BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The initial page built during the SEC phase is used by the
MemEncryptSevSnpValidateSystemRam() for the system RAM validation. The
page validation process requires using the PVALIDATE instruction; the
instruction accepts a virtual address of the memory region that needs
to be validated. If hardware encounters a page table walk failure (due
to page-not-present) then it raises #GP.
The initial page table built in SEC phase address up to 4GB. Add an
internal function to extend the page table to cover > 4GB. The function
builds 1GB entries in the page table for access > 4GB. This will provide
the support to call PVALIDATE instruction for the virtual address >
4GB in PEI phase.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide the hardware isolated
abstraction layers with a VM. The VMPL0 is the highest privilege, and
VMPL3 is the least privilege. Certain operations must be done by the
VMPL0 software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SEV-SNP support assumes that the guest is running on VMPL0.
Let's add function in the MemEncryptSevLib that can be used for checking
whether guest is booted under the VMPL0.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The guest can request the
hypervisor to add pages in the RMP table via the Page State Change VMGEXIT
defined in the GHCB specification section 2.5.1 and 4.1.6. Inside each RMP
entry is a Validated flag; this flag is automatically cleared to 0 by the
CPU hardware when a new RMP entry is created for a guest. Each VM page
can be either validated or invalidated, as indicated by the Validated
flag in the RMP entry. Memory access to a private page that is not
validated generates a #VC. A VM can use the PVALIDATE instruction to
validate the private page before using it.
During the guest creation, the boot ROM memory is pre-validated by the
AMD-SEV firmware. The MemEncryptSevSnpValidateSystemRam() can be called
during the SEC and PEI phase to validate the detected system RAM.
One of the fields in the Page State Change NAE is the RMP page size. The
page size input parameter indicates that either a 4KB or 2MB page should
be used while adding the RMP entry. During the validation, when possible,
the MemEncryptSevSnpValidateSystemRam() will use the 2MB entry. A
hypervisor backing the memory may choose to use the different page size
in the RMP entry. In those cases, the PVALIDATE instruction should return
SIZEMISMATCH. If a SIZEMISMATCH is detected, then validate all 512-pages
constituting a 2MB region.
Upon completion, the PVALIDATE instruction sets the rFLAGS.CF to 0 if
instruction changed the RMP entry and to 1 if the instruction did not
change the RMP entry. The rFlags.CF will be 1 only when a memory region
is already validated. We should not double validate a memory
as it could lead to a security compromise. If double validation is
detected, terminate the boot.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
SEV-SNP firmware allows a special guest page to be populated with
guest CPUID values so that they can be validated against supported
host features before being loaded into encrypted guest memory to be
used instead of hypervisor-provided values [1].
Add handling for this in the CPUID #VC handler and use it whenever
SEV-SNP is enabled. To do so, existing CPUID handling via VmgExit is
moved to a helper, GetCpuidHyp(), and a new helper that uses the CPUID
page to do the lookup, GetCpuidFw(), is used instead when SNP is
enabled. For cases where SNP CPUID lookups still rely on fetching
specific CPUID fields from hypervisor, GetCpuidHyp() is used there as
well.
[1]: SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Microvm has no LPC bridge, so drop the PciSioSerialDxe driver.
Use SerialDxe instead, with ioport hardcoded to 0x3f8 aka com1 aka ttyS0.
With this tianocore boots to uefi shell prompt on the serial console.
Direct kernel boot can be used too.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Activate the default console when user interaction is required for
the processing of TPM 2 physical presence interface opcodes.
Background:
TPM 2 physical presence interface (PPI) opcodes need to be handled before
the TPM 2 platform hierarchy is disabled. Due to this requirement we will
move the function call to handle the PPI opcodes into
PlatformBootManagerBeforeConsole() which runs before the initialization
of the consoles. However, since for interaction with the user we need
the console to be available, activate it now before displaying any message
to the user.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Now with everything in place for virtio 1.0 devices we can let
VirtioMmioInit() return SUCCESS.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Use QueueNumMax as QueueNum default for drivers which do not
explicitly call VIRTIO_DEVICE_PROTOCOL->SetQueueSize().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Virtio 1.0 allows a more flexible virtio ring layout, so we have to set
addresses for descriptors avail flags and use flags separately. We
continue to use a ring layout compatible with virtio 0.9.5 though, so no
other changes are needed to setup the virtio queues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add #defines for the Version field. Read and store the version,
log the version found as info message.
Continue to return UNSUPPORTED for now, we need some more patches
to complete virtio 1.0 support first.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The "OvmfPkg/Library/PciHostBridgeLibScan/PciHostBridgeLibScan.inf"
instance is used in the following platforms in edk2:
OvmfPkg/Bhyve/BhyveX64.dsc
OvmfPkg/OvmfXen.dsc
Both platforms define "PcdPciDisableBusEnumeration" with Fixed-at-Build
access method, and TRUE value. Remove the PCD from the
PciHostBridgeLibScan instance, and everything else that is useful only
when the PCD is FALSE.
In practice, this removes the PciHostBridgeUtilityGetRootBridges()
function call, which is based on fw-cfg; see
"OvmfPkg/Library/PciHostBridgeUtilityLib/PciHostBridgeUtilityLib.c".
(Note that the dependency on PciHostBridgeUtilityLib remains in place,
given that the PciHostBridgeLibScan instance continues using lower-level
functions from the library that do not depend on fw-cfg.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-34-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf" instance is
used by the following platforms in edk2:
OvmfPkg/AmdSev/AmdSevX64.dsc
OvmfPkg/OvmfPkgIa32.dsc
OvmfPkg/OvmfPkgIa32X64.dsc
OvmfPkg/OvmfPkgX64.dsc
All these platforms statically inherit PcdPciDisableBusEnumeration=FALSE
from "MdeModulePkg.dec". Remove the the PCD and everything that depends on
it from the PciHostBridgeLib instance. Namely, remove the logic that
determines the root bridge apertures by (a) scanning the entire bus,
device and function number space, and (b) parsing the BAR values that were
pre-set by the Bhyve or Xen machinery.
"XenSupport.c" used to be listed explicitly in "Maintainers.txt", remove
it from that spot too.
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-33-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
This error was found while compiling VirtioMmioDeviceLib for X64
with the GCC5 toolchain, where EFIAPI makes a difference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210602045935.762211-1-kraxel@redhat.com>
[lersek@redhat.com: prepend module name to subject, trim subject back to
allowed length]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The CommandLine and InitrdData may be set to NULL if the provided
size is too large. Because the zero page is mapped, this would not
cause an immediate crash but can lead to memory corruption instead.
This patch just adds validation and returns error if either allocation
has failed.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Message-Id: <YFPJsaGzVWQxoEU4@martin-ThinkPad-T440p>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
[lersek@redhat.com: drop unnecessary empty line from code; remove personal
(hence likely unstable) repo reference from commit message]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
