tye f6b7393ceb [Change summary]:
1. Update NetLib to a combined NetLib support dual network stack:
1) Add Network Debug facility for IPv4 stack.
2) Extend the library APIs to support IPv6 stack:
   a. NetIp6IsUnspecifiedAddr
   b. NetIp6IsLinkLocalAddr   
   c. NetIp6IsNetEqual
   d. NetLibCreateIPv6DPathNode.
   e. NetIp6PseudoHeadChecksum
   f. NetIp6IsValidUnicast
3) Update the structure definitions:
   a. Update NET_BUF to add EFI_IP6_HEADER and EFI_UDP_HEADER
   b. Add NET_IP6_PSEUDO_HDR
4) Update Ip4IsUnicast to NetIp4IsUnicast

2. Update the impacted modules to adopt the combined NetLib.

3. Clean up coding style errors in all network drivers and libraries.


git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9391 6f19259b-4bc3-4df7-8a09-765794883524
2009-11-04 08:18:34 +00:00

114 lines
3.5 KiB
C

/** @file
The header file of CHAP configuration.
Copyright (c) 2004 - 2009, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _ISCSI_CHAP_H_
#define _ISCSI_CHAP_H_
#define ISCSI_CHAP_AUTH_INFO_GUID \
{ \
0x786ec0ac, 0x65ae, 0x4d1b, {0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97} \
}
extern EFI_GUID mIScsiCHAPAuthInfoGuid;
#define ISCSI_AUTH_METHOD_CHAP "CHAP"
#define ISCSI_KEY_CHAP_ALGORITHM "CHAP_A"
#define ISCSI_KEY_CHAP_IDENTIFIER "CHAP_I"
#define ISCSI_KEY_CHAP_CHALLENGE "CHAP_C"
#define ISCSI_KEY_CHAP_NAME "CHAP_N"
#define ISCSI_KEY_CHAP_RESPONSE "CHAP_R"
#define ISCSI_CHAP_ALGORITHM_MD5 5
#define ISCSI_CHAP_AUTH_MAX_LEN 1024
///
/// MD5_HASHSIZE
///
#define ISCSI_CHAP_RSP_LEN 16
#define ISCSI_CHAP_INITIAL 0
#define ISCSI_CHAP_STEP_ONE 1
#define ISCSI_CHAP_STEP_TWO 2
#define ISCSI_CHAP_STEP_THREE 3
#define ISCSI_CHAP_STEP_FOUR 4
#pragma pack(1)
typedef struct _ISCSI_CHAP_AUTH_CONFIG_NVDATA {
UINT8 CHAPType;
CHAR8 CHAPName[ISCSI_CHAP_NAME_MAX_LEN];
CHAR8 CHAPSecret[ISCSI_CHAP_SECRET_STORAGE];
CHAR8 ReverseCHAPName[ISCSI_CHAP_NAME_MAX_LEN];
CHAR8 ReverseCHAPSecret[ISCSI_CHAP_SECRET_STORAGE];
} ISCSI_CHAP_AUTH_CONFIG_NVDATA;
#pragma pack()
///
/// ISCSI CHAP Authentication Data
///
typedef struct _ISCSI_CHAP_AUTH_DATA {
ISCSI_CHAP_AUTH_CONFIG_NVDATA AuthConfig;
UINT32 InIdentifier;
UINT8 InChallenge[ISCSI_CHAP_AUTH_MAX_LEN];
UINT32 InChallengeLength;
//
// Calculated CHAP Response (CHAP_R) value
//
UINT8 CHAPResponse[ISCSI_CHAP_RSP_LEN];
//
// Auth-data to be sent out for mutual authentication
//
UINT32 OutIdentifier;
UINT8 OutChallenge[ISCSI_CHAP_AUTH_MAX_LEN];
UINT32 OutChallengeLength;
} ISCSI_CHAP_AUTH_DATA;
/**
This function checks the received iSCSI Login Response during the security
negotiation stage.
@param[in] Conn The iSCSI connection.
@retval EFI_SUCCESS The Login Response passed the CHAP validation.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval EFI_PROTOCOL_ERROR Some kind of protocol error happend.
@retval Others Other errors as indicated.
**/
EFI_STATUS
IScsiCHAPOnRspReceived (
IN ISCSI_CONNECTION *Conn
);
/**
This function fills the CHAP authentication information into the login PDU
during the security negotiation stage in the iSCSI connection login.
@param[in] Conn The iSCSI connection.
@param[in, out] Pdu The PDU to send out.
@retval EFI_SUCCESS All check passed and the phase-related CHAP
authentication info is filled into the iSCSI PDU.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval EFI_PROTOCOL_ERROR Some kind of protocol error happend.
**/
EFI_STATUS
IScsiCHAPToSendReq (
IN ISCSI_CONNECTION *Conn,
IN OUT NET_BUF *Pdu
);
#endif