sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
system76-edk2/ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.uni
Tapan Shah 3eb46cfce8 ShellPkg: Help and Error Messages Update 
Updates to various profile commands help and error message output with better wordings.
Fix few inconsistency issues found in error messages across various profile commands.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Tapan Shah <tapandshah@hp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17032 6f19259b-4bc3-4df7-8a09-765794883524
2015-03-09 22:18:59 +00:00

168 lines
20 KiB
Plaintext
Raw Blame History

// /**
//
// (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P.<BR>
// Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved. <BR>
// This program and the accompanying materials
// are licensed and made available under the terms and conditions of the BSD License
// which accompanies this distribution. The full text of the license may be found at
// http://opensource.org/licenses/bsd-license.php
//
// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
//
// Module Name:
//
// UefiShellNetwork1CommandsLib.uni
//
// Abstract:
//
// String definitions for UEFI Shell 2.0 network 1 commands
//
//
// **/
/=#
#langdef en-US "english"
#string STR_GEN_TOO_MANY #language en-US "%H%s%N: Too many arguments.\r\n"
#string STR_GEN_TOO_FEW #language en-US "%H%s%N: Too few arguments.\r\n"
#string STR_GEN_PARAM_INV #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n"
#string STR_GEN_PROBLEM #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n"
#string STR_GEN_PROBLEM_OP2 #language en-US "%H%s%N: Invalid argument - '%H%s%N'. Expected '%B%s%N' or '%B%s%N'.\r\n"
#string STR_GEN_PROBLEM_VAL #language en-US "%H%s%N: Bad value - '%H%s%N' for flag - '%H%s%N'\r\n"
#string STR_GEN_NO_VALUE #language en-US "%H%s%N: Missing argument for flag - '%H%s%N'\r\n"
#string STR_GEN_ERR_AD #language en-US "%H%s%N: Access denied.\r\n"
#string STR_GEN_ERR_UK #language en-US "%H%s%N: Status: %r\r\n"
#string STR_GEN_PARAM_CON #language en-US "%H%s%N: Parameters conflict.\r\n"
#string STR_GEN_FILE_OPEN_FAIL #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n"
#string STR_GEN_FILE_AD #language en-US "%H%s%N: Access file error - '%H%s%N'\r\n"
#string STR_GEN_CRLF #language en-US "\r\n"
#string STR_GEN_NO_FILES #language en-US "%H%s%N: No matching files were found.\r\n"
#string STR_GEN_DIR_NF #language en-US "%H%s%N: Directory not found - '%H%s%N'\r\n"
#string STR_GEN_FILE_NF #language en-US "%H%s%N: File not found - '%H%s%N'\r\n"
#string STR_GEN_IS_DIR #language en-US "%H%s%N: '%H%s%N' is a directory\r\n"
#string STR_GEN_PROTOCOL_NF #language en-US "%H%s%N: The protocol '%H%s%N' is required and not found (%g).\r\n"
#string STR_PING_CONFIG #language en-US "Config %r\r\n"
#string STR_PING_GETMODE #language en-US "GetModeData %r\r\n"
#string STR_PING_GETDATA #language en-US "GetData %r\r\n"
#string STR_PING_SEND_REQUEST #language en-US "Echo request sequence %d did not complete successfully.\r\n"
#string STR_PING_NOSOURCE_INDO #language en-US "There are no sources in %s's multicast domain.\r\n"
#string STR_PING_NETWORK_ERROR #language en-US "%H%s%N: Network function failed with %r\r\n"
#string STR_PING_CONFIGD_NIC_NF #language en-US "%H%s%N: No configured interfaces were found.\r\n"
#string STR_PING_NOROUTE_FOUND #language en-US "There is no route to the destination '%B%s%N' from the source '%B%s%N' was found.\r\n"
#string STR_PING_START #language en-US "Ping %s %d data bytes.\r\n"
#string STR_PING_TIMEOUT #language en-US "Echo request sequence %d timeout.\r\n"
#string STR_PING_REPLY_INFO #language en-US "%d bytes from %s : icmp_seq=%d ttl=%d time%c%dms\r\n"
#string STR_PING_STAT #language en-US "\n%d packets transmitted, %d received, %d%% packet loss, time %dms\r\n"
#string STR_PING_RTT #language en-US "\nRtt(round trip time) min=%dms max=%dms avg=%dms\r\n"
#string STR_GET_HELP_PING #language en-US ""
".TH ping 0 "Pings the target host with an IPv4 stack."\r\n"
".SH NAME\r\n"
"Pings the target host with an IPv4 stack.\r\n"
".SH SYNOPSIS\r\n"
" \r\n"
"PING [-_s SourceIp] [-n count] [-l size] TargetIp\r\n"
".SH OPTIONS\r\n"
" \r\n"
" -n - Specifies the number of echo request datagrams to be sent.\r\n"
" -l - Specifies the size of the data buffer in the echo request datagram.\r\n"
" -_s - Specifies the source adapter as IPv4 address.\r\n"
" SourceIp - Specifies the IPv4 address of the source machine.\r\n"
" TargetIp - Specifies the IPv4 address of the target machine.\r\n"
".SH DESCRIPTION\r\n"
" \r\n"
"NOTES:\r\n"
" 1. This command uses the ICMPv4 ECHO_REQUEST datagram to elicit an ECHO_REPLY\r\n"
" from a host.\r\n"
".SH EXAMPLES\r\n"
" \r\n"
"EXAMPLES:\r\n"
" * To ping the target host with 64 bytes data:\r\n"
" fs0:\> ping -l 64 192.168.0.1\r\n"
" \r\n"
" * To ping the target host by sending 20 echo request datagrams:\r\n"
" fs0:\> ping -n 20 202.120.100.1\r\n"
".SH RETURNVALUES\r\n"
" \r\n"
"RETURN VALUES:\r\n"
" SHELL_SUCCESS The action was completed as requested.\r\n"
" SHELL_INVALID_PARAMETER One of the passed-in parameters was incorrectly\r\n"
" formatted or its value was out of bounds.\r\n"
#string STR_IFCONFIG_GET_NIC_FAIL #language en-US "%HIfConfig%N: Unable to retrieve all NICs' configure data, %r\n"
#string STR_IFCONFIG_INTERFACE_NOT_FOUND #language en-US "%HIfConfig%N: The specified interface %H%s%N doesn't exist, use IfConfig -l to list the interfaces.\n"
#string STR_IFCONFIG_INTERFACE_CONFIGURED #language en-US "%HIfConfig%N: Interface %H%s%N is already configured as DHCP. Clean the configuration first.\n"
#string STR_IFCONFIG_INVALID_IP_STR #language en-US "%HIfConfig%N: Invalid IP address, %s\n"
#string STR_IFCONFIG_INVALID_ADDR_PAIR #language en-US "%HIfConfig%N: The IP/netmask pair is incorrect.\n"
#string STR_IFCONFIG_INVALID_GATEWAY #language en-US "%HIfConfig%N: Invalid gateway address.\n"
#string STR_IFCONFIG_SET_FAIL #language en-US "%HIfConfig%N: Unable to set the NIC configure parameters, %r\n"
#string STR_IFCONFIG_START_SET_ADDR #language en-US "Create an IP and start to get the default address.\n"
#string STR_IFCONFIG_IP_CHILD_FAIL #language en-US "%HIfConfig%N: Unable to create an IP child to start auto-config, %r\n"
#string STR_IFCONFIG_WAIT_SET_DONE #language en-US "Please wait, your console might stop responding for a while ...\n"
#string STR_IFCONFIG_GET_DEF_ADDR_FAIL #language en-US "Unable to get default IP.\n"
#string STR_IFCONFIG_NIC_NAME #language en-US "%s\n"
#string STR_IFCONFIG_NIC_NOT_CONFIGURED #language en-US " Not configured.\n"
#string STR_IFCONFIG_CONFIG_SOURCE #language en-US " Source : %s\n"
#string STR_IFCONFIG_PERMANENT_STATUS #language en-US " Permanent : %s\n"
#string STR_IFCONFIG_ROUTES_SIZE #language en-US " Routes (%d entries):\n"
#string STR_IFCONFIG_ROUTES_ENTRY_INDEX #language en-US " Entry[%d]\n"
#string STR_IFCONFIG_CONF_IP_ADDR #language en-US "IfConfig: IP address conflict with MAC: %02x-%02x-%02x-%02x-%02x-%02x\n"
#string STR_IFCONFIG_SHOW_IP_ADDR #language en-US "%13s: %N%d.%d.%d.%d\n"
#string STR_IFCONFIG_SHOW_MAC_ADDR #language en-US " MAC : %02x-%02x-%02x-%02x-%02x-%02x\n"
#string STR_IFCONFIG_LINE_HELP #language en-US "Modify the default IP address of the UEFI network stack."
#string STR_GET_HELP_IFCONFIG #language en-US ""
".TH ifconfig 0 "Modifies the default IP address of the UEFI IPv4 Network Stack."\r\n"
".SH NAME\r\n"
"Modifies the default IP address of the UEFI IPv4 Network Stack.\r\n"
".SH SYNOPSIS\r\n"
" \r\n"
"IFCONFIG [-c [Name]] [-l [Name]]\r\n"
"IFCONFIG [-s <Name> dhcp | <static <IP> <Mask> <Gateway>> [permanent]]\r\n"
".SH OPTIONS\r\n"
" \r\n"
" -c - Clears the configuration.\r\n"
" -l - Lists the configuration.\r\n"
" -s - Sets the configuration.\r\n"
" Name - Specifies an adapter name (for example, eth0).\r\n"
" IP - Specifies the IPv4 address in four integer values:\r\n"
" - Example: 192.168.0.10\r\n"
" SubnetMask - Specifies a subnet mask in four integer values:\r\n"
" - Example: 255.255.255.0\r\n"
" GatewayMask - Specifies a default gateway in four integer values:\r\n"
" - Example: 192.168.0.1\r\n"
".SH DESCRIPTION\r\n"
" \r\n"
"NOTES:\r\n"
" 1. This command modifies the default IP address for the UEFI IP4\r\n"
" network stack.\r\n"
" 2. Use '-c' to clear the configuration for all interfaces or a specified\r\n"
" interface. This causes the network stack for the related interface to\r\n"
" default to DHCP.\r\n"
" 3. Use '-l' to list the DNS and other address related settings for all\r\n"
" interfaces or the specified interface.\r\n"
" 4. Use '-s <Name> static <IP> <SubnetMask> <GatewayMask> [permanent]' with \r\n"
" static IP4 address configuration for all or specified interface.\r\n"
" If permanent is not present, the configuration is one-time only, otherwise\r\n"
" this configuration request will survive a network stack reload.\r\n"
" 5. Use '-s <Name> dhcp [permanent]' for DHCP4 to request the IP4 address\r\n"
" configuration dynamically for all interface or specified interface.\r\n"
" If permanent is not present, the configuration is one-time only, otherwise\r\n"
" this configuration request will survive a network stack reload.\r\n"
".SH EXAMPLES\r\n"
" \r\n"
"EXAMPLES:\r\n"
" * To list the configuration for the eth0 interface:\r\n"
" fs0:\> ifconfig -l eth0\r\n"
" \r\n"
" * To use DHCP4 to request the IPv4 address configuration dynamically for the\r\n"
" eth0 interface:\r\n"
" fs0:\> ifconfig -s eth0 dhcp\r\n"
" \r\n"
" * To use the static IPv4 address configuration for the eth0 interface, and\r\n"
" make the configuration permanent:\r\n"
" fs0:\> ifconfig -s eth0 static 192.168.0.5 255.255.255.0 192.168.0.1\r\n"
" permanent\r\n"
Reference in New Issue View Git Blame Copy Permalink