Install the performance table into the UEFI configuration table.
This will allow the shell application to get this if the system
is not using ACPI.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Introduces two new APIs to EDKII_VARIABLE_POLICY_PROTOCOL:
1. GetVariablePolicyInfo()
2. GetLockOnVariableStateVariablePolicyInfo()
These allow a caller to retrieve policy information associated with
a UEFI variable given the variable name and vendor GUID.
GetVariablePolicyInfo() - Returns the variable policy applied to the
UEFI variable. If the variable policy is applied toward an individual
UEFI variable, that name can optionally be returned.
GetLockOnVariableStateVariablePolicyInfo() - Returns the Lock on
Variable State policy applied to the UEFI variable. If the Lock on
Variable State policy is applied to a specific variable name, that
name can optionally be returned.
These functions can be useful for a variety of purposes such as
auditing, testing, and functional flows.
Also fixed some variable name typos in code touched by the changes.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Message-Id: <20231030203112.736-2-mikuback@linux.microsoft.com>
Reference: https://github.com/tianocore/edk2/pull/4892
BmExpandPartitionDevicePath is called to expand "short-form" device paths
which are commonly used with OS boot options. To expand a device path, it
calls EfiBootManagerConnectAll to connect all the possible BlockIo
devices in the system to search for a matching partition. However, this
is sometimes unnecessary on certain platforms (such as OVMF/QEMU) because
the boot devices are previously explicity connected
(See: ConnectDevicesFromQemu). EfiBootManagerConnectAll calls are
extremely costly in terms of boot time and resources and should be avoided
whenever feasible.
(
OVMF call tree:
PlatformBootManagerAfterConsole() [OvmfPkg/Library/PlatformBootManagerLib/BdsPlatform.c]
PlatformBdsConnectSequence() [OvmfPkg/Library/PlatformBootManagerLib/BdsPlatform.c]
ConnectDevicesFromQemu() [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
...
EfiBootManagerRefreshAllBootOption() [MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c]
...
SetBootOrderFromQemu() [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
Match() [OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.c]
EfiBootManagerGetLoadOptionBuffer() [MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c]
BmGetNextLoadOptionBuffer() [MdeModulePkg/Library/UefiBootManagerLib/BmLoadOption.c]
BmGetNextLoadOptionDevicePath() [MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c]
BmExpandPartitionDevicePath() [MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c]
)
Therefore optimize BmExpandPartitionDevicePath to first search the
existing BlockIo handles for a match. If a match is not found, then
fallback to the original code to call EfiBootManagerConnectAll and search
again. Thus, this optimization should be extremely low-risk given the
fallback to previous behavior.
NOTE: The existing optimization in the code to use a "HDDP" variable to
save the last matched device paths does not cover the first time a boot
option is expanded (i.e. before the "HDDP" is created) nor when the device
configuration has changed (resulting in the boot device moving to a
different location in the PCI Bus/Dev hierarchy). This new optimization
covers both of these cases on requisite platforms which explicity connect
boot devices.
In our testing on OVMF/QEMU VMs with dozens of configured vnic devices,
these extraneous calls to EfiBootManagerConnectAll from
BmExpandPartitionDevicePath were found to cause many seconds (or even
minutes) of additional VM boot time in some cases - due to the vnics
being unnecessarily connected.
Cc: Zhichao Gao zhichao.gao@intel.com
Cc: Ray Ni ray.ni@intel.com
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Message-Id: <20231010150644.37857-1-Aaron.Young@oracle.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
[lersek@redhat.com: add OVMF call tree to commit message]
Many arrays are defined with a length of MAX_MENU_NUMBER in
FormGuid.h. Two of those are BootOptionOrder and DriverOptionOrder.
In UpdatePage.c, a pointer is set to either of those arrays. The
array buffer is accessed using an index whose range is checked after
the pointer to the array is dereferenced. This change moves the check
before the dereference.
In another place in the file, the ConsoleCheck pointer is also set to
an array buffer with MAX_MENU_NUMBER elements. Only an ASSERT()
currently checks the range of the array index. This change
conditionalizes the pointer dereference itself on the range of Index.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The EFI_RNG_PROTOCOL can use the RngLib. The RngLib has multiple
implementations, some of them are unsafe (e.g. BaseRngLibTimerLib).
To allow the RngDxe to detect when such implementation is used,
add a GetRngGuid() function to the RngLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
In order to use PcdCpuRngSupportedAlgorithm in the MdePkg in a
following patch and to avoid making the MdePkg dependent on another
package, move PcdCpuRngSupportedAlgorithm to the MdePkg.
As the Pcd is only used for AARCH64, place it in an AARCH64
specific sections.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Kun Qin <kun.qin@microsoft.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4504
The BaseRngLibTimerLib allows to generate number based on a timer.
This mechanism allows to have a basic non-secure implementation
for non-production platforms.
To bind and identify Random Number Generators implementations with
a GUID, an unsafe GUID should be added. This GUID cannot be added
to the MdePkg unless it is also added to a specification.
To keep the MdePkg self-contained, copy the BaseRngLibTimerLib to
the MdeModulePkg. This will allow to define an unsafe Rng GUID
in a later patch in the MdeModulePkg.
The MdePkg implementation will be removed later. This allows to give
some time to platform owners to switch to the MdeModulePkg
implementation.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kun Qin <kun.qin@microsoft.com>
Fix smm perf issue in DxeCorePerformanceLib. In
current code logic, total SMM perf record is copied
multiple times to FPDT table if multiple ReadyToBoot
events are signaled. This patch changes the function
InternalGetSmmPerfData() to only get newly generated
Smm perf data. Then previous generated Smm perf data
won't be copied to FPDT again.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4470
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
__FUNCTION__ is a pre-standard extension that gcc and Visual C++ among
others support, while __func__ was standardized in C99.
Since it's more standard, replace __FUNCTION__ with __func__ throughout
MdeModulePkg.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Update MdeModulePkg host-based unit test INF files to only list
VALID_ARCHITECTURES of IA32 and X64 to align with all other
host-based unit test INF files. The UnitTestFrameworkPkg only
provides build support of host-based unit tests to OS applications
for IA32 and X64.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Oliver Smith-Denny <osde@linux.microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Some platforms don't support S3 with PcdAcpiS3Enable set as False.
Debug mode bios will ASSERT at this time as Follows.
ASSERT_RETURN_ERROR (Status = Out of Resources)
DXE_ASSERT!: Edk2\MdePkg\Library\BaseS3PciSegmentLib\S3PciSegmentLib.c
(61): !(((INTN)(RETURN_STATUS)(Status)) < 0)
Steps to reproduce the issue:
1.Set PcdAcpiS3Enable to FALSE.
2.Build the bios in debug mode.
3.Power on and Check the serial log.
Note: Prerequisite is that S3PciSegmentLib is Called and
the caller's code is run.
Root Cause:
S3PciSegmentLib call S3BootScriptLib controlled by PcdAcpiS3Enable.
If PcdAcpiS3Enable set as false, S3BootScriptLib will return error
status(Out of Resources).
S3PciSegmentLib will ASSERT if S3BootScriptLib return error.
Solution:
Make S3BootScriptLib return success if PcdAcpiS3Enable was disabled,
which behave as a null S3BootScriptLib instance which just return success
for no action is required to do.
Signed-off-by: JunX1 Li <junx1.li@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sunny Wang <sunny.wang@arm.com>
Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Cc: G Edhaya Chandran <edhaya.chandran@arm.com>
Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3986
The EFI_STATUS_CODE_DATA_MAX_SIZE is defined as 200 in MdeModulePkg.
After reducing 96byte buffer for variable parameters it is limited to
only 104 char debug string. This is a non-necessary limitation.
This change sets EFI_STATUS_CODE_DATA_MAX_SIZE to 0x200, and moves
MAX_EXTENDED_DATA_SIZE definition to the same header file with value
of EFI_STATUS_CODE_DATA_MAX_SIZE + sizeof (EFI_STATUS_CODE_DATA)
which is used in ReportStatusCodeLib to support longer debug string.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Cosmo Lai <cosmo.lai@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Today InitializeCpuExceptionHandlersEx is called from three modules:
1. DxeCore (links to DxeCpuExceptionHandlerLib)
DxeCore expects it initializes the IDT entries as well as
assigning separate stacks for #DF and #PF.
2. CpuMpPei (links to PeiCpuExceptionHandlerLib)
and CpuDxe (links to DxeCpuExceptionHandlerLib)
It's called for each thread for only assigning separate stacks for
#DF and #PF. The IDT entries initialization is skipped because
caller sets InitData->X64.InitDefaultHandlers to FALSE.
Additionally, SecPeiCpuExceptionHandlerLib, SmmCpuExceptionHandlerLib
also implement such API and the behavior of the API is simply to initialize
IDT entries only.
Because it mixes the IDT entries initialization and separate stacks
assignment for certain exception handlers together, in order to know
whether the function call only initializes IDT entries, or assigns stacks,
we need to check:
1. value of InitData->X64.InitDefaultHandlers
2. library instance
This patch cleans up the code to separate the stack assignment to a new API:
InitializeSeparateExceptionStacks().
Only when caller calls the new API, the separate stacks are assigned.
With this change, the SecPei and Smm instance can return unsupported which
gives caller a very clear status.
The old API InitializeCpuExceptionHandlersEx() is removed in this patch.
Because no platform module is consuming the old API, the impact is none.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
InitializeCpuExceptionHandlers() expects caller allocates IDT while
InitializeCpuInterruptHandlers() allocates 256 IDT entries itself.
InitializeCpuExceptionHandlers() fills max 32 IDT entries allocated
by caller. If caller allocates 10 entries, the API just fills 10 IDT
entries.
The inconsistency between the two APIs makes code hard to
unerstand and hard to share.
Because there is only one caller (CpuDxe) for
InitializeCpuInterruptHandler(), this patch updates CpuDxe driver
to allocates 256 IDT entries then call
InitializeCpuExceptionHandlers().
This is also a backward compatible change.
With this change, InitializeCpuInterruptHandlers() is removed
completely.
And InitializeCpuExceptionHandlers() fills max 32 entries for PEI
and SMM instance, max 256 entries for DXE instance.
Such behavior matches to the original one.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds a new library class VariableFlashInfoLib that abstracts access
to variable flash information. The instance provided first attempts
to retrieve information from the Variable Flash Info HOB. If that
HOB is not present, it falls back to the PCDs defined in
MdeModulePkg.
This fall back behavior provides backward compatibility for platforms
that only provide PCDs but also allows platforms that need to
dynamically provide the information using the Variable Flash Info HOB
to do so at runtime.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2957
1. Allocate performance data table at EndOfDxe and then lock the varible
which store the table address at EndOfDxe.
2. Enlarge PCD gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize
from 0x20000 to 0x30000 in order to hold the Delta performance data
between EndOfDxe and ReadyToBoot.
3. SMM performance data is collected by DXE modules through SMM communication
at ReadyToBoot before.
Now to do SMM communication twice, one for allocating the performance
size at EndOfDxe, another is at ReadyToBoot to get SMM performance data.
4. Make SmmCorePerformanceLib rather than FirmwarePerformanceSmm to communicate
with DxeCorePerformanceLib for SMM performance data and size.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Enhance RelocateCapsuleToRam() to skip creation of the Capsule on Disk
file name capsule if PcdSupportUpdateCapsuleReset feature is not enabled.
This avoids an EFI_UNSUPPORTED return status from UpdateCapsule() when the
file name capsule is encountered and PcdSupportUpdateCapsuleReset is FALSE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Bob Morgan <bobm@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding two unit test case for UefiSortLib. One is a test on
sorting an array of UINT32 by using PerformQuickSort, another
is a test on comparing the same buffer by using StringCompare.
Add 'main' function name to ECC exception list to avoid ECC
error.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This library extends Boot Maintenance Menu and allows to select
Boot Discovery Policy. When choice is made BootDiscoveryPolicy
variable is set. Platform code can use this variable to decide
which class of device shall be connected.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3135
When Boot Menu does not exist in the BootOrder, BmRegisterBootManagerMenu
will create one into list. However, it should be put at the "end" of
BootOrder instead of "start" of BootOrder. Replace 0 by -1 to adjust
order of load options.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add HiiGetStringEx and leveraged by HiiGetString function to support
getting string with the best language in optionally. This avoids the
string in x-uefi language is misled to the language defined by
"PlatformLang" or the "Supported Languages". This change is introduced
to support x-uefi keyword language for configuring BIOS setting.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
