This is the initial patch to make it boot to early DXE
phase without display (only debug message).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Andrew Fish <afish@apple.com>
VS compiler complains converting UINTN to UINT16 causes data lost.
Add typecast to fix the build failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Andrdw Fish <afish@apple.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
Today's restriction of VGA device is to have only one VGA device
enabled per PCI segment. It's not correct because several segments
may share one IO / MMIO address space.
We should restrict to have one VGA per Host Bridge because each
Host Bridge has its only IO / MMIO address space.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1109
The patch doesn't change any behavior of this function.
It just renames the function to LocateVgaDevice() and renames
some parameters and local variables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Since hotkey 'f' is used to start AndroidFastbootApp. If user
press 'f' key too long, it may be recognized pressing 'f' key
multiple times. Then AndroidFastbootApp exists since it delcares
any key press could make it exit.
So only use ENTER or SPACE key to exit AndroidFastbootApp.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The redundant functions which are never called have been removed.
They are AtaNonDataCommandInExt,IDEBusDriverConfigurationSetOptions,
GetResponse,IDEBusDriverConfigurationOptionsValid and
IDEBusDriverConfigurationForceDefaults.
https://bugzilla.tianocore.org/show_bug.cgi?id=1063
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
V2: Add --target-name to specify the file name to create
Because Ecc.py was renamed to EccMain.py
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 81502cee20 ("BaseTools/Source/C: take EXTRA_LDFLAGS from the
caller", 2018-08-16), I missed that "VfrCompile/GNUmakefile" does not use
BUILD_LFLAGS in the APPLICATION linking rule, unlike "app.makefile" does.
Instead, "VfrCompile/GNUmakefile" uses the (undefined) LFLAGS macro.
Therefore commit 81502cee20 did not cover the linking step of
VfrCompile.
Thankfully, the structure of the linking rules is the same, between
"app.makefile" and "VfrCompile/GNUmakefile". Rename the undefined LFLAGS
macro in "VfrCompile/GNUmakefile" to VFR_LFLAGS (for consistency with
VFR_CXXFLAGS), and set it to EXTRA_LDFLAGS.
As a result, we have:
| compilation | linking
-----------+--------------------------------+----------------------
VfrCompile | VFR_CXXFLAGS = | VFR_LFLAGS =
| BUILD_OPTFLAGS = | EXTRA_LDFLAGS
| '-O2' + EXTRA_OPTFLAGS |
-----------+--------------------------------+----------------------
other apps | BUILD_CFLAGS/BUILD_CXXFLAGS = | BUILD_LFLAGS =
| [...] + BUILD_OPTFLAGS = | [...] + EXTRA_LDFLAGS
| [...] + '-O2' + EXTRA_OPTFLAGS |
This table shows
- that the VfrCompile compilation and linking flags are always a subset of
the corresponding flags used by the other apps,
- and that the EXTRA flags are always at the end.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1540244
Fixes: 81502cee20
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
While reviewing the patch that would land as 768b611136
("MdePkg/UefiLib: introduce EfiOpenFileByDevicePath()", 2018-08-16), Ray
pointed out that distinguishing EFI_FILE_MODE_CREATE was wasteful. Per
spec, if the file to create exists, then EFI_FILE_MODE_CREATE is ignored
by EFI_FILE_PROTOCOL.Open(), and the existent file is opened.
Therefore we don't need an attempt to "open-but-not-create" first, and a
fallback to "open-and-create-too" second -- that behavior is internal to
EFI_FILE_PROTOCOL.Open(). Remove the special-casing of
EFI_FILE_MODE_CREATE.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Suggested-by: Ruiyu Ni <ruiyu.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1074
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1.After the cleanup at "MdeModulePkg UiApp: Remove redundant functions",
the function "IsResetReminderFeatureEnable()" and the variable
"mFeaturerSwitch" become redundant so they have been removed.
2.Therefore, the "IF" expression has also been removed, whose judgment condition
is "IsResetReminderFeatureEnable()".
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are IsImageInsideSmram,FindImageRecord,SmmRemoveImageRecord,
SmmMemoryAttributesTableConsistencyCheck,DumpSmmMemoryMapEntry,
SmmMemoryMapConsistencyCheckRange,SmmMemoryMapConsistencyCheck,
DumpSmmMemoryMap,ClearGuardMapBit,SetGuardMapBit,AdjustMemoryA,
AdjustMemoryS,IsHeadGuard and IsTailGuard.
FindImageRecord() is called by SmmRemoveImageRecord(); however,
nothing calls SmmRemoveImageRecord().
SmmMemoryMapConsistencyCheckRange() is called by
SmmMemoryMapConsistencyCheck(); however, nothing calls
SmmMemoryMapConsistencyCheck().
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2:append the following to the commit message.
- FindImageRecord() is called by SmmRemoveImageRecord(); however,
nothing calls SmmRemoveImageRecord().
- SmmMemoryMapConsistencyCheckRange() is called by
SmmMemoryMapConsistencyCheck(); however, nothing calls
SmmMemoryMapConsistencyCheck().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The functions that are never called have been removed.
They are UfsPeimUnlinkMemBlock,UfsPeimRequestSense,
UfsPeimInquiry,UfsRwAttributes,UfsClearFlag,UfsReadFlag
and UfsFindAvailableSlotInTmrl.
https://bugzilla.tianocore.org/show_bug.cgi?id=1062
v2: Remove the comment that mentioned 'UfsPeimUnlinkMemBlock'
within function UfsPeimFreeMemPool().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: shenglei <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
