Both ACPI shutdown and ACPI PM timer devices has been moved to different
port addresses in the latest version of Cloud Hypervisor. These changes
need to be reflected on the OVMF firmware.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of hardcoding the address of the RSDP in the firmware, let's
rely on the PVH structure hvm_start_info to retrieve this information.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add defines for the config space offsets for virtio 1.0 mmio transport.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add logic in EjectCpu() to do the actual the CPU ejection.
On the BSP, ejection happens by first selecting the CPU via
its QemuSelector and then sending the QEMU "eject" command.
QEMU in-turn signals the remote VCPU thread which context-switches
the CPU out of the SMI handler.
Meanwhile the CPU being ejected, waits around in its holding
area until it is context-switched out. Note that it is possible
that a slow CPU gets ejected before it reaches the wait loop.
However, this would never happen before it has executed the
"AllCpusInSync" loop in SmiRendezvous().
It can mean that an ejected CPU does not execute code after
that point but given that the CPU state will be destroyed by
QEMU, the missed cleanup is no great loss.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-10-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: unneeded inner QemuSelector declaration in EjectCpu()
triggers VS warning #4456 (local variable shadowed); remove it]
Add the VirtioFsFuseReadFileOrDir() function, for sending the FUSE_READ or
FUSE_READDIRPLUS command to the Virtio Filesystem device.
Parsing the structured FUSE_READDIRPLUS output is complex, and cannot be
integrated into the wrapper function. Given that fact, FUSE_READ and
FUSE_READDIRPLUS turn out to need identical low-level handling, except for
the opcode. Hence the shared wrapper function.
(It's prudent to verify whether the FUSE server supports FUSE_READDIRPLUS,
so update the session init code accordingly.)
This is the first FUSE request wrapper function that deals with a variable
size tail buffer.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-33-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VirtioFsFuseAttrToEfiFileInfo() function, for converting
FUSE inode attributes to EFI_FILE_INFO.
The EpochToEfiTime() function from EmbeddedPkg's TimeBaseLib proves
invaluable for converting the file access times.
This is the first time we consume TimeBaseLib in OvmfPkg, so add the
necessary lib class resolution. We need not modify any ArmVirtPkg DSC
files: see commit af5fed90bf ("ArmPlatformPkg,ArmVirtPkg: delete
redundant PL031 functions", 2017-05-10).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-22-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
With the help of the VirtioFsFuseOpenDir() and
VirtioFsFuseReleaseFileOrDir() functions introduced previously, we can now
open and close the root directory. So let's implement
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.OpenVolume().
OpenVolume() creates a new EFI_FILE_PROTOCOL object -- a reference to the
root directory of the filesystem. Thus, we have to start tracking
references to EFI_SIMPLE_FILE_SYSTEM_PROTOCOL, lest we unbind the
virtio-fs device while files are open.
There are two methods that release an EFI_FILE_PROTOCOL object: the
Close() and the Delete() member functions. In particular, they are not
allowed to fail with regard to resource management -- they must release
resources unconditionally. Thus, for rolling back the resource accounting
that we do in EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.OpenVolume(), we have to
implement the first versions of EFI_FILE_PROTOCOL.Close() and
EFI_FILE_PROTOCOL.Delete() in this patch as well.
With this patch applied, the UEFI shell can enter the root directory of
the Virtio Filesystem (such as with the "FS3:" shell command), and the
"DIR" shell command exercises FUSE_OPENDIR and FUSE_RELEASEDIR, according
to the virtiofsd log. The "DIR" command reports the root directory as if
it were empty; probably because at this time, we only allow the shell to
open and to close the root directory, but not to read it.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-12-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VIRTIO_FS_FUSE_REQUEST and VIRTIO_FS_FUSE_RESPONSE
structures, which are the common headers for the various FUSE
request/response structures.
Introduce the VirtioFsFuseNewRequest() helper function for populating
VIRTIO_FS_FUSE_REQUEST, from parameters and from a VIRTIO_FS-level request
counter.
Introduce the VirtioFsFuseCheckResponse() helper function for verifying
most FUSE response types that begin with the VIRTIO_FS_FUSE_RESPONSE
header.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-7-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add the VirtioFsInit(), VirtioFsUninit(), and VirtioFsExitBoot()
functions.
In VirtioFsInit():
- Verify the host-side config of the virtio-fs device.
- Save the filesystem label ("tag") for later, from the configuration area
of the virtio-fs device.
- Save the virtio queue size for later as well.
- Set up the virtio ring for sending requests.
In VirtioFsUninit():
- Reset the device.
- Tear down the virtio ring.
In VirtioFsExitBoot():
- Reset the device.
With this patch, the UEFI connect / disconnect controller operations
involve virtio setup / teardown; they are visible in the virtio-fs
daemon's log file. The virtiofsd log also confirms the device reset in
VirtioFsExitBoot(), when an OS is booted while the virtio-fs device is
bound.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-5-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Complete the Supported, Start, and Stop member functions of
EFI_DRIVER_BINDING_PROTOCOL sufficiently for exercising the UEFI driver
model:
- bind virtio-fs devices,
- produce placeholder EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instances on them.
On the "TO_START" (= Virtio) side, the VirtioFsBindingSupported() function
verifies the Virtio subsystem ID for the virtio-fs device (decimal 26 --
see
<https://github.com/oasis-tcs/virtio-spec/blob/87fa6b5d8155/virtio-fs.tex>).
Beyond that, no actual Virtio setup is performed for now. Those bits are
going to be implemented later in this series.
On the "BY_START" (= UEFI filesystem) side, the VirtioFsOpenVolume()
function -- which is the sole EFI_SIMPLE_FILE_SYSTEM_PROTOCOL member
function -- is a stub; it always returns EFI_NO_MEDIA, for now.
The "CONNECT", "DISCONNECT", and "MAP -R" UEFI Shell commands can be used
to test this patch.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a IOIO_PROT intercept generates a #VC exception. VMGEXIT
must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a IOIO_PROT
NAE event. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXITINFO1 value in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
This is the second part of LsiScsiPassThru(). LsiScsiProcessRequest() is
added to translate the SCSI Request Packet into the LSI 53C895A
commands. This function utilizes the so-called Script buffer to transmit
a series of commands to the chip and then polls the DMA Status (DSTAT)
register until the Scripts Interrupt Instruction Received (SIR) bit
sets. Once the script is done, the SCSI Request Packet will be modified
to reflect the result of the script. The Cumulative SCSI Byte Count
(CSBC) register is fetched before and after the script to calculate the
transferred bytes and update InTransferLength/OutTransferLength if
necessary.
v3:
- Set DStat, SIst0, and SIst1 to 0 before using them
- Amend the if statements for the DMA data instruction and add the
assertions for the data direction
- Also set SenseDataLength to 0 on the error path
- Fix typos and amend comments
- Amend the error handling of the calculation of transferred bytes
v2:
- Use the BITx macros for the most of LSI_* constants
- Fix a typo: contorller => controller
- Add SeaBIOS lsi-scsi driver as one of the references of the script
- Cast the result of sizeof to UINT32 for the instructions of the
script
- Drop the backslashes
- Replace LSI_SCSI_DMA_ADDR_LOW with LSI_SCSI_DMA_ADDR since we
already removed DUAL_ADDRESS_CYCLE
- Add more comments for the script
- Fix the check of the script size at the end of the script
- Always set SenseDataLength to 0 to avoid the caller to access
SenseData
- Improve the error handling in LsiScsiProcessRequest()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-11-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Open PciIo protocol and use it to initialize the device. The
initialization of LSI 53C895A is simple: just set the SRST bit in
Interrupt Status Zero register to reset the device.
v2:
- Use the BITx macros for the bit constants
- Add the closing of PciIo protocol in LsiScsiControllerStop()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-8-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
