GetMaintainer.py already extracts the value of any S: tags for sections,
but it doesn't do anything with that information.
Print a warning message, with the status, for each matching section with
a status explicitly set to anything other than 'Supported' or
'Maintained'.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Allow users who didn't clone one of the TianoCore repos from a
canonical URL to specify the name of the repo (edk2, edk2-platforms
or edk2-non-osi) when running SetupGit.py to allow them to configure
their repo properly.
The new option is:
-n repo, --name repo set the repo name to configure for, if not
detected automatically
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
For Arm-based platforms, count the instances of installed tables for
each ACPI table listed as 'mandatory' in any Server Base Boot
Requirements (SBBR) specification.
Validate that the all the mandatory SBBR tables present. Report an error
for each missing table.
This new feature is optional and can be enabled with the -r command line
parameter.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For Arm-based platforms, define and implement an interface for Server
Base Boot Requirements (SBBR) compliance checks. The library is
responsible for validating that all mandatory ACPI tables are installed
on the platform.
Internally, the library maintains a data structure which tracks
instance counts for ACPI tables which are labeled as 'mandatory' in any
SBBR specification version. The provided interface allows:
- resetting all instance counts to 0
- incremementing the instance count for a table with a given signature
- validating the instance counts against the requirements in SBBR
The ACPI table requirements for each SBBR spec version are represented
internally as a list of table signatures.
Every missing mandatory table (for the input SBBR version) is reported
to the user as a separate error. If all requirements are met, an info
message is displayed.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Define a new command line parameter '-r' to enable checking if all
mandatory ACPI tables listed in a specification are present.
The -r parameter takes an integer value to specify which specification
the validation should be performed against.
The parameter is used to set two Acpiview variables. An interface to
access these variables is implemented in this patch.
The new functionality is aimed at Arm-based platforms, however,
there are no restriction on extending it to other architectures.
For the 32-bit and 64-bit Arm architectures, the possible values for
the -r parameter are:
0: Arm Server Base Boot Requirements 1.0, March 2016
1: Arm Server Base Boot Requirements 1.1, May 2018
2: Arm Server Base Boot Requirements 1.2, September 2019
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Some driver were recently moved to edk2-platforms, but the DSC file
in EmbeddedPkg still refers to them. Drop these references.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The controller supports up to 8 targets in practice (Not reported by the
controller, but based on the implementation of the virtual device),
report them in GetNextTarget and GetNextTargetLun. The firmware will
then try to communicate with them and create a block device for each one
that responds.
Support for multiple LUNs will be implemented in another series.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200504210607.144434-7-nikita.leshchenko@oracle.com>
The PL180 SD host controller driver is only used on emulated ARM
platforms, uses an obsolete version of the MMC host protocol and
does not adhere to the UEFI driver model.
It has been moved into edk2-platforms alongside the only platforms
that use it, so we can drop it from the EDK2 core repository.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The ISP 1716 USB host controller driver does not implement the UEFI
driver model, and is not a suitable example for new drivers to be
based on. Also, it is currently only used on a limited set of ARM
development platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The SiI3132 SATA controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Lan9118 network controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Lan91x network controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Synopsys DesignWare eMMC host controller driver does not implement
that SD/MMC host controller protocol that the UEFI spec defines, but an
obsolete EDK2-specific one that predates it. It also does not implement
the UEFI driver model.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
