NonDiscoverablePciDeviceDxe currently #defines the module-internal
PCI_MAX_BARS macro, with value 6 (and type "int").
Remove this private macro definition, and adopt PCI_MAX_BAR from
"MdePkg/Include/IndustryStandard/Pci22.h". Both the value and the type
remain unchanged (the standard PCI_MAX_BAR macro expands to 0x0006).
"NonDiscoverablePciDeviceIo.h" gets the definition of PCI_MAX_BAR via its
existent #include <IndustryStandard/Pci.h> directive.
Build-tested only.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200409113017.18233-1-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
ASSERT in PollMem_Conf, CopyMem_Conf, SetBarAttributes_Conf
Conformance Test.
SCT Test expect return as Invalid Parameter or Unsupported.
Added Checks for Function Parameters.
return Invalid or Unsupported if Check fails.
Added Checks in PciIoPollIo(), PciIoIoRead()
PciIoIoWrite()
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
SdMmcPciHcDxe driver used to read response only after
command and data transfer completed. According to SDHCI
specification response data is ready after the command
complete status is set by the host controller. Getting
the response data early will help debugging the cases
when command completed but data transfer timed out.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
To allow for easier debug of failing commands we
have added a capability to print TRB and command
packet when we start execution of the TRB(on
DEBUG_VERBOSE level) and when the TRB failed to
execute correctly(on DEBUG_ERROR level). Additionally
we will also print error interrupt status and interrupt
status register on failed SD command.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1989
The commit will avoid unmapping the same resource in error handling logic
for function BuildAdmaDescTable() and SdMmcCreateTrb().
For the error handling in BuildAdmaDescTable():
The error is directly related with the corresponding Map() operation
(mapped address beyond 4G, which is not supported in ADMA), so the Unmap()
operation is done in the error handling logic, and then setting
'Trb->AdmaMap' to NULL to avoid double Unmap.
For the error handling in SdMmcCreateTrb():
The error is not directly related with the corresponding Map() operation,
so the commit will update the code to left SdMmcFreeTrb() for the Unmap
operation to avoid double Unmap.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Changed @rtval to @retval in SdMmcHcStartSdClock
function description.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: GuoMinJ <newexplorerj@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Test: detachable keyboard on Google Pixel Slate now works.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: GuoMinJ <newexplorerj@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
For eMMC modules we used to notify the platform about frequency
change only after sending CMD13 which meant that platform
might not get a chance to apply required post frequency
change fixes to get the clock stable. To fix this
notification has been moved to SdMmcHcClockSupply function
just after we start the SD clock. During first time setup
the notification won't be sent to avoid changing old behavior.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2118
When a packet is queued/completed for the asynchronous IO queue, the logic
to roll over to the front of the queue doesn't account for actual size of
the IO Submission/Completion queue.
This causes a device to hang due to doorbell being outside of visible
queue. An example would be if an NVMe drive only supported a queue size of
128 while the driver supports 256.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2303
Whenever a PCI device is discovered, PCI bus calls the
EDKII_DEVICE_SECURITY_PROTOCOL to authenticate it.
If the function returns success, the PCI bus allocates
the resource and installs the PCI_IO for the device.
If the function returns fail, the PCI bus skips the device.
It is similar to EFI_SECURITY_ARCH_PROTOCOL, which
is used to verify an EFI image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Yun Lou <yun.lou@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
RequestMap is used but not Initialized.
RequestMap is called by UhciMapUserRequest, in which RequestMap(Map)
is called by IoMmuMap, and is finally called by IoMmu->Map.
We can not assume RequestMap is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Map is used but not Initialized.
Map is called by IoMmuMap, in which Mapping(Map) is called by IoMmu->Map.
We can not assume Map is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2312
This patch is for fixing unexpected system hang during S3 unlock process.
FatPei driver maintained and updated internal BlockIo devices list
when there is new BlockIo PPI has installed, and it relied on BlockIo PPI
service to get data from devices. Because BlockIo Ppi leverage
NvmExpressPei Ppi to transit Nvm command to device, we should make sure
NvmePassThruPpi installed before BlockIo PPI.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Add support for allocating aligned pages at an alignment higher
than 4K. The new function allocated memory taking into account
the padding required and then frees up unused pages before mapping
it.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
While allocating pages aligned at an alignment higher than
4K, allocate memory taking into consideration the padding
required for that alignment. The calls to free pages takes
care of this already.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are on error paths. Fix the UninstallMultipleProtocolInterfaces()
calls.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
There is a bug in current driver code that makes
it impossible for it to work with devices that
only work in legacy speed mode since the function
EmmcSwitchToHighSpeed will return with EFI_INVALID_PARAMETER
for such bus mode. Since the logic in that function will
work well for SdMmcMmcLegacy this patch just allows
to call this function with SdMmcMmcLegacy bus mode.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
