Bugzilla: 3415 (https://bugzilla.tianocore.org/show_bug.cgi?id=3415)
The GICv3 architecture supports up to 1020 ordinary interrupt
lines. The actual number of interrupts supported is described by the
ITLinesNumber field in the GICD_TYPER register. The total number of
implemented registers is normally calculated as
32*(ITLinesNumber+1). However, maximum value (0x1f) is a special case
since that would indicate that 1024 interrupts are implemented.
Add handling for this special case in ArmGicGetMaxNumInterrupts.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The SCP-firmware has moved to full support for SCMIv2 which means that
the base protocol can be either compliant with SCMI v1 or v2.
Allow any version between SCMI v1.0 and SCMI v2.0 to be compatible
with the current implementation.
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
'Manufacturer' was spelled wrongly in a comment in
MiscChassisManufacturerData.c.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The calculation of the chassis SKU number field was being calculated
incorrectly, forgetting that there's one element already present in
the structure.
Fix the calculation and improve code readability by introducing a
SkuNumberField variable.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Add a new function to OemMiscLib to allow platforms to report their boot
status into the Type32 SMBIOS table.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Add OemMiscLib calls to allow platforms to provide the following
information about the chassis:
o Bootup state
o Power supply/supplies state
o Thermal state
o Security state
o Chassis height (in RMU)
o Number of power cords
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
8005:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
8007:
There should be no use of short (single character) variable names
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Complex types should be typedef-ed
The error is due to the a nested structure declaration.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Complex types should be typedef-ed
The error is due to the a nested structure declaration.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
All include file contents should be guarded by
a #ifndef statement.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
All include file contents should be guarded by
a #ifndef statement.
This patch replaces a "#if !defined [...]" statement
by a "#ifndef [...]" statement, preventing Ecc to
throw an error.
Edk2 coding standard stating that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used."
the include guard is also updated.
Ref:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
5_source_files/53_include_files#
5-3-5-all-include-file-contents-must-be-protected-by-a-include-guard
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Function name should be left justified,
followed by the beginning of the parameter list,
with the closing parenthesis on its own line,
indented two spaces
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Commit: 142fa386eb
removes the ArmGicSecLib. The file ArmGic/ArmGicSecLib.c
was exclusively used by this library. Thus, this file should
also be removed.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source files
[ArmPkg/Library/SemihostLib/SemihostPrivate.h]
is existing in module
ArmPkg/Library/SemihostLib/SemihostLib.inf
but is not described in the INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source files
[ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h]
is existing in module
ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
but is not described in the INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source files
[ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h]
is existing in module
ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
but is not described in the INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source files
[ArmPkg/Drivers/ArmScmiDxe/ArmScmiPerformanceProtocolPrivate.h]
[ArmPkg/Drivers/ArmScmiDxe/ScmiPrivate.h]
[ArmPkg/Drivers/ArmScmiDxe/ScmiDxe.h]
[ArmPkg/Drivers/ArmScmiDxe/ArmScmiBaseProtocolPrivate.h]
[ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h]
are existing in module
ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
but are not described in INF the file.
The patch also re-orders the files in the
[Sources.common] section.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Module file has FILE_GUID collision with other
module file
The two .inf files with clashing GUID are:
ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
As ArmMmuBaseLib.inf is older than ArmMmuStandaloneMmLib.inf,
it has precedence.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
There should be no unnecessary inclusion of library
classes in the INF file
This comes with the additional information:
The Library Class [BootLogoLib]
is not used in any platform
The Library Class [DxeServicesLib]
is not used in any platform
The Library Class [UefiBootManagerLib]
is not used in any platform
The Library Class [PeCoffExtraActionLib]
is not used in any platform
ArmPkg/ArmPkg.dsc builds the modules requiring thses libraries,
but doesn't build the required libraries. This patch adds
the missing libraries to the [LibraryClasses.common] section.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only Doxygen commands '@bug', '@todo', '@example', '@file',
'@attention', '@param', '@post', '@pre', '@retval', '@return',
'@sa', '@since', '@test', '@note', '@par', '@endcode', '@code',
'@{', '@}' are allowed to mark the code
This patch removes the ":" character following the "@param"
doxygen command.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used for #define
declarations
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used
for #define declarations
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used
for #define declarations
Edk2 coding standard stating that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used."
the include guard of ArmCortexA5x.h is also updated.
Ref:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
5_source_files/53_include_files#
5-3-5-all-include-file-contents-must-be-protected-by-a-include-guard
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify two macros to put "offset" in parentheses and remove
parentheses from "4 * offset".
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The following patches added support for StandaloneMM using FF-A:
9da5ee116a ArmPkg: Allow FF-A calls to set memory region's attributes
0e43e02b9b ArmPkg: Allow FF-A calls to get memory region's attributes
However, in the error handling logic for the Get/Set Memory attributes,
the CLANG compiler reports that a status variable could be used without
initialisation. This issue is a false positive and is not seen with GCC.
The Get/Set Memory attributes operation is atomic and therefore an
FFA_INTERRUPT or FFA_SUCCESS response is not expected in response
to FFA_MSG_SEND_DIRECT_REQ. So the remaining cases that could occur
are:
- the target sends FFA_MSG_SEND_DIRECT_RESP with a success or
failure code.
or
- FFA_MSG_SEND_DIRECT_REQ transmission failure.
Therefore,
- reorder the error handling conditions such that it prevents the
uninitialised variable issue being flagged by CLANG.
- move the repetitive code to a static helper function and add
documentation at the appropriate places.
- fix error handling in functions that invoke GetMemoryPermissions().
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Allow setting memory region's permissions using either of the Firmware
Framework(FF-A) ABI transport or through the earlier used SVC calls.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Allow getting memory region's permissions using either of the Firmware
Framework(FF-A) ABI transport or through the earlier used SVC calls.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add the FF-A header for invoking the mmu functions using FF-A calls as
the transport mechanism. Support for invoking the functions through
FF-A will be added in a subsequent patch.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Declare the values of SPM major and minor versions as macros with FF-A
enabled, which can be used in the module for checking the SPM version
compatibility. These SPM major and minor version numbers are mandated
for having support for the Firmware Framework(FF-A) feature enabled.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Declare the values of SPM major and minor versions as macros which can
be used in the module for checking the SPM version compatibility.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
The Secure Partition(SP) can request services from the Secure
Partition Manager Core(SPMC) either through FF-A calls or through the
existing SVC calls. Add a feature flag Pcd for enabling the FF-A
method -- when this is set to FALSE, the SP uses the existing SVC
calls for making the requests.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
