This module consumes SMM Registers HOB (SMI_GBL_EN and SMI_APM_EN) to
install SMM control 2 protocol gEfiSmmControl2ProtocolGuid.
The protocol activate() would set SMI_GBL_EN and SMI_APM_EN and trigger
SMI by writing to IO port 0xB3 and 0xB2.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
V2: Fix more header files on #ifdef variable
ECC reported some issues on UefiPayloadPkg, this patch fixed
most of them except several files including ElfLib\Elf32.h,
coreboot.h, CbParseLib.c, etc.
It also removed unused functions in ResetSystemLib and Hob.c.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Current UefiPayloadPkg can suport PCI root bridge info HOB
provided by bootloader. For UniversalPayload, bootloader can
directly provide this HOB for payload consumption. However,
for legacy UEFI payload, it is required to migrate the HOB
information from bootloader HOB space to UEFI payload HOB
space. This patch added the missing part for the bootloader
ParseLib in order to support both legacy and universal UEFI
payload.
This patch was tested on Slim Bootloader with latest UEFI
payload, and it worked as expected.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Remove asm code used for payload entry.
Use patchable PCD instead a fixed PCD PcdPayloadStackTop to avoid
potential conflict.
Based on the removal, use same HobLib regardless UNIVERSAL_PAYLOAD.
Use same PlatformHookLib regardless UNIVERSAL_PAYLOAD. The original
PlatformHookLib was removed and UniversalPayloadPlatformHookLib was
rename to new PlatformHookLib.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
V2: Use LittleEndianStructure by review comment.
From the universal scalable firmware payload requirement V0.75,
Payload must have Universal Payload Information Section ".upld_info"
So update the build tool to add this section.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
V2: Update BuildHobFromAcpi() to return a HOB pointer.
For universal UEFI payload, build a HOB from the ACPI table, so that
other modules could use this info from HOB at very early DXE phase.
This code are shared by universal payload and non universal payload.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
UefiPayloadEntry's AllocatePool() applies the "sizeof" operator to
HOB index rather than the HOB header structure. This yields 4 Bytes
compared to the 8 Bytes the structure header requires. Fix the call
to allocate the required space instead.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Marvin H?user <mhaeuser@posteo.de>
V1: Add quotes when using $(ARCH) in .dsc and .fdf file.
The quotes are added due to the way by which Core ci parse the .dsc file.
Add UINTN in Hob.c to fix cast from pointer to integer of different size error.
V2: Delete lines which reference ShellBinPkg.The pkg doesn't exist in edk2.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Change the default value of the below PCDs to diable some legacy feature.
gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|FALSE
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE
gUefiCpuPkgTokenSpaceGuid.PcdCpuNumberOfReservedVariableMtrrs|0
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Define some PCDs as DynamicEX PCD to be used as global variable.
Because PcdUartDefaultBaudRate is defined as DynamicEX, remove the code
to set it in platformlib. That code was actually redundant.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Add the three PCDs as fixed at build PCD:
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister
The default value is defined as Macro, so it can be passed in at build
command.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
For R_386_RELATIVE and R_X86_64_RELATIVE, today's logic assumes that
the content pointed by the Rela->r_offset is 0 but it's not always
TRUE. We observed that linker may set the content to Rela->r_addend.
The patch removes the assertion.
There is no functionality impact for this patch.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Per ELF spec, the DT_REL/DT_RELA tag in dynamic section stores the
virtual address of the relocation section.
But today's code logic treats it as the section offset and finds
the relocation section whose offset equals to DT_REL/DT_RELA.
The logic can work when the section offset equals to the section
virtual address. But when the ELF is generated from the link script
that reserves a sizeof(pe_header) in the file beginning, the section
offset doesn't equal to section virtual address. Such logic can
not find the relocation section.
The patch fixes this bug.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Edk2 bootloader will pass the pei pcd database, and UPL also contain a
PCD database.
Dxe PCD driver has the assumption that the two PCD database can be
catenated and the local token number should be successive。
This patch will manually fix up the UPL PCD database to meet that
assumption.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
From gUniversalPayloadExtraDataGuid Guid Hob, get the Dxe FV information,
and get the Dxe Core from the FV.
Also, make sure if there are muliple FV hob, the FV hob pointing to this FV
will be the first in the hob list.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This patch create the UniversalPayload Entry based on the UefiPayload
Entry. It implements the logic to find a proper memory range to create the
new Hob and migrate the Hobs from Bootloader.
To make the change history clear, the logic to get the DxeCore will be in
the next patch.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
For payload entry, use PayloadEntryHobLib as HobLib and payload entry
should initialize hob base.
For DxeCore, use new added DxeHobLib as HobLib, and DxeCore will
initialize hob base.
For Dxe Driver, use new added DxeHobLib as HobLib, and use DxeHobListLib
to initialize hob base.
Adding a new library DxeHobLib + DxeHobListLib instead of using the
DxeHobLib.inf in MdePkg is because the constructor needed be separated
from DxeHobLib.
If not, when building UefiPayloadPkg, the dependency chain is as below:
DebugLib -> SerialPortLib -> PlatformHookLib -> HobLib -> DebugLib
Each library has a constructor, and this becomes a constructor circle.
To break the circle, separate the constructor from the HobLib as a new
DxeHobListLib, which won't depend on DebugLib.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Previous it would hang in CpuDxe if DXE drivers are dispatched above 4GB.
Now remove the work around since the fixed in CpuDxe are merged.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
