Previous to this change, PvScsiFreeRings() was not undoing all
operations that was done by PvScsiInitRings().
This is because PvScsiInitRings() was both preparing rings (Allocate
memory and map it for device DMA) and setup the rings against device by
issueing a device command. While PvScsiFreeRings() only unmaps the rings
and free their memory.
Driver do not have a functional error as it makes sure to reset device
before every call site to PvScsiFreeRings(). However, this is not
intuitive.
Therefore, prefer to refactor the setup of the ring against device to a
separate function than PvScsiInitRings().
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331225637.123318-1-liran.alon@oracle.com>
[lersek@redhat.com: rename FreeDMACommBuffer label to FreeDmaCommBuffer]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Sean reported that VS2019 build produce the following build error:
INFO - PvScsi.c
INFO - Generating code
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): error C2220: the
following warning is treated as an error
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): warning C4244: '=':
conversion from 'const UINT16' to 'UINT8', possible loss of data
This result from an implicit cast from PVSCSI Response->ScsiStatus
(Which is UINT16) to Packet->TargetResponse (Which is UINT8).
Fix this issue by adding an appropriate explicit cast and verify with
assert that this truncation do not result in loss of data.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2651
Reported-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331110452.51992-1-liran.alon@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: rewrap VS2019 diags in commit msg for PatchCheck.py]
Laszlo suggested that as I have contributed the OvmfPkg PVSCSI driver, I
will also register myself as a reviewer in Maintainers.txt.
In addition, as Nikita have assisted the development of the PVSCSI
driver and have developed another similar OvmfPkg SCSI driver, add him
as a reviewer to PVSCSI driver as-well.
Cc: Nikita Leshenko <nikita.leshchenko@oracle.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331110244.51409-1-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
[lersek@redhat.com: fixup "F:" pattern by appending slash character]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When DHCP is misconfigured on a network segment, such that two DHCP
servers attempt to reply to requests (and therefore race with each other),
the edk2 PXE client can confuse itself.
In PxeBcDhcp4BootInfo() / PxeBcDhcp6BootInfo(), the client may refer to a
DHCP reply packet as an "earlier" packet from the "same" DHCP server, when
in reality both packets are unrelated, and arrive from different DHCP
servers.
While the edk2 PXE client can do nothing to fix this, it should at least
not ASSERT() -- ASSERT() is for catching programming errors (violations of
invariants that are under the control of the programmer). ASSERT()s should
in particular not refer to external data (such as network packets). What's
more, in RELEASE builds, we get NULL pointer references.
Check the problem conditions with actual "if"s, and return
EFI_PROTOCOL_ERROR. This will trickle out to PxeBcLoadBootFile(), and be
reported as "PXE-E99: Unexpected network error".
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200331004749.16128-1-lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2032
'ping' command's receive flow utilizes a single Rx token which it
attempts to reuse before recycling the previously received packet.
This causes a situation where under ICMP traffic,
Ping6OnEchoReplyReceived() function will receive an already
recycled packet with EFI_SUCCESS token status and finally
dereference invalid pointers from RxData structure.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported for the Status variable in
AddGenericInitiatorAffinity() as it is not initialised
to a default value. This condition is only valid if
GenInitAffCount is equal to 0. Since GenInitAffCount
is already checked in BuildSratTable() this condition
can never happen.
The value of the Status variable is returned in
failure cases from appropriate locations in
AddGenericInitiatorAffinity(). The only case
where Status value is being used un-initialised
is the return statement at the end of
AddGenericInitiatorAffinity().
Therefore, to fix this issue EFI_SUCCESS can be
safely returned instead of returning the Status
variable at the end of the function.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the SRAT Generator modules.
Remove the CONST qualifier for the ImageHandle and the
SystemTable pointer in the library constructor and destructor
to make it compatible with the formal declaration.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2538
For LzmaCompress or BrotliCompress, the platform may use the different
options and add their batch file, such as LzmaCompressPlatform.
Then, specify it in platform.dsc [BuildOptions] to override the default
one in tools_def.txt.
*_*_*_LZMA_PATH = LzmaCompressPlatform
This override tool will be used. But, its name is not specified in the
generated GuidedSectionTools.txt.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In case device is constrained by IOMMU or guest is running under AMD SEV,
input/output buffers provided to device (DataBuffer and SenseData) needs
to be explicitly mapped to device by PciIo->Map().
To avoid the overhead of mapping/unmapping the DataBuffer and SenseData
to the device for every SCSI requst (and to simplify code), introduce a
single DMA communication buffer that will be mapped to device on
initialization. When a SCSI request needs to be sent to device, the
DataBuffer and SenseData will be copied from/to the DMA communication
buffer as required. This will be done by the following commits.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-15-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement EXT_SCSI_PASS_THRU.GetNextTarget() and
EXT_SCSI_PASS_THRU.GetNextTargetLun().
ScsiBusDxe scans all MaxTarget * MaxLun possible devices.
This can take unnecessarily long for large number of targets.
To deal with this, VirtioScsiDxe has defined PCDs to limit the
MaxTarget & MaxLun to desired values which gives sufficient
performance. It is very important in virtio-scsi as it can have
very big MaxTarget & MaxLun.
Even though a common PVSCSI device has a default MaxTarget=64 and
MaxLun=0, we implement similar mechanism as virtio-scsi for completeness.
This may be useful in the future when PVSCSI will have bigger values
for MaxTarget and MaxLun.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-7-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
ACPI 6.3 added a 16-bit SPE overflow Interrupt field, replacing
2 of the 3 reserved bytes that are defined at the end of the
GICC structure for 6.0.
Add a new macro to initialise the new field.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Building OVMF for X64 with secure boot enabled on VS2019 results in
the following error:
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
error C2220: the following warning is treated as an error
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
warning C4244: '=': conversion from 'UINTN' to 'UINT32', possible loss of data
Suppress the error by making the cast explicit.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2636
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Dynamic Tables Factory protocol has an erroneous
EFIAPI calling convention macro in the function
pointer declaration.
Remove the erroneous EFIAPI calling convention macro
from the interface declarations.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4267: 'return': conversion
from 'size_t' to 'UINT32', possible loss of data' for a number of
functions that compute the IORT node length. Similarly, it reports
warnings for IORT node length field assignments as the length
field is 16-bit wide.
This patch adds type casts at appropriate places and also implements
validations to ensure that the max width of the respective fields
is not exceeded.
This patch also fixes a typo in one of the local variable names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Removing GT Block frame count check from AddGTBlockTimerFrames()
as this is already validated in BuildGtdtTable().
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ARM DCC serial port subtype is an option that is
supported by the DBG2 generator. However, the serial
port initialisation should only be done for PL011/SBSA
compatible UARTs.
Add check to conditionally initialise the serial port.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The VS2017 compiler reports 'warning C4366: The result of
the unary '&' operator may be unaligned' if an address of
an unaligned structure member is passed as an argument to
a function.
Fix this warning by using local variables in place of
unaligned structure members.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4244: '=': conversion from
'const UINT32' to 'UINT8', possible loss of data' when the ACPI
table revision field is being updated.
The width of the revision field in the EFI_ACPI_DESCRIPTION_HEADER
struct is 8-bit wide. Therefore, to fix the above warning make the
ACPI Table revision field usage 8-bit wide across Dynamic Tables
Framework.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ArmBootArch field of the FADT table is 16-bit wide. The
VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT16', possible loss of data' when assigning the
CM_ARM_BOOT_ARCH_INFO.BootArchFlags value as the width of this
field in CM_ARM_BOOT_ARCH_INFO is 32-bit wide.
To fix this warning, update the CM_ARM_BOOT_ARCH_INFO struct
to make the BootArchFlags field 16-bit wide. This also makes
it compatible with the ACPI FADT specification.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4267: '=': conversion from
'size_t' to 'UINT16', possible loss of data'.
The sizeof() operator is used to calculate the size of the
GT Block structure. The length field in the GT Block structure
is 16-bit wide. Since the return type of sizeof() operator
is size_t the VS2017 compiler reports the above warning.
To fix the warning, an explicit type cast is added. An additional
check is also performed to ensure that the calculated GT Block
length does not exceed MAX_UINT16.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The length field for the Processor Hierarchy node structure is
8-bit wide while the number of private resource field is 32-bit
wide. Therefore, the GetProcHierarchyNodeSize() returns the size
as a 32-bit value.
The VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT8', possible loss of data' while assigning the
length field of the Processor Hierarchy node structure.
To fix this, a type cast is added. In addition, there is a check
to ensure that the Processor Hierarchy node size does not exceed
MAX_UINT8.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4244: '=': conversion
from 'UINT16' to 'UINT8', possible loss of data' for the
SPCR InterfaceType field assignment.
The SPCR InterfaceType field uses the same encoding as that
of the DBG2 table Port Subtype field. However SPCR.InterfaceType
is 8-bit while the Port Subtype field in DBG2 table is 16-bit.
Since the Configuration Manager represents the Serial port
information using the struct CM_ARM_SERIAL_PORT_INFO, the
PortSubtype member in this struct is 16-bit.
To fix the warning an explicit type case is added. A validation
is also added to ensure that the Serial Port Subtype value
provided by the Configuration Manager is within the 8-bit
range (less than 256).
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The VS2017 compiler reports 'error C2016: C requires that
a struct or union has at least one member' for the struct
CM_ARM_CPU_INFO.
Remove struct CM_ARM_CPU_INFO as this is not in use.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The edk2 BaseTools report a warning if a local header file
is not listed under the [Sources] section in the INF file.
Add header files to the [Sources] section in the respective
INF files to fix the warnings.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the Generator modules. VS2017 compiler also
reports similar warnings for the DXE entry points.
Remove the CONST qualifier for the SystemTable pointer (the
second parameter to the constructor/destructor/DXE Entry
point) to make it compatible with the formal declaration.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
