BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2363
This patch is to fix a build tool regression issue which was introduced
by commit b8ac0b7f28.This issue caused map file lost the line of IMAGE=***.
For example,in Ovmf.map, there is no line of (IMAGE=<path to efi> ) under
each of modules item.
The path to the efi file generated by each module is written on this line
The purpose of this line is add the debug image full path.
there is no information about the module in the map file other than FVName,
it allows us to quickly know which module this part corresponds to.
In commit b8ac0b7f28,add a line ("self.BuildModules = []") in function,
but it's used to calculate the variable ModuleList in the following code.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2270
Currently a PCD (e.g. FeaturePCD) cannot be used in a conditional
statement in a DSC/FDF file without a module in the build referencing
the PCD package DEC file.
An example implementation that to support this is to allow a [Packages]
section in the DSC file to list additional package dependencies for PCD
references in the package DSC/FDF files.
this patch is going to add the ability to have the [packages] section
defined in the DSC file
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2118
When a packet is queued/completed for the asynchronous IO queue, the logic
to roll over to the front of the queue doesn't account for actual size of
the IO Submission/Completion queue.
This causes a device to hang due to doorbell being outside of visible
queue. An example would be if an NVMe drive only supported a queue size of
128 while the driver supports 256.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2333
During a SetVariable () invocation, UpdateVariable () is called.
UpdateVariable () contains logic to determine whether a volatile or
non-volatile UEFI variable was set so the corresponding runtime
cache can be updated to reflect the change. The current logic simply
evaluates Variable->Volatile to determine which runtime cache should
be updated.
The problem is Variable->Volatile does not always reflect whether a
volatile variable is being set. Variable->Volatile is set to TRUE
only in the case a pre-existing variable is found in the volatile
variable store. Therefore, the value is FALSE when a new volatile
variable is written.
This change updates the logic to take this into account. If a new
variable is written successfully, the Attributes will accurately
reflect whether the variable is non-volatile. If a pre-existing
variable is modified, the Volatile field will reflect the type of
variable (Attributes are not reliable; e.g. 0x0 indicates deletion).
* Observable symptom: A volatile variable that was set successfully
might return EFI_NOT_FOUND when the variable should be found.
* The issue is a regression introduced to the variable services only
when the variable runtime cache is enabled by the following PCD
being set to TRUE:
gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
* The issue was implemented in commit aab3b9b9a1 but the PCD was not
set to TRUE by default enabling the issue until commit e07b7d024a.
Fixes: aab3b9b9a1
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1871
This is null version of RngLib which should be used with modules that
inherit an (indirect) dependency on the RngLib class, but never actually
call RngLib APIs for consuming randomness.
To be more specific, if following components or functionalities are used
in a platform, the BaseRngLibNull should *not* be used. Instead, a non-Null
version of RngLib must be used (like BaseRngLib for IA32/X64, or future
DxeRngLibRngProtocol for all ARCHs).
- HddPasswordDxe.inf
- AES, TLS (TlsDxe.inf, TlsLib.inf), RSA_OAEP, RSA_PK1
- (If BaseRngLibNull interface ASSERTed at boot time)
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2329
XD (ExecutionDisable) feature, when turned on, allows page table
entry BIT63 set to 1 indicating the memory pointed by the page table
is disallowed to execute.
DxeIpl::CreateIdentityMappingPageTables() enables the XD when CPU
supports it.
Later DxeCore modifies the page table to set the BIT63 to protect
the stack/heap to disallow code execution in stack/heap.
UefiCpuPkg/CpuCommonFeaturesLib enables/disables the XD feature
according to PcdCpuFeaturesSetting.
When XD is disabled, GP fault is generated immediately because some
page entries have BIT63 set.
To fix this issue, this patch removes the XD feature logic from
UefiCpuPkg/CpuCommonFeaturesLib so the XD feature is only taken
care of by DxeIpl.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add directory for the Mergify YML configuration files that
provides rules and actions used to process a pull request.
* Auto commit a PR from EDK II Maintainer with 'push' label
set and all CI checks pass
* Auto close a PR from any developers without 'push' label
set and all CI checks pass.
* Auto close a PR from a non EDK II Maintainer that has
the 'push' label set.
* Post a comment to a PR that has a merge conflict.
Submitter can resolved conflicts and reopen the PR.
* Post a comment to a PR that fails PatchCheck.py
Submitter can resolve PatchCheck.py issues and
reopen the PR.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Use BaseCryptLibNull and TlsLibNull for package CI
builds to reduce package build times. Enabled with
CONTINUOUS_INTEGRATION in YAML files. By default
CONTINUOUS_INTEGRATION is not defined, and the
original lib mappings are preserved.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Use BaseCryptLibNull for package CI builds to reduce package
build times. Enabled with CONTINUOUS_INTEGRATION in YAML
files. By default CONTINUOUS_INTEGRATION is not defined,
and the original lib mappings are preserved.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add use of RC_PATH define that provides the path to the resource
compiler that is typically provided in a Windows SDK. The path
changes with different Windows SDK releases. This define is set
to the WINSDK_PATH_FOR_RC_EXE environment variable. This
environment variable must be set to the path to the currently
installed resource compiler (rc.exe).
Update set_vsprefix_envs.bat to set WINSDK_PATH_FOR_RC_EXE
if a Windows SDK is detected.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove references to the number of submodules in the tree, as well as
reword the referring to specific submodules as "former" and "previous".
This means we won't need to keep updating the surrounding text if we
add/remove submodules.
Cc: Andrew Fish <afish@apple.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2303
Whenever a PCI device is discovered, PCI bus calls the
EDKII_DEVICE_SECURITY_PROTOCOL to authenticate it.
If the function returns success, the PCI bus allocates
the resource and installs the PCI_IO for the device.
If the function returns fail, the PCI bus skips the device.
It is similar to EFI_SECURITY_ARCH_PROTOCOL, which
is used to verify an EFI image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Yun Lou <yun.lou@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
When a boot loader examines the memory map, it can see that location 0
is available memory. If it chooses to use that memory, and
PcdNullPointerDetectionPropertyMask is enabled, use of memory in page 0
will cause an exception. This does occur when running the memtest86
program.
Leaving page 0 available is for legacy support purpose. Since we have
deprecated the support of legacy, the solution is just reserving it so
that it cannot be allocated for other uses.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1885
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
In order to permit the use of compilers that only implement the small
code model [which involves the use of ADRP instructions that require
4 KB segment alignment] for generating PE/COFF binaries with a small
footprint, we patch ADRP instructions into ADR instructions while doing
the ELF to PE/COFF conversion.
As it turns out, the linker may be doing the same, but for different
reasons: there is a silicon erratum #843419 for ARM Cortex-A53 which
affects ADRP instructions appearing at a certain offset in memory, and
one of the mitigations for this erratum is to patch them into ADR
instructions at link time if the symbol reference is within -/+ 1 MB.
However, the LD linker fails to update the static relocation tables, and
so we end up with an ADR instruction in the fully linked binary, but
with a relocation entry in the RELA section identifying it as an ADRP
instruction.
Since the linker has already updated the symbol reference, there is no
handling needed in GenFw for such instructions, and we can simply treat
it as an ordinary ADR. However, since it is guaranteed to be accompanied
by an add or load instruction with a LO12 relocation referencing the same
symbol, the section offset check we apply to ADR instructions is going to
take place anyway, so we can just disregard the ADR instruction entirely.
Reported-by: Eugene Cohen <eugene@hp.com>
Suggested-by: Eugene Cohen <eugene@hp.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a PCD to govern whether to use DT or ACPI in case the
variable governing this is not found or is not valid.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We have discussed in this thread.
https://edk2.groups.io/g/devel/topic/32205028
Before the change, TPM FW upgrade will impact TPM2 ACPI PCR value because
TPM2 ACPI HID include FW version.
This change make the measurement before TPM2 HID fixup. So, after TPM FW
upgrade, the ACPI PCR record remains the same.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2327
RAID drivers abstract their physical drives that make up
the array into a single unit, and do not supply individual
EFI_BLOCK_IO_PROTOCOL instances for each physical drive in the array.
This breaks support for the Security Storage Command Protocol,
which currently requires an EFI_BLOCK_IO_PROTOCOL to be associated
with the same device the protocol is installed on and provide
all the same parameters.
This patch remove dependency on EFI_BLOCK_IO_PROTOCOL and
allows access to Opal drive members of a RAID array.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Sets gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE in OvmfPkgIa32.dsc, OvmfPkgIa32X64.dsc, and OvmfPkgX64.dsc
so that when SMM_REQUIRE is TRUE, the SMM variable driver will not
use the runtime variable cache.
This is done for OvmfPkg because it currently depends upon a SMM
variable GetVariable ()implementation as a simple method to exercise
the SMM driver stack. This allows the following commands to be used
for variables such as Boot####, BootOrder, and BootNext to test SMM
timing and stability differences on the BSP (e.g. CPU#0) vs an
AP (e.g. CPU#1).
# taskset -c 0 efibootmgr
# taskset -c 1 efibootmgr
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2220
This change reduces SMIs for GetVariable () by maintaining a
UEFI variable cache in Runtime DXE in addition to the pre-
existing cache in SMRAM. When the Runtime Service GetVariable()
is invoked, a Runtime DXE cache is used instead of triggering an
SMI to VariableSmm. This can improve overall system performance
by servicing variable read requests without rendezvousing all
cores into SMM.
The runtime cache can be disabled with by setting the FeaturePCD
gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE. If the PCD is set to FALSE, the runtime cache will not be
used and an SMI will be triggered for Runtime Service
GetVariable () and GetNextVariableName () invocations.
The following are important points regarding the behavior of the
variable drivers when the variable runtime cache is enabled.
1. All of the non-volatile storage contents are loaded into the
cache upon driver load. This one time load operation from storage
is preferred as opposed to building the cache on demand. An on-
demand cache would require a fallback SMI to load data into the
cache as variables are requested.
2. SetVariable () requests will continue to always trigger an SMI.
This occurs regardless of whether the variable is volatile or
non-volatile.
3. Both volatile and non-volatile variables are cached in a runtime
buffer. As is the case in the current EDK II variable driver, they
continue to be cached in separate buffers.
4. The cache in Runtime DXE and SMM are intended to be exact copies
of one another. All SMM variable accesses only return data from the
SMM cache. The runtime caches are only updated after the variable I/O
operation is successful in SMM. The runtime caches are only updated
from SMM.
5. Synchronization mechanisms are in place to ensure the runtime cache
content integrity with the SMM cache. These may result in updates to
runtime cache that are the same in content but different in offset and
size from updates to the SMM cache.
When using SMM variables with runtime cache enabled, two caches will now
be present.
1. "Runtime Cache" - Maintained in VariableSmmRuntimeDxe. Used to service
Runtime Services GetVariable () and GetNextVariableName () callers.
2. "SMM Cache" - Maintained in VariableSmm to service SMM GetVariable ()
and GetNextVariableName () callers.
a. This cache is retained so SMM modules do not operate on data outside
SMRAM.
Because a race condition can occur if an SMI occurs during the execution
of runtime code reading from the runtime cache, a runtime cache read lock
is introduced that explicitly moves pending updates from SMM to the runtime
cache if an SMM update occurs while the runtime cache is locked. Note that
it is not expected a Runtime services call will interrupt SMM processing
since all CPU cores rendezvous in SMM.
It is possible to view UEFI variable read and write statistics by setting
the gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics FeaturePcd
to TRUE and using the VariableInfo UEFI application in MdeModulePkg to dump
variable statistics to the console. By doing so, a user can view the number
of GetVariable () hits from the Runtime DXE variable driver (Runtime Cache
hits) and the SMM variable driver (SMM Cache hits). SMM Cache hits for
GetVariable () will occur when SMM modules invoke GetVariable ().
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2220
The current VariableInfo application only checks for variable
statistics from SMM if the variable information entries are
not present in the UEFI System Configuration table as published
by the DXE UEFI variable driver (VariableRuntimeDxe).
This change first checks for variable information entries in the
UEFI System Configuration but always checks for entries in SMM
as well. If the SMM variable driver is not present, an instance of
EFI_SMM_VARIABLE_PROTOCOL will not be found and the search for
SMM variable statistics will be aborted (an SW SMI to get variable
statistics will not be triggered).
In the case variable statistics are provided by both a Runtime DXE
driver (e.g. VariableSmmRuntimeDxe) and a SMM driver (VariableSmm),
this change will clearly identify statistics from each respective
driver.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
This change moves the following functions into a dedicated file
so they may be used in other variable files as needed. These are
commonly needed for basic variable data structure parsing
operations. The functions are grouped together in VariableParsing.c
to support cohesiveness for these operations in the file.
Furthermore, it reduces the overall size of the common Variable.c
file.
* DataSizeOfVariable ()
* FindVariableEx ()
* GetEndPointer ()
* GetNextVariablePtr ()
* GetStartPointer ()
* GetVariableDataOffset ()
* GetVariableDataPtr ()
* GetVariableHeaderSize ()
* GetVariableNamePtr ()
* GetVariableStoreStatus ()
* GetVendorGuidPtr ()
* IsValidVariableHeader ()
* NameSizeOfVariable ()
* SetDataSizeOfVariable ()
* SetNameSizeOfVariable ()
* UpdateVariableInfo ()
* VariableCompareTimeStampInternal ()
* VariableServiceGetNextVariableInternal ()
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before called by GetBufferForValue(), Value has already been called
function IsTypeInBuffer to make sure the value must be buffer type.
So GetBufferForValue can not return NULL.
This commit adds ASSERT to assume (GetBufferForValue (&Value) is not
NULL.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Upgrade openssl from 1.1.1b to 1.1.1d.
Something needs to be noticed is that, there is a bug existing in the
released 1_1_1d version(894da2fb7ed5d314ee5c2fc9fd2d9b8b74111596),
which causes build failure. So we switch the code base to a usable
version, which is 2 commits later than the stable tag.
Now we use the version c3656cc594daac8167721dde7220f0e59ae146fc.
This log is to fix the build failure.
https://bugzilla.tianocore.org/show_bug.cgi?id=2226
Besides, the absense of "DSO_NONE" in dso_conf.h causes build failure
in OvmfPkg. So update process_files.pl to generate information from
"crypto/include/internal/dso_conf.h.in".
shm.h and utsname.h are added to avoid GCC build failure.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
MpInitLib sets X2ApicEnable in two places.
1. CollectProcessorCount()
This function is called when MpInitLibInitialize() hasn't been
called before.
It sets X2ApicEnable and later in the same function it configures
all CPUs to operate in X2 APIC mode.
2. MpInitLibInitialize()
The X2ApicEnable setting happens when this function is called in
second time. But after that setting, no code consumes that flag.
With the above analysis and with the purpose of simplifying the code,
the X2ApicEnable in #1 is changed to local variable and the #2 can be
changed to remove the setting of X2ApicEnable.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's logic sets X2ApicEnable flag in each AP's initialization
path when InitFlag == ApInitConfig.
Since all CPUs update the same global data, a spin-lock is used
to avoid modifications from multiple CPUs happen at the same time.
The spin-lock causes two problems:
1. Potential performance downgrade.
2. Undefined behavior when improper timer lib is used.
For example we saw certain platforms used AcpiTimerLib from
PcAtChipsetPkg and that library depends on retrieving PeiServices
from idtr. But in fact AP's (idtr - 4) doesn't point to
PeiServices.
The patch simplifies the code to let BSP set the X2ApicEnable flag so
the spin-lock acquisition from AP is not needed any more.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
RequestMap is used but not Initialized.
RequestMap is called by UhciMapUserRequest, in which RequestMap(Map)
is called by IoMmuMap, and is finally called by IoMmu->Map.
We can not assume RequestMap is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Map is used but not Initialized.
Map is called by IoMmuMap, in which Mapping(Map) is called by IoMmu->Map.
We can not assume Map is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Foreground and background color are saved in a single byte.
Bits 0..3 are the foreground color and bits 4..6 are the background color.
If the Private->Attribute defined correctly, (Private->Attribute >> 4)
must be less than 8.
This commit uses ASSERT to assume "Attribute >> 4" is less than 8.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
IndexTable->Length is used as index in array IndexTable->Index[].
So IndexTable->Length needs to be checked, which should be less than
the array size.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The ACPI specification, version 6.3, January 2019,
defines the Named Object Encoding for ExternalOp
in section '20.2.5.2 Named Objects Encoding'.
This patch adds the definition for ExternalOp to
the list of Primary Opcode definitions.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2295
The current implementation of the FileHandleGetFileName() function
assumes that the Root directory always has the FileName '\0'.
However, the only requirement the UEFI specification defines is that
a prepended '\\' must be supported to access files and folders
relative to the Root directory.
This patch removes this assumption and supports constructing valid
paths for any value of FileName for the Root Directory.
In practice, this fixes compatibility issues with File System drivers
that report '\\' as the FileName of the Root directory, which
currently is both generating an invalid path ("\\\\") and resulting
in an EFI_NOT_FOUND result from the CurrentHandle->Open() call.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Using the inet_pton() function that we imported in the previous patches,
recognize if "HostName" is an IP address literal, and then parse it into
binary representation. Passing the latter to OpenSSL for server
certificate validation is important, per RFC-2818
<https://tools.ietf.org/html/rfc2818#section-3.1>:
> In some cases, the URI is specified as an IP address rather than a
> hostname. In this case, the iPAddress subjectAltName must be present in
> the certificate and must exactly match the IP in the URI.
Note: we cannot use X509_VERIFY_PARAM_set1_ip_asc() because in the OpenSSL
version that is currently consumed by edk2, said function depends on
sscanf() for parsing IPv4 literals. In
"CryptoPkg/Library/BaseCryptLib/SysCall/CrtWrapper.c", we only provide an
empty -- always failing -- stub for sscanf(), however.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Suggested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For TianoCore BZ#1734, StdLib has been moved from the edk2 project to the
edk2-libc project, in commit 964f432b9b ("edk2: Remove AppPkg, StdLib,
StdLibPrivateInternalFiles", 2019-04-29).
We'd like to use the inet_pton() function in CryptoPkg. Resurrect the
"inet_pton.c" file from just before the StdLib removal, as follows:
$ git show \
964f432b9b0a^:StdLib/BsdSocketLib/inet_pton.c \
> CryptoPkg/Library/BaseCryptLib/SysCall/inet_pton.c
The inet_pton() function is only intended for the DXE phase at this time,
therefore only the "BaseCryptLib" instance INF file receives the new file.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In a later patch in this series, we're going to resurrect "inet_pton.c"
(originally from the StdLib package). That source file has a number of
standard C and BSD socket dependencies. Provide those dependencies here:
- The header files below will simply #include <CrtLibSupport.h>:
- arpa/inet.h
- arpa/nameser.h
- netinet/in.h
- sys/param.h
- sys/socket.h
- EAFNOSUPPORT comes from "StdLib/Include/errno.h", at commit
e2d3a25f1a31; which is the commit immediately preceding the removal of
StdLib from edk2 (964f432b9b).
Note that the other error macro, which we alread #define, namely EINVAL,
has a value (22) that also matches "StdLib/Include/errno.h".
- The AF_INET and AF_INET6 address family macros come from
"StdLib/Include/sys/socket.h".
- The NS_INT16SZ, NS_INADDRSZ and NS_IN6ADDRSZ macros come from
"StdLib/Include/arpa/nameser.h".
- The "u_int" and "u_char" types come from "StdLib/Include/sys/types.h".
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
According to the ISO C standard, strchr() is a function. We #define it as
a macro. Unfortunately, our macro evaluates the first argument ("str")
twice. If the expression passed for "str" has side effects, the behavior
may be undefined.
In a later patch in this series, we're going to resurrect "inet_pton.c"
(originally from the StdLib package), which calls strchr() just like that:
strchr((xdigits = xdigits_l), ch)
strchr((xdigits = xdigits_u), ch)
To enable this kind of function call, turn strchr() into a function.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For now, PlatformRecovery doesn't work if OsIndications variable
doesn't exist, which is wrong.
According to the UEFI specification section 3.4.1 and 3.4.2, if
processing of BootOrder does not result in success, the OsRecovery
and PlatformRecovery options should still be processed regardless of
the existence of the OsIndications variable.
Therefore, update the code to check PcdPlatformRecoverySupport instead
of the value of OsIndications variable (PlatformRecovery) to fix
this issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Walon Li <walon.li@hpe.com>
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2312
This patch is for fixing unexpected system hang during S3 unlock process.
FatPei driver maintained and updated internal BlockIo devices list
when there is new BlockIo PPI has installed, and it relied on BlockIo PPI
service to get data from devices. Because BlockIo Ppi leverage
NvmExpressPei Ppi to transit Nvm command to device, we should make sure
NvmePassThruPpi installed before BlockIo PPI.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
This patch fixes a problem introduced by commit
61bb6eeb4d.
The PcdSnpCreateExitBootServicesEvent is not guaranteed to be FixedAtBuild,
so use PcdGetBool() to supports both fixed and patchable PCD.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2310
When target FV 99% used and only few bytes space left,
SplitFspBin.py may crash with below error:
File "SplitFspBin.py", line 457, in ParseFv
ffshdr = EFI_FFS_FILE_HEADER.from_buffer (self.FvData, offset)
ValueError: Buffer size too small
(40960 instead of at least 40968 bytes)
It was because the offset used by FFS_HEADER parser out of bounds.
It should stop parsing when offset equal or larger than
(buffer size - FFS_HEADER size).
This patch also fixed another crash issue when running script with
Python 3.x and no input parameter given:
File "SplitFspBin.py", line 868, in main
if args.which in ['rebase', 'split', 'genhdr', 'info']:
AttributeError: 'Namespace' object has no attribute 'which'
Test:
1. Ran script with both py2 and py3 with no input and no crash observed.
2. Compare the script result before and after the patch are identical.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
1. Add WIN_HOST_BUILD macro check for CLANG9 tool chain
build -p EmulatorPkg\EmulatorPkg.dsc -a IA32 -DWIN_HOST_BUILD=TRUE -t CLANG9
build -p EmulatorPkg\EmulatorPkg.dsc -a X64 -DWIN_HOST_BUILD=TRUE -t CLANG9
2. Append CLANG CC and LINK flags to generate windows HOST.
3. Fix WinHost issue to call GetProcessAffinityMask() API.
The input parameter should be UINTN pointer instead of UINT32 pointer.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
CLANG9 generated PE image exposes below two issues.
1. SectionSize is used to copy PE section data. It should be smaller than
section raw size.
2. The real data is required to be copied. So, copy the min size of
VirtualSize and SizeOfRawData.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2255
Update UefiCpuPkg.dsc to guarantee all libraries and
modules are always built. Add the following components.
* UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
* UefiCpuPkg/Library/CpuCommonFeaturesLib/CpuCommonFeaturesLib.inf
ResetVector.inf is a binary INF, so no source builds are
triggered from adding this line. However, a build with
this component does verify the contents of the INF file.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Currently some tests check the value of SOURCE_DEBUG_ENABLE, and some
tests check if it's defined or not. Additionally, in UefiPayloadPkg as
well as some other trees, we define it as FALSE in the .dsc file.
This patch changes all of the Ovmf platforms to explicitly define it as
FALSE by default, and changes all of the checks to test if the value is
TRUE.
Signed-off-by: Peter Jones <pjones@redhat.com>
Message-Id: <20190920184507.909884-1-pjones@redhat.com>
[lersek@redhat.com: drop Contributed-under line, per TianoCore BZ#1373]
[lersek@redhat.com: replace "!= TRUE" with more idiomatic "== FALSE"]
Cc: Andrew Fish <afish@apple.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The SRAT generator uses the configuration manager protocol
to obtain the affinity information for the GICC, GIC ITS,
Memory, Generic Initiator, etc. and generates the SRAT table.
The table generator supports ACPI 6.3, SRAT table revision 3.
The ACPI and PCI device handles of the Generic Initiator
Affinity structures are represented using tokens. The
generator invokes the configuration manager protocol
interfaces and requests for objects referenced by tokens
to get the device handle information.
The Configuration Manager object definition for the GICC has
been updated to include the Proximity Domain, Clock Domain
and associated flag information. Similarly the Configuration
Manager object for the GIC ITS has been updated to include
the Proximity Domain information. These changes should not
impact any existing implementations as the new fields have
been added towards the end of the Configuration Manager
Objects.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Patch addresses Bugzilla #1974.
During ExitBootServices stage, drivers should not call any
functions known to use Memory Allocation Services. One of such
functions (as per UEFI spec) is UNDI->Shutdown().
Since UNDI drivers during ExitBootServices phase are expected
to put the adapter to such a state that it will not perform any DMA
operations, there is no need to interface UNDI by SNP driver during
that phase.
Finally, since ExitBootServices event notification function in SNP
only calls UNDI->Shutdown() and Stop() functions, there is no need
to create this event at all. Adding PCD to control creation of event
reacting to ExitBootServices() call so that systems with UNDIs relying
on SNP to call their Shutdown() and Stop() can still work.
Change-Id: Idd76f26d2e8ff7cf88b2d75e2d524c74211f2e89
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Add support for allocating aligned pages at an alignment higher
than 4K. The new function allocated memory taking into account
the padding required and then frees up unused pages before mapping
it.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
While allocating pages aligned at an alignment higher than
4K, allocate memory taking into consideration the padding
required for that alignment. The calls to free pages takes
care of this already.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
commit a7e2d20193 introduces the code to
get PcdTpm2AcpiTableRev in the driver entry point. This PCD is designed as
DynamicHii or DynamicHiiEx PCD. So, this PCD depends on Variable service.
To make sure PcdTpm2AcpiTableRev value be got, add Variable service as Depex.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: jiewen Yao <jiewen.yao@intel.com>
When c/h file use macro after #include, for example,
In this case, GenMake is not able to create a healthy dependency for the c
file. GenMake used to add $(FORCE_REBUILD) dependency in the c file, this
guarantee the c file is always compiled in incremental build. But, this
function is broken since 05217d210e which
enable /MP for MSVC compiler, in order to compile multiple c files in one
command multi-processing. The fix here is adding '$(FORCE_REBUILD)' back to
retain the original function.
Line number 1728 and 978 are the code pieces which handle this logic.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
An extra 's' slipped into the 'processing' word.
Drop it to fix the typo.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
An extra 's' slipped into the FvIsBeingProcessed function
name. Drop it to fix the typo.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Similar to what we now do for OVMF, we need to consider the possibility
that PlatformBootManagerWaitCallback () may be called with a
PcdPlatformBootTimeOut that was set to zero, in which case the call should
simply return.
We also change the initial timeout variable name to make the code explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-3-pete@akeo.ie>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Independently of how we decide to address other aspects of the regression
introduced with commit 2de1f611be, it doesn't
make much sense to call for a progress update if PcdPlatformBootTimeOut is
zero.
PcdPlatformBootTimeOut 0, which is the cause of the bug (division by zero)
should be considered to indicate that a platform is not interested in
displaying a progress report, so we alter PlatformBootManagerWaitCallback
to behave that way.
We also change one variable name to make the code more explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-2-pete@akeo.ie>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Commit 2de1f611be introduced a regression
whereas platforms that did set PcdPlatformBootTimeOut to 0 are now getting
an unexpected call to PlatformBootManagerWaitCallback().
This patch also ensures that, if PcdPlatformBootTimeOut is 0xFFFF we don't
call PlatformBootManagerWaitCallback() with a zero argument as doing so
would produce an unwarranted jump to full progress completion which is
likely to throw off users.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
- If a platform boots such that the boot CPU count is smaller than
PcdCpuMaxLogicalProcessorNumber, then the platform cannot use the "fast
AP detection" logic added in commit 6e1987f19a. (Which has been
documented as a subset of use case (2) in the previous patch.)
Said logic depends on the boot CPU count being equal to
PcdCpuMaxLogicalProcessorNumber. If the equality does not hold, the
platform either has to wait too long, or risk missing APs due to an
early timeout.
- The platform may not be able to use the variant added in commit
0594ec417c either. (Which has been documented as use case (1) in the
previous patch.)
See commit 861218740d. When OVMF runs on QEMU/KVM, APs may check in
with the BSP in arbitrary order, plus the individual AP may take
arbitrarily long to check-in. If "NumApsExecuting" falls to zero
mid-enumeration, APs will be missed.
Allow platforms to specify the exact boot CPU count, independently of
PcdCpuMaxLogicalProcessorNumber. In this mode, the BSP waits for all APs
to check-in regardless of timeout. If at least one AP fails to check-in,
then the AP enumeration hangs forever. That is the desired behavior when
the exact boot CPU count is known in advance. (A hung boot is better than
an AP checking-in after timeout, and executing code from released
storage.)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The last parameter of ReserveResourceInGcd() is "ImageHandle", forwarded
in turn to gDS->AllocateMemorySpace() or gDS->AllocateIoSpace() as "owner"
image handle.
But BlDxeEntryPoint() passes "SystemTable" as "ImageHandle".
Compilers have not flagged it because EFI_HANDLE (the type of
"ImageHandle") is unfortunately specified as (VOID*), and
(EFI_SYSTEM_TABLE*) converts to (VOID*) silently.
Hand the entry point function's "ImageHandle" parameter to
ReserveResourceInGcd(). This fixes an actual bug.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
(This patch is unrelated to the rest of this series; its purpose is to
enable building the UefiPayloadPkg DSC files with GCC.)
When building "UefiPayloadPkg/UefiPayloadPkgIa32.dsc" with GCC48 for the
DEBUG target, the compiler reports that "Entry32" may be used
uninitialized in ParseAcpiInfo(), in the XSDT branch.
Code inspection proves the compiler right. In the XSDT branch, the code
from the RSDT branch must have been duplicated, and "Entry32" references
were replaced with "Entry64" -- except where "MmCfgHdr" is assigned.
Fix this bug by introducing a helper variable called "Signature", so that
we have to refer to "Entry32" or "Entry64" only once per loop body.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The FvHasBeenProcessed() and FvIsBeingProcesssed() functions make sure
that every firmware volume is processed only once (every driver in every
firmware volume should be discovered only once). For this, the functions
use a linked list.
In MdeModulePkg's DXE Core and SMM Core, the key used for identifying
those firmware volumes that have been processed is the EFI_HANDLE on which
the DXE or SMM firmware volume protocol is installed. In the
StandaloneMmPkg core however, the key is the address of the firmware
volume header; that is, it has type (EFI_FIRMWARE_VOLUME_HEADER*).
(EFI_FIRMWARE_VOLUME_HEADER*) has nothing to do with EFI_HANDLE.
EFI_HANDLE just happens to be specified as (VOID*), and therefore the
conversion between (EFI_FIRMWARE_VOLUME_HEADER*) and EFI_HANDLE is silent.
(The FvHasBeenProcessed() and FvIsBeingProcesssed() functions were likely
copied verbatim from MdeModulePkg's DXE Core and/or the SMM Core, and not
flagged by the compiler in StandaloneMmPkg due to UEFI regrettably
specifying EFI_HANDLE as (VOID*), thereby enabling the above implicit
conversion.)
We should not exploit this circumstance. Represent the key type faithfully
instead.
This is a semantic fix; there is no change in operation.
Cc: Achin Gupta <achin.gupta@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The EDK 1 Shell (available at <https://github.com/tianocore/edk-Shell>)
has a bug in its EFI_SHELL_ENVIRONMENT2.Execute() implementation that
edk2's UefiShellLib has no choice but to work around.
Improve the explanation in the code. Also, document the implicit
EFI_HANDLE -> (EFI_HANDLE*) conversion, which happens implicitly after
dereferencing ParentHandle, with an explicit cast.
In practice, this patch is a no-op.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In the FileBufferSave() function, we invoke ShellCloseFile() if "Directory
Can Not Be Saved".
The ShellCloseFile() function takes a (SHELL_FILE_HANDLE*) parameter
called "FileHandle", and correctly passes the de-referenced (*FileHandle)
to EFI_SHELL_CLOSE_FILE, which takes a SHELL_FILE_HANDLE.
However, FileBufferSave() passes SHELL_FILE_HANDLE to ShellCloseFile(),
not the expected (SHELL_FILE_HANDLE*). Correct it.
This fixes an actual bug that has remained hidden for two reasons:
- pointer-to-VOID converts from/to any pointer-to-object type silently,
- the bug is on an error path which has likely never fired in practice.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The TouchFileByHandle() and IsDirectoryEmpty() functions are passed
SHELL_FILE_HANDLE parameters, and they use those parameters correctly.
However, their parameter lists say EFI_HANDLE.
Spell out the right type in the parameter lists.
In practice, this change is a no-op (because, quite regrettably, both
EFI_HANDLE and SHELL_FILE_HANDLE are specified to be typedefs of (VOID*)).
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The UefiShell*CommandsLib instances have constructor functions that do
something like:
gHiiHandle = HiiAddPackages (...);
...
ShellCommandRegisterCommandName (..., gHiiHandle, ...);
and destructor functions that implement the following pattern:
HiiRemovePackages (gHiiHandle);
The -- semantic, not functional -- problem is that "gHiiHandle" is
declared with type EFI_HANDLE, and not EFI_HII_HANDLE, in all of these
library instances, even though HiiAddPackages() correctly returns
EFI_HII_HANDLE, and HiiRemovePackages() takes EFI_HII_HANDLE.
Once we fix the type of "gHiiHandle", it causes sort of a butterfly
effect, because it is passed around widely. Track down and update all of
those locations.
The DynamicCommand lib instances use a similar pattern, so they are
affected too.
NOTE: in practice, this patch is a no-op, as both EFI_HII_HANDLE and
EFI_HANDLE are typedefs to (VOID*). However, we shouldn't use EFI_HANDLE
where semantically EFI_HII_HANDLE is passed around.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ShellCommandRunConnect() function passes EFI_HANDLE -- (VOID*) --
objects to ConvertAndConnectControllers(), and
ConvertAndConnectControllers() passes those to gBS->OpenProtocol().
Accordingly, ConvertAndConnectControllers() should specify EFI_HANDLE
parameter types, not (EFI_HANDLE*) -- (VOID**) -- types.
This typo is masked because (VOID*) converts to and from any
pointer-to-object type silently.
Note that functionally speaking there is no problem, so this patch does
not change beavior, only cleans up the code.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
EfiCreateProtocolNotifyEvent() takes a (VOID**) for "Registration",
similarly to gBS->RegisterProtocolNotify(). We should pass the address of
an actual pointer-to-VOID, and not the address of an EFI_EVENT. EFI_EVENT
just happens to be specified as (VOID*), and has nothing to do with the
registration.
This change is a no-op in practice; it's a semantic improvement.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are all in Unload() functions, which are probably exercised
infrequently. Fix the UninstallMultipleProtocolInterfaces() calls.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
In the following call tree:
PlatformInit ()
mInstalledPackages = HiiAddPackages ()
GopInstalled ()
PopulateForm (PackageList = mInstalledPackages)
CreateResolutionOptions (PackageList)
HiiSetString (PackageList
HiiUpdateForm (PackageList)
PlatformDxe passes around an EFI_HII_HANDLE that (a) originates from
HiiAddPackages() and (b) is ultimately passed to HiiSetString() and
HiiUpdateForm(). The intermediate functions PopulateForm() and
CreateResolutionOptions() however take that parameter as an
(EFI_HII_HANDLE*).
There is no bug in practice (because the affected functions never try to
de-reference the "PackageList" parameter, they just pass it on), but the
function prototypes are semantically wrong. Fix that.
This could remain hidden so long because pointer-to-VOID silently converts
to/from any pointer-to-object type, and the UEFI spec mandates that
EFI_HII_HANDLE be a typedef to (VOID*).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SignalEvent() boot service takes an EFI_EVENT, not an (EFI_EVENT*).
Fix the call in the notification function of
"EFI_SIMPLE_NETWORK_PROTOCOL.WaitForPacket".
This is an actual bug. The reason it's never been triggered is likely that
the "SNP.WaitForPacket" event is rarely waited for by applications -- edk2
itself has zero instances of that, for example.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
This is an actual bug. It must have remained hidden until now because it's
on an error path. Fix the UninstallMultipleProtocolInterfaces() call.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The SockFreeFoo() callback function for NetbufFromExt() has to match the
NET_VECTOR_EXT_FREE prototype, which takes a (VOID*) as callback argument
(Arg). EFI_EVENT has nothing to do with NET_VECTOR_EXT_FREE. Fix the
SockFreeFoo() parameter list.
This change is a no-op in practice.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Both NetLibDestroyServiceChild() and EFI_SERVICE_BINDING_DESTROY_CHILD
take an EFI_HANDLE for the "ChildHandle" parameter, not an (EFI_HANDLE*).
This patch fixes a real bug.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Both the "ControllerHandle" parameter of CloseProtocol() and the "Handle"
parameter of UninstallMultipleProtocolInterfaces() have type EFI_HANDLE,
not (EFI_HANDLE*).
This patch fixes actual bugs. The issues have been dormant likely because
they are on error paths. (Or, in case of TlsAuthConfigDxe, because the
driver is unloaded likely very infrequently.)
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
NetLibGetSnpHandle() returns an EFI_HANDLE, not an (EFI_HANDLE*).
NetLibGetMacAddress() only uses the return value ("SnpHandle") for a
NULL-check. Fix the type of "SnpHandle".
This patch is a no-op.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
The HandleProtocol() boot service takes an EFI_HANDLE, not an
(EFI_HANDLE*). Remove the bogus cast in the
InternalImageHandleToFvHandle() function.
This is a semantic cleanup; there is no change in behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The BootScriptInsert() and BootScriptLabel() functions take the in/out
parameter "Position" as (EFI_S3_BOOT_SCRIPT_POSITION*), and pass it to
S3BootScriptMoveLastOpcode() and S3BootScriptLabel(), respectively.
The callees take the in/out parameter "Position" as (VOID**). Add explicit
casts for clarity.
There is no change in functionality.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The SmiHandlerRegister() function explicitly casts "SmiHandler" (of type
(SMI_HANDLER*)) to EFI_HANDLE, when outputting "DispatchHandle".
Apply the same cast in the counterpart function SmiHandlerUnRegister(),
which compares multiple "SmiHandler"s against the input "DispatchHandle".
This is a semantic cleanup; there is no functional change.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are on error paths. Fix the UninstallMultipleProtocolInterfaces()
calls.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Clean up two issues around FindFileEx():
- The "AprioriFile" parameter's type differs between the function
declaration and the function definition. The correct type is
(EFI_PEI_FILE_HANDLE*).
- "FfsFileHeader" has type (EFI_FFS_FILE_HEADER*); for clarity, we should
cast it explicitly to EFI_PEI_FILE_HANDLE when assigning it to
(*AprioriFile).
This is a semantic cleanup, there is no functional change.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The PI spec (v1.7) correctly specifies "EFI_RUNTIME_EVENT_ENTRY.Event" in
natural language, but the field type in the structure definition itself is
wrong -- it should be EFI_EVENT, not (EFI_EVENT*).
This spec bug is likely unfixable for compatibility reasons, and so edk2
works it around already. We should clearly document the workaround.
Functionally, this patch is a no-op.
(I've also requested a non-normative (informative) clarification for the
PI spec: <https://mantis.uefi.org/mantis/view.php?id=2017>.)
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The HiiConstructConfigHdr() function takes the "DriverHandle" parameter in
order to fetch the device path from it, and then turn the device path into
PATH routing information.
The HiiConstructConfigHdr() function is called from
VariableCleanupHiiExtractConfig(), which is only installed when "Type" is
"VarCleanupManually" in PlatformVarCleanup().
In that case, we create "Private->DriverHandle" as a new handle, and
install "mVarCleanupHiiVendorDevicePath" on it. Then we pass
"Private->DriverHandle" to HiiAddPackages(), which consumes the device
path for routing purposes.
It follows that the "DriverHandle" argument passed to
HiiConstructConfigHdr() should be the same driver handle, for matching
routing.
Currently we pass "Private->HiiHandle", which is clearly a typo, because
it is the return value of HiiAddPackages(), and stands for the published
HII package list.
Therefore this patch addresses an actual bug.
The typo has not been flagged by compilers because the UEFI spec
regrettably defines both EFI_HANDLE and EFI_HII_HANDLE as (VOID*).
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EfiCreateProtocolNotifyEvent() takes a (VOID**) for "Registration",
similarly to gBS->RegisterProtocolNotify(). We should pass the address of
an actual pointer-to-VOID, and not the address of an EFI_EVENT. EFI_EVENT
just happens to be specified as (VOID*), and has nothing to do with the
registration.
The same applies to gMmst->MmRegisterProtocolNotify().
"mFtwRegistration", "mFvRegistration", and "mFvbRegistration" are used for
nothing else.
This change is a no-op in practice; it's a semantic improvement.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
GetModuleInfoFromHandle() takes an EFI_HANDLE -- (VOID*) -- as first
parameter, but InsertFpdtRecord() passes (EFI_HANDLE*) -- (VOID**).
(VOID**) converts silently to (VOID*), which is why the wrong cast is
masked.
Note that the *value* that is passed is alright -- therefore this patch
does not change behavior --, it's just semantically wrong to pass an
(EFI_HANDLE*) where an EFI_HANDLE is expected.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EFI_REGISTER_KEYSTROKE_NOTIFY and EFI_UNREGISTER_KEYSTROKE_NOTIFY require
the notification handle to have type (VOID*). The notification handle has
nothing to do with the EFI_HANDLE type.
This change is a semantic fix; functionally, it's a no-op.
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The 3rd and 4th parameters of the CloseProtocol() call are wrong.
Given that we're not dissociating a child controller from a parent
controller (= closing a BY_CHILD_CONTROLLER open), but closing a BY_DRIVER
open, the 4th parameter (ControllerHandle) should equal the 1st parameter
(Handle).
It's unclear why this code hasn't crashed before.
Note that the patch doesn't fix the underlying driver model bug. I don't
understand what the loop in MmcDriverBindingStop() attempts to do. Is this
driver supposed to be a bus driver? It seems to create new handles, and to
append device path nodes. But it doesn't set up proper parent/child
protocol opens, and it doesn't close them.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
- The 2nd parameter of EFI_SERVICE_BINDING_CREATE_CHILD is:
IN OUT EFI_HANDLE *ChildHandle
- The 2nd parameter of EFI_SERVICE_BINDING_DESTROY_CHILD is:
IN EFI_HANDLE ChildHandle
Fix the DestroyChild() call in TcpFastbootTransportStop().
This is an actual bugfix; I don't know why the current code doesn't crash.
Perhaps the function is never reached in practice? (It could be tied to an
error path.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch is unrelated to the rest of the series; it just makes sure that
"EmbeddedPkg/EmbeddedPkg.dsc" builds for all platforms advertised in
SUPPORTED_ARCHITECTURES (in particular, X64).
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing loop is set to call PlatformBootManagerWaitCallback every
second except the last one. We believe this is a mistake as it prevents
the called code from performing timeout expiration tasks such as, for
instance, ensuring that the last segment of a progress bar is displayed
before continuing (which is a current issue for the RPi3 platform).
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
While looking at encoding and line ending errors, I found this file
in fact simply points to a sourceforge page which no longer exists.
Since there is nothing more to say than "this is an import of
libfdt", let's just delete it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2232
Commit 0075ab2cec introduced an issue that causes an exception
when multiple workspace packages paths are specified. For example,
if edk2-platforms is used, the root directory will contain an edk
and edk2-platforms directory representing the respective
repositories.
In GenMake, the path to the package DEC file for a module is
discovered by getting the relative path of the INF to the
workspace root directory. Each directory in the relative path
is incrementally joined to the WORKSPACE directory. The file
list in the joined path is searched for a DEC file.
As an example, if the build command is used on a package outside
the edk2 repository, the INF file path is relative to the
edk2-platforms directory not edk2. This causes directory paths
to be built that do not exist. Commit 0075ab2cec replaced the
os.path.exists() call with a try except block that always fails
when os.listdir() is invoked to enumerate the list of files in
the built directory path on packages outside edk2.
This commit restores the original conditional statement which
avoids calling os.listdir() with an invalid directory path.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2216
This patch is going to fix the lib order in static_library_files.lst.
This issue is introduced by commit 673d09a2dd.
Before 673d09a2dd, build tool apply build rule for the module's library
firstly and then apply build rule for module itself. Now, build tool
apply build rule for module self and then for its library. That behavior
impact the lib order in static_library_files.lst.
This patch is to call module's LibraryAutoGenList function
explicitly, where the applying build rule action for
library is triggered.
Cc: Liming Gao <liming.gao@intel.com>
Cc: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
There is a bug in current driver code that makes
it impossible for it to work with devices that
only work in legacy speed mode since the function
EmmcSwitchToHighSpeed will return with EFI_INVALID_PARAMETER
for such bus mode. Since the logic in that function will
work well for SdMmcMmcLegacy this patch just allows
to call this function with SdMmcMmcLegacy bus mode.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
SD specification recommends switching card bus timing before
switching bus timing in controller. Emmc driver used to do
this switch other way around. This commit adds controller
timing switch in EmmcSwitchBusTiming function to enforce this
order and removes all controller timing programming from
EmmcSwitchToXXX functions.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
Stopping the SD clock before switching host controller
bus timing is only necessary if preset value enable is
set in host controller. Code that performs switch to
HS200 doesn't check this condition right now and we also
don't do the SD clock stop before any other bus timing switch
in host controller. Since the driver is generally not ready to support
host controller with preset value enable set we removed this
code.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1039
Current implementation not checks system mode before using
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.X64 or
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.Ia32. This patch check the
mode before using the correct one.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EBC compiler doesn't support C11 static_assert macro.
So, define STATIC_ASSERT as empty to pass EBC arch build.
STATIC_ASSERT macro is introduced @204ae9da230ecbf0910c21acac7aa5d5e8cbb8d0
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
There is no sourceX offset in case when
Configure->PixelFormat == PixelBlueGreenRedReserved8BitPerColor.
We are copying most left pixels instead of copying required rectangle.
Signed-off-by: Gris87 <Gris87@yandex.ru>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in ShellPkg which don't have the policy to defer the
execution of the image.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the caller in PlatformDriOverrideDxe which don't have the policy to
defer the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in UefiBootManagerLib which don't have the policy to defer
the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in DxeCapsuleLibFmp which don't have the policy to defer
the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in EmbeddedPkg which don't have the policy to defer the
execution of the image.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182
Inorder to support VS2019, we add VS2019 config process
in Setup Batch Files,
Because VS2019 and VS2017 could using same vswhere.exe
to detect the InstallationPath,
So we add the -version as the parameter of vswhere
to get the correct VS2017/VS2019's InstallationPath
v3: In BaseTools\set_vsprefix_envs.bat,
move WINSDK10_PREFIX setting into VCToolsInstallDir check condition.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ching JenX Cheng <ching.jenx.cheng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
This reverts commit bc9e4194cf.
This change causes the dependent header files are missing in Makefile.
It makes the incremental build not work. So, revert this change.
Cc: Bob Feng<bob.c.feng@Intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2150
v4:
The v3 posting didn't do what it promised to do, so do it now for real.
V3 changes:
change to mov instruction (non locking instuction) instead
of xchg to simplify design.
V2 changes:
Add xchg 16 bit instructions to handle sgdt and sidt base
63:48 bits and 47:32 bits.
Add comment to explain why xchg 64bit isnt being used
Split lock happens when a locking instruction is used on mis-aligned data
that crosses two cachelines. If close source platform enables Alignment
Check Exception(#AC), They can hit a double fault due to split lock being
in CpuExceptionHandlerLib.
sigt and sgdt saves 10 bytes to memory, 8 bytes is base and 2 bytes is limit.
The data is mis-aligned, can cross two cacheline, and a xchg
instruction(locking instuction) is being utilize.
Signed-off-by: John E Lofgren <john.e.lofgren@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Due to needs a tackling the deficiency of the AP API, it's necessary to
ensure that in non-blocking mode previous AP executed command is
finished before starting new one.
To remedy above:
1) execute AcquireSpinLock instead AcquireSpinLockOrFail - this will
ensure time "window" to eliminate potential race condition between
BSP and AP spinLock release in non-blocking mode.
This also will eliminate possibility to start executing new AP
function before last is finished.
2) remove returns EFI_STATUS - EFI_NOT_READY - in new scenario returned
status is not necessary to caller.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2201
An error occurs using special VpdPcd that is not used in the Inf file
In dsc:
[PcdsDynamicExVpd.common.DEFAULT]
gBoardModuleTokenSpaceGuid.test1|*|{CODE({
{0x0} // terminator
})}
In dec:
[PcdsDynamicEx]
# Vpd GPIO table
gBoardModuleTokenSpaceGuid.test1|{0}|GPIO_INIT_CONFIG[]|0x50000018 {
<HeaderFiles>
Library/GpioLib.h
<Packages>
MdePkg/MdePkg.dec
}
ValueError: invalid literal for int() with base 0: '*'
This Patch is going to fix issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The StandaloneMmPkg .DSC file went out of sync with the changes
applied to the package when I enabled this code on the Synquacer
platform in edk2-platforms. So apply the necessary changes to make
this package build in isolation.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2188
build -p MdeModulePkg\MdeModulePkg.dsc -a IA32 -m
MdeModulePkg\Universal\PCD\Pei\Pcd.inf
Error:
AttributeError: 'PlatformInfo' object has no attribute
'DynamicPcdList'
The DSC data object used to build a separate module today
is PlatformInfo rather than PlatformAutoGen
'PlatformAutoGen' object has attribute 'DynamicPcdList'
This patch is going to fixed this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The header files are used but missing in INF, which causes
warning message when building them.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
After upgrading the CI system we use for building the ArmVirtPkg
targets, we started seeing failures due to the NOOPT build running
out of space when using the CLANG38 toolchain definition combined
with clang 7.
We really don't want to increase the FD/FV sizes in general to
accommodate this, so parameterize the relevant quantities and
increase them by 50% for NOOPT builds.
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Today's behavior is to enable 5l paging when CPU supports it
(CPUID[7,0].ECX.BIT[16] is set).
The patch changes the behavior to enable 5l paging when two
conditions are both met:
1. CPU supports it;
2. The max physical address bits is bigger than 48.
Because 4-level paging can support to address physical address up to
2^48 - 1, there is no need to enable 5-level paging with max
physical address bits <= 48.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
When building BaseTools, GNUmakefile builds create directory
BaseTools/Source/C/libs/. On the other hand, Makefile builds use libs
as an nmake pseudo target, so it either must NOT exist as a file or
directory, OR it must phony dependency like .PHONY. The latter
solution conflicts with NmakeSubdirs.py. Therefore, I make it go away
in the cleanall target. I could also add it to the clean target, but
it strikes me that cleanall should be more forceful.
Signed-off-by: Burt Silverman <burtms@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2157
Hii Pcd links to a efi variable. The Variable
default value is evaluated by related Hii Pcds
setting. If multiple Hii Pcds links to one variable,
and the offset overlap, the later Hii Pcds setting
should be effective. There is a tool bug that is if
the Pcds are in different dsc file which are included
into the platform dsc file, build tool does not get
the Pcds relative position correctly. That means
build tool does not know which Pcd is the later one. As
the result, the variable default value will be incorrect.
This patch is to fix this bug.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
To support auto-connection, EFI_BLUETOOTH_LE_SMP_DATA_TYPE needs to
add a new data type EfiBluetoothSmpPeerAddressList which associates
with a list of Bluetooth per address connected before.
This new data type was added in UEFI spec 2.7b.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1778
We are going to add keyword (lower case) 'static' for functions and global
variables which are not referenced outside their current C file.
However, the ECC tool only recognizes upper case 'STATIC' at this moment.
This will lead to issue reports for new codes that follow the above coding
style.
This patch is going to handle lower case 'static'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The LoadImage() boot service is a bit unusual in that it allocates
resources in a particular failure case; namely, it produces a valid
"ImageHandle" when it returns EFI_SECURITY_VIOLATION. This is supposed to
happen e.g. when Secure Boot verification fails for the image, but the
platform policy for the particular image origin (such as "fixed media" or
"removable media") is DEFER_EXECUTE_ON_SECURITY_VIOLATION. The return code
allows platform logic to selectively override the verification failure,
and launch the image nonetheless.
ArmVirtPkg/PlatformBootManagerLib does not override EFI_SECURITY_VIOLATION
for the kernel image loaded from fw_cfg -- any LoadImage() error is
considered fatal. When we simply treat EFI_SECURITY_VIOLATION like any
other LoadImage() error, we leak the resources associated with
"KernelImageHandle". From a resource usage perspective,
EFI_SECURITY_VIOLATION must be considered "success", and rolled back.
Implement this rollback, without breaking the proper "nesting" of error
handling jumps and labels.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Fixes: 23d04b58e2
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Incorporate the stack protector library into the AARCH64 build of
the Shell binaries as a NULL library resolution, to avoid build
errors when the compiler injects stack integrity checks.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In some cases, the CLANG38 toolchain profile in LTO mode emits GOT
based relocations in spite of our attempts to avoid this, by using
hidden visibility, -Bsymbolic etc.
On AARCH64, we managed to work around this by processing the GOT
based relocations in GenFw. As it turns out, the same issue exists
on 32-bit ARM, but unfortunately, we cannot use a similar trick to
get rid of the GOT entry, and the relocation metadata is insufficient
to locate the GOT entry in the binary.
Note that in this particular case, we are interested in PIE linking
only (i.e., producing a .rela section containing dynamic relocations
that the startup code can process directly), and not in position
independent code generation, and by passing the -pie option to the
linker directly using -Wl,-pie (and dropping -shared), we can coerce
the GOLD linker into doing only the former rather than both when it
performs its LTO code generation.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2153
Current logic will skip searching EFI_PEI_CORE_FV_LOCATION_PPI when the
PPI in PpiList having EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag,
but platform may pass single PPI in PpiList that should be supported.
Changed the logic to verify PpiList first before checking
EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag.
Test: Verified both single EFI_PEI_CORE_FV_LOCATION_PPI and multiple
PPIs in PpiList cases and both can boot with the PeiCore
specified by EFI_PEI_CORE_FV_LOCATION_PPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
We take great care to avoid GOT based relocations in EDK2 executables,
primarily because they are pointless - we don't care about things like
the CoW footprint or relocations that target read-only sections, and so
GOT entries only bloat the binary.
However, in some cases (e.g., when building the relocatable PrePi SEC
module in ArmVirtPkg with the CLANG38 toolchain), we may end up with
some GOT based relocations nonetheless, which break the build since
GenFw does not know how to deal with them.
The relocations emitted in this case are ADRP/LDR instruction pairs
that are annotated as GOT based, which means that it is the linker's
job to emit the GOT entry and tag it with an appropriate dynamic
relocation that ensures that the correct absolute value is stored into
the GOT entry when the executable is loaded. This dynamic relocation is
not visible to GenFw, and so populating the PE/COFF relocation section
for these entries is non-trivial.
Since each ADRP/LDR pair refers to a single symbol that is local to the
binary (given that shared libraries are not supported), we can actually
convert the ADRP/LDR pair into an ADRP/ADD pair that produces the symbol
address directly rather than loading it from memory. This leaves the
GOT entry in the binary, but since it is now unused, it is no longer
necessary to emit a PE/COFF relocation entry for it.
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1955
Refer to PCI express base specification Reversion 5.0, Version
1.0, Table 7-33, Supported Link Speeds Vector bit 3 indicate
the speed 16 GT/s and bit 4 indicate the speed 32 GT/s.
Add the support to shell command 'pci ...'.
Change the MaxLinkSpeed other values' result from 'Unknown'
to 'Reserved' to make the result align.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Oleksiy <oleksiyy@ami.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdRealTimeClockUpdateTimeout is now defined in MdeModulePkg.dec.
This is the only reason that causes PcAtChipsetPkg depends on
MdeModulePkg.
Move the PCD from MdeModulePkg.dec to PcAtChipsetPkg.dec removes
such dependency.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
There are three PCDs that may impact the behavior of each other in
SMM environment:
PcdCpuSmmProfileEnable
PcdHeapGuardPropertyMask in MdeModulePkg
PcdCpuSmmRestrictedMemoryAccess
The patch updates the comments in DEC file to document it.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's behavior is to always restrict access to non-SMRAM regardless
the value of PcdCpuSmmRestrictedMemoryAccess.
Because RAS components require to access all non-SMRAM memory, the
patch changes the code logic to honor PcdCpuSmmRestrictedMemoryAccess
so that only when the PCD is true, the restriction takes affect and
page table memory is also protected.
Because IA32 build doesn't reference this PCD, such restriction
always takes affect in IA32 build.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch changes PiSmmCpu driver to consume PCD
PcdCpuSmmRestrictedMemoryAccess.
Because the behavior controlled by PcdCpuSmmStaticPageTable in
original code is not changed after switching to
PcdCpuSmmRestrictedMemoryAccess.
The functionality is not impacted by this patch.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch adds a new X64 only PCD PcdCpuSmmRestrictedMemoryAccess.
The PCD indicates access to non-SMRAM memory is restricted to
reserved, runtime and ACPI NVS type after SmmReadyToLock.
MMIO access is always allowed regardless of the value of this PCD.
Loose of such restriction is only required by RAS components in X64
platforms.
The PCD value is considered as constantly TRUE in IA32 platforms.
When the PCD value is TRUE, page table is initialized to cover all
memory spaces and the memory occupied by page table is protected by
page table itself as read-only.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since TianoCore EDK2 commit d65f2cea36 ("ShellPkg/CommandLib: Locate
proper UnicodeCollation instance") in edk2 the UEFI Shell crashes if EFI
variable PlatformLang is not defined due to dereferencing gUnicodeCollation
gUnicodeCollation (= NULL) in ShellCommandRegisterCommandName().
Furthermore CommandInit() is leaking PlatformLang if
gUnicodeCollation != NULL.
Close the memory leak and use the first UnicodeCollation instance if
PlatfomLang is not defined.
Fixes: d65f2cea36 ("ShellPkg/CommandLib: Locate proper UnicodeCollation
instance")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2138
Added checks for return parameters of GetSupportedTypes
function calls in InternalHstiFindAip to improve error handling.
An issue was observed on Dell Poweredge R740, where the Dell
PERC H740P controller UEFI driver returned InfoTypesBuffer = NULL,
InfoTypesBufferCount = 0 and caused an FreePool assert.
Signed-off-by: Jayanth Raghuram <Jayanth.Raghuram@Dell.com>
Cc: Wei G Liu <Wei_G_Liu@Dell.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2136
SecPlatformMain is a platform hook function which let platform does
some update. Some platform may adjust SecCoreData->PeiTemporaryRamBase
which caused former saved AllSecPpiList variable invalid.
This patch update the logic to get AllSecPpiList after SecPlatformMain.
If SecPlatformMain() returns no platform-specific PPI list, then there
is nothing to merge, so we don't need "AllSecPpiList" at all.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2019-08-30 21:49:49 +08:00
683 changed files with 19637 additions and 3877 deletions
1. A supported toolchain (others might work but this is what is tested and validated)
* Windows 10:
* VS 2017 or VS 2019
* Windows SDK (for rc)
* Windows WDK (for capsules)
* Ubuntu 16.04
* GCC5
* Easy to add more but this is the current state
2. Python 3.7.x or newer on path
3. git on path
4. Recommended to setup and activate a python virtual environment
5. Install the requirements `pip install --upgrade pip-requirements.txt`
### Running CI
1. clone your edk2 repo
2. Activate your python virtual environment in cmd window
3. Get code dependencies (done only when submodules change)
*`stuart_setup -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>`
4. Update other dependencies (done more often)
*`stuart_update -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>`
5. Run CI build (--help will give you options)
*`stuart_ci_build -c .pytool/CISettings.py TOOL_CHAIN_TAG=<your tag here>`
* -p <pkg1,pkg2,pkg3> : To build only certain packages use a CSV list
* -a <arch1,arch2,arch3>: To run only certain architectures use a CSV list
* -t <target1,target2>: To run only tests related to certain targets use a
CSV list
* By default all tests are opted in. Then given a package.ci.yaml file those
tests can be configured for a package. Finally setting the check to the
value `skip` will skip that plugin. Examples:
*`CompilerPlugin=skip` skip the build test
*`GuidCheck=skip` skip the Guid check
*`SpellCheck=skip` skip the spell checker
* etc
6. Detailed reports and logs per package are captured in the `Build` directory
## Current PyTool Test Capabilities
All CI tests are instances of EDKII Tools plugins. Documentation on the plugin
system can be found [here](https://github.com/tianocore/edk2-pytool-extensions/blob/master/docs/usability/using_plugin_manager.md)
and [here](https://github.com/tianocore/edk2-pytool-extensions/blob/master/docs/features/feature_plugin_manager.md).
Upon invocation, each plugin will be passed the path to the current package
under test and a dictionary containing its targeted configuration, as assembled
from the command line, per-package configuration, and global configuration.
Note: CI plugins are considered unique from build plugins and helper plugins,
even though some CI plugins may execute steps of a build.
In the example, these plugins live alongside the code under test (in the
`.pytool/Plugin` directory), but may be moved to the 'edk2-test' repo if that
location makes more sense for the community.
### Module Inclusion Test - DscCompleteCheck
This test scans all available modules (via INF files) and compares them to the
package-level DSC file for the package each module is contained within. The test
considers it an error if any module does not appear in the `Components` section
of at least one package-level DSC (indicating that it would not be built if the
package were built).
### Code Compilation Test - CompilerPlugin
Once the Module Inclusion Test has verified that all modules would be built if
all package-level DSCs were built, the Code Compilation Test simply runs through
and builds every package-level DSC on every toolchain and for every architecture
that is supported. Any module that fails to build is considered an error.
### GUID Uniqueness Test - GuidCheck
This test works on the collection of all packages rather than an individual
package. It looks at all FILE_GUIDs and GUIDs declared in DEC files and ensures
that they are unique for the codebase. This prevents, for example, accidental
duplication of GUIDs when using an existing INF as a template for a new module.
### Cross-Package Dependency Test - DependencyCheck
This test compares the list of all packages used in INFs files for a given
package against a list of "allowed dependencies" in plugin configuration for
that package. Any module that depends on a disallowed package will cause a test
failure.
### Library Declaration Test - LibraryClassCheck
This test scans at all library header files found in the `Library` folders in
all of the package's declared include directories and ensures that all files
have a matching LibraryClass declaration in the DEC file for the package. Any
missing declarations will cause a failure.
### Invalid Character Test - CharEncodingCheck
This test scans all files in a package to make sure that there are no invalid
Unicode characters that may cause build errors in some character
sets/localizations.
### Spell Checking - cspell
This test runs a spell checker on all files within the package. This is done
using the NodeJs cspell tool. For details check `.pytool/Plugin/SpellCheck`.
For this plugin to run during ci you must install nodejs and cspell and have
both available to the command line when running your CI.
Install
* Install nodejs from https://nodejs.org/en/
* Install cspell
1. Open cmd prompt with access to node and npm
2. Run `npm install -g cspell`
More cspell info: https://github.com/streetsidesoftware/cspell
## PyTool Scopes
Scopes are how the PyTool ext_dep, path_env, and plugins are activated. Meaning
that if an invocable process has a scope active then those ext_dep and path_env
will be active. To allow easy integration of PyTools capabilities there are a
few standard scopes.
| Scope | Invocable | Description |
| :---- | :----- | :---- |
| global | edk2_invocable++ - should be base_abstract_invocable | Running an invocables |
| global-win | edk2_invocable++ | Running on Microsoft Windows |
| global-nix | edk2_invocable++ | Running on Linux based OS |
| edk2-build | | This indicates that an invocable is building EDK2 based UEFI code |
| cibuild | set in .pytool/CISettings.py | Suggested target for edk2 continuous integration builds. Tools used for CiBuilds can use this scope. Example: asl compiler |
## Future investments
* PatchCheck tests as plugins
* MacOS/xcode support
* Clang/LLVM support
* Visual Studio AARCH64 and ARM support
* BaseTools C tools CI/PR and binary release process
// Create Attribution List for all external libraries used
//
[
{Title:"JQuery",Copyright:"Copyright 2017 The jQuery Foundation",Version:$.fn.jquery,LicenseType:"MIT",LicenseLink:"https://jquery.org/license/"},
{Title:"DataTables",Copyright:"DataTables designed and created by SpryMedia Ltd Copyright 2007-2017",Version:$.fn.dataTable.version,LicenseType:"MIT",LicenseLink:"https://datatables.net/license/mit"},
{Title:"BootStrap",Copyright:"Code and documentation copyright 2011-2017 the Bootstrap Authors and Twitter, Inc.",Version:"3.3.7",LicenseType:"MIT",LicenseLink:"https://github.com/twbs/bootstrap/blob/master/LICENSE"}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
