BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
Add initial support for the new AmdSvsmLib library to OvmfPkg. The initial
implementation fully implements the library interfaces.
The SVSM presence check, AmdSvsmIsSvsmPresent(), determines the presence
of an SVSM by checking if an SVSM has been advertised in the SEV-SNP
Secrets Page.
The VMPL API, AmdSvsmSnpGetVmpl(), returns the VMPL level at which OVMF is
currently running.
The CAA API, AmdSvsmSnpGetCaa(), returns the Calling Area Address when an
SVSM is present, 0 otherwise.
The PVALIDATE API, AmdSvsmSnpPvalidate(), copies the PVALIDATE logic from
the BaseMemEncryptSevLib library for the initial implementation. The
BaseMemEncryptSevLib library will be changed to use this new API so that
the decision as to whether the SVSM is needed to perform the operation
can be isolated to this library.
The VMSA API, AmdSvsmSnpVmsaRmpAdjust(), copies the RMPUPDATE logic from
the MpInitLib library for the initial implementation. The MpInitLib
library will be changed to use this new API so that the decision as to
whether the SVSM is needed to perform the operation can be isolated to
this library.
Cc: Anatol Belski <anbelski@linux.microsoft.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jianyong Wu <jianyong.wu@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The SVSM specification relies on a specific register calling convention to
hold the parameters that are associated with the SVSM request. The SVSM is
invoked by requesting the hypervisor to run the VMPL0 VMSA of the guest
using the GHCB MSR Protocol or a GHCB NAE event.
Create a new version of the VMGEXIT instruction that will adhere to this
calling convention and load the SVSM function arguments into the proper
register before invoking the VMGEXIT instruction. On return, perform the
atomic exchange on the SVSM call pending value as specified in the SVSM
specification.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
When building the Page State Change entries for a range of memory, it can
happen that multiple calls to BuildPageStateBuffer() need to be made. If
the size of the input work area passed to BuildPageStateBuffer() exceeds
the number of entries that can be passed to the hypervisor using the GHCB
shared buffer, the Page State Change VMGEXIT support will issue multiple
VMGEXITs to process all entries in the buffer.
However, it could be that the final VMGEXIT for each round of Page State
Changes is only for a small number of entries and subsequent VMGEXITs may
still be issued to handle the full range of memory requested. To maximize
the number of entries processed during the Page State Change VMGEXIT,
limit BuildPageStateBuffer() to not build entries that exceed the maximum
number of entries that can be handled in a single Page State Change
VMGEXIT.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
In preparation for running under an SVSM at VMPL1 or higher (higher
numerically, lower privilege), re-organize the way a page state change
is performed in order to free up the GHCB for use by the SVSM support.
Currently, the page state change logic directly uses the GHCB shared
buffer to build the page state change structures. However, this will be
in conflict with the use of the GHCB should an SVSM call be required.
Instead, use a separate buffer (an area in the workarea during SEC and
an allocated page during PEI/DXE) to hold the page state change request
and only update the GHCB shared buffer as needed.
Since the information is copied to, and operated on, in the GHCB shared
buffer this has the added benefit of not requiring to save the start and
end entries for use when validating the memory during the page state
change sequence.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4654
The SNP_PAGE_STATE_MAX_ENTRY is based on the number of entries that can
fit in the GHCB shared buffer. As a result, the SNP_PAGE_STATE_CHANGE_INFO
structure maps the full GHCB shared buffer based on the shared buffer size
being 2032 bytes.
Instead of using a hardcoded value for SNP_PAGE_STATE_MAX_ENTRY, use a
build calculated value. Since the SNP_PAGE_STATE_CHANGE_INFO is used as a
mapping, eliminate the hardcoded array size so that the structure can be
used based on any size buffer.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4736
In UEFI_Spec_2_10_Aug29.pdf page 1694 section 35.5.4 for
EFI_BROWSER_ACTION_FORM_OPEN:
NOTE: EFI_FORM_BROWSER2_PROTOCOL.BrowserCallback() cannot be used with
this browser action because question values have not been retrieved yet.
So should not call HiiGetBrowserData() and HiiSetBrowserData() in FORM_OPEN
call back function.
Now use wifi list key and enroll cert key instead of the connect action key,
move wifi info display from open action to close action.
Cc: Saloni Kasbekar <saloni.kasbekar@intel.com>
Cc: Zachary Clark-williams <zachary.clark-williams@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Felix Polyudov <Felixp@ami.com>
Signed-off-by: Liqi Liu <liqi.liu@intel.com>
Reviewed-by: Zachary Clark-williams <zachary.clark-williams@intel.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
On a multi-processor system, if the BSP dose not know how many APs are
online or cannot wake up the AP via broadcast, it can collect AP
resouces before wakeing up the AP and add a new HOB to save the
processor resouces.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Chao Li <lichao@loongson.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch fix a use-after-free issue where unregistering an
MMI handler could lead to the deletion of the MMI_HANDLER while it is
still in use by MmiManage(). The fix involves modifying
MmiHandlerUnRegister() to detect whether it is being called from
within the MmiManage() stack. If so, the removal of the MMI_HANDLER
is deferred until MmiManage() has finished executing.
Additionally, due to the possibility of recursive MmiManage() calls,
the unregistration and subsequent removal of the MMI_HANDLER are
ensured to occur only after the outermost MmiManage() invocation has
completed.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This patch fix a use-after-free issue where unregistering an
SMI handler could lead to the deletion of the SMI_HANDLER while it is
still in use by SmiManage(). The fix involves modifying
SmiHandlerUnRegister() to detect whether it is being called from
within the SmiManage() stack. If so, the removal of the SMI_HANDLER
is deferred until SmiManage() has finished executing.
Additionally, due to the possibility of recursive SmiManage() calls,
the unregistration and subsequent removal of the SMI_HANDLER are
ensured to occur only after the outermost SmiManage() invocation has
completed.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
When collecting the required library instances for modules and
libraries, included libraries will be recursed to ensure the module is
built with all the libraries directly linked to it and indirectly
linked to it via included libraries.
Using the following scenario as an example:
[LibraryClasses.common.DXE_CORE]
NULL|Path/To/Library1.inf // Includes DebugLib
[LibraryClasses.common.DXE_DRIVER]
NULL|Path/To/Library2.inf // Includes DebugLib
[LibraryClasses.common.DXE_CORE, LibraryClasses.common.DXE_DRIVER]
DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
[Components]
MdeModulePkg/Core/Dxe/DxeMain.inf // Includes DebugLib
The DXE_CORE NULL library will be assigned a fake library class like
NULL1 and the DXE_DRIVER will be assigned NULL2. The recursion logic
will see NULL1 as a directly linked and will add an instance of it to
the list of libraries which need to be included in the module. When
DebugLib is evaluated, the recursion logic will add the libraries
DebugLib depends on to the queue which includes both NULL1 and NULL2.
When NULL2 is unqueued, an instance of it will also be added to the
list of libraries needed to build DxeMain which now means that both
NULL1 and NULL2 have been linked.
NULL includes outside of module overrides are not supported according
to the spec, but we do it anyways so this seems like a case which
should be fixed. This change updates the recursion logic to skip
evaluating NULL libraries unless they are linked directly to the
module/library being evaluated.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Taylor Beebe <taylor.d.beebe@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
