8d1f5e0416
v2: Add error handling if can not create Attempts in driver entry point. Since we support to define a macro be a PCD value, we enhance our code by modifying the structure in IFR_NVDATA. This effect code logic mainly in Creating Keywords,Convert IFR NvData To AttemptConfigData ByKeyword and reverse function. Fix typo errors and sync based on the latest code. Enable iSCSI keywords configuration based on x-UEFI name space. we introduce new PCD to control the attempt numbers which will be created in non activated state, besides the Attempt name is changed to READ_ONLY attribute in UI. We can invoke KEYWORD HANDLER Protocol to configure the related keywords. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Wu Jiaxin jiaxin.wu@intel.com
102 lines
7.1 KiB
Plaintext
102 lines
7.1 KiB
Plaintext
// *++
|
|
//
|
|
// Copyright (c) 2004 - 2017, Intel Corporation. All rights reserved.<BR>
|
|
// This program and the accompanying materials
|
|
// are licensed and made available under the terms and conditions of the BSD License
|
|
// which accompanies this distribution. The full text of the license may be found at
|
|
// http://opensource.org/licenses/bsd-license.php
|
|
//
|
|
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
//
|
|
// Module Name:
|
|
//
|
|
// IScsiConfigStrings.uni
|
|
//
|
|
// Abstract:
|
|
//
|
|
// String definitions for iSCSI configuration.
|
|
//
|
|
// Revision History:
|
|
//
|
|
// --*/
|
|
|
|
/=#
|
|
|
|
#langdef en-US "English"
|
|
#langdef x-UEFI-ns "UefiNameSpace"
|
|
|
|
#string STR_ISCSI_CONFIG_FORM_TITLE #language en-US "iSCSI Configuration"
|
|
#string STR_ISCSI_CONFIG_FORM_HELP #language en-US "Configure the iSCSI parameters."
|
|
#string STR_ISCSI_MAIN_FORM_TITLE #language en-US "iSCSI Configuration"
|
|
#string STR_ISCSI_MAC_FORM_TITLE #language en-US "MAC Selection"
|
|
#string STR_ISCSI_CONFIG_INIT_NAME #language en-US "iSCSI Initiator Name"
|
|
#language x-UEFI-ns "iSCSIInitiatorName"
|
|
#string STR_ISCSI_CONFIG_INIT_NAME_HELP #language en-US "The worldwide unique name of iSCSI Initiator. Only IQN format is accepted."
|
|
#string STR_ISCSI_ATTEMPT_NAME #language en-US "iSCSI Attempt Name"
|
|
#string STR_ISCSI_ATTEMPT_NAME_HELP #language en-US "The human name defined for this attempt."
|
|
#string STR_ISCSI_CONFIG_RETRY #language en-US "Connection Retry Count"
|
|
#string STR_ISCSI_CONFIG_RETRY_HELP #language en-US "The minimum value is 0 and the maximum is 16. 0 means no retry."
|
|
#string STR_ISCSI_CONFIG_TIMEOUT #language en-US "Connection Establishing Timeout"
|
|
#string STR_ISCSI_CONFIG_TIMEOUT_HELP #language en-US "The timeout value in milliseconds. The minimum value is 100 milliseconds and the maximum is 20 seconds."
|
|
#string STR_ADD_ATTEMPT_ENTRY #language en-US "Add an Attempt"
|
|
#string STR_ISCSI_ATTEMPT_FORM_TITLE #language en-US "Attempt Configuration"
|
|
#string STR_DEL_ATTEMPT_ENTRY #language en-US "Delete Attempts"
|
|
#string STR_DEL_ATTEMPT_ENTRY_HELP #language en-US "Delete one or more attempts"
|
|
#string STR_ORDER_ATTEMPT_ENTRY #language en-US "Change Attempt Order"
|
|
#string STR_ISCSI_MODE_PROMPT #language en-US "iSCSI Mode"
|
|
#string STR_ISCSI_MODE_HELP #language en-US "Disabled, Enabled, Enabled for MPIO"
|
|
#string STR_ISCSI_MODE_DISABLED #language en-US "Disabled"
|
|
#string STR_ISCSI_MODE_ENABLED #language en-US "Enabled"
|
|
#string STR_ISCSI_MODE_ENABLED_FOR_MPIO #language en-US "Enabled for MPIO"
|
|
#string STR_IP_MODE_PROMPT #language en-US "Internet Protocol"
|
|
#string STR_IP_MODE_HELP #language en-US "Initiator IP address is system assigned in IP6 mode. In Autoconfigure mode, iSCSI driver will attempt to connect iSCSI target via IPv4 stack, if failed then attempt IPv6 stack."
|
|
#string STR_IP_MODE_IP4 #language en-US "IP4"
|
|
#string STR_IP_MODE_IP6 #language en-US "IP6"
|
|
#string STR_IP_MODE_AUTOCONFIG #language en-US "Autoconfigure"
|
|
#string STR_AUTHEN_TYPE_PROMPT #language en-US "Authentication Type"
|
|
#string STR_AUTHEN_TYPE_HELP #language en-US "Authentication method: CHAP, Kerberos, or None"
|
|
#string STR_AUTHEN_TYPE_CHAP #language en-US "CHAP"
|
|
#string STR_AUTHEN_TYPE_KERBEROS #language en-US "Kerberos"
|
|
#string STR_AUTHEN_TYPE_NONE #language en-US "None"
|
|
#string STR_ISCSI_LOCAL_IP_ADDRESS #language en-US " Initiator IP Address"
|
|
#string STR_ISCSI_LOCAL_MASK #language en-US " Initiator Subnet Mask"
|
|
#string STR_ISCSI_LOCAL_GATEWAY #language en-US " Gateway"
|
|
#string STR_ISCSI_IP_ADDRESS_HELP #language en-US "Enter IP address in dotted-decimal notation."
|
|
#string STR_ISCSI_TARGET_NAME #language en-US " Target Name"
|
|
#string STR_ISCSI_TARGET_NAME_HELP #language en-US "The worldwide unique name of the target. Only iqn. format is accepted."
|
|
#string STR_ISCSI_TARGET_ADDRESS #language en-US " Target Address"
|
|
#string STR_ISCSI_TARGET_ADDRESS_HELP #language en-US "Enter Target address in IPv4,IPv6 or URL format.You need to configure DNS server address in advance if input a URL string."
|
|
#string STR_ISCSI_TARGET_PORT #language en-US " Target Port"
|
|
#string STR_ISCSI_BOOT_LUN #language en-US " Boot LUN"
|
|
#string STR_ISCSI_BOOT_LUN_HELP #language en-US "Hexadecimal representation of the LU number. Examples are: 4752-3A4F-6b7e-2F99, 6734-9-156f-127, 4186-9"
|
|
#string STR_ISCSI_ENABLE_DHCP #language en-US "Enable DHCP"
|
|
#string STR_ISCSI_ENABLE_DHCP_ON_TARGET #language en-US "Get target info via DHCP"
|
|
#string STR_CHAP_TYPE_PROMPT #language en-US " CHAP Type"
|
|
#string STR_CHAP_TYPE_HELP #language en-US "None, One way CHAP or mutual CHAP"
|
|
#string STR_CHAP_TYPE_UNI #language en-US "One way"
|
|
#string STR_CHAP_TYPE_MUTUAL #language en-US "Mutual"
|
|
#string STR_ISCSI_CHAP_NAME #language en-US " CHAP Name"
|
|
#string STR_ISCSI_CHAP_SECRET #language en-US " CHAP Secret"
|
|
#string STR_ISCSI_CHAP_SECRET_HELP #language en-US "The minimum length is 12 bytes and the maximum length is 16 bytes."
|
|
#string STR_ISCSI_REVERSE_CHAP_NAME #language en-US " Reverse CHAP Name"
|
|
#string STR_ISCSI_REVERSE_CHAP_SECRET #language en-US " Reverse CHAP Secret"
|
|
#string STR_RETURN_MAIN_FORM #language en-US "Back to Previous Page"
|
|
#string STR_SAVE_CHANGES #language en-US "Save Changes"
|
|
#string STR_SAVE_CHANGES_HELP #language en-US "Must reboot system manually for changes to take place."
|
|
#string STR_NULL #language en-US ""
|
|
#string STR_SAVE_AND_EXIT #language en-US "Commit Changes and Exit"
|
|
#string STR_NO_SAVE_AND_EXIT #language en-US "Discard Changes and Exit"
|
|
#string STR_ISCSI_CONFIG_ISID #language en-US "ISID"
|
|
#string STR_ISCSI_CONFIG_ISID_HELP #language en-US "OUI-format ISID in 6 bytes, default value are derived from MAC address. Only last 3 bytes are configurable. Example: update 0ABBCCDDEEFF to 0ABBCCF07901 by input F07901."
|
|
#string STR_ISCSI_MAC_PROMPT #language en-US "Configure the mac address for the attempt"
|
|
#language x-UEFI-ns "iSCSIMacAddr"
|
|
#string STR_ISCSI_ADD_ATTEMPTS #language en-US "Add Attempts"
|
|
#language x-UEFI-ns "iSCSIAddAttempts"
|
|
#string STR_ISCSI_DELETE_ATTEMPTS #language en-US "Delete Attempts"
|
|
#language x-UEFI-ns "iSCSIDeleteAttempts"
|
|
#string STR_ISCSI_DISPLAY_ATTEMPTS #language en-US "Display Attempts"
|
|
#language x-UEFI-ns "iSCSIDisplayAttemptList"
|
|
#string STR_ISCSI_ATTEMPT_ORDER #language en-US "New Attempt Order"
|
|
#language x-UEFI-ns "iSCSIAttemptOrder"
|