/** @file

Intel I2C library implementation built upon I/O library


Copyright (c) 2013-2015 Intel Corporation.

SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#ifndef _I2C_LIB_H_
#define _I2C_LIB_H_

#include "I2cRegs.h"

/**

  The I2cWriteByte() function is a wrapper function for the WriteByte() function.
  Provides a standard way to execute a standard single byte write to an IC2 device
  (without accessing sub-addresses), as defined in the I2C Specification.

  @param SlaveAddress The I2C slave address of the device
                      with which to communicate.

  @param AddrMode     I2C Addressing Mode: 7-bit or 10-bit address.

  @param Buffer       Contains the value of byte data to execute to the
                      I2C slave device.


  @retval EFI_SUCCESS           Transfer success.
  @retval EFI_INVALID_PARAMETER  This or Buffer pointers are invalid.
  @retval EFI_TIMEOUT           Timeout while waiting xfer.
  @retval EFI_ABORTED           Controller aborted xfer.
  @retval EFI_DEVICE_ERROR      Device error detected by controller.

**/
EFI_STATUS
EFIAPI
I2cWriteByte (
  IN        EFI_I2C_DEVICE_ADDRESS  SlaveAddress,
  IN        EFI_I2C_ADDR_MODE       AddrMode,
  IN OUT VOID                       *Buffer
  );

/**

  The I2cReadByte() function is a wrapper function for the ReadByte() function.
  Provides a standard way to execute a standard single byte read to an I2C device
  (without accessing sub-addresses), as defined in the I2C Specification.

  @param SlaveAddress The I2C slave address of the device
                      with which to communicate.

  @param AddrMode     I2C Addressing Mode: 7-bit or 10-bit address.

  @param Buffer       Contains the value of byte data read from the
                      I2C slave device.


  @retval EFI_SUCCESS           Transfer success.
  @retval EFI_INVALID_PARAMETER This or Buffer pointers are invalid.
  @retval EFI_TIMEOUT           Timeout while waiting xfer.
  @retval EFI_ABORTED           Controller aborted xfer.
  @retval EFI_DEVICE_ERROR      Device error detected by controller.

**/
EFI_STATUS
EFIAPI
I2cReadByte (
  IN        EFI_I2C_DEVICE_ADDRESS  SlaveAddress,
  IN        EFI_I2C_ADDR_MODE       AddrMode,
  IN OUT VOID                       *Buffer
  );

/**

  The I2cWriteMultipleByte() function is a wrapper function for the WriteMultipleByte()
  function. Provides a standard way to execute multiple byte writes to an I2C device (e.g. when
  accessing sub-addresses or writing block of data), as defined in the I2C Specification.

  @param SlaveAddress The I2C slave address of the device
                      with which to communicate.

  @param AddrMode     I2C Addressing Mode: 7-bit or 10-bit address.

  @param Length       No. of bytes to be written.

  @param Buffer       Contains the value of byte to be written to the
                      I2C slave device.

  @retval EFI_SUCCESS            Transfer success.
  @retval EFI_INVALID_PARAMETER  This, Length or Buffer pointers are invalid.
  @retval EFI_UNSUPPORTED        Unsupported input param.
  @retval EFI_TIMEOUT            Timeout while waiting xfer.
  @retval EFI_ABORTED            Controller aborted xfer.
  @retval EFI_DEVICE_ERROR       Device error detected by controller.

**/
EFI_STATUS
EFIAPI
I2cWriteMultipleByte (
  IN        EFI_I2C_DEVICE_ADDRESS  SlaveAddress,
  IN        EFI_I2C_ADDR_MODE       AddrMode,
  IN UINTN                          *Length,
  IN OUT VOID                       *Buffer
  );

/**

  The I2cReadMultipleByte() function is a wrapper function for the ReadMultipleByte
  function. Provides a standard way to execute multiple byte writes to an IC2 device
  (e.g. when accessing sub-addresses or when reading block of data), as defined
  in the I2C Specification (I2C combined write/read protocol).

  @param SlaveAddress The I2C slave address of the device
                      with which to communicate.

  @param AddrMode     I2C Addressing Mode: 7-bit or 10-bit address.

  @param WriteLength  No. of bytes to be written. In this case data
                      written typically contains sub-address or sub-addresses
                      in Hi-Lo format, that need to be read (I2C combined
                      write/read protocol).

  @param ReadLength   No. of bytes to be read from I2C slave device.
                      need to be read.

  @param Buffer       Contains the value of byte data read from the
                      I2C slave device.

  @retval EFI_SUCCESS            Transfer success.
  @retval EFI_INVALID_PARAMETER  This, WriteLength, ReadLength or Buffer
                                 pointers are invalid.
  @retval EFI_UNSUPPORTED        Unsupported input param.
  @retval EFI_TIMEOUT            Timeout while waiting xfer.
  @retval EFI_ABORTED            Controller aborted xfer.
  @retval EFI_DEVICE_ERROR       Device error detected by controller.

**/
EFI_STATUS
EFIAPI
I2cReadMultipleByte (
  IN        EFI_I2C_DEVICE_ADDRESS  SlaveAddress,
  IN        EFI_I2C_ADDR_MODE       AddrMode,
  IN UINTN                          *WriteLength,
  IN UINTN                          *ReadLength,
  IN OUT VOID                       *Buffer
  );

#endif