Add STD_ERROR flag to all output consoles that the Nt32
platform supports so all messages sent to the standard
error console device(s) are visible by default.
The Boot Maintenance Manager can be used to manually disable
standard error output to specific console devices.
UEFI Applications and UEFI Drivers are recommended to be
built with DEBUG() and ASSERT() messages sent to the standard
error device using MdePkg/Library/UefiDebugLibStdErr. Prior
to this change, a user would have to use the Boot Maintenance
Manager to configure a standard error console device to make
these messages visible.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Tested-by: Sunny Wang <sunnywang@hpe.com>
Currently the PcdMaxVariableSize is controlled by the below condition
check:
!if $(SECURE_BOOT_ENABLE) == TRUE || $(TLS_ENABLE) == TRUE
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
!endif
But for other case, PcdMaxVariableSize is also required with the value
of 0x2000 (e,g. NetworkPkg/IScsiDxe), so remove the condition of
PcdMaxVariableSize for NT32 platform.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
According to the PI spec, Volume 3,
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.EraseBlocks():
> The variable argument list is a list of tuples. Each tuple describes a
> range of LBAs to erase and consists of the following:
> * An EFI_LBA that indicates the starting LBA
> * A UINTN that indicates the number of blocks to erase
(NB, in edk2, EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL is a typedef to
EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.)
In this driver, the NumOfLba local variable is defined with type UINTN,
but the TYPE argument passed to VA_ARG() is UINT32. Fix the mismatch.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reported-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Currently all the network interfaces share the one recycled transmit buffer
array, which is used to store the recycled buffer address. However, those
recycled buffers are allocated by the different MNP interface if the multiple
network interfaces existed. Then, SNP GetStatus may return one recycled transmit
buffer address to the another MNP interface, which may result in the MNP driver
hang after 'reconnect -r' operation.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
It is the follow up of commits 51f0ceb..9e32e97 to replace
AsciiValueToString/UnicodeValueToString with
AsciiValueToStringS/UnicodeValueToStringS.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ease security analysis by excluding libssl functionality from the
OpensslLib instance we use with TLS_ENABLE=FALSE.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Tomas Hoger <thoger@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Add StatusCode Handler into APRIORI DXE so that they can run early, then
more DEBUG message can print.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
When running Nt32Pkg, SMBIOS Type 3 was missing Height, NumberofPowerCords, and SKU Number.
Also, ContainedElements was not being handled correctly.
Fixed code to add example data, correct some variable names (Assert -> Asset), and properly handle setting the Type 3 values.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
When running Nt32Pkg, SMBIOS Type 2 had the wrong Length.
Fixed the code to use the correct structure in sizeof, and properly account for ContainedObjectHandles.
Also updated variable names with Assert -> Asset
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chris Phillips <chrisp@hpe.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=331
If Nt32 is built using UEFI Shell from the ShellPkg sources,
an ASSERT() is generated when a single '\' character is
entered at the shell prompt.
The WinNtSimpleFileSystemDxe module GetNextFileNameToken()
function breaks a file path up into tokens, but it does not
handle the case where a FileName ends in a '\' character.
It returns an empty string instead of NULL. The fix is
to set *FileName to NULL if the remaining file path is an
empty string.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
In V2:
Add the specific LIB path in IA32 LINK path.
Update SecMain.inf to support VS2015x86 X64 Mode Build.
After this change, X64 Native Tools Command Prompt is not
required to be trig. NT32 IA32 and X64 can be built in the same
environment. It simplifies NT32 X64 build. New build command:
edksetup.bat --nt32
build -p Nt32Pkg\Nt32Pkg.dsc -a X64 # for 64
build -p Nt32Pkg\Nt32Pkg.dsc -a IA32 # for 32
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Chan <chanuei@sina.com>
Tested-by: Liming Gao <liming.gao@intel.com>
TLS feature highly depends on the OpenSSL building. To avoid
the default Nt32 platform build failure, we should change the
default value of TLS_ENABLE to FALSE.
The notes are also provided for Secure Boot and TLS features.
Cc: Ni Ruiyu <ruiyu.ni@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Long Qin <qin.long@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
In GetInfo interface, current code copy real file name buffer
with full path file length. It should use real file name
length. This patch fix this error.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
From PI spec vol2:
Prior to invoking any UEFI drivers, applications, or connecting consoles,
the platform should signal the event EFI_END_OF_DXE_EVENT_GUID
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Prototype of BootLogoEnableLogo will change in following patches, so
do not call BootLogoEnableLogo to avoid build failure.
Contributed-under: TianoCore Contribution Agreement 1.0
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Enable BootManagerMenuApp application for Nt32 platform.
Also enable F7 hotkey to select this boot option.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
After add LoadFileOnFv2, PlatformBootManagerLib doesn't need to find Shell
application from FV.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Now that FatPkg is open source (and therefore can be included in the
EDK II tree) we build and use it directly.
Note: Not build tested
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@Intel.com>
Switch the DebugLibReportStatusCode from IntelFrameworkPkg to MdeModulePkg.
The functionality and the code between them are almost the same.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Use new created libraries(Boot Manager,Device Manager,Boot Maintenance
Manager) in UiApp.So remove and refine relative code in UiApp.And update
the Nt32Pkg.dsc and MdeModulePkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18924 6f19259b-4bc3-4df7-8a09-765794883524
