Previous commit fixed that check in DXE, this one now for PEI.
Signed-off-by: Mara Sophie Grosch <littlefox@lf-net.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Fix the check for NVMe command set being supported by the controller.
Was problematic with qemu (6.2.0, Debian 1:6.2+dfsg-3), which sets 0xC1
in that register, making the OVMF think the NVMe controller does not
support NVMe.
Uncovered by commit 9dd14fc91c, which
changed the number of bits included in the Css register from 4 to 8.
Signed-off-by: Mara Sophie Grosch <littlefox@lf-net.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
No need to check the interface protocol then conditionally setting,
just set it to BOOT_PROTOCOL and check for error.
This is what Linux does for HID devices as some don't follow the USB spec.
One example is the Aspeed BMC HID keyboard device, which adds a massive
boot delay without this patch as it doesn't respond to
'GetProtocolRequest'.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Move the logic that stores starting PCI attributes and sets the
EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute to
DriverBindingStart() before the memory that backs the
DMA engine is allocated.
This ensures that the DMA-backing memory is not forcibly allocated
below 4G in system address map. Otherwise the allocation fails on
platforms that do not have any memory below the 4G mark and the drive
initialisation fails.
Leave the PCI device enabling attribute logic in NvmeControllerInit()
to ensure that the device is re-enabled on reset in case it was
disabled via PCI attributes.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tomas Pilar <quic_tpilar@quicinc.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
When setting mVirtualMap to NULL also set mVirtualMapMaxIndex to 0.
Without that RuntimeDriverConvertPointer() will go search the ZeroPage
for EFI_MEMORY_DESCRIPTOR entries.
In case mVirtualMapMaxIndex happens to be small small enough that'll go
unnoticed, the search will not find anything and EFI_NOT_FOUND will be
returned.
In case mVirtualMapMaxIndex is big enough the search will reach the end
of the ZeroPage and trigger a page fault.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3811
Remove ASSERT() statements that are triggered if a platform provides
an override of PCI ROM attached to a PCI Controller. The PCI Platform
Protocol allows the platform to provide a PCI ROM image for a PCI
Controller. This works for PCI Controllers that do not have an attached
PCI ROM, but the platform is not allowed to replace the PCI ROM for a
PCI Controller that has its own PCI ROM. Removing these ASSERT()
statements enables this additional use case.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
This changes is by adding 50ms delay during voltage switching from 3.3V to
1.8V, plus adding a goto Voltage33Retry for 3.3V checking and retrying.
Change is for Enabling OS boot from SD card through UEFI payload.
Signed-off-by: Aiman Rosli <muhammad.aiman.rosli@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Read Disk does a modification of ExtMbrStartingLba with the code MultU64x32
(ExtMbrStartingLba, BlockSize) Error detection to see if ExtMbrStartingLBA
has a value of 0. This is invalid as LBA 0 = MBR. After modification, the
next time ExtMbrStartingLba is in this function if ExtMbrStartingLba is set
to 0 in the MBR it never passes the while/do evaluation It is multiplied by
0 by read disk , set to 0 by an invalid MBR and goes back to evaluation
This condition will also cause Ws19 and WS22 to hang, however Microsoft has
developed a hotfix patch that will be released in 2022
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Craig Edwards <craig.edwards@dell.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before trying to access parent root port to check ARI capabilities,
enumerator should see if Endpoint device is not Root Complex integrated
to avoid undefined parent register accesses.
Signed-off-by: Damian Bassa <damian.bassa@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
gcc-11 (fedora 35):
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c: In function ?UsbIoBulkTransfer?:
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c:277:12: error: ?UsbHcBulkTransfer? accessing 80 bytes in a region of size 8 [-Werror=stringop-overflow=]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
When use the UsbHcAllocMemFromBlock() and UsbHcFreeMem() to allocate
memory and free memory for the UHC, it should use the corresponding host
address but not the pci bus address.
Signed-off-by: jdzhang <jdzhang@zd-tech.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2957
1. Allocate performance data table at EndOfDxe and then lock the varible
which store the table address at EndOfDxe.
2. Enlarge PCD gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize
from 0x20000 to 0x30000 in order to hold the Delta performance data
between EndOfDxe and ReadyToBoot.
3. SMM performance data is collected by DXE modules through SMM communication
at ReadyToBoot before.
Now to do SMM communication twice, one for allocating the performance
size at EndOfDxe, another is at ReadyToBoot to get SMM performance data.
4. Make SmmCorePerformanceLib rather than FirmwarePerformanceSmm to communicate
with DxeCorePerformanceLib for SMM performance data and size.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Enhance RelocateCapsuleToRam() to skip creation of the Capsule on Disk
file name capsule if PcdSupportUpdateCapsuleReset feature is not enabled.
This avoids an EFI_UNSUPPORTED return status from UpdateCapsule() when the
file name capsule is encountered and PcdSupportUpdateCapsuleReset is FALSE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Bob Morgan <bobm@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3680
This patch fixes the following issue:
The global variable gHandleList is a linked list.
This list is locked when a entry is added or removed from the list,
but there is no lock when iterating this list in function
CoreValidateHandle().
It can lead to "Handle.c (76): CR has Bad Signature" assertion if the
iterated entry in the list is just removed by other task during iterating.
Currently some caller functions of CoreValidateHandle() have
CoreAcquireProtocolLock(), but some caller functions of
CoreValidateHandle() do not CoreAcquireProtocolLock().
Add CoreAcquireProtocolLock() always when CoreValidateHandle() is called,
Also, A lock check is added in the CoreValidateHandle().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Add correct content to the 'SdDxeExtra.uni' file.
Include 'EmmcDxeExtra.uni' and 'SdDxeExtra.uni' files to their
appropriate INF files.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3666
Currently, CoreLocateHandleBuffer() follows three steps:
1) get the size of protocol database firstly
2) allocate the buffer based on the size
3) get the protocol database into the buffer
There is no lock protection for the whole three steps. If a new protocol
added in step 2) by other task, e.g. (event timer handle USB device
hotplug). The size of protocol database may be increased and cannot fit
into the previous buffer in step 3). The protocol database cannot be
returned successfully, EFI_BUFFER_TOO_SMALL error will be returned.
This patch adds the lock to protect the whole three steps.
It can make sure the correct protocol database be returned.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Dandan Bi dandan.bi@intel.com
Reviewed-by: Liming Gao gaoliming@byosoft.com.cn