Clang 3.8 is a very old release and is no longer relevant. Delete the
CLANG38 toolchain from tools_def.template.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Clang 3.5 is a very old release and is no longer relevant. Remove the
CLANG35 toolchain from tools_def.template.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
As with the IA32 and X64 CLANGDWARF toolchain definitions, use ld.lld
for ARM and AARCH64.
Add -Wl,--no-pie,--no-relax to the command line to fix linking when
using lld.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Add a 'GCC' toolchain that's a copy of the existing GCC5 definition.
Add a 'GCCNOLTO' toolchain that's a copy of the existing GCC49
toolchain.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Update the Visual Studio toolchain descriptions in
tools_def.txt.template:
- The WinDDK is no longer needed.
- Update 3 is required for VS 2015.
- VS 2005 has been removed.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The edk2-stable202302 release was the last to support building
EFI Byte Code drivers. Since the Intel EFI Byte Code Compiler is no
longer available, a decision has been made to remove support for EBC
from edk2.
Remove the definitions for Intel's EBC compiler from
Conf/tools_def.template.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
With recent changes, Visual Studio versions older than VS2015 are
unable to build EDK2 code.
To avoid confusion, remove VS2008, 2010, 2012 and 2013 toolchain
definitions from Conf/tools_def.template, leaving only versions that can
be used to successfully build firmware.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Add quotes around the OBJCOPY command in build_rule.template to fix the
case where LLVM is installed on Windows in a path with spaces such as
C:\Program Files\LLVM.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
We rely on PIE executables to get the codegen that is suitable for
PE/COFF conversion where the resulting executables can be loaded
anywhere in the address space.
However, ELF linkers may default to disallowing text relocations in PIE
executables, as this would require text segments to be updated at
runtime, which is bad for security and increases the copy-on-write
footprint of ELF executables and shared libraries.
However, none of those concerns apply to PE/COFF executables in the
context of EFI, which are copied into memory rather than mmap()'ed, and
fixed up by the loader before launch.
So pass -z notext to the LLD linker to permit runtime relocations in
read-only sections.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
The clang toolchain might default to fPIE/fPIC, which prevents
lld from linking the objects into a binary.
Specify -fno-pie -fno-pic as done on GCC to fix linking.
Test:
Building the Universal Payload using the command
'python UefiPayloadPkg/UniversalPayloadBuild.py -a IA32' actually
works.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=4356
The ELF based toolchains use objcopy to create HII object files, which
contain only a single .hii section. This means no GNU note is inserted
that describes the object as compatible with BTI, even though the lack
of executable code in such an object makes the distinction irrelevant.
However, the linker will not add the note globally to the resulting ELF
executable, and this breaks BTI compatibility.
So let's insert a GNU BTI-compatible ELF note by hand when generating
such object files.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2928
commit 17bd834eb5 ("BaseTools: Factorize GCC flags")
makes GCC48_ALL_CC_FLAGS inherit from GCC_ALL_CC_FLAGS.
GCC_ALL_CC_FLAGS contains the '-Os' flag.
The latest flag in a command line overrides the previous
optimization option. This allows more specific build
configuration to override the inherited '-Os' flag.
If a build configuration includes GCC48_ALL_CC_FLAGS,
hard-coded '-Os' options are not necessary anymore.
Remove them.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Even though the presence of the 'packed' pragma should be a strong hint
that the misaligned placement of a GUID in a struct is intentional,
recent Clang versions will object nonetheless, and break the build due
to the presence of such GUIDs in the FPDT ACPI tables.
This is obviously not something we can fix in the code, so let's just
suppress the warning/error instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Recent GCC for ARM will complain when selecting the hard float ABI
without specifying the FPU implementation, even when just running the
preprocessor.
This all happens under the hood, and we never bothered in the past,
given that we don't emit floating point code anyway. However, to placate
newer compilers, make it explicit that the floating point ABI is always the
softfloat one, by moving the -msoft-float compiler option to
PLATFORM_FLAGS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
ARCHCC_FLAGS and ARCHASM_FLAGS no longer serve a useful purpose so drop
all the definitions and references.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The global GCC_PP_FLAGS tools_def variable now contains a reference to
OpenSBI specific C preprocessor variables, which means they are added to
the command line on every architecture, not just RISC-V.
This does not currently result in any issues, but it is a bit sloppy so
let's clean this up. Given that the GCC_PP_FLAGS definition appears
twice, drop the one that carries the OpenSBI reference, and move that
reference to a new RISC-V specific variable.
Acked-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
EDKII build system supports OptionROM generation if particular PCI_*
defines are present in the module INF file:
```
[Defines]
...
PCI_VENDOR_ID = <...>
PCI_DEVICE_ID = <...>
PCI_CLASS_CODE = <...>
PCI_REVISION = <...>
```
Although after the commit d372ab585a
("BaseTools/Conf: Fix Dynamic-Library-File template") it is no longer
possible.
The build system fails with the error:
```
Cyclic dependency detected while generating rule for
"<...>/DEBUG/<...>.efi" file
```
Remove "$(DEBUG_DIR)(+)$(MODULE_NAME).efi" from the 'dll' output files
to fix the cyclic dependency.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Prior to this change, deps were not generated for Arm and AARCH64
libraries when MODULE_TYPE was BASE, SEC, PEI_CORE, or PIEM. That
resulted in bad incremental builds.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Fixes problems due to code assuming it runs with frame pointers and thus
updates rbp / ebp registers when switching stacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Liming Gao <gaoliming@byosoft.com.cn>
Fix gcc: warning:
-x c after last input file has no effect
These kind of flag can only affect the source code after them.
For the build command in build_rule.template, we have no other source code or object after these two flag.
It seems we don't need them here.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: JessyX Wu <jessyx.wu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This reverts commit ff36b2550f.
Has no effect because GCC_IA32_CC_FLAGS and GCC_X64_CC_FLAGS are unused.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The ebp/rbp register can either be used for the frame pointer or
as general purpose register. With gcc (and clang) this depends
on the -f(no-)omit-frame-pointer switch.
This patch updates tools_def.template to explicitly set the compiler
option and also add a define to allow conditionally compile code.
The new define is used to fix stack switching in TemporaryRamMigration.
The ebp/rbp must not be touched when the compiler can use it as general
purpose register. With version 12 gcc starts actually using the
register, so changing it leads to firmware crashes in some
configurations.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3934
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
In the Dynamic-Library-File template, add missing output file
declarations. These files are generated by the template and other rules
explicitly depend on them.
This change resolves missing dependency issues we encountered while
running a recursive make with job control.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Building with the CLANG35 and CLANG38 toolset fails because of variables
which are set but not otherwise used in the RELEASE build.
GCC added -Wno-unused-but-set-variable back in 2016, and later added
-Wno-unused-const-variable. Add those to CLANG35_WARNING_OVERRIDES and
CLANG38_WARNING_OVERRIDES.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1603
LLVM/CLANG8 formal release http://releases.llvm.org/download.html#8.0.0
It can be downloaded and installed in Windows/Linux/Mac OS.
CLANG8ELF tool chain is added to generate ELF image, and convert to PE/COFF.
On Windows OS, set CLANG_HOST_BIN=n, set CLANG8_BIN=LLVM installed directory
For example:
set CLANG_HOST_BIN=n # use windows nmake
set CLANG8_BIN=C:\Program Files\LLVM\bin\
On Linux/Mac, set CLANG8_BIN=LLVM installed directory
This tool chain can be used to compile the firmware code. On windows OS,
Visual Studio is still required to compile BaseTools C tools and nmake.exe.
On Linux/Mac OS, gcc is used to compile BaseTools C tools. make is used
for makefile.
This tool chain is verified on OVMF Ia32, X64 and Ia32X64 to boot Shell.
This tool chain is verified in Windows/Linux and Mac OS.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
LLVM/CLANG doesn't support resource section generation when ELF image generated.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
GCC48_ALL_CC_FLAGS has no dependency on GCC_ALL_CC_FLAGS.
By definition, there should be such dependency.
The outcomes of this patch is that GCC48_ALL_CC_FLAGS and
other dependent configurations will inherit from the
additional "-Os" flag.
The "-Os" flag optimizes a build in size, not breaking any
build. In a gcc command line, the last optimization flag
has precedence. This means that this "-Os" flag will be
overriden by a more specific optimization configuration,
provided that this more specific flag is appended at the
end of the CC_FLAGS.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
By default, gcc allows void* pointer arithmetic.
This is a GCC extension.
However:
- the C reference manual states that void*
pointer "cannot be operands of addition
or subtraction operators". Cf s5.3.1
"Generic Pointers";
- Visual studio compiler treat such operation as
an error.
To prevent such pointer arithmetic, the "-Wpointer-arith"
flag should be set for all GCC versions.
The "-Wpointer-arith" allows to:
"Warn about anything that depends on the "size of"
a function type or of void. GNU C assigns these
types a size of 1, for convenience in calculations
with void * pointers and pointers to functions."
This flag is available since GCC2.95.3 which came out in 2001.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
SetupGit.py sets the git config option diff.orderFile to
{edk2 directory}/BaseTools/Conf/diff.order, to override the default order
in which files are shown in a diff/patch/whatever. This is in imitation
of what is done manually in Laszlo's Unkempt Guide.
However, the version currently in the tree is in CRLF format, which makes
git interpret e.g. *.c as matching on *.c<CR>, finding no matches and
failing to apply the desired reordering. Note: this is true regardless of
whether running on Linux or Windows.
Convert the file to LF-only to make it work as expected.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The AmlToHex script and Posix/WindowsLike wrappers convert
an AML file to a .hex file, containing a C array storing
AML bytecode. This ".hex" file can then be included in a
C file, allowing to access the AML bytecode from this C
file.
The EDK2 build system doesn't allow to a depict dependency
orders between files of different languages. For instance,
in a module containing a ".c" file and a ".asl", the ".c"
file may or may not be built prior to the ".asl" file.
This prevents any inclusion of a generated ".hex" in a
".c" file since this later ".hex" file may or may not
have been created yet.
This patch modifies the AmlToC script to generate a C file
instead of a ".hex" file.
It also adds the generation of an intermediate ".amli" file
when compiling an ASL file, and adds a rule to convert this
".amli" to a C file.
This allows to generate a C file containing the AML bytecode
from an ASL file. This C file will then be handled by the EDK2
build system to generate an object file.
Thus, no file inclusion will be required anymore. The C file
requiring the AML bytecode as a C array, and the ASL file,
will be compiled independently. The C array must be defined
as an external symbol. The linker is resolving the
reference to the C array symbol.
To summarize, the flow goes as:
-1. ASL file is compiled to AML;
-2. AML file is copied to a ".amli" intermediate file;
-3. EDK2 build system applies the rule relevant to ".amli"
files. This is, calling the "AmlToC" script, generating
a C file from the ".amli" file;
-4. EDK2 build system applies the rule relevant to C files.
This is creating an object file.
-5. EDK2 build system links the object file containing the
AML bytecode with the object file requiring it.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
