Simplify the ConvertMemoryPageAttributes API to convert paging
attribute by CpuPageTableLib. In the new API, it calls
PageTableMap() to update the page attributes of a memory range.
With the PageTableMap() API in CpuPageTableLib, we can remove
the complicated page table manipulating code.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
In UnsetGuardPage(), before SmmReadyToLock, remove NX and RO
memory attribute protection for guarded page since
EfiConventionalMemory in SMRAM is RW and executable before
SmmReadyToLock. If UnsetGuardPage() happens after SmmReadyToLock,
then apply EFI_MEMORY_XP to the guarded page to make sure
EfiConventionalMemory in SMRAM is NX since EfiConventionalMemory
in SMRAM is marked as NX in PiSmmCpuDxe driver when SmmReadyToLock.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Remove code that sets AddressEncMask for non-leaf entries when
modifing smm page table by MemEncryptSevLib. In FvbServicesSmm
driver, it calls MemEncryptSevClearMmioPageEncMask to clear
AddressEncMask bit in page table for a specific range. In AMD
SEV feature, this AddressEncMask bit in page table is used to
indicate if the memory is guest private memory or shared memory.
But all memory accessed by the hardware page table walker is
treated as encrypted, regardless of whether the encryption bit
is present. So remove the code to set the EncMask bit for smm
non-leaf entries doesn't impact AMD SEV feature.
The reason encryption mask should not be set for non-leaf
entries is because CpuPageTableLib doesn't consume encryption
mask PCD. In PiSmmCpuDxeSmm module, it will use CpuPageTableLib
to modify smm page table in next patch. The encryption mask is
overlapped with the PageTableBaseAddress field of non-leaf page
table entries. If the encryption mask is set for smm non-leaf
page table entries, issue happens when CpuPageTableLib code
use the non-leaf entry PageTableBaseAddress field with the
encryption mask set to find the next level page table.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The UEFI driver model invokes the supported() method on every driver
every time a connection attempt is made on any handle, and so doing an
unconditional DEBUG() print inside this method produced a lot of noise.
So let's drop this DEBUG() call from the VirtioSerial driver's
Supported() method.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The OP-TEE secure OS exposes a non-secure memory region for
communication between the secure OS itself and any clients in the
non-secure firmware. This memory is writable by non-secure and is not
used for code only data, and so it should be mapped non-executable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Now that we have a sane API to set and clear memory permissions that
works the same on ARM and AArch64, we no longer have a need for the
individual set/clear no-access/read-only/no-exec helpers so let's drop
them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
StandaloneMm has its own version of the ArmMmuLib library class, but
includes the ArmMmuLib header. This happens to work because the
prototypes that are referenced are the same, but this will no longer be
the case after a future patch. So correct the #includes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Because it's simpler for a platform to include the ResetVector source
and having pre-built binaries add burdens of updating the pre-built
binaries. This patch removes the pre-built binaries and the script
that buids the pre-built binaries.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
ResetVector assembly implementation puts "ALIGN 16" in the end
to guarantee the final executable file size is multiple of 16 bytes.
Because the module uses a special GUID which guarantees it's put in
the very end of a FV, which should be also the end of the FD.
All of these (file size is multiple of 16B, and the module is put at
end of FV, FV is put at end of FD) guarantee the "JMP xxx" instruction
is at FFFF_FFF0h.
This patch updates INF file and ReadMe.txt to add guidance of FDF ffs
rule for the ResetVector.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Now that ArmSetMemoryAttributes() permits a mask to be provided, we can
simplify the implementation the UEFI memory attribute protocol
substantially, and just pass on the requested mask to be set or cleared
directly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Now that we have a generic method to manage memory permissions using a
PPI, we can switch to the generic version of the DXE handoff code in
DxeIpl, and drop the ARM specific version.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Implement the newly defined PPI that permits the PEI core and DXE IPL to
manage memory permissions on ranges of DRAM, for doing things like
mapping the stack non-executable, or granting executable permissions to
shadowed PEIMs.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Currently, ArmSetMemoryAttributes () takes a combination of
EFI_MEMORY_xx constants describing the memory type and permission
attributes that should be set on a region of memory. In cases where the
memory type is omitted, we assume that the memory permissions being set
are final, and that existing memory permissions can be discarded.
This is problematic, because we aim to map memory non-executable
(EFI_MEMORY_XP) by default, and only relax this requirement for code
regions that are mapped read-only (EFI_MEMORY_RO). Currently, setting
one permission clears the other, and so code managing these permissions
has to be aware of the existing permissions in order to be able to
preserve them, and this is not always tractable (e.g., the UEFI memory
attribute protocol implements an abstraction that promises to preserve
memory permissions that it is not operating on explicitly).
So let's add an AttributeMask parameter to ArmSetMemoryAttributes(),
which is permitted to be non-zero if no memory type is being provided,
in which case only memory permission attributes covered in the mask will
be affected by the update.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
If the associated PCD is set to TRUE, use the memory attribute PPI to
remap the stack non-executable. This provides a generic method for doing
so, which will be used by ARM and AArch64 as well once they move to the
generic DxeIpl handoff implementation.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The Risc-V and LoongArch specific versions of the DXE core handoff code
in DxeIpl are essentially copies of the EBC version (modulo the
copyright in the header and some debug prints in the code).
In preparation for introducing a generic PPI based method to implement
the non-executable stack, let's merge these versions, so we only need to
add this logic once.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Define a PPI interface that may be used by the PEI core or other PEIMs
to manage permissions on memory ranges. This is primarily intended for
restricting permissions to what is actually needed for correct execution
by the code in question, and for limiting the use of memory mappings
that are both writable and executable at the same time.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bhyve will gain support for TPM emulation in the near future. Therefore,
prepare OVMF by copying all TPM driver used by qemu's OVMF DSC into the
bhyve OVMF DSC.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This makes the InstallQemuFwcfgTables function reusable by bhyve.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
This is required to move InstallQemuFwCfgTables into AcpiPlatformLib.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
Bhyve supports providing ACPI tables by FwCfg. Therefore,
InstallQemuFwCfgTables should be moved to AcpiPlatformLib to reuse the
code. As first step, move PciEncoding into AcpiPlatformLib.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Acked-by: Peter Grehan <grehan@freebsd.org>
The definition and declaration of GetAcpiRsdpFromMemory doesn't match.
We don't get a compile error yet because UINTN is the same as UINT64 on
64bit machines. As the function works on memory addresses, UINTN is the
correct type of the input parameters.
Signed-off-by: Corvin Köhne <corvink@FreeBSD.org>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Currently, RiscVVirtQemu supports unified code and variable store
mainly because only one pflash devices was available in qemu for
EDK2. However, this doesn't allow to map the code part as read-only.
With recent qemu enhancements, it is now possible for EDK2 to make
use of both pflash devices in RISC-V virt machine. So, add support
to create code and vars images separately. This also allows easy
firmware code updates without losing the variable store.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Andrei Warkentin <andrei.warkentin@intel.com>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This commit is code optimization to InternalAllocateAlignedPages of
SmmMemoryAllocationLib which can reduce free memory fragments. Also
it can reduce one pre-allocation page.
Let's take a simple example:
The expected pages size is 8KB, Alignment value is 8KB.
In original InternalAllocateAlignedPages(), the first step is to
allocate 4 pages and then find the first 8KB-aligned address in
allocated 4 pages. If the upper limit address of allocated 4 pages
is already 8KB aligned, then the allocated 4 pages contains two
8KB-aligned 8KB ranges. The lower 2 pages will be selected and
removed from free pages. Then the higher 2 pages will be free.
Since the whole memory allocation is from high address to low
address, then the higher 2 pages cann't be merged with other free
pages, causing the free memory fragments.
However, when only allocate 3(2+2-1) pages, we can avoid the free
memory fragments in specific case. Also 3 pages must contain a
8KB-aligned 8KB range, which meets the requirement. If the upper
limit address of allocated 3 pages is 8KB-aligned, then the higher
2 pages range of allocated 3 pages is 8KB-aligned and will be
selected and removed from free pages. The remaining lower one page
of allocated 3 pages will be free and merged with left lower free
memory. This can reduce free memory fragments in smm.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
When a platform has lots of CPU cores/threads, perf-logging on every
AP produces lots of records. When this multiplies with number of SMIs
during post, the records are even more.
So, this patch adds a new PCD PcdSmmApPerfLogEnable (default TRUE)
to allow platform to turn off perf-logging on APs.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
MP procedures are those procedures that run in every CPU thread.
The EDKII perf infra is not MP safe so it doesn't support to be called
from those MP procedures.
The patch adds SMM MP perf-logging support in SmmMpPerf.c.
The following procedures are perf-logged:
* SmmInitHandler
* SmmCpuFeaturesRendezvousEntry
* PlatformValidSmi
* SmmCpuFeaturesRendezvousExit
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
