REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3126
1. If use PeiDxeDebugLibReportStatusCode as DebugLib, then some logs
after ExitBootService() will be lost.
2. The root cause:
2.1 The original code will register an unregister function
of gEfiEventExitBootServicesGuid, this unregister function will call
EFI_RSC_HANDLER_PROTOCOL->Unregister and does not support log through
serial port.
2.2 And some other drivers also register call back funtions of
gEfiEventExitBootServicesGuid.
2.3 Then after the unregister function is called, other call back
functions can't out log if them use RSC as DebugLib.
3. The DxeMain will report status code EFI_SW_BS_PC_EXIT_BOOT_SERVICES
after notify all the call back functions of
gEfiEventExitBootServicesGuid.
4. Solution: the StatusCodeHandlerRuntimeDxe.c will not register an
unregister function of gEfiEventExitBootServicesGuid, but unregister it
after receive the status code of EFI_SW_BS_PC_EXIT_BOOT_SERVICES.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ming Tan <ming.tan@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The Ecc tool currently reports the initialization of variables
at declaraton if the variable is non-constant and declared
in a function. Static variables locally defined in functions
should also be allowed to be initialized at declaration.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The ECC tool crashes if a C file has an incorrect file header
format.
The file ArmPkg\Library\ArmMmuLib\AArch64\ArmMmuPeiLibConstructor.c
has a file header in the incorrect format. It uses # to mark the
header comments instead of enclosing the file header in /* */. This
may have been a result of an INF file header being copied to a C
file.
A separate patch fixes the C file but ECC tool should
not crash if a file with an incorrect header is found.
Therefore, update the ECC tool to prevent it from crashing if an
incorrect file header is found. With this change the ECC tool will
report the incorrect header issue without crashing.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The EFI_FILE_PROTOCOL.SetInfo() member is somewhat under-specified; one of
its modes of operation is renaming/moving the file.
In order to create the destination pathname in canonical format, 2*2=4
cases have to be considered. For the sake of discussion, assume the
current canonical pathname of a VIRTIO_FS_FILE is "/home/user/f1.txt".
Then, consider the following rename/move requests from
EFI_FILE_PROTOCOL.SetInfo():
Destination requested Destination Move into Destination in
by SetInfo() relative? directory? canonical format
--------------------- ----------- ---------- -----------------------
L"\\dir\\f2.txt" no no "/dir/f2.txt"
L"\\dir\\" no yes "/dir/f1.txt"
L"dir\\f2.txt" yes no "/home/user/dir/f2.txt"
L"dir\\" yes yes "/home/user/dir/f1.txt"
Add the VirtioFsComposeRenameDestination() function, for composing the
last column from the current canonical pathname and the SetInfo() input.
The function works on the following principles:
- The prefix of the destination path is "/", if the SetInfo() rename
request is absolute.
Otherwise, the dest prefix is the "current directory" (the most specific
parent directory) of the original pathname (in the above example,
"/home/user").
- The suffix of the destination path is precisely the SetInfo() request
string, if the "move into directory" convenience format -- the trailing
backslash -- is not used. (In the above example, L"\\dir\\f2.txt" and
L"dir\\f2.txt".)
Otherwise, the suffix is the SetInfo() request, plus the original
basename (in the above example, L"\\dir\\f1.txt" and L"dir\\f1.txt").
- The complete destination is created by fusing the dest prefix and the
dest suffix, using the VirtioFsAppendPath() function.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-43-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
For reading through a directory stream with tolerable performance, we'll
have to call FUSE_READDIRPLUS each time with such a buffer that can
deliver a good number of variable size records
(VIRTIO_FS_FUSE_DIRENTPLUS_RESPONSE elements). Every time we'll do that,
we'll turn the whole bunch into an array of EFI_FILE_INFOs immediately.
EFI_FILE_PROTOCOL.Read() invocations (on directories) will be served from
this EFI_FILE_INFO cache.
Add the fields for the EFI_FILE_INFO cache to VIRTIO_FS_FILE:
- initialize them in Open() and OpenVolume(),
- release the cache in Close() and Delete(),
- also release the cache when the directory is rewound, in SetPosition().
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-36-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add the VirtioFsFuseReadFileOrDir() function, for sending the FUSE_READ or
FUSE_READDIRPLUS command to the Virtio Filesystem device.
Parsing the structured FUSE_READDIRPLUS output is complex, and cannot be
integrated into the wrapper function. Given that fact, FUSE_READ and
FUSE_READDIRPLUS turn out to need identical low-level handling, except for
the opcode. Hence the shared wrapper function.
(It's prudent to verify whether the FUSE server supports FUSE_READDIRPLUS,
so update the session init code accordingly.)
This is the first FUSE request wrapper function that deals with a variable
size tail buffer.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-33-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VirtioFsFuseAttrToEfiFileInfo() function, for converting
FUSE inode attributes to EFI_FILE_INFO.
The EpochToEfiTime() function from EmbeddedPkg's TimeBaseLib proves
invaluable for converting the file access times.
This is the first time we consume TimeBaseLib in OvmfPkg, so add the
necessary lib class resolution. We need not modify any ArmVirtPkg DSC
files: see commit af5fed90bf ("ArmPlatformPkg,ArmVirtPkg: delete
redundant PL031 functions", 2017-05-10).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-22-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
EFI_FILE_PROTOCOL.Open() -- for opening files -- and
EFI_FILE_PROTOCOL.SetInfo() -- for renaming files -- will require us to
append a relative UEFI pathname to an absolute base pathname. In turn,
components of the resultant pathnames will have to be sent to virtiofsd,
which does not consume UEFI-style pathnames.
We're going to maintain the base pathnames in canonical POSIX format:
- absolute (starts with "/"),
- dot (.) and dot-dot (..) components resolved/removed,
- uses forward slashes,
- sequences of slashes collapsed,
- printable ASCII character set,
- CHAR8 encoding,
- no trailing slash except for the root directory itself,
- length at most VIRTIO_FS_MAX_PATHNAME_LENGTH.
Add a helper function that can append a UEFI pathname to such a base
pathname, and produce the result in conformance with the same invariants.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-17-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The two member functions that free the EFI_FILE_PROTOCOL object are
Close() and Delete(). Before we create VIRTIO_FS_FILE objects with
EFI_FILE_PROTOCOL.Open() later in this patch series, extend each of these
"destructor" functions to get rid of the FuseHandle and NodeId resources
properly -- in a way that matches each function's own purpose.
For the time being, VirtioFsSimpleFileDelete() only gets a reminder about
its core task (namely, removing the file), as the needed machinery will
become only later. But we can already outline the "task list", and deal
with the FuseHandle and NodeId resources. The "task list" of
VirtioFsSimpleFileDelete() is different from that of
VirtioFsSimpleFileClose(), thus both destructors diverge at this point.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-16-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
