REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4140
Some implementations may need to keep the initial Reset code to be
separated out from rest of the code.This request is to add padding at
lower 4K region below 4 GB which will result having only few jmp
instructions and data at that region.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Duggapu Chinni B <chinni.b.duggapu@intel.com>
ArmTrngLib crashes when run in DEBUG mode due to the fact that it passed
the [truncated] GUID value to a DEBUG() print statement instead of a
pointer to the GUID which is what the %g conversion expects.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4146
Update edk2-pytool-library to version 0.12.0 that adds support for
the environment variable PYTOOL_TEMPORARILY_IGNORE_NESTED_EDK_PACKAGES
that can be set to true to ignore nested packages instead of breaking
the build with an exception. Nested packages are not allowed by the
edk2 specifications. This environment variable allows pytools to run
with reduced functionality if nested packages are present giving
downstream consumers of edk2 that use pytools time to resolve the use
of nested packages and restore all features of pytools.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
The query cpp/conditionallyuninitializedvariable was initially
enabled with the CodeQL code because work was in progress on those
changes. The results were filtered out so CodeQL passed so we could
verify the CodeQL workflow without impacting CI results.
This change allows error severity messages and substitutes that query
with two queries that do not return failures. This allows these
queries to find future problems and prepares the CodeQL workflow to
catch future failures as queries are enabled.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Fixes issues found with the cpp/wrong-type-format-argument CodeQL
rule in BaseTools.
Reference:
https://cwe.mitre.org/data/definitions/686.html
The following CodeQL errors are resolved:
1. Check failure on line 1115 in
BaseTools/Source/C/EfiRom/EfiRom.c
- This argument should be of type 'int' but is of type 'char *'.
- This argument should be of type 'int' but is of type 'signed
char *'.
2. Check failure on line 359 in
BaseTools/Source/C/GenFw/Elf32Convert.c
- This argument should be of type 'CHAR8 *' but is of type
'unsigned int'.
3. Check failure on line 1841 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'unsigned int' but is of type
'unsigned long long'.
4. Check failure on line 1871 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'unsigned int' but is of type
'unsigned long long'.
5. Check failure on line 2400 in
BaseTools/Source/C/GenFv/GenFvInternalLib.c
- This argument should be of type 'unsigned long long' but is of
type 'unsigned int'.
6. Check failure on line 1099 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'CHAR8 *' but is of type
'unsigned int'.
7. Check failure on line 1098 in
BaseTools/Source/C/GenSec/GenSec.c
- This argument should be of type 'CHAR8 *' but is of type
'char **'.
8. Check failure on line 911 in
BaseTools/Source/C/GenSec/GenSec.c
- This argument should be of type 'CHAR8 *' but is of type
'char **'.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This library supports a Boot Services table library implementation
that allows code dependent upon UefiBootServicesTableLib to operate
in an isolated execution environment such as within
the context of a host-based unit test framework.
The unit test should initialize the Boot Services database with any
required elements (e.g. protocols, events, handles, etc.) prior to
the services being invoked by code under test.
It is strongly recommended to clean any global databases (e.g.
protocol, event, handles, etc.) after every unit test so the tests
execute in a predictable manner from a clean state.
This library is being moved here from PrmPkg so it can be made more
generally available to other packages and improved upon for others
use.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
The EFI_RNG_PROTOCOL published by RngDxe has been updated to
implement the EFI_RNG_ALGORITHM_RAW using the Arm TRNG interface
to provide access to entropy.
Therefore, enable EFI_RNG_PROTOCOL for the Kvmtool guest/virtual
firmware.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
Add RngDxe support for Arm. This implementation uses the ArmTrngLib
to support the RawAlgorithm and doens't support the RNDR instruction.
To re-use the RngGetRNG(), RngGetInfo() and FreeAvailableAlgorithms()
functions, create Arm/AArch64 files which implement the arch specific
function GetAvailableAlgorithms(). Indeed, FEAT_RNG instruction is not
supported on Arm.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
PcdCpuRngSupportedAlgorithm should allow to identify the the algorithm
used by the RNDR CPU instruction to generate a random number.
Add a debug warning if the Pcd is not set.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
RawAlgorithm is used to provide access to entropy that is suitable
for cryptographic applications. Therefore, add RawAlgorithm support
that provides access to entropy using the ArmTrngLib.
Also remove unused UefiBootServicesTableLib library inclusion
and Status variable.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
RngGetBytes() relies on the RngLib. The RngLib might use the RNDR
instruction if the FEAT_RNG feature is present. RngGetInfo and
RngGetRNG both must check that RngGetBytes() is working before
advertising/using it.
To do so, allocate an array storing the available algorithms.
The Rng algorithm at the lowest index will be the default Rng
algorithm. The array is shared between RngGetInfo and RngGetRNG.
This array is allocated when the driver is loaded, and freed
when unloaded.
This patch also prevents from having PcdCpuRngSupportedAlgorithm
let to a zero GUID, but let the possibility to have no valid Rng
algorithm in such case.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
This patch:
-Update RngGetBytes() documentation to align the function
definition and declaration.
-Improve input parameter checking. Even though 'This'
it is not used, the parameter should always point to the
current EFI_RNG_PROTOCOL.
-Removes TimerLib inclusion as unused.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
RngGetInfo() is one of the 2 functions of the EFI_RNG_PROTOCOL.
RngGetInfo() is currently a mere wrapper around
ArchGetSupportedRngAlgorithms() which is implemented differently
depending on the architecture used.
RngGetInfo() does nothing more than calling
ArchGetSupportedRngAlgorithms(). So remove it, and let RngGetInfo()
be implemented differently according to the architecture.
This follows the implementation of the other function of the
EFI_RNG_PROTOCOL, RngGetRNG().
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
gEfiRngAlgorithmSp80090Ctr256Guid was used as the default algorithm
in RngGetRNG(). The commit below set the default algorithm to
PcdCpuRngSupportedAlgorithm, which is a zero GUID by default.
As the Pcd value is not defined for any platform in the edk2-platfoms
repository, assume it was an error and go back to the first version,
using gEfiRngAlgorithmSp80090Ctr256Guid.
Fixes: 4e5ecdbac8 ("SecurityPkg: Add support for RngDxe on AARCH64")
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
Rename RdRandGenerateEntropy() to GenerateEntropy() to provide a
common interface to generate entropy on other architectures.
GenerateEntropy() is intended to generate high quality entropy.
Also move the definition to RngDxeInternals.h
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
The Arm True Random Number Generator Firmware, Interface 1.0,
Platform Design Document
(https://developer.arm.com/documentation/den0098/latest/)
defines an interface between an Operating System (OS) executing
at EL1 and Firmware (FW) exposing a conditioned entropy source
that is provided by a TRNG back end.
The conditioned entropy, that is provided by the Arm TRNG interface,
is commonly used to seed deterministic random number generators.
This patch adds an ArmTrngLib library that implements the Arm TRNG
interface.
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
The Arm True Random Number Generator Firmware, Interface 1.0,
Platform Design Document
(https://developer.arm.com/documentation/den0098/latest/)
defines an interface between an Operating System (OS) executing
at EL1 and Firmware (FW) exposing a conditioned entropy source
that is provided by a TRNG back end.
New function IDs have been defined by the specification for
accessing the TRNG services. Therefore, add these definitions
to the Arm standard SMC header.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
The Arm True Random Number Generator (TRNG) library defines an
interface to access the entropy source on a platform. On platforms
that do not have access to an entropy source, a NULL instance of
the TRNG library may be useful to satisfy the build dependency.
Therefore, add a NULL instance of the Arm TRNG library.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
The NIST Special Publications 800-90A, 800-90B and 800-90C
provide recommendations for random number generation. The
NIST 800-90C, Recommendation for Random Bit Generator (RBG)
Constructions, defines the GetEntropy() interface that is
used to access the entropy source. The GetEntropy() interface
is further used by Deterministic Random Bit Generators (DRBG)
to generate random numbers.
The Arm True Random Number Generator (TRNG) library defines an
interface to access the entropy source on a platform, following
the 'Arm True Random Number Generator Firmware Interface'
specification.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Sort the section containing HVC/SMC libraries prior to
adding new libraries in this specific section.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The ArmMonitorLib provides an abstract interface to issue
an HyperVisor Call (HVC) or System Monitor Call (SMC) depending
on the default conduit.
The PcdMonitorConduitHvc PCD allows to select the default conduit.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
The ArmMonitorLib provides an abstract interface to issue
an HyperVisor Call (HVC) or System Monitor Call (SMC) depending
on the default conduit.
The PcdMonitorConduitHvc PCD allows to select the default conduit.
The new library relies on the ArmHvcLib and ArmSmcLib libraries.
A Null instance of these libraries can be used for the unused conduit.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Define a PCD 'PcdMonitorConduitHvc' to select the conduit to use for
monitor calls. PcdMonitorConduitHvc is defined as FALSE by default,
meaning the SMC conduit is enabled as default.
Adding PcdMonitorConduitHvc allows selection of HVC conduit to be used
by virtual firmware implementations.
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
The NorFlashDxe driver in ArmPlatformPkg was shared between development
platforms built by ARM Ltd, and virtual platforms that were once modeled
after Versatile Express, but have very little in common with actual bare
metal implementations.
Both sides have migrated to a domain specific version of the driver, so
we can retire the old one.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4114
FSP specification supports input UPD as NULL cases which FSP will
use built-in UPD region instead.
FSP should not return INVALID_PARAMETER in such cases.
In FSP-T entry point case, the valid FSP-T UPD region pointer will be
passed to platform FSP code to consume.
In FSP-M and FSP-S cases, valid UPD pointer will be decided when
updating corresponding pointer field in FspGlobalData.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Reviewed-by: Ted Kuo <ted.kuo@intel.com>
BZ# 4093: Abstract SmmCpuFeaturesLib for sharing common code
This change stripped away the code that can be
shared with other archs or vendors from Intel
implementation and put in to the common file,
leaves the Intel X86 implementation in the
IntelSmmCpuFeatureLib. Also updates the header
file and INF file.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ# 4093: Abstract SmmCpuFeaturesLib for sharing common code
Rename SmmCpuFeaturesLiCommon.c to
IntelSmmCpuFeaturesLib, because it was developed
specifically for Intel implementation. The code
that can be shared by other archs or vendors
will be stripped away and put in the common
file in the next patch.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Abdul Lateef Attar <abdattar@amd.com>
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Cc: Paul Grimes <paul.grimes@amd.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The following tables can now be generated by the DynamicTablesPkg:
- PCCT
- PPTT
- SRAT
Update the documentation accordingly.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
For Pcc address space, the AccessSize field of a Register is
used to delcare the Pcc Subspace Id. This Id can be up to 256.
Cf. ACPI 6.4, s14.7 Referencing the PCC address space
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Platform Communication Channel Table (PCCT) generator collates
the relevant information required for generating a PCCT table from
configuration manager using the configuration manager protocol.
The DynamicTablesManager then install the PCCT table.
From ACPI 6.4, s14 PLATFORM COMMUNICATIONS CHANNEL (PCC):
The platform communication channel (PCC) is a generic mechanism
for OSPM to communicate with an entity in the platform.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Introduce the following CmObj in the ArmNameSpaceObjects:
- CM_ARM_MAILBOX_REGISTER_INFO
- CM_ARM_PCC_SUBSPACE_CHANNEL_TIMING_INFO
- CM_ARM_PCC_SUBSPACE_GENERIC_INFO
- CM_ARM_PCC_SUBPSACE_TYPE0_INFO
- CM_ARM_PCC_SUBPSACE_TYPE1_INFO
- CM_ARM_PCC_SUBPSACE_TYPE2_INFO
- CM_ARM_PCC_SUBPSACE_TYPE3_INFO
- CM_ARM_PCC_SUBPSACE_TYPE4_INFO
- CM_ARM_PCC_SUBPSACE_TYPE5_INFO
These objects allow to describe mailbox registers, pcc timings
and PCCT subspaces. They prepare the enablement of a PCCT generator.
Also add the CmObjParsers associated to each object.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The second model of the _PRT object is used. Indeed:
- the interrupts described are not re-configurable
- OSes are aware of the polarity of PCI legacy interrupts,
so there is no need to accurately describe the polarity.
Also, fix a comment for the CM_ARM_PCI_INTERRUPT_MAP_INFO obj.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 13136cc311 ("DynamicTablesPkg: FdtHwInfoParserLib:
Parse Pmu info")
adds support for pmu parsing. Thus, remove the wrong comment.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 691c5f7762 ("DynamicTablesPkg: Deprecate Crs specific methods
in AmlLib")
deprecates some APIs. Finally remove them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add missing fields to the following CmObjParser objects:
- EArmObjGicDInfo
- EArmObjCacheInfo
and fix wrong formatting of:
- EArmObjLpiInfo
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The CmObjParsers of the following objects was inverted, probably
due to a wrong ordering placement in the file defining the structures:
-EArmObjGTBlockTimerFrameInfo
-EArmObjPlatformGTBlockInfo
Assign the correct parser for each object, and re-order the
structures in the file defining them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit 0d23c447d6 ("DynamicTablesPkg: Add support to specify FADT
minor revision")
adds new 'MinorRevision' field to CM_STD_OBJ_ACPI_TABLE_INFO.
Reflect the change in this patch to the CmObjectParser.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
commit de200b7e2c ("DynamicTablesPkg: Update ArmNameSpaceObjects for
IORT Rev E.d")
adds new CmObj structures and fields to the ArmNameSpaceObjects.
Update the CmObjectParser accordingly.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add a PrintString to print strings in the CmObjParser.
String must be NULL terminated and no buffer overrun check
is done by this function.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In C, the 'long long' types are 64-bits. The 'll' printf length
specifier should be used to pring these values. Just '%x' allows to
print values that are on 16-bits or more. Use that instead.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=4100
ScsiDiskDxe driver updates ControllerNameTable with common string
"SCSI Disk Device" for all SCSI disks. Due to this, when multiple
SCSI disk devices connected, facing difficulty in identifying correct SCSI
disk device. As per SCSI spec, standard Inquiry Data is having the fields
to know Vendor and Product information. Updated "ControllerNameTable" with
Vendor and Product information. So that, device specific name can be
retrieved using ComponentName protocol.
Cc: Vasudevan Sambandan <vasudevans@ami.com>
Cc: Sundaresan Selvaraj <sundaresans@ami.com>
Signed-off-by: Cheripally Gopi <gopic@ami.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Disable/Restore HpetTimer before and after running the Dxe
CpuExceptionHandlerLib unit test module. During the UnitTest, a
new Idt is initialized for the test. There is no handler for timer
intrrupt in this new idt. After the test module, HpetTimer does
not work any more since the comparator value register and main
counter value register for timer does not match. To fix this issue,
disable/restore HpetTimer before and after Unit Test if HpetTimer
driver has been dispatched. We don't need to send Apic Eoi in this
unit test module.When disabling timer, after RaiseTPL(), if there
is a pending timer interrupt, bit64 of Interrupt Request Register
(IRR) will be set to 1 to indicate there is a pending timer
interrupt. After RestoreTPL(), CPU will handle the pending
interrupt in IRR.Then TimerInterruptHandler calls SendApicEoi().
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Migrate to the virt specific NOR flash driver as the ArmPlatformPkg is
going away.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Switch to the virt specific NorFlashDxe driver implementation that was
added recently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
NOR flash emulation under KVM involves switching between two modes,
where array mode is backed by a read-only memslot, and programming mode
is fully emulated, i.e., the memory region is not backed by anything,
and the faulting accesses are forwarded to the VMM by the hypervisor,
which translates them into NOR flash programming commands.
Normally, we are limited to the use of device attributes when mapping
such regions, given that the programming mode has MMIO semantics.
However, when running under KVM, the chosen memory attributes only take
effect when in array mode, since no memory mapping exists otherwise.
This means we can tune the memory mapping so it behaves a bit more like
a ROM, by switching to EFI_MEMORY_WC attributes. This means we no longer
need a special CopyMem() implementation that avoids unaligned accesses
at all cost.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Currently, when dealing with small updates that can be written out
directly (i.e., if they only involve clearing bits and not setting bits,
as the latter requires a block level erase), we iterate over the data
one word at a time, read the old value, compare it, write the new value,
and repeat, unless we encountered a value that we cannot write (0->1
transition), in which case we fall back to a block level operation.
This is inefficient for two reasons:
- reading and writing a word at a time involves switching between array
and programming mode for every word of data, which is
disproportionately costly when running under KVM;
- we end up writing some data twice, as we may not notice that a block
erase is needed until after some data has been written to flash.
So replace this sequence with a single read of up to twice the buffered
write maximum size, followed by one or two buffered writes if the data
can be written directly. Otherwise, fall back to the existing block
level sequence, but without writing out part of the data twice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
NorFlashWriteSingleWord() switches into programming mode and back into
array mode for every single word that it writes. Under KVM, this
involves tearing down the read-only memslot, and setting it up again,
which is costly and unnecessary.
Instead, move the array mode switch into the callers, and only make the
switch when the writing is done.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
We never boot from NOR flash, and generally rely on the firmware volume
PI protocols to expose the contents. So drop the block I/O protocol
implementation from VirtNorFlashDxe.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
We only use NOR flash for firmware volumes, either for executable images
or for the variable store. So we have no need for exposing disk I/O on
top of the NOR flash partitions so let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
We inherited a feature from the ArmPlatformPkg version of this driver
that never gets enabled. Let's remove it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
QEMU's mach-virt is loosely based on ARM Versatile Express, and inherits
its NOR flash driver, which is now being used on other QEMU emulated
architectures as well.
In order to permit ourselves the freedom to optimize this driver for
use under KVM emulation, let's clone it into OvmfPkg, so we have a
version we can hack without the risk of regressing bare metal platforms.
The cloned version is mostly identical to the original, but it depends
on the newly added VirtNorFlashPlatformLib library class instead of the
original one from ArmPlatformPkg. Beyond that, only cosmetic changes
related to #include order etc were made.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Create a new library class in Ovmf that duplicates the existing
NorFlashPlatformLib, but which will be tied to the VirtNorFlashDxe
driver that will be introduced in a subsequent patch. This allows us to
retire the original from ArmPlatformPkg.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Clang does not support undoing the effects of -mstrict-align by passing
the -mno-strict-align counterpart, so appending the latter to the
compiler's XIPFLAGS does not work. Instead, clear the flags entirely.
This also removes -mgeneral-regs-only, but this is fine - we can
tolerate SIMD codegen in PEIMs or BASE libraries as they run with the
MMU and caches enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The TPM discovery code relies on a dynamic PCD to communicate the TPM
base address to other components. But no other code relies on dynamic
PCDs in the PEI phase so let's drop the PCD PEIM when TPM support is not
enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Due to the way we inherited the formerly fixed PCDs to describe the
system memory base and size from ArmPlatformPkg, we ended up with a
MemoryInit PEIM that relies on dynamic PCDs to communicate the size of
system memory between the constructor of one of its library dependencies
and the core module. This is unnecessary, and forces us to incorporate
the PCD PEIM as well, for no good reason. So instead, let's use a HOB.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Some PEIMs register for shadow execution explicitly, but others exist
that don't care and can happily execute in place. Since the emulated NOR
flash is just RAM, shadowing has no performance benefits so let's only
do this if needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The variable PEIM is included in the build but its runtime prerequisites
are absent so it is never dispatched. Just drop it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that we have all the pieces in place, switch the AArch64 version of
ArmVirtQemu to a mode where the first thing it does out of reset is
enable a preliminary ID map that covers the NOR flash and sufficient
DRAM to create the UEFI page tables as usual.
The advantage of this is that no manipulation of memory occurs any
longer before the MMU is enabled, which removes the need for explicit
coherency management, which is cumbersome and bad for performance.
It also means we no longer need to build all components that may execute
with the MMU off (including BASE libraries) with strict alignment.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
In order to allow booting with the MMU and caches enabled really early,
we need to ensure that the code that populates the page tables can
access those page tables with the statically defined ID map active.
So let's put the permanent PEI RAM in the first 128 MiB of memory, which
we will cover with this initial ID map (as it is the minimum supported
DRAM size for ArmVirtQemu).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
To substantially reduce the amount of processing that takes place with
the MMU and caches off, implement a version of ArmPlatformLib specific
for QEMU/mach-virt in AArch64 mode that carries a statically allocated
and populated ID map that covers the NOR flash and device region, and
128 MiB of DRAM at the base of memory (0x4000_0000).
Note that 128 MiB has always been the minimum amount of DRAM we support
for this configuration, and the existing code already ASSERT()s in DEBUG
mode when booting with less.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use the appropriate PCD definition in the ArmVirtQemu DSC so that the
boot timeout is taken from the Timeout variable automatically, which is
what Linux tools such as efibootmgr expect.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When the memory protections were implemented and enabled on ArmVirtQemu
5+ years ago, we had to work around the fact that GRUB at the time
expected EFI_LOADER_DATA to be executable, as that is the memory type it
allocates when loading its modules.
This has been fixed in GRUB in August 2017, so by now, we should be able
to tighten this, and remove execute permissions from EFI_LOADER_DATA
allocations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Recent model Chromebooks only return ACK, but not
BAT_SUCCESS, which causes hanging and failed ps2k init.
To mitigate this, make the absence of BAT_SUCCESS reply
non-fatal, and reduce the no-reply timeout from 4s to 1s.
Tested on google/dracia and purism/librem_14
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Some platforms may set up a preliminary ID map in flash and enter EFI
with the MMU and caches enabled, as this removes a lot of the complexity
around cache coherency. Let's take this into account, and avoid touching
the MMU controls or perform cache invalidation when the MMU is enabled
at entry.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The iSCSI driver slows down the boot on a pristine variable store flash
image, as it creates a couple of large EFI non-volatile variables to
preserve state between boots.
Since iSCSI boot for VMs is kind of niche anyway, let's default to
disabled. If someone needs it in their build, they can use the -D build
command option to re-enable it on the fly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
The EBC interpreter is rarely, if ever, used on ARM, and is especially
pointless on virtual machines. So let's drop it from the builds.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Commit ("2355f0c09c52 BaseTools: Fix check for ${PYTHON_COMMAND} in
Tests/GNUmakefile") fixed a latent issue in the BaseTools/Tests
Makefile, but inadvertently broke the BaseTools build for cases where
PYTHON_COMMAND is not set. As it turns out, running 'command' without a
command argument makes the invocation succeed, causing the empty
variable to be evaluated and called later.
Let's put double quotes around PYTHON_COMMAND in the invocation of
'command' and force it to fail when PYTHON_COMMAND is not set.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Update OpensslLib INF files to match results from running
process_files.pl to auto-generate the INF files.
* OpensslLib.inf
* OpensslLibAccel.inf
* OpensslLibCrypto.inf
* OpensslLibFull.inf
* OpensslLibFullAccel.inf
These INF files are generated by running the following
perl scripts:
* process_files.pl
* process_files.pl X64
* process_files.pl X64Gcc
* process_files.pl IA32
* process_files.pl IA32Gcc
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Christopher Zurcher <christopher.zurcher@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* Build host-based tests using OpensslLib instance with all services
enabled.
* Build host-based tests using performance optimized OpensslLib instance
with all services enabled.
* Remove unused PCD gEfiCryptoPkgTokenSpaceGuid.PcdOpensslEcEnabled
* Remove redundant and unnecessary [BuildOptions]
* Limit host-based unit tests to only IA32/X64
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Christopher Zurcher <christopher.zurcher@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
With the addition of EC services and performance optimized versions
of the OpensslLib for IA32/X64, the CryptoPkg.dsc file is updated
to make sure all combinations are covered in CI builds.
* Use different output directory for each CRYPTO_SERVICES profile.
* Add FILE_GUID define names for CryptoPei, CryptoDxe, and CryptoSmm
when they are linked with different OpensslLib instances.
* Update CryptoPei, CryptoDxe, CryptoSmm builds to include all
combinations of OpensslLib library instances supported by each
CPU architecture.
* Add TARGET_UINT_TESTS profile to CryptoPkg.dsc to build only
the target-based unit tests. This reduces the size of CryptoPkg
components not related to unit testing by removing unit test
specific assert handlers. Build target-based unit tests using
OpensslLibFull.inf and OpensslLibFullAccel.inf.
* Remove the PACKAGE profile and instead make the ALL profile
the default for CI testing that enables all services for all
modules.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Christopher Zurcher <christopher.zurcher@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update all OpensslLib instances so they produce all the APIs used
by the BaseCryptLib instances. Not producing the same set of APIs
for a library class does not follow the EDK II library class rules
and breaks the assumptions that consumers of the OpensslLib may
make about which services are present.
* Add missing declaration of the private library class OpensslLib
to CryptoPkg.dec.
* Add SslNull.c with NULL implementations of SSL functions
* Add EcSm2Null.c with NULL implementations of EC/SM2 functions.
* Update OpensslLibCrypto.inf to include both SslNull.c and
EcSm2Null.c so this library instance produces all the opensll
APIs used by the BaseCryptLib instances.
* Update OpensslLib.inf and OpensslLibAccel.inf to include
EcSm2Null.c so these library instances produce all the opensll
APIs used by the BaseCryptLib instances.
* Add missing declaration of the private library class IntrinsicLib
to CryptoPkg.dec
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Christopher Zurcher <christopher.zurcher@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* Remove IA32/X64 specific INF files for performance
optimized OpensslLib and combine into OpensslLibAccel.inf
and OpensslLibFullAccel.inf.
* Remove use of PcdOpensslEcEnabled and let the platform
select the EC feature by using either OpensslLibFull.inf
or OpensslLibFullAccel.inf.
* With PcdOpensslEcEnabled removed, roll back style of opensslconf.h
and remove opensslconf_generated.h. Move the choice to disable
EC/SM2 into OpensslLib INF files using OPENSSL_FLAGS define.
* Update OpensslLibContructor() API to be compatible with all
FW phases by using types from Base.h and using RETURN_STATUS
type and values instead of EFI_STATUS type and values.
* Add /wd4718 to VS2015x86 for IA32 and X64 to disable warning
for recursive call with no side effects. This is a false
positive warning that is not produced with VS2017 or VS2019.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Christopher Zurcher <christopher.zurcher@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* Move SysCall/inet_pton.c from BaseCryptLib to TlsLib. The functions
in this file are only used by TlsLib instances and not any CryptLib
instances.
* Fix type mismatch in call to FreePool() in TlsConfig.c
* Remove use of gEfiCryptoPkgTokenSpaceGuid.PcdOpensslEcEnabled from
TslLib and CryptLib instances
* Add missing *Null.c files to SecCryptLib.inf and RuntimeCryptLib.inf.
* Remove ARM and AARCH64 sections from SmmCryptLib.inf that does not
support those architectures.
* Add missing PrintLib dependencies to [LibraryClasses] sections of
CryptLib INF files
* Remove extra library classes from [LibraryClasses] sections of
CryptLib INF files
* Remove unnecessary warning disables from [BuildOptions] sections of
TlsLib and CryptLib INF files
* Remove RVCT support from SecCryptLib.inf
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Christopher Zurcher <christopher.zurcher@microsoft.com>
Cc: Rebecca Cran <quic_rcran@quicinc.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
* Update ImageTimeStampTest to return UNIT_TEST_PASSED instead of
Status. On success Status is TRUE(1), which was returning a unit
test status of UNIT_TEST_ERROR_PREREQUISITE_NOT_MET.
* Update HmacTests to use the *Free() service from the HMAC family
instead of FreePool(). Using FreePool() generates ASSERT() because
the context being freed was not allocated using AllocatePool().
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Christopher Zurcher <christopher.zurcher@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Fix gcc: warning:
-x c after last input file has no effect
These kind of flag can only affect the source code after them.
For the build command in build_rule.template, we have no other source code or object after these two flag.
It seems we don't need them here.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: JessyX Wu <jessyx.wu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
When checking if $PYTHON_COMMAND exists, curly braces should
be used instead of parentheses.
Also, "1" causes an error on FreeBSD: it's likely supposed to
be 2>&1 like other scripts.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The syntax for Makefiles requires that indented lines s
tart with a tab, but not a space.
This change of PatchCheck.py make the patch for Makefile/GNUmakefile
pass the PatchCheck.py.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
According the Xhci Spec, TRB Rings may be larger than a Page, however they
shall not cross a 64K byte boundary, so add a parameter to indicate
whether the memory allocation is for TRB Rings or not. It will ensure the
allocation not crossing 64K boundary in UsbHcAllocMemFromBlock if the
memory is allocated for TRB Rings.
Signed-off-by: jdzhang <jdzhang@kunluntech.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
In order to reduce the likelihood that we will need to rely on the logic
that disables and re-enables the MMU for updating a page table entry
safely, expose the XIP version of the helper routine via a HOB and use
it instead of the one that is copied into DRAM. Since the XIP copy is
already clean to the PoC, and will never end up getting unmapped during
a block entry split, we can use it safely without any cache maintenance,
and without running the risk of pulling the rug from under our feet when
updating an entry by going through an invalid mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Permit the use of this library with the MMU and caches already enabled.
This removes the need for any cache maintenance for coherency, and is
generally better for robustness and performance, especially when running
under virtualization.
Note that this means we have to defer assignment of TTBR0 until the
page tables are ready to be used, and so UpdateRegionMapping() can no
longer read back TTBR0 directly to discover the root table address.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
When updating a page table descriptor in a way that requires break
before make, we temporarily disable the MMU to ensure that we don't
unmap the memory region that the code itself is executing from.
However, this is a condition we can check in a straight-forward manner,
and if the regions are disjoint, we don't have to bother with the MMU
controls, and we can just perform an ordinary break before make.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Drop the optimization that replaces table entries with block entries and
frees the page tables in the subhierarchy that is being replaced. This
rarely occurs in practice anyway, and will require more elaborate TLB
maintenance once we switch to a different approach where we no longer
disable the MMU and nuke the TLB entirely every time we update a
descriptor in a way that requires break-before-make (BBM).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Currently the PCD values calculated from the expressions have different
formating from the simple byte arrays in AutoGenC.
Example:
The following definition in DEC:
gTokenSpaceGuid.PcdArray|{0x44, 0x33, 0x22, 0x11}|VOID*|0x55555555
gTokenSpaceGuid.PcdArrayByExpression|{UINT32(0x11223344)}|VOID*|0x66666666
Produces these strings in AutoGenC:
<...> _gPcd_<...>_PcdArray[4] = {0x44, 0x33, 0x22, 0x11};
<...> _gPcd_<...>_PcdArrayByExpression[4] = {0x44,0x33,0x22,0x11};
Add missing space character between the array elements to unify PCD value
formatting.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently it is not possible to initialize all elements in the
array PCD.
For example, this PCD would result to a build failure:
gTokenSpaceGuid.PcdArray|{0x11, 0x22}|UINT8[2]|0x4C4CB9A3
Correct logical operator in the initialization data size checks to
fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Corrently the set of file types for the PIC section contains two
duplicate values.
Replace the duplicate value with the correct one to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently COMPAT16 section type is not recognized and GenSec is called
without the "-s [SectionType]" argument.
Add COMPAT16 type to the SectionType dictionary to fix the issue.
Now this syntax works correctly:
```
FILE FREEFORM = <GUID> {
SECTION COMPAT16 = <FILE>
}
```
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
EFI_SECTION_FREEFORM_SUBTYPE_GUID is a leaf section type that contains
a single EFI_GUID in the header to describe the raw data.
Currently is is not possible to generate such section.
This patch adds initial support for the generation of such sections.
The added syntax for this type of section corresponds to EDKII
"[FV] section" documentation from the FDF Specification:
```
SECTION SUBTYPE_GUID <GUID> = <File>
```
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Popen communication returns bytestrings. It is necessary to perform
decode on these strings before passing them to the EdkLogger that
works with ordinary strings.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The code changes add unit tests based on current UnitTestFramework.
EdkiiPeiMpServices2PpiPeiUnitTest PEI module is used to test
EdkiiPeiMpServices2Ppi and EfiMpServiceProtocolDxeUnitTest DXE driver is
used to test EfiMpServiceProtocol.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Add GENERAL_REGISTER.R8/R9 etc in EccCheck ExceptionList
of UefiCpuPkg/UefiCpuPkg.ci.yaml to pass CI EccCheck.R8/R9
in structure GENERAL_REGISTER of CpuExceptionHandlerTest.h
lead to EccCheck failure since no lower case characters in
R8/R9/R10 etc.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
The previous change adds unit test for DxeCpuExeptionHandlerLib
in 64bit mode. This change create a PEIM to add unit test for
PeiCpuExceptionHandlerLib based on previous change.It can run
in both 32bit and 64bit modes.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Add target based unit tests for the DxeCpuExceptionHandlerLib.
A DXE driver is created to test DxeCpuExceptionHandlerLib.
Four test cases are created in this Unit Test module:
a.Test if exception handler can be registered/unregistered
for no error code exception.In the test case, only no error
code exception is triggered and tested by INTn instruction.
b.Test if exception handler can be registered/unregistered
for GP and PF. In the test case, GP exception is triggered
and tested by setting CR4_RESERVED_BIT to 1. PF exception
is triggered by writting to not-present or RO address.
c.Test if CpuContext is consistent before and after exception.
In this test case:
1.Set Cpu register to mExpectedContextInHandler before
exception. 2.Trigger exception specified by ExceptionType.
3.Store SystemContext in mActualContextInHandler and set
SystemContext to mExpectedContextAfterException in handler.
4.After return from exception, store Cpu registers in
mActualContextAfterException.
The expectation is:
1.Register values in mActualContextInHandler are the same
with register values in mExpectedContextInHandler.
2.Register values in mActualContextAfterException are the
same with register values mActualContextAfterException.
d.Test if stack overflow can be captured by CpuStackGuard
in both Bsp and AP. In this test case, stack overflow is
triggered by a funtion which calls itself continuously.
This test case triggers stack overflow in both BSP and AP.
All AP use same Idt with Bsp. The expectation is:
1. PF exception is triggered (leading to a DF if sepereated
stack is not prepared for PF) when Rsp<=StackBase+SIZE_4KB
since [StackBase, StackBase + SIZE_4KB] is marked as not
present in page table when PcdCpuStackGuard is TRUE.
2. Stack for PF/DF exception handler in both Bsp and AP is
succussfully switched by InitializeSeparateExceptionStacks.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
If a device which support both features SR-IOV/ARI has multi
functions, which maybe support 8-255. After enable ARI forwarding in
the root port and ARI Capable Hierarchy in the SR-IOV PF0.
The device will support and expose multi functions(0-255) with ARI ID routing.
In next device loop in below for() code, actually it still be in the
same SR-IOV device, and just some PF which is over 8 or higher
one(n*8), PciAllocateBusNumber() will allocate bus
number(ReservedBusNum - TempReservedBusNum)) for this PF. if reset
TempReservedBusNum as 0 in this case,it will allocate wrong bus number
for this PF because TempReservedBusNum should be total previous PF's
reserved bus numbers.
code:
for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) {
TempReservedBusNum = 0;
for (Func = 0; Func <= PCI_MAX_FUNC; Func++) {
//
// Check to see whether a pci device is present
//
Status = PciDevicePresent (
PciRootBridgeIo,
&Pci,
StartBusNumber,
Device,
Func
);
...
Status = PciAllocateBusNumber (PciDevice, *SubBusNumber,
(UINT8)(PciDevice->ReservedBusNum - TempReservedBusNum), SubBusNumber);
The solution is add a new flag IsAriEnabled to help handle this case.
if ARI is enabled, then TempReservedBusNum will not be reset again
during all functions(1-255) scan with checking flag IsAriEnabled.
Signed-off-by: Foster Nong <foster.nong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Below code will calculate the reserved bus number for the each PF.
Based on the VF routing ID algorithm, PFRid and LastVF in below code
already sure that "All VFs and PFs must have distinct Routing IDs".
PF will be assigned Routing ID based on secBusNumber, ReservedBusNum
will add into SubBusNumber directly. So the SR-IOV device will be
assigned bus range as SecBusNumber ~ (SubBusNumber=(SecBusNumber +
ReservedBusNum)).
Thus "+1" in below code will cause extra 1 bus, and introduce a bus hole.
PFRid = EFI_PCI_RID (Bus, Device, Func);
LastVF = PFRid + FirstVFOffset + (PciIoDevice->InitialVFs - 1) * VFStride;
PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) -
Bus + 1);
In SR-IOV spec, there is a note in section 2.1.2:
Note: Bus Numbers are a constrained resource. Devices are strongly
encouraged to avoid leaving ?holes? in their Bus Number usage to avoid
wasting Bus Numbers
So the issue can be fixed with below code change.
PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) -
Bus);
https://bugzilla.tianocore.org/show_bug.cgi?id=4069
Signed-off-by: Foster Nong <foster.nong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Per the UEFI specification, a device driver implementation should return
EFI_UNSUPPORTED if the ChildHandle argument in
EFI_COMPONENT_NAME2_PROTOCOL.GetControllerName() is not NULL.
Signed-off-by: Dimitrije Pavlov <Dimitrije.Pavlov@arm.com>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3892
1. TlsSetSignatureAlgoList(): Configure the list of TLS signature algorithms
that should be used as part of the TLS session establishment.
This is needed for some WLAN Supplicant connection establishment flows
that allow only specific TLS signature algorithms to be used, e.g.,
Authenticate and Key Managmenet (AKM) suites that are SUITE-B compliant.
2. TlsSetEcCurve(): Configure the Elliptic Curve that should be used for
TLS flows the use cipher suite with EC,
e.g., TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384.
This is needed for some WLAN Supplicant connection establishment flows
that allow only specific TLS signature algorithms to be used,
e.g., Authenticate and Key Managmenet (AKM) suites that are SUITE-B compliant.
3. TlsShutdown():
Shutdown the TLS connection without releasing the resources,
meaning a new connection can be started without calling TlsNew() and
without setting certificates etc.
4. TlsGetExportKey(): Derive keying material from a TLS connection using the
mechanism described in RFC 5705 and export the key material (needed
by EAP methods such as EAP-TTLS and EAP-PEAP).
5. TlsSetHostPrivateKeyEx(): This function adds the local private key
(PEM-encoded or PKCS#8 or DER-encoded private key) into the specified
TLS object for TLS negotiation. There is already a similar function
TlsSetHostPrivateKey(), the new Ex function introduces a new parameter
Password, set Password to NULL when useless.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Per the section 3.3.5 SR-IOV spec v1.1, InitialVFs (0ch).
InitialVFs indicates to SR-PCIM the number of VFs that are initially associated with the PF.
The minimum value of InitialVFs is 0.
Below code is used to calculate SR-IOV reserved bus number,
if InitialVFs =0, it maybe calculate the wrong bus number in this case.
LastVF = PFRid + FirstVFOffset + (PciIoDevice->InitialVFs - 1) * VFStride
we can fix it with below code:
if (PciIoDevice->InitialVFs == 0) {
PciIoDevice->ReservedBusNum = 0;
} else {
PFRid = EFI_PCI_RID (Bus, Device, Func);
LastVF = PFRid + FirstVFOffset + (PciIoDevice->InitialVFs - 1) * VFStride;
//
// Calculate ReservedBusNum for this PF
//
PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) - Bus + 1);
//
// Calculate ReservedBusNum for this PF
//
PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) - Bus + 1);
}
https://bugzilla.tianocore.org/show_bug.cgi?id=4069
Signed-off-by: Foster Nong <foster.nong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is a code optimization to allow bigger seperate stack size in
ArchSetupExceptionStack. In previous code logic, CPU_STACK_ALIGNMENT bytes
will be wasted if StackTop is already CPU_STACK_ALIGNMENT aligned.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
While the actual implementation (using qemu fw_cfg) is qemu-specific,
the idea to store the boot order as configured by the VMM in EFI
variables is not. So lets give the variables a more neutral name while
we still can (i.e. no stable tag yet with the new feature).
While being at it also fix the NNNN format (use %x instead of %d for
consistency with BootNNNN).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This reverts commit 60d55c4156.
Now that we have stateless secure boot support (which doesn't
need SMM) in OVMF we can enable the build option for MicroVM.
Bring it back by reverting the commit removing it.
Also add the new PlatformPKProtectionLib.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Compiler flag is needed to make (stateless) secure boot be actually
secure, i.e. restore EFI variables from ROM on reset.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
In case the 64-bit pci mmio window is larger than the default size
of 32G be generous and hand out larger chunks of address space for
prefetchable mmio bridge windows.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In case we have a reliable PhysMemAddressWidth use that to dynamically
size the 64bit address window. Allocate 1/8 of the physical address
space and place the window at the upper end of the address space.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Try detect physical address space, when successful use it.
Otherwise go continue using the current guesswork code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add some qemu specific quirks to PlatformAddressWidthFromCpuid()
to figure whenever the PhysBits value returned by CPUID is
something real we can work with or not.
See the source code comment for details on the logic.
Also apply some limits to the address space we are going to use:
* Place a hard cap at 47 PhysBits (128 TB) to avoid using addresses
which require 5-level paging support.
* Cap at 40 PhysBits (1 TB) in case the CPU has no support for
gigabyte pages, to avoid excessive amounts of pages being
used for page tables.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Change SMM to MM in naming according to the recent PI specifications.
Remove trailing whitespaces in some strings.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The current string lenght (=60) is not enough for cases where basename
is a path to Build folder.
Drop custom define and use MAX_LINE_LEN from the BaseTools codebase
instead.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently 'PutFileImage' function is called with arguments that are
not advanced on each section parsing. This would lead to an error if
EFI_SECTION_GUID_DEFINED is not the first in a file.
The same mistake is present in the parsing of CRC32 guided section
case.
Use correct arguments to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If the guided section was encoded with GenCrc32 tool the resulting
'EFI_GUID_DEFINED_SECTION.DataOffset' field points to the start of
the meaningfull data that follows the CRC32 value.
But if we want to decode the section with GenCrc32 tool we need to
provide a buffer that includes the CRC32 value itself.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add support for partial free of non cached buffers.
If a request for less than the full size is requested new allocations
for the remaining head and tail of the buffer are added to the list.
Added verification that Buffer is EFI_PAGE_SIZE aligned.
The XHCI driver does this if the page size for the controller is >4KB.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
When finding an unsupported entry just skip over and continue
with the next entry instead of stop processing altogether.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
See comment for details. Needed to avoid the parser abort,
so we can continue parsing the bootorder fw_cfg file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Traditional q35 memory layout is 2.75 GB of low memory, leaving room
for the pcie mmconfig at 0xb0000000 and the 32-bit pci mmio window at
0xc0000000. Because of that OVMF tags the memory range above
0xb0000000 as uncachable via mtrr.
A while ago qemu started to gigabyte-align memory by default (to make
huge pages more effective) and q35 uses only 2G of low memory in that
case. Which effectively makes the 32-bit pci mmio window start at
0x80000000.
This patch updates the mtrr setup code accordingly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Update check for enough space to occur prior to alignment offset.
This prevents cases where EfiFreeMemoryTop < EfiFreeMemoryBottom.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
_CPC entries can describe CPU performance information.
The object is described in ACPI 6.4 s8.4.7.1.
"_CPC (Continuous Performance Control)".
Add AmlCreateCpcNode() helper function to add _CPC entries to an
existing CPU object.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Introduce the CM_ARM_CPC_INFO CmObj in the ArmNameSpaceObjects.
This allows to describe CPC information, as described in ACPI 6.4,
s8.4.7.1 "_CPC (Continuous Performance Control)".
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In some scenarios, the information of Bios Version, Bios Release
and Embedded Controller Firmware Release are fetched during UEFI
booting. This patch supports updating those fields dynamically
when the PCDs are empty.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
According to "SMC Calling Convention" specification, section 7.4,
return value of Arm Architecture Calls is stored at first argument of
SMC aguments (ARM_SMC_ARGS). This value can be negative values indicating
error or positive values (including zero) indicating success. Positive
value would contain information of respective Function ID (Section 7.3.4
and 7.4.4).
For that reason, "SMCCC_VERSION" and "SMCCC_ARCH_FEATURES"
Function ID calls read return value from "SmcCallStatus" variable
(Args.Arg0 - first argument of SMC call). But "SMCCC_ARCH_SOC_ID"
Function ID call is reading return value from "SmcParam" variable
(Args.Arg1 - second argument of SMC call) so it leads to unexpected
results of "Jep106Code" and "SocRevision". This patch is to correct it.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
In some scenarios, the processor version may be updated dynamically
from pre-UEFI firmware during booting. But the processor version is
fixed with PCD (PcdProcessorVersion), so it can not be updated it
dynamically. This patch will support setting that value both
statically and dynamically.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Current implementation of looking up toolchain will _insert_ the findings
from vsvarsall.bat to existing path and potentially stuff the variable to
exceed the length of maximal path length accepted by Windows.
This change updated the logic to use the discovered shell varialbes to
replace the existing path, which is desirable in the specific use case.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Co-authored-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add support for selecting to use index or segment number as UID and name.
This allows the path of the nodes to be well known.
For example, if the PCIe node needs to be notified from by an interrupt
for a Generic Event Device
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4011
AHCI commands are retried internally which prevents platform feature
like drive password to process correctly entered password on subsequent
attempts. PCD allows the platform to determine the number of retries.
Signed-off-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Wire up the newly added UefiDriverEntrypoint in a way that ties dispatch
of the Ip4Dxe and Ip6Dxe drivers to QEMU fw_cfg variables
'opt/org.tianocore/IPv4Support' and 'opt/org.tianocore/IPv6Support'
respectively.
Setting both variables to 'n' disables IP based networking entirely,
without the need for additional code changes at the NIC driver or
network boot protocol level.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
All QEMU based OVMF platforms override the same set of network
components, to specify NULL library class resolutions that modify the
behavior of those components in a QEMU specific way.
Before adding more occurrences of that, let's drop those definitions in
a common include file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new library that can be incorporated into any driver built from
source, and which permits loading of the driver to be inhibited based on
the value of a QEMU fw_cfg boolean variable. This will be used in a
subsequent patch to allow dispatch of the IPv4 and IPv6 network protocol
driver to be controlled from the QEMU command line.
This approach is based on the notion that all UEFI and DXE drivers share
a single UefiDriverEntryPoint implementation, which we can easily swap
out at build time with one that will abort execution based on the value
of some QEMU fw_cfg variable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Don't allow spelling errors to break the CI build and inadvertently
reject pull requests - spelling is important but not that important.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This debug macro should take one argument based on the number of
print specifiers defined. However, two arguments are given.
It looks like the code may have been refactored such that the
second argument was moved to a new print and this argument was
not removed. In any case, it should not be there now.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
These debug messages are repeated in both NorFlashBlockIoReadBlocks()
and NorFlashBlockIoWriteBlocks():
"NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x"
"bytes (%d kB), BufferPtr @ 0x%08x)\n"
Although this requires 5 arguments, only 4 are provided. The kilobyte
value was never given.
This change removes that specifier so the 4 arguments match the 4
specifiers in the debug macro.
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Rebecca reports that builds of AArch64 DSCs that involve PIE linking
when using ELF based toolchains are failing in some cases, resulting in
an error message like
bad definition for symbol '_GLOBAL_OFFSET_TABLE_'@0x72d8 or
unsupported symbol type. For example, absolute and undefined symbols
are not supported.
The reason turns out to be that, while GenFw does carry some logic to
convert GOT based symbol references into direct ones (which is always
possible given that our ELF to PE/COFF conversion only supports fully
linked executables), it does not support all possible combinations of
relocations that the linker may emit to load symbol addresses from the
GOT.
In particular, when performing a non-LTO link on object code built with
GCC using -fpie, we may end up with GOT based references such as the one
below, where the address of the GOT itself is taken, and the offset of
the symbol in the GOT is reflected in the immediate offset of the
subsequent LDR instruction.
838: adrp x0, 16000
838: R_AARCH64_ADR_PREL_PG_HI21 _GLOBAL_OFFSET_TABLE_
83c: ldr x0, [x0, #2536]
83c: R_AARCH64_LD64_GOTPAGE_LO15 _gPcd_BinaryPatch_PcdFdBaseAddress
The reason that we omit GOT based symbol references when performing ELF to
PE/COFF conversion is that the GOT is not described by static ELF
relocations, which means that the ELF file lacks the metadata to
generate the PE/COFF relocations covering the GOT table in the PE/COFF
executable. Given that none of the usual motivations for using a GOT
(copy on write footprint, shared libraries) apply to EFI executables in
the first place, the easiest way around this is to convert all GOT based
symbol address loads to PC relative ADR/ADRP instructions.
So implement this handling for R_AARCH64_LD64_GOTPAGE_LO15 and
R_AARCH64_LD64_GOTOFF_LO15 relocations as well, and turn the LDR
instructions in question into ADR instructions that generate the
address immediately.
This leaves the reference to _GLOBAL_OFFSET_TABLE_ itself, which is what
generated the error to begin with. Considering that this symbol is never
referenced (i.e., it doesn't appear anywhere in the code) and is only
meaningful in combination with R_*_GOT_* based relocations that follow
it, we can just disregard any references to it entirely, given that we
convert all of those followup relocations into direct references.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
Both ACPI shutdown and ACPI PM timer devices has been moved to different
port addresses in the latest version of Cloud Hypervisor. These changes
need to be reflected on the OVMF firmware.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add VgaInb() helper function to read vga registers. With that in place
fix the unblanking. We need to put the ATT_ADDRESS_REGISTER flip flop
into a known state, which is done by reading the
INPUT_STATUS_1_REGISTER. Reading the INPUT_STATUS_1_REGISTER only works
when the device is in color mode, so make sure that bit (0x01) is set in
MISC_OUTPUT_REGISTER.
Currently the mode setting works more by luck because
ATT_ADDRESS_REGISTER flip flop happens to be in the state we need.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
features and bug fixes:
1. Fix the incremental build issue on Linux @176016387f
2. Fix DSC LibraryClass precedence rule @039bdb4d3e
3. INF should use latest Pcd value instead of default value @a512913
4. Support signtool input subject name to sign capsule @594b795
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
The function reads the boot order from qemu fw_cfg, translates it into
device paths and stores them in 'QemuBootOrderNNNN' variables. In case
there is no boot ordering configured the function will do nothing.
Use case: Allow applications loaded via 'qemu -kernel bootloader.efi'
obey the boot order.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
As Cloud Hypervisor has its own PeiMemLib, change it in dsc file
accordingly.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Memory layout in CLoud Hypervisor for arm is changed and is different
with Qemu, thus we should build its own PeiMemInfoLib.
The main change in the memory layout is that normal ram may not contiguous
under 4G. The top 64M under 4G is reserved for 32bit device.
What this patch does:
1. get all of the memory node from DT;
2. Init page table for each memory node;
3. Add all of the memory nodes to Hob;
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
The current ACPI Reclaim memory size is set as 0x10 (64KiB). The ACPI
table size will be increased if the memory slots' number of the guest
gets increased. In the guest with more memory slots, the ACPI Reclaim
memory size may not be sufficient for hibernation. This may cause
resume failure of the hibernated guest that was booted up with a fresh
copied writable OVMF_VARS file. However, the failure doesn't happen in
following hibernation/resume cycles.
The ACPI_MAX_RAM_SLOTS is set as 256 in the current QEMU. With
ACPI_MAX_RAM_SLOTS, 18 pages are required to be allocated in ACPI
Reclaim memory. However, due to the 0x10 (16 pages) setting, 2 extra
pages will be allocated in other space. This may break the
hibernation/resume in the above scenario.
This patch increases the ACPI Reclaim memory size to 0x12, i.e.
PcdMemoryTypeEfiACPIReclaimMemory is set as 0x12 (18 pages).
Signed-off-by: Annie Li <annie.li@oracle.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reference: https://bugzilla.tianocore.org/show_bug.cgi?id=4031
This patch is similar to the c477b2783f patch for Td guest.
Host VMM may inject OptionRom which is untrusted in Sev guest. So PCI
OptionRom needs to be ignored if it is Sev guest. According to
"Table 20. ACPI 2.0 & 3.0 QWORD Address Space Descriptor Usage"
PI spec 1.7, type-specific flags can be set to 0 when Address
Translation Offset == 6 to skip device option ROM.
Without this patch, Sev guest may shows invalid MMIO opcode error
as following:
Invalid MMIO opcode (F6)
ASSERT /home/abuild/rpmbuild/BUILD/edk2-edk2-stable202202/OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c(1041): ((BOOLEAN)(0==1))
The OptionRom must be disabled both on Td and Sev guests, so we direct
use CcProbe().
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
BZ 4037:
Install EFI_DISCOVER_PROTOCOL on each network interface.
This fixes the issue that causes the high-level Redfish driver
on the network interface is stopped when:
1. EFI_DISCOVER_PROTOCOL is reinstalled on a new-found network
interface, or
2. EFI_DISCOVER_PROTOCOL is stopped on the network interface
other than the one which is used to communicate with Redfish
service.
Cc: Nickle Wang <nickle@csie.io>
Cc: Igor Kulchytskyy <igork@ami.com>
Signed-off-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Nickle Wang <nickle@csie.io>
Reviewed-by: Igor Kulchytskyy <igork@ami.com>
SECURE_BOOT_FEATURE_ENABLED is the build-flag defined when secure boot
is enabled. Currently this flag is used in below lib:
- OvmfPkg/PlatformPei
- PeilessStartupLib
So it is defined in below 5 .dsc
- OvmfPkg/CloudHv/CloudHvX64.dsc
- OvmfPkg/IntelTdx/IntelTdxX64.dsc
- OvmfPkg/OvmfPkgIa32.dsc
- OvmfPkg/OvmfPkgIa32X64.dsc
- OvmfPkg/OvmfPkgX64.dsc
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
EmuVariableNvStore is reserved and init with below 2 functions defined in
PlatformInitLib:
- PlatformReserveEmuVariableNvStore
- PlatformInitEmuVariableNvStore
PlatformInitEmuVariableNvStore works when secure boot feature is enabled.
This is because secure boot needs the EFI variables (PK/KEK/DB/DBX, etc)
and EmuVariableNvStore is cleared when OVMF is launched with -bios
parameter.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
ReserveEmuVariableNvStore is updated with below 2 functions defined in
PlatformInitLib:
- PlatformReserveEmuVariableNvStore
- PlatformInitEmuVariableNvStore
PlatformInitEmuVariableNvStore works when secure boot feature is enabled.
This is because secure boot needs the EFI variables (PK/KEK/DB/DBX, etc)
and EmuVariableNvStore is cleared when OVMF is launched with -bios
parameter.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
There are 3 functions added for EmuVariableNvStore:
- PlatformReserveEmuVariableNvStore
- PlatformInitEmuVariableNvStore
- PlatformValidateNvVarStore
PlatformReserveEmuVariableNvStore allocate storage for NV variables early
on so it will be at a consistent address.
PlatformInitEmuVariableNvStore copies the content in
PcdOvmfFlashNvStorageVariableBase to the storage allocated by
PlatformReserveEmuVariableNvStore. This is used in the case that OVMF is
launched with -bios parameter. Because in that situation UEFI variables
will be partially emulated, and non-volatile variables may lose their
contents after a reboot. This makes the secure boot feature not working.
PlatformValidateNvVarStore is renamed from TdxValidateCfv and it is used
to validate the integrity of FlashNvVarStore
(PcdOvmfFlashNvStorageVariableBase). It should be called before
PlatformInitEmuVariableNvStore is called to copy over the content.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
TdxValidateCfv is used to validate the integrity of FlashNvVarStore
(PcdOvmfFlashNvStorageVariableBase) and it is not Tdx specific.
So it will be moved to PlatformInitLib and be renamed to
PlatformValidateNvVarStore in the following patch. And it will be called
before EmuVaribleNvStore is initialized with the content in
FlashNvVarStore.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In previous implementation below Pci related PCDs were set based on the
ResourceDescriptor passed in TdHob.
- PcdPciMmio64Base / PcdPciMmio64Size
- PcdPciMmio32Base / PcdPciMmio32Size
- PcdPciIoBase / PcdPciIoSize
The PCDs will not be set if TdHob doesn't include these information. This
patch set the PCDs with the information initialized in PlatformInitLib
by default. Then TdxDxe will check the ResourceDescriptor in TdHob and
reset them if they're included.
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3974
CcProbeLib once was designed to probe the Confidential Computing guest
type by checking the PcdOvmfWorkArea. But this memory is allocated with
either EfiACPIMemoryNVS or EfiBootServicesData. It cannot be accessed
after ExitBootService. Please see the detailed analysis in BZ#3974.
To fix this issue, CcProbeLib is redesigned as 2 implementation:
- SecPeiCcProbeLib
- DxeCcProbeLib
In SecPeiCcProbeLib we check the CC guest type by reading the
PcdOvmfWorkArea. Because it is used in SEC / PEI and we don't worry about
the issues in BZ#3974.
In DxeCcProbeLib we cache the GuestType in Ovmf work area in a variable.
After that the Guest type is returned with the cached value. So that we
don't need to worry about the access to Ovmf work area after
ExitBootService.
The reason why we probe CC guest type in 2 different ways is the global
varialbe. Global variable cannot be used in SEC/PEI and CcProbe is called
very frequently.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The value of gTimeOut is from PcdGdbMaxPacketRetryCount, and this
PCD is UINT32. So change the declaratrion of gTimeOut to UINT32
to fix compile warning.
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Increase the maximum line length for debug messages.
While log messages should be short, they can still
get quite long, for example when printing device paths
or config strings in HII routing.
512 chars is an empirically good value.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
There's no bhyve specific PlatformSecureLib any more. Use the default
one of OvmfPkg which works too.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
In an effort to clean the documentation of the above
package, remove duplicated words, and fix a typo while at it.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.muajwar@arm.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.muajwar@arm.com>
In an effort to clean the documentation of the above
package, remove duplicated words.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
On platforms that do not have the serial console port pre-initialized
prior to the SEC phase and due to the absence of a call to
"SerialPortInitialize", this results in missing debug logs. So, call
the auto-generated "ProcessLibraryConstructorList" function from SEC
phase to have all the dependent library constructors called
(this includes a call to "SerialPortInitialize").
Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The warm reboot requests from OSPM are mapped to cold reboot. To handle
the warm reboot separately from a cold reboot, update
ArmSmcPsciResetSystemLib and to invoke the PSCI call with parameters
for warm reboot.
Signed-off-by: Pranav Madhu <pranav.madhu@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Per the UEFI specification, if the Request argument in
EFI_HII_CONFIG_ACCESS_PROTOCOL.ExtractConfig() is NULL or does not contain
any request elements, the implementation should return all of the settings
being abstracted for the particular ConfigHdr reference.
The current implementation returns EFI_INVALID_PARAMETER if Request is
NULL or does not contain any request elements. Instead, construct
a new ConfigRequest to handle these cases per the specification.
In addition, per the UEFI specification, if the Configuration argument in
EFI_HII_CONFIG_ACCESS_PROTOCOL.RouteConfig() has a ConfigHdr that
specifies a non-existing target, the implementation should return
EFI_NOT_FOUND.
The current implementation returns EFI_INVALID_PARAMETER if Configuration
has a non-existing target in ConfigHdr. Instead, perform a check and
return EFI_NOT_FOUND in this case.
Signed-off-by: Dimitrije Pavlov <Dimitrije.Pavlov@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Per UEFI Spec 2.9, EFI_HII_CONFIG_ROUTING_PROTOCOL.RouteConfig()
should return EFI_INVALID_PARAMETER if caller passes in a NULL for
the Configuration parameter (see 35.4 EFI HII Configuration Routing
Protocol).
Add a check to return EFI_INVALID_PARAMETER when Configuration is NULL.
Signed-off-by: Yuan Yu <yuanyu@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add BUILD_SHELL flag, similar to the one in OvmfPkg/AmdSev,
to enable/disable building of the UefiShell as part of
the firmware image. The UefiShell should not be included for
secure production systems (e.g. SecureBoot) because it can be
used to circumvent security features.
The default value for BUILD_SHELL is TRUE to keep the default
behavior of the Ovmf build.
Note: the default for AmdSev is FALSE.
The BUILD_SHELL flag for AmdSev was introduced in b261a30c90.
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Current code will generate duplicate UID if there are nested processor
containers in the topology. For example if there is a
socket/cluster/core layout.
Change references to processor container from cluster to be more
accurate on what is being created.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add APIs needed to build _DSD with different UUIDs.
This is per ACPI specification 6.4 s6.2.5.
Adds support for building data packages with format
Package {"Name", Integer}
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
To remove the dependency of CPU register, 4/8 byte at the top of the
stack is occupied for CpuMpData. BIST information is also taken care
here. This modification is only for PEI phase, since in DXE phase
CpuMpData is accessed via global variable.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
The API of InitializeSeparateExceptionStacks is just changed before, and
makes the struct CPU_EXCEPTION_INIT_DATA an internal definition.
Furthermore, we can even remove the struct to make core simpler.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
When switch bsp, old bsp and new bsp put CR0/CR4 into stack, and put IDT
and GDT register into a structure. After they exchange their stack, they
restore these registers. This logic is now implemented by assembly code.
This patch aims to reuse (Save/Restore)VolatileRegisters function to
replace such assembly code for better code readability.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Currently, when waking up AP, IDT table of AP will be set in 16 bit code,
and assume the IDT table base is 32 bit. However, the IDT table is created
by BSP. Issue will happen if the BSP allocates memory above 4G for BSP's
IDT table. Moreover, even the IDT table location is below 4G, the handler
function inside the IDT table is 64 bit, and it won't take effect until
CPU transfers to 64 bit long mode. There is no benefit to set IDT table in
such an early phase.
To avoid such issue, this patch moves the LIDT instruction into 64 bit
code.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Add host based unit tests for the CpuPageTableLib services.
Unit test focuses on PageTableMap function, containing two kinds of test
cases: manual test case and random test case.
Manual test case creates some corner case to test function PageTableMap.
Random test case generates multiple random memory entries (with random
attribute) as the input of function PageTableMap to get the output
pagetable. Output pagetable will be validated and be parsed to get output
memory entries, and then the input and output memory entries will be
compared to verify the functionality.
The unit test is not perfect yet. There are options for random test, and
some of them control the test coverage, and some option are not ready.
Will enhance in the future.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
On macOS, /usr/bin/gcc is clang, and so doesn't have
the -Wno-error=stringop-overflow flag that was added
for gcc 12.
Update the GNUmakefile for DevicePath to skip setting
that on macOS.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This reverts commit d5fd86f256 for tag202208.
This feature will be merged after stable tag 202208 is created.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Update package maintainers for below package/arch,
1. RISCV64 Architecture:
Abner is stepping out from RISC-V stuff for now and hand over edk2 RISC-V
responsibilities to Sunil.
Daniel Schaefer is no longer with HPE. Update his email address for
RISCV64 arch. He will keep helping on RISC-V stuff with his personal
email.
2. EmbeddedPkg:
Daniel Schaefer is no longer with HPE. Update his email address for
EmbeddedPkg.
3. EmulatorPkg and RedfishPkg:
Nickle Wang is no longer with HPE. Update his email address for
EmulatorPkg and RedfishPkg packages. He will use the personal email for
the time being until he gets ready with his next journey.
Signed-off-by: Abner Chang <abner.chang@amd.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Daniel Schaefer <git@danielschaefer.me>
Cc: Sunil V L <sunilvl@ventanamicro.com>
Cc: Nickle Wang <nickle@csie.io>
Reviewed-by: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Nickle Wang <nickle@csie.io>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Bugzilla: 3995 (https://bugzilla.tianocore.org/show_bug.cgi?id=3995)
ACPI 6.4 spec states that if the revision field in the DSDT header is less
than 2, then all integers are restricted in width to 32 bits, including in
SSDTs.
Arm Base boot requirements state that platforms must conform to ACPI 6.3
or later, and that legacy tables are not supported.
Adds a check for this field and raise warning if revision is less
than 2 on arm.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
There is no function to send POST request with the
ContentType different from "application\json".
There is no function to send DELETE request with the body.
Cc: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Signed-off-by: Igor Kulchytskyy <igork@ami.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Definitions of the required functions to send requests to BMC
are in the PrivateInclude folder. So they cannot be used by
the other Redfish packages.
Cc: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Signed-off-by: Igor Kulchytskyy <igork@ami.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Host Interface details are described by the SMBIOS Type 42
table. The table is published by the RedfishHostInterfaceDxe
driver. That driver supports PCI-E and USB host interface
types.The table is consumed by the edfishGetHostInterfaceProtocolData
function in the RedfishDiscoverDxe driver. The function only supports
PCI-E host interface type.
Cc: Abner Chang <abner.chang@amd.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Signed-off-by: Igor Kulchytskyy <igork@ami.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Since PeerGroups has a variable number of entries, new fields added
after PeerGroups are defined in a extended structure.
Done changes in PrintInfo.c to access those fields using
SMBIOS_TABLE_TYPE9_EXTENDED structure from SmBios.h.
Signed-off-by: Sainadh Nagolu <sainadhn@ami.com>
Cc: Vasudevan Sambandan <vasudevans@ami.com>
Cc: Sundaresan S <sundaresans@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In Type9 structure since PeerGroups has a variable
number of entries, must not define new fields in the structure.So added an
extended structure and defined new fields added after PeerGroups. Also done
some improvements to Smbios 3.5.0 spec changes.
Signed-off-by: Sainadh Nagolu <sainadhn@ami.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Some print statements use format specifiers like %N/%H/%E/%B that are
only supported in the shell print functions. In the ordinary 'Print'
function they are just displayed as letters N/H/E/B.
Remove these unsupported format specifiers from the 'Print' statements
to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The current implementation does not check if Language or DriverName
are NULL. This causes the SCT test suite to crash.
Add a check to return EFI_INVALID_PARAMETER if any of these pointers
are NULL.
Signed-off-by: Dimitrije Pavlov <Dimitrije.Pavlov@arm.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
The current implementation does not check if Info or SizeInfo
pointers are NULL. This causes the SCT test suite to crash.
Add a check to return EFI_INVALID_PARAMETER if any of these
pointers are NULL.
Signed-off-by: Dimitrije Pavlov <Dimitrije.Pavlov@arm.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
The current implementation does not check if Progress or Results
pointers in ExtractConfig are NULL, or if Progress pointer in
RouteConfig is NULL. This causes the SCT test suite to crash.
Add a check to return EFI_INVALID_PARAMETER if any of these pointers
are NULL.
Signed-off-by: Dimitrije Pavlov <Dimitrije.Pavlov@arm.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Add host based unit tests for the CpuPageTableLib services.
Unit test focuses on PageTableMap function, containing two kinds of test
cases: manual test case and random test case.
Manual test case creates some corner case to test function PageTableMap.
Random test case generates multiple random memory entries (with random
attribute) as the input of function PageTableMap to get the output
pagetable. Output pagetable will be validated and be parsed to get output
memory entries, and then the input and output memory entries will be
compared to verify the functionality.
The unit test is not perfect yet. There are options for random test, and
some of them control the test coverage, and some option are not ready.
Will enhance in the future.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Remove clearing CR0.WP when marking the memory used for page table
as read-only in the page table itself created by UefiPayloadEntry.
This page table address is written to Cr3 after these protection
steps. Till this, the memory used for page table is always RW.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Remove clearing CR0.WP when marking the memory used for page table
as read-only in the page table itself created by DxeIpl. This page
table address is written to Cr3 after these protection steps. Till
this, the memory used for page table is always RW.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is code refactoring and doesn't change any functionality.
Remove mInternalCr3 in PiSmmCpuDxe pagetable related code. In previous
code, mInternalCr3 is used to pass address of page table which is
different from Cr3 register in different level of SetMemoryAttributes
function. Now remove it and pass the page table base address from the
root function parameter to simplify the code logic.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is code refactoring and doesn't change any functionality.
Add a new mIsShadowStack flag to identify whether current memory is
shadow stack. Previous smm code logic regards a RO range as shadow
stack and set the dirty bit in corresponding page table entry if
mInternalCr3 is not 0, which may be confusing.
Signed-off-by: Dun Tan <dun.tan@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Ref:https://bugzilla.tianocore.org/show_bug.cgi?id=4000
Change flow to bus scan all root bridge instances even when any
one root bridge meet bus resource OUT_OF_RESOURCE case.
thus platform handler of "EfiPciHostBridgeEndBusAllocation" has
an chance to do relative pci bus rebalance to handle this case.
Signed-off-by: Foster Nong <foster.nong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
With following paging structure to map
[2M-4K, 2M] as P = 1, RW = 0,
[2M, 4M] as P = 1, RW = 1:
PML4[0] -> PDPTE[0] -> PDE[0](RW = 0) -> PTE[255](P = 0, RW = 0)
-> PDE[1](RW = 1)
When a new request to map [2M-4K, 2M+4K] as P = 1, RW = 1,
CpuPageTableMap() wrongly requests 4K buffer size for the new mapping
request.
But in fact, for [2M-4K, 2M] request, PTE[255] can be changed in place,
for [2M, 2M+4K], no change is needed because PDE[1].RW = 1 already.
The change fixes the bug.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
With the following paging structure that maps [0, 2G] with ReadWrite
bit set.
PML4[0] --> PDPTE[0] --> PDE[0-255]
\-> PDPTE[1] --> PDE[0-255]
If ReadWrite bit is cleared in PML4[0] and PageTableMap() is called
to change [0, 2M] as read-only, today's logic unnecessarily changes
the paging structure in 2 aspects:
1. When setting PageTableBaseAddress in the entry, the code clears
all attributes.
2. Even the ReadWrite bit in parent entry is not set, the code clears
the ReadWrite bit in the leaf entry.
First change is wrong. It should not change other attributes when
setting the PA.
Second change is unnecessary. Because the parent entry already
declares the whole region as read-only, there is no need to clear
ReadWrite bit in the leaf entry again.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
With the following paging structure that maps [0, 2G] with ReadWrite
bit set.
PML4[0] --> PDPTE[0] --> PDE[0-255]
\-> PDPTE[1] --> PDE[0-255]
If ReadWrite bit is cleared in PML4[0] and PageTableMap() is called
to change [0, 2M] as writable, today's logic doesn't inherit the
parent entry's attributes when determining the child entry's
attributes. It just sets the PDPTE[0].PDE[0].ReadWrite bit.
But since the PML4[0].ReadWrite is 0, [0, 2M] is still read-only.
The change fixes the bug.
If the inheritable attributes in ParentPagingEntry conflicts with the
requested attributes, let the child entries take the parent attributes
and loosen the attribute in the parent entry.
E.g.: when PDPTE[0].ReadWrite = 0 but caller wants to map [0-2MB as
ReadWrite = 1 (PDE[0].ReadWrite = 1), we need to change
PDPTE[0].ReadWrite = 1 and let all PDE[0-255].ReadWrite = 0 first.
Then change PDE[0].ReadWrite = 1.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Today's logic wrongly treats the non-leaf entry as leaf entry and
updates its paging attributes.
The patch fixes the bug to only update paging attributes for
non-present entries or leaf entries.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When PageTableMap() is called to create non 1:1 mapping
such as [0, 1G) to [8K, 1G+8K), it should split the page entry to the
4K page level, but old logic has a bug that it just uses 1G page
entry.
The patch fixes the bug.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The patch replaces
LinearAddress + Offset == RegionStart
with
((LinearAddress + Offset) & RegionMask) == 0
The replace should not cause any behavior change.
Because:
1. In first loop of while when LinearAddress + Offset == RegionStart,
because the lower "BitStart" bits of RegionStart are all-zero,
all lower "BitStart" bits of (LinearAddress + Offset) are all-zero.
Because all lower "BitStart" bits of RegionMask is all-one and
bits are all-zero, ((LinearAddress + Offset) & RegionMask) == 0.
2. In following loops of the while, even RegionStart is increased
by RegionLength, the lower "BitStart" bits are still all-zero.
So the two expressions still semantically equal to each other.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
When LinearAddress or Length is not aligned on 4KB, PageTableMap()
should return Invalid Parameter.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The lib includes two APIs:
* PageTableMap
It creates/updates mapping from LA to PA.
The implementation only supports paging structures used in 64bit
mode now. PAE paging structure support will be added in future.
* PageTableParse
It parses the page table and returns the mapping relations in an
array of IA32_MAP_ENTRY.
It passed some stress tests. These test code will be upstreamed in
other patches following edk2 Unit Test framework.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
CPU_EXCEPTION_INIT_DATA is now an internal implementation of
CpuExceptionHandlerLib. Union can be removed since Ia32 and X64 have the
same definition. Also, two fields (Revision and InitDefaultHandlers)are
useless, can be removed.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Specify how to build the PrmPkg for the AArch64 architecture.
Make the 2 following notes:
- the PrmPkg has only been tested on AArch64 using the GCC5
toolchain.
- All symbols to be listed in the PRMT as well as the
PrmModuleExportDescriptor must be explicitly preserved by resorting to
the --require-defined linker flag.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add support to build PrmPkg for AArch64 using the GCC compiler.
Add AARCH64 architecture to the list of supported architectures.
Add BaseStackCheck library to allow for Prm module builds on AARCH64.
Also update the CI to add dependency on ArmPkg.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
- Add the --prm flag to the GENFW_FLAGS
- Add the --no-gc-section to the linker flags so that apparently
unreferenced symbols are not prematurely removed from the .dll which
is used to generate the Prm module .efi.
- Force the linker to maintain the PrmModuleExportDescriptor symbol.
- Force the linker to maintain the PRM handler funtion's symbol.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The GenFw invocation with the --prm flag was previously reserved for
X64.
AArch64 platforms, built with GCC5, can also deploy PRM modules, hence
the --prm flag is also applicable in builds targeting the AARCH64
architecture.
This commit enables the --prm flag to be used for EDK2 builds targeting
AARCH64.
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Print 'SubtypeGuid' field from the EFI_FREEFORM_SUBTYPE_GUID_SECTION
structure.
This value describes the raw data inside the section.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
Currently there is no labels for start and end of the
EFI_SECTION_FIRMWARE_VOLUME_IMAGE type section. Therefore it is not
possible to see where the FV section ends and another section starts.
Add labels for start and end of the FV sections to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Fix using RmrNodeCount uninitliased by initliasing it to zero. Also, add
an additional check for ACPI version. This fixes a crash running on
kvmtool.
Signed-off-by: Edward Pickup <edward.pickup@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Ensure that the PixelInformation field of the
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION structure is zeroed out in
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() and
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() when PixelFormat is
PixelBlueGreenRedReserved8BitPerColor.
According to UEFI 2.9 Section 12.9, PixelInformation field of the
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION structure is valid only if
PixelFormat is PixelBitMask. This means that firmware is not required
to fill out the PixelInformation field for other PixelFormat types,
which implies that the QemuVideoDxe implementation is technically
correct.
However, not zeroing out those fields will leak the contents of the
memory returned by the memory allocator, so it is better to explicitly
set them to zero.
In addition, the SCT test suite relies on PixelInformation always
having a consistent value, which causes failures.
Signed-off-by: Dimitrije Pavlov <Dimitrije.Pavlov@arm.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT generator to:
- increment IORT table revision count to 5.
- populate Identifier filed if revision is greater than 4.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.
- Populate the PASID capabilities and Flags field of the
Root complex node.
- Added checks to not generate IORT Rev E, Rev E.<a,b,c>.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the Arm namespace objects to:
- add Identifier field to IORT nodes.
- introduce enums to represent RMR nodes and Memory Range
descriptors.
- add definition of node type 6 - Reserved Memory Range node.
- add definition for Memory Range Descriptors.
- add PASID capabilities and flags field to Root Complex node.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT parser to:
- parse the Identifier field.
- parse Reserved Memory Range node.
- parse Memory Range Descriptors.
- add validations to check that the physical range base
and size of the Memory Range Descriptor is 64KB aligned.
- add validation to check that the IORT Table Revision is
not 4 as IORT Rev E.c is deprecated.
- add validation to check that the IORT RMR node revision
is not 2 as it breaks backward compatibility and was
deprecated as part of IORT Rev E.c.
- skip parsing of IORT Rev E, Rev E.a, Rev E.b, Rev E.c as
some fields were deprecated in these revisions.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Bugzilla: 3458 - Add support IORT Rev E.d specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT header file to reflect these changes,
and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
EFI_ACPI_IO_REMAPPING_TABLE_REVISION_00.
Also update the IORT generator in DynamicTablesPkg to fix the
compilation errors so that Git Bisect can work.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The IORT generator is populating the reference field for Context and
PMU interrupts even if their count is zero.
Update the IORT generator to set the references only if the interrupt
count is not 0. Also add checks to ensure a valid reference token has
been provided.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
The IORT table generator is setting up a reference to ID array for
nodes even when the ID Mapping count is zero. This is not an issue as an
OS would only access the ID Reference if the ID mapping count is not zero.
However, it would be good to set the reference to ID array to zero when
the ID Mapping count is zero rather than populating it with an incorrect
value.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Add error handling when the IdMappingCount is not zero and the
IdMappingToken is NULL.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Some field names in the IORT table parser were longer than the
OUTPUT_FIELD_COLUMN_WIDTH plus indentation, resulting in loss of
the output print alignment. Therefore, abbreviate the field names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Writes TianoCore debug logs into the CBMEM console ringbuffer, from
where the user can retrieve them with the `cbmem` userspace utility.
The intention is to aid in debugging non-fatal issues even in release
builds, or simply make TianoCore's logs available to those interested.
Consequently, MDEPKG_NDEBUG must be masked. As an in-memory debug
logging library, ASSERTs must be non-fatal to be seen, so they neither
dead-loop nor create a breakpoint. It is assumed that ASSERT() neither
enforces fatal conditions nor security integrity, as release builds do
not call DebugAssert() from the ASSERT macro.
More detailed debug logs are produced with the DEBUG_CODE macro, but
this guards other debug-related code throughout the codebase. To avoid
changing behaviour on release builds, this is only set for debug builds.
Tested on QEMU, dumping the appropriate memory region in the UEFI shell
shows the TianoCore log. An improved revision of the debug library used
in several coreboot-related EDK2 forks, including MrChromebox's.
Previous revisions also tested on an Acer Aspire VN7-572G laptop.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Currently there is no labels for start and end of the encapsulation
sections. Therefore it is not possible to see where the encapsulation
section ends and another section starts.
Add labels for start and end of encapsulation sections to fix the
issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently, "push byte %[Vector]" causes nasm warning when Vector is larger
than 0x7F. This is because push accepts a signed value, and byte means
signed int8. Maximum signed int8 is 0x7F.
When Vector is larger the 0x7F, for example, when Vector is 255, byte 255
turns to -1, and causes the warning "signed byte value exceeds".
To avoid such warning, use dword instead of byte, this will increase 3 bytes
for each IdtVector.
For IA32, the size of IdtVector will increase from 10 bytes to 13 bytes.
For X64, the size of IdtVector will increase from 15 bytes to 18 bytes.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
- Correct typo in print statement,
- "BuildNumber" field is UINT16, therefore it needs "0x%04X" format
modifier,
- "VersionString" field is CHAR16, therefore the input data should be
processed to be displayed with "%s" printf modifier.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Currently sections with unknown types are displayed as
`EFI_SECTION_SMM_DEPEX` which is wrong.
Increase the highest value for the section type to 0x1C
for correct parsing.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Alignment attribute is not a bitmask, therefore we need to compare
field value with all alignment defines.
Remove duplicate print statements. Unify indent with other attribute
print statements.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This patch is a bug fix about FeatureFlagExpression in INF file:
INF [Source] section now unconditionally use Pcd default value in DEC
when handling FeatureFlagExpression, it is wrong.
If a Pcd value has been set in the DSC file, we should use latest
value in DSC instead of default value.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yi Li <yi1.li@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3986
The EFI_STATUS_CODE_DATA_MAX_SIZE is defined as 200 in MdeModulePkg.
After reducing 96byte buffer for variable parameters it is limited to
only 104 char debug string. This is a non-necessary limitation.
This change sets EFI_STATUS_CODE_DATA_MAX_SIZE to 0x200, and moves
MAX_EXTENDED_DATA_SIZE definition to the same header file with value
of EFI_STATUS_CODE_DATA_MAX_SIZE + sizeof (EFI_STATUS_CODE_DATA)
which is used in ReportStatusCodeLib to support longer debug string.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Cosmo Lai <cosmo.lai@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The ARM_PROCESSOR_TABLE pseudo-ACPI table (which carries a ACPI-table
like header but is published as a EFI config table) is not described in
any relevant spec, and is not known to be relied upon by any OS. Let's
just get rid of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3952
In UEFI spec, it defines reconnect timing that will be activated upon
exiting of the formset or the browser. However, we did't use this kind
of way to check reconnect conditioncode. Code only blocks reconnect if
page is updated dynamically. That's not matched spec'd way. We should
check current formset whether is exiting, then reconnect driver.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add support library to allow for customization of _OSC and slot info.
The functions in the library are unchanged,
with the exception of adding PciInfo pointer to the APIs.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for PCIe devices with UID > 0xF.
This is done by using the next value in the name so
PCI5, PC26, etc
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
SSDT tables describing an SBSA compatible serial port receive an '_HID'
value of 'ARMH0011'. This value represents a PL011 serial port.
This patch:
- Generates an 'ARMHB000' instead
- References the 'ACPI for Arm Components 1.0 - 2020' document
specifying the '_HID' values to use.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Device Tree PCI interrupt flags use the convention described at
linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = low-to-high edge triggered
2 = high-to-low edge triggered (invalid for SPIs)
4 = active high level-sensitive
8 = active low level-sensitive (invalid for SPIs).
Fix the incorrect code.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Currently BaseTools use 'cp' command for PcdValueInit and GenMake
process, as the command can not keep the time info of the source
file, which will cause incremental build issue in Linux system,
thus the '-p' need be added to keep the source file's attributes
in copy process.
This patch fixes this issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The CM_STD_OBJ_ACPI_TABLE_INFO.AcpiTableRevision can be used to specify
the major revision number of the ACPI table that the generator must use.
Although most ACPI tables only have a major revision number, the FADT
table additionally has a minor revision number.
The FADT generator currently defaults to setting the latest supported
ACPI revision for the FADT table i.e. ACPI 6.4. This means that the minor
revision for the FADT table is always set to 4 and there is no provision
for a user to specify the minor revision to be selected.
Therefore, update CM_STD_OBJ_ACPI_TABLE_INFO to introduce a new field
MinorRevision which can be used to specify the minor revision for an
ACPI table. Also update the FADT generator to validate the supported
FADT revisions ans use the specified minor revision for the FADT table
if supported. If an unsupported minor revision is specified the FADT
generator defaults to the latest supported minor revision.
Since the CM_STD_OBJ_ACPI_TABLE_INFO.MinorRevision field is added to
the end of the structure, it should not break existing platform code.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
Updated DMAR definitions accordingly to changes in Intel(R) Virtualization
Technology for Directed I/O (VT-D) Architecture Specification ver4.0.
Added new definition of remapping structure - SIDP. The SoC Integrated
Device Property (SIDP) reporting structure identifies devices that have
special properties and that may put restrictions on how system software
must configure remapping structures that govern such devices in a platform
where remapping hardware is enabled.
Updated DRHD definition - field 'reserved' is replaced with 'Size'.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3978
Signed-off-by: Robert Kowalewski <robert.kowalewski@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Sheng Wei <w.sheng@intel.com>
Reviewed-by: Sheng Wei <w.sheng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The python BaseTools/Edk2ToolsBuild.py creates files in
BaseTools/BaseToolsBuild and should be ignored.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
There are two scene communicate with StandaloneMm(MM):
1 edk2 -> TF-A -> MM, communicate MM use non-secure buffer which
specify by EFI_SECURE_PARTITION_BOOT_INFO.SpNsCommBufBase;
2 RAS scene: fiq -> TF-A -> MM, use secure buffer which
specify by EFI_SECURE_PARTITION_BOOT_INFO.SpShareBufBase;
For now, the second scene will failed because check buffer address.
This patch add CheckBufferAddr() to support check address for secure
buffer.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
TF-A: TrustedFirmware-A
SPM: Secure Partition Manager(MM)
In TF-A, the name of this field is sp_shared_buf_size. This field is
the size of range for transmit data from TF-A to standaloneMM when
SPM enable.
SpPcpuSharedBufSize is pass from TF-A while StandaloneMM initialize.
So, SpPcpuSharedBufSize should be rename to SpSharedBufSize and this field
should no multiply by PayloadBootInfo->NumCpus;
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The issue appears to have been introduced by:
41fb5d46 : ArmPkg/ArmGic: Use the GIC Redistributor instead of GIC Distributor for GICv3
The changes to ArmGicIsInterruptEnabled() introduced the error where the Boolean
result is assigned to Interrupts, but then the bit position check is performed
again (against the computed Boolean result instead of the interrupt mask) during
the return statement.
Fix removes erroneous test and relies on boolean test made at return.
Signed-off-by: Robbie King <robbiek@xsightlabs.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Upgrade the edk2-basetools version from 0.1.17 to 0.1.24
features and bug fixes:
1. Add FMMT Python Tool
2. Remove RVCT support
3. Fix dependency issue in PcdValueInit
4. Output the intermediate library instance when error occurs
5. Ecc: Fix grammar in Ecc error message
6. Fix the GenMake bug for .cpp source file
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
Add support process Port Speed field value of PORTSC according to
Supported Protocol Capability (define in xHCI spec 1.1)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3914
The value of Port Speed field in PORTSC bit[10:13]
(xHCI spec 1.1 section 5.4.8) should be change to use this value to
query thru Protocol Speed ID (PSI) (xHCI spec 1.1 section 7.2.1)
in xHCI Supported Protocol Capability and return the value according
the Protocol Speed ID (PSIV) Dword.
With this mechanism may able to detect more kind of Protocol Speed
in USB3 and also compatiable with three kind of speed of USB2.
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: More Shih <more.shih@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ian Chiu <Ian.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Include HardwareInfoLib classes in the IntelTdxX64.dsc for this
platform to use it during build given that PciHostBridgeUtilityLib
depends on it.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Include DxeHardwareInfoLib class in the common ArmVirt.dsc.inc so that
ArmVirt* platforms use it during build given that PciHostBridgeUtilityLib
depends on it.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
A memory range can be submitted for attribute changes which is large
enough to not require a page split during the attribute update. Consider
the following scenario:
1. An attribute update removed the RW attribute on a range large enough
to not require a page split.
2. Later, an attributes update is called to re-add the RW attribute for
a subsection of that larger page which requires a split
3. The attribute update logic performs a page split, so now the parent
and child pages have matching attributes
4. Then, the attribute update logic changes the child page to have the
RW attribute.
5. The child page would then correctly have the RW attribute added but
the parent page would still have the RW attribute removed which will
cause an improper access violation.
The page being split should have loose attributes to accommodate the
above case. The split page should always have the attributes set so
the lowest level page frame determines the access rights as detailed
in 4.10.2.2 of the Intel 64 and IA-32 Architectures Software
Developer Manual. Setting the User/Supervisor attribute shouldn't
be necessary.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
For Arm platforms that support more that one serial port, one of the
serial port can be used for connecting debuggers such as WinDbg. There
are PCDs that allow the base address and clock rate to be specified for
this debug serial port but not its interrupt number. So add a PCD to
specify the interrupt number assigned to the serial debug port
controller.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Consume the host-provided specification of PCI host bridges if
available. Using the DxeHardwareInfoLib, populate a list of
hardware descriptors based on the content of the "hardware-info"
fw-cfg file, if provided. In the affirmative case, use the
resources and attributes specified by the hypervisor for each
Host Bridge to create the RootBridge elements.
In Ovmf platforms, the host can provide the specification of
non-discoverable hardware resources like PCI host bridges. If the
proper fw-cfg file is found, parse the contents provided by the
host into a linked list by using the Hardware Info library. Then,
using the list of PCI host bridges' descriptions, populate the
PCI_ROOT_BRIDGES array with the resources and attributes specified
by the host. If the file is not provided or no Host Bridge is found
in it, fold back to the legacy method based on pre-defined
apertures and rules.
In some use cases, the host requires additional control over the
hardware resources' configurations in the guest for performance and
discoverability reasons. For instance, to disclose information about
the PCI hierarchy to the guest so that this can profit from
optimized accesses. In this case, the host can decide to describe
multiple PCI Host Bridges and provide a specific set of resources
(e.g. MMIO apertures) so that the guest uses the values provided.
Using the provided values may entitle the guest to added performance,
for example by using specific MMIO mappings that can enable peer-to-peer
communication across the PCI hierarchy or by allocating memory closer
to a device for faster DMA transactions.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Read the "hardware-info" item from fw-cfg to extract specifications
of PCI host bridges and analyze the 64-bit apertures of them to
find out the highest 64-bit MMIO address required which determines
the address space required by the guest, and, consequently, the
FirstNonAddress used to calculate size of physical addresses.
Using the static PeiHardwareInfoLib, read the fw-cfg file of
hardware information to extract, one by one, all the host
bridges. Find the last 64-bit MMIO address of each host bridge,
using the HardwareInfoPciHostBridgeLib API, and compare it to an
accumulate value to discover the highest address used, which
corresponds to the highest value that must be included in the
guest's physical address space.
Given that platforms with multiple host bridges may provide the PCI
apertures' addresses, the memory detection logic must take into
account that, if the host provided the MMIO windows that can and must
be used, the guest needs to take those values. Therefore, if the
MMIO windows are found in the host-provided fw-cfg file, skip all the
logic calculating the physical address size and just use the value
provided. Since each PCI host bridge corresponds to an element in
the information provided by the host, each of these must be analyzed
looking for the highest address used.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Following the Hardware Info library, create the DxeHardwareInfoLib
which implements the whole API capable of parsing heterogeneous hardware
information. The list-like API grants callers a flexible and common
pattern to retrieve the data. Moreover, the initial source is a BLOB
which generalizes the host-to-guest transmission mechanism.
The Hardware Info library main objective is to provide a way to
describe non-discoverable hardware so that the host can share the
available resources with the guest in Ovmf platforms. This change
features and embraces the main idea behind the library by providing
an API that parses a BLOB into a linked list to retrieve hardware
data from any source. Additionally, list-like APIs are provided so
that the hardware info list can be traversed conveniently.
Similarly, the capability is provided to filter results by specific
hardware types. However, heterogeneous elements can be added to the
list, increasing the flexibility. This way, a single source, for
example a fw-cfg file, can be used to describe several instances of
multiple types of hardware.
This part of the Hardware Info library makes use of dynamic memory
and is intended for stages in which memory services are available.
A motivation example is the PciHostBridgeLib. This library, part
of the PCI driver populates the list of PCI root bridges during DXE
stage for future steps to discover the resources under them. The
hardware info library can be used to obtain the detailed description
of available host bridges, for instance in the form of a fw-cfg file,
and parse that information into a dynmaic list that allows, first to
verify consistency of the data, and second discover the resources
availabe for each root bridge.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Define the HardwareInfoLib API and create the PeiHardwareInfoLib
which implements it, specifically for Pei usage, supporting
only static accesses to parse data directly from a fw-cfg file.
All list-like APIs are implemented as unsupported and only a
fw-cfg wrapper to read hardware info elements is provided.
The Hardware Info library is intended to describe non-discoverable
hardware information and share that from the host to the guest in Ovmf
platforms. The QEMU fw-cfg extension for this library provides a first
variation to parse hardware info by reading it directly from a fw-cfg
file. This library offers a wrapper function to the plain
QmeuFwCfgReadBytes which, specifically, parses header-data pairs out
of the binary values in the file. For this purpose, the approach is
incremental, reading the file block by block and outputting the values
only for a specific known hardware type (e.g. PCI host bridges). One
element is returned in each call until the end of the file is reached.
Considering fw-cfg as the first means to transport hardware info from
the host to the guest, this wrapping library offers the possibility
to statically, and in steps, read a specific type of hardware info
elements out of the file. This method reads one hardware element of a
specific type at a time, without the need to pre-allocate memory and
read the whole file or dynamically allocate memory for each new
element found.
As a usage example, the static approach followed by this library
enables early UEFI stages to use and read hardware information
supplied by the host. For instance, in early times of the PEI stage,
hardware information can be parsed out from a fw-cfg file prescinding
from memory services, that may not yet be available, and avoiding
dynamic memory allocations.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Create the Hardware Info library base together with the specifics to
describe PCI Host Bridges.
The Hardware Info library is intended to be used for disclosing
non-discoverable hardware information from the host to the guest in
Ovmf platforms. Core functionality will provide the possibility to
parse information from a generic BLOB into runtime structures. The
library is conceived in a generic way so that further hardware
elements can also be described using it. For such purpose the length
of the BLOB is not restricted but instead regarded as a sequence of
header-info elements that allow the parsing during runtime. The first
type of hardware defined will be PCI host bridges, providing the
possibility to define multiple and specify the resources each of them
can use. This enables the guest firmware to configure PCI resources
properly. Having the size of each individual element favors the reuse
of a single interface to convey descriptions of an arbitrary number
of heterogenous hardware elements. Furthermore, flexible access
mechanisms coupled with the size will grant the possibility of
interpreting them in a single run.
Define the base types of the generic Hardware Info library to parse
heterogeneous data. Also provide the specific changes to support
PCI host bridges as the first hardware type supported by the
library.
Additionally, define the HOST_BRIDGE_INFO structure to describe PCI
host bridges along with the functionality to parse such information
into proper structures used by the PCI driver in a centralized manner
and taking care of versioning.
As an example and motivation, the library will be used to define
multiple PCI host bridges for complex platforms that require it.
The first means of transportation that will be used is going to be
fw-cfg, over which a stream of bytes will be transferred and later
parsed by the hardware info library. Accordingly, the PCI driver
will make use of these host bridges definitions to populate the
list of Root Bridges and proceed with the configuration and discovery
of underlying hardware components.
As mentioned before, the binary data to be parsed by the Hardware
Info library should be organized as a sequence of Header-element
pairs in which the header describes the type and size of the associated
element that comes right after it. As an illustration, to provide
inforation of 3 host bridges the data, conceptually, would look
like this:
Header PCI Host Bridge (type and size) # 1
PCI Host Bridge info # 1
Header PCI Host Bridge (type and size) # 2
PCI Host Bridge info # 2
Header PCI Host Bridge (type and size) # 3
PCI Host Bridge info # 3
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
We can have multiple [LibraryClasses] sections, so we can place
all TPM-related library configuration to a single include file.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The DEBUG output in LcdGraphicsBlt is overly verbose, and makes using
the console difficult, for example when using the UiApp.
Since the extra output should no longer be needed, delete the DEBUG
lines.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
We observed page fault in the following situation:
1.PayloadEntry uses 2M entry in page table to cover DXE stack range.
2.In DXE phase, image protection code needs to mark some sub-range in
this 2M entry as readonly. So the the 2M page table entry is split to
512 4K entries, and some of the entries are marked as readonly.
(the entries covering stack still remain R/W)
3.Page fault exception happens when trying to access stack.
Always split the page table entry to 4K if it covers stack to avoid this
issue.
More discussion about this issue can be seen at below link
https://edk2.groups.io/g/devel/topic/91446026
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The maximum Unicode string could be as large as 1800000 in certain
platforms when HII code builds the configuration strings.
This causes assertion in PrintLib.
The patch increases the PcdMaximumUnicodeStringLength to 1800000 to
avoid the assertion.
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
When a module "Module" depends on a library instance "Lib1" which
depends on "Lib2" which depends on "Lib3" ... depends on "LibN",
but "LibN" doesn't support the type (e.g.: SEC) of the "Module", the
following error messages are printed by build tool:
<DSC path>(...): error 1001: Module by library instance [<LibN path>]
consumed by [<Module path>]
But it's unclear to user how LibN is consumed by the Module.
With the patch, following errors are printed:
<DSC path>(...): error 1001: Module by library instance [<LibN path>]
consumed by library instance [<Lib N-1 path>] which is
consumed by module[<Module path>]
It doesn't print all the intermediate library instances between the
Module and LibN but at least the path of Lib N-1 can help users
to help how to fix the build errors.
I hope this patch can be a trigger point that a better solution could
be developed by tool experts to print all the library instances
between the Module and LibN.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.fen@intel.com>
Commit e7abb94d1 removed InitializeCpuExceptionHandlersEx
and updated DxeMain to call InitializeCpuExceptionHandlers
for exception setup. But the old behavior that calls *Ex() sets
up the stack guard as well. To match the old behavior,
the patch calls InitializeSeparateExceptionStacks.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
CpuExceptionHandlerLib has been refactored with following changes:
1. Removed InitializeCpuInterruptHandlers in 2a09527ebc
2. Removed InitializeCpuExceptionHandlersEx and
added InitializeSeparateExceptionStacks in e7abb94d1f
The patch updates ARM version of CpuExceptionHandlerLib to follow
the API changes.
The functionality to ARM platforms should be none.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This reverts commit ff36b2550f.
Has no effect because GCC_IA32_CC_FLAGS and GCC_X64_CC_FLAGS are unused.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The AP vector consists of 2 parts:
1. the initial 16-bit code that should be under 1MB and page aligned.
2. the 32-bit/64-bit code that can be anywhere in the memory with any
alignment.
The need of part #2 is because the memory under 1MB is temporary
"stolen" for use and will "give" back after all AP wake up. The range
of memory is not marked as code page in page table. CPU may trigger
exception as soon as NX is enabled.
The part #2 memory allocation can be done in the MpInitLibInitialize.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Today's implementation allocates below 1MB memory for the 16bit, 32bit
and 64bit code.
But it's not necessary since now the 32bit and 64bit code run at high
memory no matter in PEI and DXE phase.
The patch simplifies the logic to remove the code that handles the
case when WakeupBufferHigh is 0.
It also reduce the memory foot print under 1MB by allocating
memory for 16bit code only.
MP_CPU_EXCHANGE_INFO is still under 1MB which is immediate
after the 16bit code.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
global in NASM file is used for symbols that are
referenced in C files.
Remove unneeded global keyword in NASM file.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Today's implementation assumes PEI phase runs at 32bit so
the execution-disable feature is not applicable.
It's not always TRUE.
The patch allocates 32bit&64bit code buffer for PEI phase as well.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Today InitializeCpuExceptionHandlersEx is called from three modules:
1. DxeCore (links to DxeCpuExceptionHandlerLib)
DxeCore expects it initializes the IDT entries as well as
assigning separate stacks for #DF and #PF.
2. CpuMpPei (links to PeiCpuExceptionHandlerLib)
and CpuDxe (links to DxeCpuExceptionHandlerLib)
It's called for each thread for only assigning separate stacks for
#DF and #PF. The IDT entries initialization is skipped because
caller sets InitData->X64.InitDefaultHandlers to FALSE.
Additionally, SecPeiCpuExceptionHandlerLib, SmmCpuExceptionHandlerLib
also implement such API and the behavior of the API is simply to initialize
IDT entries only.
Because it mixes the IDT entries initialization and separate stacks
assignment for certain exception handlers together, in order to know
whether the function call only initializes IDT entries, or assigns stacks,
we need to check:
1. value of InitData->X64.InitDefaultHandlers
2. library instance
This patch cleans up the code to separate the stack assignment to a new API:
InitializeSeparateExceptionStacks().
Only when caller calls the new API, the separate stacks are assigned.
With this change, the SecPei and Smm instance can return unsupported which
gives caller a very clear status.
The old API InitializeCpuExceptionHandlersEx() is removed in this patch.
Because no platform module is consuming the old API, the impact is none.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
InitializeCpuExceptionHandlers() expects caller allocates IDT while
InitializeCpuInterruptHandlers() allocates 256 IDT entries itself.
InitializeCpuExceptionHandlers() fills max 32 IDT entries allocated
by caller. If caller allocates 10 entries, the API just fills 10 IDT
entries.
The inconsistency between the two APIs makes code hard to
unerstand and hard to share.
Because there is only one caller (CpuDxe) for
InitializeCpuInterruptHandler(), this patch updates CpuDxe driver
to allocates 256 IDT entries then call
InitializeCpuExceptionHandlers().
This is also a backward compatible change.
With this change, InitializeCpuInterruptHandlers() is removed
completely.
And InitializeCpuExceptionHandlers() fills max 32 entries for PEI
and SMM instance, max 256 entries for DXE instance.
Such behavior matches to the original one.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Additionally removed two useless global variables:
"SPIN_LOCK mDisplayMessageSpinLock" from SMM instance.
"UINTN mEnabledInterruptNum" from DXE instance.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Today the DXE instance allocates code page and then copies the IDT
vectors to the allocated code page. Then it fixes up the vector number
in the IDT vector.
But if we update the NASM file to generate 256 IDT vectors, there is
no need to do the copy and fix-up.
A side effect is 4096 bytes (HOOKAFTER_STUB_SIZE * 256) is used for
256 IDT vectors while 32 IDT vectors only require 512 bytes without
this change, in following library instances:
1. 32bit SecPeiCpuExceptionHandlerLib and PeiCpuExceptionHandlerLib
2. 64bit PeiCpuExceptionHandlerLib
But considering the code logic simplification, 3.5K extra space is
not a big deal.
If 3.5K is too much, we can enhance the code further to generate 32
vectors for above mentioned library instances.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Eric Dong <eric.dong@intel.com>
The ebp/rbp register can either be used for the frame pointer or
as general purpose register. With gcc (and clang) this depends
on the -f(no-)omit-frame-pointer switch.
This patch updates tools_def.template to explicitly set the compiler
option and also add a define to allow conditionally compile code.
The new define is used to fix stack switching in TemporaryRamMigration.
The ebp/rbp must not be touched when the compiler can use it as general
purpose register. With version 12 gcc starts actually using the
register, so changing it leads to firmware crashes in some
configurations.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3934
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The feature of SecMeasurementLibTdx is replaced by SecTpmMeasurementLibTdx
(which is in SecurityPkg). So SecMeasurementLibTdx is deleted.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
MeasureHobList and MeasureFvImage once were implemented in
SecMeasurementTdxLib. The intention of this patch-set is to refactor
SecMeasurementTdxLib to be an instance of TpmMeasurementLib. So these
2 functions (MeasureHobList/MeasureFvImage) are moved to
PeilessStartupLib. This is because:
1. RTMR based trusted boot is implemented in Config-B (See below link)
2. PeilessStartupLib is designed for PEI-less boot and it is the right
place to do the measurement for Hoblist and Config-FV.
Config-B: https://edk2.groups.io/g/devel/message/76367
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
SecTpmMeasurementLitTdx is an instance of TpmMeasurementLib. It is
designed to used in a Td guest. This lib measures and logs data, and
extendx the measurement result into a specific RTMR.
SecTpmMeasurementLibTdx is a refactored lib of
OvmfPkg/Library/SecMeasurementLibTdx and it just copies
GetMappedRtmrIndex/TdxMeasureAndLogData from that lib. At the end of
this patch-set SecMeasurementLibTdx will be deleted.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The generated Makefile was missing a dependency. This resulted in a
build-time race condition if the recursive make is multi-threaded and
shares job control.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Since Cloud Hypervisor doesn't emulate an A20 gate register on I/O port
0x92, it's better to avoid accessing it when the platform is identified
as Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Since Cloud Hypervisor doesn't support the fw_cfg mechanism, it's more
appropriate to rely on QemuFwCfgLibNull implementation of QemuFwCfgLib
since it provides a null implementation that will not issue any PIO
accesses to ports 0x510 and 0x511.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
There are few places in the codebase assuming QemuFwCfg will be present
and supported, which can cause some issues when trying to rely on the
QemuFwCfgLibNull implementation of QemuFwCfgLib.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
The FW_BASE_ADDRESS value provided by OvmfPkgDefines.fdf.inc is
incorrect for the CloudHv target. We know the generated firmware
contains a PVH ELF header, meaning it will be loaded according to the
address provided through this header. And since we know this address
isn't going to change as it's part of CloudHvElfHeader.fdf.inc, we can
hardcode it through a new include file CloudHvDefines.fdf.inc, which
replaces the generic one OvmfPkgDefines.fdf.inc.
With this change, we prevent the firmware from accessing MMIO addresses
from the address range 0xffc00000-0xffffffff since we know the firmware
hasn't been loaded on this address range.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
microvm places the 64bit mmio space at the end of the physical address
space. So mPhysMemAddressWidth must be correct, otherwise the pci host
bridge setup throws an error because it thinks the 64bit mmio window is
not addressable.
On microvm we can simply use standard cpuid to figure the address width
because the host-phys-bits option (-cpu ${name},host-phys-bits=on) is
forced to be enabled. Side note: For 'pc' and 'q35' this is not the
case for backward compatibility reasons.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
microvm doesn't support pflash and loads the firmware via -bios,
so we can't use the separate CODE and VARS files. Remove them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
In current TDVF implementation all unaccepted memory passed in Hoblist
are tagged as EFI_RESOURCE_MEMORY_UNACCEPTED. They're all accepted before
they can be accessed. After accepting memory region, the Hob ResourceType
is unchanged (still be EFI_RESOURCE_MEMORY_UNACCEPTED).
TDVF Config-B skip PEI phase and it tries to find a memory region which
is the largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
So we should walk thru the input hoblist and search for the memory region
with the type of EFI_RESOURCE_MEMORY_UNACCEPTED.
Because EFI_RESOURCE_MEMORY_UNACCEPTED has not been officially in PI spec.
So it cannot be defined in MdePkg/Include/Pi/PiHob.h. As a temporary
solution it is defined in Hob.c.
There is a patch-set for lazy-accept very soon. In that patch-set
EFI_RESOURCE_MEMORY_UNACCEPTED will be defined in MdeModulePkg.
Config-B: https://edk2.groups.io/g/devel/message/76367
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The SEV-ES bit of Fn800-001F[EAX] - Bit 3 is used for a host to
determine support for running SEV-ES guests. It should not be checked by
a guest to determine if it is running under SEV-ES. The guest should use
the SEV_STATUS MSR Bit 1 to determine if SEV-ES is enabled. This check
was not part of the original SEV-ES support and was added in
a91b700e38. Removing the check makes this code consistent with the
Linux kernel
Fixes: a91b700e38 ("Ovmf/ResetVector: Simplify and consolidate the SEV features checks")
Signed-off-by: Peter Gonda <pgonda@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
kvm FSB clock is 1GHz, not 100 MHz. Timings are off by factor 10.
Fix all affected build configurations. Not changed: Microvm and
Cloudhw (they have already have the correct value), and Xen (has
no fixed frequency, the PCD is configured at runtime by platform
initialization code).
Fixes: c37cbc030d ("OvmfPkg: Switch timer in build time for OvmfPkg")
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In TDX, Application Processor busy-loops on Mailbox for OS to issue
MpProtectedModeWakeupCommandWakeup command to UEFI. As the AP acking to
it, it clears the command member according to ACPI spec 6.4, 5.2.12.19
Multiprocessor Wakeup Structure: "The application processor need clear the
command to Noop(0) as the acknowledgement that the command is received."
However, AsmRelocateApMailBoxLoop wrongly clears WakeupVector. Correctly
clear command instead of WakeupVector.
Without this patch, TD guest kernel fails to boot APs.
Fixes: fae5c1464d ("OvmfPkg: Add TdxDxe driver")
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
The BaseMemEncryptSevLib functionality was updated to rely on the use of
the OVMF/SEV workarea to check for SEV guests. However, this area is only
updated when running the X64 OVMF build, not the hybrid Ia32/X64 build.
Base SEV support is allowed under the Ia32/X64 build, but it now fails
to boot as a result of the change.
Update the ResetVector code to check for SEV features when built for
32-bit mode, not just 64-bit mode (requiring updates to both the Ia32
and Ia32X64 fdf files).
Fixes: f1d1c337e7
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds a new library class VariableFlashInfoLib that abstracts access
to variable flash information. The instance provided first attempts
to retrieve information from the Variable Flash Info HOB. If that
HOB is not present, it falls back to the PCDs defined in
MdeModulePkg.
This fall back behavior provides backward compatibility for platforms
that only provide PCDs but also allows platforms that need to
dynamically provide the information using the Variable Flash Info HOB
to do so at runtime.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds a new GUID that is used to identify a HOB that passes variable
flash information to UEFI variable drivers in HOB consumption phases
such as DXE, Traditional MM, and Standalone MM.
This information was previously passed directly with PCDs such
as EfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
and gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize.
However, the Standalone MM variable driver instance does not have
direct access to the PCD database. Therefore, this HOB will first
be considered as the source for variable flash information and
if platforms do not produce the HOB, reading the information from
the PCDs directly will be a backup to provide backward
compatibility.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Current code follow some rules to check if the PCI device connected to a
serial port device, but some platform or hardware doesn't follow such rule.
By locating gEfiSerialIoProtocolGuid protocol, we can find the related
device path.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
A little overdesign about VisitAllPciInstances function, since there are
two call back functions. Simplify the code logic by combining the two call
back functions, and unused parameters.
Change the PROTOCOL_INSTANCE_CALLBACK to SIMPLE_PROTOCOL_INSTANCE_CALLBACK
because the former is also defined in OvmfPkg. Rename it to avoid confusion.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3488
Current free pool routine from PiSmmCore will inspect memory guard status
for target buffer without considering pool headers. This could lead to
`IsMemoryGuarded` function to return incorrect results.
In that sense, allocating a 0 sized pool could cause an allocated buffer
directly points into a guard page, which is legal. However, trying to
free this pool will cause the routine changed in this commit to read XP
pages, which leads to page fault.
This change will inspect memory guarded with pool headers. This can avoid
errors when a pool content happens to be on a page boundary.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Recommend from Gerd:
(2) Keep the EC config option, but update process_files.pl to
automatically add the PcdEcEnabled config option handling
to the files it generates.
When remove 'no-ec' from openssl configure list, will automatically remove
'OPENSSL_NO_EC', 'OPENSSL_NO_ECDH', 'OPENSSL_NO_ECDSA', 'OPENSSL_NO_TLS1_3',
form header, and add '/ec/.', '/sm2/.' files to INF files.
Signed-off-by: Yi Li <yi1.li@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Move auto-generated openssl config to openssl/opensslconf_generated,
And openssl/opensslconf.h will contain both edk2 conditional openssl
feature and openssl/opensslconf_generated.
Will make two part more clear.
New conditional feture code in opensslconf.h will look like:
/* Autogenerated conditional openssl feature list starts here */
[.....]
/* Autogenerated conditional openssl feature list ends here */
Signed-off-by: Yi Li <yi1.li@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyu1.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3917
When PlatformPkg.dsc has multiple SKU IDs but didn't exist delta PCD,
System will hang on BuildPcdDxeDataBase.
Ideally, if didn't exist delta PCD by different SKU ID,
UpdatePcdDatabase () shouldn't return EFI_NOT_FOUND.
Signed-off-by: Gua Guo <gua.guo@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3913
The original flow of PcRtcInit() is like:
1. Guarantee atomic accesses to the RTC time registers and
read out the value.
2. Program RTC register B. (adopt 12h mode or 24h mode. Current
bios code sets RTC to 24h mode by default).
3. Then function ConvertRtcTimeToEfiTime converts the RTC time
value to their 24h mode by checking the hour format bit
(1:24h mode,0:12h mode).
And here lies the problem: Step3 will fail to adjust the value
if Step2 already sets RTC to 24h mode. The hour value in 12h mode
will not be converted to its 24h mode.
The solution is to program RTC register B a little later when all
the original RTC registers' value is retrieved, adjusted
and validated.
ConvertRtcTimeToEfiTime is modified to be more robust.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhuoran Chao <zhuoran.chao@intel.com>
REF? https://bugzilla.tianocore.org/show_bug.cgi?id=3912
UefiCpuPkg define a new Protocol with the new services
SmmWaitForAllProcessor(), which can be used by SMI handler
to optionally wait for other APs to complete SMM rendezvous in
relaxed AP mode.
VariableSmm and VariableStandaloneMM driver in MdeModulePkg need
to use this services but MdeModulePkg can't depend on UefiCpuPkg.
Thus, the solution is moving SmmCpuRendezvouslib.h from UefiCpuPkg
to MdePkg and creating SmmCpuRendezvousLib NullLib version
implementation in MdePkg as dependency for the pkg that can't
depend on UefiCpuPkg.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Zhihao Li <zhihao.li@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
There are two libraries: MdePkg/CpuLib and UefiCpuPkg/UefiCpuLib and
UefiCpuPkg/UefiCpuLib will be merged to MdePkg/CpuLib. To avoid build
failure, add CpuLib dependency to all modules that depend on UefiCpuLib.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Yu Pu <yu.pu@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The FMMT python tool is used for firmware files operation, which has
the Fv/FFs-based 'View'&'Add'&'Delete'&'Replace' operation function:
1.Parse a FD(Firmware Device) / FV(Firmware Volume) / FFS(Firmware Files)
2.Add a new FFS into a FV file (both included in a FD file or not)
3.Replace an FFS in a FV file with a new FFS file
4.Delete an FFS in a FV file (both included in a FD file or not)
5.Extract the FFS from a FV file (both included in a FD file or not)
This version of FMMT Python tool does not support PEIM rebase feature,
this feature will be added in future update.
Currently the FMMT C tool is saved in edk2-staging repo, but its
quality and coding style can't meet the Edk2 quality, which is hard to
maintain (Hard/Duplicate Code; Regression bugs; Restrict usage).
The new Python version keeps same functions with origin C version. It
has higher quality and better coding style, and it is much easier to
extend new functions and to maintain.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1847
RFC Link: https://edk2.groups.io/g/devel/message/82877
Staging Link: https://github.com/tianocore/edk2-staging/tree/PyFMMT
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
With GNU Make 4.2.1, ifeq ($(EDK2_DSC),"") doesn't catch the case where
EDK2_DSC isn't defined. So, switch to using ifndef.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The debugger in Arm Development Studio 2021.2 doesn't work with
"ec = debugger.getExecutionContext(0)" because it's subsequently unable
to access memory. Fix it by switching to
"ec = debugger.getCurrentExecutionContext()".
The documentation for waitForStop() says:
"It is not needed after a call to stop() because stop() is blocking."
So, remove the call to waitForStop.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
An error message in Scripts/Ds5/edk2_debugger.py was missing the word
'not'.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
QemuFwCfg is much more powerful than BhyveFwCtl. Sadly, BhyveFwCtl
decided to use the same IO ports as QemuFwCfg. It's not possible to use
both interfaces simultaneously. So, prefer QemuFwCfg over BhyveFwCtl.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Was dropped by accident.
Fixes: b47575801e ("OvmfPkg: move tcg configuration to dsc and fdf include files")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In the Dynamic-Library-File template, add missing output file
declarations. These files are generated by the template and other rules
explicitly depend on them.
This change resolves missing dependency issues we encountered while
running a recursive make with job control.
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Try query native display resolution from the host. When successful,
setup PcdVideoHorizontalResolution and PcdVideoVerticalResolution
accordingly and add the video mode to the GOP mode list if needed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add new function to initialize the GOP, move over setup code. Handle
initialization first, specifically before calling GopQueryMode(), so
GopQueryMode is never called before GopInitialize() did complete.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Call GopQueryMode() in GopSetMode(), use the ModeInfo returned when
setting the mode. This is needed to properly handle modes which are
not on the static mGopResolutions list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Extend VirtioGpuSendCommand() to support commands which return data,
rename the function to VirtioGpuSendCommandWithReply() to indicate that.
Add a new VirtioGpuSendCommand() function which is just a thin wrapper
around VirtioGpuSendCommandWithReply() so existing code continues to
work without changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
ConSplitterDxe will pick the highest available resolution then,
thereby making better use of the available display space.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
ConSplitterDxe will pick the highest available resolution then,
thereby making better use of the available display space.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add modes for a few common display resolutions higher than 800x600,
specifically 1024x768, 1280x800 and 1920x1080, so ConSplitterDxe has
more options available.
The mode list is not use as-is, InitializeGraphicsConsoleTextMode() will
check the list and filter out any modes which don't fit to the screen,
so this will also work fine for small displays.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3828
This is a bugfix of
bf9230a9f3.
1.In the current code, gPlatformFinalPcd will save all PCDs used at
whole compile process, which wastes runtime memory and is unnecessary.
This patch makes gPlatformFinalPcd save only the PCDes which are
assigned in the DSC file, and the PCD that has not been assigned will
use the default value in DEC.
2.During the compilation process, gPlatformFinalPcd may be lost, and
the current code cannot selectively assign PCD in DSC by specifying ARCH.
This patch moves gPlatformFinalPcd into datapipe and modifies the
assignment logicto fix this.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: yi1 li <yi1.li@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3904
TdxDxe driver is introduced for Intel TDX feature. Unfortunately, this
driver also breaks boot process in SEV-ES guest. The root cause is in
the PciLib which is imported by TdxDxe driver.
In a SEV-ES guest the AmdSevDxe driver performs a
MemEncryptSevClearMmioPageEncMask() call against the
PcdPciExpressBaseAddress range to mark it shared/unencrypted. However,
the TdxDxe driver is loaded before the AmdSevDxe driver, and the PciLib
in TdxDxe is DxePciLibI440FxQ35 which will access the
PcdPciExpressBaseAddress range. Since the range has not been marked
shared/unencrypted, the #VC handler terminates the guest for trying to
do MMIO to an encrypted region.
Adjusting the load sequence of TdxDxe and AmdSevDxe can fix the issue.
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
SEV-Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
TDX-Tested-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3902
Bad IO performance in SEC phase is observed after TDX features was
introduced. (after commit b6b2de8848 - "MdePkg: Support mmio for
Tdx guest in BaseIoLibIntrinsic").
This is because IsTdxGuest() will be called in each MMIO operation.
It is trying to cache the result of the probe in the efi data segment.
However, that doesn't work in SEC, because the data segment is read only
(so the write seems to succeed but a read will always return the
original value), leading to us calling TdIsEnabled() check for every
mmio we do, which is causing the slowdown because it's very expensive.
This patch is to call CcProbe instead of TdIsEnabled in IsTdxGuest.
Null instance of CcProbe always returns CCGuestTypeNonEncrypted. Its
OvmfPkg version returns the guest type in Ovmf work area.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3893
1.Added EFIAPI to FspNotifyPhasePeimEntryPoint, SwapStack and
PEI_CORE_ENTRY.
2.Treat both MAX_ADDRESS and MAX_UINT32 as invalid address for
FSP global data in FspApiCallingCheck().
3.Changed AsmReadEsp to AsmReadStackPointer.
4.Changed the type of the return value of AsmReadStackPointer
from UINT32 to UINTN.
5.Changed the type of TemporaryMemoryBase, PermenentMemoryBase
and BootLoaderStack from UINT32 to UINTN.
6.Some type casting to pointers are UINT32. Changed them to
UINTN to accommodate both IA32 and X64.
7.Corrected some typos.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ashraf Ali S <ashraf.ali.s@intel.com>
Signed-off-by: Ted Kuo <ted.kuo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Synced the basetools patch from edk2 repo to
edk2-basetools repo. Update the basetools pip module version
to the latest.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
openssl 3.0 wants at least 512 bytes, otherwise it throws an error:
error:0280007E:Diffie-Hellman routines::modulus too small
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
strcpy() returns a pointer to the destination string, AsciiStrCpyS()
does not. So a simple #define does not work. Create a function
instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Add dummy MODULESDIR #define
Will be needed by openssl 3.0.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Add define for UINT_MAX.
Will be needed by openssl 3.0.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Add #define for INT_MIN.
Will be needed by openssl 3.0.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Add #define for strstr().
Will be needed by openssl 3.0.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Add fcntl.h header file.
Will be needed by openssl 3.0.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
The payload entry module should support to build as IA32 image
beside X64 image so that it could work with 32bit bootloaders.
This patch adds a option build parameter for arch selection.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Don't assume a 64bit register always holds an address greater than 4GB.
Check the value in the register and decide which Aperature it should be
assigned to.
Fixes assertion
"ASSERT [PciHostBridgeDxe] Bridge->MemAbove4G.Base >= 0x0000000100000000ULL".
Tested with coreboot as bootloader on platforms that have PCI resource
above 4GiB and on platforms that don't have resource above 4GiB.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3500
Use efi_debugging.py Python Classes to implement EFI gdb commands:
(gdb) help efi
Commands for debugging EFI. efi <cmd>
List of efi subcommands:
efi devicepath -- Display an EFI device path.
efi guid -- Display info about EFI GUID's.
efi hob -- Dump EFI HOBs. Type 'hob -h' for more info.
efi symbols -- Load Symbols for EFI. Type 'efi_symbols -h' for more info.
efi table -- Dump EFI System Tables. Type 'table -h' for more info.
This module is coded against a generic gdb remote serial stub. It should
work with QEMU, JTAG debugger, or a generic EFI gdb remote serial stub.
No modifications of EFI is required to load symbols.
Example usage:
OvmfPkg/build.sh qemu -gdb tcp::9000
gdb -ex "target remote localhost:9000" -ex "source efi_gdb.py"
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
When default/manufacturing flag get removed from numeric varid, it can't
get default value from StructurePcd in 'UpdateDefaultSettingInFormPackage'
function since there is no EFI_IFR_DEFAULT_OP opcode in IFR file. Add a
chance to get numeric default value from StructurePcd in the case that
numeric minimum value will be used as default value.
Signed-off-by: Chen Lin Z <lin.z.chen@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Makes the following changes to enforce stricter types:
1. PrmPkg/PrmConfigDxe
The function PrmConfigEndOfDxeNotification () is used as a notify
function (of type EFI_EVENT_NOTIFY), however it has a return type
of EFI_STATUS whereas the return type should actually be VOID.
2. PrmPkg/PrmLoaderDxe
Updates the following types to be more accurate than were allowed
in the VS compiler:
* 3rd actual argument given to GetModuleContextBuffers () is
explicitly marked as CONST PRM_MODULE_CONTEXT_BUFFERS **
* 3rd actual argument given to GetContextBuffer () is
explicitly marked as CONST PRM_CONTEXT_BUFFER **
* PrmLoaderEndOfDxeNotification () return type is changed to VOID
to align with the EFI_EVENT_NOTIFY type
3. PrmPkg/Application/PrmInfo
Updates the following types to be more accurate than were allowed
in the VS compiler:
* SHELL_STATUS in ParseParameterList () is now EFI_STATUS
* 3rd actual argument given to GetModuleContextBuffers () is
explicitly marked as CONST PRM_MODULE_CONTEXT_BUFFERS **
* 3rd actual argument given to GetContextBuffer () is
explicitly marked as CONST PRM_CONTEXT_BUFFER **
Cc: Andrew Fish <afish@apple.com>
Cc: Kang Gao <kang.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Ankit Sinha <ankit.sinha@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ankit Sinha <ankit.sinha@intel.com>
Adds a new UEFI application called "PrmInfo" that allows a user
to display and test Platform Runtime Mechanism (PRM) modules.
Execute the application help command for detailed usage
instructions and examples of how to use the application:
"PrmInfo -?"
This application is intended to be helpful during PRM enabling
by allowing the user to:
1. Confirm that their firmware port of the PRM infrastructure
implemented in this package is functioning correctly.
2. Quickly get information about what PRM modules and handlers
are present on a given system.
3. Quickly test PRM handlers without booting to a fully featured
operating system.
4. Develop and exercise PRM handlers prior to the availability of
an operating system that is PRM aware.
Adds a brief section to Readme.md about the PrmInfo UEFI application
with a link to allow the reader to find more information about the
application if interested.
Cc: Andrew Fish <afish@apple.com>
Cc: Kang Gao <kang.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Ankit Sinha <ankit.sinha@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ankit Sinha <ankit.sinha@intel.com>
The PRM_MODULE_EXPORT parameterized macro allows a caller to produce
a static PRM module export descriptor structure in the binary by
simply passing PRM_HANDLER_EXPORT_ENTRY arguments with each argument
representing a PRM handler to be exported by the module.
Previously, the PRM_MODULE_EXPORT_DESCRIPTOR_STRUCT used in the
PRM_MODULE_EXPORT macro was fixed to a maximum of three handlers.
This change removes that restriction and allows the structure to
grow based on the number of PRM handlers given to the macro. This
means a local type will be customized per PRM module. The reference
type PRM_MODULE_EXPORT_DESCRIPTOR_STRUCT keeps a field at the end
that allows array access to PRM_HANDLER_EXPORT_DESCRIPTOR_STRUCT
members.
Cc: Andrew Fish <afish@apple.com>
Cc: Kang Gao <kang.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Ankit Sinha <ankit.sinha@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ankit Sinha <ankit.sinha@intel.com>
There's currently two approaches being considered for how to allocate the
context buffer passed to PRM handlers:
1. The context buffer is allocated and populated in firmware. As such, the
FW converts all pointers internal to the buffer to virtual memory
addresses at the virtual address change event. A single context buffer
pointer is given to the OS via the PRM ACPI table and the OS converts
this single physical address to a virtual address when it passes the
context buffer as a pointer to PRM handlers.
2. The context buffer is allocated and populated in the OS. The OS gets
all the information needed to populate the context buffer from other
pre-existing resources (mainly physical addresses in the PRM ACPI
table). The OS converts all the physical addresses to virtual addresses,
allocates the context buffer instances, and fills in the information.
The OS passes the context buffer virtual address to PRM handlers.
The prior behavior was (1). The current POR behavior has moved to (2).
Until (2) is used more widely, it can be kept around with fairly minimal
overhead via a build flag in a few places.
So the default behavior is now (2) (the expected permanent behavior) with
(1) easily enabled by defining "ALLOCATE_CONTEXT_BUFFER_IN_FW" in the
compiler defined macros. A DSC define was added in PrmPkg.dsc to set this
compiler macro in the package build.
At some point in the future, all code (and some peripheral code)
surrounded with this build flag can be removed if (2) is fully
decided upon.
Cc: Andrew Fish <afish@apple.com>
Cc: Kang Gao <kang.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Ankit Sinha <ankit.sinha@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ankit Sinha <ankit.sinha@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3812
Adds a new package to maintain Platform Runtime Mechanism (PRM)
support.
This package is intended to include generic code that provides a
common infrastructure to support PRM in firmware and a collection
of sample PRM modules that demonstrate how to use the interfaces
and other package resources to author a PRM module.
The following initial headers are included in this commit:
* Prm.h - Includes common content for PRM with no dependencies on
other PRM header files.
* PrmContextBuffer.h - Includes definitions for PRM context buffers.
Context buffers are standardized structures that point to various
resources available to a PRM handler during its execution.
* PrmDataBuffer.h - Includes definitions for PRM data buffers.
Within the context of PRM, these data buffers are composed of a
generic header followed by a variable length blob of arbitrary
data.
* PrmExportDescriptor.h - Includes definitions for creating PRM
export descriptors.
A PRM export descriptor is a structure referenced in the export
table of PRM module that contains PRM-specific metadata about the
module.
* PrmMmio.h - Includes definitions for describing MMIO ranges uses
by PRM modules.
* PrmModule.h - Includes definitions commonly used by PRM module
authors.
This file is provided to serve as a convenient include for PRM
module authors.
* PrmOsServices.h - Includes content specific to PRM OS services.
OS Services will not planned to be present in the final version
of PRM. The OS Services have been reduced to a simple debug print
function. So this is currently planned to be a temporary file to
support debugging during PRM development.
Note: Modules built for the UEFI environment can be built by Visual
Studio and non-Visual Studio toolchains. However, PRM modules
are currently only supported on Visual Studio toolchain due to
usage of export tables.
Cc: Andrew Fish <afish@apple.com>
Cc: Kang Gao <kang.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Liu Yun <yun.y.liu@intel.com>
Cc: Ankit Sinha <ankit.sinha@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ankit Sinha <ankit.sinha@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3880
Currently UncrustifyCheck.py provides the following exclusion
options:
1. Override the type of files UncrustifyCheck operates against by
default (.c and .h files). Using the "IgnoreStandardPaths"
configuration option.
2. By default, UncrustifyCheck skips files in git submodules and
ignored by git (the "SkipGitExclusions" configuration option can
override this behavior).
The goal of UncrustifyCheck is to provide consistent formatting
across the codebase. In some rare circumstances, maintainers might
need to exclude a specific file (or file pattern) within their
package. For example, a small set of auto-generated files from
another repository.
This change adds a new configuration option that can be specified
in a package CI YAML file to describe a list of files within the
package that should be ignored by UncrustifyCheck.
The configuration option is called "IgnoreFiles" and it uses similar
syntax to git ignore to ignore a list of files.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
1. Use PeiDxeDebugLibReportStatusCode library for DebugLib, and add
ReportStatusCodeLib.
2. Remove gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize
overrided in UefiPayloadPkg.dsc.
3. Change PcdHardwareErrorRecordLevel to 1
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
There are 2 configurations for TDVF to upstream. See below link for
the definitions of the 2 configurations.
https://edk2.groups.io/g/devel/message/76367
This patch-set is to enable the basic feature of Config-B in OvmfPkg.
- Add a standalone IntelTdxX64.dsc to a TDX specific directory for a
*full* feature TDVF. (Align with existing SEV)
- IntelTdx.dsc includes Tdx/Legacy OVMF basic boot capability. The
final binary can run on Tdx/Legacy OVMF.
- PEI phase is skipped.
By design in Config-B there should be more advanced features, such as:
- RTMR based measurement and measure boot.
- Remove unnecessary drivers to reduce attack surface, such as
network stack.
To make the code review more efficiency, Config-B is split into 2 waves:
- Basic feature of Config-B
- Advanced feature of Config-B
This patch contains 2 files (IntelTdxX64.dsc/IntelTdxX64.fdf) which
enable the basic feature of Config-B. In the waves of Advanced feature
of Config-B, we will re-visit these 2 files.
TDX_PEI_LESS_BOOT is defined in IntelTdxX64.dsc to indicate it boots up
without PEI phase.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
PeilessStarupLib provides a function (PeilessStartup) which brings
up both Legacy and Tdx guest from SEC phase to DXE phase. PEI phase
is skipped so that the attack surfaces are reduced as much as possible.
PeilessStartup() does below tasks:
1. Contruct the FW hoblist.
Since PEI is skipped, we must find a memory region which is the
largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
2. Initialize the platform.
3. Build various Hobs, such as SecFv Hob, DxeFv Hob, Stack Hob, etc.
4. At last DXE Core is located / loaded and transfer control to it.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3711
Discussion in https://bugzilla.tianocore.org/show_bug.cgi?id=1496 shows
that 8254TimerDxe was not written for OVMF. It was moved over from
PcAtChipsetPkg to OvmfPkg in 2019. Probably because OVMF was the only
user left.
Most likely the reason OVMF used 8254TimerDxe initially was that it could
just use the existing driver in PcAtChipsetPkg. And it simply hasn't
been changed ever.
CSM support was moved in 2019 too. (CSM support depends on 8254/8259
drivers). So 8254TimerDxe will be used when CSM_ENABLE=TRUE.
There are 4 .dsc which include the 8254Timer.
- OvmfPkg/AmdSev/AmdSevX64.dsc
- OvmfPkg/OvmfPkgIa32.dsc
- OvmfPkg/OvmfPkgIa32X64.dsc
- OvmfPkg/OvmfPkgX64.dsc
For the three OvmfPkg* configs using 8254TimerDxe with CSM_ENABLE=TRUE
and LapicTimerDxe otherwise.
For the AmdSev config it doesn't make sense to support a CSM. So use
the lapic timer unconditionally.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
The IOMMU protocol driver provides capabilities to set a DMA access
attribute and methods to allocate, free, map and unmap the DMA memory
for the PCI Bus devices.
The current IoMmuDxe driver supports DMA operations inside SEV guest.
To support DMA operation in TDX guest,
CC_GUEST_IS_XXX (PcdConfidentialComputingGuestAttr) is used to determine
if it is SEV guest or TDX guest.
Due to security reasons all DMA operations inside the SEV/TDX guest must
be performed on shared pages. The IOMMU protocol driver for the SEV/TDX
guest uses a bounce buffer to map guest DMA buffer to shared pages in
order to provide the support for DMA operations inside SEV/TDX guest.
The call of SEV or TDX specific function to set/clear EncMask/SharedBit
is determined by CC_GUEST_IS_XXX (PcdConfidentialComputingGuestAttr).
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
TdxDxe driver is dispatched early in DXE, due to being list in APRIORI.
This module is responsible for below features:
- Sets max logical cpus based on TDINFO
- Sets PCI PCDs based on resource hobs
- Set shared bit in MMIO region
- Relocate Td mailbox and set its address in MADT table.
1. Set shared bit in MMIO region
Qemu allows a ROM device to set to ROMD mode (default) or MMIO mode.
When it is in ROMD mode, the device is mapped to guest memory and
satisfies read access directly.
In EDK2 Option ROM is treated as MMIO region. So Tdx guest access
Option ROM via TDVMCALL(MMIO). But as explained above, since Qemu set
the Option ROM to ROMD mode, the call of TDVMCALL(MMIO) always return
INVALID_OPERAND. Tdvf then falls back to direct access. This requires
to set the shared bit to corresponding PageTable entry. Otherwise it
triggers GP fault.
TdxDxe's entry point is the right place to set the shared bit in MMIO
region because Option ROM has not been discoverd yet.
2. Relocate Td mailbox and set the new address in MADT Mutiprocessor
Wakeup Table.
In TDX the guest firmware is designed to publish a multiprocessor-wakeup
structure to let the guest-bootstrap processor wake up guest-application
processors with a mailbox. The mailbox is memory that the guest firmware
can reserve so each guest virtual processor can have the guest OS send
a message to them. The address of the mailbox is recorded in the MADT
table. See [ACPI].
TdxDxe registers for protocol notification
(gQemuAcpiTableNotifyProtocolGuid) to call the AlterAcpiTable(), in
which MADT table is altered by the above Mailbox address. The protocol
will be installed in AcpiPlatformDxe when the MADT table provided by
Qemu is ready. This is to maintain the simplicity of the AcpiPlatformDxe.
AlterAcpiTable is the registered function which traverses the ACPI
table list to find the original MADT from Qemu. After the new MADT is
configured and installed, the original one will be uninstalled.
[ACPI] https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model
/ACPI_Software_Programming_Model.html#multiprocessor-wakeup-structure
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In TDX the guest firmware is designed to publish a multiprocessor-wakeup
structure to let the guest-bootstrap processor wake up guest-application
processors with a mailbox. The mailbox is memory that the guest firmware
can reserve so each guest virtual processor can have the guest OS send
a message to them. The address of the mailbox is recorded in the MADT
table. See [ACPI].
To maintain the simplicity of the AcpiPlatformDxe, the MADT ACPI table
will be altered in another driver (TdxDxe) by installing a protocol
to notify that the ACPI table provided by Qemu is ready. Then in TdxDxe
a notification functioin will be called to alter the MADT table to recorded
the mailbox address.
The protocol is gQemuAcpiTableNotifyProtocolGuid.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
There are below changes in PlatformInitLib for Tdx guest:
1. Publish ram regions
In Tdx guest, the system memory is passed in TdHob by host VMM. So
the major task of PlatformTdxPublishRamRegions is to walk thru the
TdHob list and transfer the ResourceDescriptorHob and MemoryAllocationHob
to the hobs in DXE phase.
2. Build MemoryAllocationHob for Tdx Mailbox and Ovmf work area.
3. Update of PlatformAddressWidthInitialization. The physical
address width that Tdx guest supports is either 48 or 52.
4. Update of PlatformMemMapInitialization.
0xA0000 - 0xFFFFF is VGA bios region. Platform initialization marks the
region as MMIO region. Dxe code maps MMIO region as IO region.
As TDX guest, MMIO region is maps as shared. However VGA BIOS doesn't need
to be shared. Guest TDX Linux maps VGA BIOS as private and accesses for
BIOS and stuck on repeating EPT violation. VGA BIOS (more generally ROM
region) should be private. Skip marking VGA BIOA region [0xa000, 0xfffff]
as MMIO in HOB.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
There are below major changes in this commit.
1. SecEntry.nasm
In TDX BSP and APs goes to the same entry point in SecEntry.nasm.
BSP initialize the temporary stack and then jumps to SecMain, just as
legacy Ovmf does.
APs spin in a modified mailbox loop using initial mailbox structure.
Its structure defition is in OvmfPkg/Include/IndustryStandard/IntelTdx.h.
APs wait for command to see if the command is for me. If so execute the
command.
2. Sec/SecMain.c
When host VMM create the Td guest, the system memory informations are
stored in TdHob, which is a memory region described in Tdx metadata.
The system memory region in TdHob should be accepted before it can be
accessed. So the major task of this patch is to process the TdHobList
to accept the memory. After that TDVF follow the standard OVMF flow
and jump to PEI phase.
PcdUse1GPageTable is set to FALSE by default in OvmfPkgX64.dsc. It gives
no chance for Intel TDX to support 1G page table. To support 1G page
table this PCD is set to TRUE in OvmfPkgX64.dsc.
TDX_GUEST_SUPPORTED is defined in OvmfPkgX64.dsc. This macro wraps the
Tdx specific code.
TDX only works on X64, so the code is only valid in X64 arch.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
When host VMM create the Td guest, the system memory informations are
stored in TdHob, which is a memory region described in Tdx metadata.
The system memory region in TdHob should be accepted before it can be
accessed. So the newly added function (ProcessTdxHobList) is to process
the TdHobList to accept the memory. Because TdHobList is provided by
host VMM which is not trusted, so its content should be checked before
it is consumed by TDVF.
Because ProcessTdxHobList is to be called in SEC phase, so
PlatformInitLib.inf is updated to support SEC.
Note: In this patch it is BSP which accepts the pages. So there maybe
boot performance issue. There are some mitigations to this issue, such
as lazy accept, 2M accept page size, etc. We will re-visit here in the
future.
EFI_RESOURCE_MEMORY_UNACCEPTED is a new ResourceType in
EFI_HOB_RESOURCE_DESCRIPTOR. It is defined for the unaccepted memory
passed from Host VMM. This is proposed in microsoft/mu_basecore#66
files#diff-b20a11152d1ce9249c691be5690b4baf52069efadf2e2546cdd2eb663d80c9
e4R237 according to UEFI-Code-First. The proposal was approved in 2021
in UEFI Mantis, and will be added to the new PI.next specification.
Per the MdePkg reviewer's comments, before this new ResourceType is
added in the PI spec, it should not be in MdePkg. So it is now
defined as an internal implementation and will be moved to
MdePkg/Include/Pi/PiHob.h after it is added in PI spec.
See https://edk2.groups.io/g/devel/message/87641
PcdTdxAcceptPageSize is added for page accepting. Currently TDX supports
4K and 2M accept page size. The default value is 2M.
Tdx guest is only supported in X64. So for IA32 ProcessTdxHobList
just returns EFI_UNSUPPORTED.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
The intention of PlatformInitLib is to extract the common function used
in OvmfPkg/PlatformPei. This lib will be used not only in PEI phase but
also in SEC phase. SEC phase cannot use global variables between
different functions. So PlatformInfoHob is created to hold the
informations shared between functions. For example, HostBridgeDevId
corespond to mHostBridgeDevId in PlatformPei.
In this patch we will first move below global variables to
PlatformInfoHob.
- mBootMode
- mS3Supported
- mPhysMemAddressWidth
- mMaxCpuCount
- mHostBridgeDevId
- mQ35SmramAtDefaultSmbase
- mQemuUc32Base
- mS3AcpiReservedMemorySize
- mS3AcpiReservedMemoryBase
PlatformInfoHob also holds other information, for example,
PciIoBase / PciIoSize. This is because in SEC phase, PcdSetxxx
doesn't work. So we will restruct the functions which set PCDs
into two, one for PlatformInfoLib, one for PlatformPei.
So in this patch we first move global variables and PCDs to
PlatformInfoHob. All the changes are in OvmfPkg/PlatformPei.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3863
There are 3 variants of PlatformPei in OvmfPkg:
- OvmfPkg/PlatformPei
- OvmfPkg/XenPlatformPei
- OvmfPkg/Bhyve/PlatformPei/PlatformPei.inf
These PlatformPeis can share many common codes, such as
Cmos / Hob / Memory / Platform related functions. This commit
(and its following several patches) are to create a PlatformInitLib
which wraps the common code called in above PlatformPeis.
In this initial version of PlatformInitLib, below Cmos related functions
are introduced:
- PlatformCmosRead8
- PlatformCmosWrite8
- PlatformDebugDumpCmos
They correspond to the functions in OvmfPkg/PlatformPei:
- CmosRead8
- CmosWrite8
- DebugDumpCmos
Considering this PlatformInitLib will be used in SEC phase, global
variables and dynamic PCDs are avoided. We use PlatformInfoHob
to exchange information between functions.
EFI_HOB_PLATFORM_INFO is the data struct which contains the platform
information, such as HostBridgeDevId, BootMode, S3Supported,
SmmSmramRequire, etc.
After PlatformInitLib is created, OvmfPkg/PlatformPei is refactored
with this library.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel TDX architecture does not prescribe a specific software convention
to perform I/O from the guest TD. Guest TD providers have many choices to
provide I/O to the guest. The common I/O models are emulated devices,
para-virtualized devices, SRIOV devices and Direct Device assignments.
TDVF chooses para-virtualized I/O (Choice-A) which use the TDG.VP.VMCALL
function to invoke the funtions provided by the host VMM to perform I/O.
Another choice (Choice-B) is the emulation performed by the #VE handler.
There are 2 benefits of para-virtualized I/O:
1. Performance.
VMEXIT/VMENTRY is skipped so that the performance is better than #VE
handler.
2. De-couple with #VE handler.
Choice-B depends on the #VE handler which means I/O is not available
until #VE handler is installed. For example, in PEI phase #VE handler
is installed in CpuMpPei, while communication with Qemu (via I/O port)
happen earlier than it.
IoLibInternalTdx.c provides the helper functions for Tdx guest.
IoLibInternalTdxNull.c provides the null version of the helper functions.
It is included in the Non-X64 IoLib so that the build will not be broken.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
This fixes an issue where the framebuffer provided by coreboot or
slimbootloader will only work on the primary VGA device. If the
framebuffer corresponds to a different device the screen will stay black.
In addition, the code doesn't work for multiple graphic cards, has
reference to non existing functions, and is a duplication of common code.
Call EfiBootManagerConnectVideoController on every display device found,
not only the legacy VGA device. This is the same as OvmfPkg does.
Allows to display output on the framebuffer set up by firmware, which might
not be the VGA device.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
On modern platforms with TBT devices the coreboot resource allocator
opens large PCI bridge MMIO windows above 4GiB to place hotplugable
PCI BARs there as they won't fit below 4GiB. In addition modern
GPGPU devices have very big PCI bars that doesn't fit below 4GiB.
The PciHostBridgeLib made lots of assumptions about the coreboot
resource allocator that were not verified at runtime and are no
longer true.
Remove all of the 'coreboot specific' code and implement the same
logic as OvmfPkg's ScanForRootBridges.
Fixes assertion
"ASSERT [PciHostBridgeDxe] Bridge->Mem.Limit < 0x0000000100000000ULL".
Tested with coreboot as bootloader on platforms that have PCI resources
above 4GiB and on platforms that don't have resources above 4GiB.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
On windows build, need add "-DPLATFORMX64_ENABLE=TRUE" in the build
command line beside -DNETWORK_DRIVER_ENABLE=TRUE in order build
network features. So update DSC to set PLATFORMX64_ENABLE to TRUE
when building network feature.
On Linux build, DSC file should not have PcdAllowHttpConnections
without building network feature, else it would cause build error.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by Sean Rhodes <sean@starlabs.systems>
In function ?SetDevicePathEndNode?,
inlined from ?FileDevicePath? at DevicePathUtilities.c:857:5:
DevicePathUtilities.c:321:3: error: writing 4 bytes into a region of size 1 [-Werror=stringop-overflow=]
321 | memcpy (Node, &mUefiDevicePathLibEndDevicePath, sizeof (mUefiDevicePathLibEndDevicePath));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from UefiDevicePathLib.h:22,
from DevicePathUtilities.c:16:
../Include/Protocol/DevicePath.h: In function ?FileDevicePath?:
../Include/Protocol/DevicePath.h:51:9: note: destination object ?Type? of size 1
51 | UINT8 Type; ///< 0x01 Hardware Device Path.
| ^~~~
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Sdk/C/LzmaEnc.c: In function ?LzmaEnc_CodeOneMemBlock?:
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*p.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
Sdk/C/LzmaEnc.c:2828:19: error: storing the address of local variable ?outStream? in ?*(CLzmaEnc *)pp.rc.outStream? [-Werror=dangling-pointer=]
2828 | p->rc.outStream = &outStream.vt;
| ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?outStream? declared here
2811 | CLzmaEnc_SeqOutStreamBuf outStream;
| ^~~~~~~~~
Sdk/C/LzmaEnc.c:2811:28: note: ?pp? declared here
cc1: all warnings being treated as errors
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Pick up bugfixes from latest openssl release. Includes CVE-2022-0778
fix (I don't think edk2 is affected though due to EC being disabled).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
For the multiple SKU case, basetools generates multiple redundant
__FLEXIBLE_SIZE statement that is from the same line in dsc file.
This behavior causes the generated PcdValueInit.c file to have huge size,
and the compilation time is very long.
This patch is going to fix this issue.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3828
FeatureFlagExpression Support in Source section of INF file. The Pcd
value in the expression is from INF or DEC.
When a FeatureFlagExpression is present,if the expression evaluates
to TRUE,then the entry is valid. If the expression evaluates to FALSE,
then the EDK II build tools must ignore the entry.
This patch is going to add this feature.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Heng Luo <heng.luo@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Yi Li <yi1.li@intel.com>
Previous commit fixed that check in DXE, this one now for PEI.
Signed-off-by: Mara Sophie Grosch <littlefox@lf-net.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Fix the check for NVMe command set being supported by the controller.
Was problematic with qemu (6.2.0, Debian 1:6.2+dfsg-3), which sets 0xC1
in that register, making the OVMF think the NVMe controller does not
support NVMe.
Uncovered by commit 9dd14fc91c, which
changed the number of bits included in the Css register from 4 to 8.
Signed-off-by: Mara Sophie Grosch <littlefox@lf-net.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Starting from ACPI Specification Version 5.1 Errata B, the term
'Correctable' is no longer being used as an error severity of the
reported error in Chapter 18 APEI.
This commit will
a) For Acpi40.h & Acpi50.h
Add new macro EFI_ACPI_X_X_ERROR_SEVERITY_RECOVERABLE, since both the
terms 'Correctable' and 'Recoverable' are used to denote the same error
severity.
b) Header files starting from Acpi51.h to Acpi64.h
Add new macro EFI_ACPI_X_X_ERROR_SEVERITY_RECOVERABLE.
Keeps the origin EFI_ACPI_X_X_ERROR_SEVERITY_CORRECTABLE for compatibility
consideration, but add comments to mark it as deprecated and should no
longer be used.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adds following changes
1) Added support for manufacturing mode in
BIOS Characteristics Extension Byte 2.
2) Added support for slot height in
System Slot Table (type 9).
3) Updated Built-in pointing device interface with
USB, I2C and SPI.
4) Updates Onboard Devices Extended Information with
wireless LAN, bluetooth, WWAN, eMMC, NVMe and UFC.
5) Added new table Firmware Inventory Information (Type 45)
and its corresponding enum values.
6) Added new table String Property Table (Type 46)
and its corresponding enum values.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Abdul Lateef Attar <abdattar@amd.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3802
Since PRM module needs to support export table in PE-COFF, we'll
enhance GenFw tool to support this.
Add one export flag in GenFw tool. If export flag is set:
Step1: Scan ELF symbol table based on PRM module descriptor to get
descriptor offset address;
Step2: Find PRM handlers number and name in COFF file based on the
address from step1;
Step3: Write PRM info such as handler name and export RVA into COFF
export table.
PRM option currently only supports DXE RUNTIME driver and X64 arch.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Lixia Huang <lisa.huang@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
According to the Debug Port Table 2 (DBG2) specification,
February 17, 2021, the NamespaceString is a NULL terminated
ASCII string that consists of a fully qualified reference
to the object that represents the serial port device in the
ACPI namespace.
The DBG2 table generator did not populate the full device
path for the serial port device, and this results in a FWTS
test failure.
Therefore, populate the full namespace device path for the
serial port in DBG2 table.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
Tested-by: Sunny Wang <sunny.wang@arm.com>
When build option ABOVE_4G_MEMORY is set to true, nothing will change
and EDKII will use all available memory.
Setting it to false will create memory type information HOB in
payload entry, so that EDKII will reserve enough memory below 4G
for EDKII modules. This option is useful for bootloaders that are not
fully 64-bit aware such as Qubes R4.0.4 bootloader, Zorin and Proxmox.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add some documentation to the CloudHv target in order to clarify how to
use it and what to expect from it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of using the CMOS, the CloudHv platform relies on the list of
memmap entries provided through the PVH boot protocol to determine the
last RAM address below 4G.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of hardcoding the address of the RSDP in the firmware, let's
rely on the PVH structure hvm_start_info to retrieve this information.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Following the model from the Xen target, CloudHv is generated as a PVH
ELF binary to take advantage of the PVH specification, which requires
less emulation from the VMM.
The fdf include file CloudHvElfHeader.fdf.inc has been generated from
the following commands:
$ gcc -D PVH64 -o elf_gen OvmfPkg/OvmfXenElfHeaderGenerator.c
$ ./elf_gen 4194304 OvmfPkg/CloudHv/CloudHvElfHeader.fdf.inc
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
CloudHv doesn't need any VARS store, and it doesn't need the CODE
section to be generated separately either. The only thing needed is to
generate a firmware binary that can be used by Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Updating the fdf include file based on the run of the ELF header
generator. The diff from this patch is the result of:
$ gcc -o elf_gen OvmfPkg/OvmfXenElfHeaderGenerator.c
$ ./elf_gen 2097152 OvmfPkg/XenElfHeader.fdf.inc
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Instead of having the PVH ELF header part of the fdf file directly, we
move it to a dedicated include file. This is the first step in
automating the generation of the header.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Adding some flexibility to the program through optional parameters and
global define, so that other targets can use the generator.
* A global define is added so that we can choose at build time if we
want to use 32-bit or 64-bit base structures.
* A first optional parameter is added so the user can provide the
expected blob size of the generated binary.
* A second optional parameter is added so the user can specify an output
file to which the generated output will be printed.
The default behavior isn't modified.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
No need to check the interface protocol then conditionally setting,
just set it to BOOT_PROTOCOL and check for error.
This is what Linux does for HID devices as some don't follow the USB spec.
One example is the Aspeed BMC HID keyboard device, which adds a massive
boot delay without this patch as it doesn't respond to
'GetProtocolRequest'.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3818
It will have some potential issue when memory larger than 2G because
the high memory address will be fill with 0xFFFFFFFF when do the
operation of INTN + INT64 but it is 32 bit normal data in fact.
Should use same data type INT64 + INT64.
V3:
1. Use INT64 as input parameter because all date type is 64 bit
V2:
1. Force the data type to UINTN to avoid high dword be filled with
0xFFFFFFFF
2. Keep INTN because the offset may postive or negative.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Move the logic that stores starting PCI attributes and sets the
EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE attribute to
DriverBindingStart() before the memory that backs the
DMA engine is allocated.
This ensures that the DMA-backing memory is not forcibly allocated
below 4G in system address map. Otherwise the allocation fails on
platforms that do not have any memory below the 4G mark and the drive
initialisation fails.
Leave the PCI device enabling attribute logic in NvmeControllerInit()
to ensure that the device is re-enabled on reset in case it was
disabled via PCI attributes.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Tomas Pilar <quic_tpilar@quicinc.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
The SNP patch series updated the OvmfPkgX64 build but forgot the AmdSev
variant, resulting in a broken OvmfSevMetadata table.
Fixes: cca9cd3dd6 ("OvmfPkg: reserve CPUID page")
Fixes: 707c71a01b ("OvmfPkg: reserve SNP secrets page")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Use the correct PCD type for PcdPlatformBootTimeOut so it gets wired up
to the Timeout EFI variable automatically, which is how the boot manager
stores the timeout preference.
Note that this changes the default to 5 seconds, which appears to be
common across platforms.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Alex reports that the cache invalidation performed by
ArmVirtMemoryInitPeiLib takes a non-negligible amount of time at boot.
This cache invalidation used to be necessary to avoid inconsistencies
between the CPU's cached and uncached views of the permanent PEI memory
region, given that the PEI phase is where the MMU gets enabled.
The only allocations done from permanent PEI memory with the MMU off are
pages used for page tables, and since commit 748fea6279
("ArmPkg/ArmMmuLib AARCH64: invalidate page tables before populating
them"), each of those is invalidated in the caches explicitly, for
reasons described in the patch's commit log. All other allocations done
in PEI are either from temporary PEI memory, which includes the stack,
or from permanent PEI memory but after the MMU has been enabled.
This means that the cache invalidation in ArmVirtMemoryInitPeiLib is no
longer necessary, and can simply be dropped.
Reported-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3835
The commit ade62c18f4 caused a boot failure
when OVMF is build with SECURE_BOOT/SMM enabled.
This happen because the above commit extended the BaseMemEncryptSevLib.inf
to include VmgExitLib. The FvbServicesSmm uses the functions provided
by the MemEncryptSevLib to clear the memory encryption mask from the
page table. It created a dependency, as shown below
OvmfPkg/FvbServicesSmm.inf
---> MemEncryptSevLib class
---> "OvmfPkg/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf" instance
---> VmgExitLib
---> "OvmfPkg/VmgExitLib" instance
---> LocalApicLib class
---> UefiCpuPkg/BaseXApicX2ApicLib/BaseXApicX2ApicLib.inf instance
---> TimerLib class
---> "OvmfPkg/AcpiTimerLib/DxeAcpiTimerLib.inf" instance
---> PciLib class
---> "OvmfPkg/DxePciLibI440FxQ35/DxePciLibI440FxQ35.inf" instance
The LocalApicLib provides a constructor, execution of the constructor
causes an exception. The SEV-ES and SEV-SNP do not support the SMM, so
skip including the VmgExitLib chain. Use the module override to use the
VmgExitLibNull to avoid the inclusion of unneeded LocalApicLib dependency
chain in FvbServicesSmm. We ran similar issue for AmdSevDxe driver,
see commit 19914edc5a
After the patch, the dependency look like this:
OvmfPkg/FvbServicesSmm.inf
---> MemEncryptSevLib class
---> "OvmfPkg/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf" instance
---> VmgExitLib
---> "UefiCpuPkg/Library/VmgExitLibNull" instance
Fixes: ade62c18f4
Reported-by: Aaron Young <aaron.young@oracle.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
XCODE5 reported the following warning:
OvmfPkg/Library/VmgExitLib/VmgExitVcHandler.c:1895:12: note:
uninitialized use occurs here
Compacted
^^^^^^^^^
Initialize the 'Compacted' variable to fix the warning.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Building with the CLANG35 and CLANG38 toolset fails because of variables
which are set but not otherwise used in the RELEASE build.
GCC added -Wno-unused-but-set-variable back in 2016, and later added
-Wno-unused-const-variable. Add those to CLANG35_WARNING_OVERRIDES and
CLANG38_WARNING_OVERRIDES.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
When setting mVirtualMap to NULL also set mVirtualMapMaxIndex to 0.
Without that RuntimeDriverConvertPointer() will go search the ZeroPage
for EFI_MEMORY_DESCRIPTOR entries.
In case mVirtualMapMaxIndex happens to be small small enough that'll go
unnoticed, the search will not find anything and EFI_NOT_FOUND will be
returned.
In case mVirtualMapMaxIndex is big enough the search will reach the end
of the ZeroPage and trigger a page fault.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Fix a Edk2Logger.warn() message format to match the arguments.
We ran into this after a failure in PcdValueInit. The failure was
masked by a new exception, "TypeError: not all arguments converted
during string formatting".
Signed-off-by: Jake Garver <jake@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3770 (https://bugzilla.tianocore.org/show_bug.cgi?id=3770)
The PPTT parser in AcpiView incorrectly dereferences a pointer to
FlagName when trying to log an error with the PPTT cache flags, which
can lead to random crashes and other errors.
Also fix some spacing in the error message to ensure the message is
printed cleanly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3811
Remove ASSERT() statements that are triggered if a platform provides
an override of PCI ROM attached to a PCI Controller. The PCI Platform
Protocol allows the platform to provide a PCI ROM image for a PCI
Controller. This works for PCI Controllers that do not have an attached
PCI ROM, but the platform is not allowed to replace the PCI ROM for a
PCI Controller that has its own PCI ROM. Removing these ASSERT()
statements enables this additional use case.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
In AmlCodeGenReturn, the cast to AML_NODE_HEADER* in the call to
AmlSetFixedArgument is redundant because ReturnNode is already a
AML_NODE_HEADER* .
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
We never run any code at EL0, and so it would seem that any access
permissions set for EL0 (via the AP[1] attribute in the page tables) are
irrelevant. We currently set EL0 and EL1 permissions to the same value
arbitrarily.
However, this causes problems on hardware like the Apple M1 running the
MacOS hypervisor framework, which enters EL1 with SCTLR_EL1.SPAN
enabled, causing the Privileged Access Never (PAN) feature to be enabled
on any exception taken to EL1, including the IRQ exceptions that handle
our timer interrupt. When PAN is enabled, EL1 has no access to any
mappings that are also accessible to EL0, causing the firmware to crash
if it attempts to access such a mapping.
Even though it is debatable whether or not SCTLR_EL1.SPAN should be
disabled at entry or whether the firmware should put all UNKNOWN bits in
all system registers in a consistent state (which it should), using EL0
permissions serves no purpose whatsoever so let's fix that regardless.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexander Graf <agraf@csgraf.de>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Acpiview is a command line tool allowing to display, dump, or check
installed ACPI tables. Add a 'ACPIVIEW_ENABLE' switch to enable it
on an ArmVirt platform.
The switch is set for the ArmVirtKvmTool platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
A Configuration Manager that uses the Dynamic Tables framework
to generate ACPI tables for Kvmtool Guests has been provided.
This Configuration Manager uses the FdtHwInfoParser module to
parse the Kvmtool Device Tree and generate the required
Configuration Manager objects for generating the ACPI tables.
Therefore, enable ACPI table generation for Kvmtool.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3742
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add Configuration Manager to enable ACPI tables for Kvmtool
firmware. The Configuration Manager for Kvmtool uses the DT
Hardware Information Parser module (FdtHwInfoParser) to parse
the DT provided by Kvmtool. The FdtHwInfoParser parses the DT
and invokes the callback function HW_INFO_ADD_OBJECT to add
the Configuration Manager objects to the Platform Information
repository.
The information for some Configuration Manager objects may not
be available in the DT. Such objects are initialised locally
by the Configuration Manager.
Support for the following ACPI tables is provided:
- DBG2
- DSDT (Empty stub)
- FADT
- GTDT
- MADT
- SPCR
- SSDT (Cpu Hierarchy)
- SSDT (Pcie bus)
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Most ACPI tables for Kvmtool firmware are dynamically
generated. The AML code is also generated at runtime
for most components in appropriate SSDTs.
Although there may not be much to describe in the DSDT,
the DSDT table is mandatory.
Therefore, add an empty stub for DSDT.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The cpsell tool checks for unknown words in the upstream CI.
Add some new words to the list of exceptions.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
In ACPI 6.4, s6.2.13, _PRT objects describing PCI legacy interrupts
can be defined following 2 models.
In the first model, _PRT entries reference link devices. Link devices
then describe interrupts. This allows to dynamically modify
interrupts through _SRS and _PRS objects and to choose exactly the
interrupt type (level/edge triggered, active high/low).
In the second model, interrupt numbder are described in the _PRT entry.
The interrupt type is then assumed by the OS.
The Arm BSA, sE.6 "Legacy interrupts" states that PCI legacy
interrupts must be converted to SPIs, and programmed level-sensitive,
active high. Thus any OS must configure interrupts as such and there
is no need to specify the interrupt type.
Plus it is not possible to dynamically configure PCI interrupts.
Thus remove the link device generation and use the second model
for _PRT.
Suggested-by: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
In ACPI 6.4, s6.2.13, _PRT objects describing PCI legacy interrupts
can be defined following 2 models.
In the first model, _PRT entries reference link devices. Link devices
then describe interrupts. This allows to dynamically modify
interrupts through _SRS and _PRS objects and to choose exactly the
interrupt type (level/edge triggered, active high/low).
In the second model, interrupt numbers are described in the _PRT entry.
The interrupt type is then assumed by the OS.
AmlAddPrtEntry() currently only handles the first model. Make
changes to also handle the second model.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Parse the Pmu interrupts if a pmu compatible node is present,
and populate the MADT GicC structure accordingly.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Add a macro that specifies the format for printing CM_OBJECT_ID.
This allows to print the CM_OBJECT_ID is a consistent way in the
output logs.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Remove the ClusterId and CoreId fields in the ARM_CORE_INFO structure in
favor of a new Mpidr field. Update code in
ArmPlatformPkg/PrePeiCore/MainMPCore and ArmPlatformPkg/PrePi/MainMPCore.c
to use the new field and call new macros GET_MPIDR_AFF0 and GET_MPIDR_AFF1
instead.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Check whenever an EDID blob is present. In case it is get the display
resolution from it. Unless PcdVideoResolutionSource indicates the
display resolution has been set already, update
PcdVideoHorizontalResolution and PcdVideoVerticalResolution accordingly.
Also add the resolution to the mode list.
This will make OVMF boot up with the display resolution configured by
QEMU, which is 1280x800 by default. The resolution can be set using the
xres and yres properties. Here is an example for FullHD:
qemu-system-x86_64 -device VGA,xres=1920,yres=1080
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3778
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1749250
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add helper function to add a video mode to the list of modes.
Move code. Minor debug logging tweaks, no other functional
change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
All video modes in the list are 32-bit,
so drop the useless ColorDepth field.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
struct QEMU_VIDEO_MODE_DATA has all the data needed to set the video
mode, there is no need to take the extra indirection and use
struct QEMU_VIDEO_BOCHS_MODES.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
It's a UINT8 (enum) PCD telling where the PcdVideoHorizontalResolution
and PcdVideoVerticalResolution values are coming from. It can be:
0 (unset aka default from dsc file), or
1 (from PlatformConfig), or
2 (set by Video Driver).
It will be used by video drivers to avoid overriding PlatformConfig
values, or override each others values in case multiple display devices
are present.
The underlying problem this tries to solve is that the GOP protocol has
no way to indicate the preferred video mode. On physical hardware this
isn't much of a problem because using the highest resolution available
works just fine as that is typically the native display resolution
But in a virtual machine you don't want come up with a huge 4k window by
default just because the virtual vga is able to handle that. Cutting
down the video mode list isn't a great solution either as that would
also remove the modes from the platform configuration so the user
wouldn't be able to pick a resolution higher than the default any more.
So with patch drivers can use use PcdVideoHorizontalResolution and
PcdVideoVerticalResolution to indicate what the preferred display
resolution is, without overwriting the user preferences from
PlatformConfig if present.
A possible alternative approach would be to extend the GOP protocol, but
I'm not sure this is a good plan given this is mostly a problem for
virtual machines and using PCDs allows to keep this local to OvmfPkg.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
ovmf default display resolution is 800x600. This is rather small for
modern guests. qemu used 1024x768 as default for a long time and
switched the to 1280x800 recently[1] for the upcoming 7.0 release.
This patch brings ovmf in sync with the recent qemu update and likewise
switches the default to 1280x800.
[1] de72c4b7cd
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
ovmf default display resolution is 800x600. This is rather small for
modern guests. qemu used 1024x768 as default for a long time and
switched the to 1280x800 recently[1] for the upcoming 7.0 release.
This patch brings ovmf in sync with the recent qemu update and likewise
switches the default to 1280x800.
[1] de72c4b7cd
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Current, a macro CPU_TIMER_LIB_ENABLE is added to determine which timerlib
is used. BaseCpuTimerLib.inf is a better way and only fit for recent CPU.
Meanwhile, Universal Payload are only aimed to work with recent CPU.
Therefore, for Universal Payload, use the BaseCpuTimerLib by default
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3751
Current MM communicate routine from ArmPkg would conduct few checks prior
to proceeding with SMC calls. However, the inspection step is different
from PI specification.
This patch updated MM communicate input argument inspection routine to
assure that "if the `MessageLength` is zero, or too large for the MM
implementation to manage, the MM implementation must update the
`MessageLength` to reflect the size of the `Data` buffer that it can
tolerate", as described by `EFI_MM_COMMUNICATION_PROTOCOL.Communicate()`
section in PI specification.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3751
Current MM communicate routine from ArmPkg would conduct few checks prior
to proceeding with SMC calls. However, the inspection step is different
from PI specification.
This patch updated MM communicate input argument inspection routine to
assure `CommSize` represents "the size of the data buffer being passed
in" instead of the size of the data being used from data buffer, as
described by section `EFI_MM_COMMUNICATION2_PROTOCOL.Communicate()` in PI
specification.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3751
Current MM communicate routine from ArmPkg would conduct few checks prior
to proceeding with SMC calls. However, the inspection step is different
from PI specification.
This patch updated MM communicate input argument inspection routine to
assure that return code `EFI_INVALID_PARAMETER` represents "the
`CommBuffer**` parameters do not refer to the same location in memory",
as described by `EFI_MM_COMMUNICATION2_PROTOCOL.Communicate()` section
in PI specification.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Current MM communicate2 function from ArmPkg described input arguments
`CommBufferPhysical`, `CommBufferVirtual` and `CommSize` as input only,
which mismatches with the "input and output type" as in PI specification.
This change updated function descriptions of MM communite2 to match input
argument types.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Current MM communicate2 function definition described input arguments
`CommBufferPhysical`, `CommBufferVirtual` and `CommSize` as input only,
which mismatches with the "input and output type" as in PI specification.
This change updated function descriptions of MM communite2 definition to
match input argument types.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This changes is by adding 50ms delay during voltage switching from 3.3V to
1.8V, plus adding a goto Voltage33Retry for 3.3V checking and retrying.
Change is for Enabling OS boot from SD card through UEFI payload.
Signed-off-by: Aiman Rosli <muhammad.aiman.rosli@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Update the logic handling last attempt status codes from
FmpDeviceCheckImageWithStatus() implementations to account for
cases when the function return status code is EFI_SUCCESS
(since the image was checked successfully) but the ImageUpdatable
value is not valid.
In addition the following sentence is removed from the
LastAttemptStatus parameter definition for
FmpDeviceCheckImageWithStatus() since it can lead to confusion.
The expected status code value range is sufficient to implement
the library API.
"This value will only be checked when this
function returns an error."
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Since Cloud Hypervisor doesn't rely on the FwCfg mechanism, remove the
libraries imports when possible.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor does not emulate any 8259 PIC, therefore there's no
reason to load the corresponding driver for it.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't emulate any LPC bridge, therefore we simply
need to rely on the serial I/O port to be connected as a console.
It reuses the code from Xen since it's very generic.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor doesn't emulate the legacy 8254 PIT, which is why
instead of relying on it as the timer UEFI services, rely on the
XenTimerDxe implementation. This is not Xen specific, as it simply uses
the local APIC timer triggering interrupts on the vector 32.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding the new target CloudHvX64, copied directly from OvmfPkgX64. The
point is to create a target dedicated for Cloud Hypervisor rather than
trying to support both QEMU and Cloud Hypervisor on the same target.
Improvements and cleanups will be performed in follow up patches.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There are two type variable header and their size are different,
need to use matched size when calculating offset info, otherwise
it'll destroy other variables content when patching.
Signed-off-by: Chen, Lin Z <lin.z.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Read Disk does a modification of ExtMbrStartingLba with the code MultU64x32
(ExtMbrStartingLba, BlockSize) Error detection to see if ExtMbrStartingLBA
has a value of 0. This is invalid as LBA 0 = MBR. After modification, the
next time ExtMbrStartingLba is in this function if ExtMbrStartingLba is set
to 0 in the MBR it never passes the while/do evaluation It is multiplied by
0 by read disk , set to 0 by an invalid MBR and goes back to evaluation
This condition will also cause Ws19 and WS22 to hang, however Microsoft has
developed a hotfix patch that will be released in 2022
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Craig Edwards <craig.edwards@dell.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before trying to access parent root port to check ARI capabilities,
enumerator should see if Endpoint device is not Root Complex integrated
to avoid undefined parent register accesses.
Signed-off-by: Damian Bassa <damian.bassa@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
gcc-11 (fedora 35):
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c: In function ?UsbIoBulkTransfer?:
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c:277:12: error: ?UsbHcBulkTransfer? accessing 80 bytes in a region of size 8 [-Werror=stringop-overflow=]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
For GPU passthrough support we have to initialize the console after
EfiBootManagerDispatchDeferredImages() has loaded ROMs, so call it after
this. This was the calling order before the TCG physical presence support
had to be moved and the console initialized earlier so user interaction
could be supported before processing TCG physical presence opcodes.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Shivanshu Goyal <shivanshu3@gmail.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3463
In V2: Fixed patch format and uncrustify cleanup
In V1: To follow the TCG CRB protocol specification, on every CRB TPM
command completion the TPM should return to Idle state, regardless of
the CRB Idle Bypass capability reported by the TPM device.
See: TCG PC Client Device Driver Design Principles for TPM 2.0,
Version 1.0, Rev 0.27
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3515
In V4: Fixed patch format and uncrustify cleanup
In V3: Cleaned up comments, debug prints and updated patch to use the
new debug ENUM definitions.
- Replaced EFI_D_INFO with DEBUG_INFO.
- Replaced EFI_D_VERBOSE with DEBUG_VERBOSE.
In V2: Add case to RegisterHashInterfaceLib logic
RegisterHashInterfaceLib needs to correctly handle registering the HashLib
instance supported algorithm bitmap when PcdTpm2HashMask is set to zero.
The current implementation of SyncPcrAllocationsAndPcrMask() triggers
PCR bank reallocation only based on the intersection between
TpmActivePcrBanks and PcdTpm2HashMask.
When the software HashLibBaseCryptoRouter solution is used, no PCR bank
reallocation is occurring based on the supported hashing algorithms
registered by the HashLib instances.
Need to have an additional check for the intersection between the
TpmActivePcrBanks and the PcdTcg2HashAlgorithmBitmap populated by the
HashLib instances present on the platform's BIOS.
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Currently, the serial and part number of a processor are filled with
fixed PCDs. However, they may be updated dynamically according to the
information being passed from a the pre-UEFI firmware during booting.
So, this patch is to support updating these string fields from
OemMiscLib if the PCDs are empty.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Typically, the information of the SMBIOS type 1/2/3 is fetched from an
FRU device during UEFI booting intead of fixed PCDs. Therefore, this
patch is to add more HII string fields in the OemMiscLib and support
updating these SMBIOS types with the strings provided by the OemMiscLib
if the PCDs are empty.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch removes duplicate HII string definition in the
MiscSystemManufacturer.uni.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Rename TPM_ENABLE to TPM2_ENABLE so naming is in line with the
ArmVirtPkg config option name.
Add separate TPM1_ENABLE option for TPM 1.2 support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Split Tcg2ConfigPei.inf into two variants: Tcg12ConfigPei.inf with
TPM 1.2 support included and Tcg2ConfigPei.inf supporting TPM 2.0 only.
This allows x86 builds to choose whenever TPM 1.2 support should be
included or not by picking the one or the other inf file.
Switch x86 builds to Tcg12ConfigPei.inf, so they continue to
have TPM 1.2 support.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Drop TPM_CONFIG_ENABLE config option. Including TPM support in the
build without also including the TPM configuration menu is not useful.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
With this in place the tpm configuration is not duplicated for each of
our four ovmf config variants (ia32, ia32x64, x64, amdsev) and it is
easier to keep them all in sync when updating the tpm configuration.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3769
Current FvLib will hit parse issue when encountering LARGE file, then
ignore latter ffs/section, thus causing required drivers not being
dispatched. Therefore, need to add support for EFI_FFS_FILE_HEADER2
and EFI_COMMON_SECTION_HEADER2 in FvLib to fix this issue.
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The DynamicPlatRepo library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to retrieve
dynamic CmObjs among all CmObj (static CmObj for instance).
This patch add the inf file of the module and the main module
functionnalities and update the dsc file of the package.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DynamicPlatRepo library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to retrieve
dynamic CmObjs among all CmObj (static CmObj for instance).
This patch add the TokenMapper files, allowing to retrieve a CmObj
from a token/CmObjId couple.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DynamicPlatRepo library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to retrieve
dynamic CmObjs among all CmObj (static CmObj for instance).
This patch add the TokenFixer files, allowing to update the
self-token some CmObj have.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DynamicPlatRepo library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to retrieve
dynamic CmObjs among all CmObj (static CmObj for instance).
This patch add the TokenGenerator files.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DynamicPlatRepoLib library allows to handle dynamically created
CmObj. The dynamic platform repository can be in the following states:
1 - Non-initialised
2 - Transient:
Possibility to add CmObj to the platform, but not to query them.
3 - Finalised:
Possibility to query CmObj, but not to add new.
A token is allocated to each CmObj added to the dynamic platform
repository (except for reference tokens CmObj). This allows to
retrieve dynamic CmObjs among all CmObj (static CmObj for instance).
This patch defines the library interface of the DynamicPlatRepo.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Handle the EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_16550_WITH_GAS
id when generating an AML description of a serial port. The same
_HID/_CID as the EFI_ACPI_DBG2_PORT_SUBTYPE_SERIAL_FULL_16550
are generated.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Hardware information parser is an optional module defined
by the Dynamic Tables Framework. It can either parse an
XML, a Device Tree or a Json file containing the platform
hardware information to populate the platform information
repository.
FdtHwInfoParser library is an instance of a HwInfoParser
that parses a Device Tree and populates the Configuration
Manager Platform information repository.
FdtHwInfoParser library is aimed at providing a solution
for generating ACPI tables for Guest Partitions launched
by virtual machine managers (VMMs). One such use case is
Kvmtool where the Device Tree for the Guest is passed on
to the firmware by Kvmtool. The Configuration Manager for
Kvmtool firmware shall invoke the FdtHwInfoParser to parse
the Device Tree to populate the hardware information in
the Platform Info Repository. The Kvmtool Configuration
Manager can the process this information to generate the
required ACPI tables for the Guest VM.
This approach also scales well if the number of CPUs or
if the hardware configuration of the Guest partition is
varied.
FdtHwInfoParser thereby introduces 'Dynamic Tables for
Virtual Machines'.
Ref:https://bugzilla.tianocore.org/show_bug.cgi?id=3741
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
On platforms that implement PCIe, the PCIe configuration space
information must be described to a standards-based operating
system in the Memory mapped configuration space base address
Description (MCFG) table.
The PCIe information is described in the platform Device Tree,
the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/pci/
host-generic-pci.yaml
The FdtHwInfoParser implements a PCI configuration space Parser
that parses the platform Device Tree to create
CM_ARM_PCI_CONFIG_SPACE_INFO objects which are encapsulated in a
Configuration Manager descriptor object and added to the platform
information repository.
The platform Configuration Manager can then utilise this
information when generating the MCFG table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The GIC Dispatcher is the top-level component that is responsible
for invoking the respective parsers for GICC, GICD, GIC MSI Frame,
GIC ITS and the GICR.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The GIC Redistributor (GICR) structure is part of the Multiple
APIC Description Table (MADT) that enables the discovery of
GIC Redistributor base addresses by providing the Physical Base
Address of a page range containing the GIC Redistributors. More
than one GICR Structure may be presented in the MADT. The GICR
structures should only be used when describing GIC version 3 or
higher.
The GIC Redistributor information is described in the platform
Device Tree, the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a GIC Redistributor Parser that
parses the platform Device Tree to create CM_ARM_GIC_REDIST_INFO
objects which are encapsulated in a Configuration Manager
descriptor object and added to the platform information
repository.
The platform Configuration Manager can then utilise this
information when generating the MADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Arm GIC v3/v4 optionally includes support for GIC Interrupt
Translation Service (ITS). The GIC ITS Structure is part of
the Multiple APIC Description Table (MADT) that describes
the GIC Interrupt Translation service to the OS.
The GIC Interrupt Translation Service information is described
in the platform Device Tree, the bindings for which can be
found at:
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a GIC ITS Parser that parses the
platform Device Tree to create CM_ARM_GIC_ITS_INFO objects which
are encapsulated in a Configuration Manager descriptor object and
added to the platform information repository.
The platform Configuration Manager can then utilise this information
when generating the MADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Arm GIC version 2 systems that support Message Signalled Interrupts
implement GICv2m MSI frame(s). Each GICv2m MSI frame consists of a
4k page which includes registers to generate message signalled
interrupts to an associated GIC distributor. The frame also includes
registers to discover the set of distributor lines which may be
signalled by MSIs from that frame. A system may have multiple MSI
frames, and separate frames may be defined for secure and non-secure
access.
A MSI Frame structure is part of the Multiple APIC Description Table
(MADT) and must only be used to describe non-secure MSI frames.
The MSI Frame information is described in the platform Device Tree,
the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic.yaml
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a MSI Frame Parser that parses
the platform Device Tree to create CM_ARM_GIC_MSI_FRAME_INFO
objects which are encapsulated in a Configuration Manager
descriptor object and added to the platform information
repository.
The platform Configuration Manager can then utilise this
information when generating the MADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
On ARM-based systems the Generic Interrupt Controller (GIC)
manages interrupts on the system. Each interrupt is identified
in the GIC by an interrupt identifier (INTID). ACPI GSIVs map
one to one to GIC INTIDs for peripheral interrupts, whether
shared (SPI) or private (PPI). The GIC distributor provides
the routing configuration for the interrupts.
The GIC Distributor (GICD) structure is part of the Multiple
APIC Description Table (MADT) that describes the GIC
distributor to the OS. The MADT table is a mandatory table
required for booting a standards-based operating system.
The GIC Distributor information is described in the platform
Device Tree, the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic.yaml
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a GIC Distributor Parser that
parses the platform Device Tree to create CM_ARM_GICD_INFO
object which is encapsulated in a Configuration Manager
descriptor object and added to the platform information
repository.
The platform Configuration Manager can then utilise this
information when generating the MADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The GIC CPU Interface (GICC) structure is part of the Multiple
APIC Description Table (MADT) that describes the interrupt model
for the platform. The MADT table is a mandatory table required
for booting a standards-based operating system.
Arm requires the GIC interrupt model, in which the logical
processors are required to have a Processor Device object in
the DSDT, and must convey each processor's GIC information to
the OS using the GICC structure.
The CPU and GIC information is described in the platform Device
Tree, the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/arm/cpus.yaml
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic.yaml
- linux/Documentation/devicetree/bindings/interrupt-controller/
arm,gic-v3.yaml
The FdtHwInfoParser implements a GIC CPU Interface Parser that
parses the platform Device Tree to create CM_ARM_GICC_INFO
objects which are encapsulated in a Configuration Manager
descriptor object and added to the platform information
repository.
The platform Configuration Manager can then utilise this
information when generating the MADT and the SSDT CPU
information tables.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Microsoft Debug Port Table 2 (DBG2), the Serial Port Console
Redirector (SPCR) table are mandatory tables required for booting
a standards-based operating system. The DBG2 table is used by the
OS debugger while the SPCR table is used to configure the serial
terminal. Additionally, the serial ports available on a platform
for generic use also need to be described in DSDT/SSDT for an OS
to be able to use the serial ports.
The Arm Base System Architecture 1.0 specification a lists of
supported serial port hardware for Arm Platforms. This list
includes the following serial port UARTs:
- SBSA/Generic UART
- a fully 16550 compatible UART.
Along, with these the PL011 UART is the most commonly used serial
port hardware on Arm platforms.
The serial port hardware information is described in the platform
Device Tree, the bindings for which can be found at:
- linux/Documentation/devicetree/bindings/serial/serial.yaml
- linux/Documentation/devicetree/bindings/serial/8250.txt
- linux/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
- linux/Documentation/devicetree/bindings/serial/pl011.yaml
The FdtHwInfoParser implements a Serial Port Parser that parses
the platform Device Tree to create CM_ARM_SERIAL_PORT_INFO objects
with the following IDs:
- EArmObjSerialConsolePortInfo (for use by SPCR)
- EArmObjSerialDebugPortInfo (for use by DBG2)
- EArmObjSerialPortInfo (for use as generic Serial Ports)
The Serial Port for use by SPCR is selected by parsing the Device
Tree for the '/chosen' node with the 'stdout-path' property. The
next Serial Port is selected for use as the Debug Serial Port and
the remaining serial ports are used as generic serial ports.
The CM_ARM_SERIAL_PORT_INFO objects are encapsulated in Configuration
Manager descriptor objects with the respective IDs and are added to
the platform information repository.
The platform Configuration Manager can then utilise this information
when generating the DBG2, SPCR and the SSDT serial port tables.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Generic Timer Description Table (GTDT) is a mandatory table
required for booting a standards-based operating system. It
provides an OSPM with information about a system's Generic Timer
configuration. The Generic Timer (GT) is a standard timer interface
implemented on ARM processor-based systems. The GTDT provides OSPM
with information about a system's GT interrupt configurations, for
both per-processor timers, and platform (memory-mapped) timers.
The Generic Timer information is described in the platform Device
Tree. The Device Tree bindings for the Generic timers can be found
at:
- linux/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
The FdtHwInfoParser implements a Generic Timer Parser that parses
the platform Device Tree to create a CM_ARM_GENERIC_TIMER_INFO
object. The CM_ARM_GENERIC_TIMER_INFO object is encapsulated in a
Configuration Manager descriptor object and added to the platform
information repository.
The platform Configuration Manager can then utilise this information
when generating the GTDT table.
Note: The Generic Timer Parser currently does not support parsing
of memory-mapped platform timers.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The Fixed ACPI Description Table (FADT) is a mandatory table
required for booting a standards-based operating system. The
FADT table has an 'ARM Boot Architecture Flags' field that is
used by an OS at boot time to determine the code path during
boot. This field is used to specify if the platform complies
with the PSCI specification. It is also used to describe the
conduit (SMC/HVC) to be used for PSCI.
The PSCI compliance information for a platform is described
in the platform Device Tree, the bindings for which can be
found at:
- linux/Documentation/devicetree/bindings/arm/psci.yaml
The FdtHwInfoParser implements a Boot Arch Parser that parses
the platform Device Tree to create a CM_ARM_BOOT_ARCH_INFO
object. The CM_ARM_BOOT_ARCH_INFO object is encapsulated in
a Configuration Manager descriptor object and added to the
platform information repository.
The platform Configuration Manager can then utilise this
information when generating the FADT table.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The FdtHwInfoParser parses a platform Device Tree and populates
the Platform Information repository with Configuration Manager
objects.
Therefore, add a set of helper functions to simplify parsing of
the platform Device Tree.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
FdtHwInfoParserLib is an instance of the HwInfoParser. The
FdtHwInfoParser parses a platform Device Tree and populates
the Platform Information repository with Configuration
Manager objects that describe the platform hardware.
These Configuration Manager objects are encapsulated in
Configuration Manager Object Descriptors.
Therefore, add helper functions to create and free the
Configuration Manager Object descriptors.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Hardware information parser is an optional module defined
by the Dynamic Tables Framework. It can either parse an
XML, a Device Tree or a Json file containing the platform
hardware information to populate the platform information
repository.
The Configuration Manager can then utilise this information
to generate ACPI tables for the platform.
Therefore, define an interface for the HwInfoParser library
class.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
New SMC helper functions have been added to reduce the amount of
template code. Update ArmSmcPsciResetSystemLib and
Smbios/ProcessorSubClassDxe to use them.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add functions ArmCallSmc0/1/2/3 to do SMC calls with 0, 1, 2 or 3
arguments.
The functions return up to 3 values.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The version of lldb shipping with macOS Big Sur is lldb-1205.0.27.3, and
it uses python3. Update lldbefi.py to work with it, including removing
the unused 'commands' import and fixing the print statements.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Prefer the e820 map provided via qemu firmware config interface
for memory detection. Use rtc cmos only as fallback, which should
be rarely needed these days as qemu supports etc/e820 since 2013.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3593
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Add a bool parameter to ScanOrAdd64BitE820Ram to explicitly specify
whenever ScanOrAdd64BitE820Ram should add HOBs for high memory (above
4G) or scan only.
Also add a lowmem parameter so ScanOrAdd64BitE820Ram
can report the memory size below 4G.
This allows a more flexible usage of ScanOrAdd64BitE820Ram,
a followup patch will use it for all memory detection.
No functional change.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3593
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
When a CmObjDesc contains multiple objects, only the first one is
parsed as the buffer doesn't progress. Fix this.
Also check that the whole buffer has been parsed with an asset.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Introduce the following CmObj in the ArmNameSpaceObjects:
- CM_ARM_PCI_ADDRESS_MAP_INFO
- CM_ARM_PCI_INTERRUPT_MAP_INFO
These objects allow to describe address range mapping
of Pci busses and interrupt mapping of Pci devices.
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This function allows to add a node as the last node of a parent node
in an AML tree. For instance,
ASL code corresponding to NewNode:
Name (_UID, 0)
ASL code corresponding to ParentNode:
Device (PCI0) {
Name(_HID, EISAID("PNP0A08"))
}
"AmlAttachNode (ParentNode, NewNode)" will result in:
ASL code:
Device (PCI0) {
Name(_HID, EISAID("PNP0A08"))
Name (_UID, 0)
}
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
_PRT entries can describe interrupt mapping for Pci devices. The
object is described in ACPI 6.4 s6.2.13 "_PRT (PCI Routing Table)".
Add AmlCodeGenPrtEntry() helper function to add _PRT entries
to an existing _PRT object.
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add AmlCodeGenNameResourceTemplate() to generate code for a
ResourceTemplate().
AmlCodeGenNameResourceTemplate ("REST", ParentNode, NewObjectNode) is
equivalent of the following ASL code:
Name(REST, ResourceTemplate () {})
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add AmlCodeGenNamePackage() to generate code for a Package().
AmlCodeGenNamePackage ("PACK", ParentNode, NewObjectNode) is
equivalent of the following ASL code:
Name(PACK, Package () {})
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add helper functions to generate AML Resource Data describing memory
ranges. Memory ranges can be one, double or four words long. They
can be of 'normal', IO or bus number memory type. The following
APIs are exposed:
- AmlCodeGenRdDWordIo ()
- AmlCodeGenRdDWordMemory ()
- AmlCodeGenRdWordBusNumber ()
- AmlCodeGenRdQWordMemory ()
To: Sami Mujawar <sami.mujawar@arm.com>
To: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add virtio-mmio support (VirtioMmioDeviceLib and VirtioFdtDxe).
With this patch added and a new enough qemu version (6.2+) edk2
will detect virtio-mmio devices, so it is possible to boot from
storage (virtio-blk, virtio-scsi) or network (virtio-net).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
FdtClient is unhappy without a device tree, so add an empty fdt
which we can use in case etc/fdt is not present in fw_cfg.
On ARM machines a device tree is mandatory for hardware detection,
that's why FdtClient fails hard.
On microvm the device tree is only used to detect virtio-mmio devices
(this patch series) and the pcie host (future series). So edk2 can
continue with limited functionality in case no device tree is present:
no storage, no network, but serial console and direct kernel boot
works.
qemu release 6.2 & newer will provide a device tree for microvm.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3689
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Building grub.efi for AmdSev is difficult because it depends on patches
not yet merged to upstream grub. So shortcut the grub build by simply
creating an empty grub.efi file. That allows to at least build-test the
AmdSev variant.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Dov Murik <dovmurik@linux.ibm.com>
Move SettingsManager and PlatformBuilder classes to PlatformBuildLib.py
file, keep only CommonPlatform class in PlatformBuild.py. Allows
reusing these classes for other builds. Pure code motion, no functional
change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes build failure:
build.py...
/home/kraxel/projects/edk2/OvmfPkg/Bhyve/BhyveX64.dsc(...): error 1001: Module type [SEC] is not supported by library instance [/home/kraxel/projects/edk2/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf]
consumed by [/home/kraxel/projects/edk2/OvmfPkg/Sec/SecMain.inf]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3625
DxeTpm2MeasureBootLib supports TPM2 based measure boot. After
CcMeasurementProtocol is introduced, CC based measure boot needs to
be supported in DxeTpm2MeasureBootLib as well.
There are 2 major changes in this commit.
1. A platform should have only one RTS/RTR. Only one of (virtual)TPM1.2,
(virtual)TPM2.0 and CC MR exists. Then only one TCG_SERVICE_PROTOCOL,
TCG2_PROTOCOL, CC_MEASUREMENT_PROTOCOL is exposed. In this library when
do measure boot only one of TCG2_PROTOCOL / CC_MEASUREMENT_PROTOCOL
will be called. MEASURE_BOOT_PROTOCOLS is defined to store the instances
of TCG2 protocol and CC Measurement protocol.
2. CcEvent is similar to Tcg2Event except the MrIndex and PcrIndex.
So in the code Tcg2Event will be first created and intialized. If
CcMeasurementProtocol is called to do the measure boot, then CcEvent
points to Tcg2Event and the MrIndex is adjusted.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
In FvbInitialize Function,
PcdFlashNvStorageVariableBase64 PcdFlashNvStorageFtwWorkingBase
PcdFlashNvStorageFtwSpareBase will not exceed 0x100000000,
Due to truncation and variable type limitations.
That leads to the NV variable cannot be saved to the memory above 4G.
Modify as follows:
1.Remove the forced type conversion of UINT32.
2.Use UINT64 type variables.
Signed-off-by: xianglai li <lixianglai@loongson.cn>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
commit 202fb22be6 "OvmfPkg/SecMain: validate the memory used for
decompressing Fv" broke building OvmfXen with:
edk2/OvmfPkg/OvmfXen.dsc(...): error 1001: Module type [SEC] is not
supported by library instancer
[edk2/OvmfPkg/Library/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf]
consumed by [edk2/OvmfPkg/Sec/SecMain.inf]
The above commit added a reference to MemEncryptSevLib into SecMain.inf,
but OvmfXen.dsc doesn't have a MemEncryptSevLib entry for SEC. Add one
like OvmfPkgX64.dsc has.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Don't make the package Qemu centric so that we can introduce some
alternative support for other VMMs not using the fw_cfg mechanism.
This patch is purely about renaming existing files with no functional
change.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the generic entry point part out of Qemu.c to anticipate the
addition of new ways of retrieving the SMBIOS table.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
During AP bringup, just after switching to long mode, APs will do some
cpuid calls to verify that the extended topology leaf (0xB) is available
so they can fetch their x2 APIC IDs from it. In the case of SEV-ES,
these cpuid instructions must be handled by direct use of the GHCB MSR
protocol to fetch the values from the hypervisor, since a #VC handler
is not yet available due to the AP's stack not being set up yet.
For SEV-SNP, rather than relying on the GHCB MSR protocol, it is
expected that these values would be obtained from the SEV-SNP CPUID
table instead. The actual x2 APIC ID (and 8-bit APIC IDs) would still
be fetched from hypervisor using the GHCB MSR protocol however, so
introducing support for the SEV-SNP CPUID table in that part of the AP
bring-up code would only be to handle the checks/validation of the
extended topology leaf.
Rather than introducing all the added complexity needed to handle these
checks via the CPUID table, instead let the BSP do the check in advance,
since it can make use of the #VC handler to avoid the need to scan the
SNP CPUID table directly, and add a flag in ExchangeInfo to communicate
the result of this check to APs.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Ray Ni <ray.ni@intel.com>
Suggested-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
When SEV-SNP is active, a memory region mapped encrypted in the page
table must be validated before access. There are two approaches that
can be taken to validate the system RAM detected during the PEI phase:
1) Validate on-demand
OR
2) Validate before access
On-demand
=========
If memory is not validated before access, it will cause a #VC
exception with the page-not-validated error code. The VC exception
handler can perform the validation steps.
The pages that have been validated will need to be tracked to avoid
the double validation scenarios. The range of memory that has not
been validated will need to be communicated to the OS through the
recently introduced unaccepted memory type
https://github.com/microsoft/mu_basecore/pull/66, so that OS can
validate those ranges before using them.
Validate before access
======================
Since the PEI phase detects all the available system RAM, use the
MemEncryptSevSnpValidateSystemRam() function to pre-validate the
system RAM in the PEI phase.
For now, choose option 2 due to the dependency and the complexity
of the on-demand validation.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
The initial page built during the SEC phase is used by the
MemEncryptSevSnpValidateSystemRam() for the system RAM validation. The
page validation process requires using the PVALIDATE instruction; the
instruction accepts a virtual address of the memory region that needs
to be validated. If hardware encounters a page table walk failure (due
to page-not-present) then it raises #GP.
The initial page table built in SEC phase address up to 4GB. Add an
internal function to extend the page table to cover > 4GB. The function
builds 1GB entries in the page table for access > 4GB. This will provide
the support to call PVALIDATE instruction for the virtual address >
4GB in PEI phase.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide the hardware isolated
abstraction layers with a VM. The VMPL0 is the highest privilege, and
VMPL3 is the least privilege. Certain operations must be done by the
VMPL0 software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SEV-SNP support assumes that the guest is running on VMPL0.
Let's add function in the MemEncryptSevLib that can be used for checking
whether guest is booted under the VMPL0.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The guest can request the
hypervisor to add pages in the RMP table via the Page State Change VMGEXIT
defined in the GHCB specification section 2.5.1 and 4.1.6. Inside each RMP
entry is a Validated flag; this flag is automatically cleared to 0 by the
CPU hardware when a new RMP entry is created for a guest. Each VM page
can be either validated or invalidated, as indicated by the Validated
flag in the RMP entry. Memory access to a private page that is not
validated generates a #VC. A VM can use the PVALIDATE instruction to
validate the private page before using it.
During the guest creation, the boot ROM memory is pre-validated by the
AMD-SEV firmware. The MemEncryptSevSnpValidateSystemRam() can be called
during the SEC and PEI phase to validate the detected system RAM.
One of the fields in the Page State Change NAE is the RMP page size. The
page size input parameter indicates that either a 4KB or 2MB page should
be used while adding the RMP entry. During the validation, when possible,
the MemEncryptSevSnpValidateSystemRam() will use the 2MB entry. A
hypervisor backing the memory may choose to use the different page size
in the RMP entry. In those cases, the PVALIDATE instruction should return
SIZEMISMATCH. If a SIZEMISMATCH is detected, then validate all 512-pages
constituting a 2MB region.
Upon completion, the PVALIDATE instruction sets the rFLAGS.CF to 0 if
instruction changed the RMP entry and to 1 if the instruction did not
change the RMP entry. The rFlags.CF will be 1 only when a memory region
is already validated. We should not double validate a memory
as it could lead to a security compromise. If double validation is
detected, terminate the boot.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
Commit 85b8eac59b added support to ensure
that MMIO is only performed against the un-encrypted memory. If MMIO
is performed against encrypted memory, a #GP is raised.
The AmdSevDxe uses the functions provided by the MemEncryptSevLib to
clear the memory encryption mask from the page table. If the
MemEncryptSevLib is extended to include VmgExitLib then depedency
chain will look like this:
OvmfPkg/AmdSevDxe/AmdSevDxe.inf
-----> MemEncryptSevLib class
-----> "OvmfPkg/BaseMemEncryptSevLib/DxeMemEncryptSevLib.inf" instance
-----> VmgExitLib class
-----> "OvmfPkg/VmgExitLib" instance
-----> LocalApicLib class
-----> "UefiCpuPkg/BaseXApicX2ApicLib/BaseXApicX2ApicLib.inf" instance
-----> TimerLib class
-----> "OvmfPkg/AcpiTimerLib/DxeAcpiTimerLib.inf" instance
-----> PciLib class
-----> "OvmfPkg/DxePciLibI440FxQ35/DxePciLibI440FxQ35.inf" instance
-----> PciExpressLib class
-----> "MdePkg/BasePciExpressLib/BasePciExpressLib.inf" instance
The LocalApicLib provides a constructor that gets called before the
AmdSevDxe can clear the memory encryption mask from the MMIO regions.
When running under the Q35 machine type, the call chain looks like this:
AcpiTimerLibConstructor () [AcpiTimerLib]
PciRead32 () [DxePciLibI440FxQ35]
PciExpressRead32 () [PciExpressLib]
The PciExpressRead32 () reads the MMIO region. The MMIO regions are not
yet mapped un-encrypted, so the check introduced in the commit
85b8eac59b raises a #GP.
The AmdSevDxe driver does not require the access to the extended PCI
config space. Accessing a normal PCI config space, via IO port should be
sufficent. Use the module-scope override to make the AmdSevDxe use the
BasePciLib instead of BasePciExpressLib so that PciRead32 () uses the
IO ports instead of the extended config space.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
SEV-SNP firmware allows a special guest page to be populated with
guest CPUID values so that they can be validated against supported
host features before being loaded into encrypted guest memory to be
used instead of hypervisor-provided values [1].
Add handling for this in the CPUID #VC handler and use it whenever
SEV-SNP is enabled. To do so, existing CPUID handling via VmgExit is
moved to a helper, GetCpuidHyp(), and a new helper that uses the CPUID
page to do the lookup, GetCpuidFw(), is used instead when SNP is
enabled. For cases where SNP CPUID lookups still rely on fetching
specific CPUID fields from hypervisor, GetCpuidHyp() is used there as
well.
[1]: SEV SNP Firmware ABI Specification, Rev. 0.8, 8.13.2.6
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3275
An SEV-SNP guest requires that private memory (aka pages mapped encrypted)
must be validated before being accessed.
The validation process consist of the following sequence:
1) Set the memory encryption attribute in the page table (aka C-bit).
Note: If the processor is in non-PAE mode, then all the memory accesses
are considered private.
2) Add the memory range as private in the RMP table. This can be performed
using the Page State Change VMGEXIT defined in the GHCB specification.
3) Use the PVALIDATE instruction to set the Validated Bit in the RMP table.
During the guest creation time, the VMM encrypts the OVMF_CODE.fd using
the SEV-SNP firmware provided LAUNCH_UPDATE_DATA command. In addition to
encrypting the content, the command also validates the memory region.
This allows us to execute the code without going through the validation
sequence.
During execution, the reset vector need to access some data pages
(such as page tables, SevESWorkarea, Sec stack). The data pages are
accessed as private memory. The data pages are not part of the
OVMF_CODE.fd, so they were not validated during the guest creation.
There are two approaches we can take to validate the data pages before
the access:
a) Enhance the OVMF reset vector code to validate the pages as described
above (go through step 2 - 3).
OR
b) Validate the pages during the guest creation time. The SEV firmware
provides a command which can be used by the VMM to validate the pages
without affecting the measurement of the launch.
Approach #b seems much simpler; it does not require any changes to the
OVMF reset vector code.
Update the OVMF metadata with the list of regions that must be
pre-validated by the VMM before the boot.
Cc: Michael Roth <michael.roth@amd.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
When use the UsbHcAllocMemFromBlock() and UsbHcFreeMem() to allocate
memory and free memory for the UHC, it should use the corresponding host
address but not the pci bus address.
Signed-off-by: jdzhang <jdzhang@zd-tech.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3754
1. DxeCore will use ModuleInfo to install LoadedImage protocol for DxeCore.
2. DxeIpl will create the ModuleInfo of UniversalPayload. and
UniversalPayload will create the ModuleInfo of DxeCore.
3. UniversalPayload should skip the ModuleInfo from the DxeIpl to avoid
the mismatched ModuleInfo for DxeCore.
Changes:
1. Use function IsHobNeed to check if the HOB should be added
2. Add the ModuleInfo check logic in IsHobNeed function
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Add a Macro to enable performance measurement feature.
For any platform that uses UniversalPayload, we assume it supports
BaseCpuTimerLib and use it to align timerlib to get more accurate
performance result.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Current, the SystemMemoryUefiRegionSize is 32M, which means in universal
payload entry, we can at most use 32M heap.
However, this can't meet the memory requirment for 5 level page table.
In UefiPayloadPkg\UefiPayloadEntry\X64\VirtualMemory.c, we assume the
Physical Address at most has 52 bits. Using 1G table support, with 52 bits
Physical Address, to build page table, we need one page to hold 16 PML5
entries, each PML5 entry points to one page containing 512 PML4 entries.
One PML4 entry points to one page containing 512 PML3 entries. Each PML3
entries will point to 1G memory space. Totally 8209 pages are needed,
which is around 32M bytes.
Therefore, increase SystemMemoryUefiRegionSize from 32M to 64M to support
5 level page tables.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The patch removes the dep on PcdUse5LevelPageTable.
Now the payload inherits the 5-level paging setting from
bootloader in IA-32e mode and uses 4-level paging in
legacy protected mode.
This fix the potential issue when bootloader enables 5-level paging
but 64bit payload sets 4-level page table to CR3 resulting CPU
exception because PcdUse5LevelPageTable is FALSE.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3748
Adds a new CI plugin for Uncrustify. This is used to check
coding standard compliance of source code to the EDK II C Coding
Standards Specification.
An external dependency is added in the plugin directory to retrieve
the Uncrustify executable. Currently, the executable is from an edk2
fork of the application host in this repository:
https://dev.azure.com/projectmu/Uncrustify/
Note that the Uncrustify application outputs the commit ID that the
application was built from when given the --version parameter.
This ID can be mapped to the version specified in the Uncrustify CI
plugin external dependency file (uncrustify_ext_dep.yaml) such as
73.0.3 by visiting the Uncrustify edk2 fork release pipeline page
which associates the NuGet package version with the commit ID it was
built from:
https://dev.azure.com/projectmu/Uncrustify/_build
The default Uncrustify configuration files are added in the plugin
directory. Additional details are in the Readme.md file added in
the Uncrustify plugin directory.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2986
Improve the performance of EccCheck by using a temp file
instead of stdout to capture the results of the git diff
commands. If a large patch set is passed into EccCheck,
using stdout could be slow and also added the large diff
content to the build log that is redundant information.
A second performance improvement is to filter the
modified directories to remove duplicate directories.
Complex libraries and modules that have subdirectories
with sources would be scanned twice if there were source
changes in both the main directory and subdirectories.
Filter out the subdirectories from the modified directory
list when this case is detected.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2957
1. Allocate performance data table at EndOfDxe and then lock the varible
which store the table address at EndOfDxe.
2. Enlarge PCD gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize
from 0x20000 to 0x30000 in order to hold the Delta performance data
between EndOfDxe and ReadyToBoot.
3. SMM performance data is collected by DXE modules through SMM communication
at ReadyToBoot before.
Now to do SMM communication twice, one for allocating the performance
size at EndOfDxe, another is at ReadyToBoot to get SMM performance data.
4. Make SmmCorePerformanceLib rather than FirmwarePerformanceSmm to communicate
with DxeCorePerformanceLib for SMM performance data and size.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
In order to support secure boot with authenticated type variable store
and non secure boot with normal type variable store, add one flag to
switch them.
User can append '-D VPD_AUTHENTICATED_VARIABLE_STORE' to build command
to enable authenticated type varaible store.
Also, user can add 'VPD_AUTHENTICATED_VARIABLE_STORE = TRUE/FALSE' to the
defines section of Dsc file to switch authenticated/normal type variable
store.
VPD_AUTHENTICATED_VARIABLE_STORE is a new reserved key word for this function.
Signed-off-by: Chen Lin Z <lin.z.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Enhance RelocateCapsuleToRam() to skip creation of the Capsule on Disk
file name capsule if PcdSupportUpdateCapsuleReset feature is not enabled.
This avoids an EFI_UNSUPPORTED return status from UpdateCapsule() when the
file name capsule is encountered and PcdSupportUpdateCapsuleReset is FALSE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Bob Morgan <bobm@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3578 (https://bugzilla.tianocore.org/show_bug.cgi?id=3579)
Since the Common Memory Device (formerly Memory Aggregator Device) was
introduced in ACPI 5.0, the edk2 type values have not matched the
values defined in the ACPI specification.
Fix this discrepancy by aligning the code to match the specification.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Add a comment to clarify that in Acpiview the ItemPtr is not set until
after the FieldValidator has been called.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The current UEFI implementation of HTTPS during its TLS configuration
uses
EFI_TLS_VERIFY_FLAG_NO_WILDCARDS for host name verification. As per the
spec
this flag does is "to disable the match of any wildcards in the host
name". So,
certificates which are issued with wildcards(*.dm.corp.net etc) in it
will fail
the TLS host name matching. On the other hand,
EFI_TLS_VERIFY_FLAG_NONE(misnomer) means "no additional flags set for
hostname
validation. Wildcards are supported and they match only in the left-most
label."
this behavior/definition is coming from openssl's X509_check_host() api
https://www.openssl.org/docs/man1.1.0/man3/X509_check_host.html
Without EFI_TLS_VERIFY_FLAG_NONE any UEFI application using certificates
issued
with wildcards in them would fail to match while trying to communicate
with
HTTPS endpoint.
BugZilla: https://bugzilla.tianocore.org/show_bug.cgi?id=3691
Signed-off-by: Vineel Kovvuri <vineelko@microsoft.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2673
M mean that Measured Boot, V mean that Verified Boot.
The FvReport do below:
1. Do nothing if neither M nor V
2. Allocate pages to save the firmware volume and use it to install
firmware info Ppi
3. Install PreHashFv Ppi if the FV need measurement.
4. Verify the Hash if the FV need verification
Notes:
1. The component is used to verify the FV or measure the FV
2. Copy action is just for security purpose but not main purpose.
3. If you use this component, Doesn't need to copy in other compoent
which result time consumption.
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
PCH SMM module would install SMM SW dispatch2 protocol.
And it supports to register SMI handlers based on SMI APM
interrupt from the bootloader information gSmmRegisterInfoGuid.
It is possible to extend bootloader HOB to pass other information
to support more SMI sources.
If this module is not required by bootloader for some reason, the
bootloader could skip this HOB or build a HOB without EOS info.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This FVB module is used to initialize NV variable region
and provide SMM FVB protocol to read/write SPI variable region.
This module consume HOB gNvVariableInfoGuid and depends on
FlashDeviceLib for the actual SPI device operate.
During FVB initialization, it will initialize the variable region
if the variable region is not valid. And it support to write initial
variable data from FFS file if it is found.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This module is only used for SMM S3 support for the bootloader that
doesn't support SMM.
The payload would save SMM rebase info to SMM communication area in
normal boot and expect the bootloader in S3 path to rebase the SMM
and trigger SMI by writing 0xB2 port with the given value from SMM
communication area. The payload SMM handler would get chance to
restore some registers in S3 path.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This module consumes SMM Registers HOB (SMI_GBL_EN and SMI_APM_EN) to
install SMM control 2 protocol gEfiSmmControl2ProtocolGuid.
The protocol activate() would set SMI_GBL_EN and SMI_APM_EN and trigger
SMI by writing to IO port 0xB3 and 0xB2.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Intel's Trust Domain Extensions (Intel TDX) refers to an Intel technology
that extends Virtual Machines Extensions (VMX) and Multi-Key Total Memory
Encryption (MKTME) with a new kind of virutal machines guest called a
Trust Domain (TD). A TD is desinged to run in a CPU mode that protects the
confidentiality of TD memory contents and the TD's CPU state from other
software, including the hosting Virtual-Machine Monitor (VMM), unless
explicitly shared by the TD itself.
Note: Intel TDX is only available on X64, so the Tdx related changes are
in X64 path. In IA32 path, there may be null stub to make the build
success.
This patch includes below major changes.
1. Ia32/IntelTdx.asm
IntelTdx.asm includes below routines used in ResetVector
- IsTdx
Check if the running system is Tdx guest.
- InitTdxWorkarea
It initialize the TDX_WORK_AREA. Because it is called by both BSP and
APs and to avoid the race condition, only BSP can initialize the
WORK_AREA. AP will wait until the field of TDX_WORK_AREA_PGTBL_READY
is set.
- ReloadFlat32
After reset all CPUs in TDX are initialized to 32-bit protected mode.
But GDT register is not set. So this routine loads the GDT then jump
to Flat 32 protected mode again.
- InitTdx
This routine wrap above 3 routines together to do Tdx initialization
in ResetVector phase.
- IsTdxEnabled
It is a OneTimeCall to probe if TDX is enabled by checking the
CC_WORK_AREA.
- CheckTdxFeaturesBeforeBuildPagetables
This routine is called to check if it is Non-TDX guest, TDX-Bsp or
TDX-APs. Because in TDX guest all the initialization is done by BSP
(including the page tables). APs should not build the tables.
- TdxPostBuildPageTables
It is called after Page Tables are built by BSP.
byte[TDX_WORK_AREA_PGTBL_READY] is set by BSP to indicate APs can
leave spin and go.
2. Ia32/PageTables64.asm
As described above only the TDX BSP build the page tables. So
PageTables64.asm is updated to make sure only TDX BSP build the
PageTables. TDX APs will skip the page table building and set Cr3
directly.
3. Ia16/ResetVectorVtf0.asm
In Tdx all CPUs "reset" to run on 32-bit protected mode with flat
descriptor (paging disabled). But in Non-Td guest the initial state of
CPUs is 16-bit real mode. To resolve this conflict, BITS 16/32 is used
in the ResetVectorVtf0.asm. It checks the 32-bit protected mode or 16-bit
real mode, then jump to the corresponding entry point.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
In TDX when host VMM creates a new guest TD, some initial set of
TD-private pages are added using the TDH.MEM.PAGE.ADD function. These
pages typically contain Virtual BIOS code and data along with some clear
pages for stacks and heap. In the meanwhile, some configuration data
need be measured by host VMM. Tdx Metadata is designed for this purpose
to indicate host VMM how to do the above tasks.
More detailed information of Metadata is in [TDVF] Section 11.
Tdx Metadata describes the information about the image for VMM use.
For example, the base address and length of the TdHob, Bfv, Cfv, etc.
The offset of the Metadata is stored in a GUID-ed structure which is
appended in the GUID-ed chain from a fixed GPA (0xffffffd0).
In this commit there are 2 new definitions of BFV & CFV.
Tdx Virtual Firmware (TDVF) includes one Firmware Volume (FV) known
as the Boot Firmware Volume (BFV). The FV format is defined in the
UEFI Platform Initialization (PI) spec. BFV includes all TDVF
components required during boot.
TDVF also include a configuration firmware volume (CFV) that is
separated from the BFV. The reason is because the CFV is measured in
RTMR, while the BFV is measured in MRTD.
In practice BFV is the code part of Ovmf image (OVMF_CODE.fd). CFV is
the vars part of Ovmf image (OVMF_VARS.fd).
Since AMD SEV has already defined some SEV specific memory region in
MEMFD. TDX re-uses some of the memory regions defined by SEV.
- MailBox : PcdOvmfSecGhcbBackupBase|PcdOvmfSecGhcbBackupSize
- TdHob : PcdOvmfSecGhcbBase|PcdOvmfSecGhcbSize
[TDVF] https://software.intel.com/content/dam/develop/external/us/en/
documents/tdx-virtual-firmware-design-guide-rev-1.pdf
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
RFC： https://bugzilla.tianocore.org/show_bug.cgi?id=3429
Previously WORK_AREA_GUEST_TYPE was cleared in SetCr3ForPageTables64.
This is workable for Legacy guest and SEV guest. But it doesn't work
after Intel TDX is introduced. It is because all TDX CPUs (BSP and APs)
start to run from 0xfffffff0, thus WORK_AREA_GUEST_TYPE will be cleared
multi-times if it is TDX guest. So the clearance of WORK_AREA_GUEST_TYPE
is moved to Main16 entry point in Main.asm.
Note: WORK_AREA_GUEST_TYPE is only defined for ARCH_X64.
For Intel TDX, its corresponding entry point is Main32 (which will be
introduced in next commit in this patch-set). WORK_AREA_GUEST_TYPE will
be cleared there.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
LinuxBoot is a firmware that replaces specific firmware functionality
like the UEFI DXE phase with a Linux kernel and runtime. It is built-in
UEFI image like an application, which is executed at the end of DXE
phase.
To achieve the LinuxBoot boot flow "SEC->PEI->DXE->BDS->LinuxBoot",
today we use the common well-known GUID of UEFI Shell for LinuxBoot
payload, so LinuxBoot developers can effortlessly find the UEFI Shell
Application and replace it with the LinuxBoot payload without
recompiling platform EDK2 (There might be an issue with a few systems
that don't have a UEFI Shell). Also, we have a hard requirement to force
the BDS to boot into the LinuxBoot as it is essentially required that
only the LinuxBoot boot option is permissible and UEFI is an
intermediate bootstrap phase. Considering all the above, it is
reasonable to just have a new GUID for LinuxBoot and require a LinuxBoot
specific BDS implementation. In addition, with making the BDS
implementation simpler, we can reduce many DXE drivers which we think it
is not necessary for LinuxBoot booting.
This patch adds a new PlatformBootManagerLib implementation which
registers only the gArmTokenSpaceGuid.PcdLinuxBootFileGuid for LinuxBoot
payload as an active boot option. It allows BDS to jump to the LinuxBoot
quickly by skipping the UiApp and UEFI Shell.
The PlatformBootManagerLib library derived from
ArmPkg/Library/PlatformBootManagerLib.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Acked-by: Moritz Fischer <moritzf@google.com>
Building the DynamicTablesPkg with the additional
-Wpointer-arith flag triggers the following error:
"pointer of type ‘void *’ used in arithmetic
[-Werror=pointer-arith]"
Cast the void pointer to fix the error.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
In the success case we should return EFI_SUCCESS rather than returning
a potentially unitialized value of Status.
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Cc: Alexei Fedorov <Alexei.Fedorov@arm.com>
Signed-off-by: Moritz Fischer <moritzf@google.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3634
The memory allocated through "PeiAllocatePool" is located in HOB, and
in DXE phase, the HOB will be migrated to a different location.
After the migration, the data stored in the HOB stays the same, but the
address of pointer to the memory(such as the pointers in ACPI_CPU_DATA
structure) changes, which may cause "PiSmmCpuDxeSmm" driver can't find
the memory(the pointers in ACPI_CPU_DATA structure) that allocated in
"PeiRegisterCpuFeaturesLib", so use "PeiAllocatePages" to allocate
memory instead.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
V2: Fix more header files on #ifdef variable
ECC reported some issues on UefiPayloadPkg, this patch fixed
most of them except several files including ElfLib\Elf32.h,
coreboot.h, CbParseLib.c, etc.
It also removed unused functions in ResetSystemLib and Hob.c.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Currently, the flag "-fpie" is passed for all builds with a GCC
family toolchain, including CLANGPDB. CLANGPDB however does not
support this flag as it generates PE/COFF files directly.
As the flag is mostly required for ARM-specific self-relocation, drop
it for other architectures and document the limitation to enable e.g.
X64 CLANGPDB builds of StandaloneMmCore.
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Acked-by: Shi Steven <steven.shi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3680
This patch fixes the following issue:
The global variable gHandleList is a linked list.
This list is locked when a entry is added or removed from the list,
but there is no lock when iterating this list in function
CoreValidateHandle().
It can lead to "Handle.c (76): CR has Bad Signature" assertion if the
iterated entry in the list is just removed by other task during iterating.
Currently some caller functions of CoreValidateHandle() have
CoreAcquireProtocolLock(), but some caller functions of
CoreValidateHandle() do not CoreAcquireProtocolLock().
Add CoreAcquireProtocolLock() always when CoreValidateHandle() is called,
Also, A lock check is added in the CoreValidateHandle().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Add correct content to the 'SdDxeExtra.uni' file.
Include 'EmmcDxeExtra.uni' and 'SdDxeExtra.uni' files to their
appropriate INF files.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Current UefiPayloadPkg can suport PCI root bridge info HOB
provided by bootloader. For UniversalPayload, bootloader can
directly provide this HOB for payload consumption. However,
for legacy UEFI payload, it is required to migrate the HOB
information from bootloader HOB space to UEFI payload HOB
space. This patch added the missing part for the bootloader
ParseLib in order to support both legacy and universal UEFI
payload.
This patch was tested on Slim Bootloader with latest UEFI
payload, and it worked as expected.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Currently the realpath is used when parse modules, which shows the
path with a drive letter in build log. In Windows 'subst' comand is
used to associates a path with a drive letter, when use the mapped
drive letter for build, with realpath function the build log will
have different disk letter info which will cause confusion. In this
situation, if use adspath function to show the path info, it will keep
same letter with the mapped drive letter, which avoids confusion.
This patch modifies the realpath to abspath.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@Intel.com>
The patch adds entry into QueryTable.c for ProcessorUpgradeSocketLGA4677
from SMBIOS 3.5.0.
It also adds entries into QueryTable.c for ProcessorUpgradeSocketLGA4189
and ProcessorUpgradeSocketLGA1200 from SMBIOS 3.4.0.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This patch adds ProcessorUpgradeSocketLGA4677 definition into Smbios.h
from SMBIOS 3.5.0.
It also adds ProcessorUpgradeSocketLGA4189 and ProcessorUpgradeSocketLGA1200
definitions into from SMBIOS 3.4.0.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In the GIC interrupt model, logical processors are required to
have a Processor Device object in the DSDT and must convey each
processor's GIC information to the OS using the GICC structure.
Additionally, _LPI objects may be needed as they provide a method
to describe Low Power Idle states that defines the local power
states for each node in a hierarchical processor topology.
Therefore, add support to generate the CPU topology and the LPI
state information in an SSDT table.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Introduce the CM_ARM_LPI_INFO CmObj in the ArmNameSpaceObjects.
This allows to describe LPI state information, as described in
ACPI 6.4, s8.4.4.3 "_LPI (Low Power Idle States)".
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlAddLpiState() to generates AML code to add an _LPI state
to an _LPI object created using AmlCreateLpiNode().
AmlAddLpiState increments the count of LPI states in the LPI
node by one, and adds the following package:
Package() {
MinResidency,
WorstCaseWakeLatency,
Flags,
ArchFlags,
ResCntFreq,
EnableParentState,
(GenericRegisterDescriptor != NULL) ? // Entry method. If a
ResourceTemplate(GenericRegisterDescriptor) : // Register is given,
Integer, // use it. Use the
// Integer otherwise
ResourceTemplate() { // NULL Residency
Register (SystemMemory, 0, 0, 0, 0) // Counter
},
ResourceTemplate() { // NULL Usage Counter
Register (SystemMemory, 0, 0, 0, 0)
},
"" // NULL State Name
},
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
_LPI object provides a method to describe Low Power Idle
states that define the local power states for each node
in a hierarchical processor topology.
Therefore, add AmlCreateLpiNode() to generate code for a
_LPI object.
AmlCreateLpiNode ("_LPI", 0, 1, ParentNode, &LpiNode) is
equivalent of the following ASL code:
Name (_LPI, Package (
0, // Revision
1, // LevelId
0 // Count
))
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenMethodRetNameString() to generate AML code to create
a Method returning a NameString (NS).
AmlCodeGenMethodRetNameString (
"MET0", "_CRS", 1, TRUE, 3, ParentNode, NewObjectNode
);
is equivalent of the following ASL code:
Method(MET0, 1, Serialized, 3) {
Return (_CRS)
}
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenReturnNameString() to generate AML code for a
Return object node, returning the object as a NameString.
AmlCodeGenReturn ("NAM1", ParentNode, NewObjectNode) is
equivalent of the following ASL code:
Return(NAM1)
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenMethod() to generate code for a control method.
AmlCodeGenMethod ("MET0", 1, TRUE, 3, ParentNode, NewObjectNode)
is equivalent of the following ASL code:
Method(MET0, 1, Serialized, 3) {}
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
ASL provides a ResourceTemplate macro that creates a Buffer in which
resource descriptor macros can be listed. The ResourceTemplate macro
automatically generates an End descriptor and calculates the checksum
for the resource template.
Therefore, add AmlCodeGenResourceTemplate() to generate AML code for
the ResourceTemplate() macro. This function generates a Buffer node
with an EndTag resource data descriptor, which is similar to the ASL
ResourceTemplate() macro.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some AML object have a PkgLen which indicates the size of the
AML object. The package length can be encoded in 1 to 4 bytes.
The bytes used to encode the PkgLen is itself counted in the
PkgLen value. So, if an AML object's size increments/decrements,
the number of bytes used to encode the PkgLen value can itself
increment/decrement.
Therefore, a helper function AmlComputePkgLength() is introduced
to simply computation of the PkgLen.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenPackage() to generate AML code for declaring
a Package() object. This function generates an empty package
node. New elements can then be added to the package's variable
argument list.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add a helper function AmlCodeGenEndTag() to generate AML Resource Data
EndTag. The EndTag resource data is automatically generated by the ASL
compiler at the end of a list of resource data elements. Therefore, an
equivalent function is not present in ASL.
However, AmlCodeGenEndTag() is useful when generating AML code for the
ResourceTemplate() macro.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlCodeGenRegister() to generate AML code for the
Generic Register Resource Descriptor. This function is
equivalent to the ASL macro Register().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Remove the STATIC qualifier for the AmlUtility function
AmlNodeGetIntegerValue() and add the definition to the
header file so that it can be used by other AmlLib
sub-modules.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The node creation functions:
- AmlCreateRootNode()
- AmlCreateObjectNode()
- AmlCreateDataNode()
are now resetting the input pointer where the created node is stored.
Thus, it is not necessary to set some local variables to NULL or
check a node value before trying to delete it.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The following functions:
- AmlCreateRootNode()
- AmlCreateObjectNode()
- AmlCreateDataNode()
create a node and return it by populating a pointer. This pointer
should only be considered/used if the function returns successfully.
Otherwise, the value stored in this pointer should be ignored.
For their error handling, some other functions assume that this
pointer is reset to NULL if an error occurs during a node creation.
To make this assumption correct, explicitly clear this input pointer.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the data
bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
To avoid re-computing checksums, if a new resource data elements is
added/removed/modified in a list of resource data elements, the AmlLib
resets the checksum to 0.
This patch also refactors the AmlAppendRdNode() function by getting the
last Resource Data node directly instead of iterating over all the
elements of the list of Resource Data node.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Lists of Resource Data elements end with an EndTag (most of the time).
This function finds the EndTag (if present) in a list of Resource Data
elements and sets the checksum.
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the data
bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add AmlRdSetEndTagChecksum(), setting the CheckSum value contained in a
Resource Data element.
ACPI 6.4, s6.4.2.9 "End Tag":
"This checksum is generated such that adding it to the sum of all the
data bytes will produce a zero sum."
"If the checksum field is zero, the resource data is treated as if the
checksum operation succeeded. Configuration proceeds normally."
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
To fetch the Oem information from the ConfigurationManagerProtocol
and the AcpiTableInfo, and populate the SSDT ACPI header when
creating a RootNode via the AmlLib, create AddSsdtAcpiHeader().
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add parser support for the new "MinTransferSize" field of the System
Locality, Latency and Bandwidth structure, introduced by the ACPI
specification version 6.4.
Also update the HMAT parser to use the newer ACPI version 6.4
definitions.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhcihao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3666
Currently, CoreLocateHandleBuffer() follows three steps:
1) get the size of protocol database firstly
2) allocate the buffer based on the size
3) get the protocol database into the buffer
There is no lock protection for the whole three steps. If a new protocol
added in step 2) by other task, e.g. (event timer handle USB device
hotplug). The size of protocol database may be increased and cannot fit
into the previous buffer in step 3). The protocol database cannot be
returned successfully, EFI_BUFFER_TOO_SMALL error will be returned.
This patch adds the lock to protect the whole three steps.
It can make sure the correct protocol database be returned.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Dandan Bi dandan.bi@intel.com
Reviewed-by: Liming Gao gaoliming@byosoft.com.cn
Buzilla: 3565 (https://bugzilla.tianocore.org/show_bug.cgi?id=3565)
As part of the updates to ACPI 6.4 the "SBSA Generic Watchdog" was
renamed to the "Arm Generic Watchdog". This patch implements that
change by updating the GTDT generator to use Acpi64.h and renames
any occurence of "SBSA Generic Watchdog" to "Arm Generic Watchdog".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Microvm has no LPC bridge, so drop the PciSioSerialDxe driver.
Use SerialDxe instead, with ioport hardcoded to 0x3f8 aka com1 aka ttyS0.
With this tianocore boots to uefi shell prompt on the serial console.
Direct kernel boot can be used too.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3599
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
We just added the same functionality to the OvmfPkg. However, on x86, we
could use the notification mechanism around
gEfiDxeSmmReadyToLockProtocolGuid to indirectly invoke
ConfigureTpmPlatformHierarchy(). Since ARM does not have an SMM mode, we
have to use direct invocation of this function at the same place in
PlatformBootManagerBeforeConsole() as it is called on x86.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=3510
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to the SMBIOS specification, the ExtendedBiosSize field should
be zero when the BIOS size is less than 16MB:
"Size (n) where 64K * (n+1) is the size of the
physical device containing the BIOS, in
bytes.
FFh - size is 16MB or greater, see Extended
BIOS ROM Size for actual size."
Fix the code in MiscBiosVendorFunction.c to only populate the
ExtendedBiosSize field if the BIOS size is greater than 16MB.
Fix the code to correctly populate the ExtendedBiosSize field with the
unit bits set to MB if the size is between 16MB and 16GB.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Nhi Pham <nhi@os.amperecomputing.com>
Rework all the functions to to have a generic prototype:
- First take take the resource data specific arguments.
E.g.: for a Register(): the AddressSpace, BitWidth, ...
- The penultimate parameter is a NameOpNode. The resource data
created is appended to the ResourceTemplate() contained in the
NameOpNode.
- The last parameter is a pointer holding the created resource data.
A least one of the two last parameter must be provided. One of them can
be omitted. This generic interface allows to either:
- Add the resource data to a NameOpNode. This is a common case for the
Ssdt tables generator.
- Get the created resource data and let the caller place it in an AML
tree.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Some functions in the AmlLib have 'Crs' in their name and can only
be applied to '_CRS' AML objects. To re-use them on AML objects that
have different names:
- Rename them and remove the '_CRS' name check.
- Create aliases having of the 'Crs' function prototypes. These
aliases are available when DISABLE_NEW_DEPRECATED_INTERFACES
is not defined. They will be deprecated in a near future.
The deprecated functions are:
- AmlNameOpCrsGetFirstRdNode()
- AmlNameOpCrsGetNextRdNode()
- AmlCodeGenCrsAddRdInterrupt()
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
To prepare edk2 upstream CI for incoming modifications:
1- Disable the Ecc check 9005:
"Only Doxygen commands '@bug', '@todo', [...], '@{', '@}'
are allowed to mark the code Unknown doxygen command [...]"
2- Disable the Ecc check 8003 for the following keyword:
"DISABLE_NEW_DEPRECATED_INTERFACES"
Indeed, this error has been corrected on the latest version of
BaseTools, but is still triggered when using the older python
packages containing the BaseTools.
3- Add word exceptions for the cspell tool.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The correct formatter to print a CHAR8 char in edk2 is '%a'.
Replace the '%s' formatters by '%a'.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Platform information repository in the Configuration Manager
may be dynamically populated, for e.g. by a Hardware Information
Parser like FdtHwInfoParser. In such cases it is useful to trace
the CM objects that were populated by the parser.
Therefore, introduce helper functions that can parse and trace
the Configuration Manager Objects.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add a function converting a 7 characters string to its UINT32
EISAID. The algorithm used to create the EISAID is described
in the ACPI 6.4 specification, s19.3.4 "ASL Macros".
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Add HexFromAscii(), converting an hexadecimal ascii char
to an integer.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The Ecc tool forbids the usage of one char variable: Ecc error 8007:
"There should be no use of short (single character) variable names"
To follow this policy, rename this one letter parameter.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Update the inf file version and BASE_NAME of the library.
Remove unused sections.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
The TableHelperLib contains helper functions. Some rely on
DynamicTablesPkg definitions (they use Configuration Manager objects).
Some others are more generic.
To allow using these generic functions without including
DynamicTablesPkg definitions, move them to a new AcpiHelperLib
library.
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Remove asm code used for payload entry.
Use patchable PCD instead a fixed PCD PcdPayloadStackTop to avoid
potential conflict.
Based on the removal, use same HobLib regardless UNIVERSAL_PAYLOAD.
Use same PlatformHookLib regardless UNIVERSAL_PAYLOAD. The original
PlatformHookLib was removed and UniversalPayloadPlatformHookLib was
rename to new PlatformHookLib.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Activate the default console when user interaction is required for
the processing of TPM 2 physical presence interface opcodes.
Background:
TPM 2 physical presence interface (PPI) opcodes need to be handled before
the TPM 2 platform hierarchy is disabled. Due to this requirement we will
move the function call to handle the PPI opcodes into
PlatformBootManagerBeforeConsole() which runs before the initialization
of the consoles. However, since for interaction with the user we need
the console to be available, activate it now before displaying any message
to the user.
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3653
The "target.txt" and "tools_def.txt" filenames are hard-coded
at some places when global definitions are available at:
BaseTools/Source/Python/Common/TargetTxtClassObject.py:
DefaultTargetTxtFile
and
BaseTools/Source/Python/Common/ToolDefClassObject.py:
DefaultToolsDefFile
Use these global definitions instead.
Also remove the unused gBuildConfiguration and gToolsDefinition
variables from build.py
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3653
Running the following command:
python3 build/build.py -a AARCH64 -t GCC5
-p ArmPlatformPkg/ArmPlatformPkg.dsc -b DEBUG libraries
triggers the following error:
make: *** Build/ArmPlatform/DEBUG_GCC5/AARCH64/MdePkg/Library/
BasePcdLibNull/BasePcdLibNull: Is a directory. Stop.
Indeed, MakefileName is set to en empty string. Setting MakefileName
resolves the error.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Linaro no longer do gcc releases - they're done by Arm now.
Update gcc_aarch64_linux_ext_dep.yaml to fetch the latest AARCH64 gcc
release (10.3-2021.07) from their site and fix LinuxGcc5ToolChain.py with the
new GCC_AARCH64_PREFIX.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
Linaro no longer do gcc releases - they're done by Arm now.
Update gcc_arm_linux_ext_dep.yaml to fetch the latest ARM gcc release
(10.3-2021.07) from their site and fix LinuxGcc5ToolChain.py with the
new GCC_ARM_PREFIX.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
V2: Use LittleEndianStructure by review comment.
From the universal scalable firmware payload requirement V0.75,
Payload must have Universal Payload Information Section ".upld_info"
So update the build tool to add this section.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
V2: Update BuildHobFromAcpi() to return a HOB pointer.
For universal UEFI payload, build a HOB from the ACPI table, so that
other modules could use this info from HOB at very early DXE phase.
This code are shared by universal payload and non universal payload.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Guo Dong <guo.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3635
Currently, in order to test the supported attributes,
the PciTestSupportedAttribute() will set the command register
to 0x27 (EFI_PCI_COMMAND_IO_SPACE, EFI_PCI_COMMAND_MEMORY_SPACE,
EFI_PCI_COMMAND_BUS_MASTER, EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) firstly,
and then read back to check whether these attributes are
set successfully in the device.
This will cause the other enabled bits
(other than EFI_PCI_COMMAND_IO_SPACE,EFI_PCI_COMMAND_MEMORY_SPACE,
EFI_PCI_COMMAND_BUS_MASTER,EFI_PCI_COMMAND_VGA_PALETTE_SNOOP)
be cleared for a short of time
This patch fixes this issue by keeping the origina
enabled bits when setting 0x27.
Signed-off-by: xueshengfeng <xueshengfeng@byosoft.com.cn>
Reviewed-by: Ray <ray.ni@intel.com>
Add support under a pcd feature for using the new interface to pass
initrd to the linux kernel instead of via device tree.
This feature is also enabled if ACPI tables are present, and will skip
locating and installation of device tree.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Currently if mAndroidBootImg->UpdateDtb is not supported on the platform
the device tree updates of the initrd are not made.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Update AndroidBootImgBoot to use a single return point
Make sure Kernel args are freed and Image is unloaded.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Remove duplicate libfdt.h include statement in AndroidBootImgLib
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
SEC checks in IsSevGuest if the PCD defined WorkAreaHeader size
matches the size of the WorkAreaHeader struct definition. Set a
default value for the PCD to avoid unnecessary DSC/FDF file
changes in all OVMF DSC/FDF files.
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3492
Currently SecCore.inf having the resetvector code under IA32. if the
user wants to use both SecCore and UefiCpuPkg ResetVector it's not
possible, since SecCore and ResetVector(VTF0.INF/ResetVector.inf)
are sharing the same GUID which is BFV. to overcome this issue we can
create the Duplicate version of the SecCore.inf as SecCoreNative.inf
which contains pure SecCore Native functionality without resetvector.
SecCoreNative.inf should have the Unique GUID so that it can be used
along with UefiCpuPkg ResetVector in there implementation.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Cc: Digant H Solanki <digant.h.solanki@intel.com>
Cc: Sangeetha V <sangeetha.v@intel.com>
Signed-off-by: Ashraf Ali S <ashraf.ali.s@intel.com>
According to SMBIOS 3.4, section 7.5.3.3 ARM64-class CPUs, if
SMCCC_ARCH_SOC_ID is supported, the first DWORD is the JEP-106 code and
the second DWORD is the SoC revision value. But in the current
implementation, they are set in reverse. This patch is to correct it.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Rebecca Cran <rebecca@nuviainc.com>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Rebecca Cran <rebecca@nuviainc.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3473
X64 Reset Vector Code can access the memory range till 4GB using the
Linear-Address Translation to a 2-MByte Page, when user wants to use
more than 4G using 2M Page it will leads to use more number of Page
table entries. using the 1-GByte Page table user can use more than
4G Memory by reducing the page table entries using 1-GByte Page,
this patch attached can access memory range till 512GByte via Linear-
Address Translation to a 1-GByte Page.
Build Tool: if the nasm is not found it will throw Build errors like
FileNotFoundError: [WinError 2]The system cannot find the file specified
run the command wil try except block to get meaningful error message
Test Result: Tested in both Simulation environment and Hardware
both works fine without any issues.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Cc: Sangeetha V <sangeetha.v@intel.com>
Cc: Rangasai V Chaganty <rangasai.v.chaganty@intel.com>
Cc: Sahil Dureja <sahil.dureja@intel.com>
Signed-off-by: Ashraf Ali S <ashraf.ali.s@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3621
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3631
Current CPU feature initialization design:
During normal boot, CpuFeaturesPei module (inside FSP) initializes the
CPU features. During S3 boot, CpuFeaturesPei module does nothing, and
CpuSmm driver (in SMRAM) initializes CPU features instead.
This code change prevents CpuSmm driver from re-initializing CPU
features during S3 resume if CpuFeaturesPei module has done the same
initialization.
In addition, EDK2 contains DxeIpl PEIM that calls S3RestoreConfig2 PPI
during S3 boot and this PPI eventually calls CpuSmm driver (in SMRAM) to
initialize the CPU features, so "EDK2 + FSP" does not have the CPU
feature initialization issue during S3 boot. But "coreboot" does not
contain DxeIpl PEIM and the issue appears, unless
"PcdCpuFeaturesInitOnS3Resume" is set to TRUE.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Import Tcg2PlatformPei from edk2-platforms without any modifications.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Introduce the new PCD
gEfiSecurityPkgTokenSpaceGuid.PcdRandomizePlatformHierarchy.
We need it for TpmPlatformHierarchyLib.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Import Tcg2PlatformDxe from edk2-platforms without any modifications.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
VerifyBlob() has been added recently to QemuKernelLoaderFsDxe, also
QemuKernelLoaderFsDxe has been added recently to OvmfXen but without an
implementation of VerifyBlob().
Fix this by adding the same runes that have been added to
OvmfPkgX64.dsc.
Fixes: 9f3eda177a ("OvmfPkg/OvmfXen: add QemuKernelLoaderFsDxe")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Fix a typo of "memory" in a debug message in RamDiskProtocol.c.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
UefiPayloadEntry's AllocatePool() applies the "sizeof" operator to
HOB index rather than the HOB header structure. This yields 4 Bytes
compared to the 8 Bytes the structure header requires. Fix the call
to allocate the required space instead.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Marvin H?user <mhaeuser@posteo.de>
V1: Add quotes when using $(ARCH) in .dsc and .fdf file.
The quotes are added due to the way by which Core ci parse the .dsc file.
Add UINTN in Hob.c to fix cast from pointer to integer of different size error.
V2: Delete lines which reference ShellBinPkg.The pkg doesn't exist in edk2.
Cc: Guo Dong <guo.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: DunTan <dun.tan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
There are several functions in OvmfPkg/Library using
QemuFwCfgS3Enabled() to detect the S3 support status. However, in
MdeModulePkg, PcdAcpiS3Enable is used to check S3 support. Since
InitializeXenPlatform() didn't set PcdAcpiS3Enable as
InitializePlatform() did, this made the inconsistency between
drivers/functions.
For example, S3SaveStateDxe checked PcdAcpiS3Enable and skipped
S3BootScript because the default value is FALSE. On the other hand,
PlatformBootManagerBeforeConsole() from OvmfPkg/Library called
QemuFwCfgS3Enabled() and found it returned TRUE, so it invoked
SaveS3BootScript(). However, S3SaveStateDxe skipped S3BootScript, so
SaveS3BootScript() asserted due to EFI_NOT_FOUND.
This issue mainly affects "HVM Direct Kernel Boot". When used,
"fw_cfg" is enabled in QEMU and QemuFwCfgS3Enabled() returns true in
that case.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3573
Signed-off-by: Gary Lin <gary.lin@hpe.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
This commit adds code which check BootDiscoveryPolicy variable and
calls Boot Policy Manager Protocol to connect device specified by
the variable. To enable that mechanism for platform
EfiMdeModulePkgTokenSpaceGuid.PcdBootDiscoveryPolicy PCD must be
added to DSC file and BootDiscoveryPolicyUiLib should be added to
UiApp libraries.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This variable is needed to track the change to
BootDiscoveryPolicy variable. Boot options should
be refreshed only if BootDiscoveryPolicy has been
changed.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Now with everything in place for virtio 1.0 devices we can let
VirtioMmioInit() return SUCCESS.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Use QueueNumMax as QueueNum default for drivers which do not
explicitly call VIRTIO_DEVICE_PROTOCOL->SetQueueSize().
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Virtio 1.0 allows a more flexible virtio ring layout, so we have to set
addresses for descriptors avail flags and use flags separately. We
continue to use a ring layout compatible with virtio 0.9.5 though, so no
other changes are needed to setup the virtio queues.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add #defines for the Version field. Read and store the version,
log the version found as info message.
Continue to return UNSUPPORTED for now, we need some more patches
to complete virtio 1.0 support first.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add defines for the config space offsets for virtio 1.0 mmio transport.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Currently, at ExitBootServices() time, the GICv3 driver signals
End-Of-Interrupt (EOI) on all interrupt lines that are supported by the
interrupt controller. This appears to have been carried over from the
GICv2 version, but has been turned into something that violates the GIC
spec, and may trigger SError exceptions on some implementations.
Marc puts it as follows:
The GIC interrupt state machine is pretty strict. An interrupt can
only be deactivated (with or without prior priority drop) if it has
been acknowledged first. In GIC speak, this means that only the
following sequences are valid:
With EOImode==0:
x = ICC_IAR{0,1}_EL1;
ICC_EOIR{0,1}_EL1 = x;
With EOImode==1:
x = ICC_IAR{0,1}_EL1;
ICC_EOIR{0,1}_EL1 = x;
ICC_DIR_EL1 = x;
Any write to ICC_EOIR{0,1}_EL1 that isn't the direct consequence of
the same value being read from ICC_IAR{0,1}_EL1, and with the correct
nesting, breaks the state machine and leads to unpredictable results
that affects *all* interrupts in the system (most likely, the priority
system is dead). See Figure 4-3 ("Interrupt handling state machine")
in Arm IHI 0069F for a description of the acceptable transitions.
Additionally, on implementations that have ICC_CTLR_EL1.SEIS==1, a
SError may be generated to signal the error. See the various
<quote>
IMPLEMENTATION_DEFINED "SError ....";
</quote>
that are all over the pseudocode contained in the same architecture
spec. Needless to say, this is pretty final for any SW that would do
silly things on such implementations (which do exist).
Given that in our implementation, every signalled interrupt is acked,
handled and EOId in sequence, there is no reason to EOI all interrupts
at ExitBootServices() time in the first place, so let's just drop this
code. This fixes an issue reported by Marc where an SError is triggered
by this code, bringing down the system.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Map->Operation is used to select whether a DMA region that
is being bounced has the source buffer copied to it. Except
Map->Operation isn't yet set, so the behavior is somewhat
random. Instead use the passed in Operation parameter.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Adding two unit test case for UefiSortLib. One is a test on
sorting an array of UINT32 by using PerformQuickSort, another
is a test on comparing the same buffer by using StringCompare.
Add 'main' function name to ECC exception list to avoid ECC
error.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change allows to build StandaloneMmPkg components for 32bit Arm
StandaloneMm firmware.
This change mainly moves AArch64/ source files to Arm/ side directory
for several components: StandaloneMmCpu, StandaloneMmCoreEntryPoint
and StandaloneMmMemLib. The source file is built for both 32b and 64b
Arm targets.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Use intermediate (UINTN) cast when casting int from/to pointer. This
is needed as UINT64 values cast from/to 32bit pointer for 32bit
architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Change GenFv for Arm architecture to generate a specific jump
instruction as image entry instruction, when the target entry label
is assembled with Thumb instruction set. This is possible since
SecCoreEntryAddress value fetched from the PE32 has its LSBit set when
the entry instruction executes in Thumb mode.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Changes in ArmPkg to prepare building StandaloneMm firmware for
32bit Arm architectures.
Adds ArmmmuStandaloneMmLib library to the list of the standard
components build for ArmPkg on when ARM architectures.
Changes path of source file AArch64/ArmMmuStandaloneMmLib.c
and compile it for both 32bit and 64bit architectures.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Defines ARM_SVC_ID_FFA_* and ARM_SVC_ID_SP_* identifiers for 32bit
function IDs as per SMCCC specification. Defines also generic ARM
SVC identifier macros to wrap 32bit or 64bit identifiers upon target
built architecture.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Public the header file, move RefishCrtLib.h from PrivateInclude/
to Include/.
RefishCrtLib.lib will be public later. (Moved out from PrivateLibrary/)
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Bugzilla: 3516 (https://bugzilla.tianocore.org/show_bug.cgi?id=3516)
This patch introduces a header file for the ACPI specification version
6.4. Currently it is based on the Acpi63.h header file however makes
six changes:
1. Replace all occurences of "6_3"/"6.3" with "6_4/6.4".
2. Remove the trailing underscore from the header guard in accordance
with the EDK2 coding standards, section 5.3.5.
3. Make Acpi64.h the latest ACPI definition included by Acpi.h.
4. Fix the BGRT Status field comment to match the ACPI 6.3A spec.
5. Fix several typos where definitions were named "PMMT" when it should
be "PMTT".
6. Fix a typo: "PPTT Platform Communication Channel" should be "PDTT
Platform Communication Channel".
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Change the default value of the below PCDs to diable some legacy feature.
gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|FALSE
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE
gUefiCpuPkgTokenSpaceGuid.PcdCpuNumberOfReservedVariableMtrrs|0
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Define some PCDs as DynamicEX PCD to be used as global variable.
Because PcdUartDefaultBaudRate is defined as DynamicEX, remove the code
to set it in platformlib. That code was actually redundant.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Add the three PCDs as fixed at build PCD:
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister
gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister
The default value is defined as Macro, so it can be passed in at build
command.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2855
The Tpm2GetCapabilitySupportedAndActivePcrs function prints a
count number that should reflect the *supported and currently
active* PCR banks, but the implementation in place displays
instead the count of the *supported PCR banks* retrieved
directly from the Tpm2GetCapabilityPcrs()
TPML_PCR_SELECTION output.
The counter should only take into account those PCRs banks
which are active.
Replaced usage of EFI_D_* for DEBUG_* definitions in debug
messages.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Add LINUX_EFI_INITRD_MEDIA_GUID to our collection of GUID definitions,
it can be used in a media device path to specify a Linux style initrd
that can be loaded by the OS using the LoadFile2 protocol.
Move these defines to MdePkg from OvmfPkg as these are relevant to
non-OVMF targets as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
This commit add option which allows reset content of Secure Boot
keys and databases to default variables.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie> # on Raspberry Pi 4
This commits adds modules and dependencies related
to initialization and usage of default Secure Boot
key variables to SecurityPkg.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie> # on Raspberry Pi 4
This application allows user to force key enrollment from
Secure Boot default variables.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
This driver initializes default Secure Boot keys and databases
based on keys embedded in flash.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie> # on Raspberry Pi 4
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This commits add file which can be included by platform Flash
Description File. It allows to specify certificate files, which
will be embedded into binary file. The content of these files
can be used to initialize Secure Boot default keys and databases.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This commit removes functions which were added
to SecureBootVariableLib. It also adds dependecy
on that library.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
The edk2 patch
SecurityPkg: Create library for setting Secure Boot variables.
moves generic functions from SecureBootConfigDxe and places
them into SecureBootVariableLib. This patch adds SecureBootVariableLib
mapping for EmulatorPkg.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The edk2 patch
SecurityPkg: Create library for setting Secure Boot variables.
moves generic functions from SecureBootConfigDxe and places
them into SecureBootVariableLib. This patch adds SecureBootVariableLib
mapping for OvmfPkg.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
The edk2 patch
SecurityPkg: Create library for setting Secure Boot variables.
moves generic functions from SecureBootConfigDxe and places
them into SecureBootVariableLib. This patch adds SecureBootVariableLib
mapping for ArmVirtPkg platform.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This commits add library, which consist functions to
enrolll Secure Boot keys and initialize Secure Boot
default variables. Some of the functions was moved
from SecureBootConfigImpl.c file.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This commits add library, which consist helper functions related
to creation/removal Secure Boot variables. Some of the functions
was moved from SecureBootConfigImpl.c file.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This library extends Boot Maintenance Menu and allows to select
Boot Discovery Policy. When choice is made BootDiscoveryPolicy
variable is set. Platform code can use this variable to decide
which class of device shall be connected.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
In Split tool, the copy file actions only need to
copy file content but not need to copy file metadata.
copy2() copies the file metadata that causes split
unit test failed under edk2-basetools CI environment.
So this patch changes the call of copy2() to copyfile().
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
threading camelCase functions have preferred alternatives since
python2.6. python3.10 has started emitting DeprecationWarnings
for them
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This patch fixes two issues below:
1. SCT SetTime_Func failures.
- https://github.com/pftf/RPi4/issues/164
2. Using shell time and date commands to set time can't work.
The problem is that gRT->SetTime always returns EFI_INVALID_PARAMETER
error status.
The root cause is that LibSetTime() sets RtcEpochSeconds variable with
inconsistent attributes. One is without EFI_VARIABLE_NON_VOLATILE,
the other one is with EFI_VARIABLE_NON_VOLATILE. That caused that the
variable driver returns EFI_INVALID_PARAMETER. Per UEFI spec, if a
preexisting variable is rewritten with different attributes,
SetVariable() shall not modify the variable and shall return
EFI_INVALID_PARAMETER.
Therefore, the solution is to add EFI_VARIABLE_NON_VOLATILE attribute
to the first EfiSetVariable() call to make two calls consistent.
By the way, this patch also fix a minor issue with a debug message.
Signed-off-by: Sunny Wang <sunny.wang@arm.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie>
* Update GetMaintainer.py to support an optional GitHub ID at the
end of maintainer and reviewer lines.
* Remove contents after email address from standard output
* Fix minor issue in --lookup to convert file path separators
from '\' to '/' to be compatible with regular expression
file matching.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The following changes were addressed,
1. Smbios specs 3.4.0 table-51 bit5&6, these fields moved
from specific MemoryArrayLocationCXLFlexbus10AddonCard
to generic MemoryArrayLocationCXLAddonCard
to address both CXL1.0 and 2.0 CXL revisions.
2. Smbios specs 3.4.0 table-79, The memory technology name changed
from MemoryTechnologyIntelPersistentMemory
to MemoryTechnologyIntelOptanePersistentMemory.
Signed-off-by: Thotala Gopi <gopi.thotala@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
cmd_load_symbols.py can only load symbols from FV. Add the possibility to
use UEFI console output to calculate dll load address and send
add-symbol-file commands directly to ArmDS debugger
dll load address can't be used directly from UEFI output, see comment in
DebugPeCoffExtraActionLib: "This may not work correctly if you generate
PE/COFF directly as then the Offset would not be required".
1) Use objdump -S module.dll | grep <_ModuleEntryPoint> to get offset
in dll (offset)
2) Use Entrypoint=<address> from UEFI console output (entrypoint)
3) dll load address is (entrypoint)-(offset)
Signed-off-by: Artem Kopotev <artem.kopotev@arm.com>
Tested-by: Pierre Gondois <Pierre.Gondois@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3483
This patch initializes the linked list RegisteredRamDisks in
RamDiskDxeEntryPoint before the registration of gEfiRamDiskProtocolGuid
with InstallMultipleProtocolInterfaces, allowing ramdisks to be created
via a callback installed with RegisterProtocolNotify as soon as the
protocol is registered.
Without this, calling RamDisk->Register() in the callback causes a crash:
ASSERT [RamDiskDxe] MdePkg/Library/BaseLib/LinkedList.c(75): List->ForwardLink != ((void *) 0)
Signed-off-by: Trammell Hudson <hudson@trmm.net>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The edk2 path and the workspace path are identical when running
Ecc on edk2. When running Ecc on another repository
(e.g.: edk2-platforms with edk2 as a submodule of edk2-platforms),
these directories are different. Indeed, in the latter configuration,
Ecc must run git commands on the tested repository, i.e. the workspace
directory, edk2-platforms.
Thus, rename edk2_path as workspace_path.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The BaseTools directory is currently being located as a
sub-directory of the WORKSPACE env var. This might not be
true in other environments. Cf EDKII Build Specification,
s4.1.3 "Build Process Restrictions":
There is no restriction on the location of the EDK_TOOLS_PATH,
it may be located within a directory identified as the
WORKSPACE directory, or in any other location that is
accessible on the development workstation.
Locate the BaseTools directory using EDK_TOOLS_PATH instead.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Currently, the ConvertFceToStructurePcd.py tool generate
StructurePcd dsc file with comments from UNI file including
non-ascii character. Following DSC spec, there should not have
non-ascii character in DSC file. This patch removes the non-ascii
character when adding the comment and changes the circle R to (R).
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
* Enable Mergify queue feature to support auto rebase when
'push' label is set and gauarntee that all EDK II CI checks
are run before merging in changes with linear history.
* Use status checks configured in GitHub branch protections
* Allow non EDK II Maintainers to create a PR
Requires an EDK II Maintainer to accept the change and
request merge by adding 'push' label. Only EDK II Maintainers
have ability to set/clear labels.
* Do not automatically close PRs for personal builds.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3476
parseInfFile currently reading the EFI_BASE_ADDRESS from INF, once the
address found still it's continues to read the complete inf file which
is not required. once the EFI_BASE_ADDRESS read from the INF no need to
read the INF further.
MSFT compiler can generate the map file address 8 or 16 based on which
architecture the INF is compiler. currently it's support for IA32,
modified the patchfv to support for all.
modification of few typo errors in parseModMapFile, getCurr function
required
verification : Working Fine
Signed-off-by: Ashraf Ali S <ashraf.ali.s@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Cloud Hypervisor is KVM based VMM and is implemented in rust. Just like
other VMMs it need UEFI support to let ACPI work. That's why
Cloud Hypervisor is introduced here.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
There is no device like Fw-cfg in Qemu in Cloud Hypervisor, so a specific
Acpi handler is introduced here.
The handler implemented here is in a very simple way:
1. acquire the RSDP from the PCD variable in the top ".dsc";
2. get the XSDT address from RSDP structure;
3. get the ACPI tables following the XSDT structure and install them
one by one;
4. get DSDT address from FADT and install DSDT table.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The ArmVirtPkg\PlatformHasAcpiDtDxe implementation is not common
and is specific for Qemu. So add a Cloud Hypervisor specific
version that decides whether the firmware should expose an ACPI
based or a Device Tree based hardware description to an operating
system.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add OnigurumaUefiPort.h and OnigurumaUefiPort.c into ECC exception in
MdeModulePkg.ci.yaml in order to fix CI error.
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Memory buffer that is allocated by malloc() and realloc() will be
shifted by 8 bytes because Oniguruma keeps its memory signature. This 8
bytes shift is not handled while calling free() to release memory. Add
free() function to check Oniguruma signature before release memory
because memory buffer is not touched when using calloc().
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
When enter SMM exception, there will be a stack switch only if the IST
field of the interrupt gate is set. When CET shadow stack feature is
enabled, if there is a stack switch between SMM exception and SMM, the
shadow stack token busy bit needs to be cleared when return from SMM
exception to SMM. In UEFI BIOS, only page fault exception does the stack
swith when SMM shack guard feature is enabled. The condition of clear
shadow stack token busy bit should be SMM stack guard enabled, CET shadows
stack feature enabled and page fault exception.
The shadow stack token should be initialized by UINT64.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3462
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Qihua Zhuang <qihua.zhuang@intel.com>
Cc: Daquan Dong <daquan.dong@intel.com>
Cc: Justin Tong <justin.tong@intel.com>
Cc: Tom Xu <tom.xu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Per UEFI Spec 2.8 (UEFI_Spec_2_8_final.pdf, page 114)
5.2.3 Protective MBR
Table 20. Protective MBR Partition Record protecting the entire disk
The description for BootIndicator states the following:
> Set to 0x00 to indicate a non-bootable partition. If set to any
> value other than 0x00 the behavior of this flag on non-UEFI
> systems is undefined. Must be ignored by UEFI implementations.
Unfortunately, we have been incorrectly assuming that the
BootIndicator value must be 0x00, which leads to problems
when the 'pmbr_boot' flag is set on a disk containing a GPT
(such as with GNU parted). When the flag is set, the value
changes to 0x01, causing this check to fail and the system
is rendered unbootable despite it being valid from the
perspective of the UEFI spec.
To resolve this, we drop the check for the BootIndicator
so that we stop caring about the value set there, which
restores the capability to boot such disks.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3474
Cc: Chris Murphy <chrismurphy@fedoraproject.org>
Cc: David Duncan <davdunc@amazon.com>
Cc: Lazlo Ersek <lersek@redhat.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Neal Gompa <ngompa@fedoraproject.org>
Message-Id: <20210705093603.575707-1-ngompa@fedoraproject.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
It's neccessary to allocate a Graphics Stolen Memory area to enable
GPU-Passthrough for integrated Intel GPUs. Therefore, use a new
memory layout with a static Pci32Baseaddress.
Old layout:
[... , lowmemlimit] RAM
[lowmemlimit, 0xE000 0000] PCI Space
New layout:
[... , lowmemlimit] RAM
[lowmemlimit, gsmbase ] Memory hole (may be absent)
[gsmbase , 0xC000 0000] GSM (may be absent)
[0xC000 0000, 0xE000 0000] PCI Space
Reviewed-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Corvin Köhne <c.koehne@beckhoff.com>
Message-Id: <20210705110842.14088-2-c.koehne@beckhoff.com>
Introduce the NETWORK_ISCSI_MD5_ENABLE feature test macro for NetworkPkg.
When explicitly set to FALSE, remove MD5 from IScsiDxe's CHAP algorithm
list.
Set NETWORK_ISCSI_MD5_ENABLE to TRUE by default, for compatibility
reasons. Not just to minimize the disruption for platforms that currently
include IScsiDxe, but also because RFC 7143 mandates MD5 for CHAP, and
some vendors' iSCSI targets support MD5 only.
With MD5 enabled, IScsiDxe will suggest SHA256, and then fall back to MD5
if the target requests it. With MD5 disabled, IScsiDxe will suggest
SHA256, and break off the connection (and session) if the target doesn't
support SHA256.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210629163337.14120-7-lersek@redhat.com>
Introduce the "mChapHash" table, containing the hash algorithms supported
for CHAP. Hash algos listed at the beginning of the table are preferred by
the initiator.
In ISCSI_CHAP_STEP_ONE, send such a CHAP_A value that is the
comma-separated, ordered list of algorithm identifiers from "mChapHash".
Pre-format this value string at driver startup, in the new function
IScsiCHAPInitHashList().
(In IScsiCHAPInitHashList(), also enforce that every hash algo's digest
size fit into ISCSI_CHAP_MAX_DIGEST_SIZE, as the latter controls the
digest, outgoing challenge, and hex *allocations*.)
In ISCSI_CHAP_STEP_TWO, allow the target to select one of the offered hash
algorithms, and remember the selection for the later steps. For
ISCSI_CHAP_STEP_THREE, hash the challenge from the target with the
selected hash algo.
In ISCSI_CHAP_STEP_THREE, send the correctly sized digest to the target.
If the initiator wants mutual authentication, then generate a challenge
with as many bytes as the target's digest will have, in
ISCSI_CHAP_STEP_FOUR.
In ISCSI_CHAP_STEP_FOUR (i.e., when mutual authentication is required by
the initiator), verify the target's response (digest) with the selected
algorithm.
Clear the selected hash algorithm before every login (remember that in
IScsiDxe, every login is a leading login).
There is no peer-observable change from this patch, as it only reworks the
current MD5 support into the new internal representation.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210629163337.14120-5-lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
IScsiDxe uses the ISCSI_CHAP_RSP_LEN macro for expressing the size of the
digest (16) that it solely supports at this point (MD5).
ISCSI_CHAP_RSP_LEN is used for both (a) *allocating* digest-related
buffers (binary buffers and hex encodings alike), and (b) *processing*
binary digest buffers (comparing them, filling them, reading them).
In preparation for adding other hash algorithms, split purpose (a) from
purpose (b). For purpose (a) -- buffer allocation --, introduce
ISCSI_CHAP_MAX_DIGEST_SIZE. For purpose (b) -- processing --, rely on
MD5_DIGEST_SIZE from <BaseCryptLib.h>.
Distinguishing these purposes is justified because purpose (b) --
processing -- must depend on the hashing algorithm negotiated between
initiator and target, while for purpose (a) -- allocation --, using the
maximum supported digest size is suitable. For now, because only MD5 is
supported, introduce ISCSI_CHAP_MAX_DIGEST_SIZE *as* MD5_DIGEST_SIZE.
Note that the argument for using the digest size as the size of the
outgoing challenge (in case mutual authentication is desired by the
initiator) remains in place. Because of this, the above two purposes are
distinguished for the "ISCSI_CHAP_AUTH_DATA.OutChallenge" field as well.
This patch is functionally a no-op, just yet.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Message-Id: <20210629163337.14120-4-lersek@redhat.com>
RFC 7143 explains that a single iSCSI session may use multiple TCP
connections. The first connection established is called the leading
connection. The login performed on the leading connection is called the
leading login. Before the session is considered full-featured, the leading
login must succeed. Further (non-leading) connections can be associated
with the session later.
(It's unclear to me from RFC 7143 whether the non-leading connections
require individual (non-leading) logins as well, but that particular
question is irrelevant from the perspective of this patch; see below.)
The data model in IScsiDxe exhibits some confusion, regarding connection /
session association:
- On one hand, the "ISCSI_SESSION.Conns" field is a *set* (it has type
LIST_ENTRY), and accordingly, connections can be added to, and removed
from, a session, with the IScsiAttatchConnection() and
IScsiDetatchConnection() functions.
- On the other hand, ISCSI_MAX_CONNS_PER_SESSION has value 1, therefore no
session will ever use more than 1 connection at a time (refer to
instances of "Session->MaxConnections" in
"NetworkPkg/IScsiDxe/IScsiProto.c").
This one-to-many confusion between ISCSI_SESSION and ISCSI_CONNECTION is
very visible in the CHAP logic, where the progress of the authentication
is maintained *per connection*, in the "ISCSI_CONNECTION.AuthStep" field
(with values such as ISCSI_AUTH_INITIAL, ISCSI_CHAP_STEP_ONE, etc), but
the *data* for the authentication are maintained *per session*, in the
"AuthType" and "AuthData" fields of ISCSI_SESSION. Clearly, this makes no
sense if multiple connections are eligible for logging in.
Knowing that IScsiDxe uses only one connection per session (put
differently: knowing that any connection is a leading connection, and any
login is a leading login), there is no functionality bug. But the data
model is still broken: "AuthType", "AuthData", and "AuthStep" should be
maintained at the *same* level -- be it "session-level" or "(leading)
connection-level".
Fixing this data model bug is more than what I'm signing up for. However,
I do need to add one function, in preparation for multi-hash support:
whenever a new login is attempted (put differently: whenever the leading
login is re-attempted), which always happens with a fresh connection, the
session-level authentication data needs to be rewound to a sane initial
state.
Introduce the IScsiSessionResetAuthData() function. Call it from the
central -- session-level -- IScsiSessionLogin() function, just before the
latter calls the -- connection-level -- IScsiConnLogin() function.
Right now, do nothing in IScsiSessionResetAuthData(); so functionally
speaking, the patch is a no-op.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3355
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210629163337.14120-2-lersek@redhat.com>
For R_386_RELATIVE and R_X86_64_RELATIVE, today's logic assumes that
the content pointed by the Rela->r_offset is 0 but it's not always
TRUE. We observed that linker may set the content to Rela->r_addend.
The patch removes the assertion.
There is no functionality impact for this patch.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Per ELF spec, the DT_REL/DT_RELA tag in dynamic section stores the
virtual address of the relocation section.
But today's code logic treats it as the section offset and finds
the relocation section whose offset equals to DT_REL/DT_RELA.
The logic can work when the section offset equals to the section
virtual address. But when the ELF is generated from the link script
that reserves a sizeof(pe_header) in the file beginning, the section
offset doesn't equal to section virtual address. Such logic can
not find the relocation section.
The patch fixes this bug.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3396
This is a GUI interface that can be used by users who
would like to change configuration settings directly
from the interface without having to modify the source.
This tool depends on Python GUI tool kit Tkinter.
It runs on both Windows and Linux.
The user needs to load the YAML file along with DLT file
for a specific board into the ConfigEditor, change the desired
configuration values. Finally, generate a new configuration delta
file or a config binary blob for the newly changed values to take
effect. These will be the inputs to the merge tool or the stitch
tool so that new config changes can be merged and stitched into
the final configuration blob.
This tool also supports binary update directly and display FSP
information. It is also backward compatible for BSF file format.
Running Configuration Editor:
python ConfigEditor.py
Co-authored-by: Maurice Ma <maurice.ma@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Signed-off-by: Loo Tung Lun <tung.lun.loo@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3440
The definition of EFI_MM_RESERVED_MMRAM_REGION, according to PI Spec 1.5
is also referenced in EFI_PEI_MM_CONFIGURATION_PPI. Defining this
structure as is will enforce any potential usage of MM Configuration PPI
interface to include <Protocol/MmConfiguration.h>.
This change moves this structure definition to PiMultiPhase.h, which is
already included by Protocol/MmConfiguration.h through PiMmCis.h. It also
paves way for introducing Ppi/MmConfiguration.h with proper dependency.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
When using the in-source BaseTools, edksetup.bat will exit with an
ERRORLEVEL of 1 because the line in toolsetup.bat
"%PYTHON_COMMAND% -c "import edk2basetools" >NUL 2>NUL"
fails.
Ensure ERRORLEVEL is set to 0 when edksetup.bat or toolsetup.bat is
successfully run.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Split is now a Python tool, so BaseTools\Bin\Win32\Split.exe no longer
exists. Remove the check for it from toolsetup.bat to prevent the
erroneous claim that the binary C tools are missing.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Edk2 bootloader will pass the pei pcd database, and UPL also contain a
PCD database.
Dxe PCD driver has the assumption that the two PCD database can be
catenated and the local token number should be successive。
This patch will manually fix up the UPL PCD database to meet that
assumption.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
From gUniversalPayloadExtraDataGuid Guid Hob, get the Dxe FV information,
and get the Dxe Core from the FV.
Also, make sure if there are muliple FV hob, the FV hob pointing to this FV
will be the first in the hob list.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
This patch create the UniversalPayload Entry based on the UefiPayload
Entry. It implements the logic to find a proper memory range to create the
new Hob and migrate the Hobs from Bootloader.
To make the change history clear, the logic to get the DxeCore will be in
the next patch.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
For payload entry, use PayloadEntryHobLib as HobLib and payload entry
should initialize hob base.
For DxeCore, use new added DxeHobLib as HobLib, and DxeCore will
initialize hob base.
For Dxe Driver, use new added DxeHobLib as HobLib, and use DxeHobListLib
to initialize hob base.
Adding a new library DxeHobLib + DxeHobListLib instead of using the
DxeHobLib.inf in MdePkg is because the constructor needed be separated
from DxeHobLib.
If not, when building UefiPayloadPkg, the dependency chain is as below:
DebugLib -> SerialPortLib -> PlatformHookLib -> HobLib -> DebugLib
Each library has a constructor, and this becomes a constructor circle.
To break the circle, separate the constructor from the HobLib as a new
DxeHobListLib, which won't depend on DebugLib.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Intel Platform utility Syscfg/sysfwupdt will trigger SMI
to enter BIOS interface. then BIOS invoke EncodePassword
in SMM mode to check password.
it's need sha384(in CryptSha512.c) in SMM mode.
the origin SmmCryptLib.lib size is 1389KB,
after changed, the size is 1391KB.
the origin RuntimeCryptLib.lib size is 911KB,
after changed,the size is 913KB.
in SmmCryptLib.inf and RuntimeCryptLib.inf,
change CryptSha512NULL.c to CryptSha512.c.
https://bugzilla.tianocore.org/show_bug.cgi?id=3423
Signed-off-by: xueshengfeng <xueshengfeng@byosoft.com.cn>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Previous it would hang in CpuDxe if DXE drivers are dispatched above 4GB.
Now remove the work around since the fixed in CpuDxe are merged.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Currently several DXE crash due to invalid memory resource settings.
The PciHostBridgeDxe which expects the MMCONF and PCI Aperature
to be EfiMemoryMappedIO, but currently those regions are (partly)
mapped as EfiReservedMemoryType.
coreboot and slimbootloader provide an e820 compatible memory map,
which doesn't work well with EDK2 as the e820 spec is missing MMIO regions.
In e820 'reserved' could either mean "DRAM used by boot firmware" or "MMIO
in use and not detectable by OS".
Guess Top of lower usable DRAM (TOLUD) by walking the bootloader provided
memory ranges. Memory types of RAM, ACPI and ACPI NVS below 4 GiB are used
to increment TOLUD and reserved memory ranges touching TOLUD at the base
are also assumed to be reserved DRAM, which increment TOLUD.
Then mark everything reserved below TOLUD as EfiReservedMemoryType and
everything reserved above TOLUD as EfiMemoryMappedIO.
This fixes assertions seen in PciHostBridgeDxe.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
PCIe support has been added to the Kvmtool virtual machine
manager. Therefore, enable PCIe support for Kvmtool firmware.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
PCIe support has been added to Kvmtool Virtual Machine Manager.
The PCI host bridge utility lib is used to retrieve information
about the Root Bridges in a platform.
Therefore, add an instance of PciHostBridgeUtilityLib as this is
required to enable PCIe support for Kvmtool firmware.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Many of the cache definitions in ArmLibPrivate.h are being used outside
of ArmLib, in Universal/Smbios. Move them into ArmCache.h to make them
public, and remove the include of ArmLibPrivate.h from files in
Universal/Smbios.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Per discussion with MdeModulePkg package maintainer, add
Zhiguang as one of the reviewers for ACPI and SMBIOS modules.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3445
Spellcheck was not covering all specified files due to CSpell v5 and
Node v10 incompatibility of current CI pipeline configuration.
This change switches the spellcheck for ArmPlatformPkg to AuditOnly to
avoid potentially numerous spell errors. The correction action is to be
revisited by package maintainers once the tool incompatibility is
resolved.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This is the fix of the regression issue at c6b872c6.
Based on ELF spec, readonly alloc section is .rodata section. It is used.
This fix is to add back original check logic for ELF section. Now,
the readonly alloc section and execute alloc section are regarded as .text.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Per universal payload spec, the payload is in ELF format.
The patch adds a payload loader that supports to load ELF image.
The location of extra data sections whose names start with "upld."
is stored in UNIVERSAL_PAYLOAD_EXTRA_DATA HOB.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
The payload is in ELF format per the universal payload spec.
UNIVERSAL_PAYLOAD_INFO_HEADER is stored in the ELF payload as a separate
section named ".upld_info".
Extra data needed by payload is stored in sections whose name starts
with ".upld.".
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
When passing PCD database from Edk2 boot loader to Universal Payload, the
local token number in boot loader PCD database can be different with that
in Payload PCD database.
Dynamic PCD directly use local token number, while DynamicEx will search
token number by Guid and ExTokenNumber, which are unique pair and can make
sure finding the correct token number in boot loader's PCD database.
Therefore, using DynamicEx instead of Dynamic.
Also, explicitly define some PCDs as DynamicEx, or their default type will
be Dynamic
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
If HOB contains APCI table information, entry point of AcpiTableDxe.inf
should parse the APCI table from HOB, and install these tables.
We assume the whole ACPI table
(starting with EFI_ACPI_2_0_ROOT_SYSTEM_DESCRIPTION_POINTER)
is contained by a single gEfiAcpiTableGuid HOB.
If error happens when installing ACPI table, stop installing and removing
all the tables that are already added.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The default EfiSmbiosProtocol operates on an empty SMBIOS table.
The SMBIOS tables are provided by the bootloader on UefiPayloadPkg.
Scan for existing tables in SmbiosDxe and load them if they seem valid.
This fixes the settings menu not showing any hardware information, instead
only "0 MB RAM" was displayed.
Tests showed that the OS can still see the SMBIOS tables.
SmbiosDxe will get the SMBIOS from a guid Hob.
Also will keep the SmbiosHandle if it is available.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Currently, BDS driver will link a PlatformBootManagerLib, which contains
platform specific logic. This patch get the platform specific logic from
a protocol, so that platform logic for Boot manager can be in another
binary.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
IScsiDxe (that is, the initiator) receives two hex-encoded strings from
the iSCSI target:
- CHAP_C, where the target challenges the initiator,
- CHAP_R, where the target answers the challenge from the initiator (in
case the initiator wants mutual authentication).
Accordingly, we have two IScsiHexToBin() call sites:
- At the CHAP_C decoding site, check whether the decoding succeeds. The
decoded buffer ("AuthData->InChallenge") can accommodate 1024 bytes,
which is a permissible restriction on the target, per
<https://tools.ietf.org/html/rfc7143#section-12.1.3>. Shorter challenges
from the target are acceptable.
- At the CHAP_R decoding site, enforce that the decoding both succeed, and
provide exactly ISCSI_CHAP_RSP_LEN bytes. CHAP_R contains the digest
calculated by the target, therefore it must be of fixed size. We may
only call IScsiCHAPAuthTarget() if "TargetRsp" has been fully populated.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3356
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Message-Id: <20210608121259.32451-11-lersek@redhat.com>
The IScsiHexToBin() function documents the EFI_BUFFER_TOO_SMALL return
condition, but never actually checks whether the decoded buffer fits into
the caller-provided room (i.e., the input value of "BinLength"), and
EFI_BUFFER_TOO_SMALL is never returned. The decoding of "HexStr" can
overflow "BinBuffer".
This is remotely exploitable, as shown in a subsequent patch, which adds
error checking to the IScsiHexToBin() call sites. This issue allows the
target to compromise the initiator.
Introduce EFI_BAD_BUFFER_SIZE, in addition to the existent
EFI_BUFFER_TOO_SMALL, for reporting a special case of the buffer overflow,
plus actually catch the buffer overflow.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3356
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210608121259.32451-10-lersek@redhat.com>
The IScsiHexToBin() function has the following parser issues:
(1) If the *subject sequence* in "HexStr" is empty, the function returns
EFI_SUCCESS (with "BinLength" set to 0 on output). Such inputs should
be rejected.
(2) The function mis-handles a "HexStr" that ends with a stray nibble. For
example, if "HexStr" is "0xABC", the function decodes it to the bytes
{0xAB, 0x0C}, sets "BinLength" to 2 on output, and returns
EFI_SUCCESS. Such inputs should be rejected.
(3) If an invalid hex char is found in "HexStr", the function treats it as
end-of-hex-string, and returns EFI_SUCCESS. Such inputs should be
rejected.
All of the above cases are remotely triggerable, as shown in a subsequent
patch, which adds error checking to the IScsiHexToBin() call sites. While
the initiator is not immediately compromised, incorrectly parsing CHAP_R
from the target, in case of mutual authentication, is not great.
Extend the interface contract of IScsiHexToBin() with
EFI_INVALID_PARAMETER, for reporting issues (1) through (3), and implement
the new checks.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3356
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210608121259.32451-9-lersek@redhat.com>
Considering IScsiBinToHex():
> if (((*HexLength) - 3) < BinLength * 2) {
> *HexLength = BinLength * 2 + 3;
> }
the following subexpressions are problematic:
(*HexLength) - 3
BinLength * 2
BinLength * 2 + 3
The first one may wrap under zero, the latter two may wrap over
MAX_UINT32.
Rewrite the calculation using SafeIntLib.
While at it, change the type of the "Index" variable from UINTN to UINT32.
The largest "Index"-based value that we calculate is
Index * 2 + 2 (with (Index == BinLength))
Because the patch makes
BinLength * 2 + 3
safe to calculate in UINT32, using UINT32 for
Index * 2 + 2 (with (Index == BinLength))
is safe too. Consistently using UINT32 improves readability.
This patch is best reviewed with "git show -W".
The integer overflows that this patch fixes are theoretical; a subsequent
patch in the series will audit the IScsiBinToHex() call sites, and show
that none of them can fail.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3356
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210608121259.32451-6-lersek@redhat.com>
The "ISCSI_CHAP_AUTH_DATA.OutChallenge" field is declared as a UINT8 array
with ISCSI_CHAP_AUTH_MAX_LEN (1024) elements. However, when the challenge
is generated and formatted, only ISCSI_CHAP_RSP_LEN (16) octets are used
in the array.
Change the array size to ISCSI_CHAP_RSP_LEN, and remove the (now unused)
ISCSI_CHAP_AUTH_MAX_LEN macro.
Remove the "ISCSI_CHAP_AUTH_DATA.OutChallengeLength" field, which is
superfluous too.
Most importantly, explain in a new comment *why* tying the challenge size
to the digest size (ISCSI_CHAP_RSP_LEN) has always made sense. (See also
Linux kernel commit 19f5f88ed779, "scsi: target: iscsi: tie the challenge
length to the hash digest size", 2019-11-06.) For sure, the motivation
that the new comment now explains has always been there, and has always
been the same, for IScsiDxe; it's just that now we spell it out too.
No change in peer-visible behavior.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3356
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Message-Id: <20210608121259.32451-4-lersek@redhat.com>
Commit c6b872c updates GenFw base code attribute to find .text section.
With GCC49 tool chain, aslc file is compiled into elf image.
But, its text section has no CODE attribute. So, it can't be detected
by new GenFw tool.For this type file. its text section is not required.
Its data section will be converted to acpi table.
This fix is to remove assert check when the generated image is ACPI data.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
The "OvmfPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf"
library instance is used in the following platform DSC files in edk2:
OvmfPkg/OvmfPkgIa32.dsc
OvmfPkg/OvmfPkgIa32X64.dsc
OvmfPkg/OvmfPkgX64.dsc
OvmfPkg/OvmfXen.dsc
The Xen customizations are very light-weight in this
PlatformBootManagerLib instance. Isolating them statically, for the sake
of the first three DSC files, would save negligible binary code size, and
would likely worsen code complexity (by way of introducing new internal
interfaces) or blow up source code size (by duplicating almost the entire
lib instance source code). So for now, keep this one bit of Xen dynamism
even on QEMU.
However, because it's only PlatformBootManagerLib now that uses
XenPlatformLib (for the above-stated enlightenment), restrict the
XenPlatformLib class resolution in the first three DSC files to the only
DXE driver that consumes PlatformBootManagerLib (and therefore
XenPlatformLib): BdsDxe. This will cause a build failure later if someone
attempts to call a XenPlatformLib API (that is, tries to re-introduce Xen
enlightenment) in a different module in these non-Xen DSC files.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-44-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Remove the SmbiosTablePublishEntry() function from "SmbiosPlatformDxe.c".
"SmbiosPlatformDxe.c" becomes hypervisor-agnostic.
Add SmbiosTablePublishEntry() back, simplified for QEMU, to the existent
file "Qemu.c". The GetQemuSmbiosTables() function no longer needs to be
declared in "SmbiosPlatformDxe.h"; "SmbiosPlatformDxe.h" becomes
hypervisor-agnostic.
Add SmbiosTablePublishEntry() back, renamed and simplified for Xen, to the
new, arch-independent file "Xen.c". (The existent Xen-specific C files are
arch-dependent.)
Update both INF files; remove the dependencies that are now superfluous in
each.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-43-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
"OvmfPkg/SmbiosPlatformDxe" is structured somewhat differently from the
drivers duplicated and trimmed thus far in this series. The final QEMU and
Xen versions will share a relatively significant amount of code, therefore
duplicating the whole driver is less useful, even temporarily. Instead,
duplicate the INF file, in preparation for customizing the entry point
function.
Because ArmVirtXen doesn't actually include OvmfPkg/SmbiosPlatformDxe [*],
there is only one platform that's supposed to consume the new driver:
OvmfXen. Switch OvmfXen to the new driver at once.
[*] See commit 164cf40383 ("OvmfPkg: SmbiosPlatformDxe: restrict current
Xen code to IA32/X64", 2015-07-26).
This patch is best viewed with "git show --find-copies-harder".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-42-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
According to the function-top comment, SmbiosTablePublishEntry() is
supposed to return an error code if no SMBIOS data is found, from either
GetXenSmbiosTables() or GetQemuSmbiosTables(). Currently the function
returns EFI_SUCCESS in this case however (propagated from
gBS->LocateProtocol()). Make the return code match the documentation.
(This issue is not too important, but it gets in the way of splitting the
entry point function next.)
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-38-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
- Sort all sections in the INF file.
- Remove unused packages (MdeModulePkg) and lib classes (BaseMemoryLib)
from the INF file.
- Restrict some lib classes (BaseLib, HobLib) and GUIDs (gEfiXenInfoGuid)
to IA32 and X64, in the INF file; only the IA32/X64 Xen implementation
requires these.
- Don't make "SmbiosPlatformDxe.h" #include everything just as a
convenience. Spell out directly needed #includes in every file (annotate
each with an example identifier consumed), drop unused #includes.
- Keep #includes sorted.
- Remove the leading underscore from the #include guard macro name in
"SmbiosPlatformDxe.h".
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-37-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLibScan/PciHostBridgeLibScan.inf"
instance is used in the following platforms in edk2:
OvmfPkg/Bhyve/BhyveX64.dsc
OvmfPkg/OvmfXen.dsc
Both platforms define "PcdPciDisableBusEnumeration" with Fixed-at-Build
access method, and TRUE value. Remove the PCD from the
PciHostBridgeLibScan instance, and everything else that is useful only
when the PCD is FALSE.
In practice, this removes the PciHostBridgeUtilityGetRootBridges()
function call, which is based on fw-cfg; see
"OvmfPkg/Library/PciHostBridgeUtilityLib/PciHostBridgeUtilityLib.c".
(Note that the dependency on PciHostBridgeUtilityLib remains in place,
given that the PciHostBridgeLibScan instance continues using lower-level
functions from the library that do not depend on fw-cfg.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-34-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/Library/PciHostBridgeLib/PciHostBridgeLib.inf" instance is
used by the following platforms in edk2:
OvmfPkg/AmdSev/AmdSevX64.dsc
OvmfPkg/OvmfPkgIa32.dsc
OvmfPkg/OvmfPkgIa32X64.dsc
OvmfPkg/OvmfPkgX64.dsc
All these platforms statically inherit PcdPciDisableBusEnumeration=FALSE
from "MdeModulePkg.dec". Remove the the PCD and everything that depends on
it from the PciHostBridgeLib instance. Namely, remove the logic that
determines the root bridge apertures by (a) scanning the entire bus,
device and function number space, and (b) parsing the BAR values that were
pre-set by the Bhyve or Xen machinery.
"XenSupport.c" used to be listed explicitly in "Maintainers.txt", remove
it from that spot too.
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-33-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
At this point, the IncompatiblePciDeviceSupportDxe driver is included in
the following platforms in edk2:
OvmfPkg/AmdSev/AmdSevX64.dsc
OvmfPkg/OvmfPkgIa32.dsc
OvmfPkg/OvmfPkgIa32X64.dsc
OvmfPkg/OvmfPkgX64.dsc
All those platforms inherit FALSE for "PcdPciDisableBusEnumeration" from
"MdeModulePkg.dec".
This makes the PcdGetBool() call in the entry point of the driver
superfluous; remove it. Clean up now unused dependencies in the INF file
as well.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-28-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Because "PcdPciDisableBusEnumeration" is always TRUE in the OvmfXen
platform, we can remove the delayed ACPI table installation from
XenAcpiPlatformDxe. A number of dependencies become useless this way;
remove them too.
(Note that, conversely, in the QemuFwCfgAcpiPlatformDxe driver, we
*cannot* assume that "PcdPciDisableBusEnumeration" is always FALSE,
regardless of Xen: in the ArmVirtQemu platform, the PCD may carry either
FALSE or TRUE, dependent on whether or not the QEMU "virt" machine
configuration includes a PCIe host controller, respectively.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-21-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The "OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf" module is no longer
referenced in any platform DSC file; remove it.
That orphans the "AcpiPlatform.c", "Qemu.c" and "Xen.c" files in the
"OvmfPkg/AcpiPlatformDxe/" directory; remove them.
That in turn removes the only definitions of the InstallAcpiTable(),
QemuDetected(), QemuInstallAcpiTable(), InstallXenTables() functions in
the "OvmfPkg/AcpiPlatformDxe/" directory, so remove their declarations
from "AcpiPlatform.h".
Remove "OvmfPkg/AcpiPlatformDxe/Xen.c" from the "OvmfPkg: Xen-related
modules" section of "Maintainers.txt", as well.
Cc: Andrew Fish <afish@apple.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-13-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
- #include only such public headers in "AcpiPlatform.h" that are required
by the function declarations and type definitions introduced in
"AcpiPlatform.h". Don't use "AcpiPlatform.h" as a convenience #include
file.
- In every file, list every necessary public #include individually, with
an example identifier that's actually consumed.
- Remove unnecessary lib classes, add unlisted lib classes.
- Remove unnecessary #include directives, add unlisted #include
directives.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-11-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Switch the historical OvmfPkg* platforms from the AcpiPlatformDxe driver
to the QemuFwCfgAcpiPlatformDxe driver. (The latter is used by the
ArmVirtQemu* platforms as well.)
The change effectively replaces the following call tree:
InstallAcpiTables [AcpiPlatform.c]
XenDetected [XenPlatformLib] *
InstallXenTables [Xen.c] *
GetXenAcpiRsdp [Xen.c] *
InstallQemuFwCfgTables [QemuFwCfgAcpi.c]
...
InstallOvmfFvTables [AcpiPlatform.c] *
QemuDetected [Qemu.c] *
LocateFvInstanceWithTables [AcpiPlatform.c] *
QemuInstallAcpiTable [Qemu.c] *
QemuInstallAcpiMadtTable [Qemu.c] *
CountBits16 [Qemu.c] *
QemuInstallAcpiSsdtTable [Qemu.c] *
GetSuspendStates [Qemu.c] *
PopulateFwData [Qemu.c] *
with the one below:
InstallAcpiTables [QemuFwCfgAcpiPlatform.c]
InstallQemuFwCfgTables [QemuFwCfgAcpi.c]
...
eliminating the sub-trees highlighted with "*".
There are two consequences:
(1) Xen compatibility is removed from the ACPI platform driver of the
historical OvmfPkg* platforms.
(2) The ACPI tables that are statically built into OVMF (via
"OvmfPkg/AcpiTables/AcpiTables.inf") are never installed. In
particular, OVMF's own runtime preparation of the MADT and SSDT is
eliminated.
Because of (2), remove the "OvmfPkg/AcpiTables/AcpiTables.inf" module as
well -- and then the ACPITABLE build rule too.
Note that (2) only removes effectively dead code; the QEMU ACPI
linker-loader has taken priority since QEMU 1.7.1 (2014). References:
- https://wiki.qemu.org/Planning/1.7
- https://wiki.qemu.org/Features/ACPITableGeneration
- edk2 commit 96bbdbc856 ("OvmfPkg: AcpiPlatformDxe: download ACPI
tables from QEMU", 2014-03-31)
- edk2 commit 387536e472 ("OvmfPkg: AcpiPlatformDxe: implement QEMU's
full ACPI table loader interface", 2014-09-22)
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2122
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210526201446.12554-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1603
LLVM/CLANG8 formal release http://releases.llvm.org/download.html#8.0.0
It can be downloaded and installed in Windows/Linux/Mac OS.
CLANG8ELF tool chain is added to generate ELF image, and convert to PE/COFF.
On Windows OS, set CLANG_HOST_BIN=n, set CLANG8_BIN=LLVM installed directory
For example:
set CLANG_HOST_BIN=n # use windows nmake
set CLANG8_BIN=C:\Program Files\LLVM\bin\
On Linux/Mac, set CLANG8_BIN=LLVM installed directory
This tool chain can be used to compile the firmware code. On windows OS,
Visual Studio is still required to compile BaseTools C tools and nmake.exe.
On Linux/Mac OS, gcc is used to compile BaseTools C tools. make is used
for makefile.
This tool chain is verified on OVMF Ia32, X64 and Ia32X64 to boot Shell.
This tool chain is verified in Windows/Linux and Mac OS.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
LLVM/CLANG doesn't support resource section generation when ELF image generated.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
CLANG8ELF tool chain generated ELF image with the different attributes
in section. Update GenFw to handle them.
1. .text section with writable attribute (support)
2. .reloc section has the symbol for *ABS* (skip)
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
LLVM LLD linker doesn't support common-page-size option. So, max-page-size
is used. To not impact GCC tool chain, new ClangBase.lds is added.
Signed-off-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
This error was found while compiling VirtioMmioDeviceLib for X64
with the GCC5 toolchain, where EFIAPI makes a difference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210602045935.762211-1-kraxel@redhat.com>
[lersek@redhat.com: prepend module name to subject, trim subject back to
allowed length]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
A NameSeg is made 4 chars.
Cf. ACPI 6.4 s20.2.2 "Name Objects Encoding":
NameSeg := <leadnamechar namechar namechar namechar>
Notice that NameSegs shorter than 4 characters are filled
with trailing underscores (‘_’s).
AML_NAME_SEG_SIZE is currently defined in:
- DynamicTablesPkg/Library/Common/AmlLib/AmlDefines.h
- MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiSdt.h
Since the value can be inferred from the ACPI specification
and to avoid multiple definitions, move it to
MdePkg/Include/IndustryStandard/
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3418
According to xhci spec, at USB packet level, a Control Transfer
consists of multiple transactions partitioned into stages: a
setup stage, an optional data stage, and a terminating status
stage. If Data Stage does not exist, the Transfer Type flag(TRT)
should be No Data Stage.
So if data length equals to 0, TRT is set to 0.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
GetWakeupTime should return full time information, including
the daylight/timezone. Make use of the existing non-volatile
variables for that purpose. Moreover add an error checking
of possibly invalid parameters.
This partially fixes FWTS and SCT Set/GetWakeupTime tests on
Marvell platforms.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3397
Current Ppi/MmControl.h file has structure definition of "struct
_PEI_MM_CONTROL_PPI". This name mismatches with its definition in PI
Specification v1.7 (Errata) as "struct _EFI_PEI_MM_CONTROL_PPI".
In addition, field types "PEI_MM_ACTIVATE" and "PEI_MM_DEACTIVATE" used
in "struct _PEI_MM_CONTROL_PPI" mismatches with the definition of
"EFI_PEI_MM_ACTIVATE" and "EFI_PEI_MM_DEACTIVATE" in the PI spec.
This change fixes these mismatches by using the PI spec defined names.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Fixes: 6f33f7a262
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3334
IntelFsp2WrapperPkg defines following PCDs:
PcdCpuMicrocodePatchAddress
PcdCpuMicrocodePatchRegionSize
PcdFlashMicrocodeOffset
But the PCD name caused confusion because UefiCpuPkg defines:
PcdCpuMicrocodePatchAddress
PcdCpuMicrocodePatchRegionSize
PcdCpuMicrocodePatchAddress in IntelFsp2WrapperPkg means the base
address of the FV that holds the microcode.
PcdCpuMicrocodePatchAddress in UefiCpuPkg means the address of the
microcode.
The relationship between the PCDs is:
IntelFsp2WrapperPkg.PcdCpuMicrocodePatchAddress
+ IntelFsp2WrapperPkg.PcdFlashMicrocodeOffset
== UefiCpuPkg.PcdCpuMicrocodePatchAddress
IntelFsp2WrapperPkg.PcdCpuMicrocodePatchRegionSize
- IntelFsp2WrapperPkg.PcdFlashMicrocodeOffset
== UefiCpuPkg.PcdCpuMicrocodePatchRegionSize
To avoid confusion and actually the PCDs in IntelFsp2WrapperPkg
are only used by a sample FSP-T wrapper, this patch removes
the 3 PCDs defined in IntelFsp2WrapperPkg.
The FSP-T wrapper is updated to directly use the ones in UefiCpuPkg.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3324
The SEV-ES stacks currently share a page with the reset code and data.
Separate the SEV-ES stacks from the reset vector code and data to avoid
possible stack overflows from overwriting the code and/or data.
When SEV-ES is enabled, invoke the GetWakeupBuffer() routine a second time
to allocate a new area, below the reset vector and data.
Both the PEI and DXE versions of GetWakeupBuffer() are changed so that
when PcdSevEsIsEnabled is true, they will track the previous reset buffer
allocation in order to ensure that the new buffer allocation is below the
previous allocation. When PcdSevEsIsEnabled is false, the original logic
is followed.
Fixes: 7b7508ad78
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <3cae2ac836884b131725866264e0a0e1897052de.1621024125.git.thomas.lendacky@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Bugzilla: 3415 (https://bugzilla.tianocore.org/show_bug.cgi?id=3415)
The GICv3 architecture supports up to 1020 ordinary interrupt
lines. The actual number of interrupts supported is described by the
ITLinesNumber field in the GICD_TYPER register. The total number of
implemented registers is normally calculated as
32*(ITLinesNumber+1). However, maximum value (0x1f) is a special case
since that would indicate that 1024 interrupts are implemented.
Add handling for this special case in ArmGicGetMaxNumInterrupts.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Commit a18a9bde36 ("MdeModulePkg/Variable/RuntimeDxe: Restore Variable
Lock Protocol behavior", 2020-12-15), for bug 3111, added two such sets of
debug messages that:
(a) are relevant for developers,
(b) yet should not necessarily poke end-users, because no functionality
suffers in practice.
Both message sets are in function VariableLockRequestToLock(): the first
is a generic interface deprecation warning; the second is the
double-locking situation, which we permit for compatibility (return status
EFI_SUCCESS).
Both message sets should be emitted with the DEBUG_WARN mask, not the most
serious DEBUG_ERROR mask. On some platforms, the serial console carries
both terminal traffic, and grave (DEBUG_ERROR-only) log messages. On such
platforms, both message sets may be perceived as a nuisance by end-users,
as there is nothing they can do, and there's nothing they *should* do --
in practice, nothing malfunctions.
(Such a platform is ArmVirtQemu, built with "-D
DEBUG_PRINT_ERROR_LEVEL=0x80000000".)
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3410
Fixes: a18a9bde36
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210521204037.11980-1-lersek@redhat.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Code mistake, VariableIndex is smaller normally than buffer+buffersize
so should not break loop.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
`Status` can be used uninitialized:
/* Evaluates to FALSE */
if (ShellGetExecutionBreakFlag ()) {
Status = EFI_ABORTED;
break;
}
/* Evaluates to FALSE */
if (!Context->ContentDownloaded && !Context->ResponseToken.Event) {
Status = ...;
ASSERT_EFI_ERROR (Status);
} else {
ResponseMessage.Data.Response = NULL;
}
/* UNINITIALIZED USE */
if (EFI_ERROR (Status)) {
break;
}
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sergei Dmitrouk <sergei@posteo.net>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
5-level paging can be enabled on CPU which supports up to 52 physical
address size. But when the feature was enabled, the 48 address size
limit was not removed and the 5-level paging testing didn't access
address >= 2^48. So the issue wasn't detected until recently an
address >= 2^48 is accessed.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
Currenly, when using the Brotli tool to compress data, the output
compressed binary file does not record complete compressed data
when size of input file is too large, which makes the data loss and
will trigger decompress-check issue.
The Brotli document mentioned:
The brotli tool use BrotliEncoderCompressStream method to compresses
input stream to output stream. Under some circumstances (e.g. lack of
output stream capacity) the BrotliEncoderOperation would require
several calls to BrotliEncoderCompressStream. The method must be
called again until both input stream is depleted and encoder has no
more output after the method is called.
This patch fixes this issue based on the Brotli document.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add support for the ImageCapsuleSupport field, introduced in version 3
of the EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER structure. This
structure member is used to indicate if the corresponding payload has
support for authentication and dependency.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
AARCH64 support has been added to BaseRngLib via the optional
ARMv8.5 FEAT_RNG.
Refactor RngDxe to support AARCH64, note support for it in the
VALID_ARCHITECTURES line of RngDxe.inf and enable it in SecurityPkg.dsc.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Make BaseRngLib more generic by moving x86-specific functionality into
'Rand' and adding files under 'AArch64' to support the optional ARMv8.5
RNG instruction RNDR that is a part of FEAT_RNG.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The SCP-firmware has moved to full support for SCMIv2 which means that
the base protocol can be either compliant with SCMI v1 or v2.
Allow any version between SCMI v1.0 and SCMI v2.0 to be compatible
with the current implementation.
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3359
* Save/Restore global state in GetToolChainAndFamilyFromDsc()
This resolves an issue where the multi-arch build for
UefiPayloadPkg would skip the autogen and build of IA32
components.
* Expand tools wildcard.
This resolves the issue where autogen makefile contents
would have a BUIDLRULEFAMILY tools definitions with an
'*' in the tool field that breaks the build from invalid
makefile syntax.
* Build rule family higher priority than Family.
This resolves the issue where flags were appended from
both the BUILDRULEFAMILY and FAMILY when only
BUILDRULEFAMILY should be appended when present.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Andrew Fish <afish@apple.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3345
During PEI, the MMIO range for the TPM is marked as encrypted when running
as an SEV guest. While this isn't an issue for an SEV guest because of
the way the nested page fault is handled, it does result in an SEV-ES
guest terminating because of a mitigation check in the #VC handler to
prevent MMIO to an encrypted address. For an SEV-ES guest, this range
must be marked as unencrypted.
Create a new x86 PEIM for TPM support that will map the TPM MMIO range as
unencrypted when SEV-ES is active. The gOvmfTpmMmioAccessiblePpiGuid PPI
will be unconditionally installed before exiting. The PEIM will exit with
the EFI_ABORTED status so that the PEIM does not stay resident. This new
PEIM will depend on the installation of the permanent PEI RAM, by
PlatformPei, so that in case page table splitting is required during the
clearing of the encryption bit, the new page table(s) will be allocated
from permanent PEI RAM.
Update all OVMF Ia32 and X64 build packages to include this new PEIM.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <42794cec1f9d5bc24cbfb9dcdbe5e281ef259ef5.1619716333.git.thomas.lendacky@amd.com>
[lersek@redhat.com: refresh subject line]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3359
Update BaseTools to support new build targets, new tool chains,
and new architectures declared in DSC file [BuildOptions] sections.
* Do not expand * when tools_def.txt is parsed. Only expand when
both tools_def.txt and DSC [BuilsOptions] sections have been parsed.
This also requires more flexible matching of tool keys that contain *
in tool key fields.
* Pre-scan the platform DSC file for FAMILY and TOOLCHAIN declarations
DSC in [BuildOptions] sections before the FAMILY and TOOLCHAIN need
to be known.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
'Manufacturer' was spelled wrongly in a comment in
MiscChassisManufacturerData.c.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The calculation of the chassis SKU number field was being calculated
incorrectly, forgetting that there's one element already present in
the structure.
Fix the calculation and improve code readability by introducing a
SkuNumberField variable.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Add a new function to OemMiscLib to allow platforms to report their boot
status into the Type32 SMBIOS table.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Add OemMiscLib calls to allow platforms to provide the following
information about the chassis:
o Bootup state
o Power supply/supplies state
o Thermal state
o Security state
o Chassis height (in RMU)
o Number of power cords
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3293
Add constraints on the key strength of enrolled platform key(PK), which
must be greater than or equal to 2048 bit. PK key strength is required
by Intel SDL and MSFT, etc. This limitation prevents user from using
weak keys as PK.
The original code to check the certificate file type is placed in a new
function CheckX509Certificate(), which checks if the X.509 certificate
meets the requirements of encode type, RSA-Key strengh, etc.
Cc: Min Xu <min.m.xu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Jiaqi Gao <jiaqi.gao@intel.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3300
Current implementation of SetStaticPageTable routine in PiSmmCpuDxeSmm
driver will check a global variable mPhysicalAddressBits, and eventually
cap any value larger than 39 at 39.
This global variable is used in ConvertMemoryPageAttributes, which backs
SmmSetMemoryAttributes and SmmClearMemoryAttributes. Thus for a processor
that supports more than 39 bits width, trying to mark page table regions
higher than 39-bit will always return EFI_UNSUPPROTED.
This change updated the interface of SetStaticPageTable function to take
PhysicalAddressBits as an input parameter, in order to avoid changing/
accessing the global variable.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Fixes: 4eee0cc7cc
Signed-off-by: Kun Qin <kuqin12@gmail.com>
The DBG2 table generator set the access size for the UART to
DWORD (4 bytes) by default. However, according to Section B
Generic UART, Arm Base System Architecture 1.0, Platform
Design Document, a Generic UART can have BYTE, WORD or DWORD
access sizes. To address this an AccessSize field has been
introduced in CM_ARM_SERIAL_PORT_INFO object.
This patch updates the DBG2 generator to setup the AccessSize
field in the Generic Address Structure (GAS) for the UART in
the DBG2 table with information provided by the platform.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The SPCR table generator set the access size for the UART to
DWORD (4 bytes) by default. However, according to Section B
Generic UART, Arm Base System Architecture 1.0, Platform
Design Document, a Generic UART can have BYTE, WORD or DWORD
access sizes. To address this an AccessSize field has been
introduced in CM_ARM_SERIAL_PORT_INFO object.
This patch updates the SPCR generator to setup the AccessSize
field in the Generic Address Structure (GAS) for the UART in
the SPCR table with information provided by the platform.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add access size to CM_ARM_SERIAL_PORT_INFO so that this can be
passed down to the Generic Address Structure.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
8005:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
8007:
There should be no use of short (single character) variable names
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Complex types should be typedef-ed
The error is due to the a nested structure declaration.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Complex types should be typedef-ed
The error is due to the a nested structure declaration.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
All include file contents should be guarded by
a #ifndef statement.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
All include file contents should be guarded by
a #ifndef statement.
This patch replaces a "#if !defined [...]" statement
by a "#ifndef [...]" statement, preventing Ecc to
throw an error.
Edk2 coding standard stating that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used."
the include guard is also updated.
Ref:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
5_source_files/53_include_files#
5-3-5-all-include-file-contents-must-be-protected-by-a-include-guard
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Function name should be left justified,
followed by the beginning of the parameter list,
with the closing parenthesis on its own line,
indented two spaces
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Commit: 142fa386eb
removes the ArmGicSecLib. The file ArmGic/ArmGicSecLib.c
was exclusively used by this library. Thus, this file should
also be removed.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source files
[ArmPkg/Library/SemihostLib/SemihostPrivate.h]
is existing in module
ArmPkg/Library/SemihostLib/SemihostLib.inf
but is not described in the INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source files
[ArmPkg/Drivers/MmCommunicationDxe/MmCommunicate.h]
is existing in module
ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
but is not described in the INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source files
[ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdog.h]
is existing in module
ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf
but is not described in the INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source files
[ArmPkg/Drivers/ArmScmiDxe/ArmScmiPerformanceProtocolPrivate.h]
[ArmPkg/Drivers/ArmScmiDxe/ScmiPrivate.h]
[ArmPkg/Drivers/ArmScmiDxe/ScmiDxe.h]
[ArmPkg/Drivers/ArmScmiDxe/ArmScmiBaseProtocolPrivate.h]
[ArmPkg/Drivers/ArmScmiDxe/ArmScmiClockProtocolPrivate.h]
are existing in module
ArmPkg/Drivers/ArmScmiDxe/ArmScmiDxe.inf
but are not described in INF the file.
The patch also re-orders the files in the
[Sources.common] section.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Module file has FILE_GUID collision with other
module file
The two .inf files with clashing GUID are:
ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
ArmPkg/Library/StandaloneMmMmuLib/ArmMmuStandaloneMmLib.inf
As ArmMmuBaseLib.inf is older than ArmMmuStandaloneMmLib.inf,
it has precedence.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
There should be no unnecessary inclusion of library
classes in the INF file
This comes with the additional information:
The Library Class [BootLogoLib]
is not used in any platform
The Library Class [DxeServicesLib]
is not used in any platform
The Library Class [UefiBootManagerLib]
is not used in any platform
The Library Class [PeCoffExtraActionLib]
is not used in any platform
ArmPkg/ArmPkg.dsc builds the modules requiring thses libraries,
but doesn't build the required libraries. This patch adds
the missing libraries to the [LibraryClasses.common] section.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only Doxygen commands '@bug', '@todo', '@example', '@file',
'@attention', '@param', '@post', '@pre', '@retval', '@return',
'@sa', '@since', '@test', '@note', '@par', '@endcode', '@code',
'@{', '@}' are allowed to mark the code
This patch removes the ":" character following the "@param"
doxygen command.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used for #define
declarations
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used
for #define declarations
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used
for #define declarations
Edk2 coding standard stating that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used."
the include guard of ArmCortexA5x.h is also updated.
Ref:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
5_source_files/53_include_files#
5-3-5-all-include-file-contents-must-be-protected-by-a-include-guard
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The DependencyCheck available in .pytool detects an unnecessary
dependency of the NorFlashStandaloneMm.inf module over the
EmbeddedPkg package.
This patch removes this dependency.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This patch fixes the following Ecc reported error:
INF/DEC/DSC/FDF file header comment should begin
with "## @file" or "# @file" at the very top file
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch fixes the following Ecc reported error:
File header doesn't exist File header comment missing
the ""Copyright""
Even though a copyright is present in the header file,
the leading '*' char prevents the Ecc tool from detecting it.
According to the edk2 coding specifcation, section 5.2.3
"File Heading", there should not be leading '*' char.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3308
The EDK II Build Specifications do not restrict the set of
CPU architectures that can be supported. Remove places in
the EDK II that assumes a fixed set of CPU architectures.
Update EFI_REMOVABLE_MEDIA_FILE_NAME to allow it to be
predefined in tools_def.txt or a DSC file [BuildOptions]
section using a *_*_*_CC_FLAGS statement.
Add support for the following two defines. If neither are
defines, then preserve the current behavior. If either is
defined, then compare these 16-bit values to Machine in the
EFI_IMAGE_MACHINE_TYPE_SUPPORTED(Machine) and
EFI_IMAGE_MACHINE_CROSS_TYPE_SUPPORTED(Machine) macros.
* EFI_IMAGE_MACHINE_TYPE_VALUE
* EFI_IMAGE_MACHINE_CROSS_TYPE_VALUE
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Abner Chang <abner.chang@hpe.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In v2, BZ reference is added.
BZ#:3030
Fix the typo [in]/[out] of parameter DestroyStructure in
function header.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3312
Update parsing of MAKE_FLAGS in DSC [BuildOptions] sections
to split the flags into a list to be compatible with
running the make command using Popen(). Parsing MAKE_FLAGS
from tools_def.txt already uses _SplitOption(). This change
uses the same _SplitOption() method for MAKE_FLAGS from a
DSC [BuildOptions] section.
Also update the parsing of MAKE_PATH to support MAKE_PATH
from tools_def.txt or the DSC [BuildOptions] section. MAKE_PATH
in DSC [BuildOptions] section is higher priority than MAKE_PATH
in tools_def.txt.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3325
1. AsmReadMsr64() in X64/GccInlinePriv.c
AsmReadMsr64 can return uninitialized value if FilterBeforeMsrRead
returns False. This causes build error with the CLANG toolchain.
2. AsmWriteMsr64() in X64/GccInlinePriv.c
In the case that FilterBeforeMsrWrite changes Value and returns True,
The original Value, not the changed Value, is written to the MSR.
This behavior is different from the one of AsmWriteMsr64() in
X64/WriteMsr64.c for the MSFT toolchain.
Signed-off-by: Takuto Naito <naitaku@gmail.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The EArmObjExtendedInterruptInfo doesn't exist. Remove any reference
to this enum.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The structure is not correctly placed in the file. Move it
so it follows the EARM_OBJECT_ID enum order.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Update gEfiMdePkgTokenSpaceGuid.PcdFSBClock so it can have the correct
value when SecPeiDxeTimerLibCpu start to use it for the APIC timer.
Currently, nothing appear to use the value in PcdFSBClock before
XenPlatformPei had a chance to set it even though TimerLib is included
in modules run before XenPlatformPei.
XenPlatformPei doesn't use any of the functions that would use that
value. No other modules in the PEI phase seems to use the TimerLib
before PcdFSBClock is set. There are currently two other modules in
the PEI phase that needs the TimerLib:
- S3Resume2Pei, but only because LocalApicLib needs it, but nothing is
using the value from PcdFSBClock.
- CpuMpPei, but I believe it only runs after XenPlatformPei
Before the PEI phase, there's the SEC phase, and SecMain needs
TimerLib because of LocalApicLib. And it initialise the APIC timers
for the debug agent. But I don't think any of the DebugLib that
OvmfXen could use are actually using the *Delay functions in TimerLib,
and so would not use the value from PcdFSBClock which would be
uninitialised.
A simple runtime test showed that TimerLib doesn't use PcdFSBClock
value before it is set.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2490
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210412133003.146438-8-anthony.perard@citrix.com>
[lersek@redhat.com: cast Freq to UINT32 for PcdSet32S(), not for ASSERT()]
Calculate the frequency of the APIC timer that Xen provides.
Even though the frequency is currently hard-coded, it isn't part of
the public ABI that Xen provides and thus may change at any time. OVMF
needs to determine the frequency by an other mean.
Fortunately, Xen provides a way to determines the frequency of the
TSC, so we can use TSC to calibrate the frequency of the APIC timer.
That information is found in the shared_info page which we map and
unmap once done (XenBusDxe is going to map the page somewhere else).
The shared_info page is mapped at the highest physical address allowed
as it doesn't need to be in the RAM, thus there's a call to update the
page table.
The calculated frequency is only logged in this patch, it will be used
in a following patch.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2490
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210412133003.146438-7-anthony.perard@citrix.com>
Some information available in a Xen guest can be mapped anywhere in
the physical address space and they don't need to be backed by RAM.
For example, the shared info page.
While it's easier to put those pages anywhere, it is better to avoid
mapping it where the RAM is. It might split a nice 1G guest page table
into 4k pages and thus reducing performance of the guest when it
accesses its memory. Also mapping a page like the shared info page and
then unmapping it or mapping it somewhere else would leave a hole in
the RAM that the guest would propably not be able to use anymore.
So the patch introduces a new function which can be used to 1:1
mapping of guest physical memory above 4G during the PEI phase so we
can map the Xen shared pages outside of memory that can be used by
guest, and as high as possible.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210412133003.146438-6-anthony.perard@citrix.com>
According to ACPI 6.4, 6.1.5 _HID states:
- A valid PNP ID must be of the form "AAA####" where A is an uppercase
letter and # is a hex digit.
- A valid ACPI ID must be of the form "NNNN####" where N is an uppercase
letter or a digit ('0'-'9') and # is a hex digit.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
BZ:2919
The driver is used to manage EDK2 Redfish Configuration Handler
Protocol installed by EDK2 Redfish feature drivers.
This is the EDK2 Redfish client driver written based on the EDK2
Redfish foundation to initialize EDK2 Redfish feature drivers.
EDK2 Redfish feature drivers are used to provision/consume/update
the firmware owns Redfish properties during system power on
initialization.
RedfishConfigHandlerCommon.c has the common code for the driver
instances used in different EDK2 boot phases or used by different
driver models in the future contribution.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
The SystemEnclosureTypeTable in QueryTable.c contained a couple
of errors: value 0x10 is "Lunch Box" not "Main Server Chassis", and
the Sub Notebook value was repeated as 0x13 when that entry is for
"SubChassis". The entries in-between needed adjusted.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2832
1. Remove PEI instance(PeiCpuTimerLib).
PeiCpuTimerLib is currently designed to save time by getting CPU TSC
frequency from Hob. BaseCpuTimerLib is designed to calculate TSC frequency
by using CPUID[15h] each time.
The time it takes to find CpuCrystalFrequencyHob (about 2000ns) is much
longer than it takes to calculate TSC frequency with CPUID[15h] (about
450ns), which means using BaseCpuTimerLib to trigger a delay is more
accurate than using PeiCpuTimerLib, recommend to use BaseCpuTimerLib
instead of PeiCpuTimerLib.
2. Remove DXE instance(DxeCpuTimerLib).
DxeCpuTimerLib is designed to calculate TSC frequency with CPUID[15h] in
its constructor function, then save it in a global variable. For this
design, once the driver containing this instance is running, this
constructor function is called, it will take extra time to calculate TSC
frequency.
The time it takes to get TSC frequency from global variable is shorter
than it takes to calculate TSC frequency with CPUID[15h], but 450ns is a
short time, the impact on the platform is very limited.
In addition, in order to simplify the code, recommend to use
BaseCpuTimerLib instead of DxeCpuTimerLib.
I did some experiments on one server platform and collected following data:
1. Average time required to find CpuCrystalFrequencyHob: about 2000 ns.
2. Average time required to find the last Hob: about 2700 ns.
2. Average time required to calculate TSC frequency: about 450 ns.
Reference code:
//
// Calculate average time required to find Hob.
//
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] GetPerformanceCounterFrequency - GetFirstGuidHob (1000 cycles)\n"));
Ticks1 = AsmReadTsc();
for (i = 0; i < 1000; i++) {
GuidHob = GetFirstGuidHob (&mCpuCrystalFrequencyHobGuid);
}
Ticks2 = AsmReadTsc();
if (GuidHob == NULL) {
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] - CpuCrystalFrequencyHob can not be found!\n"));
} else {
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] - Average time required to find Hob = %d ns\n", \
DivU64x32(DivU64x64Remainder(MultU64x32((Ticks2 - Ticks1), 1000000000), *CpuCrystalCounterFrequency, NULL), 1000)));
}
//
// Calculate average time required to calculate CPU frequency.
//
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] GetPerformanceCounterFrequency - CpuidCoreClockCalculateTscFrequency (1000 cycles)\n"));
Ticks1 = AsmReadTsc();
for (i = 0; i < 1000; i++) {
Freq = CpuidCoreClockCalculateTscFrequency ();
}
Ticks2 = AsmReadTsc();
DEBUG((DEBUG_ERROR, "[PeiCpuTimerLib] - Average time required to calculate TSC frequency = %d ns\n", \
DivU64x32(DivU64x64Remainder(MultU64x32((Ticks2 - Ticks1), 1000000000), *CpuCrystalCounterFrequency, NULL), 1000)));
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
CpuPause() might allow the CPU to go into a lower power state
state while we spin.
On X86, CpuPause() executes a PAUSE instruction which the Intel
and AMD specs describe as follows:
Intel:
"PAUSE: An additional function of the PAUSE instruction is to reduce
the power consumed by a processor while executing a spin loop. A
processor can execute a spin-wait loop extremely quickly, causing the
processor to consume a lot of power while it waits for the resource it
is spinning on to become available. Inserting a pause instruction in a
spin-wait loop greatly reduces the processor?s power consumption."
AMD:
"PAUSE: Improves the performance of spin loops, by providing a hint to
the processor that the current code is in a spin loop. The processor
may use this to optimize power consumption while in the spin loop.
Architecturally, this instruction behaves like a NOP instruction."
On RISC-V and ARM64, CpuPause() executes a NOP, which is no worse than
the tight loop we have.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The comments in PiSmmCommunicationPei.c describe the whole memory
layout of the SMRAM regarding the SMM communication.
But SHA-1: 8b1d149390
PiSmmCommunicationSmm: Deprecate SMM Communication ACPI Table
removed the code that produces the ACPI Table.
This change updates the accordingly comments.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Update openssl from 1.1.1g to 1.1.1j. Current OpenSSL version
1.1.1g contains the vulnerabilities of CVE-2021-23841 and
CVE-2021-23840. The related vulnerable API EVP_DecryptUpdate
are used in drivers.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3266
Besides, the opensslconf.h automatically generated by process_files.pl.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Liu Wei <weix.c.liu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The CommandLine and InitrdData may be set to NULL if the provided
size is too large. Because the zero page is mapped, this would not
cause an immediate crash but can lead to memory corruption instead.
This patch just adds validation and returns error if either allocation
has failed.
Signed-off-by: Martin Radev <martin.b.radev@gmail.com>
Message-Id: <YFPJsaGzVWQxoEU4@martin-ThinkPad-T440p>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
[lersek@redhat.com: drop unnecessary empty line from code; remove personal
(hence likely unstable) repo reference from commit message]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3233
GDT needs to be allocated below 4GB in 64bit environment
because AP needs it for entering to protected mode.
CPU running in big real mode cannot access above 4GB GDT.
But CpuDxe driver contains below code:
gdt = AllocateRuntimePool (sizeof (GdtTemplate) + 8);
.....
gdtPtr.Base = (UINT32)(UINTN)(VOID*) gdt;
The AllocateRuntimePool() may allocate memory above 4GB.
Thus, we cannot use AllocateRuntimePool (), instead,
we should use AllocatePages() to make sure GDT is below 4GB space.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
MpInitLib contains a function MicrocodeDetect() which is called by
all threads as an AP procedure.
Today this function contains below code:
if (CurrentRevision != LatestRevision) {
AcquireSpinLock(&CpuMpData->MpLock);
DEBUG ((
EFI_D_ERROR,
"Updated microcode signature [0x%08x] does not match \
loaded microcode signature [0x%08x]\n",
CurrentRevision, LatestRevision
));
ReleaseSpinLock(&CpuMpData->MpLock);
}
When the if-check is passed, the code may call into PEI services:
1. AcquireSpinLock
When the PcdSpinTimeout is not 0, TimerLib
GetPerformanceCounterProperties() is called. And some of the
TimerLib implementations would get the information cached in
HOB. But AP procedure cannot call PEI services to retrieve the
HOB list.
2. DEBUG
Certain DebugLib relies on ReportStatusCode services and the
ReportStatusCode PPI is retrieved through the PEI services.
DebugLibSerialPort should be used.
But when SerialPortLib is implemented to depend on PEI services,
even using DebugLibSerialPort can still cause AP calls PEI
services resulting hang.
It causes a lot of debugging effort on the platform side.
There are 2 options to fix the problem:
1. make sure platform DSC chooses the proper DebugLib and set the
PcdSpinTimeout to 0. So that AcquireSpinLock and DEBUG don't call
PEI services.
2. remove the AcquireSpinLock and DEBUG call from the procedure.
Option #2 is preferred because it's not practical to ask every
platform DSC to be written properly.
Following option #2, there are two sub-options:
2.A. Just remove the if-check.
2.B. Capture the CurrentRevision and ExpectedRevision in the memory
for each AP and print them together from BSP.
The patch follows option 2.B.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Add logic in EjectCpu() to do the actual the CPU ejection.
On the BSP, ejection happens by first selecting the CPU via
its QemuSelector and then sending the QEMU "eject" command.
QEMU in-turn signals the remote VCPU thread which context-switches
the CPU out of the SMI handler.
Meanwhile the CPU being ejected, waits around in its holding
area until it is context-switched out. Note that it is possible
that a slow CPU gets ejected before it reaches the wait loop.
However, this would never happen before it has executed the
"AllCpusInSync" loop in SmiRendezvous().
It can mean that an ejected CPU does not execute code after
that point but given that the CPU state will be destroyed by
QEMU, the missed cleanup is no great loss.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Aaron Young <aaron.young@oracle.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3132
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Message-Id: <20210312062656.2477515-10-ankur.a.arora@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: unneeded inner QemuSelector declaration in EjectCpu()
triggers VS warning #4456 (local variable shadowed); remove it]
EDK2 port of DMTF libredfish project. We clone the necessary files
from open source project libredfish (https://github.com/DMTF/
libredfish) tag v1.0.0 and revise it to incorporate with edk2
firmware code base.
The reason of cloning the necessary files instead of using extern
submodule of libredfish project:
libredfish as a C library which is executed under Windows and
Linux. It could be binded with other programming languages such as
java and python. The library uses curl library as the communication service with Redfish, which is not easy to be abstracted and
replaced with EFI specific protocols (e.g. EFI_REST_EX_PROTOCOL or
payload encode/decode library) and EFI data types. We had the
conversation with DMTF community and they think edk2 is a firmware
solution but not the programming language,
therefore they rejected to have edk2 as a binding to libredfish.
According to above, we decide to clone the necessary files from
libredfish modify it to incorporate with edk2.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Ting Ye <ting.ye@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3199
When Token points to mSmmStartupThisApToken, this routine is called
from SmmStartupThisAp() in non-blocking mode due to
PcdCpuSmmBlockStartupThisAp == FALSE.
In this case, caller wants to startup AP procedure in non-blocking
mode and cannot get the completion status from the Token because there
is no way to return the Token to caller from SmmStartupThisAp().
Caller needs to use its specific way to query the completion status.
There is no need to allocate a token for such case so the 3 overheads
can be avoided:
1. Call AllocateTokenBuffer() when there is no free token.
2. Get a free token from the token buffer.
3. Call ReleaseToken() in APHandler().
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3218
Adds an INF for StandaloneMmCpuFeaturesLib, which supports building
the SmmCpuFeaturesLib code for Standalone MM. Minimal code changes
are made to allow reuse of existing code for Standalone MM.
The original INF file names are left intact (continue to use SMM
terminology) to retain backward compatibility with platforms that
use those INFs. Similarly, the pre-existing C file names are
unchanged to be consistent with the INF file names.
Note that all references in library source files to PiSmm.h have
been changed to PiMm.h for consistency.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Message-Id: <20210217213227.1277-6-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
There's currently two library instances:
1. SmmCpuFeaturesLib
2. SmmCpuFeaturesLibStm
There's two constructor functions:
1. SmmCpuFeaturesLibConstructor()
2. SmmCpuFeaturesLibStmConstructor()
SmmCpuFeaturesLibConstructor() is called by
SmmCpuFeaturesLibStmConstructor() since the functionality in that
function is required by both library instances.
The declaration for SmmCpuFeaturesLibConstructor() is embedded in
"SmmStm.c" instead of being declared in a header file. Further,
that constructor function is called by the STM specific constructor.
This change moves the common code to a function called
CpuFeaturesLibInitialization() which is declared in an internal
library header file "CpuFeaturesLib.h". Each constructor simply
calls this function to perform the common functionality.
Additionally, SmmCpuFeaturesLibConstructor() is moved from
SmmCpuFeaturesLibNoStm.c into a instance-specific file allowing
SmmCpuFeaturesLibNoStm.c to contain no STM implementation agnostic
to a particular library instance.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210217213227.1277-4-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
FinishSmmCpuFeaturesInitializeProcessor() is a multi-instance
internal library function that is currently not declared in a
header file but embedded in "SmmCpuFeaturesLib.c".
This change cleans up the declaration moving it to a new header
file "CpuFeaturesLib.h" and removing the local declaration in
"SmmCpuFeaturesLib.c".
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210217213227.1277-2-mikuback@linux.microsoft.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
[lersek@redhat.com: replace the guard macro "_CPU_FEATURES_LIB_H_" with
"CPU_FEATURES_LIB_H_", for fixing ECC 8003, per commit 6ffbb3581a]
The message "LibGetTime: RtcEpochSeconds non volatile variable was not
found - Using compilation time epoch." can be printed a very large
number of times, causing log files to become excessively large. This is
because the RtcEpochSeconds variable only gets set if LibSetTime is
called, for example by running 'time 12:00' in the UEFI Shell.
Avoid this by setting RtcEpochSeconds to BUILD_EPOCH (EpochSeconds)
after printing the message. It's set to a volatile variable so the
message will be displayed on future boots and not hidden.
Commit 44ae214591 reduced the verbosity of
the message to DEBUG_VERBOSE. Revert it back to DEBUG_INFO so it's more
prominent now that it doesn't get printed so frequently.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Currently StructurePcd.dsc have the list order issue. For a Pcd
with several elements, the list indexs are used to distinguish
these elements like this:
PcdName.name.offset_name[0]|0x0
PcdName.name.offset_name[10]|0x0
PcdName.name.offset_name[11]|0x0
...
PcdName.name.offset_name[2]|0x0
...
However, the index is not strictly sorted by decimal numerical order,
which is not user friendly. One more sort rule for index is added to
the current rules to support for decimal numerical order in this patch.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3168
This interface provides an abstration layer to allow MM modules to access
requested areas that are outside of MMRAM. On MM model that blocks all
non-MMRAM accesses, areas requested through this API will be mapped or
unblocked for accessibility inside MM environment.
For MM modules that need to access regions outside of MMRAMs, the agents
that set up these regions are responsible for invoking this API in order
for these memory areas to be accessible from inside MM.
Example usages:
1. To enable runtime cache feature for variable service, Variable MM
module will need to access the allocated runtime buffer. Thus the agent
sets up these buffers, VariableSmmRuntimeDxe, will need to invoke this
API to make these regions accessible by Variable MM.
2. For TPM ACPI table to communicate to physical presence handler, the
corresponding NVS region has to be accessible from inside MM. Once the
NVS region are assigned, it needs to be unblocked thourgh this API.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Message-Id: <MWHPR06MB31028AF0D0785B93E4E7CF63F3969@MWHPR06MB3102.namprd06.prod.outlook.com>
In function InitGdt(), SmiPFHandler() and Gen4GPageTable(), it uses
CpuIndex * mSmmStackSize to get the SMM stack address offset for
multi processor. It misses the SMM Shadow Stack Size. Each processor
will use mSmmStackSize + mSmmShadowStackSize in the memory.
It should use CpuIndex * (mSmmStackSize + mSmmShadowStackSize) to get
this SMM stack address offset. If mSmmShadowStackSize > 0 and multi
processor enabled, it will get the wrong offset value.
CET shadow stack feature will set the value of mSmmShadowStackSize.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3237
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roger Feng <roger.feng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
If CET shadows stack feature enabled in SMM and stack switch is enabled.
When code execute from SMM handler to SMM exception, CPU will check SMM
exception shadow stack token busy bit if it is cleared or not.
If it is set, it will trigger #DF exception.
If it is not set, CPU will set the busy bit when enter SMM exception.
So, the busy bit should be cleared when return back form SMM exception to
SMM handler. Otherwise, keeping busy bit 1 will cause to trigger #DF
exception when enter SMM exception next time.
So, we use instruction SAVEPREVSSP, CLRSSBSY and RSTORSSP to clear the
shadow stack token busy bit before RETF instruction in SMM exception.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3192
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Roger Feng <roger.feng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Modify two macros to put "offset" in parentheses and remove
parentheses from "4 * offset".
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The following patches added support for StandaloneMM using FF-A:
9da5ee116a ArmPkg: Allow FF-A calls to set memory region's attributes
0e43e02b9b ArmPkg: Allow FF-A calls to get memory region's attributes
However, in the error handling logic for the Get/Set Memory attributes,
the CLANG compiler reports that a status variable could be used without
initialisation. This issue is a false positive and is not seen with GCC.
The Get/Set Memory attributes operation is atomic and therefore an
FFA_INTERRUPT or FFA_SUCCESS response is not expected in response
to FFA_MSG_SEND_DIRECT_REQ. So the remaining cases that could occur
are:
- the target sends FFA_MSG_SEND_DIRECT_RESP with a success or
failure code.
or
- FFA_MSG_SEND_DIRECT_REQ transmission failure.
Therefore,
- reorder the error handling conditions such that it prevents the
uninitialised variable issue being flagged by CLANG.
- move the repetitive code to a static helper function and add
documentation at the appropriate places.
- fix error handling in functions that invoke GetMemoryPermissions().
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3235
The library for this header initially resided in StandaloneMmPkg
but moved to MdePkg and now this file is a duplicate of the header
file in MdePkg.
This change removes the header file from StandaloneMmPkg. More
details regarding the history of the library transitioning from
StandaloneMmPkg to MdePkg are below.
The following commit removed the library from StandaloneMmPkg:
d6253d2f9a ("StandaloneMmPkg: remove redundant
StandaloneMmDriverEntryPoint driver", 2019-03-11)
The following commits added the library class & instance to MdePkg:
7df4764e6a ("MdePkg: introduce standalone MM entry point
library class", 2019-01-14)
5866d49923 ("MdePkg: introduce standalone MM entry point
library implementation", 2019-01-14)
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
When AP firstly wakes up, MpFuncs.nasm contains below logic to assign
an unique ApIndex to each AP according to who comes first:
---ASM---
TestLock:
xchg [edi], eax
cmp eax, NotVacantFlag
jz TestLock
mov ecx, esi
add ecx, ApIndexLocation
inc dword [ecx]
mov ebx, [ecx]
Releaselock:
mov eax, VacantFlag
xchg [edi], eax
---ASM END---
"lock inc" cannot be used to increase ApIndex because not only the
global ApIndex should be increased, but also the result should be
stored to a local general purpose register EBX.
This patch learns from the NASM implementation of
InternalSyncIncrement() to use "XADD" instruction which can increase
the global ApIndex and store the original ApIndex to EBX in one
instruction.
With this patch, OVMF when running in a 255 threads QEMU spends about
one second to wakeup all APs. Original implementation needs more than
10 seconds.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The EDK II C Coding Standards Specification states that:
"Names starting with one or two underscores, such as
_MACRO_GUARD_FILE_NAME_H_, must not be used. They are
reserved for compiler implementation." [1]
The Ecc tool currently checks that the include guard end with
a trailing underscore. Thus, the check and the error message
should both be modified.
The new check forces having one sole trailing underscore
character, as the example in the specification shows:
"FILE_NAME_H_" [1]
This would allow to have more consistency.
[1] Section 5.3.5 "All include file contents must be protected
by a #include guard":
https://edk2-docs.gitbook.io/
edk-ii-c-coding-standards-specification/5_source_files/53_include_files
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3135
When Boot Menu does not exist in the BootOrder, BmRegisterBootManagerMenu
will create one into list. However, it should be put at the "end" of
BootOrder instead of "start" of BootOrder. Replace 0 by -1 to adjust
order of load options.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
BZ#:3174
Platform library to provide the encoding/decoding algorithms for
the Redfish packets.
The supported value could be one of below or any which is
platform-specific.
- HTTP_CONTENT_ENCODING_IDENTITY "identity"
- HTTP_CONTENT_ENCODING_GZIP "gzip"
- HTTP_CONTENT_ENCODING_COMPRESS "compress"
- HTTP_CONTENT_ENCODING_DEFLATE "deflate"
- HTTP_CONTENT_ENCODING_BROTLI "br"
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
BZ:2911
This is the header file of EDKII Redfish config handler protocol,
which is used by EDKII Redfish feature driver in order to
manipulate Redfish properties based on the Redfish schema.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Ignore the build error of assignment within conditional expression.
Add build option to ignore the build error of "assignment within
conditional expression".
This build error is caused by the macros defined in open source
project jansson header file jansson.h.
- json_object_foreach
- json_object_foreach_safe
- json_array_foreach
We use build option to avoid the build errors on Visual Studio
(GCC doesn't havvve this problem) for now. Already sent an email
to jansson open source community to revise these macro as Leif's
suggestion as below,
for (key = json_object_iter_key(json_object_iter(object)); \
key; \
key = json_object_iter_key( \
json_object_iter_next(object,
json_object_key_to_iter(key)))) { \
value =
json_object_iter_value(json_object_key_to_iter(key)); \
if (!value) \
break; \
} \
We will remove this build option once the patch is accepted and
upstreamed.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Add more functions which were missed in the first time commit,
that causes the build error with EDK2 Redfish feature driver.
strerror - We don't support this on edk2 environment.
strpbrk - Cloned this function from edk2-LibC
File operation functions - Not supported on edk2 environment.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Allow passing of a request to StandaloneMm Core through the Firmware
Framework(FF-A) using FFA_MSG_SEND_DIRECT_REQ method. This method is
used as a mechanism for requesting some service from StandaloneMm.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Instead of running StMM in SPM, OP-TEE creates a new secure partition,
which emulates SPM and isolates StMM from the rest of the Trusted
Applications (TAs). We can then compile StMM as an FD image and run it
in OP-TEE. With the addition of a new RPMB driver, we can leverage OP-TEE
and store variables to an RPMB device.
Since EDK2 upper layers expect byte addressable code, for the RPMB to
work, we need to allocate memory and sync it with the hardware on
read/writes. Since DynamicPCDs are not supported in that context we
can only use PatchablePCDs. So let's switch them to Pcd instead of
FixedPcd and accomodate the new driver. While at it, move the rest
of the variables under Pcd section, instead of FixedPcd -- this is in
line with how the variables are defined in the other Variable
modules.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Allow setting memory region's permissions using either of the Firmware
Framework(FF-A) ABI transport or through the earlier used SVC calls.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Allow getting memory region's permissions using either of the Firmware
Framework(FF-A) ABI transport or through the earlier used SVC calls.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add the FF-A header for invoking the mmu functions using FF-A calls as
the transport mechanism. Support for invoking the functions through
FF-A will be added in a subsequent patch.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add support for reporting completion of a MM request using either the
Firmware Framework(FF-A) ABI transport or through the earlier used SVC
calls.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Co-developed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
With the introduction of Firmware Framework(FF-A), a Secure Partition
can get the SPM version either using FF-A calls or through the
existing svc calls. Use a runtime check to use either of the two
methods based on the Pcd feature flag value.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Co-developed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Declare the values of SPM major and minor versions as macros with FF-A
enabled, which can be used in the module for checking the SPM version
compatibility. These SPM major and minor version numbers are mandated
for having support for the Firmware Framework(FF-A) feature enabled.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Declare module wide variables for SPM major and minor versions to be
used in checking the SPM version compatibility. Use the SPM major and
minor version macros declared in the previous patch for the version
check.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Declare the values of SPM major and minor versions as macros which can
be used in the module for checking the SPM version compatibility.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
The Secure Partition(SP) can request services from the Secure
Partition Manager Core(SPMC) either through FF-A calls or through the
existing SVC calls. Add a feature flag Pcd for enabling the FF-A
method -- when this is set to FALSE, the SP uses the existing SVC
calls for making the requests.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add the Firmware Framework(FF-A) header in the StandaloneMm entry
point driver. Support for invoking the functions through FF-A will be
added in a subsequent patch.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
The Arm SMC calling convention standard v1.2 allows 8 input and output
parameter registers. The FF-A specification relies on this
communication. This patch extends the number of output registers
returned by ArmCallSvc() to match this convention.
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
This patch adds a rudimentary header file with defines for FF-A ABIs
that will be used as the transport between S-EL0 and the SPM
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Update OemGetChassisType in OemMiscLib to return MISC_CHASSIS_TYPE
instead of EFI_STATUS, which matches other OemMiscLib functions.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
o Rename 'mHiiHandle' parameter in OemUpdateSmbiosInfo to 'HiiHandle'.
o Rename 'Offset' parameter in OemUpdateSmbiosInfo to 'Field'.
o Rename OemGetProcessorMaxSockets to OemGetMaxProcessors.
o Rename OemIsSocketPresent to OemIsProcessorPresent.
o Update Universal/Smbios to follow the changes to OemMiscLib.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The return type should be on the line before any EFIAPI specifier.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The DEBUG message for using compilation time epoch is appearing very
frequently on DEBUG firmware builds, for example during UEFI SCT runs.
Reduce verbosity to avoid the annoying repetitive message.
Signed-off-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Currently the console is connected before EndOfDxe causing OptionsROMs
to be loaded, but their drivers aren't used and thus no GOP is installed.
To make use of 3rdparty OptionROMs connect the console after EndOfDxe.
Tested on Intel CFL board using Nvidia Quadro GPU.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
The PciLib depends on PCDs
- PcdPciExpressBaseAddress
- PcdPciExpressBaseSize
being updated by BlSupportDxe before MMCONF accesses are working.
Add BlSupportDxe to APRIORI to start it first and get the system into
an usable state where at least PCI accesses work reliable.
Fixes a bug where BlSupportDxe is scheduled too late and other DXEs fail
to load due to broken PCI access.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Some platforms advertise support for a 16550 UART, but are not
compatible with the PNP0500 HID. Allow them to override the HID by
setting PcdNonBsaCompliant16550SerialHid.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3204
Fixes the following compiler warning in VS2019 by changing defining
the MmramRangeCount variable to be UINTN and type casting prior
to value assignment.
\edk2\StandaloneMmPkg\Core\StandaloneMmCore.c(570): error C2220:
the following warning is treated as an error
\edk2\StandaloneMmPkg\Core\StandaloneMmCore.c(570): warning C4244:
'=': conversion from 'UINT64' to 'UINT32', possible loss of data
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The ARM ProcessorSubClassDxe build was broken due to changes in the
SmbiosProcessor API and an unused variable.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Platforms are expected to override these PCDs to provide relevant
information to SMBIOS.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
This code provides information for the SMBIOS Type 13 table.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
ProcessorSubClassDxe provides SMBIOS CPU information using generic
methods combined with calls into OemMiscLib.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Add a Null implementation of OemMiscLib.
OemMiscLib provides functions that platforms implement to fill in
SMBIOS information for the SmbiosMiscDxe and ProcessSubClassDxe drivers.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
OemMiscLib.h provides the interface which platforms should implement to
interact with the SmbiosMiscDxe and ProcessorSubClassDxe drivers to
update SMBIOS tables.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Add helper function to read the CCSIDR2 register.
This is used when CCIDX is supported in AARCH32 mode.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The ARM Architecture Reference Manual for ARMv8-A defines up to
seven levels of cache, L1 through L7.
Define MAX_ARM_CACHE_LEVEL to be 7.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Update the cache definitions in ArmLibPrivate.h based on current
ARMv8 documentation.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
When CCIDX is supported, the Current Cache Size ID Register contains
data above 32 bits: namely the number of sets. Avoid truncating this
by returning a UINTN instead of UINT32. On AARCH32, the expanded
number of sets data can be read via the CCSIDR2 register.
Also, add Doxygen comments for the function.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In AARCH32, CCIDX support is indicated in the MMFR4 register - unlike
under AARCH64 where it's in MMFR2. Add a helper function to read it.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Add helper function to read the MMFR2 register. We will need this to
determine CCIDX support.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add register encoding definition for Memory Model Feature Register 2.
We need to define it here because we build for ARMv8.0, which doesn't
have it.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add a bitfield that describes the structure of the byte in the Status
field of the SMBIOS Type 4 Processor Information table.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Sami Mujawar <sami.mujawar@arm.com>
The ARM SMC Architecture functions were missing from ArmStdSmc.h.
Add them, based on the SMC Calling Convention version 1.2 specification.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
If the output file path is a relative path, the split
tool will create the output file under the input file path.
But the expected behavior for this case is the output file
should be relative to the current directory. This patch will
fix this bug.
If the output file path is not specified and output prefix is not
specified, the output file should be under the input file path
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Add HiiGetStringEx and leveraged by HiiGetString function to support
getting string with the best language in optionally. This avoids the
string in x-uefi language is misled to the language defined by
"PlatformLang" or the "Supported Languages". This change is introduced
to support x-uefi keyword language for configuring BIOS setting.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If no valid boot options were found, PlatformBootManagerLib refreshes a
set of sane default options and then reboots. However, if there is in
fact no persistent varstore, the same thing happens again on next boot,
and we end up in an endlessly rebooting loop.
So when PcdEmuVariableNvModeEnable is TRUE, skip the reboot step and
enter the setup menu instead.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3045 (https://bugzilla.tianocore.org/show_bug.cgi?id=3045)
Add a new parser for the Heterogeneous Memory Attribute Table. The
parser also validates some fields for this table.
The HMAT table is used to describe the memory attributes such as memory
side cache attributes and bandwidth and latency details related to
memory proximity domains. The info in the HMAT table can be used by an
operating system for optimisation.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Fix the bug of terminal fifo buffer overflow with UINT8 type.
typedef struct {
UINT8 Head;
UINT8 Tail;
UINT8 Data[RAW_FIFO_MAX_NUMBER + 1];
} RAW_DATA_FIFO;
RAW_FIFO_MAX_NUMBER is 256.
the data buffer size is 257 (Index from 0 to 256), but the max value of
the index, Head or Tail (UINT8), is 255. That means the last data of the
data buffer would be always empty if we use Head/Tail to output/input the
data correctly. And because of the incorrect buffer size the FIFO full
check "((Tail + 1) % (RAW_FIFO_MAX_NUMBER + 1)) == Head" would never meet.
Signed-off-by: gechao <gechao@greatwall.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ProcessOptionRomLight() assumes that OpRom has already been
processed in the previous full enumeration and updates
AllOpRomProcessed flag to TRUE by default. However, this may not
be applicable with other pre-stage boot firmwares.
This will update AllOpRomProcessed flag properly by checking
PciRomGetImageMapping().
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This change abstracts CpuIo2Smm driver entrypoint into separate file and
moves functions/definitions that are not substantially specific to
Traditional MM (SMM) into CpuIo2Mm.* in order to set ways for Standalone
MM support in the future.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This change added a new instance of Tcg2PhysicalPresenceLib to support
MM_STANDALONE type drivers. It centralizes the common routines into
shared files and abstract the library constructor into corresponding
files to implement each constructor function prototypes.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Qi Zhang <qi1.zhang@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This change added a new instance of AcpiTimerLib for StandaloneMm core
and drivers. It centralizes the common routines into shared files and
abstract the library constructor into corresponding files to accommodate
each constructor function prototypes.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This change added support of RSC router under StandaloneMm. It replaces
SMM version ReportStatusCode protocol definitions with MM version. This
patch also switched to use gMmst instead of gSmst. Lastly, it abstracts
standalone and traditional MM driver entrypoints into separate files to
allow maximal common implementations.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change added support of FPDT driver under StandaloneMm. It replaces
SMM version ReportStatusCode protocol with MM version. This patch also
abstracts standalone and traditional MM interfaces into separate files to
support each corresponding function prototypes and implementations.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change added support of StandaloneMm for ReportStatusCodeLib. It
adds a new instance of ReportStatusCodeLib for MM_STANDALONE type, and
abstracts the references of gMmst and gSmst functionalities into separate
files in order to link in proper Service Table for SMM core/drivers.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change added support of StandaloneMm for SmmLockBoxLib. It replaces
gSmst with gMmst to support both traditional MM and standalone MM. The
contructor and desctructor functions are abstracted to support different
function prototype definitions.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Assigning MmramRangeCount from MmCorePrivate (UINT64) to local variable
MmramRangeCount (UINT32) will cause compilation failure due to "warning
C4244: '=': conversion from 'UINT64' to 'UINT32', possible loss of data".
This changes defines local MmramRangeCount as UINTN type and adds type
cast before value assignment.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This change adds support of x64 version of StandaloneMmCoreHobLib. It
brings in global variable "gHobList" through StandaloneMmCoreEntryPoint,
imports implementation from DxeCoreHobLib.inf to support x64 Mm Core and
moved shared functional plementations into a common file.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Function '_ModuleEntryPoint' is a pre-defined interface for various EFI
module types and should not be caught violating EFI coding style. This
change added '_ModuleEntryPoint' into exception list to fix EFI coding
style error 8006 during CI build.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3179
When BSP first time wakes all APs, each AP atomically increases
CpuMpData->CpuCount and CpuMpData->FinishedCount.
Each AP atomically increases CpuMpData->NumApsExecuting
in early assembly code and decreases it before it enters to HLT or
MWAIT state.
Putting them together, the 3 variables are changed in the following order:
1. NumApsExecuting++ // in assembly
2. CpuCpunt++
4. FinishedCount++
3. NumApsExecuting-- // in C
BSP waits for a certain timeout and then polls NumApsExecuting
until it drops to zero. It assumes all APs are waken up concurrently
and NumApsExecuting only drops to zero when all APs have checked in.
Then it additionally waits for FinishedCount == CpuCount - 1. (FinishedCount doesn't include BSP while CpuCount includes BSP.)
There is no need to additionally wait for
FinishedCount == CpuCount - 1 because when NumApsExecuting == 0,
the number of increament of FinishedCount and CpuCount should equal.
This patch simplifies the code to remove "CpuCount++" in
ApWakeupFunction() and
assigns FinishedCount + 1 to CpuCount after WakeUpAP().
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3182
Fix the order of operations in ApWakeupFunction() when PcdCpuApLoopMode
is set to HLT mode that uses INIT-SIPI-SIPI to wake APs. In this mode,
volatile state is restored and saved each time a INIT-SIPI-SIPI is sent
to an AP to request a function to be executed on the AP. When the
function is completed the volatile state of the AP is saved. However,
the counters NumApsExecuting and FinishedCount are updated before
the volatile state is saved. This allows for a race condition window
for the BSP that is waiting on these counters to request a new
INIT-SIPI-SIPI before all the APs have completely saved their volatile
state. The fix is to save the AP volatile state before updating the
NumApsExecuting and FinishedCount counters.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3183
Under SEV-ES, a write to the flash device is done using a direct VMGEXIT
to perform an MMIO write. The address provided to the MMIO write must be
the physical address of the MMIO write destitnation. During boot, OVMF
runs with an identity mapped pagetable structure so that VA == PA and the
VMGEXIT MMIO write destination is just the virtual address of the flash
area address being written.
However, when the UEFI SetVirtualAddressMap() API is invoked, an identity
mapped pagetable structure may not be in place and using the virtual
address for the flash area address is no longer valid. This results in
writes to the flash not being performed successfully. This can be seen
by attempting to change the boot order under Linux. The update will
appear to be performed, based on the output of the command. But rebooting
the guest will show that the new boot order has not been set.
To remedy this, save the value of the flash base physical address before
converting the address as part of SetVirtualAddressMap(). The physical
address can then be calculated by obtaining the offset of the MMIO target
virtual address relative to the flash base virtual address and adding that
to the original flash base physical address. The resulting value produces
a successful MMIO write during runtime services.
Fixes: 437eb3f7a8
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <84a5f9161541db5aa3b57c96b737afbcb4b6189d.1611410263.git.thomas.lendacky@amd.com>
[lersek@redhat.com: SetVitualAddressMap() -> SetVirtualAddressMap() typo
fix, in both the commit message and the code comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3167
When StackGuard is enabled, the CpuMp driver allocates
known good stacks for all CPUs for DF# and PF# exceptions.
It uses AllocatePool to do so.
The size needed equals to 64KB
= StackSize (2K) * ExceptionNumber (2) * NumberOfProcessors (16)
However, AllocatePool max allocation size is less than 64K.
To fix the issue, AllocatePages() is used.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
NumberOfCpus local variable in GetAcpiCpuData will be uninitialized
when CpuS3DataDxe runs before DxeRegisterCpuFeaturesLib (linked by
CpuFeaturesDxe) because there is no code to initialize it at
(AcpiCpuData != NULL) execution path.
The issue is exposed after cefad282fb
and 38ee7bafa7.
There was negligence in that code review.
One further topic may be "Could EDK2 CI be enhanced to catch this kind
of uninitialized local variable case?". :)
This patch fixes this regression issue.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Message-Id: <20210121093944.1621-1-star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3165
There are 2 reasons to convert Split tool from C to Python.
1. We are in the process of moving the Basetools Python code
to a separate repository. But there still are many C tools under
edk2/BaseTools. To make all Basetools be in the separate repo,
we can convert the C tools to Python tools.
2. The original Split tool is very slow. This python tool can reduce
90% time.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
CpuS3DataDxe allocates the "RegisterTable" and "PreSmmInitRegisterTable"
arrays in ACPI_CPU_DATA just so every processor in the system can have its
own empty register table, matched by APIC ID. This has never been useful
in practice.
Given commit e992cc3f48 ("UefiCpuPkg PiSmmCpuDxeSmm: Reduce SMRAM
consumption in CpuS3.c", 2021-01-11), simply leave both
"AcpiCpuData->RegisterTable" and "AcpiCpuData->PreSmmInitRegisterTable"
initialized to the zero address. This simplifies the driver, and saves
both normal RAM (boot services data type memory) and -- in PiSmmCpuDxeSmm
-- SMRAM.
(This simplification backs out a good chunk of commit 1158fc8e2c
("OvmfPkg/CpuS3DataDxe: enable S3 resume after CPU hotplug", 2020-03-04).
But CpuS3DataDxe still differs between UefiCpuPkg and OvmfPkg, due to the
latter supporting CPU hotplug; thus, we can't remove OvmfPkg/CpuS3DataDxe
altogether.)
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3159
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210119155440.2262-5-lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
CpuS3DataDxe allocates the "RegisterTable" and "PreSmmInitRegisterTable"
arrays in ACPI_CPU_DATA just so every processor in the system can have its
own empty register table, matched by APIC ID. This has never been useful
in practice.
Given commit e992cc3f48 ("UefiCpuPkg PiSmmCpuDxeSmm: Reduce SMRAM
consumption in CpuS3.c", 2021-01-11), simply leave both
"AcpiCpuData->RegisterTable" and "AcpiCpuData->PreSmmInitRegisterTable"
initialized to the zero address. This simplifies the driver, and saves
both normal RAM (boot services data type memory) and -- in PiSmmCpuDxeSmm
-- SMRAM.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3159
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Message-Id: <20210119155440.2262-4-lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
There are lots of fields in ACPI_CPU_DATA structure while only
followings are accessed by CpuFeature infra:
* NumberOfCpus
* PreSmmInitRegisterTable // pointer
* RegisterTable // pointer
* CpuStatus
* ApLocation // pointer
So it's possible that an implementation of CpuS3DataDxe doesn't
allocate memory for PreSmmInitRegisterTable/RegisterTable/ApLocation.
This patch handles the case when CpuS3DataDxe doesn't allocate
memory for PreSmmInitRegisterTable/RegisterTable.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3159
Signed-off-by: Ray Ni <ray.ni@intel.com>
[lersek@redhat.com: update CC list, add BZ reference, add my S-o-b]
[lersek@redhat.com: deal with RegisterTable and PreSmmInitRegisterTable
being zero independently of each other; replacing the ASSERT()]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210119155440.2262-2-lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In order to take advantages of extra pci root buses in ArmVirtPkg, it is
necessary to scan extra root buses when getting root briges. And now
PciHostBridgeUtilityLib already provides a set of utility functions that
support for extra pci root buses, like PciHostBridgeUtilityGetRootBridges()
/ PciHostBridgeUtilityFreeRootBridges(). So let's rebase
ArmVirtPkg/FdtPciHostBridgeLib to PciHostBridgeUtilityGetRootBridges() /
PciHostBridgeUtilityFreeRootBridges() to extend ArmVirtPkg with extra
pci root buses support.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Message-Id: <20210119011302.10908-11-cenjiahui@huawei.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Extend parameter list of PciHostBridgeUtilityGetRootBridges() with BusMin/
BusMax, so that the utility function could be compatible with ArmVirtPkg
who uses mutable bus range [BusMin, BusMax] insteand of [0, PCI_MAX_BUS].
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3059
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210119011302.10908-10-cenjiahui@huawei.com>
[lersek@redhat.com: fix logging of UINTN values BusMin, BusMax]
[lersek@redhat.com: keep zeroing of (*Count) centralized]
[lersek@redhat.com: fix typos in ExtraRootBridges comment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In NOOPT and DEBUG builds, if "PcdMaximumLinkedListLength" is nonzero,
then several LIST_ENTRY *node* APIs in BaseLib compare the *full* list
length against the PCD.
This turns the time complexity of node-level APIs from constant to linear,
and that of full-list manipulations from linear to quadratic.
(See some example OVMF numbers in the previous patch.)
Checking list lengths against an arbitrary maximum -- default value, and
current ArmVirtPkg setting: 1,000,000 -- seems useless even in NOOPT and
DEBUG builds, while the cost is significant; so set the PCD to 0.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3152
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-11-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In NOOPT and DEBUG builds, if "PcdMaximumLinkedListLength" is nonzero,
then several LIST_ENTRY *node* APIs in BaseLib compare the *full* list
length against the PCD.
This turns the time complexity of node-level APIs from constant to linear,
and that of full-list manipulations from linear to quadratic.
As an example, consider the EFI_SHELL_FILE_INFO list, which is a data
structure that's widely used in the UEFI shell. I randomly extracted 5000
files from "/usr/include" on my laptop, spanning 1095 subdirectories out
of 1538, and then ran "DIR -R" in the UEFI shell on this tree. These are
the wall-clock times:
PcdMaximumLinkedListLength PcdMaximumLinkedListLength
=1,000,000 =0
-------------------------- ---------------------------
FAT 4 min 31 s 18 s
virtio-fs 5 min 13 s 1 min 33 s
Checking list lengths against an arbitrary maximum (default: 1,000,000)
seems useless even in NOOPT and DEBUG builds, while the cost is
significant; so set the PCD to 0.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Peter Grehan <grehan@freebsd.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3152
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-10-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Introduce the ShellSortFileList() function, for sorting an
EFI_SHELL_FILE_INFO list, by FileName or by FullName.
Duplicates can be kept in the same list, or separated out to a new list.
In either case, the relative order between duplicates does not change (the
sorting is stable).
For the sorting, use OrderedCollectionLib rather than SortLib:
- The PerformQuickSort() function from the latter has quadratic worst-case
time complexity, plus it is implemented recursively (see
"MdeModulePkg/Library/UefiSortLib/UefiSortLib.c"). It can also not
return an error on memory allocation failure.
- In comparison, the Red-Black Tree instance of OrderedCollectionLib sorts
in O(n*log(n)) worst-case time, contains no recursion with the default
PcdValidateOrderedCollection=FALSE setting, and the OrderedCollectionLib
class APIs return errors appropriately.
The OrderedCollectionLib APIs do not permit duplicates natively, but by
using lists as collection entries, stable sorting of duplicates can be
achieved.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3151
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some UEFI shell commands read and write files in chunks. The chunk size is
given by "PcdShellFileOperationSize", whose default in
"ShellPkg/ShellPkg.dec" is 4KB (0x1000).
The virtio-fs daemon of QEMU advertizes a 128KB maximum buffer size by
default, for the FUSE_WRITE operation.
By raising PcdShellFileOperationSize 32-fold, the number of FUSE write
requests shrinks proportionately, when writing large files. And when a
Virtio Filesystem is not used, a 128KB chunk size is still not
particularly wasteful.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3125
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-4-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some UEFI shell commands read and write files in chunks. The chunk size is
given by "PcdShellFileOperationSize", whose default in
"ShellPkg/ShellPkg.dec" is 4KB (0x1000).
The virtio-fs daemon of QEMU advertizes a 128KB maximum buffer size by
default, for the FUSE_WRITE operation.
By raising PcdShellFileOperationSize 32-fold, the number of FUSE write
requests shrinks proportionately, when writing large files. And when a
Virtio Filesystem is not used, a 128KB chunk size is still not
particularly wasteful.
Some ad-hoc measurements on my laptop, using OVMF:
- The time it takes to copy a ~270MB file from a Virtio Filesystem to the
same Virtio Filesystem improves from ~9 seconds to ~1 second.
- The time it takes to compare two identical ~270MB files on the same
Virtio Filesystem improves from ~11 seconds to ~3 seconds.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3125
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20210113085453.10168-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The COMP shell command compares two files byte for byte. In order to
retrieve the bytes to compare, it currently invokes
gEfiShellProtocol->ReadFile() on both files, using a single-byte buffer
every time. This is very inefficient; the underlying
EFI_FILE_PROTOCOL.Read() function may be costly.
Read both file operands in chunks of "PcdShellFileOperationSize" bytes.
Draw bytes for comparison from the internal read-ahead buffers.
Some ad-hoc measurements on my laptop, using OVMF, and the 4KB default of
"PcdShellFileOperationSize":
- When comparing two identical 1MB files that are served by EnhancedFatDxe
on top of VirtioScsiDxe, this patch brings no noticeable improvement;
the comparison completes in <1s both before and after.
- When comparing two identical 1MB files served by VirtioFsDxe, the
comparison time improves from 2 minutes 25 seconds to <1s.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3123
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20210113085453.10168-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We faced a problem with passing through a PCI device with 64GB BAR to UEFI
guest. The BAR is expectedly programmed into 64-bit PCI aperture at 64G
address which pushes physical address space to 37 bits. That is above
36-bit width that OVMF exposes currently to a guest without tweaking
PcdPciMmio64Size knob.
The reverse calculation using this knob was inhereted from QEMU-KVM
platform code where it serves the purpose of finding max accessible
physical address without necessary trusting emulated CPUID physbits value
(that could be different from host physbits). On Xen we expect to use
CPUID policy to level the data correctly to prevent situations with guest
physbits > host physbits e.g. across migrations.
The next aspect raising concern - resource consumption for DXE IPL page
tables and time required to map the whole address space in case of using
CPUID bits directly. That could be mitigated by enabling support for 1G
pages in DXE IPL configuration. 1G pages are available on most CPUs
produced in the last 10 years and those without don't have many phys bits.
Remove all the redundant code now (including PcdPciMmio64.. handling
that's not used on Xen anyway) and grab physbits directly from CPUID that
should be what baremetal UEFI systems do.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Message-Id: <1610509335-23314-1-git-send-email-igor.druzhinin@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Julien Grall <julien@xen.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[lersek@redhat.com: fix up authorship from groups.io-mangled From line]
[lersek@redhat.com: wrap commit message at 74 characters]
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3105
This new library uses a platform agnostic algorithm to get CPU
cache information. It provides user with an API(GetCpuCacheInfo)
to get detailed CPU cache information by each package, each core
type included in this package, and each cache level & type.
This library can be used by code that produces SMBIOS_TABLE_TYPE7
SMBIOS table.
Signed-off-by: Jason Lou <yun.lou@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Commit 8015f3f6d4 ("ArmPlatformPkg: Enable support for flash in
64-bit address space") updated the NorFlash DXE and StMM drivers to
take alternate PCDs into account when discovering the base of the
NOR flash regions.
This introduced a disparity between the declarations of the PCD references
in the .INF files, which permits the use of dynamic PCDs, and the code
itself, which now uses FixedPcdGet() accessors. On platforms that actually
use dynamic PCDs, this results in a build error.
So let's clean this up:
- for the DXE version, use the generic PcdGet() accessors, so dynamic PCDs
are permitted
- for the standalone MM version, redeclare the PCDs as [FixedPcd] in the
.INF description, and switch to the FixedPcdGet() accessors.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
I will no longer work for ARM as of next month, and will therefore
lose access to my @arm.com email account. I intend to remain active
in the Tianocore project nonetheless, so let's update my email accounts
to one that is not tied to my current or future employer.
Cc: <ardb+tianocore@kernel.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Andrew Fish <afish@apple.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3113
According to FAT specification, the length of file path
should not larger than 260. When the length exceed 260,
function FatLocateOFile will return EFI_INVALID_PARAMETER
and the parameter FileHandle will be NULL. Then on the
top-level function?an exception happens when the NULL
pointer is passed and be used.
So adding return value check after calling
LibGetFileHandleFromMenu, if return value is not success,
stop calling LibFindFiles.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
In the following corner case, the build report
will crash. This patch is to fix this problem.
Case:
Multiple SKU are used and 2 more DynamicHii structure Pcds
are set in dsc file under different SKU. And 1 more of those
Pcds are not used in any INF file.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
This patch fixed the hang in UEFICpuPkg when it is dispatched above 4GB.
In UEFI BIOS case CpuInfoInHob is provided to DXE under 4GB from PEI.
When using UEFI payload and bootloaders, CpuInfoInHob will be allocated
above 4GB since it is not provided from bootloader. so we need update
the code to make sure this hob could be accessed correctly in this case.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch makes two refinements to reduce SMRAM consumption in CpuS3.c.
1. Only do CopyRegisterTable() when register table is not empty,
IsRegisterTableEmpty() is created to check whether the register table
is empty or not.
Take empty PreSmmInitRegisterTable as example, about 24K SMRAM consumption
could be reduced when mAcpiCpuData.NumberOfCpus=1024.
sizeof (CPU_REGISTER_TABLE) = 24
mAcpiCpuData.NumberOfCpus = 1024 = 1K
mAcpiCpuData.NumberOfCpus * sizeof (CPU_REGISTER_TABLE) = 24K
2. Only copy table entries buffer instead of whole buffer.
AllocatedSize in SourceRegisterTableList is the whole buffer size.
Actually, only the table entries buffer needs to be copied, and the size
is TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY).
Take AllocatedSize=0x1000=4096, TableLength=100 and NumberOfCpus=1024 as example,
about 1696K SMRAM consumption could be reduced.
sizeof (CPU_REGISTER_TABLE_ENTRY) = 24
TableLength = 100
TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY) = 2400
AllocatedSize = 0x1000 = 4096
AllocatedSize - TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY) = 4096 - 2400 = 1696
NumberOfCpus = 1024 = 1K
NumberOfCpus * (AllocatedSize - TableLength * sizeof (CPU_REGISTER_TABLE_ENTRY)) = 1696K
This patch also corrects the CopyRegisterTable() function description.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210111015419.28368-1-star.zeng@intel.com>
Neither of the "CPU Socket Unpopulated" or "Do not reboot" messages
should contain the word "Bits".
Remove them and update the identifier for the "Do not reboot" message
to remove the word "BITS".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The EfiGetVariable() is used in the entry of this module. So, the
variable services are required to be ready before they are used. This
patch adds the arch protocol gEfiVariableArchProtocolGuid to dependency
expression to guarantee that this module will be started once the
variable protocol is available.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Redfish CRT library is currently used by edk2 JsonLib
(open source jansson project) and edk2 RedfishLib
(libredfish open source project). Redfish CrtLib library
provides the necessary C runtime equivalent edk2 functions
for open source projects.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Commit 55ee36b0c4
("EmbeddedPkg/RealTimeClockRuntimeDxe: Use helper functions from TimeBaseLib")
added a TimeBaseLib dependency to RealTimeClockRuntimeDxe, which now breaks
build of OvmfXen.dsc.
Add a resolution for EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 55ee36b0c4
("EmbeddedPkg/RealTimeClockRuntimeDxe: Use helper functions from TimeBaseLib")
added a TimeBaseLib dependency to RealTimeClockRuntimeDxe, which now breaks
build of EmbeddedPkg.dsc.
Add a resolution for EmbeddedPkg/Library/TimeBaseLib/TimeBaseLib.inf.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Nhi Pham <nhi@os.amperecomputing.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
Protect the GHCB backup pages used by an SEV-ES guest when S3 is
supported.
Regarding the lifecycle of the GHCB backup pages:
PcdOvmfSecGhcbBackupBase
(a) when and how it is initialized after first boot of the VM
If SEV-ES is enabled, the GHCB backup pages are initialized when a
nested #VC is received during the SEC phase
[OvmfPkg/Library/VmgExitLib/SecVmgExitVcHandler.c].
(b) how it is protected from memory allocations during DXE
If S3 and SEV-ES are enabled, then InitializeRamRegions()
[OvmfPkg/PlatformPei/MemDetect.c] protects the ranges with an AcpiNVS
memory allocation HOB, in PEI.
If S3 is disabled, then these ranges are not protected. PEI switches to
the GHCB backup pages in permanent PEI memory and DXE will use these
PEI GHCB backup pages, so we don't have to preserve
PcdOvmfSecGhcbBackupBase.
(c) how it is protected from the OS
If S3 is enabled, then (b) reserves it from the OS too.
If S3 is disabled, then the range needs no protection.
(d) how it is accessed on the S3 resume path
It is rewritten same as in (a), which is fine because (b) reserved it.
(e) how it is accessed on the warm reset path
It is rewritten same as in (a).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <119102a3d14caa70d81aee334a2e0f3f925e1a60.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
In order to be able to issue messages or make interface calls that cause
another #VC (e.g. GetLocalApicBaseAddress () issues RDMSR), add support
for nested #VCs.
In order to support nested #VCs, GHCB backup pages are required. If a #VC
is received while currently processing a #VC, a backup of the current GHCB
content is made. This allows the #VC handler to continue processing the
new #VC. Upon completion of the new #VC, the GHCB is restored from the
backup page. The #VC recursion level is tracked in the per-vCPU variable
area.
Support is added to handle up to one nested #VC (or two #VCs total). If
a second nested #VC is encountered, an ASSERT will be issued and the vCPU
will enter CpuDeadLoop ().
For SEC, the GHCB backup pages are reserved in the OvmfPkgX64.fdf memory
layout, with two new fixed PCDs to provide the address and size of the
backup area.
For PEI/DXE, the GHCB backup pages are allocated as boot services pages
using the memory allocation library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <ac2e8203fc41a351b43f60d68bdad6b57c4fb106.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
The PCIe MMCONFIG range should be treated as an MMIO range. However,
there is a comment in the code explaining why AddIoMemoryBaseSizeHob()
is not called. The AmdSevDxe walks the GCD map looking for MemoryMappedIo
or NonExistent type memory and will clear the encryption bit for these
ranges.
Since the MMCONFIG range does not have one of these types, the encryption
bit is not cleared for this range. Add support to detect the presence of
the MMCONFIG range and clear the encryption bit. This will be needed for
follow-on support that will validate that MMIO is not being performed to
an encrypted address range under SEV-ES.
Even though the encryption bit was set for this range, this still worked
under both SEV and SEV-ES because the address range is marked by the
hypervisor as MMIO in the nested page tables:
- For SEV, access to this address range triggers a nested page fault (NPF)
and the hardware supplies the guest physical address (GPA) in the VMCB's
EXITINFO2 field as part of the exit information. However, the encryption
bit is not set in the GPA, so the hypervisor can process the request
without any issues.
- For SEV-ES, access to this address range triggers a #VC. Since OVMF runs
identity mapped (VA == PA), the virtual address is used to avoid the
lookup of the physical address. The virtual address does not have the
encryption bit set, so the hypervisor can process the request without
any issues.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <711ae2dcb6cb29e4c60862c18330cff627269b81.1610045305.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3108
To help mitigate against ROP attacks, add some checks to validate the
encryption bit position that is reported by the hypervisor.
The first check is to ensure that the hypervisor reports a bit position
above bit 31. After extracting the encryption bit position from the CPUID
information, the code checks that the value is above 31. If the value is
not above 31, then the bit position is not valid, so the code enters a
HLT loop.
The second check is specific to SEV-ES guests and is a two step process.
The first step will obtain random data using RDRAND and store that data to
memory before paging is enabled. When paging is not enabled, all writes to
memory are encrypted. The random data is maintained in registers, which
are protected. The second step is that, after enabling paging, the random
data in memory is compared to the register contents. If they don't match,
then the reported bit position is not valid, so the code enters a HLT
loop.
The third check is after switching to 64-bit long mode. Use the fact that
instruction fetches are automatically decrypted, while a memory fetch is
decrypted only if the encryption bit is set in the page table. By
comparing the bytes of an instruction fetch against a memory read of that
same instruction, the encryption bit position can be validated. If the
compare is not equal, then SEV/SEV-ES is active but the reported bit
position is not valid, so the code enters a HLT loop.
To keep the changes local to the OvmfPkg, an OvmfPkg version of the
Flat32ToFlat64.asm file has been created based on the UefiCpuPkg file
UefiCpuPkg/ResetVector/Vtf0/Ia32/Flat32ToFlat64.asm.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <cb9c5ab23ab02096cd964ed64115046cc706ce67.1610045305.git.thomas.lendacky@amd.com>
This adds two functions IsValidTimeZone() and IsValidDaylight() to check
the time zone and daylight value from EFI time. These functions are
retrieved from the RealTimeClockRuntimeDxe module as they reduce
duplicated code in RTC modules.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The existing NOR Flash DXE and StandaloneMm driver supports NOR flash
devices connected in the 32-bit address space. Extend these drivers to
allow NOR flash devices connected to 64-bit address space to be usable
as well. Also, convert the base address and size sanity check from
ASSERT() to if condition so that even if the firmware is build in
release mode, it can return error if the parameter(s) is/are invalid.
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Tested-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
EmbeddedPkg/TimeBaseLib provides a verification function called
IsTimeValid(), for enforcing the UEFI spec requirements on an EFI_TIME
object.
When EFI_FILE_PROTOCOL.SetInfo() is called in order to update the
timestamps on the file, let's invoke IsTimeValid() first, before passing
the new EFI_FILE_INFO.{CreateTime,LastAccessTime,ModificationTime} values
to EfiTimeToEpoch().
This patch is not expected to make a practical difference, but it's better
to ascertain the preconditions of EfiTimeToEpoch() on the
EFI_FILE_PROTOCOL.SetInfo() caller. The FAT driver (EnhancedFatDxe) has a
similar check, namely in FatSetFileInfo() -> FatIsValidTime().
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210107095051.22715-1-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
The ECC tool reports error [8005] Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
for the constants SPM_MAJOR_VER, SPM_MINOR_VER & BOOT_PAYLOAD_VERSION.
Fix this by changing converting these constant variables to #defined
values.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Bugzilla: 3150 (https://bugzilla.tianocore.org/show_bug.cgi?id=3150)
Fix the ECC tool reported error "[3002] Non-Boolean comparisons
should use a compare operator".
Also fix the following:
- add curly braces for 'if' condition statements to comply
with the coding standard.
- The value returned by GET_GUID_HOB_DATA() is stored in
*HobData. Therefore, check *HobData against NULL. The
original code was checking HobData which is incorrect.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Fixing this error implies extracting the CpsrChar
array from CpsrString and making it a static variable.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
The body of a function should be contained by open
and close braces that must be in the first column
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
The body of a function should be contained by open
and close braces that must be in the first column
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Boolean values and variable type BOOLEAN should not use
explicit comparisons to TRUE or FALSE
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Brackets are also added to comply to with the coding
standard.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The header of the file is not formatted properly, making
the Ecc tool crash when running on the ArmPkg.
The following command was run:
./BaseTools/BinWrappers/PosixLike/Ecc
-c BaseTools/Source/Python/Ecc/config.ini
-e BaseTools/Source/Python/Ecc/exception.xml
-t ArmPkg -r ArmPkgEcc.xls
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
ConSplitter is using EFI_LIGHTGRAY foreground color for ConOut
and EFI_MAGENTA for StdErr consoles. This is impacting the DebugLib
output on that same serial console (e.g. DebugLibSerialPort) after
gEfiStandardErrorDeviceGuid is installed on that port. The impact
also extends to Linux serial console output in OVMF because it inherits
the color setting from the firmware.
This is inconsistent and annoying, with MAGENTA being barely legible on
a black background.
Let's change StdErr default color to LIGHTGRAY for consistency and
readability. This results in the same color being used for all consoles
sharing the same serial port (ConOut, StdErr, DebugLib, OS console).
Platforms wishing to distinguish the colors of consoles can do so in
their own Platform BDS initialization.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Signed-off-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie>
(On an RPi 4 platform where this was another annoyance)
REF: https://github.com/pftf/RPi4/issues/115
GraphicsConsoleDxe defaults the ConOut Mode.CursorVisible to TRUE.
However, the driver never draws the cursor during init. This results
in the first call to disable the cursor (using ConOut->EnableCursor(FALSE))
to actually draw the cursor on the screen, as the logic in FlushCursor
depends on the Mode.CursorVisible state to determine if it should draw or
erase the cursor.
Fix by changing the default CursorVisible in this driver to FALSE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Cc: Pete Batard <pete@akeo.ie>
Signed-off-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie>
(On an RPi4 platform where we had this annoyance of an unwanted cursor
displaying on top of the platform logo)
EdkLogger.ERROR() was replaced with EdkLogger.error() to deliver the
expected error message when an error occurs.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Implement a version of the NOR Flash driver that can execute
in standalone MM context.
This is used to access the secure variable storage, it only
supports EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
In preparation of creating a standalone MM version of the
NOR Flash driver, refactor the existing pieces into a core
driver. NorFlashDxe.c has the DXE instantiation code,
FVB initialization code and some common functions.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Variable name does not follow the rules:
1. First character should be upper case
2. Must contain lower case characters
3. No white space characters
4. Global variable name must start with a 'g'
Indeed, according to the EDK II C Coding Standards
Specification, s5.6.2.2 "Enumerated Types" and
s4.3.4 Function and Data Names, elements of an
enumerated type shoud be a mixed upper- and
lower-case text.
A max element is also added, as advised by
s5.6.2.2.3 of the same document.
Reference:
https://edk2-docs.gitbook.io/edk-ii-c-coding-standards-specification/
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3126
1. If use PeiDxeDebugLibReportStatusCode as DebugLib, then some logs
after ExitBootService() will be lost.
2. The root cause:
2.1 The original code will register an unregister function
of gEfiEventExitBootServicesGuid, this unregister function will call
EFI_RSC_HANDLER_PROTOCOL->Unregister and does not support log through
serial port.
2.2 And some other drivers also register call back funtions of
gEfiEventExitBootServicesGuid.
2.3 Then after the unregister function is called, other call back
functions can't out log if them use RSC as DebugLib.
3. The DxeMain will report status code EFI_SW_BS_PC_EXIT_BOOT_SERVICES
after notify all the call back functions of
gEfiEventExitBootServicesGuid.
4. Solution: the StatusCodeHandlerRuntimeDxe.c will not register an
unregister function of gEfiEventExitBootServicesGuid, but unregister it
after receive the status code of EFI_SW_BS_PC_EXIT_BOOT_SERVICES.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Ming Tan <ming.tan@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The Ecc tool currently reports the initialization of variables
at declaraton if the variable is non-constant and declared
in a function. Static variables locally defined in functions
should also be allowed to be initialized at declaration.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The ECC tool crashes if a C file has an incorrect file header
format.
The file ArmPkg\Library\ArmMmuLib\AArch64\ArmMmuPeiLibConstructor.c
has a file header in the incorrect format. It uses # to mark the
header comments instead of enclosing the file header in /* */. This
may have been a result of an INF file header being copied to a C
file.
A separate patch fixes the C file but ECC tool should
not crash if a file with an incorrect header is found.
Therefore, update the ECC tool to prevent it from crashing if an
incorrect file header is found. With this change the ECC tool will
report the incorrect header issue without crashing.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The EFI_FILE_PROTOCOL.SetInfo() member is somewhat under-specified; one of
its modes of operation is renaming/moving the file.
In order to create the destination pathname in canonical format, 2*2=4
cases have to be considered. For the sake of discussion, assume the
current canonical pathname of a VIRTIO_FS_FILE is "/home/user/f1.txt".
Then, consider the following rename/move requests from
EFI_FILE_PROTOCOL.SetInfo():
Destination requested Destination Move into Destination in
by SetInfo() relative? directory? canonical format
--------------------- ----------- ---------- -----------------------
L"\\dir\\f2.txt" no no "/dir/f2.txt"
L"\\dir\\" no yes "/dir/f1.txt"
L"dir\\f2.txt" yes no "/home/user/dir/f2.txt"
L"dir\\" yes yes "/home/user/dir/f1.txt"
Add the VirtioFsComposeRenameDestination() function, for composing the
last column from the current canonical pathname and the SetInfo() input.
The function works on the following principles:
- The prefix of the destination path is "/", if the SetInfo() rename
request is absolute.
Otherwise, the dest prefix is the "current directory" (the most specific
parent directory) of the original pathname (in the above example,
"/home/user").
- The suffix of the destination path is precisely the SetInfo() request
string, if the "move into directory" convenience format -- the trailing
backslash -- is not used. (In the above example, L"\\dir\\f2.txt" and
L"dir\\f2.txt".)
Otherwise, the suffix is the SetInfo() request, plus the original
basename (in the above example, L"\\dir\\f1.txt" and L"dir\\f1.txt").
- The complete destination is created by fusing the dest prefix and the
dest suffix, using the VirtioFsAppendPath() function.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-43-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
For reading through a directory stream with tolerable performance, we'll
have to call FUSE_READDIRPLUS each time with such a buffer that can
deliver a good number of variable size records
(VIRTIO_FS_FUSE_DIRENTPLUS_RESPONSE elements). Every time we'll do that,
we'll turn the whole bunch into an array of EFI_FILE_INFOs immediately.
EFI_FILE_PROTOCOL.Read() invocations (on directories) will be served from
this EFI_FILE_INFO cache.
Add the fields for the EFI_FILE_INFO cache to VIRTIO_FS_FILE:
- initialize them in Open() and OpenVolume(),
- release the cache in Close() and Delete(),
- also release the cache when the directory is rewound, in SetPosition().
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-36-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add the VirtioFsFuseReadFileOrDir() function, for sending the FUSE_READ or
FUSE_READDIRPLUS command to the Virtio Filesystem device.
Parsing the structured FUSE_READDIRPLUS output is complex, and cannot be
integrated into the wrapper function. Given that fact, FUSE_READ and
FUSE_READDIRPLUS turn out to need identical low-level handling, except for
the opcode. Hence the shared wrapper function.
(It's prudent to verify whether the FUSE server supports FUSE_READDIRPLUS,
so update the session init code accordingly.)
This is the first FUSE request wrapper function that deals with a variable
size tail buffer.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-33-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VirtioFsFuseAttrToEfiFileInfo() function, for converting
FUSE inode attributes to EFI_FILE_INFO.
The EpochToEfiTime() function from EmbeddedPkg's TimeBaseLib proves
invaluable for converting the file access times.
This is the first time we consume TimeBaseLib in OvmfPkg, so add the
necessary lib class resolution. We need not modify any ArmVirtPkg DSC
files: see commit af5fed90bf ("ArmPlatformPkg,ArmVirtPkg: delete
redundant PL031 functions", 2017-05-10).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-22-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
EFI_FILE_PROTOCOL.Open() -- for opening files -- and
EFI_FILE_PROTOCOL.SetInfo() -- for renaming files -- will require us to
append a relative UEFI pathname to an absolute base pathname. In turn,
components of the resultant pathnames will have to be sent to virtiofsd,
which does not consume UEFI-style pathnames.
We're going to maintain the base pathnames in canonical POSIX format:
- absolute (starts with "/"),
- dot (.) and dot-dot (..) components resolved/removed,
- uses forward slashes,
- sequences of slashes collapsed,
- printable ASCII character set,
- CHAR8 encoding,
- no trailing slash except for the root directory itself,
- length at most VIRTIO_FS_MAX_PATHNAME_LENGTH.
Add a helper function that can append a UEFI pathname to such a base
pathname, and produce the result in conformance with the same invariants.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-17-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The two member functions that free the EFI_FILE_PROTOCOL object are
Close() and Delete(). Before we create VIRTIO_FS_FILE objects with
EFI_FILE_PROTOCOL.Open() later in this patch series, extend each of these
"destructor" functions to get rid of the FuseHandle and NodeId resources
properly -- in a way that matches each function's own purpose.
For the time being, VirtioFsSimpleFileDelete() only gets a reminder about
its core task (namely, removing the file), as the needed machinery will
become only later. But we can already outline the "task list", and deal
with the FuseHandle and NodeId resources. The "task list" of
VirtioFsSimpleFileDelete() is different from that of
VirtioFsSimpleFileClose(), thus both destructors diverge at this point.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-16-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
With the help of the VirtioFsFuseOpenDir() and
VirtioFsFuseReleaseFileOrDir() functions introduced previously, we can now
open and close the root directory. So let's implement
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.OpenVolume().
OpenVolume() creates a new EFI_FILE_PROTOCOL object -- a reference to the
root directory of the filesystem. Thus, we have to start tracking
references to EFI_SIMPLE_FILE_SYSTEM_PROTOCOL, lest we unbind the
virtio-fs device while files are open.
There are two methods that release an EFI_FILE_PROTOCOL object: the
Close() and the Delete() member functions. In particular, they are not
allowed to fail with regard to resource management -- they must release
resources unconditionally. Thus, for rolling back the resource accounting
that we do in EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.OpenVolume(), we have to
implement the first versions of EFI_FILE_PROTOCOL.Close() and
EFI_FILE_PROTOCOL.Delete() in this patch as well.
With this patch applied, the UEFI shell can enter the root directory of
the Virtio Filesystem (such as with the "FS3:" shell command), and the
"DIR" shell command exercises FUSE_OPENDIR and FUSE_RELEASEDIR, according
to the virtiofsd log. The "DIR" command reports the root directory as if
it were empty; probably because at this time, we only allow the shell to
open and to close the root directory, but not to read it.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-12-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The VirtioFsFuseCheckResponse() function dedicates the EFI_DEVICE_ERROR
status code to the case when the Virtio Filesystem device explicitly
returns an error via the "VIRTIO_FS_FUSE_RESPONSE.Error" field.
Said field effectively carries a Linux "errno" value. Introduce a helper
function for mapping "errno" values to (hopefully) reasonable EFI_STATUS
codes. This way we'll be able to propagate "errno" values as EFI_STATUS
return codes along the UEFI call stack -- in some detail anyway.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-8-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Introduce the VIRTIO_FS_FUSE_REQUEST and VIRTIO_FS_FUSE_RESPONSE
structures, which are the common headers for the various FUSE
request/response structures.
Introduce the VirtioFsFuseNewRequest() helper function for populating
VIRTIO_FS_FUSE_REQUEST, from parameters and from a VIRTIO_FS-level request
counter.
Introduce the VirtioFsFuseCheckResponse() helper function for verifying
most FUSE response types that begin with the VIRTIO_FS_FUSE_RESPONSE
header.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-7-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
In preparation for the variously structured FUSE request/response
exchanges that virtio-fs uses, introduce a scatter-gather list data type.
This will let us express FUSE request-response pairs flexibly.
Add a function for validating whether a (request buffer list, response
buffer list) pair is well-formed, and supported by the Virtio Filesystem
device's queue depth.
Add another function for mapping and submitting a validated pair of
scatter-gather lists to the Virtio Filesystem device.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-6-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
[lersek@redhat.com: suppress useless VS2019 warning about signed/unsigned
comparison in VirtioFsSgListsValidate()]
Add the VirtioFsInit(), VirtioFsUninit(), and VirtioFsExitBoot()
functions.
In VirtioFsInit():
- Verify the host-side config of the virtio-fs device.
- Save the filesystem label ("tag") for later, from the configuration area
of the virtio-fs device.
- Save the virtio queue size for later as well.
- Set up the virtio ring for sending requests.
In VirtioFsUninit():
- Reset the device.
- Tear down the virtio ring.
In VirtioFsExitBoot():
- Reset the device.
With this patch, the UEFI connect / disconnect controller operations
involve virtio setup / teardown; they are visible in the virtio-fs
daemon's log file. The virtiofsd log also confirms the device reset in
VirtioFsExitBoot(), when an OS is booted while the virtio-fs device is
bound.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-5-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Complete the Supported, Start, and Stop member functions of
EFI_DRIVER_BINDING_PROTOCOL sufficiently for exercising the UEFI driver
model:
- bind virtio-fs devices,
- produce placeholder EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instances on them.
On the "TO_START" (= Virtio) side, the VirtioFsBindingSupported() function
verifies the Virtio subsystem ID for the virtio-fs device (decimal 26 --
see
<https://github.com/oasis-tcs/virtio-spec/blob/87fa6b5d8155/virtio-fs.tex>).
Beyond that, no actual Virtio setup is performed for now. Those bits are
going to be implemented later in this series.
On the "BY_START" (= UEFI filesystem) side, the VirtioFsOpenVolume()
function -- which is the sole EFI_SIMPLE_FILE_SYSTEM_PROTOCOL member
function -- is a stub; it always returns EFI_NO_MEDIA, for now.
The "CONNECT", "DISCONNECT", and "MAP -R" UEFI Shell commands can be used
to test this patch.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The purpose of the driver is to ease file exchange (file sharing) between
the guest firmware and the virtualization host. The driver is supposed to
interoperate with QEMU's "virtiofsd" (Virtio Filesystem Daemon).
References:
- https://virtio-fs.gitlab.io/
- https://libvirt.org/kbase/virtiofs.html
VirtioFsDxe will bind virtio-fs devices, and produce
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL instances on them.
In the longer term, assuming QEMU will create "bootorder" fw_cfg file
entries for virtio-fs devices, booting guest OSes from host-side
directories should become possible (dependent on the matching
QemuBootOrderLib enhancement).
Add the skeleton of the driver. Install EFI_DRIVER_BINDING_PROTOCOL with
stub member functions. Install EFI_COMPONENT_NAME2_PROTOCOL with final
member functions. This suffices for the DRIVERS command in the UEFI Shell
to list the driver with a human-readable name.
The file permission model is described immediately in the INF file as a
comment block, for future reference.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3097
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201216211125.19496-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
EfiTimeToEpoch() calls EfiGetEpochDays() internally, which (reasonably)
returns a UINTN. But then EfiTimeToEpoch() truncates the EfiGetEpochDays()
retval to UINT32 for no good reason, effectively restricting Time->Year
under 2106.
This truncation was pointed out with a valid warning (= build error) by
VS2019.
Allow EfiTimeToEpoch() to return / propagate a UINTN value.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201221113657.6779-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
In preparation for changing EfiTimeToEpoch()'s return type to UINTN, cast
EfiTimeToEpoch()'s retval to UINT32 explicitly, in LibSetTime().
Currently, this is a no-op, and even after widening the retval, it will
make no difference, as LibSetTime() explicitly restricts Time->Year under
2106, given that "the PL031 is a 32-bit counter counting seconds". The
patch is made for preventing compiler warnings.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201221113657.6779-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
"vm_image: 'ubuntu-latest'" now refers to Ubuntu Focal (20.04LTS), not
Ubuntu Bionic (18.04LTS), according to
<https://github.com/actions/virtual-environments/issues/1816>.
In Focal, an EmulatorPkg linking step fails like this:
> INFO - "gcc" -o
> /home/vsts/work/1/s/Build/EmulatorIA32/DEBUG_GCC5/IA32/Host -m32
> -L/usr/X11R6/lib
> -Wl,--start-group,@/home/vsts/work/1/s/Build/EmulatorIA32/DEBUG_GCC5/IA32/EmulatorPkg/Unix/Host/Host/OUTPUT/static_library_files.lst,--end-group
> -lpthread -ldl -lXext -lX11
> INFO - /usr/bin/ld: skipping incompatible
> /usr/lib/gcc/x86_64-linux-gnu/9/libgcc.a when searching for -lgcc
> INFO - /usr/bin/ld: cannot find -lgcc
> INFO - /usr/bin/ld: skipping incompatible
> /usr/lib/gcc/x86_64-linux-gnu/9/libgcc.a when searching for -lgcc
> INFO - /usr/bin/ld: cannot find -lgcc
> INFO - collect2: error: ld returned 1 exit status
> INFO - make: *** [GNUmakefile:421:
> /home/vsts/work/1/s/Build/EmulatorIA32/DEBUG_GCC5/IA32/EmulatorPkg/Unix/Host/Host/DEBUG/Host]
> Error 1
So for now, stick with the previous Ubuntu environment, which continues to
be supported, per
<https://github.com/actions/virtual-environments/issues/1816>.
The following ticket has been opened about this particular issue:
<https://github.com/actions/virtual-environments/issues/2324>.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Message-Id: <20201221031930.1799-1-bob.c.feng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: update the commit message to refer to GCC rather than
to QEMU]
https://bugzilla.tianocore.org/show_bug.cgi?id=3114
Add logic to flush all UART transmit buffers if there is a
config change from Reset(), SetAttributes() or SetControl().
Use a timeout in the flush operation, so the system can
continue to boot if the transmit buffers can not be
flushed for any reason.
This change prevents lost characters on serial debug logs
and serial consoles when a config change is made. It also
prevents a UART from getting into a bad state or reporting
error status due to characters being transmitted at the same
time registers are updated with new communications settings.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
When Affinity Routing enabled, the GICR_IPRIORITYR<n> is used to set
priority for SGIs and PPIs instead of GICD_IPRIORITYR<n>.
This patch calls ArmGicSetInterruptPriority() helper function when
setting priority to handle the difference.
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
According to ARM IHI 0069F, section 11.9.18 GICD_IPRIORITYR<n>,
Interrupt Priority Registers, n = 0 - 254, when affinity routing is
enabled for the Security state of an interrupt, GICR_IPRIORITYR<n>
is used instead of GICD_IPRIORITYR<n> where n = 0 to 7 (that is, for
SGIs and PPIs).
As setting interrupt priority for SGIs and PPIs are handled using
difference registers depends on the mode, this patch instroduces
ArmGicSetInterruptPriority() helper function to handle the discrepancy.
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
ArmReadIdPfr0 () and ArmReadIdPfr1 () are now used only inside ArmLib.
Remove the prototypes from the public header to discourage new id
register accessor additions, and direct id register access in general.
Move them into local header Arm/ArmV7Lib.h.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
ArmReadIdPfr0 is now used only inside ArmLib. Rename the AArch64
variant ArmReadIdAA64Pfr0 and add a declaration of that only into
local header AArch64/AArch64Lib.h.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The AArch64 version of ArmReadIdPfr1 is not used by any code in tree,
or in edk2-platforms. Delete it.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Create a helper function to eliminate direct feature register reading.
Returns BOOLEAN True if the CPU implements the Security extensions,
otherwise returns BOOL False.
This function is only implemented for ARM, not AArch64.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The ID register access was the only difference between them, so
after switching to the ArmHasGicSystemRegisters () helper, there
is no longer any need to have separate ARM/AArch64 source files
for ArmGicArchSecLib, so unify them and drop the subdirectories.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The ID register access was the only difference between them, so
after switching to the ArmHasGicSystemRegisters () helper, there
is no longer any need to have separate ARM/AArch64 source files
for ArmGicArchLib, so unify them and drop the subdirectories.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Create a helper function to eliminate direct feature register reading,
which gets messy in code shared between ARM/AArch64.
Returns BOOLEAN True if the CPU implements the GIC System Register
Interface (any version), otherwise returns BOOL False.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes an issue with the current programming of the i440fx
PCI Interrupt routing assignment.
Explanation by Laszlo Ersek:
(1) The rotating pattern is a map:
(slot, function) --> (interrupt link) [LNKA..LNKD]
(more precisely, it is a pattern from (slot, pin) to (interrupt link),
but function<->pin is an identity mapping in the QEMU hardware, so we
can just use (slot, function) rather than (slot, pin) on the left hand
side. But I digress.)
The ACPI _PRT object is generated by QEMU; it describes this map.
(2) Another map is
(interrupt link) --> { set of possible interrupt numbers,
for this link }
This map is given by the LNK[A..D] ACPI objects, also given by QEMU.
(3) What the firmware is expected to do is:
(3a) for each interrupt link, select an *actual* interrupt from the set
that's possible for that link, yielding a deterministic map
(interrupt link) --> (actual interrupt number)
and
(3b) for each PCI device/function with an interrupt pin, resolve the
(slot, function) --> (interrupt link) --> (actual interrupt number)
functional composition, and program the result into the Interrupt Line
register of the device.
In OVMF, we do not parse the rotating map described under (1) from
QEMU's _PRT object. Instead, we duplicate the code. This is not a
problem.
In OVMF, we also do not parse the map described under (2) from QEMU's
ACPI content. Instead, we pick a specific selection (3a) that we
"apriori" know satisfies (2). This is also not a problem. OVMF's
particular selection is the PciHostIrqs table.
(
Table (2) from QEMU is
LNKA -> { 5, 10, 11 }
LNKB -> { 5, 10, 11 }
LNKC -> { 5, 10, 11 }
LNKD -> { 5, 10, 11 }
and our specific pick in OVMF, in the PciHostIrqs table, is
LNKA -> 10
LNKB -> 10
LNKC -> 11
LNKD -> 11
)
In OVMF, we also cover step (3b), in the SetPciIntLine() function.
What's missing in OVMF -- and what this patch corrects -- is that we
currently fail to program our selection for table (3) into the hardware.
We pick a specific LNKx->IRQ# mapping for each interrupt link, and we
correctly program the PCI Interrupt Line registers through those
link-to-IRQ mappings -- but we don't tell the hardware about the
link-to-IRQ mappings. More precisely, we program such a link-to-IRQ
mapping table into the hardware that is then not matched by the mapping
we use for programming the PCI device/function interrupt lines. As a
result, some PCI Interrupt Line registers will have impossible values --
a given (slot, function) may use a particular link, but also report an
interrupt number that was never picked for that link.
Output of Linux PCI Interrupt Links for i440fx before the patch:
[ 0.327305] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 *11)
[ 0.327944] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[ 0.328582] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10 11)
[ 0.329208] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *10 11)
[ 0.329807] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
after the patch:
[ 0.327292] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.327934] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.328564] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.329195] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.329785] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
Output of Linux PCI Interrupt Links for q35 before the patch:
[ 0.307474] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.308027] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.308764] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.309310] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.309853] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.310508] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.311051] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.311589] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
after the patch:
[ 0.301991] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.302833] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.303354] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.303873] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.304399] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11)
[ 0.304918] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11)
[ 0.305436] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11)
[ 0.305954] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11)
Signed-off-by: Hendrik Borghorst <hborghor@amazon.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <8dbedc4c7a1c3fd390aca915270814e3b35e13a5.camel@amazon.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
It is anticipated that this part of the code will work for both Intel
TDX and AMD SEV, so remove the SEV specific naming and change to
ConfidentialComputing as a more architecture neutral prefix. Apart
from the symbol rename, there are no code changes.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Message-Id: <20201216014146.2229-3-jejb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Although the SEV secret location must always be below 4GB, the same is
not necessarily true for Intel TDX, so change the configuration table
to contain a pair of UINT64 parameters instead of UINT32 so that any X64
location can be represented.
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Message-Id: <20201216014146.2229-2-jejb@linux.ibm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Currently VFR files have variables comments which will not be
added into StructurePcd.dsc file. Thus, it is not convenient for
developer to Modify Pcds. To solve this problem, The comments will
be modified to user friendly format and added after the corresponding
Pcd values in StructurePcd.dsc file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3111
The VariableLock shim currently fails if called twice because the
underlying Variable Policy engine returns an error if a policy is set
on an existing variable.
This breaks existing code which expect it to silently pass if a variable
is locked multiple times (because it should "be locked").
Refactor the shim to confirm that the variable is indeed locked and then
change the error to EFI_SUCCESS and generate a DEBUG_ERROR message so
the duplicate lock can be reported in a debug log and removed.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This is used to package up the grub bootloader into a firmware volume
where it can be executed as a shell like the UEFI Shell. Grub itself
is built as a minimal entity into a Fv and then added as a boot
option. By default the UEFI shell isn't built but for debugging
purposes it can be enabled and will then be presented as a boot option
(This should never be allowed for secure boot in an external data
centre but may be useful for local debugging). Finally all other boot
options except grub and possibly the shell are stripped and the boot
timeout forced to 0 so the system will not enter a setup menu and will
only boot to grub. This is done by copying the
Library/PlatformBootManagerLib into Library/PlatformBootManagerLibGrub
and then customizing it.
Boot failure is fatal to try to prevent secret theft.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3077
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Message-Id: <20201130202819.3910-4-jejb@linux.ibm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
[lersek@redhat.com: replace local variable initialization with assignment]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: squash 'OvmfPkg: add "gGrubFileGuid=Grub" to
GuidCheck.IgnoreDuplicates', reviewed stand-alone by Phil (msgid
<e6eae551-8563-ccfb-5547-7a97da6d46e5@redhat.com>) and Ard (msgid
<10aeda37-def6-d9a4-6e02-4c66c1492f57@arm.com>)]
CpuInfo.First stores whether the current thread belongs to the first
package in the platform, first core in a package, first thread in a
core.
But the time complexity of original algorithm to calculate the
CpuInfo.First is O (n) * O (p) * O (c).
n: number of processors
p: number of packages
c: number of cores per package
The patch trades time with space by storing the first package, first
core per package, first thread per core in an array.
The time complexity becomes O (n).
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Yun Lou <yun.lou@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
The required buffer size for InitOrder will be 96K when NumberOfCpus=1024.
sizeof (CPU_FEATURES_INIT_ORDER) = 96
NumberOfCpus = 1024 = 1K
sizeof (CPU_FEATURES_INIT_ORDER) * NumberOfCpus = 96K
AllocateZeroPool() will call to PeiServicesAllocatePool() which will use
EFI_HOB_MEMORY_POOL to management memory pool.
EFI_HOB_MEMORY_POOL.Header.HobLength is UINT16 type, so there is no way
for AllocateZeroPool() to allocate > 64K memory.
So AllocateZeroPool() could not be used anymore for the case above or
even bigger required buffer size.
This patch updates the code to use AllocatePages() instead of
AllocateZeroPool() to allocate buffer for InitOrder.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Bugzilla: 3047 (https://bugzilla.tianocore.org/show_bug.cgi?id=3047)
Create a new parser for the PCCT Table.
The PCCT Table is used to describe how the OSPM can
communicate with entities outside the platform. It
describes which memory spaces correspond to which
entity as well as a few of the needed information
to handle the communications.
This new PCCT parser dumps the values and names of
the table fields. It also performs some validation
on the table's fields.
Signed-off-by: Marc Moisson-Franckhauser <marc.moisson-franckhauser@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Bugzilla: 3046 (https://bugzilla.tianocore.org/show_bug.cgi?id=3046)
The field validator function provides means to validate fields
in the ACPI table structures. To print complex field types a
print formatter function is provided.
The field validator was being invoked for simple data fields
for which the default print format is used. However, the field
validator function was not invoked if a print formatter function
was provided.
This problem is noticed when a Generic Address Structure (GAS)
is printed using DumpGas() and a field validator is present
to validate the GAS structure.
To fix this move the invocation of the field validator after
the field is printed such that the validation function is
called even when a print formatter function is present.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
"FirmwareVersion" was misspelled "FirwareVersion".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
In SmBios.h, the SMBIOS_TABLE_TYPE4 field "ProcessorManufacture"
should be "ProcessorManufacturer".
Also, update SmbiosView PrintInfo.c to use the new field name.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The edk2 CI runs the "cspell" spell checker tool. Some words
are not recognized by the tool, triggering errors.
This patch modifies some spelling/wording detected by cspell.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Only capital letters are allowed to be used for #define
declarations
The "SerialPrint" macro is definied for the PrePi module
residing in the ArmPlatformPkg. It is never used in the module.
The macro is thus removed.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no unnecessary inclusion of library
classes in the INF file
This comes with the additional information:
"The Library Class [TimeBaseLib] is not used
in any platform"
"The Library Class [PL011UartClockLib] is not used
in any platform"
"The Library Class [PL011UartLib] is not used
in any platform"
Indeed, the PL011SerialPortLib module requires the
PL011UartClockLib and PL011UartLib libraries.
The PL031RealTimeClockLib module requires the TimeBaseLib
library.
ArmPlatformPkg/ArmPlatformPkg.dsc builds the two modules,
but doesn't build the required libraries. This patch adds
the missing libraries to the [LibraryClasses.common] section.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source file
[ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805Watchdog.h]
is existing in module directory but it is not described
in INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source file
[ArmPlatformPkg/Drivers/PL061GpioDxe/PL061Gpio.h]
is existing in module directory but it is not described
in INF file.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
No used module files found
The source file
[ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/LcdGraphicsOutputDxe.h]
is existing in module directory but it is not described
in INF file.
Files in [Sources.common] are also alphabetically re-ordered.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Module file has FILE_GUID collision with other
module file
The two .inf files with clashing GUID are:
edk2\ArmPlatformPkg\PrePeiCore\PrePeiCoreMPCore.inf
edk2\ArmPlatformPkg\Library\LcdPlatformNullLib\LcdPlatformNullLib.inf
The PrePeiCoreMPCore module has been imported in 2011 and the
LcdPlatformNullLib module has been created in 2017. The
PrePeiCoreMPCore has the precedence.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Module file has FILE_GUID collision with other
module file
The two .inf files with clashing GUID are:
edk2\ArmPlatformPkg\PrePi\PeiUniCore.inf
edk2\ArmPlatformPkg\PrePi\PeiMPCore.inf
Both files seem to have been imported from the previous
svn repository as the same time.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
There should be no initialization of a variable as
part of its declaration
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Non-Boolean comparisons should use a compare operator
(==, !=, >, < >=, <=)
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
This patch fixes the following Ecc reported error:
Boolean values and variable type BOOLEAN should not use
explicit comparisons to TRUE or FALSE
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
As shift = (OpCode >> 5) & 0x3, shift will never be larger than 0x3,
so the comparison between shift and 0x12 will always be false. The right
shift type of ASR is 0x2.
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
If "Info" is a valid pointer to an EFI_FILE_SYSTEM_VOLUME_LABEL
structure, then "Info->VolumeLabel" denotes a valid array object.
When the "Info->VolumeLabel" expression is evaluated, as seen in
the LibFindFileSystem(), it is implicitly converted to
(&Info->VolumeLabel[0]). Because the object described by the
expression (Info->VolumeLabel[0]) is a valid CHAR16 object, its
address can never compare equal to NULL. Therefore, the condition
(Info->VolumeLabel == NULL) will always evaluate to FALSE.
Substitute the constant FALSE into the "if" statement, and
simplify the resultant code (eliminate the dead branch).
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's code assumes every core contains the same number of threads.
It's not always TRUE for certain model.
Such assumption causes system hang when thread count per core
is different and there is core or package dependency between CPU
features (using CPU_FEATURE_CORE_BEFORE/AFTER,
CPU_FEATURE_PACKAGE_BEFORE/AFTER).
The change removes such assumption by calculating the actual thread
count per package and per core.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Yun Lou <yun.lou@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2917
Add NETWORK_HTTP_ENABLE macro and separate HttpDxe
and HttpUtilitiesDxe drivers from
HTTP_NETWORK_HTTP_BOOT_ENABLE macro.
Current NETWORK_HTTP_BOOT_ENABLE macro is defined to enable HTTP
boot feature in POST, this macro is not only enabling HTTP Boot
related modules but also enabling other generic HTTP modules
such as HttpDxe, HttpUtilitiesDxe and DnsDxe.
These HTTP base drivers would not be only used by HTTP boot
when we introduce the use case of Redfish implementation over
HTTP to edk2.
We should have a dedicate macro to enable generic HTTP functions
on Network stack and additionally provide NETWORK_HTTP_BOOT_ENABLE
for HTTP boot functionality for the use case that platform doesn't
require HTTP boot.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3100
It is not necessary to have a PEI phase in the UEFI payload since no
specific PEI task is required. This patch adds a UefiPayloadEntry
driver to get UEFI Payload required information from the bootloaders,
convert them into a HOB list, load DXE core and transfer control to it.
Here is the change details:
1) Removed PEI phase, including Peicore, BlSupportPei, SecCore, etc.
2) Added UefiPayloadEntry driver. this is the only driver before DXE core.
3) Added Pure X64 support, dropped Pure IA32 (Could add later if required)
64bit payload with 32bit entry point is still supported.
4) Use one DSC file UefiPayloadPkg.dsc to support X64 and IA32X64 build.
Removed UefiPayloadIa32.dsc and UefiPayloadIa32X64.dsc
Tested with SBL and coreboot on QEMU.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Currently, only parts of the Header files can be collected which
caused some struct definition can not be found. To solve this issue,
Header files full collection has been added in this file to support
the struct finding.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Copy UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm to
OvmfPkg/Bhyve/ResetVector/Ia16, with one change, as has also been
made in XenResetVector:
- SEC_DEFAULT_CR0: enable cache (bit 30 or CD set to 0)
With the CD bit set to 1, this has the downside on AMD systems of
actually running with the cache disabled, which slows the entire system
to a crawl.
There's no need for this bit to be set in virtualized
environments.
This patch reapplies the change from the freebsd uefi-edk2 repo at
08c00f4e8d
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Peter Grehan <grehan@freebsd.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201124005733.18107-4-rebecca@bsdio.com>
The current variable policy is allocated by AllocatePool(), which is
boot time only. This means that if you do any variable setting in the
runtime, the policy has been freed. Ordinarily this isn't detected
because freed memory is still there, but when you boot the Linux
kernel, it's been remapped so the actual memory no longer exists in
the memory map causing a page fault.
Fix this by making it AllocateRuntimePool(). For SMM drivers, the
platform DSC is responsible for resolving the MemoryAllocationLib
class to the SmmMemoryAllocationLib instance. In the
SmmMemoryAllocationLib instance, AllocatePool() and
AllocateRuntimePool() are implemented identically. Therefore this
change is a no-op when the RegisterVariablePolicy() function is built
into an SMM driver. The fix affects runtime DXE drivers only.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3092
Signed-off-by: James Bottomley <jejb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The LzmaUefiDecompressGetInfo() function
[MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaDecompress.c] currently
silently truncates the UINT64 "DecodedSize" property of the compressed
blob to the UINT32 "DestinationSize" output parameter.
If "DecodedSize" is 0x1_0000_0100, for example, then the subsequent memory
allocation (for decompression) will likely succeed (allocating 0x100 bytes
only), but then the LzmaUefiDecompress() function (which re-fetches the
uncompressed buffer size from the same LZMA header into a "SizeT"
variable) will overwrite the buffer.
Catch (DecodedSize > MAX_UINT32) in LzmaUefiDecompressGetInfo() at once.
This should not be a practical limitation. (The issue cannot be fixed for
32-bit systems without spec modifications anyway, given that the
"OutputSize" output parameter of
EFI_GUIDED_SECTION_EXTRACTION_PROTOCOL.ExtractSection() has type UINTN,
not UINT64.)
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1816
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201119115034.12897-2-lersek@redhat.com>
The DXE Core sets up a protocol notify function in its entry point, for
instances of the Firmware Volume Block2 Protocol:
DxeMain() [DxeMain/DxeMain.c]
FwVolDriverInit() [FwVol/FwVol.c]
Assume that a 3rd party UEFI driver or application installs an FVB
instance, with crafted contents. The notification function runs:
NotifyFwVolBlock() [FwVol/FwVol.c]
installing an instance of the Firmware Volume 2 Protocol on the handle.
(Alternatively, assume that a 3rd party application calls
gDS->ProcessFirmwareVolume(), which may also produce a Firmware Volume 2
Protocol instance.)
The EFI_FIRMWARE_VOLUME2_PROTOCOL.ReadSection() member performs "a
depth-first, left-to-right search algorithm through all sections found in
the specified file" (quoting the PI spec), as follows:
FvReadFileSection() [FwVol/FwVolRead.c]
GetSection() [SectionExtraction/CoreSectionExtraction.c]
FindChildNode() [SectionExtraction/CoreSectionExtraction.c]
FindChildNode() // recursive call
FindChildNode() is called recursively for encapsulation sections.
Currently this recursion is not limited. Introduce a new PCD
(fixed-at-build, or patchable-in-module), and make FindChildNode() track
the section nesting depth against that PCD.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1743
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201119105340.16225-3-lersek@redhat.com>
FindChildNode() has two callers: GetSection(), and FindChildNode() itself.
- At the GetSection() call site, a positive (i.e., nonzero)
SectionInstance is passed. This is because GetSection() takes a
zero-based (UINTN) SectionInstance, and then passes
Instance=(SectionInstance+1) to FindChildNode().
- For reaching the recursive FindChildNode() call site, a section type
mismatch, or a section instance mismatch, is necessary. This means,
respectively, that SectionInstance will either not have been decreased,
or not to zero anyway, at the recursive FindChildNode() call site.
Add two ASSERT()s to FindChildNode(), for expressing the (SectionSize>0)
invariant.
In turn, the invariant provides the explanation why, after the recursive
call, a zero SectionInstance implies success. Capture it in a comment.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201119105340.16225-2-lersek@redhat.com>
When trying to get page table base, if mInternalCr3 is zero, it will use
the page table from CR3, and reflect the page table depth by CR4 LA57 bit.
If mInternalCr3 is non zero, it will use the page table from mInternalCr3
and reflect the page table depth of mInternalCr3 at same time.
In the case of X64, we use m5LevelPagingNeeded to reflect the depth of
the page table. And in the case of IA32, it will not the page table depth
information.
This patch is a bug fix when enable CET feature with 5 level paging.
The SMM page tables are allocated / initialized in PiCpuSmmEntry().
When CET is enabled, PiCpuSmmEntry() must further modify the attribute of
shadow stack pages. This page table is not set to CR3 in PiCpuSmmEntry().
So the page table base address is set to mInternalCr3 for modifty the
page table attribute. It could not use CR4 LA57 bit to reflect the
page table depth for mInternalCr3.
So we create a architecture-specific implementation GetPageTable() with
2 output parameters. One parameter is used to output the page table
address. Another parameter is used to reflect if it is 5 level paging
or not.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3015
Signed-off-by: Sheng Wei <w.sheng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3003
There is a plan to make MD5 disable as default.
The new MACRO ENABLE_MD5_DEPRECATED_INTERFACES
would be introduced to enable MD5. Make the
definition ahead of the change to avoid build
error after the MACRO changed.
1. Add the NetworkBuildOptions.dsc.inc to define
the MACRO for build (support: GCC, INTEL, MSFT and
RVCT)
2. Add the BuildOption file to Network.dsc.inc
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Message-Id: <20201112055558.2348-5-zhichao.gao@intel.com>
[lersek@redhat.com: clean up comments in "NetworkBuildOptions.dsc.inc"]
[lersek@redhat.com: hoist "BuildOptions" above "Components" in
"Network.dsc.inc" for bug compat with edk2-platforms]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=3074
* Fix offset of LinkLayerControlAndStatus in the
CXL_1_1_LINK_CAPABILITY_STRUCTURE structure
* Fix offset of LinkLayerAckTimerControl in the
CXL_1_1_LINK_CAPABILITY_STRUCTURE structure
* Fix offset of LinkLayerDefeature in
the CXL_1_1_LINK_CAPABILITY_STRUCTURE structure
* Add CXL_11_SIZE_ASSERT() macro to verify the size of
a register layout structure at compile time and use
it to verify the sizes of the CXL 1.1 register structures.
* Add CXL_11_OFFSET_ASSERT() macro to verify the offset of
fields in a register layout structure at compiler time and
use it to verify the offset of fields in CXL 1.1
register structures.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Ashraf Javeed <ashraf.javeed@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Ashraf Javeed <ashraf.javeed@intel.com>
Current FSP rebasing script SplitFspBin.py has support for both
PE32 and PE32+ image formats. However, while updating the ImageBase
field in the image header, it always assumed the ImageBase field is
32bit long. Since PE32+ image format defined ImageBase as 64bit,
the current script will only update the lower 32bit value and leave
the upper 32bit untouched. It does not work well for PE32+ image
that requires update in the upper 32bit ImageBase field. The
expected behavior is to update the full 64bit field. This patch
implemented this fix.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2946
This is the regression issue in BaseTools BrotliCompress after Brotli
is changed to submodule. BrotliCompress should store the source size
and scratch buffer size into the header of the compressed binary data.
But now, BrotliCompress doesn't store them. So, BrotliDecompress
can't work.
To fix this issue, BrotliCompress tool main() function should be provided.
It needs to support the options of -e, -d, -o file, -g gap, -q level.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The Raspberry Pi platform with Secure Boot enabled currently fails to build
with error:
Module type [DXE_RUNTIME_DRIVER] is not supported by library instance
[/home/appveyor/projects/rpi4/edk2/MdePkg/Library/DxeRngLib/DxeRngLib.inf]
Add the missing class to fix this issue.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
- Include Redfish.dsc.inc in RedfishPkg.dsc. which
consolidates the necessary components in Redfish.dsc.inc.
- Remove unnecessary library instances from RedfishPkg.dsc.
- Add build option in RedfishPkg.yaml.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Cc: Peter O'Hanley <peter.ohanley@hpe.com>
Reviewed-by: Nickle Wang <nickle.wang@hpe.com>
This simplify ATA driver debugging all ATA packets will be printed to
debug port on DEBUG_VERBOSE level along with the packet execution
status. Additionally failed packets and the failed packet execution
status will be printed on DEBUG_ERROR level.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3026
This commit adds code to restart the ATA packets that failed due to the
CRC error or other link condition. For sync transfers the code will try
to get the command working for up to 5 times. For async transfers, the
command will be retried until the timeout value timeout specified by the
requester is reached. For sync case the count of 5 retries has been
chosen arbitrarily and if needed can be increased or decreased.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3024
AHCI driver used to poll D2H register type to determine whether the FIS
has been received. This caused a problem of long timeouts when the link
got a CRC error and the FIS never arrives. To fix this this change
switches AHCI driver to poll the IS register which will signal both the
reception of FIS and the occurrence of error.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
The QemuFlashPtrWrite() flash services runtime uses the GHCB and VmgExit()
directly to perform the flash write when running as an SEV-ES guest. If an
interrupt arrives between VmgInit() and VmgExit(), the Dr7 read in the
interrupt handler will generate a #VC, which can overwrite information in
the GHCB that QemuFlashPtrWrite() has set. This has been seen with the
timer interrupt firing and the CpuExceptionHandlerLib library code,
UefiCpuPkg/Library/CpuExceptionHandlerLib/X64/
Xcode5ExceptionHandlerAsm.nasm and
ExceptionHandlerAsm.nasm
reading the Dr7 register while QemuFlashPtrWrite() is using the GHCB. In
general, it is necessary to protect the GHCB whenever it is used, not just
in QemuFlashPtrWrite().
Disable interrupts around the usage of the GHCB by modifying the VmgInit()
and VmgDone() interfaces:
- VmgInit() will take an extra parameter that is a pointer to a BOOLEAN
that will hold the interrupt state at the time of invocation. VmgInit()
will get and save this interrupt state before updating the GHCB.
- VmgDone() will take an extra parameter that is used to indicate whether
interrupts are to be (re)enabled. Before exiting, VmgDone() will enable
interrupts if that is requested.
Fixes: 437eb3f7a8
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Acked-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c326a4fd78253f784b42eb317589176cf7d8592a.1604685192.git.thomas.lendacky@amd.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3008
In upcoming patches, the setting of the bits in the GHCB ValidBitmap will
be performed in multiple places. In order to reduce code duplication, add
an interface, VmgSetOffsetValid(), to VmgExitLib library to perform this
function. Also, to keep management of the ValidBitmap within the library,
add an inteface, VmgIsOffsetValid(), to return whether the bit in the
ValidBitmap is set for a specified offset.
The new VmgSetOffsetValid() function is a VOID function and will be an
empty function in the VmgExitLibNull implementation of the VmgExitLib
library.
The new VmgIsOffsetValid() function returns a BOOLEAN to indicate if the
offset is valid. This will always return FALSE in the VmgExitLibNull
implementation of the VmgExitLib library.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Acked-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <0bcb2373f8c6e0171ae277d3d7c2eb284621355e.1604685192.git.thomas.lendacky@amd.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2528
Currently, CL command contains multiple C files will be compiled,
and that caused command line too long, which may trigger build error.
In order to solve this issue, the following rules is used in this scene:
If the number of C files is greater than one, a txt file will be used
to record these C files, and replaces the corresponding content in
command line with the file name.
Else (only one C file listed in the command line), the length of the
whole CL command line will determine whether use a file to record. If
the length exceeds the limited max length, use the recording file; else
C file name directly listed in the command line
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Commit 6ad819c introduced two new functions in FmpDeviceLib:
1. FmpDeviceCheckImageWithStatus ()
2. FmpDeviceSetImageWithStatus ()
These functions allow an FmpDeviceLib implementation to return a
Last Attempt Status code value within the Device Library range from
LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MIN_ERROR_CODE_VALUE to
LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MAX_ERROR_CODE_VALUE.
To maintain backward compatibility, commit 6ad819c did not update
the FmpDxe driver to invoke these functions. FmpDeviceLib instances
should update their FmpDeviceCheckImage () function to simply call
FmpDeviceCheckImageWithStatus (). Similarly, FmpDeviceSetImage ()
should simply call FmpDeviceSetImageWithStatus (). This is
demonstrated in the implementation of these functions in
FmpDevicePkg/Library/FmpDeviceLibNull/FmpDeviceLib.c. By doing so,
the library can remain compatible with FmpDxe implementations before
and after this transition.
This commit updates FmpDxe to call the WithStatus () version of
these functions enabling the Last Attempt Status code returned to
be accessible to FmpDxe.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
CoreInitializeMemoryServices() logs "BaseAddress" and "Length" with
DEBUG() before DxeMain() calls ProcessLibraryConstructorList()
explicitly. (Library construction is not an automatic part of the DXE
Core entry point.)
So those DEBUG()s in CoreInitializeMemoryServices() are issued against
an un-constructed DebugLib, and also against a -- possibly underlying --
un-constructed SerialPortLib.
Some DebugLib instances can deal with this (see for example commit
91a5b13650, "OvmfPkg/PlatformDebugLibIoPort: fix port detection for
use in the DXE Core", 2018-08-06), while some others can't (see for
example the DebugLib instance
"MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf"
coupled with the SerialPortLib instance
"ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.inf").
Addressing this issue in a SerialPortLib instance that underlies
BaseDebugLibSerialPort seems wrong; either the DebugLib instance should
cope directly with being called un-constructed (see again commit
91a5b13650), or the DXE Core should log relevant information *at
least* after library instances have been constructed. This patch
implements the latter (only for the "BaseAddress" and "Length" values
calculated by CoreInitializeMemoryServices()).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jeff Brasen <jbrasen@nvidia.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20201103161557.30621-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
On windows system, when use command chcp displays the number of the
active console code page, if the active console code is 936, run
make cleanall in the BaseTools will hang.
Issue reproduce step:
chcp 936
edksetup.bat VS2015
cd BaseTools
nmake cleanall
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Signed-off-by: Yunhua Feng <fengyunhua@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
CoreInitializeMemoryServices was not checking for any existing memory
allocation created in the HOB producer phase. If there are memory
allocations outside of the region covered by the HOB List then Gcd could
select that region for memory which can result in the memory allocation
to not be handled and memory overwrites.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
When generating compressed section, the build tool rely on the
build intermediate files, which were generated in last build, to
get the file list. This method will cause the incremental build to
generate incorrect build result. To reproduce this incremental build
error, you can do:
1. build Ovmf
2. change the module OvmfPkg\AcpiTables a source file Facp.aslc
name from Facp.aslc to Facpxxx.aslc.
3. change the Facp.aslc file name in [sources] section of AcpiTables.inf
4. incremental build Ovmf
you will see the in AcpiTables module Makefile, the corresponding
Facp.acpi file is not changed.
This patch is to make the build always get file list from the INF.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The Generic ACPI for Arm Components 1.0 Platform Design
Document, s2.6.4 "ASL code examples" provides information
to describe an Arm CoreLink CMN-600 Coherent Mesh Network
using an ASL definition block table.
The SSDT CMN-600 Table Generator uses the Configuration
Manager protocol to obtain the following information about
the CMN-600 device on the platform:
- the PERIPHBASE address location and address range;
- the ROOTNODEBASE address location;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
The CMN-600 mesh is described using the CM_ARM_CMN_600_INFO
and CM_ARM_EXTENDED_INTERRUPT structures in the Configuration
Manager.
The SSDT CMN-600 Table generator:
- gets the CMN-600 hardware information
from the configuration manager.
- uses the AmlLib interfaces to parse the AML
template BLOB and construct an AML tree.
- uses the AmlLib to update:
- the "_UID" value;
- the address location and range of the PERIPHBASE;
- the address location of the ROOTNODEBASE;
- the number of Debug and Trace Controller (DTC)
and their respective interrupt number;
- serializes the AML tree to an output buffer.
This output buffer contains the fixed-up AML code,
which is then installed as an ACPI SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
With some super-speed USB mass storage devices it has been observed
that a USB transaction error may occur when attempting the set the
device address during enumeration.
According the the xHCI specification (section 4.6.5) ...
"A USB Transaction ErrorCompletion Code for an Address Device Command
may be due to a Stall response from a device. Software should issue a
Disable Slot Commandfor the Device Slot then an Enable Slot Command
to recover from this error."
To fix this, retry the device slot initialization if it fails due to a
device error.
Change was verified using a superspeed mass storage device that was
occasionally failing to enumerate in UEFI. With this change this failure
to enumerate was resolved. This failure was also only seen in UEFI and not
in the OS.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Use a pool allocation for the RSDP ACPI root pointer structure if no
memory limit is in effect that forces us to use page based allocation,
which may be wasteful if they get rounded up to 64 KB as is the case
on AArch64.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
If no memory allocation limit is in effect for ACPI tables, prefer
pool allocations over page allocations, to avoid wasting memory on
systems where page based allocations are rounded up to 64 KB, such
as AArch64.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
On AArch64 systems, page based allocations for memory types that are
relevant to the OS are rounded up to 64 KB multiples. This wastes
some space in the ACPI table memory allocator, since it uses page
based allocations in order to be able to place the ACPI tables low
in memory.
Since the latter requirement does not exist on AArch64, switch to pool
allocations for all ACPI tables except the root tables if the active
allocation policy permits them to be anywhere in memory. The root
tables will be handled in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The ProcessorCharacteristics is a UINT16 field, so the
PROCESSOR_CHARACTERISTIC_FLAGS bitfield should be UINT16 too.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
SMBIOS 3.4.0 defines bit 9 of the Type 4 table Processor Characteristics
field to be the ARM64 SoC ID support. Add it to the
PROCESSOR_CHARACTERISTIC_FLAGS struct bitfield.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
SMBIOS 3.4.0 defines bit 9 of the Type 4 table Processor Characteristics
field to be the ARM64 SoC ID support. Add support for it to the
smbiosview command.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Fix a couple of typos in SmbiosViewStrings.uni:
"Boot form CD" should be "Boot from CD", and "plugged from the wall"
should be "plugged into the wall".
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3028
The FirmwareVolume2Protocol->GetNextFile() produced by DXE Core can be used
to search for a file based on the value of *FileType input. However, this
service will always return EFI_NOT_FOUND if the input FileType is set to
EFI_FV_FILETYPE_MM_STANDALONE or EFI_FV_FILETYPE_MM_CORE_STANDALONE, Which
means user can't use this service to search any standalone MM image in that
FV.
This patch update the FirmwareVolume2Protocol->GetNextFile() service to
support searching standalone MM module.
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
CheckTheImage() is currently used to provide the CheckImage()
implementation for the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance
produced by FmpDxe in addition to being called internally in the
SetImage() path.
Since CheckTheImage() plays a major role in determining the
validity of a given firmware image, an internal version of the
function is introduced - CheckTheImageInternal() that is capable
of returning a Last Attempt Status code to internal callers such
as SetTheImage().
The CheckImage() API as defined in the UEFI Specification for
EFI_FIRMWARE_MANAGEMENT_PROTOCOL is not impacted by this change.
CheckTheImageInternal() contains unique Last Attempt Status codes
during error paths in the function so it is easier to identify
the issue with a particular image through the Last Attempt Status
code value.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Introduces a public and a private header file to define more
granular usage of the UEFI Specification defined unsuccessful
vendor range for Last Attempt Status codes. The unsuccessful
vendor range is described in UEFI Specification 2.8A section 23.4.
The public header file Include/LastAttemptStatus.h defines ranges
within the unsuccessful vendor range. At a high-level, the two
main ranges are defined are the FMP Reserved range and the Device
Library Reserved range.
The FMP Reserved range is reserved for usage of components within
FmpDevicePkg. PrivateInclude/FmpLastAttemptStatus.h contains
usage details and specific Last Attempt Status code definitions.
The Device Library Reserved range is reserved for usage by
FmpDeviceLib instances. Each library may define custom Last
Attempt Status codes within the bounds defined in
Include/LastAttemptStatus.h:
[LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MIN_ERROR_CODE_VALUE,
LAST_ATTEMPT_STATUS_DEVICE_LIBRARY_MAX_ERROR_CODE_VALUE]
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3007
Currently UsbDevContext is not cleaned up if USB slot initialization is
failed, the wrong context data will affect next USB devices and
the USB devices can not be enumerated.
Need to disable slot if USB slot initialization is failed.
Below test cases are passed on UpXtreme:
a. USB 3.0 thumb drives can be recognized in UEFI shell
b. SUT can boot to Puppylinux from USB3.0 mass storage,
the storage can be recognized in linux
c. Plug in a USB keyboard (hot plug) and enumeration is OK
in UEFI shell and linux
d. Plug in a USB mouse(hot plug) and enumeration is OK in linux.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Heng Luo <heng.luo@intel.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The function ArmReplaceLiveTranslationEntry () is passed as a VOID
pointer to WriteBackDataCacheRange (). This produces the following
warning on VS2019:
warning C4152: nonstandard extension, function/data pointer
conversion in expression
This change explicitly casts the argument to the formal parameter
type VOID*.
This can be reproduced with the following build command:
build -b DEBUG -a AARCH64 -t VS2019 -p ArmPkg/ArmPkg.dsc
-m ArmPkg/Library/ArmMmuLib/ArmMmuPeiLib.inf
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2835
There's several occurrences of a UINT64 or an EFI_PHYSICAL_ADDRESS
being assigned to a UINT32 value in ArmMmuLib. These result in
warning C4244 in VS2019:
warning C4244: '=': conversion from 'UINT64' to 'UINT32', possible
loss of data
warning C4244: '=': conversion from 'EFI_PHYSICAL_ADDRESS' to
'UINT32', possible loss of data
This change explicitly casts the values to UINT32.
These can be reproduced with the following build command:
build -b DEBUG -a ARM -t VS2019 -p ArmPkg/ArmPkg.dsc
-m ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Addresses BZ https://bugzilla.tianocore.org/show_bug.cgi?id=2380 where
explicit casts are required for 64 to 32 bit assignment.
We can apply a straight cast for Time->Nanosecond since we already checked
for overflow.
On the other hand, we may have a frequency that is greater than UINT32_MAX
for Capabilities->Resolution. But using the frequency for the resolution
is the wrong approach anyway, since we can't actually vouch for the actual
resolution of the virtual library. Instead, play it safe by defaulting to
1 Hz, which is what a standard PC-AT CMOS RTC device would use.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Fix the following ECC reported errors in SsdtSerialPortFixupLib.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 in Comment,
<@param [in]> does NOT have [in, out]
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change the AML_DEBUG_STR() macro to AML_OPCODE_DEF() that takes a string
and the AML OpCode as input so that the text description and the AML
OpCode are grouped. The AML_OPCODE_DEF() macro also strips the string
description for release builds.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix ECC error 8001 reported errors in AmlDbgPrint.
[8001] Only capital letters are allowed to be used
for #define declarations.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported errors in AmlLib.
- [1008] File has invalid Non-ACSII char.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 Comment does NOT
have tail **/
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported error in AcpiSratLibArm.
- [9002] The function headers should follow Doxygen special
documentation blocks in section 2.3.5 Comment does NOT
have tail **/
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Fix the following ECC reported error in SsdtSerialPortLibArm.
- [5007] There should be no initialization of a variable as part of
its declaration Variable Name.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reordered the asserts to first check if the pointer is valid
before de-referencing the pointer.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1914
AuthenticodeVerify() calls OpenSSLs d2i_PKCS7() API to parse asn encoded
signed authenticode pkcs#7 data. when this successfully returns, a type
check is done by calling PKCS7_type_is_signed() and then
Pkcs7->d.sign->contents->type is used. It is possible to construct an asn1
blob that successfully decodes and have d2i_PKCS7() return a valid pointer
and have PKCS7_type_is_signed() also return success but have Pkcs7->d.sign
be a NULL pointer.
Looking at how PKCS7_verify() [inside of OpenSSL] implements checking for
pkcs7 structs it does the following:
- call PKCS7_type_is_signed()
- call PKCS7_get_detached()
Looking into how PKCS7_get_detatched() is implemented, it checks to see if
p7->d.sign is NULL or if p7->d.sign->contents->d.ptr is NULL.
As such, the fix is to do the same as OpenSSL after calling d2i_PKCS7().
- Add call to PKS7_get_detached() to existing error handling
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
This reverts commit e0eacd7daa.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3012
The patch to fix LBA size would cause a regression that make the
partition of CD image with media type other than NO_EMULATOR unobserved.
The patch used to fix the CD image's MBR table issue. The CD MBR
table would always be ignored because it would be handled by the
Eltorito partition handler first and never go into the MBR handler.
So directly revert it.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Tested-by: Gary Lin <glin@suse.com>
The AP reset vector stack allocation is only required if running as an
SEV-ES guest. Since the reset vector allocation is below 1MB in memory,
eliminate the requirement for bare-metal systems and non SEV-ES guests
to allocate the extra stack area, which can be large if the
PcdCpuMaxLogicalProcessorNumber value is large, and also remove the
CPU_STACK_ALIGNMENT alignment.
Fixes: 7b7508ad78 ("UefiCpuPkg: Allow AP booting under SEV-ES")
Cc: Garrett Kirkendall <garrett.kirkendall@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <21345cdbc906519558202b3851257ca07b9239ba.1600884239.git.thomas.lendacky@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: supply missing space character after "PcdGet32"]
This adds a new INF for BaseCryptLib suitable for
host based environments. It adds a host based unit test for
BaseCryptLib that can also be built as a shell based Unit Test.
In addition, this also adds a UnitTestHostCrtWrapper.c file, which provides
some of the functionality not provided by the default host based unit test
system that OpenSSL expects. This is used by UnitTestHostBaseCryptLib, a
version of the BaseCryptLib meant specifically for host based unit testing.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Matthew Carlson <matthewfcarlson@gmail.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Kvmtool is a virtual machine manager that can be used
to launch guest partitions. It additionally emulates
some hardware components e.g. RTC, CFI etc. essentially
providing a virtual platform for a guest operating
system (OS) to run.
A standards-based OS would need UEFI firmware support
for the Kvmtool virtual platform, for which additional
modules are added to ArmVirtPkg.
Adding myself as reviewer for these modules as
advised on mailing list discussion at
- https://edk2.groups.io/g/devel/topic/30915279#30693
- https://edk2.groups.io/g/devel/topic/74200911#59650
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
The EDKII Core CI reports spelling error for XIPFLAGS. The
XIPFLAGS are typically used to specify XIP options to the
compiler. e.g. GCC:*_*_*_CC_XIPFLAGS = -fno-jump-tables
Add 'XIPFLAGS' to "words" section in cspell.base.yaml file
to avoid spelling check error.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool is a virtual machine manager that can be used
to launch guest VMs. Support for Kvmtool virtual
platform has been added to ArmVirtPkg.
Add kvmtool to the ArmVirtPkg dictionary to prevent
the CI Spell check plugin from failing.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool emulates a MC146818 RTC controller in the
MMIO space. To support this the MC146818 RTC driver
PcatRealTimeClockRuntimeDxe has been updated to
support MMIO accesses. PCDs for RTC Index and
Target register base addresses in the MMIO space
have been introduced. The KvmtoolRtcFdtClientLib
reads the MC146818 RTC MMIO base address region
from the Kvmtool device tree and updates the
Index and Target register PCDs.
As these PCDs are defined in PcAtChipsetPkg.dec,
this patch updates the CI script to add this
dependency.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool is a virtual machine manager that enables hosting
KVM guests. Kvmtool emulates certain devices like serial
port, RTC, etc. essentially providing a virtual platform.
This patch adds support for kvmtool virtual platform.
Following is a brief description of the firmware
implementation choices:
- Serial Port: 16550 UART
On some platforms the 16550 UART is interfaced using
PCI. Therefore, the 16550 Serial port library is
dependent on the PCI library. The 16550 UART driver
checks the Device ID represented using the PCD
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo
to determine if the UART is behind PCI.
If the Device ID is 0xFF then the serial 16550 UART
is not behind PCI.
On Kvmtool the Serial 16550 UART is not behind PCI,
and therefore a combination of BasePciLibPciExpress
and BasePciExpressLib is used to satisfy the PCI
library dependency.
The PcdSerialPciDeviceInfo is also set to 0xFF to
indicate that the Serial 16550 UART is not behind
PCI. The PCD PcdSerialUseMmio is also set to TRUE
to indicate MMIO accesses are required for the
UART registers.
Additionally two instances of PlatformHookLibs are
provided EarlyFdt16550SerialPortHookLib and
Fdt16550SerialPortHookLib to patch the
PcdSerialRegisterBase so that BaseSerialPortLib16550
and retrieve the base address of the 16550 UART.
- Dependency order for Flash
FaultTolerantWriteDxe makes use of PCDs (e.g.
PcdFlashNvStorageFtwSpareBase64 etc.), which in
case of kvmtool will be evaluated based on the CFI
flash base address read from the DT. These variables
are populated in the NorFlashPlatformLib loaded by
ArmVeNorFlashDxe.
This results in a dependency issue with
FaultTolerantWriteDxe. To resolve this make the
NorFlashPlatformLib as a library dependency for
FaultTolerantWriteDxe.
- RTC Controller
A separate patch updates the MC146818 RTC controller
driver to support MMIO accesses.
A KvmtoolRtcFdtClientLib has been introduced to
extract the base addresses of the RTC controller
from the platform device tree and map the RTC
register space as Runtime Memory.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The PlatformPeim() in the PlatformPeiLib is invoked
by the PrePiMain() and provides the platform an
opportunity to setup the plaform specific HOBs.
This PlatfromPeiLib initialises the Kvmtool platform
HOBs like the Fdt, 16550BaseAddress, etc.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The BaseSerialPort16550 library invokes the
PlatformHookSerialPortInitialize() implemented as
part of the PlatformHook library, to perform platform
specific initialization required to enable use of the
16550 device. The BaseSerialPort16550 library uses
the PcdSerialRegisterBase to obtain the base address
of the UART for MMIO operations.
Some VMMs like Kvmtool provide the base address of
the console serial port in the platform device tree.
This patch introduces two instances of the Platform
Hook library:
1. EarlyFdt16550SerialPortHookLib - parses the
platform device tree to extract the base
address of the 16550 UART and update the PCD
PcdSerialRegisterBase.
2. Fdt16550SerialPortHookLib - reads the GUID
Hob gEarly16550UartBaseAddressGuid (that caches
the base address of the 16550 UART discovered
during early stages) and updates the PCD
PcdSerialRegisterBase.
Note:
a. The PCD PcdSerialRegisterBase is configured
as PatchableInModule.
b. A separate patch introduces a PlatformPeiLib
that trampolines the 16550 UART base address
from the Pcd PcdSerialRegisterBase to the
GUID Hob gEarly16550UartBaseAddressGuid.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Introduce a new GUID Hob gEarly16550UartBaseAddressGuid
to cache the base address of the 16550 UART, for when
PCD access is not available.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The BaseSerialPortLib16550 library does not implement
a constructor. This prevents the correct constructor
invocation order for dependent libraries.
e.g. A PlatformHookLib (for the Serial Port) may have
a dependency on retrieving data from a Hob. A Hob
library implementation may configure its initial state
in the HobLib constructor. Since BaseSerialPortLib16550
does not implement a constructor, the Basetools do not
resolve the correct order for constructor invocation.
To fix this, add an empty constructor to the serial port
library BaseSerialPortLib16550.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool places the base address of the CFI flash in
the device tree it passes to UEFI. This library
parses the kvmtool device tree to read the CFI base
address and initialise the PCDs use by the NOR flash
driver and the variable storage.
UEFI takes ownership of the CFI flash hardware, and
exposes its functionality through the UEFI Runtime
Variable Service. Therefore, disable the device tree
node for the CFI flash used for storing the UEFI
variables, to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Kvmtool is a virtual machine manager that enables
hosting KVM guests. Kvmtool allows to vary the
hardware configuration of the virtual platform
it provides to the guest partition. It provides
the current hardware configuration to the firmware
by handing off a device tree containing the hardware
information.
This library parses the kvmtool provided device
tree and populates the system memory map for the
kvmtool virtual platform.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Kvmtool is a virtual machine manager that enables
hosting KVM guests. It essentially provides a
virtual hardware platform for guest operating
systems.
Kvmtool hands of a device tree containing the
current hardware configuration to the firmware.
A standards-based operating system would use
ACPI to consume the platform hardware
information, while some operating systems may
prefer to use Device Tree.
The KvmtoolPlatformDxe performs the platform
actions like determining if the firmware should
expose ACPI or the Device Tree based hardware
description to the operating system.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Some virtual machine managers like kvmtool can relocate
the devices in the system memory map. The information
about the devices location in memory is described in the
device tree. Therefore, the CFI memory region and the
associated Non volatile storage variables need to be
adjusted accordingly.
To support such use cases the non-volatile storage
variable base PCD PcdFlashNvStorageVariableBase has
been defined as a dynamic PCD.
The NOR flash driver was using the Flash non-volatile
storage variable base PCD as a fixed PCD, thereby
preventing runtime resolution of the variable base
address.
Therefore update the NOR flash driver to load the
PCD using PcdGet32 instead of FixedPcdGet32.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Add library that parses the Kvmtool device tree and updates
the dynamic PCDs describing the RTC Memory map.
It also maps the MMIO region used by the RTC as runtime memory
so that the RTC registers are accessible post ExitBootServices.
Since UEFI takes ownership of the RTC hardware disable the RTC
node in the DT to prevent the OS from attaching its device
driver as well.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Some virtual machine managers like Kvmtool emulate the MC146818
RTC controller in the MMIO space so that architectures that do
not support I/O Mapped I/O can use the RTC. This patch adds MMIO
support to the RTC controller driver.
The PCD PcdRtcUseMmio has been added to select I/O or MMIO support.
If PcdRtcUseMmio is:
TRUE - Indicates the RTC port registers are in MMIO space.
FALSE - Indicates the RTC port registers are in I/O space.
Default is I/O space.
Additionally two new PCDs PcdRtcIndexRegister64 and
PcdRtcTargetRegister64 have been introduced to provide the base
address for the RTC registers in the MMIO space.
When MMIO support is selected (PcdRtcUseMmio == TRUE) the driver
converts the pointers to the RTC MMIO registers so that the
RTC registers are accessible post ExitBootServices.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
The current SSE2 implementation of the ZeroMem(), SetMem(),
SetMem16(), SetMem32 and SetMem64 functions is writing 16 bytes per 16
bytes. It hurts the performances so bad that this is even slower than
a simple 'rep stos' (4% slower) in regular DRAM.
To take full advantages of the 'movntdq' instruction it is better to
"queue" a total of 64 bytes in the write combining buffers. This
patch implement such a change. Below is a table where I measured
(with 'rdtsc') the time to write an entire 100MB RAM buffer. These
functions operate almost two times faster.
| Function | Arch | Untouched | 64 bytes | Result |
|----------+------+-----------+----------+--------|
| ZeroMem | Ia32 | 17765947 | 9136062 | 1.945x |
| ZeroMem | X64 | 17525170 | 9233391 | 1.898x |
| SetMem | Ia32 | 17522291 | 9137272 | 1.918x |
| SetMem | X64 | 17949261 | 9176978 | 1.956x |
| SetMem16 | Ia32 | 18219673 | 9372062 | 1.944x |
| SetMem16 | X64 | 17523331 | 9275184 | 1.889x |
| SetMem32 | Ia32 | 18495036 | 9273053 | 1.994x |
| SetMem32 | X64 | 17368864 | 9285885 | 1.870x |
| SetMem64 | Ia32 | 18564473 | 9241362 | 2.009x |
| SetMem64 | X64 | 17506951 | 9280148 | 1.886x |
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Correct the memory offsets used in REG_ONE/REG_PAIR macros to
synchronize them with definition of the BASE_LIBRARY_JUMP_BUFFER
structure on AArch64.
The REG_ONE macro declares only a single 64-bit register be
read/written; however, the subsequent offset is 16 bytes larger,
creating an unused memory gap in the middle of the structure and
causing SetJump/LongJump functions to read/write 8 bytes of memory
past the end of the jump buffer struct.
Signed-off-by: Jan Bobek <jbobek@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Liming Gao <gaoliming@byosoft.com.cn>
Update function behavior to not modify the incoming string that is
marked as CONST in the prototype.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2881
Currently, the build tool try to read the section alignment
from efi file if the section alignment type is Auto.
If there is no efi generated, the section alignment will
be set to zero. This behavior causes the Makefile to be different
between the full build and the incremental build.
Since the Genffs can auto get the section alignment from
efi file during Genffs procedure, the build tool can just set section
alignment as zero. This change can make the autogen makefile
consistent for the full build and the incremental build.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2978
If a module add a new PCD, the pcd token number will be
reassigned. The new Pcd token number should be updated
to all module's autogen files. CanSkip can only detect a
single module's change but not others. CanSkip block the
pcd token number update in incremental build, so this
patch is going to remove this call.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Yuwei Chen<yuwei.chen@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2880
Currently, When doing the Incremental build, the directory
macros extended to absolute path in output Makefile, which
is inconsistent with the output of Clean build.
When we do macro replacement, we can't replace macro due to
inconsistent path case, which results in inconsistent display
of incremental build and clean build in makefile.Therefore,
the path is converted to achieve the correct macro replacement.
Signed-off-by: Mingyue Liang <mingyuex.liang@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2947
When calculating memory regions and store the information in the
gSystemMemory in file WinHost.c, the code below will cause overflow,
because _wtoi (MemorySizeStr) return an int value and SIZE_1MB is
also an int value, if MemorySizeStr is lager for example 2048, then
result of multiplication will overflow.
for (Index = 0, Done = FALSE; !Done; Index++) {
//
// Save the size of the memory and make a Unicode filename SystemMemory00
//
gSystemMemory[Index].Size = _wtoi (MemorySizeStr) * SIZE_1MB;
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
In QEMU commit range 4abf70a661a5..69699f3055a5 (later fixed up in QEMU
commit 4318432ccd3f), Phil implemented a QEMU facility for exposing the
host-side TLS cipher suite configuration to OVMF. The purpose is to
control the permitted ciphers in the guest's UEFI HTTPS boot. This
complements the forwarding of the host-side crypto policy from the host to
the guest -- the other facet was the set of CA certificates (for which
p11-kit patches had been upstreamed, on the host side).
Mention the new command line options in "OvmfPkg/README".
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Gary Lin <glin@suse.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2852
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gary Lin <glin@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200922091827.12617-1-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
... for git-shortlog purposes.
NOTE: this patch does not introduce a cross-domain mapping; it only maps
both email addresses of Rebecca to the full name "Rebecca Cran".
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Rebecca Cran <rebecca@bsdio.com>
... for git-shortlog purposes.
NOTE: this patch does not introduce a cross-domain mapping; it only maps
the name "gaoliming" in Liming's new email address to "Liming Gao" (see
the Author field on commit aad9cba85f).
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
* Recently, OpensslLib [LibraryClasses] has been changed
to include RngLib which causes the SECURE_BOOT_ENABLE
build to fail in want of RngLib
* This patch adds the RngLib for OpensslLib
Signed-off-by: Divneil Rai Wadhawan <divneil.r.wadhawan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
SECURE_BOOT_ENABLE feature flag is introduced to enable Secure Boot.
The following gets enabled with this patch:
* Secure Boot Menu in "Device Manager" for enrolling keys
* Storage space for Authenticated Variables
* Authenticated execution of 3rd party images
Signed-off-by: Divneil Rai Wadhawan <divneil.r.wadhawan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add check for NULL HostAddress in AllocateBuffer as required by UEFI
specification.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
There is a DEBUG warning printout in VirtioMmioDeviceLib if the current
device's VendorID does not match the traditional 16-bit Red Hat PCIe
vendor ID used with virtio-pci. The virtio-mmio vendor ID is 32-bit and
has no connection to the PCIe registry.
Most specifically, this causes a bunch of noise when booting an AArch64
QEMU platform, since QEMU's virtio-mmio implementation used 'QEMU' as
the vendor ID:
VirtioMmioInit: Warning:
The VendorId (0x554D4551) does not match the VirtIo VendorId (0x1AF4).
Drop the warning message.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The BaseSerialPortLib16550 does fallback to a fixed address UART defined
by PcdSerialRegisterBase and does not initialize if it is zero. Do not
assume a serial port at 0x3F8, otherwise it could cause errors during
initialization of a non-existent serial port on non legacy platforms.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
If VPD PcdNvStoreDefaultValueBuffer is used, all DynamicHii and
DynamicExHii PCD value will be generated into that VPD.
In order to generate the same VPD binary file in every build,
sort the Pcd set when generating VPD.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The following two quantities:
SecDataDir->VirtualAddress + SecDataDir->Size
SecDataDir->VirtualAddress + SecDataDir->Size - OffSet
are used multiple times in DxeImageVerificationHandler(). Introduce helper
variables for them: "SecDataDirEnd" and "SecDataDirLeft", respectively.
This saves us multiple calculations and significantly simplifies the code.
Note that all three summands above have type UINT32, therefore the new
variables are also of type UINT32.
This patch does not change behavior.
(Note that the code already handles the case when the
SecDataDir->VirtualAddress + SecDataDir->Size
UINT32 addition overflows -- namely, in that case, the certificate loop is
never entered, and the corruption check right after the loop fires.)
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Wenyi Xie <xiewenyi2@huawei.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2215
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200901091221.20948-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Min M Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The "virsh setvcpus" (plural) command may hot-plug several VCPUs in quick
succession -- it means a series of "device_add" QEMU monitor commands,
back-to-back.
If a "device_add" occurs *just after* ACPI raises the broadcast SMI, then:
- the CPU_FOREACH() loop in QEMU's ich9_apm_ctrl_changed() cannot make the
SMI pending for the new CPU -- at that time, the new CPU doesn't even
exist yet,
- OVMF will find the new CPU however (in the CPU hotplug register block),
in QemuCpuhpCollectApicIds().
As a result, when the firmware sends an INIT-SIPI-SIPI to the new CPU in
SmbaseRelocate(), expecting it to boot into SMM (due to the pending SMI),
the new CPU instead boots straight into the post-RSM (normal mode) "pen",
skipping its initial SMI handler.
The CPU halts nicely in the pen, but its SMBASE is never relocated, and
the SMRAM message exchange with the BSP falls apart -- the BSP gets stuck
in the following loop:
//
// Wait until the hot-added CPU is just about to execute RSM.
//
while (Context->AboutToLeaveSmm == 0) {
CpuPause ();
}
because the new CPU's initial SMI handler never sets the flag to nonzero.
Fix this by sending a directed SMI to the new CPU just before sending it
the INIT-SIPI-SIPI. The various scenarios are documented in the code --
the cases affected by the patch are documented under point (2).
Note that this is not considered a security patch, as for a malicious
guest OS, the issue is not exploitable -- the symptom is a hang on the
BSP, in the above-noted loop in SmbaseRelocate(). Instead, the patch fixes
behavior for a benign guest OS.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 51a6fb4118
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2929
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200826222129.25798-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The "virsh setvcpus" (plural) command may hot-plug several VCPUs in quick
succession -- it means a series of "device_add" QEMU monitor commands,
back-to-back.
If a "device_add" occurs *just before* ACPI raises the broadcast SMI,
then:
- OVMF processes the hot-added CPU well.
- However, QEMU's post-SMI ACPI loop -- which clears the pending events
for the hot-added CPUs that were collected before raising the SMI -- is
unaware of the stray CPU. Thus, the pending event is not cleared for it.
As a result of the stuck event, at the next hot-plug, OVMF tries to re-add
(relocate for the 2nd time) the already-known CPU. At that time, the AP is
already in the normal edk2 SMM busy-wait however, so it doesn't respond to
the exchange that the BSP intends to do in SmbaseRelocate(). Thus the VM
gets stuck in SMM.
(Because of the above symptom, this is not considered a security patch; it
doesn't seem exploitable by a malicious guest OS.)
In CpuHotplugMmi(), skip the supposedly hot-added CPU if it's already
known. The post-SMI ACPI loop will clear the pending event for it this
time.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: bc498ac4ca
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2929
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200826222129.25798-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
For the implementation which utilizes libfdt provided in EmbeddedPkg
however it uses strncmp function in the libfdt helper library,
libfdt_env.h should provide the macro implied with edk2 strncmp
implementation.
The example is RISC-V OpenSBI library. edk2 RISC-V port uses OpenSBI
library and incorporate with edk2 libfdt. edk2 libfdt_env.h provides
the necessary macros to build OpenSBI which uses fdt functions in edk2
environment. However, OpenSBI also has libfdt helper library that uses
strncmp function which is not defined in edk2 libfdt_env.h. This commit
addresses the build issue caused by missing strncmp macro in
libfdt_env.h.
Check below three commits for the corresponding changes on OpenSBI,
8e47649eff2845d2d2cf2cfd2fc904
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Message-Id: <20200806023421.25161-1-abner.chang@hpe.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
[lersek@redhat.com: remove stray newline between S-o-b and first Cc]
The ICH9_LPC_SMI_F_BROADCAST and ICH9_LPC_SMI_F_CPU_HOTPLUG feature flags
cause QEMU to behave as follows:
BROADCAST CPU_HOTPLUG use case / behavior
--------- ----------- ------------------------------------------------
clear clear OVMF built without SMM_REQUIRE; or very old OVMF
(from before commit a316d7ac91 / 2017-02-07).
QEMU permits CPU hotplug operations, and does
not cause the OS to inject an SMI upon hotplug.
Firmware is not expected to be aware of hotplug
events.
clear set Invalid feature set; QEMU rejects the feature
negotiation.
set clear OVMF after a316d7ac91 / 2017-02-07, built with
SMM_REQUIRE, but no support for CPU hotplug.
QEMU gracefully refuses hotplug operations.
set set OVMF after a316d7ac91 / 2017-02-07, built with
SMM_REQUIRE, and supporting CPU hotplug. QEMU
permits CPU hotplug operations, and causes the
OS to inject an SMI upon hotplug. Firmware is
expected to deal with hotplug events.
Negotiate ICH9_LPC_SMI_F_CPU_HOTPLUG -- but only if SEV is disabled, as
OvmfPkg/CpuHotplugSmm can't deal with SEV yet.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200714184305.9814-1-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
If the size of the supplied buffer in FileHandleReadLine(), module
UefiFileHandleLib.c, was not 0, but was not enough to fit in
the line, the size is increased, and then the Buffer of the new
size is zeroed. This size is always larger than the supplied buffer size,
causing supplied buffer overrun. Fix the issue by using the
supplied buffer size in ZeroMem().
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Message-Id: <20200702023113.10517-1-vladimir.olovyannikov@broadcom.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
[lersek@redhat.com: remove stray space character from subject line]
Add configuration ExceptionList and IgnoreFiles for package config
files. So users can rely on this to ignore some Ecc issues.
Besides, add submodule path in IgnoreFiles section.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Before UEFI transfers control to the OS, it must park the AP. This is
done using the AsmRelocateApLoop function to transition into 32-bit
non-paging mode. For an SEV-ES guest, a few additional things must be
done:
- AsmRelocateApLoop must be updated to support SEV-ES. This means
performing a VMGEXIT AP Reset Hold instead of an MWAIT or HLT loop.
- Since the AP must transition to real mode, a small routine is copied
to the WakeupBuffer area. Since the WakeupBuffer will be used by
the AP during OS booting, it must be placed in reserved memory.
Additionally, the AP stack must be located where it can be accessed
in real mode.
- Once the AP is in real mode it will transfer control to the
destination specified by the OS in the SEV-ES AP Jump Table. The
SEV-ES AP Jump Table address is saved by the hypervisor for the OS
using the GHCB VMGEXIT AP Jump Table exit code.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
After having transitioned from UEFI to the OS, the OS will need to boot
the APs. For an SEV-ES guest, the APs will have been parked by UEFI using
GHCB pages allocated by UEFI. The hypervisor will write to the GHCB
SW_EXITINFO2 field of the GHCB when the AP is booted. As a result, the
GHCB pages must be marked reserved so that the OS does not attempt to use
them and experience memory corruption because of the hypervisor write.
Change the GHCB allocation from the default boot services memory to
reserved memory.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A hypervisor is not allowed to update an SEV-ES guest's register state,
so when booting an SEV-ES guest AP, the hypervisor is not allowed to
set the RIP to the guest requested value. Instead an SEV-ES AP must be
re-directed from within the guest to the actual requested staring location
as specified in the INIT-SIPI-SIPI sequence.
Use the SEV-ES work area for the reset vector code that contains support
to jump to the desired RIP location after having been started. This is
required for only the very first AP reset.
This new OVMF source file, ResetVectorVtf0.asm, is used in place of the
original file through the use of the include path order set in
OvmfPkg/ResetVector/ResetVector.inf under "[BuildOptions]".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Typically, an AP is booted using the INIT-SIPI-SIPI sequence. This
sequence is intercepted by the hypervisor, which sets the AP's registers
to the values requested by the sequence. At that point, the hypervisor can
start the AP, which will then begin execution at the appropriate location.
Under SEV-ES, AP booting presents some challenges since the hypervisor is
not allowed to alter the AP's register state. In this situation, we have
to distinguish between the AP's first boot and AP's subsequent boots.
First boot:
Once the AP's register state has been defined (which is before the guest
is first booted) it cannot be altered. Should the hypervisor attempt to
alter the register state, the change would be detected by the hardware
and the VMRUN instruction would fail. Given this, the first boot for the
AP is required to begin execution with this initial register state, which
is typically the reset vector. This prevents the BSP from directing the
AP startup location through the INIT-SIPI-SIPI sequence.
To work around this, the firmware will provide a build time reserved area
that can be used as the initial IP value. The hypervisor can extract this
location value by checking for the SEV-ES reset block GUID that must be
located 48-bytes from the end of the firmware. The format of the SEV-ES
reset block area is:
0x00 - 0x01 - SEV-ES Reset IP
0x02 - 0x03 - SEV-ES Reset CS Segment Base[31:16]
0x04 - 0x05 - Size of the SEV-ES reset block
0x06 - 0x15 - SEV-ES Reset Block GUID
(00f771de-1a7e-4fcb-890e-68c77e2fb44e)
The total size is 22 bytes. Any expansion to this block must be done
by adding new values before existing values.
The hypervisor will use the IP and CS values obtained from the SEV-ES
reset block to set as the AP's initial values. The CS Segment Base
represents the upper 16 bits of the CS segment base and must be left
shifted by 16 bits to form the complete CS segment base value.
Before booting the AP for the first time, the BSP must initialize the
SEV-ES reset area. This consists of programming a FAR JMP instruction
to the contents of a memory location that is also located in the SEV-ES
reset area. The BSP must program the IP and CS values for the FAR JMP
based on values drived from the INIT-SIPI-SIPI sequence.
Subsequent boots:
Again, the hypervisor cannot alter the AP register state, so a method is
required to take the AP out of halt state and redirect it to the desired
IP location. If it is determined that the AP is running in an SEV-ES
guest, then instead of calling CpuSleep(), a VMGEXIT is issued with the
AP Reset Hold exit code (0x80000004). The hypervisor will put the AP in
a halt state, waiting for an INIT-SIPI-SIPI sequence. Once the sequence
is recognized, the hypervisor will resume the AP. At this point the AP
must transition from the current 64-bit long mode down to 16-bit real
mode and begin executing at the derived location from the INIT-SIPI-SIPI
sequence.
Another change is around the area of obtaining the (x2)APIC ID during AP
startup. During AP startup, the AP can't take a #VC exception before the
AP has established a stack. However, the AP stack is set by using the
(x2)APIC ID, which is obtained through CPUID instructions. A CPUID
instruction will cause a #VC, so a different method must be used. The
GHCB protocol supports a method to obtain CPUID information from the
hypervisor through the GHCB MSR. This method does not require a stack,
so it is used to obtain the necessary CPUID information to determine the
(x2)APIC ID.
The new 16-bit protected mode GDT entry is used in order to transition
from 64-bit long mode down to 16-bit real mode.
A new assembler routine is created that takes the AP from 64-bit long mode
to 16-bit real mode. This is located under 1MB in memory and transitions
from 64-bit long mode to 32-bit compatibility mode to 16-bit protected
mode and finally 16-bit real mode.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
When starting APs in an SMP configuration, the AP needs to know if it is
running as an SEV-ES guest in order to assign a GHCB page.
Add a field to the CPU_MP_DATA structure that will indicate if SEV-ES is
enabled. This new field is set during MP library initialization with the
PCD value PcdSevEsIsEnabled. This flag can then be used to determine if
SEV-ES is enabled.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A hypervisor is not allowed to update an SEV-ES guests register state,
so when booting an SEV-ES guest AP, the hypervisor is not allowed to
set the RIP to the guest requested value. Instead, an SEV-ES AP must be
transition from 64-bit long mode to 16-bit real mode in response to an
INIT-SIPI-SIPI sequence. This requires a 16-bit code segment descriptor.
For PEI, create this descriptor in the reset vector GDT table. For DXE,
create this descriptor from the newly reserved entry at location 0x28.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
The flash detection routine will attempt to determine how the flash
device behaves (e.g. ROM, RAM, Flash). But when SEV-ES is enabled and
the flash device behaves as a ROM device (meaning it is marked read-only
by the hypervisor), this check may result in an infinite nested page fault
because of the attempted write. Since the instruction cannot be emulated
when SEV-ES is enabled, the RIP is never advanced, resulting in repeated
nested page faults.
When SEV-ES is enabled, exit the flash detection early and assume that
the FD behaves as Flash. This will result in QemuFlashWrite() being called
to store EFI variables, which will also result in an infinite nested page
fault when the write is performed. In this case, update QemuFlashWrite()
to use the VMGEXIT MMIO write support to have the hypervisor perform the
write without having to emulate the instruction.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
An SEV-ES guest will generate a #VC exception when it encounters a
non-automatic exit (NAE) event. It is expected that the #VC exception
handler will communicate with the hypervisor using the GHCB to handle
the NAE event.
NAE events can occur during the Sec phase, so initialize exception
handling early in the OVMF Sec support.
Before establishing the exception handling, validate that the supported
version of the SEV-ES protocol in OVMF is supported by the hypervisor.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
During BSP startup, the reset vector code will issue a CPUID instruction
while in 32-bit mode. When running as an SEV-ES guest, this will trigger
a #VC exception.
Add exception handling support to the early reset vector code to catch
these exceptions. Also, since the guest is in 32-bit mode at this point,
writes to the GHCB will be encrypted and thus not able to be read by the
hypervisor, so use the GHCB CPUID request/response protocol to obtain the
requested CPUID function values and provide these to the guest.
The exception handling support is active during the SEV check and uses the
OVMF temporary RAM space for a stack. After the SEV check is complete, the
exception handling support is removed and the stack pointer cleared.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Protect the SEV-ES work area memory used by an SEV-ES guest.
Regarding the lifecycle of the SEV-ES memory area:
PcdSevEsWorkArea
(a) when and how it is initialized after first boot of the VM
If SEV-ES is enabled, the SEV-ES area is initialized during
the SEC phase [OvmfPkg/ResetVector/Ia32/PageTables64.asm].
(b) how it is protected from memory allocations during DXE
If SEV-ES is enabled, then InitializeRamRegions()
[OvmfPkg/PlatformPei/MemDetect.c] protects the ranges with either
an AcpiNVS (S3 enabled) or BootServicesData (S3 disabled) memory
allocation HOB, in PEI.
(c) how it is protected from the OS
If S3 is enabled, then (b) reserves it from the OS too.
If S3 is disabled, then the range needs no protection.
(d) how it is accessed on the S3 resume path
It is rewritten same as in (a), which is fine because (b) reserved it.
(e) how it is accessed on the warm reset path
It is rewritten same as in (a).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Reserve a fixed area of memory for SEV-ES use and set a fixed PCD,
PcdSevEsWorkAreaBase, to this value.
This area will be used by SEV-ES support for two purposes:
1. Communicating the SEV-ES status during BSP boot to SEC:
Using a byte of memory from the page, the BSP reset vector code can
communicate the SEV-ES status to SEC for use before exception
handling can be enabled in SEC. After SEC, this field is no longer
valid and the standard way of determine if SEV-ES is active should
be used.
2. Establishing an area of memory for AP boot support:
A hypervisor is not allowed to update an SEV-ES guest's register
state, so when booting an SEV-ES guest AP, the hypervisor is not
allowed to set the RIP to the guest requested value. Instead an
SEV-ES AP must be re-directed from within the guest to the actual
requested staring location as specified in the INIT-SIPI-SIPI
sequence.
Use this memory for reset vector code that can be programmed to have
the AP jump to the desired RIP location after starting the AP. This
is required for only the very first AP reset.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
The SEV support will clear the C-bit from non-RAM areas. The early GDT
lives in a non-RAM area, so when an exception occurs (like a #VC) the GDT
will be read as un-encrypted even though it is encrypted. This will result
in a failure to be able to handle the exception.
Move the GDT into RAM so it can be accessed without error when running as
an SEV-ES guest.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Allocate memory for the GHCB pages and the per-CPU variable pages during
SEV initialization for use during Pei and Dxe phases. The GHCB page(s)
must be shared pages, so clear the encryption mask from the current page
table entries. Upon successful allocation, set the GHCB PCDs (PcdGhcbBase
and PcdGhcbSize).
The per-CPU variable page needs to be unique per AP. Using the page after
the GHCB ensures that it is unique per AP. Only the GHCB page is marked as
shared, keeping the per-CPU variable page encyrpted. The same logic is
used in DXE using CreateIdentityMappingPageTables() before switching to
the DXE pagetables.
The GHCB pages (one per vCPU) will be used by the PEI and DXE #VC
exception handlers. The #VC exception handler will fill in the necessary
fields of the GHCB and exit to the hypervisor using the VMGEXIT
instruction. The hypervisor then accesses the GHCB associated with the
vCPU in order to perform the requested function.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Protect the memory used by an SEV-ES guest when S3 is supported. This
includes the page table used to break down the 2MB page that contains
the GHCB so that it can be marked un-encrypted, as well as the GHCB
area.
Regarding the lifecycle of the GHCB-related memory areas:
PcdOvmfSecGhcbPageTableBase
PcdOvmfSecGhcbBase
(a) when and how it is initialized after first boot of the VM
If SEV-ES is enabled, the GHCB-related areas are initialized during
the SEC phase [OvmfPkg/ResetVector/Ia32/PageTables64.asm].
(b) how it is protected from memory allocations during DXE
If S3 and SEV-ES are enabled, then InitializeRamRegions()
[OvmfPkg/PlatformPei/MemDetect.c] protects the ranges with an AcpiNVS
memory allocation HOB, in PEI.
If S3 is disabled, then these ranges are not protected. DXE's own page
tables are first built while still in PEI (see HandOffToDxeCore()
[MdeModulePkg/Core/DxeIplPeim/X64/DxeLoadFunc.c]). Those tables are
located in permanent PEI memory. After CR3 is switched over to them
(which occurs before jumping to the DXE core entry point), we don't have
to preserve PcdOvmfSecGhcbPageTableBase. PEI switches to GHCB pages in
permanent PEI memory and DXE will use these PEI GHCB pages, so we don't
have to preserve PcdOvmfSecGhcbBase.
(c) how it is protected from the OS
If S3 is enabled, then (b) reserves it from the OS too.
If S3 is disabled, then the range needs no protection.
(d) how it is accessed on the S3 resume path
It is rewritten same as in (a), which is fine because (b) reserved it.
(e) how it is accessed on the warm reset path
It is rewritten same as in (a).
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien@xen.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
A GHCB page is needed during the Sec phase, so this new page must be
created. Since the #VC exception handler routines assume that a per-CPU
variable area is immediately after the GHCB, this per-CPU variable area
must also be created. Since the GHCB must be marked as an un-encrypted,
or shared, page, an additional pagetable page is required to break down
the 2MB region where the GHCB page lives into 4K pagetable entries.
Create a new entry in the OVMF memory layout for the new page table
page and for the SEC GHCB and per-CPU variable pages. After breaking down
the 2MB page, update the GHCB page table entry to remove the encryption
mask.
The GHCB page will be used by the SEC #VC exception handler. The #VC
exception handler will fill in the necessary fields of the GHCB and exit
to the hypervisor using the VMGEXIT instruction. The hypervisor then
accesses the GHCB in order to perform the requested function.
Four new fixed PCDs are needed to support the SEC GHCB page:
- PcdOvmfSecGhcbBase UINT32 value that is the base address of the
GHCB used during the SEC phase.
- PcdOvmfSecGhcbSize UINT32 value that is the size, in bytes, of the
GHCB area used during the SEC phase.
- PcdOvmfSecGhcbPageTableBase UINT32 value that is address of a page
table page used to break down the 2MB page into
512 4K pages.
- PcdOvmfSecGhcbPageTableSize UINT32 value that is the size, in bytes,
of the page table page.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a DR7 read or write intercept generates a #VC exception.
The #VC handler must provide special support to the guest for this. On
a DR7 write, the #VC handler must cache the value and issue a VMGEXIT
to notify the hypervisor of the write. However, the #VC handler must
not actually set the value of the DR7 register. On a DR7 read, the #VC
handler must return the cached value of the DR7 register to the guest.
VMGEXIT is not invoked for a DR7 register read.
The caching of the DR7 values will make use of the per-CPU data pages
that are allocated along with the GHCB pages. The per-CPU page for a
vCPU is the page that immediately follows the vCPU's GHCB page. Since
each GHCB page is unique for a vCPU, the page that follows becomes
unique for that vCPU. The SEC phase will reserves an area of memory for
a single GHCB and per-CPU page for use by the BSP. After transitioning
to the PEI phase, new GHCB and per-CPU pages are allocated for the BSP
and all APs.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a NPF intercept for an NPT entry with a reserved bit set
generates a #VC exception. This condition is assumed to be an MMIO access.
VMGEXIT must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a NPF NAE
event for MMIO. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXIT_INFO1, SW_EXITINFO2 and SW_SCRATCH values in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a MSR_PROT intercept generates a #VC exception. VMGEXIT must
be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support an MSR_PROT
NAE event. Parse the instruction that generated the #VC exception to
determine whether it is RDMSR or WRMSR, setting the required register
register values in the GHCB and creating the proper SW_EXIT_INFO1 value in
the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a CPUID intercept generates a #VC exception. VMGEXIT must be
used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a CPUID NAE
event. Additionally, CPUID 0x0000_000d (CPUID_EXTENDED_STATE) requires
XCR0 to be supplied in the GHCB, so add support to issue the XGETBV
instruction.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Add support to the #VC exception handler to handle string IO. This
requires expanding the IO instruction parsing to recognize string based
IO instructions as well as preparing an un-encrypted buffer to be used
to transfer (either to or from the guest) the string contents for the IO
operation. The SW_EXITINFO2 and SW_SCRATCH fields of the GHCB are set
appropriately for the operation. Multiple VMGEXIT invocations may be
needed to complete the string IO operation.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Under SEV-ES, a IOIO_PROT intercept generates a #VC exception. VMGEXIT
must be used to allow the hypervisor to handle this intercept.
Add support to construct the required GHCB values to support a IOIO_PROT
NAE event. Parse the instruction that generated the #VC exception,
setting the required register values in the GHCB and creating the proper
SW_EXITINFO1 value in the GHCB.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The base VmgExitLib library provides a default limited interface. As it
does not provide full support, create an OVMF version of this library to
begin the process of providing full support of SEV-ES within OVMF.
SEV-ES support is only provided for X64 builds, so only OvmfPkgX64.dsc is
updated to make use of the OvmfPkg version of the library.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
Add base support to handle #VC exceptions. Update the common exception
handlers to invoke the VmgExitHandleVc () function of the VmgExitLib
library when a #VC is encountered. A non-zero return code will propagate
to the targeted exception handler.
Under SEV-ES, a DR7 read or write intercept generates a #VC exception.
To avoid exception recursion, a #VC exception will not try to read and
push the actual debug registers into the EFI_SYSTEM_CONTEXT_X64 struct
and instead push zeroes. The #VC exception handler does not make use of
the debug registers from the saved context and the exception processing
exit code does not attempt to restore the debug register values.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
To support handling #VC exceptions and issuing VMGEXIT instructions,
create a library with functions that can be used to perform these
#VC/VMGEXIT related operations. This includes functions for:
- Handling #VC exceptions
- Preparing for and issuing a VMGEXIT
- Performing MMIO-related write operations to support flash emulation
- Performing AP related boot opeations
The base functions in this driver will not do anything and will return
an error if a return value is required. It is expected that other packages
(like OvmfPkg) will create a version of the library to fully support an
SEV-ES guest.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2198
VMGEXIT is a new instruction used for Hypervisor/Guest communication when
running as an SEV-ES guest. A VMGEXIT will cause an automatic exit (AE)
to occur, resulting in a #VMEXIT with an exit code value of 0x403.
Since SEV-ES is only supported in X64, provide the necessary X64 support
to execute the VMGEXIT instruction, which is coded as "rep vmmcall". For
IA32, since "vmmcall" is not supported in NASM 32-bit mode and VMGEXIT
should never be called, provide a stub implementation that is identical
to CpuBreakpoint().
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
In python3, array.array.tostring() was a compat alias for tobytes().
tostring() was removed in python 3.9.
Convert this to use tolist() which should be valid for all python
versions.
This fixes this build error on python3.9:
(Python 3.9.0b5 on linux) Traceback (most recent call last):
File "/root/edk2/edk2-edk2-stable202002/BaseTools/BinWrappers/PosixLike/../../Source/Python/Trim/Trim.py", line 593, in Main
GenerateVfrBinSec(CommandOptions.ModuleName, CommandOptions.DebugDir, CommandOptions.OutputFile)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/BinWrappers/PosixLike/../../Source/Python/Trim/Trim.py", line 449, in GenerateVfrBinSec
VfrUniOffsetList = GetVariableOffset(MapFileName, EfiFileName, VfrNameList)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 88, in GetVariableOffset
return _parseForGCC(lines, efifilepath, varnames)
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 151, in _parseForGCC
efisecs = PeImageClass(efifilepath).SectionHeaderList
File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 1638, in __init__
if ByteArray.tostring() != b'PE\0\0':
AttributeError: 'array.array' object has no attribute 'tostring'
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
python3.9 changed/fixed codec.register behavior to always replace
hyphen with underscore for passed in codec names:
https://bugs.python.org/issue37751
So the custom Ucs2Search needs to be adapted to handle 'ucs_2' in
addition to existing 'ucs-2' for back compat.
This fixes test failures on python3.9, example:
======================================================================
FAIL: testUtf16InUniFile (CheckUnicodeSourceFiles.Tests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 375, in PreProcess
FileIn = UniFileClassObject.OpenUniFile(LongFilePath(File.Path))
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 303, in OpenUniFile
UniFileClassObject.VerifyUcs2Data(FileIn, FileName, Encoding)
File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 312, in VerifyUcs2Data
Ucs2Info = codecs.lookup('ucs-2')
LookupError: unknown encoding: ucs-2
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The SSDT Serial port fixup library provides
interfaces to generate a SSDT Serial port table
based on the serial port information.
Update the DBG2 Generator to use the SSDT serial
port fixup library to build a serial port definition
block for the DBG2 serial port and install the
SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
According to Arm Server Base Boot Requirements,
Platform Design Document version 1.2 revision D,
September 2, 2019, section '4.2.1.8 SPCR'; the
SPCR console device must be included in the DSDT.
The SSDT Serial port fixup library provides
interfaces to generate a SSDT Serial port table
based on the serial port information.
Update the SPCR Generator to use the SSDT serial
port fixup library to build a serial port definition
block corresponding to the SPCR serial port and
install the SSDT table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Most platforms have several serial ports. These serial ports
are described to an operating system using definition block
tables.
The SSDT Serial Port Table Generator uses the Configuration
Manager protocol to obtain information for the Serial Ports
on the platform. The serial ports are described using the
CM_ARM_SERIAL_PORT_INFO structure. The EArmObjSerialPortInfo
ID is used to represent a standard serial port.
The SSDT Serial port fixup library provides interfaces to
generate a SSDT Serial port table based on the serial port
information. The SSDT Serial Port Table Generator uses the
SSDT serial port fixup library to build serial port
definition blocks and installs the SSDT tables.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
According to Arm Server Base Boot Requirements,
Platform Design Document version 1.2 revision D,
September 2, 2019, section '4.2.1.8 SPCR'; The
SPCR console device must be included in the DSDT.
Additionally, it is often desirable to describe the
serial ports available on a platform so that they
are available for use by a rich OS.
To facilitate the description of serial ports on a
platform a common SSDT Serial Port Fixup library is
introduced. It provides interfaces to build a SSDT
serial port definition block table based on the
serial port information.
The SSDT Serial Port Fixup library is used by the
SPCR, DBG2 and SSDT Serial Port generator to describe
the serial port information in a definition block.
+------------+ +------------+ +------------+
| SPCR Gen | | DBG2 Gen | | SERIAL Gen |
+------------+ +------------+ +------------+
+----------------------------------+
| SSDT Serial Port Fixup library |
+----------------------------------+
The SSDT Serial Port Fixup library:
- Parses the SSDT Serial Port template using the
AmlLib library to generate an AML tree.
- Updates the _UID, _HID and _CID values.
- Fixes up the Serial port base address, length
and the interrupt number in the _CRS descriptor.
- Fixes up the serial-port name.
- Serialises the AML Tree to a buffer containing
the definition block data.
The definition block data is then installed by the
corresponding table generator.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AsciiFromHex is a function converts a hex number to an
ASCII character. This function is used across multiple
generators, so add it to the TableHelperLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
ACPI Definition blocks are implemented using AML which has
a complex grammar making run-time generation of definition
blocks difficult. Dynamic AML is a feature of Dynamic Tables
framework that provides a solution for dynamic generation of
ACPI Definition block tables.
Since, AML bytecode represents complex AML grammar, an AmlLib
library is introduced to assist parsing and traversing of the
AML bytecode at run-time.
The AmlLib library parses a definition block and represents it
as an AML tree. The AML objects, methods and data are represented
as tree nodes. Since the AML data is represented as tree nodes,
it is possible to traverse the tree, locate a node and modify the
node data. The tree can then be serialized to a buffer (that
represents the definition block). This definition block containing
the fixed-up AML code can then be installed as an ACPI Definition
Block table.
Dynamic AML introduces the following techniques:
* AML Fixup
* AML Codegen
* AML Fixup + Codegen
AML Fixup is a technique that involves compiling an ASL template
file to generate AML bytecode. This template AML bytecode can be
parsed at run-time and a fixup code can update the required fields
in the AML template.
AML Codegen employs generating small segments of AML code.
AmlLib provides a rich set of APIs to operate on AML data for AML
Fixup and Codegen.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AmlLib library implements an AML parser, AML tree interface,
serialiser, code generator and other interfaces to generate
Definition Block tables.
The AmlLib APIs are a collection of interfaces that enable
parsing, iterating, modifying, adding, and serialising AML
data to generate a Definition Block table.
The AmlLib APIs are declared in Include\AmlLib\AmlLib.h
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML Core interface APIs are internal APIs of the
AmlLib library. These APIs can be used to:
- Create/Delete/Clone an AML tree/node
- Get/update Fixed and Variable arguments
- Serialize an AML tree.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML Codegen is a Dynamic AML technique that facilitates
generation of small segments of AML code. The AML code
generated using AML Codegen is represented as nodes in
the AML Tree.
AML Resource Data Codegen implements interfaces required
for generating Resource Data elements that can be attached
to an AML tree.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML Codegen is a Dynamic AML technique that facilitates
generation of small segments of AML code. The AML code
generated using AML Codegen is represented as nodes in
the AML Tree.
Some examples where AML Codegen can be used are:
- AML Codegen APIs can be used to generate a simple
AML tree.
- An AML template can be parsed to create an AML
tree. This AML Tree can be searched to locate a
node that needs updating. The AML Codegen APIs
can be used to attach new AML nodes.
- A combination of AML Fixup and AML Codegen can
be used to generate an AML tree.
The AML tree can then be serialised as a Definition
Block table.
Following AML Codegen APIs are implemented:
- AmlCodeGenDefinitionBlock()
- AmlCodeGenScope()
- AmlCodeGenNameString()
- AmlCodeGenNameInteger()
- AmlCodeGenDevice()
These AML Codegen APIs in combination with AML Resource
Data Codegen APIs can be used to generate a simple AML
tree.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The AML language allows defining field lists in a Definition
Block. Although Dynamic AML does not provide interfaces to
modify Field Lists; an AML template code may contain Field
lists and the AML parser must be capable of parsing and
representing the Field lists in the AML tree.
The AML parser creates an Object node that represents the
'Field Node'. The AML Field list parser creates an object
node for each field element parsed in the AML byte stream,
and adds them to the variable list of arguments of the
'Field Node'.
Nodes that can have a field list are referred as 'Field
nodes'. They have the AML_HAS_FIELD_LIST attribute set in
the AML encoding.
According to the ACPI 6.3 specification, s20.2.5.2 "Named
Objects Encoding", field elements can be:
- NamedField := NameSeg PkgLength;
- ReservedField := 0x00 PkgLength;
- AccessField := 0x01 AccessType AccessAttrib;
- ConnectField := <0x02 NameString> | <0x02 BufferData>;
- ExtendedAccessField := 0x03 AccessType ExtendedAccessAttrib
AccessLength.
A small set of opcodes describes the field elements. They are
referred as field opcodes. An AML_BYTE_ENCODING table has been
created for field OpCodes.
Field elements:
- don't have a SubOpCode;
- have at most 3 fixed arguments (as opposed to 6 for standard
AML objects);
- don't have a variable list of arguments;
- only the NamedField field element is part of the AML namespace.
ConnectField's BufferData is a buffer node containing a single
resource data element.
NamedField field elements do not have an AML OpCode. NameSeg
starts with a Char type and can thus be differentiated from the
Opcodes for other fields.
A pseudo OpCode has been created to simplify the parser.
Following is a representation of a field node in an AML tree:
(FieldNode)
\
|- [0][1][3] # Fixed Arguments
|- {(FldEl0)->(FldEl1)->...)} # Variable Arguments
Where FldEl[n] is one of NamedField, ReservedField, AccessField,
ConnectField, ExtendedAccessField.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The AML language allows a Definition Block to implement
methods that an Operating System can invoke at runtime.
Although Dynamic AML does not provide interfaces to
modify AML methods; an AML template code may contain
methods and/or method invocations.
Method definitions have an opcode defined in the AML
encoding and can be easily parsed. However, the language
does not define an opcode for method invocation. Method
invocations are represented as a NameString followed by
the arguments to the method. This poses a significant
challenge for the AML parser as it has to determine if
a NameString appearing in the AML byte stream is a method
invocation and if it is a method invocation, then how
many arguments follow.
This also means the Method definition must occur prior to
the method invocation in the AML byte stream. This is a
hard requirement for the AML parser.
The AML method parser maintains a NameSpaceRefList that
keeps a track of every namespace node and its raw AML
absolute path. The AmlIsMethodInvocation() searches the
NameSpaceRefList to determine if a NameString matches
a Method definition.
A pseudo opcode has been defined in the AML encoding to
represent the Method invocation in the AML tree.
The AML encoding for method invocations in the ACPI
specification 6.3 is:
MethodInvocation := NameString TermArgList
The AmlLib library redefines this as:
MethodInvocation := MethodInvocationOp NameString
ArgumentCount TermArgList
ArgumentCount := ByteData
Where MethodInvocationOp is the pseudo opcode and
ArgumentCount is the number of arguments passed to
the method.
NOTE:
The AmlLib library's definition for a method
invocation only applies to the representation
of method invocation node in the AML tree.
When computing the size of a tree or serialising
it, the additional data is not taken into account
i.e. the MethodInvocationOp and the ArgumentCount
are stripped before serialising.
Method invocation nodes have the AML_METHOD_INVOVATION
attribute set in the AmlLib library's representation of
the AML encoding.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Resource data are defined in the ACPI 6.3 specification,
s6.4 "Resource Data Types for ACPI". They can be created
using the ASL ResourceTemplate () statement, cf s19.3.3
"ASL Resource Templates".
Resource data can be of the small or large type and are
defined by their encoding. The resource data is stored
in the Bytelist of a BufferOp node. The Bytelist of a
BufferOp node is represented by an AML Data node in
the AML tree.
The resource data parser, examines the Bytelist (Data
node buffer) to detect the presence of resource data.
If the Bytelist data matches the encoding for resource
data types, the resource data parser fragments the
Bytelist containing the resource data buffer into
resource data elements represented as individual Data
nodes and stores them in the variable arguments list
of the BufferOp object nodes.
Example: ASL code and the corresponding AML tree
representation for the resource data.
ASL Code
--------
Name (_CRS, ResourceTemplate() {
QWordMemory (...)
Interrupt (...)
}
AML Tree
--------
(NameOp)
\
|-[_CRS]-[BufferOp] # Fixed Arguments
|-{NULL} \ # Variable Argument
\ list
|-[BuffSize] # Fixed Arguments
|-{(Rd1)->(Rd2)->(EndTag)} # Variable Argument
list
Where:
Rd1 - QWordMemory resource data element.
Rd2 - Interrupt resource data element.
EndTag - Resource data end tag.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Resource data are defined in the ACPI 6.3 specification,
s6.4 "Resource Data Types for ACPI". They can be created
using the ASL ResourceTemplate () statement, cf s19.3.3
"ASL Resource Templates".
Resource data can be of the small or large type and are
defined by their encoding. The resource data is stored
in the Bytelist of a BufferOp node. To simplify
operations on resource data, the resource data parser
examines the Bytelist to detect the presence of resource
data. If the data matches the encoding of resource
data type(s), the parser fragments the resource data
buffer into resource data elements (data nodes) and
stores them in the variable arguments list of the
BufferOp node.
The resource data helper provides functions and macros
to assist operations on resource data elements.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Both ASL and AML are declarative language. The ASL code
is compiled to AML bytecode. The AML bytecode is processed
by the ACPI AML interpreter that runs as part of an OS.
AML has a complex encoding making dynamic generation of
Definition Block tables difficult.
Dynamic AML generation involves techniques like AML Fixup
and AML Codegen, both requiring parsing of AML bytecode.
The AML parser is a module that parses an AML byte stream
and represents it as an AML tree. Representing the AML
bytecode as an AML tree is key to reducing the complexity
and enabling Dynamic AML generation.
In an AML Tree each AML statement (that also corresponds
to an ASL statement) is represented as an 'Object Node'.
Each Object Node has an OpCode and up to 6 Fixed Arguments
followed by a list of Variable Arguments.
(ObjectNode)
\
|- [0][1][2][3][4][5] # Fixed Arguments
|- {(VarArg1)->(VarArg2)->...N} # Variable Arguments
A Fixed Argument or Variable Argument can be either an
Object Node or a Data Node.
A 'Data Node' consists of a data buffer.
A 'Root Node' is a special type of Object Node that does
not have an Opcode or Fixed Arguments. It only has a list
of Variable Arguments. The Root Node is at the top of the
AML tree and contains the Definition Block Header.
The AML parser uses the 'AML Encoding' to parse an AML byte
stream and represents it as an AML Tree. Representing in the
form of an AML tree simplifies modification, addition and
removal of the tree nodes. The modified tree can then be
serialised to a buffer representing a Definition Block table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML is a declarative language that is processed by the
ACPI AML interpreter. The ACPI AML interpreter will
compile the set of declarations into the ACPI Namespace
at definition block load time.
The hardware information described in AML is effectively
mapped in the ACPI Namespace. The AML ACPI namespace
interface implement the functionality to search the ACPI
Namespace. Example: The AmlFindNode() can be used to locate
a device node in the ACPI namespace using an ASL path as
the search input.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The AML debug print functions enable logging
of the operations on the AML tree and the data
output. The debug logging functionality is
enabled for debug builds when the DEBUG_INFO
or DEBUG_VERBOSE mask is enabled in the PCD
gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML Fixup and AML Codegen facilitate dynamic generation
of Definition Block tables. The AML byte stream that is
generated is represented in an AML tree. Once the AML
table generation is completed, the AML tree needs to be
serialised for installing as an ACPI table.
The AML serialise interface implements the functionality
to iterate the nodes in the AML tree, collating the AML
bytecode, computing the checksum and writing the AML byte
stream to a buffer that represents the Definition Block
table.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Co-authored-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Dynamic AML involves parsing/packing of AML opcode and
data into AML byte streams. The AML stream interface
provides safe buffer management as well as supports
forward and reverse streams. It provides functions to
create, read, write, clone and compare AML streams.
Co-authored-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Dynamic AML requires encoding/decoding and conversion of
AML and ASL strings. A collection of helper functions
have been provided for internal use in the AmlLib Library.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The AML utility interfaces are a collection of helper functions
that assist in computing the checksum, size and to propagate the
node information as a result of addition or update of AML nodes.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
It is often desirable to clone an AML branch/tree
or an AML node. An example of could be to clone
an AML template before fixup so that the original
AML template remains unmodified. Another example
would be replicating a device branch in the AML
tree and fixing up the device information.
To facilitate such scenarios the AmlLib library
provides functions that can be used to clone an
AML branch/tree or an AML node.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The AML tree iterator provides interfaces to traverse the nodes
in the AML tree. The iterator can traverse the AML tree nodes in
the following order:
- Linear progression: Iterate following the AML byte stream
order (depth first).
- Branch progression: Iterate following the AML byte stream
order (depth first), but stop iterating
at the end of the branch.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The AML tree traversal provides interfaces to traverse the
nodes in the AML tree.
It provides interfaces to traverse the AML tree in the
following order:
- Traverse sibling nodes.
(Node) /-i # Child of fixed argument b
\ /
|- [a][b][c][d] # Fixed Arguments
|- {(e)->(f)->(g)} # Variable Arguments
\
\-h # Child of variable argument e
Traversal Order:
- AmlGetNextSibling() : a, b, c, d, e, f, g, NULL
- AmlGetPreviousSibling(): g, f, e, d, c, b, a, NULL
- Iterate depth-first path (follow AML byte stream).
(Node) /-i # Child of fixed argument b
\ /
|- [a][b][c][d] # Fixed Arguments
|- {(e)->(f)->(g)} # Variable Arguments
\
\-h # Child of variable argument e
Traversal Order:
- AmlGetNextNode(): a, b, i, c, d, e, h, f, g, NULL
- AmlGetPreviousNode() g, f, h, e, d, c, i, b, a, NULL
Note: The branch i and h will be traversed if it has
any children.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The AML tree enumerator interface allows enumeration of the
nodes in the AML tree. The enumerator interface can be useful
to search, serialise, print etc. the nodes in the AML tree.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The AML tree is composite and has the following node types:
- Root node.
- Object node.
- Data node.
These nodes are part of the Fixed Arguments or the Variable
arguments list in the AML tree.
The AML tree interface provides functions to manage the fixed
and the variable argument nodes in the AML tree.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
AML has a complex grammar, and this makes runtime modifications
on an AML byte stream difficult. A solution is to parse the AML
bytecode and represent it in a tree data structure, henceforth
called the AML tree.
The AML tree is composite in the sense it has the following node
types:
- A 'Root node' that represents the root of the AML tree.
- An 'Object node' that contains the OP Code (AML Encoding).
- A 'Data node' that contains a data buffer.
The Root node contains the Definition block header (ACPI header)
and a Variable Argument list.
The Object node is composed of an array of Fixed Arguments and
a Variable Argument list.
Fixed arguments can be either Object Nodes or Data nodes. Their
placement (index) in the Fixed Argument array is defined by the
AML encoding of the enclosing Object Node.
Variable arguments can be Object nodes or Data nodes.
Following is a depiction of a typical AML tree:
(/) # Root Node
\
|-{(N1)->...} # Variable Argument list, N1 is
\ # an Object Node
\ /-i # Child of fixed argument b
\ /
|- [a][b][c][d] # Fixed Arguments
|- {(e)->(f)->(g)} # Variable Arguments
\
\-h # Child of variable argument e
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
ASL is a source language for defining ACPI objects including
writing ACPI control methods. An ASL file is compiled using
an ASL compiler tool to generate ACPI Machine Language (AML).
This AML bytecode is processed by the ACPI AML interpreter
that runs as part of an Operating System (OS).
Both ASL and AML are declarative languages. Although they
are closely related they are different languages.
ASL statements declare objects. Each object has three parts,
two of which can be NULL:
Object := ObjectType FixedList VariableList
The AML grammar defines corresponding encodings that makes
up the AML byte stream.
This patch introduces the AML grammar definitions used by
AmlLib for encoding/decoding AML byte streams.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Dynamic AML is a solution to generate Definition Block tables
at runtime. Dynamic AML provides the following techniques for
generating AML tables.
- AML Fixup
- AML Codegen
- AML Fixup + Codegen
AML fixup involves patching small sections of a template AML
code at runtime, while AML Codegen provides APIs to generate
small sections of AML code at runtime. A combination of
Fixup and Codegen can also be used.
AML has a complex grammar. To simplify the generation of
AML tables, Dynamic AML introduces AmlLib that provides a
rich set of APIs for parsing, traversing, fixup, codegen
and serialisation of AML byte code.
This patch introduces the definitions used by AmlLib.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
ACPI Definition block (e.g. DSDT or SSDT) tables are implemented
using ACPI source language (ASL) and compiled to ACPI Machine
language (AML). The AML bytecode runs in the OS ACPI Interpreter.
AML has a complex grammar which makes generation of ACPI Definition
block tables difficult.
Dynamic Tables Framework introduces a new feature 'Dynamic AML' that
aims at simplifying the generation of ACPI Definition block tables.
Dynamic AML provides the following techniques for generating ACPI
Definition blocks.
- AML Fixup
- AML Codegen
- AML Fixup + Codegen
AML Fixup involves patching an AML template code at runtime and then
installing the fixed-up AML code as an ACPI table.
AML Codegen provides APIs to generate small segments of AML code that
can be serialised for installation as an ACPI table.
AML Fixup + Codegen is an approach where parts of an AML template are
fixed-up at runtime as well as the AML Codegen APIs are used to insert
small segments of AML code in the AML template. This AML code is then
serialised for installation as an ACPI table.
To assist Dynamic AML generation an AmlLib library is introduced that
provides a rich set of APIs that can be used to parse, traverse, fixup,
codegen and serialise AML definition blocks.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2823
Refer to UEFI spec 2.8, Section 13.3.2, a block device should
be scanned as below order:
1. GPT
2. ISO 9660 (El Torito) (UDF should aslo be here)
3. MBR
4. no partition found
Note: UDF is using the same boot method as CD, so put it in
the same priority with ISO 9660.
This would also solve the issue that ISO image with MBR would
be treat as MBR device instead of CD/DVD. That would make the
behavior of the image boot different:
If the CD/DVD's MBR be handled correctly, it would be enumerated
as a bootable device with MBR path and FAT filesystem. Some Linux
Distributions boot from such path (FAT with MBR path for ISO) would
come into the grub console instead of the installation selection.
With this change, the CD/DVD would always be enumerated with CD path.
And it would always boot to the installation selection.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Gary Lin <glin@suse.com>
Cc: Andrew Fish <afish@apple.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Gary Lin <glin@suse.com>
The unit test app supports running in 3 mode:
1. MtrrLibUnitTest generate-random-numbers
<path to MtrrLib/UnitTest/RandomNumber.c> <random-number count>
It generates random numbers and writes to RandomNumber.c.
2. MtrrLibUnitTest [<iterations>]
It tests MtrrLib APIs using configurations generated from static
numbers generated by mode #1.
This is the default execution mode running in CI environment.
3. MtrrLibUnitTest <iterations> random
It tests MtrrLib APIs using configurations generated from random
numbers.
This is what developers can use to test MtrrLib for regressions.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ming Shao <ming.shao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Add host based unit tests for the MtrrLib services.
The BaseLib services AsmCpuid(), AsmReadMsr64(), and
AsmWriteMsr64() are hooked and provide simple emulation
of the CPUID leafs and MSRs required by the MtrrLib to
run as a host based unit test.
Test cases are developed for each of the API.
For the most important APIs MtrrSetMemoryAttributesInMtrrSettings()
and MtrrSetMemoryAttributeInMtrrSettings(), random inputs are
generated and fed to the APIs to make sure the implementation is
good. The test application accepts an optional parameter which
specifies how many iterations of feeding random inputs to the two
APIs. The overall number of test cases increases when the iteration
increases. Default iteration is 10 when no parameter is specified.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Ming Shao <ming.shao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ming Shao <ming.shao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
While RISC-V hart is trapped into S-Mode, the S-Mode interrupt
CSR (SIE) is disabled by RISC-V hart. However the (SIE) is enabled
again by RestoreTPL, this causes the second S-Mode trap is triggered
by the machine mode (M-Mode)timer interrupt redirection. The SRET
instruction clear Supervisor Previous Privilege (SPP) to zero
(User mode) in the second S-Mode interrupt according to the RISC-V
spec. Above brings hart to the user mode (U-Mode) when execute
SRET in the nested S-Mode interrupt handler because SPP is set to
User Mode in the second interrupt. Afterward, system runs in U-Mode
and any accesses to S-Mode CSR causes the invalid instruction exception.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Liming Gao <liming.gao@intel.com>
If MDEPKG_NDEBUG is defined, then debug and assert related
macros wrapped by it are mapped to NULL implementations.
Therefore, add MDEPKG_NDEBUG flags for release builds of
DynamicTablesPkg.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The EdkII BaseTools have been updated to facilitate the
generation of C file containing AML data using the AmlToC
script. The build system follows the following sequence
for an ASL file compilation:
- The ASL file is preprocessed using the C preprocessor
- The Trim utility prunes the preprocessed file to removed
unwanted data.
- This file is compiled using an ASL compiler to generate
an AML file.
- The AmlToC python script reads the AML data and generates
a C file with an array containing the AML data.
- This C file containing a unique symbol name for the AML
data array is then compiled with the firmware module.
This removes the dependency on the ACPICA iASL compiler's
"-tc" option which achieved the same effect but was less
portable. Therefore, remove the "-tc" option from the ASL
flags as this option is only been supported by the ACPICA
iASL compiler.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The TianoCore EDKII project has introduced a Core CI infrastructure
using TianoCore EDKII Tools PIP modules:
* https://pypi.org/project/edk2-pytool-library/
* https://pypi.org/project/edk2-pytool-extensions/
The edk2\.pytool\Readme.md provides information to configure the
environment and to run local builds.
This patch defines the necessary settings for enabling the Core CI
builds for DynamicTablesPkg.
- Add DynamicTablesPkg.ci.yaml for Core CI
- Update ReadMe.md for details and instructions
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The TianoCore EDKII project has introduced a Core CI infrastructure
using TianoCore EDKII Tools PIP modules:
* https://pypi.org/project/edk2-pytool-library/
* https://pypi.org/project/edk2-pytool-extensions/
More information on configuring the environment and running the
builds can be found in edk2\.pytool\Readme.md
This patch fixes the issues reported by the CI system mainly around
fixing typo errors and package dec and dsc files. A subsequent patch
enables the CI builds for the DynamicTablesPkg.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Change how some SMBIOS TYpe 17 field values are printed:
- TotalWidth, DataWidth, ConfiguredMemoryClockSpeed: Print as
hex values instead of decimal, since there are some special meanings
for certain values (e.g. 0xFFFF)
- VolatileSize, NonVolatileSize, CacheSize, and LogicalSize: Print
as "0x%lx" instead of "0x%x" to prevent truncating output when
printing these QWORD fields.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Sami Mujawar <Sami.Mujawar@arm.com>
Signed-off-by: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
A user may fall through to the case they depend on the
PcdFmpDeviceImageTypeIdGuid value to get the ImageTypeId GUID
value. The default PCD value is 0 (NULL) so the code would
further fall back on the gEfiCallerIdGuid value.
This change modifies the print error level for the message that
indicates this occurred to DEBUG_WARN from DEBUG_INFO to better
warn the user that this occurred.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Cc: Wei6 Xu <wei6.xu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Wei6 Xu <wei6.xu@intel.com>
Update list of content that is covered by a license other than
the BSD-2-Clause Plus Patent License and break out list of
content that is included as a git submodule from upstream
projects.
* Use alphabetic order of content
* Remove references to IntelFrameworkModulePkg
* Add reference for UnitTestFrameworkPkg use of cmocka
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
These can be used, for instance, to automate the population of an SMBIOS
Type 0 BIOS Release Date when building a UEFI firmware (which is how we
plan to use these macros for the Raspberry Pi platform).
These macros should work for any compiler that follows ISO/IEC 9899, but
we add a check for the compiler we have tested to be on the safe side.
Note that we decided against adding a #error or #warn for compilers that
haven't been validated, as we don't want to introduce breakage for people
who may already be using the header with something else than gcc, MSVC or
Clang. Instead, we expect those to send a patch that adds their compiler
to the list, once they have tested the macros there.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Sean reports that having two DEC files under OvmfPkg violates the DEC
spec:
> An EDK II Package (directory) is a directory that contains an EDK II
> package declaration (DEC) file. Only one DEC file is permitted per
> directory. EDK II Packages cannot be nested within other EDK II
> Packages.
This issue originates from commit 656419f922 ("Add BhyvePkg, to support
the bhyve hypervisor", 2020-07-31).
Remedy the problem as follows. (Note that these steps are not split to
multiple patches in order to keep Bhyve buildable across the transition.)
(1) Delete "OvmfPkg/Bhyve/BhyvePkg.dec".
(2) Point the [Packages] sections of the Bhyve-specific AcpiPlatformDxe,
BhyveRfbDxe, and BhyveFwCtlLib INF files to "OvmfPkg.dec".
(3) Migrate the artifacts that "BhyvePkg.dec" used to have on top of
"OvmfPkg.dec" as follows:
(3a) Merge the copyright notices from Rebecca Cran and Pluribus Networks
into "OvmfPkg.dec".
(3b) Merge the "BhyveFwCtlLib" class header definition into "OvmfPkg.dec".
(3c) Merge value 0x2F8 for the fixed PcdDebugIoPort into
"BhyvePkgX64.dsc".
(4) Unnest the the Include/Library/ and Library/ subtrees from under
OvmfPkg/Bhyve to the corresponding, preexistent subtrees in OvmfPkg.
The goal is to keep the [Includes] section in the "OvmfPkg.dec" file
unchanged, plus simplify references in "BhyvePkgX64.dsc". Non-library
modules remain under "OvmfPkg/Bhyve/".
(4a) The BhyveFwCtlLib class header, and sole instance, are already
uniquely named, so their movements need not involve file renames.
(4b) Rename the Bhyve-specific PlatformBootManagerLib instance to
PlatformBootManagerLibBhyve, in additon to moving it, for
distinguishing it from OvmfPkg's preexistent lib instance. Apply the
name change to all three of the lib instance directory name, the INF
file, and the BASE_NAME define in the INF file.
(4c) Update lib class resolutions in "BhyvePkgX64.dsc" accordingly.
(5) Replace the "ACPI table storage" FILE_GUID in
"OvmfPkg/Bhyve/AcpiTables/AcpiTables.inf" with a new GUID, and
open-code the "ACPI table storage" GUID in the "ACPITABLE" FDF rule
instead, replacing $(NAMED_GUID). This step is necessary because CI
requires unique FILE_GUIDs over all INF files, and OVMF's original
"AcpiTables.inf" already uses the "ACPI table storage" GUID as
FILE_GUID.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Cc: Sean Brogan <spbrogan@outlook.com>
Fixes: 656419f922
Reported-by: Sean Brogan <spbrogan@outlook.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200801155024.16439-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Most busy waits (spinlocks) in "UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c"
already call CpuPause() in their loop bodies; see SmmWaitForApArrival(),
APHandler(), and SmiRendezvous(). However, the "main wait" within
APHandler():
> //
> // Wait for something to happen
> //
> WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);
doesn't do so, as WaitForSemaphore() keeps trying to acquire the semaphore
without pausing.
The performance impact is especially notable in QEMU/KVM + OVMF
virtualization with CPU overcommit (that is, when the guest has
significantly more VCPUs than the host has physical CPUs). The guest BSP
is working heavily in:
BSPHandler() [MpService.c]
PerformRemainingTasks() [PiSmmCpuDxeSmm.c]
SetUefiMemMapAttributes() [SmmCpuMemoryManagement.c]
while the many guest APs are spinning in the "Wait for something to
happen" semaphore acquisition, in APHandler(). The guest APs are
generating useless memory traffic and saturating host CPUs, hindering the
guest BSP's progress in SetUefiMemMapAttributes().
Rework the loop in WaitForSemaphore(): call CpuPause() in every iteration
after the first check fails. Due to Pause Loop Exiting (known as Pause
Filter on AMD), the host scheduler can favor the guest BSP over the guest
APs.
Running a 16 GB RAM + 512 VCPU guest on a 448 PCPU host, this patch
reduces OVMF boot time (counted until reaching grub) from 20-30 minutes to
less than 4 minutes.
The patch should benefit physical machines as well -- according to the
Intel SDM, PAUSE "Improves the performance of spin-wait loops". Adding
PAUSE to the generic WaitForSemaphore() function is considered a general
improvement.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1861718
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200729185217.10084-1-lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Add configuration IgnoreFiles for package config files.
So users can rely on this to skip license conflict for
some generated files.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add configuration IgnoreFiles for package config files.
So users can rely on this to skip license conflict for
some generated files.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
Introduces new changes to PeiCore to move the contents of temporary
RAM visible to the PeiCore to permanent memory. This expands on
pre-existing shadowing support in the PeiCore to perform the following
additional actions:
1. Migrate pointers in PPIs installed in PeiCore to the permanent
memory copy of PeiCore.
2. Copy all installed firmware volumes to permanent memory.
3. Relocate and fix up the PEIMs within the firmware volumes.
4. Convert all PPIs into the migrated firmware volume to the corresponding
PPI address in the permanent memory location.
This applies to PPIs and PEI notifications.
5. Convert all status code callbacks in the migrated firmware volume to
the corresponding address in the permanent memory location.
6. Update the FV HOB to the corresponding firmware volume in permanent
memory.
7. Use PcdMigrateTemporaryRamFirmwareVolumes to control if enable the
feature or not. when disable the PCD, the EvacuateTempRam() will
never be called.
The function control flow as below:
PeiCore()
DumpPpiList()
EvacuateTempRam()
ConvertPeiCorePpiPointers()
ConvertPpiPointersFv()
MigratePeimsInFv()
MigratePeim()
PeiGetPe32Data()
LoadAndRelocatePeCoffImageInPlace()
MigrateSecModulesInFv()
ConvertPpiPointersFv()
ConvertStatusCodeCallbacks()
ConvertFvHob()
RemoveFvHobsInTemporaryMemory()
DumpPpiList()
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
The security researcher found that we can get control after NEM disable.
The reason is that the flash content reside in NEM at startup and the
code will get the content from flash directly after disable NEM.
To avoid this vulnerability, the feature will copy the PEIMs from
temporary memory to permanent memory and only execute the code in
permanent memory.
The vulnerability is exist in physical platform and haven't report in
virtual platform, so the virtual can disable the feature currently.
When enable the PcdMigrateTemporaryRamFirmwareVolumes, always shadow
all PEIMs no matter the condition of PcdShadowPeimOnBoot or
PcdShadowPeimOnS3Boot.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1004
Being a compiler builtin, the type of __builtin_return_address is
already known to the compiler so no prototype is needed. Clang also
errors out when redeclaring certain builtins like this[1], though
currently only for ones with custom type checking. At the moment,
__builtin_return_address does not use custom type checking and so does
not trigger this error, however, the CHERI fork of LLVM, which will form
the basis of the toolchain for Arm's experimental Morello platform, does
use custom type checking for it, and so gives an error. Thus, simply
delete the unnecessary line.
[1] llvm/llvm-project@41af971375
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Upgrade openssl to 1.1.1g. the directory have been reorganized,
openssl moved crypto/include/internal to include/crypto folder.
So we change directory to match the re-organization.
The dso_conf.h and opensslconf.h will generated in UNIX format,
change process_files.pl to covent the EOL automatically.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2827
Fix a bug about parse the macro value which use another macro.
Use the following example to verify:
[Define]
DEFINE M1 = V1
DEFINE M2 = $(M1)/V2
!include $(M2)/pcd.dsc
The old code will failed parse M2 and cause following error:
Traceback (most recent call last):
File "Edk2\IntelFsp2Pkg\Tools\GenCfgOpt.py", line 1550, in <module>
sys.exit(Main())
File "Edk2\IntelFsp2Pkg\Tools\GenCfgOpt.py", line 1513, in Main
if GenCfgOpt.ParseDscFile(DscFile, FvDir) != 0:
File "Edk2\IntelFsp2Pkg\Tools\GenCfgOpt.py", line 533, in ParseDscFile
NewDscLines = IncludeDsc.readlines()
ValueError: I/O operation on closed file.
The tool should support the value use another macro, and expand it.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Ming Tan <ming.tan@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The following command line:
build -b NOOPT -a IA32 -t VS2017 -p edk2\EmbeddedPkg\EmbeddedPkg.dsc
Generates the following error:
MmcDxe.lib(Diagnostics.obj) : error LNK2001:
unresolved external symbol __allshl
MmcDxe.lib(Diagnostics.obj) : error LNK2001:
unresolved external symbol __aullshr
MmcDxe.lib(MmcBlockIo.obj) : error LNK2001:
unresolved external symbol __allmul
These erros are due to the use of shift/multiply operations
on UINT64 variable on a IA32 architecture.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
UnicodeStrToAsciiStrS requires that the source string is shorter than
the destination buffer and will ASSERT if this is not true. Switch to
UnicodeStrnToAsciiStrS as there are cases where the source string is
longer than the buffer allocated for the device path.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
During build, the meta files are not changed, so it's no need
to check file timestamp.
This patch is to remove useless logic.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
ReadMe.txt contained outdated information. Update it to match current
functionality (e.g. sqlite3 is no longer used), and convert the
formatting from ad-hoc to reStructuredText.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GCC48_ALL_CC_FLAGS has no dependency on GCC_ALL_CC_FLAGS.
By definition, there should be such dependency.
The outcomes of this patch is that GCC48_ALL_CC_FLAGS and
other dependent configurations will inherit from the
additional "-Os" flag.
The "-Os" flag optimizes a build in size, not breaking any
build. In a gcc command line, the last optimization flag
has precedence. This means that this "-Os" flag will be
overriden by a more specific optimization configuration,
provided that this more specific flag is appended at the
end of the CC_FLAGS.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
By default, gcc allows void* pointer arithmetic.
This is a GCC extension.
However:
- the C reference manual states that void*
pointer "cannot be operands of addition
or subtraction operators". Cf s5.3.1
"Generic Pointers";
- Visual studio compiler treat such operation as
an error.
To prevent such pointer arithmetic, the "-Wpointer-arith"
flag should be set for all GCC versions.
The "-Wpointer-arith" allows to:
"Warn about anything that depends on the "size of"
a function type or of void. GNU C assigns these
types a size of 1, for convenience in calculations
with void * pointers and pointers to functions."
This flag is available since GCC2.95.3 which came out in 2001.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2818
For better memory management, re-ordered the DestroyRamDisk and
ReportStatusCode calls inside the EfiBootManagerBoot() function.
This will help to clean the unused memory before reporting the
failure status, so that OEMs can use RSC Listener to launch
custom boot option or application for recovering the failed
hard drive.
This change will help to ensure that the allocated pool of memory
for the failed boot option is freed before executing OEM's RSC
listener callback to handle every boot option failure.
Signed-off-by: KrishnadasX Veliyathuparambil Prakashan <krishnadasx.veliyathuparambil.prakashan@intel.com>
Cc: "Gao, Zhichao" <zhichao.gao@intel.com>
Cc: "Ni, Ray" <ray.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
This is the second part of LsiScsiPassThru(). LsiScsiProcessRequest() is
added to translate the SCSI Request Packet into the LSI 53C895A
commands. This function utilizes the so-called Script buffer to transmit
a series of commands to the chip and then polls the DMA Status (DSTAT)
register until the Scripts Interrupt Instruction Received (SIR) bit
sets. Once the script is done, the SCSI Request Packet will be modified
to reflect the result of the script. The Cumulative SCSI Byte Count
(CSBC) register is fetched before and after the script to calculate the
transferred bytes and update InTransferLength/OutTransferLength if
necessary.
v3:
- Set DStat, SIst0, and SIst1 to 0 before using them
- Amend the if statements for the DMA data instruction and add the
assertions for the data direction
- Also set SenseDataLength to 0 on the error path
- Fix typos and amend comments
- Amend the error handling of the calculation of transferred bytes
v2:
- Use the BITx macros for the most of LSI_* constants
- Fix a typo: contorller => controller
- Add SeaBIOS lsi-scsi driver as one of the references of the script
- Cast the result of sizeof to UINT32 for the instructions of the
script
- Drop the backslashes
- Replace LSI_SCSI_DMA_ADDR_LOW with LSI_SCSI_DMA_ADDR since we
already removed DUAL_ADDRESS_CYCLE
- Add more comments for the script
- Fix the check of the script size at the end of the script
- Always set SenseDataLength to 0 to avoid the caller to access
SenseData
- Improve the error handling in LsiScsiProcessRequest()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-11-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Open PciIo protocol and use it to initialize the device. The
initialization of LSI 53C895A is simple: just set the SRST bit in
Interrupt Status Zero register to reset the device.
v2:
- Use the BITx macros for the bit constants
- Add the closing of PciIo protocol in LsiScsiControllerStop()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-8-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement LsiScsiGetNextTargetLun(), LsiScsiBuildDevicePath(),
LsiScsiGetTargetLun(), and LsiScsiGetNextTarget() to report Targets and
LUNs and build the device path.
This commit also introduces two PCD value: PcdLsiScsiMaxTargetLimit and
PcdLsiScsiMaxLunLimit as the limits for Targets and LUNs.
v3:
- Update the range of LUN in the assertioin
- Squash the spurious newline into the previous commit
v2:
- Zero out (*Target) in LsiScsiGetTargetLun()
- Use CopyMem() instead of the one-byte shortcut to copy target from
ScsiDevicePath->Pun
- Add asserts for PcdLsiScsiMaxTargetLimit and PcdLsiScsiMaxLunLimit
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-7-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Partially implement LsiScsiControllerStart() and LsiScsiControllerStop()
to insert the scaffolding of EXT_SCSI_PASS_THRU functions.
v3: Squash the newline below the declaration of LSI_SCSI_FROM_PASS_THRU
v2: Remove the closing of PciIo protocol from LsiScsiControllerStop().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-6-glin@suse.com>
Original code GetFmpImageDescriptors for OriginalFmpImageInfoBuf
pointer, if failed, return a NULL pointer. The OriginalFmpImageInfoBuf
should not be NULL and the NULL pointer dereference case
should be false positive.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Vin Xue <vinxue@outlook.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Update INF file to use a [Pcd] section instead of a
[FixedPcd] section. [FixedPcd] should only be used in an
INF file if the source code looks up the PCD value using
the PcdLib FixedPcdGetxx() services. Using [FixedPcd]
forces a platform to configure the PCD to type FixedAtBuild.
In this case, PcdDebugPropertyMask supports PCD types
FixedAtBuild and PatchableInModule. Without this change
any platform that wants to use PcdDebugPropertyMask as
type PatchableInModule breaks the build.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2801
Add the UT_EXPECT_ASSERT_FAILURE(FunctionCall, Status) macro
to the UnitTestLib that can be used to check if a function
under test triggers an ASSERT() condition. If an ASSERT()
condition is triggered, then the macro returns. If the
ASSERT() condition is not triggered, then the current unit
test fails with a status of UNIT_TEST_ERROR_TEST_FAILED.
If ASSERT()s are disabled, then this check for ASSERT()
behavior is not possible, and the check is skipped.
The global variable gUnitTestExpectAssertFailureJumpBuffer
is added to the UnitTestLib to save/restore context when
the UT_EXPECT_ASSERT_FAILURE(FunctionCall, Status) macro
is used. The UT_EXPECT_ASSERT_FAILURE() macro uses the
SetJump() service with this global variable. The UnitTestLib
service UnitTestDebugAssert() uses the LongJump() service
with this global to restore context if an ASSERT() is
triggered by the code under test.
Add UnitTestExpectAssertFailure() to the UnitTestLib class.
The UnitTestExpectAssertFailure() is called from the new
UT_EXPECT_ASSERT_FAILURE() macro after the status of this
macro check is known.
Add UnitTestDebugAssert() to the UnitTestLib class. The
UnitTestDebugAssert() service is the same as the DebugLib
DebugAssert() service and is invoked from the DebugLib
_ASSERT() macro if unit testing is enabled. This allows the
Unit Test Framework to know when code under test triggers an
ASSERT() condition.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2801
Add UnitTestDebugAssertLib that provides the UnitTestDebugAssert()
service and the gUnitTestExpectAssertFailureJumpBuffer global
variable. This NULL library is linked against all host and target
unit test builds. This guarantees that the UnitTestDebugAssert()
service is available to link against all libraries and modules that
use the DebugLib class.
EDKII_UNIT_TEST_FRAMEWORK_ENABLED must always be defined when
building unit tests so the behavior of the DebugLib ASSERT()
macros can be adjusted to allow the unit test framework to
catch an ASSERT() if it is triggered by a function under test.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2805
If a unit test fails with an exception or an assert, then the
CmockaUnitTestFunctionRunner() is terminated and the logic
that follows the invocation of the unit test is skipped. This
currently skips the logic that prints log messages.
Move the print of log messages to the end of the function
CmockaUnitTestTeardownFunctionRunner() that is guaranteed to
be executed when a unit test completes normally or is
terminated with an exception or an assert.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2801
The default DebugLib for target mode was DebugLibNull. This
library instance disables all ASSERT() and DEBUG() macros
which removes the ability to write unit tests that check for
ASSERT() behaviors.
The DebugLib is changed to PeiDxeDebugLibReportStatusCode.inf
that guarantees that DEBUG() and ASSERT() macros are active. The
default ReportStatusCodeLib is set to BaseReportStatusCodeLibNull.inf
so no messages are sent to any devices preserving the DebugLibNull
behavior.
A platform specific unit test can always override these mappings
with a platform specific DebugLib.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2804
Optionally enable a feature to support source level debug of a
host based unit test. By default, this feature is disabled.
Exceptions are caught by the unit test framework and are
interpreted as a test failure.
When a unit test is under development, bugs may generate
exceptions or a unit test developer may want to trace the
execution of unit tests to debug some unexpected behavior.
Defining UNIT_TESTING_DEBUG in the DSC file or from the build
command line allows exceptions to be caught by the host OS
and allows the developer to debug their unit test under
development or debug the Unit Test Framework itself.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2800
Add a new version of BaseLib that is safe for use from host based
unit test applications. Host based unit test applications may need
to provide implementations of some BaseLib functions that provide
simple emulation to exercise the code under test. The structure
UNIT_TEST_HOST_BASE_LIB is filled in with services that provide
default emulation for BaseLib APIs that would normally generate
exceptions in a host based unit test application. This structure
allows an individual unit test to replace the default emulation of
a BaseLib service with an alternate version that is required by a
specific unit test. A global variable of type UNIT_TEST_HOST_BASE_LIB
is provided through the new UnitTestHostBaseLib library class.
Normally cmocka would be used to mock services the code under
test calls. However, the BaseLib is used by the Unit Test
Framework itself, so using a mocked interface is not possible.
The use of a structure to provide hooks for unit test is not
expected to be a common feature. It should only be required
for libraries that are used by both the Unit Test Framework and
the code under test where the code under test requires a
different behavior than the Unit Test Framework.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2823
The partition binding driver would run serval times during BDS.
If the partition support MBR, it would pass the first connection
in MBR partition child handler. The second connect for the same
device would return already started which would be treated as
not found. And it would continue to run next partition child
handler check. That is incorrect behavior to do next check if one
of the routine functions is passed. It may cause one device
installed serval partition child handle on it.
So treat the EFI_ALREADY_STARTED as EFI_SUCCESS to avoid incorrect
next partition child handle check.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2823
Refer to
http://manpages.ubuntu.com/manpages/bionic/man8/mkudffs.8.html.
Some Linux ISOs may have the MBR table for compatibility reasons
for Windows. The MBR tale would contain the partition entry with
start LBA0 and whole media size. There are two methods to check
the filesystem in the CD-ROM:
1. MBR partition check (Windows)
2. Whole disk check (MAC OS)
UEFI doesn't have the MBR check for UDF and Eltorito. But it may
pass the MBR check for such table and fail to detect the filesystem
of UDF. Skip the MBR check if the MBR is added for Windows
compatiblity so that the partition driver can continue UDF and
ElTorito check.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2823
PartitionValidMbr function's second parameter should be the
last sector of the device. For MBR partition, the block size is
sector size, i.e. 512 bytes. The original value is media block
last LBA which is counted by the media block size. And media
block size is not always 512 bytes, it may be larger which would
cause the MBR boundary check incorrect. The boundary check is
based on the partition entry start LBA and size of LBA which
are both counted by the sector number (512 bytes).
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2844
Update Reclaim() to return the error status from the reclaim
operation and not the status of SynchronizeRuntimeVariableCache()
that can be EFI_SUCCESS even through the status from reclaim
is an error. Without this change, the return status from
SetVariable() can be EFI_SUCCESS even though the variable was
not actually set. This occurs if the variable store is full
and a Reclaim() is invoked to free up space and even after all
possible space is freed, there is still not enough room for
the variable being set. This condition should return
EFI_OUT_OF_RESOURCES.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2849
MtrrSetFixedMtrr() sets all the fixed MTRR settings.
But in fact MtrrSetAllMtrrs() is always used by callers to set all
MTRR settings including the fixed and variable ones.
The patch removes the unnecessary API MtrrSetFixedMtrr()
to simplify the MtrrLib API.
There is no code in edk2 and edk2-platforms repo that calls
MtrrSetFixedMtrr().
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2849
MtrrSetVariableMtrr() sets all the variable MTRR settings.
But in fact MtrrSetAllMtrrs() is always used by callers to set all
MTRR settings including the fixed and variable ones.
The patch removes the unnecessary API MtrrSetVariableMtrr() to
simplify the MtrrLib API.
There is no code in edk2 and edk2-platforms repo that calls
MtrrSetVariableMtrr().
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2849
MtrrGetVariableMtrr() returns all the variable MTRR settings.
But in fact MtrrGetAllMtrrs() and
MtrrGetMemoryAttributeInVariableMtrr() are used by callers to get the
MTRR settings. The former one returns both the fixed and variable
MTRR settings.
The patch removes the unnecessary API MtrrGetVariableMtrr() to
simplify the MtrrLib API.
There is no code in edk2 and edk2-platforms repo that calls
MtrrGetVariableMtrr().
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
When build UEFI payload using NOOPT, it would build failure since
the FV size. So this patch increases FV size to support NOOPT.
If not NOOPT build, there is no change to FV size.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Refactor StandardSignatureIsAuthenticAMD into BaseUefiCpuLib from
separate copies in BaseXApicLib, BaseXApicX2ApicLib, and MpInitLib.
This allows for future use of StandarSignatureIsAuthinticAMD without
creating more instances in other modules.
This function allows IA32/X64 code to determine if it is running on an
AMD brand processor.
UefiCpuLib is already included directly or indirectly in all modified
modules. Complete move is made in this change.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Message-Id: <20200622131825.1352-4-Garrett.Kirkendall@amd.com>
In preparation for moving StandardSignatureIsAuthenticAMD to UefiCpuLib
in UefiCpuPkg, SourceLevelDebugPkg/SourceLevelDebugPkg.dsc needs
LibraryClass UefiCpuLib.
LocalApicLib|UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.inf will need
UefiCpuLib LibraryClass. Likely most "real" platforms will be using
BaseX2XApicLib instance which already required UefiCpuLib.
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Message-Id: <20200622131825.1352-3-Garrett.Kirkendall@amd.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
In preparation for moving StandardSignatureIsAuthenticAMD to UefiCpuLib
in UefiCpuPkg, PcAtChipset/PcAtChipsetPkg.dsc needs LibraryClass
UefiCpuLib.
LocalApicLib|UefiCpuPkg/Library/BaseXApicLib/BaseXApicLib.inf will need
UefiCpuLib LibraryClass. Likely most "real" platforms will be using
BaseX2XApicLib instance which already required UefiCpuLib.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Garrett Kirkendall <garrett.kirkendall@amd.com>
Message-Id: <20200622131825.1352-2-Garrett.Kirkendall@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
SetupGit.py sets the git config option diff.orderFile to
{edk2 directory}/BaseTools/Conf/diff.order, to override the default order
in which files are shown in a diff/patch/whatever. This is in imitation
of what is done manually in Laszlo's Unkempt Guide.
However, the version currently in the tree is in CRLF format, which makes
git interpret e.g. *.c as matching on *.c<CR>, finding no matches and
failing to apply the desired reordering. Note: this is true regardless of
whether running on Linux or Windows.
Convert the file to LF-only to make it work as expected.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add definition of EFI_SERIAL_TERMINAL_DEVICE_TYPE_GUID.
It was miseed in "Extend SERIAL_IO with DeviceTypeGuid" patch.
(UEFI 2.8, mantis 1832)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
On Debian 10 (Buster), when running PatchCheck.py with python2, a
backtrace is printed, starting from:
File "../edk2/BaseTools/Scripts/PatchCheck.py", line 595,
in find_patch_pieces
parts = email.header.decode_header(pmail.get('subject'))
AttributeError: 'module' object has no attribute 'header'
When using python3, this backtrace does not appear.
Explicitly importing email.header resolves this for python2 and does not
appear to cause any issues with python3.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
SetupGit.py adds BaseTools/Conf/diff.order as a diff orderfile, but that
file currently has CRLF line endings, which causes all pattern matches
to fail and the ordering remaining unaffected.
Add an exception to PatchCheck.py (to the existing .gitmodules clause),
so that we can merge the fix to the config file.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Using Python 3.7.2 on win32, when printing a FileBuildRule
instance, the following error occurs:
File "edk2\BaseTools\Source\Python\AutoGen\BuildEngine.py",
line 177, in __str__
DestString = ", ".join(self.DestFileList)
TypeError: sequence item 0: expected str instance, PathClass found
This patch converts each PathClass element of the list to a string
instance before concatenating them.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The AmlToHex script and Posix/WindowsLike wrappers convert
an AML file to a .hex file, containing a C array storing
AML bytecode. This ".hex" file can then be included in a
C file, allowing to access the AML bytecode from this C
file.
The EDK2 build system doesn't allow to a depict dependency
orders between files of different languages. For instance,
in a module containing a ".c" file and a ".asl", the ".c"
file may or may not be built prior to the ".asl" file.
This prevents any inclusion of a generated ".hex" in a
".c" file since this later ".hex" file may or may not
have been created yet.
This patch modifies the AmlToC script to generate a C file
instead of a ".hex" file.
It also adds the generation of an intermediate ".amli" file
when compiling an ASL file, and adds a rule to convert this
".amli" to a C file.
This allows to generate a C file containing the AML bytecode
from an ASL file. This C file will then be handled by the EDK2
build system to generate an object file.
Thus, no file inclusion will be required anymore. The C file
requiring the AML bytecode as a C array, and the ASL file,
will be compiled independently. The C array must be defined
as an external symbol. The linker is resolving the
reference to the C array symbol.
To summarize, the flow goes as:
-1. ASL file is compiled to AML;
-2. AML file is copied to a ".amli" intermediate file;
-3. EDK2 build system applies the rule relevant to ".amli"
files. This is, calling the "AmlToC" script, generating
a C file from the ".amli" file;
-4. EDK2 build system applies the rule relevant to C files.
This is creating an object file.
-5. EDK2 build system links the object file containing the
AML bytecode with the object file requiring it.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The AmlToHex script and Posix/WindowsLike wrappers convert
an AML file to a .hex file, containing a C array storing
AML bytecode. This ".hex" file can then be included in a
C file, allowing to access the AML bytecode from this C
file.
The EDK2 build system doesn't allow to a depict dependency
orders between files of different languages. For instance,
in a module containing a ".c" file and a ".asl", the ".c"
file may or may not be built prior to the ".asl" file.
This prevents any inclusion of a generated ".hex" in a
".c" file since this later ".hex" file may or may not
have been created yet.
This patch renames the script as AmlToC. It is posted as
a separate patch to prevent git from seeing the renaming
as a deletion plus addition of a new file.
The ending line of the posix-like bin-wrapper script has
also been corrected.
This is a first step toward generating a C file containing
the AML bytecode from an ASL file. This C file will then
be handled by the EDK2 build system to generate an object
file.
Thus, no file inclusion will be required anymore. The C file
requiring the AML bytecode as a C array, and the ASL file,
will be compiled independently. The C array must be defined
as an external symbol. The linker is resolving the
reference to the C array symbol.
To summarize, the flow goes as:
-1. ASL file is compiled to AML;
-2. AML file is copied to a ".amli" intermediate file;
-3. EDK2 build system applies the rule relevant to ".amli"
files. This is, calling the "AmlToC" script, generating
a C file from the ".amli" file;
-4. EDK2 build system applies the rule relevant to C files.
This is creating an object file.
-5. EDK2 build system links the object file containing the
AML bytecode with the object file requiring it.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This patch modifies the Makefile generation not to stop
adding Makfile rules when the first final target is found.
E.g.:
If the following rules are described in build_rule.txt:
-[Rule1]: .X files generate .Y and .Z files;
-[Rule2]: .Z files generate .Z1 files.
Currently, if a File1.X file was part of the sources of a
module, only [Rule1] would be generated in the Makefile.
Indeed, there are no rules to apply to .Y files: .Y files
are a final target. However, there is still [Rule2] to
apply to .Z files.
This patch also adds a dependency between the first
ouput file of a rule and the other output files.
For instance, with the same example as above, File1.Y
and File1.Z are generated by the following rule:
File1.Y: File1.X
<Generate File1.Y>
<Generate File1.Z>
and the new dependency is:
File1.Z: File1.Y
This is necessary to keep a dependency order during the
execution of the Makefile. Indeed, .Y and .Z files are
generated by the execution of a common set of commands,
and without this rule, there is no explicit dependency
relation between them.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Bash scripts require LF line endings to work.
PatchCheck.py checks that the files added in a patch have CRLF
line endings. It excludes files ending with the ".sh" extension
from this check.
Some bash script don't have a ".sh" extension. Most of them are
located in:
- BaseTools/BinWrappers/PosixLike/
- BaseTools/Bin/CYGWIN_NT-5.1-i686/
This patch excludes these folder plus BaseTools/BuildEnv from
this CRLF check.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
PL011UartLib determines its FIFO depth based on the PID2 value but
the register PID2 is not mandatory as per the SBSA spec.
This change won't check PID2 if PcdUartDefaultReceiveFifoDepth is set
to a value > 0.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Simple application wrapper that invokes the shell
command wrapper for 'acpiview'.
This allows the AcpiView functionality to be used
on platforms with older specifications of the UEFI
shell or where the 'acpiview' command is not built in
due to platform build configuration.
Furthermore, this app can be integrated into more comprehensive
testing frameworks as a single component of a more thorough
specification compliance validation strategy.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
The UefiShellAcpiViewCommandLib is converted from NULL library to a
named library so that it may be used in modules other than shell.
The library interface exposes the main method for to AcpiView
functionality as well as a helper method to dump a buffer to a file.
The Shell module is still built by pulling UefiShellAcpiViewCommandLib
as a NULL library to preserve the modularity of shell builds.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
Method is refactored into two parts. A new method is
created that dumps arbitrary buffers into a newly created
file. This method is called from core code after the core code
determined the appropriate filename to be used.
This improves the modular design.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
A new file and header (AcpiViewConfig.[ch]) is created
that houses the user configuration. This declutters the
core code and improves modularity of the design.
The module level symbols for verbosity, table selection, and
highlighting are refactored into the new file.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Tomas Pilar <tomas.pilar@arm.com>
While building with the following command line:
build -b DEBUG -a AARCH64 -t VS2017 -p MdeModulePkg\MdeModulePkg.dsc
A missing cast triggers the following warning, then triggering an error:
ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuLibCore.c(652):
warning C4152: nonstandard extension, function/data pointer
conversion in expression
This patch first casts the function pointer to (UINTN), then to (VOID *),
followowing the C99 standard s6.3.2.3 "Pointer", paragraphs 5 and 6.
This suppresses the warning.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Our UEFI guest firmware takes ownership of the emulated NOR flash in
order to support the variable runtime services, and it does not expect
the OS to interfere with the underlying storage directly. So disable
the NOR flash DT nodes as we discover them, in a way similar to how we
disable the PL031 RTC in the device tree when we attach our RTC runtime
driver to it.
Note that this also hides the NOR flash bank that carries the UEFI
executable code, but this is not intended to be updatable from inside
the guest anyway, and if it was, we should use capsule update to do so.
Also, the first -pflash argument that defines the backing for this flash
bank is often issued with the 'readonly' modifier, in order to prevent
any changes whatsoever to be made to the executable firmware image by
the guest.
This issue has become relevant due to the following Linux changes,
which enable the flash driver stack for default build configurations
targetting arm64 and 32-bit ARM.
ce693fc2a877
("arm64: defconfig: Enable flash device drivers for QorIQ boards", 2020-03-16).
5f068190cc10
("ARM: multi_v7_defconfig: Enable support for CFI NOR FLASH", 2019-04-03)
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Today's UefiPayloadPkg always uses 0xE0000000 as the PCIE base address
and ignores the value set in AcpiBoardInfo HOB created by the boot
loader. This makes the payload binary cannot work in environment
where the PCIE base address set by boot loader doesn't equal to
0xE0000000.
The patch enhances UefiPayloadPkg so that the PCIE base address
set by boot loader in the AcpiBoardInfo HOB is used.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
All public APIs should have EFIAPI modifier. Somehow PciSegmentInfoLib
missed the EFIAPI modifier.
The patch updates the library header file and NULL instance in MdePkg
to add the missing EFIAPI.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2776
Add a vector at 0xFF000 (0xFFFFF000) that can be used by Init-SIPI-SIPI
to start an AP before memory is initialized. This vector jumps into the
same SEC entry point as the ordinary reset vector, with a special value
of "AP" in the DI register. The platform-specific SEC code is expected
to check for that value and take a different path for APs, if this
feature is supported by the platform.
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Deric Cole <deric.cole@intel.com>
RestoreTPL called while at TPL_HIGH_LEVEL unconditionally enables
interrupts even if called in interrupt handler. That opens a window while
interrupt is not completely handled but another interrupt could be
accepted.
If a VM starts on a heavily loaded host hundreds of periodic timer
interrupts might be queued while vCPU is descheduled (the behavior is
typical for a Xen host). The next time vCPU is scheduled again all of them
get delivered back to back causing OVMF to accept each one without
finishing a previous one and cleaning up the stack. That quickly results
in stack overflow and a triple fault.
Fix it by postponing sending EOI until we finished processing the current
tick giving interrupt handler opportunity to clean up the stack before
accepting the next tick.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Message-Id: <1592275782-9369-1-git-send-email-igor.druzhinin@citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2815
Acked-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: add BZ ref; rewrap msg to silence PatchCheck.py]
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2786
In order to support enable/disable report status code through memory
or serial dynamic, change the following PCDs from [PcdsFeatureFlag] to
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]:
PcdStatusCodeUseSerial
PcdStatusCodeUseMemory
The original plaforms can use PcdsFixedAtBuild in .dsc files to save size.
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Ming Tan <ming.tan@intel.com>
The bounce buffering code in NonCoherentDmaLib copies data into the
bounce buffer using CopyMem(), but passes Map->HostAddress as the
source of the copy before it has been assigned its correct value.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
One of the side effects of the recent changes to PlatformBootManagerLib
changes to avoid connecting all devices on every boot is that we no
longer default to network boot on a virgin boot, but end up in the
UiApp menu. At this point, the UiApp will instantiate the autogenerated
boot options that we used to rely on as before, but since we are already
sitting idle in the root UiApp menu at that point, it does break the
unattended boot case where devices are expected to attempt a network
boot on the very first power on.
Let's work around this by refreshing all boot options explicitly in
the UnableToBoot() handler, and rebooting the system if doing so
resulted in a change to the total number of configured boot options.
This way, we ultimately end up in the UiApp as before if no boot
options could be started, but only after all the autogenerated ones
have been attempted as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andrei Warkentin <awarkentin@vmware.com>
This reverts commit ced77332ca.
The command
virt-install --location NETWORK-URL
downloads the vmlinuz and initrd files from the remote OS tree, and passes
them to the guest firmware via fw_cfg.
When used with IA32 / X64 guests, virt-install expects the guest firmware
to do two things, at the same time:
- launch the fw_cfg kernel image even if the latter does not pass SB
verification (SB checking is supposed to be bypassed entirely in favor
of the Linux/x86 Boot Protocol),
- still let the guest kernel perceive SB as enabled.
Commit ced77332ca prevented this, by removing the Linux/x86 Boot
Protocol from such an OVMF image that was built with SECURE_BOOT_ENALBE.
While that's the right thing in theory, in practice "virt-install
--location NETWORK-URL" is entrenched, and we shouldn't break it.
We can tolerate the Linux/x86 Boot Protocol as a one-of-a-kind SB bypass
for direct-booted kernels, because:
- the fw_cfg content comes from QEMU, and the guest is already at QEMU's
mercy,
- in the guest, OS boots after the initial installation will use "shim"
rather than an fw_cfg kernel, which we can consider somewhat similar to
"Audit Mode / Deployed Mode" (~ trust for install, lock down after).
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Message-Id: <20200615144514.24597-1-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[lersek@redhat.com: truncate the subject line, originally auto-generated
by git-revert, to pacify PatchCheck.py]
Apply PE/COFF fixups when starting up the standalone MM core, so that
it can execute at any address regardless of the link time address.
Note that this requires the PE/COFF image to be emitted with its
relocation section preserved. Special care is taken to ensure that
TE images are dealt with correctly as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The standalone MM core runs in a restricted environment that is set
up by a higher privilege level, and which may not allow memory regions
to be writable and executable at the same time.
This means that making the StMM core self-relocatable requires that
all the targets of the relocation fixups are outside of the executable
region of the image, given that we cannot remap the executable code
writable from the executable code itself without losing those execute
permissions.
So instead, use the existing toolchain support to ensure that position
independent code is used where possible, and that all the remaining
relocated quantities are emitted into the data section. (Note that
staticallly initialized const pointers will be emitted into the
.data.rel.ro section, which gets pulled into the .data section by
our linker script)
To ensure that we don't pick up any absolute references in executable
code inadvertently (e.g., in assembler code), add the '-z text' linker
option which will force the build to fail in this case.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
FvIsBeingProcessed () emits a DEBUG print with the intent to print
the memory address of the FV that is being processed, but instead,
it prints the contents of an uninitialized stack variable.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The mStatusString[] array is constructed as an array of pointer-to-char,
which means that on X64 or AARCH64, it is emitted as a single linear list
of 64-bit quantities, each containing the absolute address of one of the
string literals in memory.
This means that each string takes up 8 bytes of additional space, along
with 2 bytes of relocation data. It also means that extra work needs to
be done at runtime to process these relocations, every time a module is
loaded that incorporates this library.
So fix both issues, by splitting mStatusString into two arrays of char
arrays. The memory footprint decreases from 955 to 843 bytes, and given
that in the latter case, the overhead consists of 278 NUL characters rather
than 390 bytes worth of absolute addresses and relocation records, the size
of a compressed image is reduced even further. For example, when building
ArmVirtQemu.dsc in RELEASE mode for AARCH64 with the GCC5 profile, I get:
Before
FV Space Information
FVMAIN [100%Full] 5329920 total, 5329920 used, 0 free
FVMAIN_COMPACT [38%Full] 2093056 total, 811840 used, 1281216 free
After
FV Space Information
FVMAIN [100%Full] 5321728 total, 5321728 used, 0 free
FVMAIN_COMPACT [38%Full] 2093056 total, 809696 used, 1283360 free
So the uncompressed contents of the compressed image are 8 KB smaller,
whereas the resulting flash image (consisting of the compressed image
along with SEC, PEI_CORE and a set of PEIMs that execute in place) is
2 KB smaller.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We no longer use ELF PIE executables to implement the self-relocating
PrePi so drop the custom linker script and visibility override header
file.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Sami Mujawar <Sami.Mujawar@arm.com>
Instead of having a GCC specific routine to perform self-relocation
based on ELF metadata, use the PE/COFF metadata and the existing
PeCoff library routines. This reduces the amount of bespoke assembler
code that is a burden to maintain, and is not portable across the set
of toolchains we support.
This does require some special care, as we have no control over how
the C code references global symbols, so we need to emit these
references from the calling assembler code. Otherwise, they may be
emitted as absolute references, in which case they need to be fixed
up themselves, leading to a circular dependency.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Sami Mujawar <Sami.Mujawar@arm.com>
In preparation for making the self-relocating PrePi use the ordinary
BasePeCoffLib routines for relocating the image in place in memory
at start, add a special FDF rule that builds SEC modules as PE32
images with the relocation metadata preserved.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Sami Mujawar <Sami.Mujawar@arm.com>
Moved BlockCount calculation below BufferSize Validation checks.
First Ensure Buffersize is Not Zero and multiple of Media BlockSize.
then calculate BlockCount and perform Block checks.
Corrected BlockCount calculation, as BufferSize is multiple of BlockSize,
So adding (BlockSize-1) bytes to BufferSize and
then divide by BlockSize will have no impact on BlockCount.
Reading Large Images from MMC causes errors.
As per SD Host Controller Spec version 4.20,
Restriction of 16-bit Block Count transfer is 65535.
Max block transfer limit in single cmd is 65535 blocks.
Added Max Block check that can be processed is 0xFFFF.
then Update BlockCount on the basis of MaxBlock.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: "Loh, Tien Hock" <tien.hock.loh@intel.com>
The exception library is also used in DxeMain before memory services
are available, and AllocatePages() will fail in this case and cause
sp_el0 remains 0. Then if any exception occurs before CpuDxe driver is
loaded, a recursive exception will be trigged by page translation
fault for sp = 0 - 0x130.
Use static buffer instead to fix this issue.
Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2701
Recording to the spec, the reconnect is activated upon exiting of the
formset or the browser. Exiting is by user but form-browser internal
logic. That means the reconnection is only happened when user press
ESC or _EXIT action to exit form.
Driver callback may update HII form dynamically so form-browser needs
to refresh its internal data. It's not exiting formset for user
exactly and they didn't know what happened. So use a flag to record
that and do not reconnect driver if updated by callback.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Its been observed that in MenuManagerMenuApp when user
selects a different BootOption using Up/Down key, the
current Cursor position is not chaning.
Still points to the old BootOption.
This changes first dispalys/redraws the old BootOption
followed by new BootOption. Doing so will make current
cursor pointing to the user selected BootOption.
Signed-off-by: Abdul Lateef Attar <abdul@marvell.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
The following two section titles in "Maintainers.txt" are not in
(case-sensitive) lexicographical order:
> MdeModulePkg: ACPI modules
> MdeModulePkg: ACPI S3 modules
However, if we simply sorted them, we'd have another problem: the specific
"ACPI S3 modules" line would precede the generic "ACPI modules" line.
Therefore, slightly reformulate the title on the second section, in order
to establish both lexicographical and hierarchical order.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2778
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200603160627.3594-2-lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Commit 045e4b84c1 ("ArmPkg/ArmPkg.dsc: Add missing components")
adds some components to the ArmPkg.dsc build config, but it adds
them to Components.common, and MmCommunicationDxe is AArch64 only.
Move it to Components.AARCH64 to stop the ARM build breaking.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Michael Kubacki <michael.kubacki@microsoft.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
AutoGen manager/workers halt the progress when an error occurs but
doesn't propagate the error code to main and allows main exit with 0
and gets the build system unable to catch the occurrence of an error.
This change informs main with an error when a progress is halted and
helps main exit with 1.
Signed-off-by: Irene Park <ipark@nvidia.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
In order to avoid boot delays from devices such as network controllers
that may not even be involved in booting at all, drop the call to
EfiBootManagerConnectAll () from the boot path. It will be called by
UiApp, so when going through the menu, all devices will be connected
as usual, but for the default boot, it is really not necessary so
let's get rid of this.
Enumerating all possible boot options and creating Boot#### variables
for them is equally unnecessary in the default case, and also happens
automatically in UiApp, so drop that as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Without ConnectAll() being called on the boot path, the UEFI shell will
be entered with no block devices or anything else connected, and so for
the novice user, this is not a very accommodating environment. Now that
we have made the UiApp the last resort on boot failure, and made the
UEFI Shell accessible directly via the 's' hotkey if you really need
it, let's hide it as an ordinary boot option.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
UEFI boot options may exist but have the LOAD_OPTION_ACTIVE flag
cleared. This means that the boot option should not be selected
by default, but it does not mean it should be omitted from the
boot selection presented by the boot manager: for this purpose,
another flag LOAD_OPTION_HIDDEN exists.
Given that the latter flag exists solely for the purpose of omitting
boot options from the boot selection menu, and LOAD_OPTION_XXX flags
can be combined if desired, hiding inactive boot options as well is
a mistake, and violates the intent of paragraph 3.1.3 of the UEFI
specification (revision 2.8 errata A). Let's fix this by dropping
the LOAD_OPTION_ACTIVE check from the code that populates the boot
selection menu.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
As a last resort, drop into the UiApp application when no active boot
options could be started. Doing so will connect all devices, and so
it will allow the user to enter the Boot Manager submenu and pick a
network or removable disk option.
Note that this only occurs if even the default removable filepath
could not be booted (e.g., \EFI\BOOT\BOOTAA64.EFI on AArch64)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In preparation of hiding the UEFI Shell boot option as an ordinary
boot option, make sure we can invoke it directly using the 's'
hotkey. Without ConnectAll() having been called, this results in
a shell that may have no block devices or other things connected,
so don't advertise the 's' in the console string that is printed
at boot - for novice users, we will go through the UiApp which
connects everything first. For advanced use, having the ability
to invoke the UEFI shell without any devices connected may be an
advantage, so let's keep this behavior as is for now.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The way the BDS handles the short-form USB device path of the console
keyboard relies on USB host controllers to be locatable via their PCI
metadata, which implies that these controllers already have a PCI I/O
protocol installed on their handle.
This is not the case for non-discoverable USB host controllers that are
supported by the NonDiscoverable PCI device driver. These controllers
must be connected first, or the BDS will never notice their existence,
and will not enable any USB keyboards connected through them.
Let's work around this by connecting these handles explicitly. This is
a bit of a stopgap, but it is the cleanest way of dealing with this
without violating the UEFI driver model entirely. This ensures that
platforms that do not rely on ConnectAll() will keep working as
expected.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Supervisor Call instruction (SVC) is used by the Arm Standalone MM
environment to request services from the privileged software (such as
ARM Trusted Firmware running in EL3) and also return back to the
non-secure caller via EL3. Some Arm CPUs speculatively executes the
instructions after the SVC instruction without crossing the privilege
level (S-EL0). Although the results of this execution are
architecturally discarded, adversary running on the non-secure side can
manipulate the contents of the general purpose registers to leak the
secure work memory through spectre like micro-architectural side channel
attacks. This behavior is demonstrated by the SafeSide project [1] and
[2]. Add barrier instructions after SVC to prevent speculative execution
to mitigate such attacks.
[1]: https://github.com/google/safeside/blob/master/demos/eret_hvc_smc_wrapper.cc
[2]: https://github.com/google/safeside/blob/master/kernel_modules/kmod_eret_hvc_smc/eret_hvc_smc_module.c
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Follow the implementation from Unix host to implement SNP
EMU_IO_THUNK_PROTOCOL and EMU_SNP_PROTOCOL. The network IO driver is the
same one as Nt32. Please refer to NETWORK-IO Subproject for network Io
driver(SnpNt32Io.dll).
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Acked-by: Ray Ni <ray.ni@intel.com>
PlatformBootManagerLib now asserts at build time that the correct
terminal type is used, and so leaving it unset breaks the ArmPkg
DSC build. So fix that.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In the ArmPkg version of PlatformBootManagerLib, we construct a
serial device path based on the default settings for baud rate,
parity and the number of stop bits, to ensure that a serial console
is available even on the very first boot.
This assumes that PcdUartDefaultParity or PcdUartDefaultStopBits are
not set to '0', meaning 'the default', as there is no default for
these when constructing a device path.
So add a couple of STATIC_ASSERT()s to make sure that we catch this
condition, since it otherwise ignores the bogus device path silently,
which is rather tedious to debug,.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Replace the runtime ASSERT with the build time STATIC_ASSERT on the
check that ensures that the terminal type we use for the serial
console matches the one we explicitly add to the ConIn/ConOut/StdErr
variables.
This helps catch serial console issues early, even in RELEASE builds,
reducing the risk of ending up with no console at all, which can be
tricky to debug on bare metal.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Gary reports the GCC 10 will emit calls to atomics intrinsics routines
unless -mno-outline-atomics is specified. This means GCC-10 introduces
new intrinsics, and even though it would be possible to work around this
by specifying the command line option, this would require a new GCC10
toolchain profile to be created, which we prefer to avoid.
So instead, add the new intrinsics to our library so they are provided
when necessary.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Tested-by: Gary Lin <glin@suse.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Dating back to commits f5cb376703 and ddd34a8183, the
"ArmVirtPkg/ArmVirtQemu.dsc" platform includes the
"OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf" module when the TPM2_ENABLE
build flag is defined.
This was regressed in commit 8923699291, which added a Tpm12DeviceLib
dependency to Tcg2ConfigPei. "ArmVirtQemu.dsc" does not resolve that class
to any instance, so now we get a build failure:
> build.py...
> ArmVirtPkg/ArmVirtQemu.dsc(...): error 4000: Instance of library class
> [Tpm12DeviceLib] is not found
> in [OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf] [AARCH64]
> consumed by module [OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf]
The TPM-1.2 code in OvmfPkg/Tcg2ConfigPei is limited to a special use case
(a kind of physical TPM-1.2 assignment), and that has never applied to
"ArmVirtQemu.dsc".
Short-circuit the TPM-1.2 detection in the ARM/AARCH64 builds of
OvmfPkg/Tcg2ConfigPei, removing the Tpm12DeviceLib dependency.
Functionally, this patch is a no-op on IA32 / X64.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Simon Hardy <simon.hardy@itdev.co.uk>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2728
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200520225841.17793-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add bitmask to structure which gives a binary-inspectable mechanism to
determine if a capsule contains an authentication section or depex section.
(UEFI 2.8 errata a, mantis 2026)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add bitmask to structure which gives a binary-inspectable mechanism to
determine if a capsule contains an authentication section or depex section.
(UEFI 2.8 errata a, mantis 2026)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add bitmask to structure which gives a binary-inspectable mechanism to
determine if a capsule contains an authentication section or depex section.
(UEFI 2.8 errata a, mantis 2026)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Define Guid & data structure for EFI_RT_PROPERTIES_TABLE, designed
to be published by a platform if it no longer supports all EFI
runtime services once ExitBootServices() has been called by the OS.
(UEFI 2.8 errata a, mantis 2049)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Some OUT parameters in the specification were mistakenly marked as IN OUT.
"IN OUT" replaced with "OUT" in the following interfaces
EFI_BOOT_SERVICES.GetMemoryMap():MemoryMap
EFI_BOOT_SERVICES.LocateHandleBuffer():NoHandles
EFI_SIMPLE_POINTER_PROTOCOL.GetState():State
EFI_ABSOLUTE_POINTER_PROTOCOL.GetState():State
EFI_EDID_OVERRIDE_PROTOCOL.GetEdid():EdidSize and Edid
EFI_ATA_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_SD_MMC_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_EXT_SCSI_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():Image
(UEFI 2.8 errata a, mantis 2035)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Any new OVMF binary (containing commit d42fdd6f83, and built with
SMM_REQUIRE) is likely to reboot during its first boot, regardless of
whether the variable store is logically empty, or it contains a
MemoryTypeInformation variable from an earlier OVMF binary.
This "reboot on first boot after OVMF upgrade" occurs despite having
eliminated BS Code/Data tracking in earlier parts of this series. Meaning
that we've outgrown the bins of those memory types too that matter for SMM
security.
Eliminating said reboot will make an upgrade to edk2-stable202005 more
comfortable for users. Increase the defaults empirically. (The total
doesn't exceed 3MB by much.)
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2706
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200508121651.16045-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The previous patch has no effect -- i.e., it cannot stop the tracking of
BS Code/Data in MemTypeInfo -- if the virtual machine already has a
MemoryTypeInformation UEFI variable.
In that case, our current logic allows the DXE IPL PEIM to translate the
UEFI variable to the HOB, and that translation is verbatim. If the
variable already contains records for BS Code/Data, the issues listed in
the previous patch persist for the virtual machine.
For this reason, *always* install PlatformPei's own MemTypeInfo HOB. This
prevents the DXE IPL PEIM's variable-to-HOB translation.
In PlatformPei, consume the records in the MemoryTypeInformation UEFI
variable as hints:
- Ignore all memory types for which we wouldn't by default install records
in the HOB. This hides BS Code/Data from any existent
MemoryTypeInformation variable.
- For the memory types that our defaults cover, enable the records in the
UEFI variable to increase (and *only* to increase) the page counts.
This lets the MemoryTypeInformation UEFI variable function as designed,
but it eliminates a reboot when such a new OVMF binary is deployed (a)
that has higher memory consumption than tracked by the virtual machine's
UEFI variable previously, *but* (b) whose defaults also reflect those
higher page counts.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2706
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200508121651.16045-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Intel SDM introduces 6-levels for describing the CPU topology:
* Package
* Module
* Tile
* Die
* Core
* Thread
A PI spec ECR was submitted to enhance CPU_MP PPI/Protocol to
support returning such information through GetProcessorInfo().
An accordingly change was implemented and pushed to edk2-staging.
Now the PI spec has been published.
The patch is cherry-picked from edk2-staging to edk2.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Added EXTENDED_PROCESSOR_INFORMATION structure and supporting
structures and definitions. The intent is to support updated
topology layout for CPUs. (PI 1.7a Mantis 2071)
Signed-off-by: Robert Phelps <robert@ami.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Created new header file for the new EFI_DELAYED_DISPATCH_PPI PPI
(PI 1.7 Mantis 1891)
Signed-off-by: Robert Phelps <robert@ami.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Revision number defines and MACROs were incorrect for the current
version of the Specification (PI 1.7 Mantis 1892)
Signed-off-by: Robert Phelps <robert@ami.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Updated PiStatusCodes to reflect changes to PI 1.7 Specification
(PI 1.7 Mantis 1889)
Signed-off-by: Robert Phelps <robert@ami.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2696
* This library class provides platform specific services to support
dependency check during updating firmware image. Platform can perform
dependency check in platform specific manner by implementing its own
FmpDependencyCheckLib.
* Add FmpDependencyCheck instance to provide a sample of dependency
check. The sample instance only checks the dependency from capsule
image. The dependency from other FMP instances isn't checked here.
* Add NULL instance as an option to skip the dependency check.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Added Guids and structures, that defines the work flow to perform
capsule update using JSON objects.
(UEFI 2.8 mantis 1935)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Provided a mechanism for UEFI FW to identify and hand off bootable
NVDIMM namespaces to the OS by standardizing the EFI device path.
EFI device path for physical NVDIMM devices changed from an ACPI
_ADR device to an ACPI NVDIMM device for correctness.
(UEFI 2.8 mantis 1858)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Provided a mechanism for UEFI FW to identify and hand off bootable
NVDIMM namespaces to the OS by standardizing the EFI device path.
EFI device path for physical NVDIMM devices changed from an ACPI
_ADR device to an ACPI NVDIMM device for correctness.
(UEFI 2.8 mantis 1858)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
New ClassGuid EFI_HII_REST_STYLE_FORMSET_GUID is defined.
In question level, a new flag EFI_IFR_FLAG_REST_STYLE is defined.
(UEFI 2.8 mantis 1853)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
In question level, a new flag EFI_IFR_FLAG_REST_STYLE is defined.
(UEFI 2.8 mantis 1853)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
OVMF booting stops with the assert if built with Xcode on macOS:
Loading driver at 0x0001FAB8000 EntryPoint=0x0001FABF249 LinuxInitrdDynamicShellCommand.efi
InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 1F218398
ProtectUefiImageCommon - 0x1F218140
- 0x000000001FAB8000 - 0x0000000000008A60
ASSERT_EFI_ERROR (Status = Unsupported)
ASSERT LinuxInitrdDynamicShellCommand.c(378): !EFI_ERROR (Status)
The assert comes from InitializeHiiPackage() after an attempt to
retrieve HII package list from ImageHandle.
Xcode still doesn't support HII resource section and
LinuxInitrdDynamicShellCommand depends on it. Likewise 277a3958d9
("OvmfPkg: Don't include TftpDynamicCommand in XCODE5 tool chain"),
disable initrd command if built with Xcode toolchain
Fixes: ec41733cfd ("OvmfPkg: add the 'initrd' dynamic shell command")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200514134820.62047-1-r.bolshakov@yadro.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
OnigurumaIntrinsics.c is now not used. So the implement of function
'memcpy' is now not., which causes build failure with CLANG9 and
XCODE. I remove OnigurumaIntrinsics.c and move the necessary function
implement to OnigurumaUefiPort.c/h.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2698
To enhance FSP silicon initialization flexibility an optional
Multi-Phase API is introduced and FSP header needs update for
new API offset. Also new SecCore module created for
FspMultiPhaseSiInit API
New ARCH_UPD introduced for enhancing FSP debug message
flexibility now bootloader can pass its own debug handler
function pointer and FSP will call the function to handle
debug message.
To support calling bootloader functions, a FspGlobalData field
added to indicate if FSP needs to switch stack when FSP running
on separate stack from bootloader.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Update the reference to MM communicate to refer to the MM communicate 2
protocol instead. This makes no difference for the MM side of the
implementation, but is more accurate nonetheless, since the original MM
protocol does not work in combination with standalone MM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Implement the new MmCommunication2 protocol which supports the use
of standalone MM at runtime inside an address space that has been
virtually remapped by the OS.
Note that the implementation of the old MM Communicate protocol is
removed: it never worked correctly so there is no point in keeping it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The MM communicate 2 protocol was introduced to factor out the mismatch
between traditional MM, which requires the physical address of the MM
buffer to be passed, and standalone MM, which copies the MM communicate
buffer data into a separate buffer, requiring the virtual address. For
this reason, MM communicate 2 carries both addresses, allowing the
implementation to decide which address it needs.
This hides this implementation detail from the callers of the protocol,
which simply passes both addresses without having to reason about what the
implementation of the protocol actually needs.
Note that the old version of the protocol is retained, in order to support
existing implementations that don't require this flexibility.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add the protocol definition of the MM communicate 2 protocol,
which has been introduced by version 1.7 errata A of the PI spec.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
GetMaintainer.py already extracts the value of any S: tags for sections,
but it doesn't do anything with that information.
Print a warning message, with the status, for each matching section with
a status explicitly set to anything other than 'Supported' or
'Maintained'.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Allow users who didn't clone one of the TianoCore repos from a
canonical URL to specify the name of the repo (edk2, edk2-platforms
or edk2-non-osi) when running SetupGit.py to allow them to configure
their repo properly.
The new option is:
-n repo, --name repo set the repo name to configure for, if not
detected automatically
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
For Arm-based platforms, count the instances of installed tables for
each ACPI table listed as 'mandatory' in any Server Base Boot
Requirements (SBBR) specification.
Validate that the all the mandatory SBBR tables present. Report an error
for each missing table.
This new feature is optional and can be enabled with the -r command line
parameter.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For Arm-based platforms, define and implement an interface for Server
Base Boot Requirements (SBBR) compliance checks. The library is
responsible for validating that all mandatory ACPI tables are installed
on the platform.
Internally, the library maintains a data structure which tracks
instance counts for ACPI tables which are labeled as 'mandatory' in any
SBBR specification version. The provided interface allows:
- resetting all instance counts to 0
- incremementing the instance count for a table with a given signature
- validating the instance counts against the requirements in SBBR
The ACPI table requirements for each SBBR spec version are represented
internally as a list of table signatures.
Every missing mandatory table (for the input SBBR version) is reported
to the user as a separate error. If all requirements are met, an info
message is displayed.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Define a new command line parameter '-r' to enable checking if all
mandatory ACPI tables listed in a specification are present.
The -r parameter takes an integer value to specify which specification
the validation should be performed against.
The parameter is used to set two Acpiview variables. An interface to
access these variables is implemented in this patch.
The new functionality is aimed at Arm-based platforms, however,
there are no restriction on extending it to other architectures.
For the 32-bit and 64-bit Arm architectures, the possible values for
the -r parameter are:
0: Arm Server Base Boot Requirements 1.0, March 2016
1: Arm Server Base Boot Requirements 1.1, May 2018
2: Arm Server Base Boot Requirements 1.2, September 2019
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Some driver were recently moved to edk2-platforms, but the DSC file
in EmbeddedPkg still refers to them. Drop these references.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The controller supports up to 8 targets in practice (Not reported by the
controller, but based on the implementation of the virtual device),
report them in GetNextTarget and GetNextTargetLun. The firmware will
then try to communicate with them and create a block device for each one
that responds.
Support for multiple LUNs will be implemented in another series.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200504210607.144434-7-nikita.leshchenko@oracle.com>
The PL180 SD host controller driver is only used on emulated ARM
platforms, uses an obsolete version of the MMC host protocol and
does not adhere to the UEFI driver model.
It has been moved into edk2-platforms alongside the only platforms
that use it, so we can drop it from the EDK2 core repository.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The ISP 1716 USB host controller driver does not implement the UEFI
driver model, and is not a suitable example for new drivers to be
based on. Also, it is currently only used on a limited set of ARM
development platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The SiI3132 SATA controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Lan9118 network controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Lan91x network controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Synopsys DesignWare eMMC host controller driver does not implement
that SD/MMC host controller protocol that the UEFI spec defines, but an
obsolete EDK2-specific one that predates it. It also does not implement
the UEFI driver model.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In EDK2, identifiers carrying the EFI prefix are reserved for ones
that are defined in the UEFI or PI specifications.
Since the MMC host protocol defined in EmbeddedPkg is not the one that
the UEFI spec defines, and given the confusion around this, let's rename
it to from gEfiMmcHostProtocolGuid to gEmbeddedMmcHostProtocolGuid.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The device manager UI library creates a UiApp submenu that contains a
list of network devices in the system. The logic that creates this menu
assumes that all handles have been connected to their drivers, but this
is not guaranteed in the general case: due to the way UiApp is constructed,
this logic runs before the UiApp entrypoint is invoked, which is where
ConnectAll() is normally called to ensure that all existing controllers
are connected to their drivers. Moving this call into DeviceManagerUiLib
is not an option, since it is incorporated into UiApp via NULL library
class resolution, and so it may not be included to begin with.
So work around this by doing an explicit additional ConnectAll() before
populating the pages.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Link: https://edk2.groups.io/g/devel/topic/72879609#57075
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2683
In PEI phase, AP already been waked up through ApInitConfig,
so it can directly wake up it through change wakup buffer
instead of use ApInitReconfig flag. It can save some time.
Change code to only use ApInitReconfig flag in DXE phase
which must need to update the wake up buffer.
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2683
This patch fixes an assertion because AP can't find the CpuMpData.
When AP is waken up through Init-Sipi-Sipi, AP's IDT should
be restored to pre-allocated buffer so AP can get the CpuMpData
through the IDT base address.
Current code already has logic to handle this when CpuMpData->
InitFlag is ApInitConfig but misses the logic
when CpuMpData->InitFlag is ApInitReconfig.
This patch fixes this gap.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Add a minimal, NULL class library called "PxeBcPcdProducerLib" for setting
the "PcdIPv4PXESupport" and "PcdIPv6PXESupport" PCDs of NetworkPkg, from
fw_cfg.
These PCDs control whether the UefiPxeBcDxe driver supports PXEv4 / PXEv6
boot. If a PXE version is disabled, the corresponding LoadFile protocol
instance is not produced by UefiPxeBcDxe, and so
EfiBootManagerRefreshAllBootOption() in UefiBootManagerLib does not
generate corresponding *new* boot options either. (Existent boot options
are not deleted.)
Hook the library into the UefiPxeBcDxe driver. (The driver is already
included from "NetworkComponents.dsc.inc", but we can list it again in the
DSC file, for providing <LibraryClasses> overrides.)
In OVMF, the PCDs could be set in PlatformPei too, but ArmVirtQemu does
not have fw_cfg access in the PEI phase. Hence a NULL class library that
can be linked into UefiPxeBcDxe.
When listing the PCDs under [PcdsDynamicDefault], stick with the DEC
default values.
QEMU switches:
-fw_cfg name=opt/org.tianocore/IPv4PXESupport,string=[yn]
-fw_cfg name=opt/org.tianocore/IPv6PXESupport,string=[yn]
The "opt/org.tianocore" prefix follows the "opt/RFQDN/" recommendation
from QEMU's "docs/specs/fw_cfg.txt".
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-6-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Introduce DEBUG_ON_HYPERVISOR_CONSOLE build flag to enable logging
debug output to the Xen console.
This will work with both Xen HVM guest and Xen PVH guest whereas the
default PlatformDebugLibIoPort works only in HVM when QEMU is present.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200423095358.2518197-6-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove support for DEBUG_ON_SERIAL_PORT because OvmfXen can't be build
with it due to a circular dependency:
DebugLib : BaseDebugLibSerialPort ->
SerialPortLib : XenConsoleSerialPortLib ->
XenHypercallLib : XenHypercallLib ->
DebugLib
Also, if that dependency is fixed, I think it would be harder to find
which console the debug is sent to when running an HVM guest. The xen
console isn't the serial console used by default. Furthermore,
XenHypercallLib isn't initialised early enough, so we would loose
debug output from the SEC phase and early PEI phase.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200423095358.2518197-2-anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2632
Both PEI and DXE instances of the MpInitLib are using PcdLib APIs, but
none of them list the dependency of the PcdLib in INF & header files.
This commit will explicitly add such dependency in .H and .INF files.
Test done:
Library level build pass for VS2015x86 tool chain
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2654
If FV is placed in FD region, its FV image size is fixed.
When FV image size exceeds it, it will trig the build break.
To alert the developer to adjust FV image size earlier,
I request to add new checker for the the spare FV space.
When the spare FV space is less than the specified threshold,
build tool will report the error.
This checker is the optional.
It can be enabled by -D FV_SPARE_SPACE_THRESHOLD=10000.
Macro is the value of the spare space threshold size.
It can be decimal or hex format. If it is enabled,
BaseTools will check every FV with the fixed size.
If FV doesn't meet with the size requirement,
Build tool will report error message to say there is no
enough spare space.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The BaseResetSystemLib instance is not suitable for OS runtime, because
its ResetShutdown() implementation calls PciRead16 (OVMF_HOSTBRIDGE_DID).
On q35, this boils down to a memory-mapped config space access -- but we
never ask the OS to map MMCONFIG for runtime.
There are at least three alternatives to approach this:
(1) Investigate "MdePkg/Library/DxeRuntimePciExpressLib", which offers
some kind of runtime mapping for MMCONFIG.
(2) Consume PciCf8Lib directly, rather than PciLib, in ResetSystemLib.
Then we'll read OVMF_HOSTBRIDGE_DID from the config space with IO port
accesses on q35 too, not just on i440fx. IO ports don't depend on page
tables.
(3) In the lib constructor, cache "mAcpiPmBaseAddress" based on
"PcdOvmfHostBridgePciDevId" (which is set by PlatformPei). Then the
host bridge type will be known at runtime without PCI config space
accesses.
This patch follows approach (3), in order to mirror AcpiTimerLib.
Notes:
* This patch is best viewed with "git show --find-copies-harder -C43".
* PCDs are not usable in the DXE_CORE, as the PCD PPI is gone, and the PCD
protocol is not available yet. (The DXE_CORE does consume ResetSystemLib
in practice, when OVMF is built with -D SOURCE_DEBUG_ENABLE.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
[lersek@redhat.com: move third Note (with repro info) to BZ comment]
Move the ResetShutdown() definition to its own file. This will help us
introduce:
- a new library instance that is not broken in runtime modules (the
current library instance is broken in runtime modules),
- another new library instance for bhyve support.
While at it, squash AcpiPmControl() into ResetShutdown(), open-coding
SuspendType=0. This is justified because we've had no other callers for
AcpiPmControl() since commit 2d9950a2bf ("OvmfPkg: remove
EnterS3WithImmediateWake () from ResetSystemLib", 2020-01-10).
Tested with the "reset -s" UEFI shell command, on both i440fx and q35.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-5-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Annotate the #include directives with the interfaces that this lib
instance needs from the included lib class headers. This will help us keep
the #include set minimal, when we move code around later.
While at it, synchronize the [LibraryClasses] section with the #include
directives -- list BaseLib.
Also #include the ResetSystemLib class header, which declares the
interfaces that this lib instance implements.
This forces us to spell out the "MdeModulePkg.dec" dependency too, under
[Packages].
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
This reverts commit e069278905.
The default value for PcdAcpiExposedTableVersions is now set to 0x20
for Aarch64 systems. Setting this PCD in ArmVirtPkg/ArmVirtQemu.dsc
is no longer necessary.
Signed-off-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the default value of PcdAcpiExposedTableVersions for Aarch64
platforms to 0x20. Previously, the default was set to 0x3E for all
platforms. The new value removes ACPI 1.0b compatability, which forces
the use of XSDT 64-bit pointer, as required by Arm SBBR specification.
This also resolves an error reported by acpiview command, as seen on
the RPi (see https://github.com/pftf/RPi4/issues/25).
Signed-off-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2665
ReportDispatcher() is called by a software module to report a status code.
The interface is generic and can be called frequently throughout the boot
under various conditions. A certain set of conditions can cause the
currently implemented algorithm for resource exhaustion to fail. A sample
scenario:
1. ReportStatusCode() is called at a TPL higher than one of the registered
status code listeners making the call to the listener deferred until
TPL is lowered.
2. Additional calls to ReportStatusCode() occur, so the data buffer
continues to expand.
3. A call to ReportStatusCode() is made from within a memory allocation
call (e.g. CoreAllocatePoolPages ()) which is protected from re-
entrancy with mPoolMemoryLock. This will cause the ReallocatePool()
call in ReportDispatcher() to fail. Because the end pointer was already
moved to account for the data size, the end pointer is now moved
beyond the buffer and invalid.
This commit saves the original end pointer value into a local variable
called "FailSafeEndPointer" which tracks a safe end pointer to revert to
in the case the allocated buffer size (CallbackEntry->EndPointer -
CallbackEntry->StatusCodeDataBuffer) is still not large enough for the
data.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Kun Qin <Kun.Qin@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1562
The current SnpDxe implementation registers its ExitBootServices event
notification function (SnpNotifyExitBootServices ()) at TPL_NOTIFY. This
function calls PxeShutdown() which issues an UNDI shutdown operation.
Ultimately, this may invoke Shutdown() in EFI_SIMPLE_NETWORK_PROTOCOL.
The UEFI specification 2.8A Table 27 "TPL Restrictions" restricts the
TPL
for Simple Network Protocol to <= TPL_CALLBACK. In addition, it has been
observed in some 3rd party UNDI drivers to cause an issue further down
the call stack if the TPL is higher than TPL_CALLBACK on invocation.
Therefore, this commit changes the TPL of SnpNotifyExitBootServices() to
TPL_CALLBACK.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
The ACPI specification, version 6.3, January 2019,
defines the Named Objects Encoding for FieldElements
in section '20.2.5.2 Named Objects Encoding'.
FieldElements can be one of the following:
NamedField | ReservedField | AccessField |
ExtendedAccessField | ConnectField
Some of these keywords are starting with an opcode,
allowing to identify their type.
E.g.: ReservedField := 0x00 PkgLength
This patch adds these FieldElement opcodes definitions to
the list of AML Opcode definitions.
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
NonDiscoverablePciDeviceDxe currently #defines the module-internal
PCI_MAX_BARS macro, with value 6 (and type "int").
Remove this private macro definition, and adopt PCI_MAX_BAR from
"MdePkg/Include/IndustryStandard/Pci22.h". Both the value and the type
remain unchanged (the standard PCI_MAX_BAR macro expands to 0x0006).
"NonDiscoverablePciDeviceIo.h" gets the definition of PCI_MAX_BAR via its
existent #include <IndustryStandard/Pci.h> directive.
Build-tested only.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200409113017.18233-1-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1548
For clang compiler, This change will make the generated image not include the
absolute file path. If so, the generated debug image can be reproduced in the
different root directory. Also, it will reduce the size of debug image size.
To do so, use __FILE_NAME__ macro to replace __FILE__. __FILE_NAME__ is
Clang-specific extension that functions similar to __FILE__ but only renders
the last path component (the filename) instead of an invocation dependent full
path to that file, and __FILE_NAME__ is introduced since clang 9.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
After remove Used parameter, below code in ResetTokens can also be
removed:
1. The RunningApCount parameter will be reset in GetFreeToken.
2. The ReleaseSpinLock should be called in ReleaseToken function,
Code in this function seems like a later fix if ReleaseToken not
Release it. We should remove code here and fix the real issue if
existed.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Today's GetFreeToken() runs at the algorithm complexity of O(n)
where n is the size of the token list.
The change introduces a new global variable FirstFreeToken and it
always points to the first free token. So the algorithm complexity
of GetFreeToken() decreases from O(n) to O(1).
The improvement matters when some SMI code uses StartupThisAP()
service for each of the AP such that the algorithm complexity
becomes O(n) * O(m) where m is the AP count.
As next steps,
1. PROCEDURE_TOKEN.Used field can be optimized out because
all tokens before FirstFreeToken should have "Used" set while all
after FirstFreeToken should have "Used" cleared.
2. ResetTokens() can be optimized to only reset tokens before
FirstFreeToken.
v2: add missing line in InitializeDataForMmMp.
v3: update copyright year to 2020.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Enable support for NVMe storage in ArmVirtQemu/QemVirtQemuKernel in order
to simplify booting/installing operating systems that don't support
virtio.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2628
This patch reduces the size of IA32 binaries by ensuring that
no .debug_frame / .eh_frame sections are generated through forcing
SEH exception model, which is already the default in clang for X64.
EDK II does not support exceptions, and in future we should disable
them instead of switching to some other variant. Currently this
is not possible due to the following LLVM bugs:
https://bugs.llvm.org/show_bug.cgi?id=45324https://bugs.llvm.org/show_bug.cgi?id=45325
Upon applying this patch OvmfPkgIA32.dsc compilation in DEBUG mode
gets the following size decrease with clang 9.0.1.
Before: FV Space Information
SECFV [11%Full] 212992 total, 24512 used, 188480 free
PEIFV [22%Full] 917504 total, 203048 used, 714456 free
DXEFV [36%Full] 11534336 total, 4215672 used, 7318664 free
FVMAIN_COMPACT [37%Full] 3440640 total, 1287776 used, 2152864 free
After: FV Space Information
SECFV [10%Full] 212992 total, 22112 used, 190880 free
PEIFV [19%Full] 917504 total, 176392 used, 741112 free
DXEFV [31%Full] 11534336 total, 3657112 used, 7877224 free
FVMAIN_COMPACT [33%Full] 3440640 total, 1153896 used, 2286744 free
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marvin H?user <mhaeuser@outlook.de>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2062
This commit makes the behavior for PeiGetVariable() match the following
specification-defined behavior. It is now consistent with the DXE/SMM
variable driver implementation.
The UEFI specification v2.8 Errata A Section 8.2 "GetVariable()"
"Attributes" parameter description states:
"If not NULL, a pointer to the memory location to return the
attributes bitmask for the variable. See 'Related Definitions.'
If not NULL, then Attributes is set on output both when
EFI_SUCCESS and when EFI_BUFFER_TOO_SMALL is returned."
The attributes were previously only returned from the implementation
in Variable.c on EFI_SUCCESS. They are now returned on EFI_SUCCESS or
EFI_BUFFER_TOO_SMALL according to spec.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2062
The UEFI specification v2.8 Errata A Section 8.2 "GetVariable()"
"Attributes" parameter description states:
"If not NULL, a pointer to the memory location to return the
attributes bitmask for the variable. See 'Related Definitions.'
If not NULL, then Attributes is set on output both when
EFI_SUCCESS and when EFI_BUFFER_TOO_SMALL is returned."
The attributes were previously only returned from the implementation
in Variable.c on EFI_SUCCESS. They are now returned on EFI_SUCCESS or
EFI_BUFFER_TOO_SMALL according to spec.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The local #define TT_ATTR_INDX_INVALID is used as a local error code
in the AArch64 implementation, but is misleadingly named to match the
definitions in ArmPkg/Include/Chipset/AArch64Mmu.h.
Rename it INVALID_ENTRY to reduce confusion and improve readability.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
TT_ATTR_INDX_INVALID is #define'd but never used so drop it. Note
that this leaves a CPP macro of the same name in CpuDxe, but there,
it is actually being used, and although the name suggests that this
value is somehow defined by the architecture, this is really not the
case and it only has meaning within the scope of CpuDxe's implementation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Only a single call to GetRootTranslationTableInfo() remains, which
only provides the root table level. So let's create a new static
helper function that returns just this value, and use it instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
LookupAddresstoRootTable() uses a loop to go over its MaxAddress
argument, essentially to do a log2() and determine how many bits are
needed to represent it. Since the argument is the result of a shift-left
expression, there is some room for improvement here, and we can simply
use the bit count directly to calculate the value of T0SZ. At the same
time, we can omit calling GetRootTranslationTableInfo() to determine the
number of root table entries, and add a new helper that applies the
trivial calculation directly.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The routine PageAttributeToGcdAttribute() is exported by ArmMmuLib
but only ever used in the implementation of CpuDxe. So let's move
the function there and make it STATIC.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Before getting rid of GetRootTranslationTableInfo() and the related
LookupAddresstoRootTable() in AARCH64's version of ArmMmuLib, add a
version of the former to CpuDxe, which will be its only remaining
user. While at it, simplify it a bit, since in the CpuDxe cases,
both OUT arguments are always provided.
Note that this removes the declaration of GetRootTranslationTableInfo()
as well, but this is a declaration that is private to CpuDxe, and it
really doesn't belong here in the first place. Since ArmMmuLib's version
of GetRootTranslationTableInfo() is going to be replaced shortly anyway,
don't bother moving this .h declaration elsewhere.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Previous to this change, PvScsiFreeRings() was not undoing all
operations that was done by PvScsiInitRings().
This is because PvScsiInitRings() was both preparing rings (Allocate
memory and map it for device DMA) and setup the rings against device by
issueing a device command. While PvScsiFreeRings() only unmaps the rings
and free their memory.
Driver do not have a functional error as it makes sure to reset device
before every call site to PvScsiFreeRings(). However, this is not
intuitive.
Therefore, prefer to refactor the setup of the ring against device to a
separate function than PvScsiInitRings().
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331225637.123318-1-liran.alon@oracle.com>
[lersek@redhat.com: rename FreeDMACommBuffer label to FreeDmaCommBuffer]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Sean reported that VS2019 build produce the following build error:
INFO - PvScsi.c
INFO - Generating code
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): error C2220: the
following warning is treated as an error
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): warning C4244: '=':
conversion from 'const UINT16' to 'UINT8', possible loss of data
This result from an implicit cast from PVSCSI Response->ScsiStatus
(Which is UINT16) to Packet->TargetResponse (Which is UINT8).
Fix this issue by adding an appropriate explicit cast and verify with
assert that this truncation do not result in loss of data.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2651
Reported-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331110452.51992-1-liran.alon@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: rewrap VS2019 diags in commit msg for PatchCheck.py]
Laszlo suggested that as I have contributed the OvmfPkg PVSCSI driver, I
will also register myself as a reviewer in Maintainers.txt.
In addition, as Nikita have assisted the development of the PVSCSI
driver and have developed another similar OvmfPkg SCSI driver, add him
as a reviewer to PVSCSI driver as-well.
Cc: Nikita Leshenko <nikita.leshchenko@oracle.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331110244.51409-1-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
[lersek@redhat.com: fixup "F:" pattern by appending slash character]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When DHCP is misconfigured on a network segment, such that two DHCP
servers attempt to reply to requests (and therefore race with each other),
the edk2 PXE client can confuse itself.
In PxeBcDhcp4BootInfo() / PxeBcDhcp6BootInfo(), the client may refer to a
DHCP reply packet as an "earlier" packet from the "same" DHCP server, when
in reality both packets are unrelated, and arrive from different DHCP
servers.
While the edk2 PXE client can do nothing to fix this, it should at least
not ASSERT() -- ASSERT() is for catching programming errors (violations of
invariants that are under the control of the programmer). ASSERT()s should
in particular not refer to external data (such as network packets). What's
more, in RELEASE builds, we get NULL pointer references.
Check the problem conditions with actual "if"s, and return
EFI_PROTOCOL_ERROR. This will trickle out to PxeBcLoadBootFile(), and be
reported as "PXE-E99: Unexpected network error".
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200331004749.16128-1-lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2032
'ping' command's receive flow utilizes a single Rx token which it
attempts to reuse before recycling the previously received packet.
This causes a situation where under ICMP traffic,
Ping6OnEchoReplyReceived() function will receive an already
recycled packet with EFI_SUCCESS token status and finally
dereference invalid pointers from RxData structure.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported for the Status variable in
AddGenericInitiatorAffinity() as it is not initialised
to a default value. This condition is only valid if
GenInitAffCount is equal to 0. Since GenInitAffCount
is already checked in BuildSratTable() this condition
can never happen.
The value of the Status variable is returned in
failure cases from appropriate locations in
AddGenericInitiatorAffinity(). The only case
where Status value is being used un-initialised
is the return statement at the end of
AddGenericInitiatorAffinity().
Therefore, to fix this issue EFI_SUCCESS can be
safely returned instead of returning the Status
variable at the end of the function.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the SRAT Generator modules.
Remove the CONST qualifier for the ImageHandle and the
SystemTable pointer in the library constructor and destructor
to make it compatible with the formal declaration.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2538
For LzmaCompress or BrotliCompress, the platform may use the different
options and add their batch file, such as LzmaCompressPlatform.
Then, specify it in platform.dsc [BuildOptions] to override the default
one in tools_def.txt.
*_*_*_LZMA_PATH = LzmaCompressPlatform
This override tool will be used. But, its name is not specified in the
generated GuidedSectionTools.txt.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In case device is constrained by IOMMU or guest is running under AMD SEV,
input/output buffers provided to device (DataBuffer and SenseData) needs
to be explicitly mapped to device by PciIo->Map().
To avoid the overhead of mapping/unmapping the DataBuffer and SenseData
to the device for every SCSI requst (and to simplify code), introduce a
single DMA communication buffer that will be mapped to device on
initialization. When a SCSI request needs to be sent to device, the
DataBuffer and SenseData will be copied from/to the DMA communication
buffer as required. This will be done by the following commits.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-15-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement EXT_SCSI_PASS_THRU.GetNextTarget() and
EXT_SCSI_PASS_THRU.GetNextTargetLun().
ScsiBusDxe scans all MaxTarget * MaxLun possible devices.
This can take unnecessarily long for large number of targets.
To deal with this, VirtioScsiDxe has defined PCDs to limit the
MaxTarget & MaxLun to desired values which gives sufficient
performance. It is very important in virtio-scsi as it can have
very big MaxTarget & MaxLun.
Even though a common PVSCSI device has a default MaxTarget=64 and
MaxLun=0, we implement similar mechanism as virtio-scsi for completeness.
This may be useful in the future when PVSCSI will have bigger values
for MaxTarget and MaxLun.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-7-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
ACPI 6.3 added a 16-bit SPE overflow Interrupt field, replacing
2 of the 3 reserved bytes that are defined at the end of the
GICC structure for 6.0.
Add a new macro to initialise the new field.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Building OVMF for X64 with secure boot enabled on VS2019 results in
the following error:
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
error C2220: the following warning is treated as an error
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
warning C4244: '=': conversion from 'UINTN' to 'UINT32', possible loss of data
Suppress the error by making the cast explicit.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2636
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Dynamic Tables Factory protocol has an erroneous
EFIAPI calling convention macro in the function
pointer declaration.
Remove the erroneous EFIAPI calling convention macro
from the interface declarations.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4267: 'return': conversion
from 'size_t' to 'UINT32', possible loss of data' for a number of
functions that compute the IORT node length. Similarly, it reports
warnings for IORT node length field assignments as the length
field is 16-bit wide.
This patch adds type casts at appropriate places and also implements
validations to ensure that the max width of the respective fields
is not exceeded.
This patch also fixes a typo in one of the local variable names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Removing GT Block frame count check from AddGTBlockTimerFrames()
as this is already validated in BuildGtdtTable().
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ARM DCC serial port subtype is an option that is
supported by the DBG2 generator. However, the serial
port initialisation should only be done for PL011/SBSA
compatible UARTs.
Add check to conditionally initialise the serial port.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The VS2017 compiler reports 'warning C4366: The result of
the unary '&' operator may be unaligned' if an address of
an unaligned structure member is passed as an argument to
a function.
Fix this warning by using local variables in place of
unaligned structure members.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4244: '=': conversion from
'const UINT32' to 'UINT8', possible loss of data' when the ACPI
table revision field is being updated.
The width of the revision field in the EFI_ACPI_DESCRIPTION_HEADER
struct is 8-bit wide. Therefore, to fix the above warning make the
ACPI Table revision field usage 8-bit wide across Dynamic Tables
Framework.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ArmBootArch field of the FADT table is 16-bit wide. The
VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT16', possible loss of data' when assigning the
CM_ARM_BOOT_ARCH_INFO.BootArchFlags value as the width of this
field in CM_ARM_BOOT_ARCH_INFO is 32-bit wide.
To fix this warning, update the CM_ARM_BOOT_ARCH_INFO struct
to make the BootArchFlags field 16-bit wide. This also makes
it compatible with the ACPI FADT specification.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4267: '=': conversion from
'size_t' to 'UINT16', possible loss of data'.
The sizeof() operator is used to calculate the size of the
GT Block structure. The length field in the GT Block structure
is 16-bit wide. Since the return type of sizeof() operator
is size_t the VS2017 compiler reports the above warning.
To fix the warning, an explicit type cast is added. An additional
check is also performed to ensure that the calculated GT Block
length does not exceed MAX_UINT16.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The length field for the Processor Hierarchy node structure is
8-bit wide while the number of private resource field is 32-bit
wide. Therefore, the GetProcHierarchyNodeSize() returns the size
as a 32-bit value.
The VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT8', possible loss of data' while assigning the
length field of the Processor Hierarchy node structure.
To fix this, a type cast is added. In addition, there is a check
to ensure that the Processor Hierarchy node size does not exceed
MAX_UINT8.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4244: '=': conversion
from 'UINT16' to 'UINT8', possible loss of data' for the
SPCR InterfaceType field assignment.
The SPCR InterfaceType field uses the same encoding as that
of the DBG2 table Port Subtype field. However SPCR.InterfaceType
is 8-bit while the Port Subtype field in DBG2 table is 16-bit.
Since the Configuration Manager represents the Serial port
information using the struct CM_ARM_SERIAL_PORT_INFO, the
PortSubtype member in this struct is 16-bit.
To fix the warning an explicit type case is added. A validation
is also added to ensure that the Serial Port Subtype value
provided by the Configuration Manager is within the 8-bit
range (less than 256).
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The VS2017 compiler reports 'error C2016: C requires that
a struct or union has at least one member' for the struct
CM_ARM_CPU_INFO.
Remove struct CM_ARM_CPU_INFO as this is not in use.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The edk2 BaseTools report a warning if a local header file
is not listed under the [Sources] section in the INF file.
Add header files to the [Sources] section in the respective
INF files to fix the warnings.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the Generator modules. VS2017 compiler also
reports similar warnings for the DXE entry points.
Remove the CONST qualifier for the SystemTable pointer (the
second parameter to the constructor/destructor/DXE Entry
point) to make it compatible with the formal declaration.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2627
The commit will introduce a static PCD to specify the periodic interval
for checking the AP status when MP services StartupAllAPs() and
StartupThisAP() are being executed in a non-blocking manner. Or in other
words, specifies the interval for callback function CheckApsStatus().
The purpose is to provide the platform owners with the ability to choose
the proper interval value to trigger CheckApsStatus() according to:
A) The number of processors in the system;
B) How MP services (StartupAllAPs & StartupThisAP) being used.
Setting the PCD to a small value means the AP status check callback will
be triggered more frequently, it can benefit the performance for the case
when the BSP uses WaitForEvent() or uses CheckEvent() in a loop to wait
for AP(s) to complete the task, especially when the task can be finished
considerably fast on AP(s).
An example is within function CpuFeaturesInitialize() under
UefiCpuPkg/Library/RegisterCpuFeaturesLib/DxeRegisterCpuFeaturesLib.c,
where BSP will perform the same task with APs and requires all the
processors to finish the task before BSP proceeds to its next task.
Setting the PCD to a big value, on the other hand, can reduce the impact
on BSP by the time being consumed in CheckApsStatus(), especially when the
number of processors is huge so that the time consumed in CheckApsStatus()
is not negligible.
The type of the PCD is UINT32, which means the maximum possible interval
value can be set to:
4,294,967,295 microseconds = 4,295 seconds = 71.58 minutes = 1.19 hours
which should be sufficient for usage.
For least impact, the default value of the new PCD will be the same with
the current interval value. It will be set to 100,000 microseconds, which
is 100 milliseconds.
Unitest done:
A) OS boot successfully;
B) Use debug message to confirm the 'TriggerTime' parameter for the
'SetTimer' service is the same before & after this patch.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brian J. Johnson <brian.johnson@hpe.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ASSERT in SetTime_Conf Consistency Test.
SCT Test expect return as Invalid Parameter.
So removed ASSERT().
While at it, check that the NanoSecond field is within the range given
by the UEFI specification.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, depending on the size of the region being (re)mapped, the
page table manipulation code may replace a table entry with a block entry,
even if the existing table entry uses different mapping attributes to
describe different parts of the region it covers. This is undesirable, and
instead, we should avoid doing so unless we are disregarding the original
attributes anyway. And if we make such a replacement, we should free all
the page tables that have become orphaned in the process.
So let's implement this, by taking the table entry path through the code
for block sized regions if a table entry already exists, and the clear
mask is set (which means we are preserving attributes from the existing
mapping). And when we do replace a table entry with a block entry, free
all the pages that are no longer referenced.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
FreePageTablesRecursive () traverses the page table tree depth first
to free all pages that it finds, without taking into account the
level at which it is operating.
Since TT_TYPE_TABLE_ENTRY aliases TT_TYPE_BLOCK_ENTRY_LEVEL3, we cannot
distinguish table entries from block entries unless we take the level
into account, and so we may be dereferencing garbage if we happen to
try and free a hierarchy of page tables that has level 3 pages in it.
Let's fix this by passing the level into FreePageTablesRecursive (),
and limit the recursion to levels < 3.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Older GCC (<= 4.9) fail to infer that Parent is never used unless it
has been assigned before, and may throw an error like
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:
In function ‘PlatformPeim’:
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:132:24:
error: ‘Parent’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
RangesProp = fdt_getprop (Base, Parent, "ranges", &RangesLen);
Set Parent to 0 at the start of the sequence to work around this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2601
Fixes: 82662a3b5f ("ArmVirtPkg/PlatformPeiLib: discover the TPM base ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
GCC 4.8 or 4.9 may throw the following error when building OVMF:
Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:
In function ‘QemuLoadKernelImage’:
Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:416:30:
error: ‘CommandLine’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
UnicodeSPrintAsciiFormat (
cc1: all warnings being treated as errors
This is due to the fact that older GCCs fail to infer that CommandLine is
never actually used unless it has been assigned. So add a redundant NULL
assignment to help these older GCCs understand this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2630
Fixes: 7c47d89003 ("OvmfPkg: implement QEMU loader library for X86 with ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2575
The following components are currently missing from the [Components]
section of ArmPlatformPkg.dsc:
* ArmPlatformPkg/Library/HdLcd/HdLcd.inf
* ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.inf
This commit includes the components in the package DSC build.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2574
The following components are currently missing from the [Components]
section of ArmPkg.dsc:
* ArmPkg/Drivers/ArmCrashDumpDxe/ArmCrashDumpDxe.inf
* ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
* ArmPkg/Library/ArmMtlNullLib/ArmMtlNullLib.inf
* ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf
This commit includes the components in the package DSC build.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2365
This patch is to fix a build tool regression issue which was introduced
by commit 8ddec24dea.
compiler output message includes localized string.
So build failed when code decode the stdout/stderr byte arrays.
The cause of the build failed is that Commit 8ddec24dea
removed "errors='ignore'".
The build tool does not need to deal with localized string,
so we need to add "errors='ignore'".
this function is only invoked for structure PCDs.
Build failed if structurePcd is used in platform dsc file.
The patch is going to fixed this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Because of a bug, current EL gets passed to DC IVAC instruction instead
of the VA entry that needs to be invalidated.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
ArmVirtGicArchLib was originally implemented before virtualization
emulation was implemented in QEMU, and the GICv2 model implemented only
the physical copy of control registers.
Enabling virtualization emulation to QEMU adds also the virtual copy,
doubling the RegSize returned by FindCompatibleNodeReg () in
ArmVirtGicArchLibConstructor (). This triggered an ASSERT when running
QEMU with -M virt,virtualization=on. Address this by testing for both
possible valid values of RegSize.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2588
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
FaultTolerantWritePei consumes:
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase.
VariablePei consumes:
- PcdFlashNvStorageVariableBase64.
Due to the previous patches in this series, the above PCDs are available
in the PEI phase, in the SMM_REQUIRE build.
FaultTolerantWritePei produces a GUID-ed HOB with
FAULT_TOLERANT_WRITE_LAST_WRITE_DATA as contents. It also installs a Null
PPI that carries the same gEdkiiFaultTolerantWriteGuid as the HOB.
VariablePei depends on the Null PPI mentioned above with a DEPEX, consumes
the HOB (which is safe due to the DEPEX), and produces
EFI_PEI_READ_ONLY_VARIABLE2_PPI.
This enables read-only access to non-volatile UEFI variables in the PEI
phase, in the SMM_REQUIRE build.
For now, the DxeLoadCore() function in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c" will not access the
"MemoryTypeInformation" variable, because OVMF's PlatformPei always
produces the MemoryTypeInformation HOB.
(Note: when the boot mode is BOOT_ON_S3_RESUME, PlatformPei doesn't build
the HOB, but that's in sync with DxeLoadCore() also not looking for either
the HOB or the UEFI variable.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-5-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
The following flash-related base addresses:
- PcdFlashNvStorageVariableBase64,
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase,
are always set to constant (invariable) values in the "-D SMM_REQUIRE"
build of OVMF. (That's because in the SMM build, actual pflash is a hard
requirement, and the RAM-based emulation is never available.)
Set said PCDs statically, at build. This will allow us to depend on their
values in the PEI phase.
When SMM_REQUIRE is FALSE, this change has no effect (confirmed by report
file comparison).
When SMM_REQUIRE is TRUE, the report file shows the following changes:
- "PcdOvmfFlashNvStorageFtwSpareBase" and
"PcdOvmfFlashNvStorageFtwWorkingBase" are no longer consumed by any
module directly,
- for "PcdFlashNvStorageFtwSpareBase", "PcdFlashNvStorageFtwWorkingBase"
and "PcdFlashNvStorageVariableBase64", the access method changes from
DYN to FIXED,
- for the latter PCDs, the zero (dynamic default) values are replaced with
the desired constants.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-4-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
From the function description of GetIfrBinaryData(), FormSetGuid can be
NULL. However, FormSetGuid is passed to IsZeroGuid(). This causes exception
when FormSetGuid is NULL.
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2580
Ovmf build failed on Windows with VS2017 tool chain.
The error message like:
OvmfPkg\LinuxInitrdDynamicShellCommand\LinuxInitr
dDynamicShellCommand.c(199): error C2220: warning treated as error -
no 'object' file generated
OvmfPkg\LinuxInitrdDynamicShellCommand\LinuxInitrdDynamicShellCommand.c(199):
warning C4244: '=': conversion from 'UINT64' to 'UINTN',
possible loss of data
This patch is to cast UINT64 type to UINTN type
when doing the variable assignment.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some cosmetic fixups to the AArch64 MMU code:
- reflow overly long lines unless it hurts legibility
- add/remove whitespace according to the [de facto] coding style
- use camel case for goto labels
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-Id: <20200307091008.14918-3-ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
As it turns out, ARMv8 also permits accesses made with the MMU and
caches off to hit in the caches, so to ensure that any modifications
we make before enabling the MMU are visible afterwards as well, we
should invalidate page tables right after allocation like we do now on
ARM, if the MMU is still disabled at that point.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Message-Id: <20200307083849.8940-3-ard.biesheuvel@linaro.org>
Replace the slightly overcomplicated page table management code with
a simplified, recursive implementation that should be far easier to
reason about.
Note that, as a side effect, this extends the per-entry cache invalidation
that we do on page table entries to block and page entries, whereas the
previous change inadvertently only affected the creation of table entries.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-Id: <20200307083849.8940-2-ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
When the MDE_CPU_IA32 macro is not defined, there is no access to the
"KernelImageHandle" local variable in QemuStartKernelImage(). This breaks
the OvmfPkgIa32X64 and OvmfPkgX64 platform builds, at least with gcc-8.
Move the local variable to the inner scope, where declaration and usage
are inseparable.
(Note that such inner-scope declarations are frowned upon in the wider
edk2 codebase, but we use them liberally in ArmVirtPkg and OvmfPkg anyway,
because they help us reason about variable lifetime and visibility.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 7c47d89003
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2572
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Bob reports that VS2017 chokes on a tentative definition of the const
object 'mEfiFileProtocolTemplate', with the following error:
OvmfPkg\QemuKernelLoaderFsDxe\QemuKernelLoaderFsDxe.c(130):
error C2220: warning treated as error - no 'object' file generated
OvmfPkg\QemuKernelLoaderFsDxe\QemuKernelLoaderFsDxe.c(130):
warning C4132: 'mEfiFileProtocolTemplate': const object should be initialized
Let's turn the only function that relies on this tentative definition
into a forward declaration itself, and move its definition after the
external definition of the object. That allows us to drop the tentative
definition of the const object, and hopefully make VS2017 happy.
Cc: "Feng, Bob C" <bob.c.feng@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 859b55443a ("OvmfPkg/PlatformBootManagerLib: switch to
QemuLoadImageLib") replaced a dependency on LoadLinuxLib with one on
QemuLoadImageLib in the PlatformBootManagerLib implementation that is
shared between all OVMF builds, without taking into account that even
the Xen targeted builds incorporate this code, which is only used to
load kernels passed via the QEMU command line.
Since this is dead code on Xen, we can satisfy the dependency using
the generic version of QemuLoadImageLib, which does not rely on
LoadLinuxLib, which we can therefore drop from OvmfXen.dsc.
Fixes: 859b55443a
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We already expect normal memory to be mapped writeback cacheable if
EDK2 itself is to make use of it, so doing an early sanity check on
the memory type of the allocation that the page tables happened to
land in isn't very useful. So let's drop it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The expression passed into ArmSetTTBR0 () in ArmConfigureMmu() is
sub-optimal at several levels:
- TranslationTable is already aligned, and if it wasn't, doing it
here wouldn't help
- TTBRAttributes is guaranteed not to have any bits set outside of
the 0x7f mask, so the mask operation is pointless as well,
- an additional (UINTN) cast for good measure is also not needed.
So simplify the expression.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
On ARMv7 and up, doing cache maintenance by set/way is only
permitted in the context of on/offlining a core, and any other
uses should be avoided. Add ASSERT()s in the right place to
ensure that any uses with the MMU enabled are caught in DEBUG
builds.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
ArmLib is a BASE type library, which should not depend or
even be aware on DXE type protocols. So drop the reference
to gEfiCpuArchProtocolGuid.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Suspiciously, ArmLib's INF does not contain a [LibraryClasses]
section at all, but it turns out that all the library includes
it contains (except for ArmLib.h itself) are actually bogus so
let's just drop all of them. While at it, replace <Uefi.h> with
the more accurate <Base.h> for a BASE type module, and put the
includes in a consistent order.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The clean/invalidate helper functions that operate on a single cache
line identified by set, way and level in a special, architected format
are only used by the implementations of the clean/invalidate routines
that operate on the entire cache hierarchy, as exposed by ArmLib.
The latter routines will be deprecated soon, so move the helpers out
of ArmLib.h and into a private header so they are safe from abuse.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In the AARCH64 version of ArmMmuLib, we are currently relying on
set/way invalidation to ensure that the caches are in a consistent
state with respect to main memory once we turn the MMU on. Even if
set/way operations were the appropriate method to achieve this, doing
an invalidate-all first and then populating the page table entries
creates a window where page table entries could be loaded speculatively
into the caches before we modify them, and shadow the new values that
we write there.
So let's get rid of the blanket clean/invalidate operations, and
instead, update ArmUpdateTranslationTableEntry () to invalidate each
page table entry *after* it is written if the MMU is still disabled
at this point.
On ARMv8, it is guaranteed that memory accesses done by the page table
walker are cache coherent, and so we can ignore the case where the
MMU is on.
Since the MMU and D-cache are already off when we reach this point, we
can drop the MMU and D-cache disables as well. Maintenance of the I-cache
is unnecessary, since we are not modifying any code, and the installed
mapping is guaranteed to be 1:1. This means we can also leave it enabled
while the page table population code is running.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In the ARM version of ArmMmuLib, we are currently relying on set/way
invalidation to ensure that the caches are in a consistent state with
respect to main memory once we turn the MMU on. Even if set/way
operations were the appropriate method to achieve this, doing an
invalidate-all first and then populating the page table entries creates
a window where page table entries could be loaded speculatively into
the caches before we modify them, and shadow the new values that we
write there.
So let's get rid of the blanket clean/invalidate operations, and instead,
invalidate each page table right after allocating it, and each section
entry after it is updated (to address all the little corner cases that the
ARMv7 spec permits), and invalidate sets of level 2 entries in blocks,
using the generic invalidation routine from CacheMaintenanceLib
On ARMv7, cache maintenance may be required also when the MMU is
enabled, in case the page table walker is not cache coherent. However,
the code being updated here is guaranteed to run only when the MMU is
still off, and so we can disregard the case when the MMU and caches
are on.
Since the MMU and D-cache are already off when we reach this point, we
can drop the MMU and D-cache disables as well. Maintenance of the I-cache
is unnecessary, since we are not modifying any code, and the installed
mapping is guaranteed to be 1:1. This means we can also leave it enabled
while the page table population code is running.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Instead of overallocating memory and align the resulting base address
manually, use the AllocateAlignedPages () helper, which achieves the
same, and might even manage that without leaking a chunk of memory of
the same size as the allocation itself.
While at it, fix up a variable declaration in the same hunk, and drop
a comment whose contents add nothing to the following line of code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike the AArch64 implementation of ArmMmuLib, which combines the
initial page table population code with the code that runs at later
stages to manage permission attributes in the page tables, ARM uses
two completely separate sets of routines for this.
Since ArmMmuLib is a static library, we can prevent duplication of
this code between different users, which usually only need one or
the other. (Note that LTO should also achieve the same.)
This also makes it easier to reason about modifying the cache
maintenance handling, and replace the set/way ops with by-VA
ops, since the code that performs the set/way ops only executes
when the MMU is still off.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Make the CONSTRUCTOR define in the .INF AARCH64 only, so we can drop
the empty stub that exists for ARM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Cache maintenance operations by set/way are only intended to be used
in the context of on/offlining a core, while it has been taken out of
the coherency domain. Any use intended to ensure that the contents of
the cache have made it to main memory is unreliable, since cacheline
migration and non-architected system caches may cause these contents
to linger elsewhere, without being visible in main memory once the
MMU and caches are disabled.
In KVM on Linux, there are horrid hacks in place to ensure that such
set/way operations are trapped, and replaced with a single by-VA
clean/invalidate of the entire guest VA space once the MMU state
changes, which can be costly, and is unnecessary if we manage the
caches a bit more carefully, and perform maintenance by virtual
address only.
So let's get rid of the call to ArmInvalidateDataCache () in the
PrePeiCore startup code, and instead, invalidate the UEFI memory
region by virtual address, which is the only memory region we will
be touching with the caches and MMU both disabled and enabled.
(This will lead to data corruption if data written with the MMU off
is shadowed by clean, stale cachelines that stick around when the
MMU is enabled again.)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
This wasn't correctly testing for FD to be outside RAM,
when RAM base immediately follows the FD.
This is part of some cleanup for RPi4 in edk2-platform.
Signed-off-by: Andrei Warkentin <awarkentin@vmware.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The QemuLoadImageLib implementation we currently use for all OVMF
builds copies the behavior of the QEMU loader code that precedes it,
which is to disregard UEFI secure boot policies entirely when it comes
to loading kernel images that have been specified on the QEMU command
line. This behavior deviates from ArmVirtQemu based builds, which do
take UEFI secure boot policies into account, and refuse to load images
from the command line that cannot be authenticated.
The disparity was originally due to the fact that the QEMU command line
kernel loader did not use LoadImage and StartImage at all, but this
changed recently, and now, there are only a couple of reasons left to
stick with the legacy loader:
- it permits loading images that lack a valid PE/COFF header,
- it permits loading X64 kernels on IA32 firmware running on a X64
capable system.
Since every non-authentic PE/COFF image can trivially be converted into
an image that lacks a valid PE/COFF header, the former case can simply
not be supported in a UEFI secure boot context. The latter case is highly
theoretical, given that one could easily switch to native X64 firmware in
a VM scenario.
That leaves us with little justification to use the legacy loader at all
when UEFI secure boot policies are in effect, so let's switch to the
generic loader for UEFI secure boot enabled builds.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Linux v5.7 will introduce a new method to load the initial ramdisk
(initrd) from the loader, using the LoadFile2 protocol installed on a
special vendor GUIDed media device path.
Add support for this to our QEMU command line kernel/initrd loader.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Replace the open coded sequence to load Linux on x86 with a short and
generic sequence invoking QemuLoadImageLib, which can be provided by
a generic version that only supports the LoadImage and StartImage boot
services, and one that incorporates the entire legacy loading sequence
as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement another version of QemuLoadImageLib that uses LoadImage and
StartImage, but falls back to the legacy Linux loader code if that
fails. The logic in the legacy fallback routines is identical to the
current QEMU linux loader for X64 and IA32.
Note the use of the OVMF_LOADED_X86_LINUX_KERNEL protocol for the legacy
loaded image: this makes it possible to expose the LoadImage/StartImage
abstraction for the legacy loader, using the EFI paradigm of identifying
a loaded image solely by a handle.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In preparation of moving the legacy x86 loading to an implementation
of the QEMU load image library class, introduce a protocol header
and GUID that we will use to identify legacy loaded x86 Linux kernels
in the protocol database.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On x86, the kernel image consists of a setup block and the actual kernel,
and QEMU presents these as separate blobs, whereas on disk (and in terms
of PE/COFF image signing), they consist of a single image.
So add support to our FS loader driver to expose files via the abstract
file system that consist of up to two concatenated blobs, and redefine
the kernel file so it consists of the setup and kernel blobs, on every
architecture (on non-x86, the setup block is simply 0 bytes and is
therefore ignored implicitly)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We have no need for exposing the kernel command line as a file,
so remove support for that. Since the remaining blobs (kernel
and initrd) are typically much larger than a page, switch to
the page based allocator for blobs at the same time.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the QEMU loader file system implementation inside this library,
and switch to the separate QemuLoadImageLib library and the associated
driver to expose the kernel and initrd passed via the QEMU command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement QemuLoadImageLib, and make it load the image provided by the
QEMU_EFI_LOADER_FS_MEDIA_GUID/kernel device path that we implemented
in a preceding patch in a separate DXE driver, using only the standard
LoadImage and StartImage boot services.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Expose the existing implementation of an abstract filesystem exposing
the blobs passed to QEMU via the command line via a standalone DXE
driver.
Notable difference with the original code is the switch to a new vendor
GUIDed media device path, as opposed to a vendor GUID hardware device
path, which is not entirely appropriate for pure software constructs.
Since we are using the GetTime() runtime service in a DXE_DRIVER type
module, we need to DEPEX explicitly on gEfiRealTimeClockArchProtocolGuid.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In an upcoming patch, we will introduce a separate DXE driver that
exposes the virtual SimpleFileSystem implementation that carries the
kernel and initrd passed via the QEMU command line, and a separate
library that consumes it, to be incorporated into the boot manager.
Since the GUID used for the SimpleFileSystem implementation's device
path will no longer be for internal use only, create a well defined
GUID to identify the media device path.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
ASSERT in PollMem_Conf, CopyMem_Conf, SetBarAttributes_Conf
Conformance Test.
SCT Test expect return as Invalid Parameter or Unsupported.
Added Checks for Function Parameters.
return Invalid or Unsupported if Check fails.
Added Checks in PciIoPollIo(), PciIoIoRead()
PciIoIoWrite()
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
SdMmcPciHcDxe driver used to read response only after
command and data transfer completed. According to SDHCI
specification response data is ready after the command
complete status is set by the host controller. Getting
the response data early will help debugging the cases
when command completed but data transfer timed out.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
To allow for easier debug of failing commands we
have added a capability to print TRB and command
packet when we start execution of the TRB(on
DEBUG_VERBOSE level) and when the TRB failed to
execute correctly(on DEBUG_ERROR level). Additionally
we will also print error interrupt status and interrupt
status register on failed SD command.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cache maintenance operations by set/way are only intended to be used
in the context of on/offlining a core, while it has been taken out of
the coherency domain. Any use intended to ensure that the contents of
the cache have made it to main memory is unreliable, since cacheline
migration and non-architected system caches may cause these contents
to linger elsewhere, without being visible in main memory once the
MMU and caches are disabled.
In KVM on Linux, there are horrid hacks in place to ensure that such
set/way operations are trapped, and replaced with a single by-VA
clean/invalidate of the entire guest VA space once the MMU state
changes, which can be costly, and is unnecessary if we manage the
caches a bit more carefully, and perform maintenance by virtual
address only.
So let's get rid of the call to ArmInvalidateDataCache () in the
PrePeiCore startup code, and instead, invalidate the temporary RAM
region by virtual address, which is the only memory region we will
be touching with the caches and MMU both disabled and enabled,
which will lead to data corruption if data written with the MMU off
is shadowed by clean, stale cachelines that stick around when the
MMU is enabled again.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This driver depends on the gEfiCpuArchProtocolGuid protocol but does
not declare it, and so this dependency gets satisfied transitively
via ArmLib. However, ArmLib will drop this dependency as it does not
actually use it, so declare it for LcdGraphicsOutputDxe instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Linaro CI reports:
OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c:132:7:
error: variable 'Status' is used uninitialized whenever 'if' condition is
false [-Werror,-Wsometimes-uninitialized]
if (mInitrdLoadFile2Handle != NULL) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c:141:10:
note: uninitialized use occurs here
return Status;
^~~~~~
OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c:132:3:
note: remove the 'if' if its condition is always true
if (mInitrdLoadFile2Handle != NULL) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c:130:23:
note: initialize the variable 'Status' to silence this warning
EFI_STATUS Status;
^
= 0
Fix this by pulling the return of Status into the conditional block where
it is assigned, and return EFI_SUCCESS otherwise.
Fixes: 2632178bc6
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 2fe25a74d6 ("ArmPkg/MmCommunicationDxe: relay architected PI
events to MM context") update the ARM specific standalone MM client
driver to register for certain events in the entrypoint code, but did
so in a way that makes the entrypoint always return with an error.
Instead, return EFI_SUCCESS if registering for those events succeeds,
and back out the registrations that did succeed if one fails, and
return an error.
Fixes: 2fe25a74d6 ("ArmPkg/MmCommunicationDxe: relay architected PI events to MM context")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
We're going to switch the internal line terminators globally to LF at some
point, but until then, let's use CRLF consistently. Convert source files
with LFs in them to CRLF, using "unix2dos".
"git show -b" prints no code changes for this patch.
(I collected all the file name suffixes in this package, with:
$ git ls-files -- $PACKAGE | rev | cut -f 1 -d . | sort -u | rev
I eliminated those suffixes that didn't stand for text files, then
blanket-converted the rest with unix2dos. Finally, picked up the actual
changes with git-add.)
At the same time, the following file had to undergo TAB expansion:
ArmPlatformPkg/Scripts/Ds5/profile.py
I used "expand -t 4", conforming to the Indentation section of PEP-8
<https://www.python.org/dev/peps/pep-0008/#indentation>.
Both the CRLF conversion and the TAB expansion are motivated by
"PatchCheck.py". "PatchCheck.py" is also the reason why CRLF conversion
and TAB expansion have to happen in the same patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1659
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200227213903.13884-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
We're going to switch the internal line terminators globally to LF at some
point, but until then, let's use CRLF consistently. Convert source files
with LFs in them to CRLF, using "unix2dos".
"git show -b" prints no code changes for this patch.
(I collected all the file name suffixes in this package, with:
$ git ls-files -- $PACKAGE | rev | cut -f 1 -d . | sort -u | rev
I eliminated those suffixes that didn't stand for text files, then
blanket-converted the rest with unix2dos. Finally, picked up the actual
changes with git-add.)
The CRLF conversion is motivated by "PatchCheck.py".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1659
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200227213903.13884-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
We're going to switch the internal line terminators globally to LF at some
point, but until then, let's use CRLF consistently. Convert source files
with LFs in them to CRLF, using "unix2dos".
"git show -b" prints no code changes for this patch.
(I collected all the file name suffixes in this package, with:
$ git ls-files -- $PACKAGE | rev | cut -f 1 -d . | sort -u | rev
I eliminated those suffixes that didn't stand for text files, then
blanket-converted the rest with unix2dos. Finally, picked up the actual
changes with git-add.)
At the same time, the following three files had to undergo TAB expansion:
ArmPkg/Library/ArmSoftFloatLib/ArmSoftFloatLib.c
ArmPkg/Library/GccLto/liblto-aarch64.s
ArmPkg/Library/GccLto/liblto-arm.s
I used "expand -t 2", in order to stay close to the edk2 coding style
(which uses two spaces for indentation.)
Both the CRLF conversion and the TAB expansion are motivated by
"PatchCheck.py". "PatchCheck.py" is also the reason why CRLF conversion
and TAB expansion have to happen in the same patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1659
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200227213903.13884-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
During normal boot, CpuS3DataDxe allocates
- an empty CPU_REGISTER_TABLE entry in the
"ACPI_CPU_DATA.PreSmmInitRegisterTable" array, and
- an empty CPU_REGISTER_TABLE entry in the "ACPI_CPU_DATA.RegisterTable"
array,
for every CPU whose APIC ID CpuS3DataDxe can learn.
Currently EFI_MP_SERVICES_PROTOCOL is used for both determining the number
of CPUs -- the protocol reports the present-at-boot CPU count --, and for
retrieving the APIC IDs of those CPUs.
Consequently, if a CPU is hot-plugged at OS runtime, then S3 resume
breaks. That's because PiSmmCpuDxeSmm will not find the hot-added CPU's
APIC ID associated with any CPU_REGISTER_TABLE object, in the SMRAM copies
of either of the "RegisterTable" and "PreSmmInitRegisterTable" arrays. The
failure to match the hot-added CPU's APIC ID trips the ASSERT() in
SetRegister() [UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c].
If "PcdQ35SmramAtDefaultSmbase" is TRUE, then:
- prepare CPU_REGISTER_TABLE objects for all possible CPUs, not just the
present-at-boot CPUs (PlatformPei stored the possible CPU count to
"PcdCpuMaxLogicalProcessorNumber");
- use QEMU_CPUHP_CMD_GET_ARCH_ID for filling in the "InitialApicId" fields
of the CPU_REGISTER_TABLE objects.
This provides full APIC ID coverage for PiSmmCpuDxeSmm during S3 resume,
accommodating CPUs hot-added at OS runtime.
This patch is best reviewed with
$ git show -b
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-17-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The @file comments in UefiCpuPkg/CpuS3DataDxe say,
[...] It also only supports the number of CPUs reported by the MP
Services Protocol, so this module does not support hot plug CPUs. This
module can be copied into a CPU specific package and customized if these
additional features are required. [...]
The driver is so small that the simplest way to extend it with hotplug
support is indeed to clone it at first. In this patch, customize the
driver only with the following no-op steps:
- Update copyright notices.
- Update INF_VERSION to the latest INF spec version (1.29).
- Update FILE_GUID.
- Drop the UNI files.
- Replace EFI_D_VERBOSE with DEBUG_VERBOSE, to appease "PatchCheck.py".
This patch is best reviewed with:
$ git show --find-copies-harder
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-15-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
With the help of the Post-SMM Pen and the SMBASE relocation functions
added in the previous patches, we can now complete the root MMI handler
for CPU hotplug.
In the driver's entry point function:
- allocate the pen (in a reserved page in normal RAM),
- install the default ("first") SMI handler for hot-added CPUs (which
includes priming the exchange area between the MM Monarch and the
hot-added CPUs, i.e., shutting the APIC ID gate).
In the root MMI handler, for each hot-added CPU:
- record the APIC ID of the new CPU in CPU_HOT_PLUG_DATA,
- relocate the SMBASE of the new CPU,
- inform PiSmmCpuDxeSmm by calling
EFI_SMM_CPU_SERVICE_PROTOCOL.AddProcessor().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-14-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Call QemuCpuhpCollectApicIds() in the root MMI handler. The APIC IDs of
the hotplugged CPUs will be used for several purposes in subsequent
patches.
For calling QemuCpuhpCollectApicIds(), pre-allocate both of its output
arrays "PluggedApicIds" and "ToUnplugApicIds" in the driver's entry point
function. The allocation size is dictated by the possible CPU count, which
we fetch from "CPU_HOT_PLUG_DATA.ArrayLength".
The CPU_HOT_PLUG_DATA structure in SMRAM is an out-of-band information
channel between this driver and PiSmmCpuDxeSmm, underlying
EFI_SMM_CPU_SERVICE_PROTOCOL.
In order to consume "CPU_HOT_PLUG_DATA.ArrayLength", extend the driver's
DEPEX to EFI_SMM_CPU_SERVICE_PROTOCOL. PiSmmCpuDxeSmm stores the address
of CPU_HOT_PLUG_DATA to "PcdCpuHotPlugDataAddress", before it produces
EFI_SMM_CPU_SERVICE_PROTOCOL.
Stash the protocol at once, as it will be needed later.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-11-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Set "PcdCpuHotPlugSupport" to TRUE, when OVMF is built with SMM_REQUIRE.
Consequences:
(1) In PiCpuSmmEntry() [UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c],
resources are allocated and populated in advance for all possible
(i.e., potentially hot-added) processors, rather than only the
processors present at boot.
The possible count (called "mMaxNumberOfCpus") is set from
"PcdCpuMaxLogicalProcessorNumber"; we set the latter in
OvmfPkg/PlatformPei. (Refer to commit 83357313dd,
"OvmfPkg/PlatformPei: rewrite MaxCpuCountInitialization() for CPU
hotplug", 2020-01-29).
(2) The AddProcessor() and RemoveProcessor() member functions of
EFI_SMM_CPU_SERVICE_PROTOCOL, implemented in
"UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c", are no longer
short-circuited to EFI_UNSUPPORTED.
We'll rely on these functions in the CPU hotplug SMI handler, in a
subsequent patch.
(3) In PiCpuSmmEntry(), the address of the CPU_HOT_PLUG_DATA structure (in
SMRAM) is exposed via the dynamic-only "PcdCpuHotPlugDataAddress".
This structure is an information channel between the CPU hotplug SMI
handler, and EFI_SMM_CPU_SERVICE_PROTOCOL. Namely, at the first
"Index" where the following equality holds:
CPU_HOT_PLUG_DATA.ApicId[Index] == INVALID_APIC_ID
a hot-plugged CPU can be accepted, with the steps below:
(3.1) The hotplug SMI handler has to overwrite INVALID_APIC_ID with the
new CPU's APIC ID.
(3.2) The new CPU's SMBASE has to be relocated to:
CPU_HOT_PLUG_DATA.SmBase[Index]
(which was precomputed in step (1) above).
(3.3) The hotplug SMI handler is supposed to call
EFI_SMM_CPU_SERVICE_PROTOCOL.AddProcessor().
Note: we need not spell out "PcdCpuHotPlugDataAddress" in the
[PcdsDynamicDefault] sections of the OVMF DSC files, just so the PCD
become dynamically settable. That's because "UefiCpuPkg.dec" declares this
PCD with [PcdsDynamic, PcdsDynamicEx] access methods *only*.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-6-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
With "PcdCpuSmmEnableBspElection" set to FALSE, PiSmmCpuDxeSmm always
considers the processor with index 0 to be the SMM Monarch (a.k.a. the SMM
BSP). The SMM Monarch handles the SMI for real, while the other CPUs wait
in their SMM loops.
In a subsequent patch, we want to set "PcdCpuHotPlugSupport" to TRUE. For
that, PiCpuSmmEntry() [UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c] forces
us with an ASSERT() to set "PcdCpuSmmEnableBspElection" to TRUE as well.
To satisfy that expectation, we can simply remove our current
"PcdCpuSmmEnableBspElection|FALSE" setting, and inherit the default TRUE
value from "UefiCpuPkg.dec".
This causes "mSmmMpSyncData->BspIndex" in PiSmmCpuDxeSmm to lose its
static zero value (standing for CPU#0); instead it becomes (-1) in
general, and the SMM Monarch is elected anew on every SMI.
The default SMM Monarch Election is basically a race -- whichever CPU can
flip "mSmmMpSyncData->BspIndex" from (-1) to its own index, becomes king,
for handling that SMI. Refer to SmiRendezvous()
[UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c].
I consider this non-determinism less than ideal on QEMU/KVM; it would be
nice to stick with a "mostly permanent" SMM Monarch even with the Election
enabled. We can do that by implementing the PlatformSmmBspElection() API
in the SmmCpuPlatformHookLibQemu instance:
The IA32 APIC Base MSR can be read on each CPU concurrently, and it will
report the BSP bit as set only on the current Boot Service Processor. QEMU
marks CPU#0 as the BSP, by default.
Elect the current BSP, as reported by QEMU, for the SMM Monarch role.
(Note that the QEMU commit history is not entirely consistent on whether
QEMU/KVM may mark a CPU with nonzero index as the BSP:
- At tag v4.2.0, "target/i386/cpu.c" has a comment saying "We hard-wire
the BSP to the first CPU". This comment goes back to commit 6cb2996cef5e
("x86: Extend validity of bsp_to_cpu", 2010-03-04).
- Compare commit 9cb11fd7539b ("target-i386: clear bsp bit when
designating bsp", 2015-04-02) though, especially considering KVM.
Either way, this OvmfPkg patch is *not* dependent on CPU index 0; it just
takes the race on every SMI out of the game.)
One benefit of using a "mostly permanent" SMM Monarch / BSP is that we can
continue testing the SMM CPU synchronization by deterministically entering
the firmware on the BSP, vs. on an AP, from Linux guests:
$ time taskset -c 0 efibootmgr
$ time taskset -c 1 efibootmgr
(See
<https://github.com/tianocore/tianocore.github.io/wiki/Testing-SMM-with-QEMU,-KVM-and-libvirt#uefi-variable-access-test>.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512#c5
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The "ACPI_CPU_DATA.NumberOfCpus" field is specified as follows, in
"UefiCpuPkg/Include/AcpiCpuData.h" (rewrapped for this commit message):
//
// The number of CPUs. If a platform does not support hot plug CPUs,
// then this is the number of CPUs detected when the platform is booted,
// regardless of being enabled or disabled. If a platform does support
// hot plug CPUs, then this is the maximum number of CPUs that the
// platform supports.
//
The InitializeCpuBeforeRebase() and InitializeCpuAfterRebase() functions
in "UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c" try to restore CPU configuration on
the S3 Resume path for *all* CPUs accounted for in
"ACPI_CPU_DATA.NumberOfCpus". This is wrong, as with CPU hotplug, not all
of the possible CPUs may be present at the time of S3 Suspend / Resume.
The symptom is an infinite wait.
Instead, the "mNumberOfCpus" variable should be used, which is properly
maintained through the EFI_SMM_CPU_SERVICE_PROTOCOL implementation (see
SmmAddProcessor(), SmmRemoveProcessor(), SmmCpuUpdate() in
"UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c").
When CPU hotplug is disabled, "mNumberOfCpus" is constant, and equals
"ACPI_CPU_DATA.NumberOfCpus" at all times.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
[lersek@redhat.com: shut up UINTN->UINT32 warning from Windows VS2019 PR]
Complement commit 6cf1880fb5 ("OvmfPkg: add customized Tcg2ConfigPei
clone", 2018-03-09) by detecting TPM 1.2 devices.
Since Tpm12RequestUseTpm() returns success on any TPM interface,
(including FIFO & CRB which are TPM 2.0), try to send a GetTicks TPM
1.2 command to probe the version. In case of failure, fallback on TPM
2.0 path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20200226152433.1295789-3-marcandre.lureau@redhat.com>
Tested-by: Simon Hardy <simon.hardy@itdev.co.uk>
Before taking any actions, check if an instance of the LoadFile2 exists
already on the Linux initrd media GUID device path, and whether it was
provided by this command. If so, abort, since no duplicate instances of
the device path should exist.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is the UEFI counterpart to my Linux series which generalizes
mixed mode support into a feature that requires very little internal
knowledge about the architecture specifics of booting Linux on the
part of the bootloader or firmware.
Instead, we add a .compat PE/COFF header containing an array of
PE_COMPAT nodes containing <machine type, entrypoint> tuples that
describe alternate entrypoints into the image for different native
machine types, e.g., IA-32 in a 64-bit image so it can be booted
from IA-32 firmware.
This patch implements the PE/COFF emulator protocol to take this new
section into account, so that such images can simply be loaded via
LoadImage/StartImage, e.g., straight from the shell.
This feature is based on the EDK2 specific PE/COFF emulator protocol
that was introduced in commit 57df17fe26 ("MdeModulePkg/DxeCore:
invoke the emulator protocol for foreign images", 2019-04-14).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
EDK2's implementation of the LoadImage() boot service permits non-native
binaries to be loaded (i.e., X64 images on IA32 firmware), but any
attempts to start such an image using StartImage() will return
EFI_UNSUPPORTED.
The integration of the PE/COFF emulator protocol into the DXE core
deviates slightly from this paradigm, given that its IsImageSupported
hook as well as its RegisterImage hook are invoked from LoadImage,
and by the time StartImage is called, no opportunity is given to the
provider of the PE/COFF emulator protocol to prevent an image from
being started if it only supports loading it.
To address this disparity, let's move the invocation of RegisterImage()
to the implementation of the StartImage() boot service, allowing the
emulator to permit LoadImage() but reject StartImage() on images that
turn out not to meet the requirements of the emulator as it is being
started.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
Add a new 'initrd' command to the UEFI Shell that allows any file that is
accessible to the shell to be registered as the initrd that is returned
when Linux's EFI stub loader invokes the LoadFile2 protocol on its special
vendor media device path.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that all the TPM2 related plumbing is in place, we can add the
final piece that performs the measurements of loaded images into
the appropriate PCRs.
This patch ports commit d5a002aba0 ("OvmfPkg: plug
DxeTpm2MeasureBootLib into SecurityStubDxe", 2018-03-09) to ArmVirtQemu.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the DXE phase component that publishes the HII pages and
associated logic to enable TPM2 parameters to be configured by
the user via the setup menu.
This patch ports (parts of) the following commits to ArmVirtQemu:
- 3103389043 ("OvmfPkg: Add TCG2 Configuration menu to the Device
Manager menu", 2019-02-11)
- cf3ad972a2 ("OvmfPkg: reorganize TPM2 support in DSC/FDF files",
2020-01-09)
- f55477fe2d ("OvmfPkg: use HII type PCDs for TPM2 config related
variables", 2020-01-09)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the TPM2 support module in the DXE phase, and the associated
libraries and PCDs that it requires. This will be wired into the
measured boot support code in a subsequent patch.
Note that Tcg2Dxe.inf is added to ArmVirtQemuFvMain.fdf.inc, which
is shared with other platforms in ArmVirtPkg, but as those will not
set the TPM2_ENABLE define, this change does not affect them.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 0c0a50d6b3 ("OvmfPkg: include Tcg2Dxe module", 2018-03-09)
- b9777bb42e ("OvmfPkg: add Tcg2PhysicalPresenceLibQemu", 2018-05-22)
-- only to match OVMF's current lib class resolutions
- 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib if and only if
TPM2_ENABLE", 2019-07-04)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DxeTpmMeasurementLib should only be used on platforms that implement
measured boot, which we will do in a future patch, but only for
ArmVirtQemu, as the remaining ones are fundamentally incompatible,
given that they do not implement a PEI phase.
So use TpmMeasurementLibNull as the default resolution for all
ArmVirtPkg platforms, regardless of how they are built.
This mirrors commit 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib
if and only if TPM2_ENABLE", 2019-07-04).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Incorporate the PEI components and the associated library class
resolutions and PCD declarations to enable TPM2 support in the
PEI phase.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 6cf1880fb5 ("OvmfPkg: add customized Tcg2ConfigPei clone",
2018-03-09)
- 4672a48928 ("OvmfPkg: include Tcg2Pei module", 2018-03-09)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask defaults to 0x0 so
that the TPM init code adopts the currently active PCR banks as
the ones that are enabled by default.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
As a first step in gradually adding TPM2 support to ArmVirtQemu, add
the TPM2_ENABLE configurable to the [Defines] section, and if it is
set, add the ResetSystem PEIM to the build, along with the library
class references that we will need to support it:
- wire ArmVirtPsciResetSystemPeiLib into the ResetSystem PEIM itself,
which will be in charge of performing the actual reset
- add PeiResetSystemLib as the common ResetSystemLib resolution for
PEIM class modules, so that other PEIMs will invoke the PPI
published by the ResetSystem PEIM.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement a ArmVirtPkg specific version of the PSCI ResetSystemLib that
is usable in the PEI phase, as the existing one relies on the FDT client
protocol, making it unsuitable.
Note that accessing the device tree passed by QEMU via its initial base
address is guaranteed to be safe at any time during the PEI phase, so we
can defer discovery of the PSCI method until the time the reset library
is actually invoked (which is rarely)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Introduce a boolean PCD that tells us whether TPM support is enabled
in the build, and if it is, record the TPM base address in the existing
routine that traverses the device tree in the platform PEIM.
If a TPM is found, install the gOvmfTpmDiscoveredPpiGuid signalling PPI
that will unlock the dispatch of OvmfPkg's Tcg2ConfigPei. If TPM2
support is enabled in the build but no TPM2 device is found, install the
gPeiTpmInitializationDonePpiGuid PPI, which is normally installed by
Tcg2ConfigPei if no TPM2 is found, but in our case Tcg2ConfigPei will
never run so let's do it here instead.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
We currently include PcdLib.h in PlatformPeiLib, without declaring
this dependency in its .INF description. Since all the PCDs we use
resolve to fixed type in practice, this does not really matter at
the moment, but since we will be adding dynamic PCD references in
a subsequent patch, let's make the PcdLib dependency explicit, so
that its dispatch is guaranteed to be ordered correctly with respect
to the provider of the dynamic PCD PPI.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On ARM systems, the TPM does not live at a fixed address, and so we
need the platform to discover it first. So introduce a PPI that signals
that the TPM address has been discovered and recorded in the appropriate
PCD, and make Tcg2ConfigPei depex on it when built for ARM or AARCH64.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-03-04 08:48:09 +00:00
6264 changed files with 740541 additions and 473701 deletions
* PyTools - https://github.com/tianocore/edk2-pytool-extensions and https://github.com/tianocore/edk2-pytool-library
## Lessons Learned
### Templates and parameters
They are great but evil. If they are used as part of determining the steps of a build they must resolve before the build starts. They can not use variables set in a yml or determined as part of a matrix. If they are used in a step then they can be bound late.
### File matching patterns
On Linux this can hang if there are too many files in the search list.
### Templates and file splitting
Suggestion is to do one big yaml file that does what you want for one of your targets. Then do the second one and find the deltas. From that you can start to figure out the right split of files, steps, jobs.
### Conditional steps
If you want the step to show up in the log but not run, use a step conditional. This is great when a platform doesn't currently support a feature but you want the builders to know that the features exists and maybe someday it will.
If you want the step to not show up use a template step conditional wrapper. Beware this will be evaluated early (at build start). This can hide things not needed on a given OS for example.
This folder contains azure pipeline yml templates for "Core" and "Platform" Continuous Integration and PR validation.
## Common CI templates
### basetools-build-steps.yml
This template compiles the Edk2 basetools from source. The steps in this template are
conditional and will only run if variable `pkg_count` is greater than 0.
It also has two conditional steps only used when the toolchain contains GCC. These two steps
use `apt` to update the system packages and add those necessary for Edk2 builds.
## Core CI templates
### pr-gate-build-job.yml
This templates contains the jobs and most importantly the matrix of which packages and
targets to run for Core CI.
### pr-gate-steps.yml
This template is the main Core CI template. It controls all the steps run and is responsible for most functionality of the Core CI process. This template sets
the `pkg_count` variable using the `stuart_pr_eval` tool when the
build type is "pull request"
### spell-check-prereq-steps.yml
This template installs the node based tools used by the spell checker plugin. The steps
in this template are conditional and will only run if variable `pkg_count` is greater than 0.
## Platform CI templates
### platform-build-run-steps.yml
This template makes heavy use of pytools to build and run a platform in the Edk2 repo
Also uses basetools-build-steps.yml to compile basetools
#### Special Notes
* For a build type of pull request it will conditionally build if the patches change files that impact the platform.
* uses `stuart_pr_eval` to determine impact
* For manual builds or CI builds it will always build the platform
* It compiles basetools from source
* Will use `stuart_build --FlashOnly` to attempt to run the built image if the `Run` parameter is set.
* See the parameters block for expected configuration options
* Parameter `extra_install_step` allows the caller to insert extra steps. This is useful if additional dependencies, tools, or other things need to be installed. Here is an example of installing qemu on Windows.
Checks if any formatted files from prior execution are present.
Existence of such files is an unexpected condition. This might result
from an error that occurred during a previous run or a premature exit from a debug scenario. In any case, the package should be clean before starting a new run.
f"{pre_existing_formatted_file_count} formatted files already exist. To prevent overwriting these files, please remove them before running this plugin.")
def_cleanup_temporary_directory(self)->None:
"""
Cleans up the temporary directory used for this execution instance.
This removes the directory and all files created during this instance.
All of the modules that are included in the `Components` section of this
DSC should be of type HOST_APPLICATION.
### GUID Uniqueness Test - GuidCheck
### GUID Uniqueness Test - GuidCheck
This test works on the collection of all packages rather than an individual
This test works on the collection of all packages rather than an individual
@@ -193,6 +254,20 @@ Install
More cspell info: https://github.com/streetsidesoftware/cspell
More cspell info: https://github.com/streetsidesoftware/cspell
### License Checking - LicenseCheck
Scans all new added files in a package to make sure code is contributed under
BSD-2-Clause-Patent.
### Ecc tool - EccCheck
Run the Ecc tool on the package. The Ecc tool is available in the BaseTools
package. It checks that the code complies to the EDKII coding standard.
### Coding Standard Compliance - UncrustifyCheck
Runs the Uncrustify application to check for coding standard compliance issues.
## PyTool Scopes
## PyTool Scopes
Scopes are how the PyTool ext_dep, path_env, and plugins are activated. Meaning
Scopes are how the PyTool ext_dep, path_env, and plugins are activated. Meaning
@@ -207,6 +282,8 @@ few standard scopes.
| global-nix | edk2_invocable++ | Running on Linux based OS |
| global-nix | edk2_invocable++ | Running on Linux based OS |
| edk2-build | | This indicates that an invocable is building EDK2 based UEFI code |
| edk2-build | | This indicates that an invocable is building EDK2 based UEFI code |
| cibuild | set in .pytool/CISettings.py | Suggested target for edk2 continuous integration builds. Tools used for CiBuilds can use this scope. Example: asl compiler |
| cibuild | set in .pytool/CISettings.py | Suggested target for edk2 continuous integration builds. Tools used for CiBuilds can use this scope. Example: asl compiler |
| host-based-test | set in .pytool/CISettings.py | Turns on the host based tests and plugin |
| host-test-win | set in .pytool/CISettings.py | Enables the host based test runner for Windows |
## Future investments
## Future investments
@@ -216,8 +293,6 @@ few standard scopes.
* Visual Studio AARCH64 and ARM support
* Visual Studio AARCH64 and ARM support
* BaseTools C tools CI/PR and binary release process
* BaseTools C tools CI/PR and binary release process
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
