/** @file
This file describes the contents of the ACPI Fixed ACPI Description Table
(FADT).  Some additional ACPI values are defined in Acpi1_0.h and Acpi2_0.h.
All changes to the FADT contents should be done in this file.

Copyright (c) 2013-2015 Intel Corporation.

SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#include "Fadt.h"

EFI_ACPI_1_0_FIXED_ACPI_DESCRIPTION_TABLE FADT = {
  EFI_ACPI_1_0_FIXED_ACPI_DESCRIPTION_TABLE_SIGNATURE,
  sizeof (EFI_ACPI_1_0_FIXED_ACPI_DESCRIPTION_TABLE),
  EFI_ACPI_1_0_FIXED_ACPI_DESCRIPTION_TABLE_REVISION,
  0,                          // to make sum of entire table == 0
  EFI_ACPI_OEM_ID,            // OEMID is a 6 bytes long field
  EFI_ACPI_OEM_TABLE_ID,      // OEM table identification(8 bytes long)
  EFI_ACPI_OEM_REVISION,      // OEM revision number
  EFI_ACPI_CREATOR_ID,        // ASL compiler vendor ID
  EFI_ACPI_CREATOR_REVISION,  // ASL compiler revision number
  0,                     // Physical addesss of FACS
  0,                     // Physical address of DSDT
  INT_MODEL,             // System Interrupt Model
  RESERVED,              // reserved
  SCI_INT_VECTOR,        // System vector of SCI interrupt
  SMI_CMD_IO_PORT,       // Port address of SMI command port
  ACPI_ENABLE,           // value to write to port smi_cmd to enable ACPI
  ACPI_DISABLE,          // value to write to port smi_cmd to disable ACPI
  S4BIOS_REQ,            // Value to write to SMI CMD port to enter the S4BIOS state
  RESERVED,              // reserved - must be zero
  PM1a_EVT_BLK_ADDRESS,  // Port address of Power Mgt 1a Event Reg Blk
  PM1b_EVT_BLK_ADDRESS,  // Port address of Power Mgt 1b Event Reg Blk
  PM1a_CNT_BLK_ADDRESS,  // Port address of Power Mgt 1a Ctrl Reg Blk
  PM1b_CNT_BLK_ADDRESS,  // Port address of Power Mgt 1b Ctrl Reg Blk
  PM2_CNT_BLK_ADDRESS,   // Port address of Power Mgt 2  Ctrl Reg Blk
  PM_TMR_BLK_ADDRESS,    // Port address of Power Mgt Timer Ctrl Reg Blk
  GPE0_BLK_ADDRESS,      // Port addr of General Purpose Event 0 Reg Blk
  GPE1_BLK_ADDRESS,      // Port addr of General Purpose Event 1 Reg Blk
  PM1_EVT_LEN,           // Byte Length of ports at pm1X_evt_blk
  PM1_CNT_LEN,           // Byte Length of ports at pm1X_cnt_blk
  PM2_CNT_LEN,           // Byte Length of ports at pm2_cnt_blk
  PM_TM_LEN,             // Byte Length of ports at pm_tm_blk
  GPE0_BLK_LEN,          // Byte Length of ports at gpe0_blk
  GPE1_BLK_LEN,          // Byte Length of ports at gpe1_blk
  GPE1_BASE,             // offset in gpe model where gpe1 events start
  RESERVED,              // reserved
  P_LVL2_LAT,            // worst case HW latency to enter/exit C2 state
  P_LVL3_LAT,            // worst case HW latency to enter/exit C3 state
  FLUSH_SIZE,            // Size of area read to flush caches
  FLUSH_STRIDE,          // Stride used in flushing caches
  DUTY_OFFSET,           // bit location of duty cycle field in p_cnt reg
  DUTY_WIDTH,            // bit width of duty cycle field in p_cnt reg
  DAY_ALRM,              // index to day-of-month alarm in RTC CMOS RAM
  MON_ALRM,              // index to month-of-year alarm in RTC CMOS RAM
  CENTURY,               // index to century in RTC CMOS RAM
  RESERVED,              // reserved
  RESERVED,              // reserved
  RESERVED,              // reserved
  FLAG
};

VOID*
ReferenceAcpiTable (
  VOID
  )

{
  //
  // Reference the table being generated to prevent the optimizer from removing the
  // data structure from the exeutable
  //
  return (VOID*)&FADT;
}