On macOS, /usr/bin/gcc is clang, and so doesn't have
the -Wno-error=stringop-overflow flag that was added
for gcc 12.
Update the GNUmakefile for DevicePath to skip setting
that on macOS.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The GenFw invocation with the --prm flag was previously reserved for
X64.
AArch64 platforms, built with GCC5, can also deploy PRM modules, hence
the --prm flag is also applicable in builds targeting the AARCH64
architecture.
This commit enables the --prm flag to be used for EDK2 builds targeting
AARCH64.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Print 'SubtypeGuid' field from the EFI_FREEFORM_SUBTYPE_GUID_SECTION
structure.
This value describes the raw data inside the section.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
Currently there is no labels for start and end of the
EFI_SECTION_FIRMWARE_VOLUME_IMAGE type section. Therefore it is not
possible to see where the FV section ends and another section starts.
Add labels for start and end of the FV sections to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently there is no labels for start and end of the encapsulation
sections. Therefore it is not possible to see where the encapsulation
section ends and another section starts.
Add labels for start and end of encapsulation sections to fix the
issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
- Correct typo in print statement,
- "BuildNumber" field is UINT16, therefore it needs "0x%04X" format
modifier,
- "VersionString" field is CHAR16, therefore the input data should be
processed to be displayed with "%s" printf modifier.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently sections with unknown types are displayed as
`EFI_SECTION_SMM_DEPEX` which is wrong.
Increase the highest value for the section type to 0x1C
for correct parsing.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Alignment attribute is not a bitmask, therefore we need to compare
field value with all alignment defines.
Remove duplicate print statements. Unify indent with other attribute
print statements.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
In function ?SetDevicePathEndNode?,
inlined from ?FileDevicePath? at DevicePathUtilities.c:857:5:
DevicePathUtilities.c:321:3: error: writing 4 bytes into a region of size 1 [-Werror=stringop-overflow=]
321 | memcpy (Node, &mUefiDevicePathLibEndDevicePath, sizeof (mUefiDevicePathLibEndDevicePath));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from UefiDevicePathLib.h:22,
from DevicePathUtilities.c:16:
../Include/Protocol/DevicePath.h: In function ?FileDevicePath?:
../Include/Protocol/DevicePath.h:51:9: note: destination object ?Type? of size 1
51 | UINT8 Type; ///< 0x01 Hardware Device Path.
| ^~~~
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Sdk/C/LzmaEnc.c: In function ?LzmaEnc_CodeOneMemBlock?:
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*p.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*(CLzmaEnc *)pp.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
cc1: all warnings being treated as errors
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3802
Since PRM module needs to support export table in PE-COFF, we'll
enhance GenFw tool to support this.
Add one export flag in GenFw tool. If export flag is set:
Step1: Scan ELF symbol table based on PRM module descriptor to get
descriptor offset address;
Step2: Find PRM handlers number and name in COFF file based on the
address from step1;
Step3: Write PRM info such as handler name and export RVA into COFF
export table.
PRM option currently only supports DXE RUNTIME driver and X64 arch.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Lixia Huang <lisa.huang@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Change GenFv for Arm architecture to generate a specific jump
instruction as image entry instruction, when the target entry label
is assembled with Thumb instruction set. This is possible since
SecCoreEntryAddress value fetched from the PE32 has its LSBit set when
the entry instruction executes in Thumb mode.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This is the fix of the regression issue at c6b872c6.
Based on ELF spec, readonly alloc section is .rodata section. It is used.
This fix is to add back original check logic for ELF section. Now,
the readonly alloc section and execute alloc section are regarded as .text.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Commit c6b872c updates GenFw base code attribute to find .text section.
With GCC49 tool chain, aslc file is compiled into elf image.
But, its text section has no CODE attribute. So, it can't be detected
by new GenFw tool.For this type file. its text section is not required.
Its data section will be converted to acpi table.
This fix is to remove assert check when the generated image is ACPI data.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
CLANG8ELF tool chain generated ELF image with the different attributes
in section. Update GenFw to handle them.
1. .text section with writable attribute (support)
2. .reloc section has the symbol for *ABS* (skip)
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
Currenly, when using the Brotli tool to compress data, the output
compressed binary file does not record complete compressed data
when size of input file is too large, which makes the data loss and
will trigger decompress-check issue.
The Brotli document mentioned:
The brotli tool use BrotliEncoderCompressStream method to compresses
input stream to output stream. Under some circumstances (e.g. lack of
output stream capacity) the BrotliEncoderOperation would require
several calls to BrotliEncoderCompressStream. The method must be
called again until both input stream is depleted and encoder has no
more output after the method is called.
This patch fixes this issue based on the Brotli document.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3165
There are 2 reasons to convert Split tool from C to Python.
1. We are in the process of moving the Basetools Python code
to a separate repository. But there still are many C tools under
edk2/BaseTools. To make all Basetools be in the separate repo,
we can convert the C tools to Python tools.
2. The original Split tool is very slow. This python tool can reduce
90% time.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
This is the regression issue in BaseTools BrotliCompress after Brotli
is changed to submodule. BrotliCompress should store the source size
and scratch buffer size into the header of the compressed binary data.
But now, BrotliCompress doesn't store them. So, BrotliDecompress
can't work.
To fix this issue, BrotliCompress tool main() function should be provided.
It needs to support the options of -e, -d, -o file, -g gap, -q level.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
On windows system, when use command chcp displays the number of the
active console code page, if the active console code is 936, run
make cleanall in the BaseTools will hang.
Issue reproduce step:
chcp 936
edksetup.bat VS2015
cd BaseTools
nmake cleanall
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Provided a mechanism for UEFI FW to identify and hand off bootable
NVDIMM namespaces to the OS by standardizing the EFI device path.
EFI device path for physical NVDIMM devices changed from an ACPI
_ADR device to an ACPI NVDIMM device for correctness.
(UEFI 2.8 mantis 1858)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
In question level, a new flag EFI_IFR_FLAG_REST_STYLE is defined.
(UEFI 2.8 mantis 1853)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
