Files
system76-edk2/UefiCpuPkg/Library/MpInitLib/AmdSev.c
Xie, Yuanhao 8bb018afaf UefiCpuPkg: Create MpHandOff.
Initially, the purpose of the Hob was twofold: it served as a way to
transfer information from PEI to DXE. However, during the DXE phase,
only a few fields from the CPU_MP_DATA which collected in PEI phase were
 needed. A new Hob was specifically created to transfer information
 to the DXE phase. This new Hob contained only the essential fields
 required for reuse in DXE. For instance, instead of directly including
  the BspNumber in MpHandOff, the DXE phase introduced the use of
  GetBspNumber() to collect the BspNumber from ApicID and CpuCount.

The SaveCpuMpData() function was updated to construct the MP_HAND_OFF
Hob. Additionally, the function introduced the MP_HAND_OFF_SIGNAL,
which solely served the purpose of awakening the APs
and transitioning their context from PEI to DXE. The
WaitLoopExecutionMode field indicated whether the bit mode of PEI
matched that of DXE. Both of them were filled only if the ApLoopMode
was not ApInHltLoop. In the case of ApInHltLoop, it remained necessary
to wake up the APs using the init-sipi-sipi sequence. This improvement
 still allow INIT-SIPI-SIPI even APs are wait in Run/Mwait loop mode.

The function GetMpHandOffHob() was added to facilitate access to the
collected MpHandOff in the DXE phase. The CpuMpData in the DXE phase
was updated by gathering information from MpHandOff. Since MpHandOff
replaced the usage of OldCpuMpData and contained essential information
from the PEI phase to the DXE phase. AmdSevUpdateCpuMpData was included
to maintain the original implementation of AmdSev, ensuring that
OldCpuMpData->NewCpuMpData pointed to CpuMpData.

Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com>
2023-07-11 02:47:27 +00:00

280 lines
6.9 KiB
C

/** @file
CPU MP Initialize helper function for AMD SEV.
Copyright (c) 2021, AMD Inc. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#include "MpLib.h"
#include <Library/CcExitLib.h>
/**
Get Protected mode code segment with 16-bit default addressing
from current GDT table.
@return Protected mode 16-bit code segment value.
**/
STATIC
UINT16
GetProtectedMode16CS (
VOID
)
{
IA32_DESCRIPTOR GdtrDesc;
IA32_SEGMENT_DESCRIPTOR *GdtEntry;
UINTN GdtEntryCount;
UINT16 Index;
Index = (UINT16)-1;
AsmReadGdtr (&GdtrDesc);
GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
GdtEntry = (IA32_SEGMENT_DESCRIPTOR *)GdtrDesc.Base;
for (Index = 0; Index < GdtEntryCount; Index++) {
if ((GdtEntry->Bits.L == 0) &&
(GdtEntry->Bits.DB == 0) &&
(GdtEntry->Bits.Type > 8))
{
break;
}
GdtEntry++;
}
ASSERT (Index != GdtEntryCount);
return Index * 8;
}
/**
Get Protected mode code segment with 32-bit default addressing
from current GDT table.
@return Protected mode 32-bit code segment value.
**/
STATIC
UINT16
GetProtectedMode32CS (
VOID
)
{
IA32_DESCRIPTOR GdtrDesc;
IA32_SEGMENT_DESCRIPTOR *GdtEntry;
UINTN GdtEntryCount;
UINT16 Index;
Index = (UINT16)-1;
AsmReadGdtr (&GdtrDesc);
GdtEntryCount = (GdtrDesc.Limit + 1) / sizeof (IA32_SEGMENT_DESCRIPTOR);
GdtEntry = (IA32_SEGMENT_DESCRIPTOR *)GdtrDesc.Base;
for (Index = 0; Index < GdtEntryCount; Index++) {
if ((GdtEntry->Bits.L == 0) &&
(GdtEntry->Bits.DB == 1) &&
(GdtEntry->Bits.Type > 8))
{
break;
}
GdtEntry++;
}
ASSERT (Index != GdtEntryCount);
return Index * 8;
}
/**
Reset an AP when in SEV-ES mode.
If successful, this function never returns.
@param[in] Ghcb Pointer to the GHCB
@param[in] CpuMpData Pointer to CPU MP Data
**/
VOID
MpInitLibSevEsAPReset (
IN GHCB *Ghcb,
IN CPU_MP_DATA *CpuMpData
)
{
EFI_STATUS Status;
UINTN ProcessorNumber;
UINT16 Code16, Code32;
AP_RESET *APResetFn;
UINTN BufferStart;
UINTN StackStart;
Status = GetProcessorNumber (CpuMpData, &ProcessorNumber);
ASSERT_EFI_ERROR (Status);
Code16 = GetProtectedMode16CS ();
Code32 = GetProtectedMode32CS ();
APResetFn = (AP_RESET *)(CpuMpData->WakeupBufferHigh + CpuMpData->AddressMap.SwitchToRealNoNxOffset);
BufferStart = CpuMpData->MpCpuExchangeInfo->BufferStart;
StackStart = CpuMpData->SevEsAPResetStackStart -
(AP_RESET_STACK_SIZE * ProcessorNumber);
//
// This call never returns.
//
APResetFn (BufferStart, Code16, Code32, StackStart);
}
/**
Allocate the SEV-ES AP jump table buffer.
@param[in, out] CpuMpData The pointer to CPU MP Data structure.
**/
VOID
AllocateSevEsAPMemory (
IN OUT CPU_MP_DATA *CpuMpData
)
{
if (CpuMpData->SevEsAPBuffer == (UINTN)-1) {
CpuMpData->SevEsAPBuffer =
CpuMpData->SevEsIsEnabled ? GetSevEsAPMemory () : 0;
}
}
/**
Program the SEV-ES AP jump table buffer.
@param[in] SipiVector The SIPI vector used for the AP Reset
**/
VOID
SetSevEsJumpTable (
IN UINTN SipiVector
)
{
SEV_ES_AP_JMP_FAR *JmpFar;
UINT32 Offset, InsnByte;
UINT8 LoNib, HiNib;
JmpFar = (SEV_ES_AP_JMP_FAR *)(UINTN)FixedPcdGet32 (PcdSevEsWorkAreaBase);
ASSERT (JmpFar != NULL);
//
// Obtain the address of the Segment/Rip location in the workarea.
// This will be set to a value derived from the SIPI vector and will
// be the memory address used for the far jump below.
//
Offset = FixedPcdGet32 (PcdSevEsWorkAreaBase);
Offset += sizeof (JmpFar->InsnBuffer);
LoNib = (UINT8)Offset;
HiNib = (UINT8)(Offset >> 8);
//
// Program the workarea (which is the initial AP boot address) with
// far jump to the SIPI vector (where XX and YY represent the
// address of where the SIPI vector is stored.
//
// JMP FAR [CS:XXYY] => 2E FF 2E YY XX
//
InsnByte = 0;
JmpFar->InsnBuffer[InsnByte++] = 0x2E; // CS override prefix
JmpFar->InsnBuffer[InsnByte++] = 0xFF; // JMP (FAR)
JmpFar->InsnBuffer[InsnByte++] = 0x2E; // ModRM (JMP memory location)
JmpFar->InsnBuffer[InsnByte++] = LoNib; // YY offset ...
JmpFar->InsnBuffer[InsnByte++] = HiNib; // XX offset ...
//
// Program the Segment/Rip based on the SIPI vector (always at least
// 16-byte aligned, so Rip is set to 0).
//
JmpFar->Rip = 0;
JmpFar->Segment = (UINT16)(SipiVector >> 4);
}
/**
The function puts the AP in halt loop.
@param[in] CpuMpData The pointer to CPU MP Data structure.
**/
VOID
SevEsPlaceApHlt (
CPU_MP_DATA *CpuMpData
)
{
MSR_SEV_ES_GHCB_REGISTER Msr;
GHCB *Ghcb;
UINT64 Status;
BOOLEAN DoDecrement;
BOOLEAN InterruptState;
DoDecrement = (BOOLEAN)(CpuMpData->InitFlag == ApInitConfig);
while (TRUE) {
Msr.GhcbPhysicalAddress = AsmReadMsr64 (MSR_SEV_ES_GHCB);
Ghcb = Msr.Ghcb;
CcExitVmgInit (Ghcb, &InterruptState);
if (DoDecrement) {
DoDecrement = FALSE;
//
// Perform the delayed decrement just before issuing the first
// VMGEXIT with AP_RESET_HOLD.
//
InterlockedDecrement ((UINT32 *)&CpuMpData->MpCpuExchangeInfo->NumApsExecuting);
}
Status = CcExitVmgExit (Ghcb, SVM_EXIT_AP_RESET_HOLD, 0, 0);
if ((Status == 0) && (Ghcb->SaveArea.SwExitInfo2 != 0)) {
CcExitVmgDone (Ghcb, InterruptState);
break;
}
CcExitVmgDone (Ghcb, InterruptState);
}
//
// Awakened in a new phase? Use the new CpuMpData
//
if (CpuMpData->NewCpuMpData != NULL) {
CpuMpData = CpuMpData->NewCpuMpData;
}
MpInitLibSevEsAPReset (Ghcb, CpuMpData);
}
/**
The function fills the exchange data for the AP.
@param[in] ExchangeInfo The pointer to CPU Exchange Data structure
**/
VOID
FillExchangeInfoDataSevEs (
IN volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo
)
{
UINT32 StdRangeMax;
AsmCpuid (CPUID_SIGNATURE, &StdRangeMax, NULL, NULL, NULL);
if (StdRangeMax >= CPUID_EXTENDED_TOPOLOGY) {
CPUID_EXTENDED_TOPOLOGY_EBX ExtTopoEbx;
AsmCpuid (CPUID_EXTENDED_TOPOLOGY, NULL, &ExtTopoEbx.Uint32, NULL, NULL);
ExchangeInfo->ExtTopoAvail = !!ExtTopoEbx.Bits.LogicalProcessors;
}
}
/**
Get pointer to CPU MP Data structure from GUIDed HOB.
@param[in] CpuMpData The pointer to CPU MP Data structure.
**/
VOID
AmdSevUpdateCpuMpData (
IN CPU_MP_DATA *CpuMpData
)
{
CPU_MP_DATA *OldCpuMpData;
OldCpuMpData = GetCpuMpDataFromGuidedHob ();
OldCpuMpData->NewCpuMpData = CpuMpData;
}