"FirmwareVersion" was misspelled "FirwareVersion".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In SmBios.h, the SMBIOS_TABLE_TYPE4 field "ProcessorManufacture"
should be "ProcessorManufacturer".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
https://bugzilla.tianocore.org/show_bug.cgi?id=3074
* Fix offset of LinkLayerControlAndStatus in the
CXL_1_1_LINK_CAPABILITY_STRUCTURE structure
* Fix offset of LinkLayerAckTimerControl in the
CXL_1_1_LINK_CAPABILITY_STRUCTURE structure
* Fix offset of LinkLayerDefeature in
the CXL_1_1_LINK_CAPABILITY_STRUCTURE structure
* Add CXL_11_SIZE_ASSERT() macro to verify the size of
a register layout structure at compile time and use
it to verify the sizes of the CXL 1.1 register structures.
* Add CXL_11_OFFSET_ASSERT() macro to verify the offset of
fields in a register layout structure at compiler time and
use it to verify the offset of fields in CXL 1.1
register structures.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ashraf Javeed <ashraf.javeed@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ashraf Javeed <ashraf.javeed@intel.com>
The Raspberry Pi platform with Secure Boot enabled currently fails to build
with error:
Module type [DXE_RUNTIME_DRIVER] is not supported by library instance
[/home/appveyor/projects/rpi4/edk2/MdePkg/Library/DxeRngLib/DxeRngLib.inf]
Add the missing class to fix this issue.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The ProcessorCharacteristics is a UINT16 field, so the
PROCESSOR_CHARACTERISTIC_FLAGS bitfield should be UINT16 too.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
SMBIOS 3.4.0 defines bit 9 of the Type 4 table Processor Characteristics
field to be the ARM64 SoC ID support. Add it to the
PROCESSOR_CHARACTERISTIC_FLAGS struct bitfield.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The current SSE2 implementation of the ZeroMem(), SetMem(),
SetMem16(), SetMem32 and SetMem64 functions is writing 16 bytes per 16
bytes. It hurts the performances so bad that this is even slower than
a simple 'rep stos' (4% slower) in regular DRAM.
To take full advantages of the 'movntdq' instruction it is better to
"queue" a total of 64 bytes in the write combining buffers. This
patch implement such a change. Below is a table where I measured
(with 'rdtsc') the time to write an entire 100MB RAM buffer. These
functions operate almost two times faster.
| Function | Arch | Untouched | 64 bytes | Result |
|----------+------+-----------+----------+--------|
| ZeroMem | Ia32 | 17765947 | 9136062 | 1.945x |
| ZeroMem | X64 | 17525170 | 9233391 | 1.898x |
| SetMem | Ia32 | 17522291 | 9137272 | 1.918x |
| SetMem | X64 | 17949261 | 9176978 | 1.956x |
| SetMem16 | Ia32 | 18219673 | 9372062 | 1.944x |
| SetMem16 | X64 | 17523331 | 9275184 | 1.889x |
| SetMem32 | Ia32 | 18495036 | 9273053 | 1.994x |
| SetMem32 | X64 | 17368864 | 9285885 | 1.870x |
| SetMem64 | Ia32 | 18564473 | 9241362 | 2.009x |
| SetMem64 | X64 | 17506951 | 9280148 | 1.886x |
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Correct the memory offsets used in REG_ONE/REG_PAIR macros to
synchronize them with definition of the BASE_LIBRARY_JUMP_BUFFER
structure on AArch64.
The REG_ONE macro declares only a single 64-bit register be
read/written; however, the subsequent offset is 16 bytes larger,
creating an unused memory gap in the middle of the structure and
causing SetJump/LongJump functions to read/write 8 bytes of memory
past the end of the jump buffer struct.
Signed-off-by: Jan Bobek <jbobek@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
If the size of the supplied buffer in FileHandleReadLine(), module
UefiFileHandleLib.c, was not 0, but was not enough to fit in
the line, the size is increased, and then the Buffer of the new
size is zeroed. This size is always larger than the supplied buffer size,
causing supplied buffer overrun. Fix the issue by using the
supplied buffer size in ZeroMem().
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Message-Id: <20200702023113.10517-1-vladimir.olovyannikov@broadcom.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
[lersek@redhat.com: remove stray space character from subject line]
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
VMGEXIT is a new instruction used for Hypervisor/Guest communication when
running as an SEV-ES guest. A VMGEXIT will cause an automatic exit (AE)
to occur, resulting in a #VMEXIT with an exit code value of 0x403.
Since SEV-ES is only supported in X64, provide the necessary X64 support
to execute the VMGEXIT instruction, which is coded as "rep vmmcall". For
IA32, since "vmmcall" is not supported in NASM 32-bit mode and VMGEXIT
should never be called, provide a stub implementation that is identical
to CpuBreakpoint().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
While RISC-V hart is trapped into S-Mode, the S-Mode interrupt
CSR (SIE) is disabled by RISC-V hart. However the (SIE) is enabled
again by RestoreTPL, this causes the second S-Mode trap is triggered
by the machine mode (M-Mode)timer interrupt redirection. The SRET
instruction clear Supervisor Previous Privilege (SPP) to zero
(User mode) in the second S-Mode interrupt according to the RISC-V
spec. Above brings hart to the user mode (U-Mode) when execute
SRET in the nested S-Mode interrupt handler because SPP is set to
User Mode in the second interrupt. Afterward, system runs in U-Mode
and any accesses to S-Mode CSR causes the invalid instruction exception.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1004
Being a compiler builtin, the type of __builtin_return_address is
already known to the compiler so no prototype is needed. Clang also
errors out when redeclaring certain builtins like this[1], though
currently only for ones with custom type checking. At the moment,
__builtin_return_address does not use custom type checking and so does
not trigger this error, however, the CHERI fork of LLVM, which will form
the basis of the toolchain for Arm's experimental Morello platform, does
use custom type checking for it, and so gives an error. Thus, simply
delete the unnecessary line.
[1] llvm/llvm-project@41af971375
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Update INF file to use a [Pcd] section instead of a
[FixedPcd] section. [FixedPcd] should only be used in an
INF file if the source code looks up the PCD value using
the PcdLib FixedPcdGetxx() services. Using [FixedPcd]
forces a platform to configure the PCD to type FixedAtBuild.
In this case, PcdDebugPropertyMask supports PCD types
FixedAtBuild and PatchableInModule. Without this change
any platform that wants to use PcdDebugPropertyMask as
type PatchableInModule breaks the build.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2801
Add the UT_EXPECT_ASSERT_FAILURE(FunctionCall, Status) macro
to the UnitTestLib that can be used to check if a function
under test triggers an ASSERT() condition. If an ASSERT()
condition is triggered, then the macro returns. If the
ASSERT() condition is not triggered, then the current unit
test fails with a status of UNIT_TEST_ERROR_TEST_FAILED.
If ASSERT()s are disabled, then this check for ASSERT()
behavior is not possible, and the check is skipped.
The global variable gUnitTestExpectAssertFailureJumpBuffer
is added to the UnitTestLib to save/restore context when
the UT_EXPECT_ASSERT_FAILURE(FunctionCall, Status) macro
is used. The UT_EXPECT_ASSERT_FAILURE() macro uses the
SetJump() service with this global variable. The UnitTestLib
service UnitTestDebugAssert() uses the LongJump() service
with this global to restore context if an ASSERT() is
triggered by the code under test.
Add UnitTestExpectAssertFailure() to the UnitTestLib class.
The UnitTestExpectAssertFailure() is called from the new
UT_EXPECT_ASSERT_FAILURE() macro after the status of this
macro check is known.
Add UnitTestDebugAssert() to the UnitTestLib class. The
UnitTestDebugAssert() service is the same as the DebugLib
DebugAssert() service and is invoked from the DebugLib
_ASSERT() macro if unit testing is enabled. This allows the
Unit Test Framework to know when code under test triggers an
ASSERT() condition.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2800
Add a new version of BaseLib that is safe for use from host based
unit test applications. Host based unit test applications may need
to provide implementations of some BaseLib functions that provide
simple emulation to exercise the code under test. The structure
UNIT_TEST_HOST_BASE_LIB is filled in with services that provide
default emulation for BaseLib APIs that would normally generate
exceptions in a host based unit test application. This structure
allows an individual unit test to replace the default emulation of
a BaseLib service with an alternate version that is required by a
specific unit test. A global variable of type UNIT_TEST_HOST_BASE_LIB
is provided through the new UnitTestHostBaseLib library class.
Normally cmocka would be used to mock services the code under
test calls. However, the BaseLib is used by the Unit Test
Framework itself, so using a mocked interface is not possible.
The use of a structure to provide hooks for unit test is not
expected to be a common feature. It should only be required
for libraries that are used by both the Unit Test Framework and
the code under test where the code under test requires a
different behavior than the Unit Test Framework.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
