is a test on
sorting an array of UINT32 by using PerformQuickSort, another
is a test on comparing the same buffer by using StringCompare.
Add 'main' function name to ECC exception list to avoid ECC
error.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change allows to build StandaloneMmPkg components for 32bit Arm
StandaloneMm firmware.
This change mainly moves AArch64/ source files to Arm/ side directory
for several components: StandaloneMmCpu, StandaloneMmCoreEntryPoint
and StandaloneMmMemLib. The source file is built for both 32b and 64b
Arm targets.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Use intermediate (UINTN) cast when casting int from/to pointer. This
is needed as UINT64 values cast from/to 32bit pointer for 32bit
architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Change GenFv for Arm architecture to generate a specific jump
instruction as image entry instruction, when the target entry label
is assembled with Thumb instruction set. This is possible since
SecCoreEntryAddress value fetched from the PE32 has its LSBit set when
the entry instruction executes in Thumb mode.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Changes in ArmPkg to prepare building StandaloneMm firmware for
32bit Arm architectures.
Adds ArmmmuStandaloneMmLib library to the list of the standard
components build for ArmPkg on when ARM architectures.
Changes path of source file AArch64/ArmMmuStandaloneMmLib.c
and compile it for both 32bit and 64bit architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Defines ARM_SVC_ID_FFA_* and ARM_SVC_ID_SP_* identifiers for 32bit
function IDs as per SMCCC specification. Defines also generic ARM
SVC identifier macros to wrap 32bit or 64bit identifiers upon target
built architecture.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Public the header file, move RefishCrtLib.h from PrivateInclude/
to Include/.
RefishCrtLib.lib will be public later. (Moved out from PrivateLibrary/)
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
