system76-edk2/QuarkPlatformPkg/Library/Tpm12DeviceLibAtmelI2c/TisPc.c

/** @file
  Basic TIS (TPM Interface Specification) functions for Atmel I2C TPM.

  Copyright (c) 2016 - 2017, Intel Corporation. All rights reserved.<BR>
  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <PiPei.h>
#include <Library/Tpm12DeviceLib.h>
#include <Library/BaseLib.h>
#include <Library/TimerLib.h>
#include <Library/DebugLib.h>
#include <Library/I2cLib.h>

//
// Atmel I2C TPM slave address
//
#define ATMEL_I2C_TPM_SLAVE_ADDRESS      0x29

//
// Maximum I2C transfer size for Atmel I2C TPM
//
#define ATMEL_I2C_TPM_MAX_TRANSFER_SIZE  0x10

//
// Default TimeOut values in microseconds
//
#define TIS_TIMEOUT_A  ( 750 * 1000)  // 750ms
#define TIS_TIMEOUT_B  (2000 * 1000)  // 2s
#define TIS_TIMEOUT_C  ( 750 * 1000)  // 750ms
#define TIS_TIMEOUT_D  ( 750 * 1000)  // 750ms

/**
  Send command to Atmel I2c TPM breaking request up into multiple I2C transfers
  if required.

  @param[in] Buffer  Pointer to TPM command data.
  @param[in] Length  Number of bytes of TPM command data.

  @retval EFI_SUCCESS    TPM command sent.
  @retval EFI_NOT_FOUND  TPM chip doesn't exit.
  @retval EFI_TIMEOUT    Can't get the TPM control in time.
**/
EFI_STATUS
WriteTpmBufferMultiple (
  IN UINT8  *Buffer,
  IN UINTN  Length
  )
{
  EFI_STATUS              Status;
  EFI_I2C_DEVICE_ADDRESS  I2CDeviceAddr;
  UINTN                   Index;
  UINTN                   PartialLength;

  Status = EFI_SUCCESS;

  I2CDeviceAddr.I2CDeviceAddress = ATMEL_I2C_TPM_SLAVE_ADDRESS;

  DEBUG ((EFI_D_VERBOSE, "WriteTpmBufferMultiple: Addr=%02x  Length=%02x\n", I2CDeviceAddr.I2CDeviceAddress, Length));

  for (PartialLength = 0; Length > 0; Length -= PartialLength, Buffer += PartialLength) {
    //
    // Write data to TPM.
    //
    PartialLength = MIN (Length, ATMEL_I2C_TPM_MAX_TRANSFER_SIZE);
    Status = I2cWriteMultipleByte (
      I2CDeviceAddr,
      EfiI2CSevenBitAddrMode,
      &PartialLength,
      Buffer
      );
    DEBUG ((EFI_D_VERBOSE, "  "));
    for (Index = 0; Index < PartialLength; Index++) {
      DEBUG ((EFI_D_VERBOSE, "%02x ", Buffer[Index]));
    }
    DEBUG ((EFI_D_VERBOSE, "\n"));
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_VERBOSE, "  Status = %r\n", Status));
      return Status;
    }
  }

  DEBUG ((EFI_D_VERBOSE, "  Status = %r\n", Status));
  return Status;
}

/**
  Receive a response to a command from Atmel I2c TPM breaking response into
  multiple I2C transfers if required.

  @param[out] Buffer  Pointer to TPM response data.
  @param[in]  Length  Maximum number of bytes to receive.

  @retval EFI_SUCCESS    TPM response received.
  @retval EFI_NOT_FOUND  TPM chip doesn't exit.
  @retval EFI_TIMEOUT    Can't get the TPM control in time.
**/
EFI_STATUS
ReadTpmBufferMultiple (
  OUT UINT8  *Buffer,
  IN  UINTN  Length
  )
{
  EFI_STATUS              Status;
  EFI_I2C_DEVICE_ADDRESS  I2CDeviceAddr;
  UINTN                   WriteLength;
  UINTN                   Index;
  UINTN                   PartialLength;

  Status = EFI_SUCCESS;

  I2CDeviceAddr.I2CDeviceAddress = ATMEL_I2C_TPM_SLAVE_ADDRESS;
  WriteLength = 0;

  DEBUG ((EFI_D_VERBOSE, "ReadTpmBufferMultiple: Addr=%02x  Length=%02x\n", I2CDeviceAddr.I2CDeviceAddress, Length));

  for (PartialLength = 0; Length > 0; Length -= PartialLength, Buffer += PartialLength) {
    //
    // Read data from TPM.
    //
    PartialLength = MIN (Length, ATMEL_I2C_TPM_MAX_TRANSFER_SIZE);
    Status = I2cReadMultipleByte (
      I2CDeviceAddr,
      EfiI2CSevenBitAddrMode,
      &WriteLength,
      &PartialLength,
      Buffer
      );
    if (!EFI_ERROR (Status)) {
      DEBUG ((EFI_D_VERBOSE, "  "));
      for (Index = 0; Index < PartialLength; Index++) {
        DEBUG ((EFI_D_VERBOSE, "%02x ", Buffer[Index]));
      }
      DEBUG ((EFI_D_VERBOSE, "\n"));
    }
    if (EFI_ERROR (Status)) {
      DEBUG ((EFI_D_VERBOSE, "  Status = %r\n", Status));
      return Status;
    }
  }

  DEBUG ((EFI_D_VERBOSE, "  Status = %r\n", Status));
  return Status;
}

/**
  This service requests use TPM12.

  @retval EFI_SUCCESS       Get the control of TPM12 chip.
  @retval EFI_NOT_FOUND     TPM12 not found.
  @retval EFI_DEVICE_ERROR  Unexpected device behavior.
**/
EFI_STATUS
EFIAPI
Tpm12RequestUseTpm (
  VOID
  )
{
  EFI_STATUS                 Status;
  UINT8                      Data;
  UINT64                     Current;
  UINT64                     Previous;
  UINT64                     Total;
  UINT64                     Start;
  UINT64                     End;
  UINT64                     Timeout;
  INT64                      Cycle;
  INT64                      Delta;

  //
  // Get the current timer value
  //
  Current = GetPerformanceCounter();

  //
  // Initialize local variables
  //
  Start = 0;
  End   = 0;
  Total = 0;

  //
  // Retrieve the performance counter properties and compute the number of
  // performance counter ticks required to reach the maximum TIS timeout of
  // TIS_TIMEOUT_A.  TIS_TIMEOUT_A is in microseconds.
  //
  Timeout = DivU64x32 (
              MultU64x32 (
                GetPerformanceCounterProperties (&Start, &End),
                TIS_TIMEOUT_A
                ),
              1000000
              );
  Cycle = End - Start;
  if (Cycle < 0) {
    Cycle = -Cycle;
  }
  Cycle++;

  //
  // Attempt to read a byte from the Atmel I2C TPM
  //
  do {
    Status = ReadTpmBufferMultiple (&Data, sizeof(Data));

    Previous = Current;
    Current  = GetPerformanceCounter();
    Delta = (INT64) (Current - Previous);
    if (Start > End) {
      Delta = -Delta;
    }
    if (Delta < 0) {
      Delta += Cycle;
    }
    Total += Delta;
    if (Total >= Timeout) {
      Status = EFI_TIMEOUT;
      DEBUG ((EFI_D_ERROR, "Atmel I2C TPM failed to read: %r\n", Status));
      return Status;
    }
  } while (EFI_ERROR (Status));

  return EFI_SUCCESS;
}

/**
  This service enables the sending of commands to the TPM12.

  @param[in]     InputParameterBlockSize   Size of the TPM12 input parameter block.
  @param[in]     InputParameterBlock       Pointer to the TPM12 input parameter block.
  @param[in,out] OutputParameterBlockSize  Size of the TPM12 output parameter block.
  @param[in]     OutputParameterBlock      Pointer to the TPM12 output parameter block.

  @retval EFI_SUCCESS           The command byte stream was successfully sent to
                                the device and a response was successfully received.
  @retval EFI_DEVICE_ERROR      The command was not successfully sent to the
                                device or a response was not successfully received
                                from the device.
  @retval EFI_BUFFER_TOO_SMALL  The output parameter block is too small.
**/
EFI_STATUS
EFIAPI
Tpm12SubmitCommand (
  IN UINT32      InputParameterBlockSize,
  IN UINT8       *InputParameterBlock,
  IN OUT UINT32  *OutputParameterBlockSize,
  IN UINT8       *OutputParameterBlock
  )
{
  EFI_STATUS           Status;
  UINT32               TpmOutSize;
  TPM_RSP_COMMAND_HDR  *ResponseHeader;
  UINT64               Current;
  UINT64               Previous;
  UINT64               Total;
  UINT64               Start;
  UINT64               End;
  UINT64               Timeout;
  INT64                Cycle;
  INT64                Delta;

  //
  // Initialize local variables
  //
  Start   = 0;
  End     = 0;
  Total   = 0;

  //
  // Make sure response buffer is big enough to hold a response header
  //
  if (*OutputParameterBlockSize < sizeof (TPM_RSP_COMMAND_HDR)) {
    Status = EFI_BUFFER_TOO_SMALL;
    goto Done;
  }

  //
  // Get the current timer value
  //
  Current = GetPerformanceCounter();

  //
  // Retrieve the performance counter properties and compute the number of
  // performance counter ticks required to reach the maximum TIS timeout of
  // TIS_TIMEOUT_A.  TIS_TIMEOUT_A is in microseconds.
  //
  Timeout = DivU64x32 (
              MultU64x32 (
                GetPerformanceCounterProperties (&Start, &End),
                TIS_TIMEOUT_A
                ),
              1000000
              );
  Cycle = End - Start;
  if (Cycle < 0) {
    Cycle = -Cycle;
  }
  Cycle++;

  //
  // Send command
  //
  do {
    Status = WriteTpmBufferMultiple (InputParameterBlock, InputParameterBlockSize);

    Previous = Current;
    Current  = GetPerformanceCounter();
    Delta = (INT64) (Current - Previous);
    if (Start > End) {
      Delta = -Delta;
    }
    if (Delta < 0) {
      Delta += Cycle;
    }
    Total += Delta;
    if (Total >= Timeout) {
      Status = EFI_TIMEOUT;
      goto Done;
    }
  } while (EFI_ERROR (Status));

  //
  // Receive response header
  //
  do {
    Status = ReadTpmBufferMultiple (OutputParameterBlock, sizeof (TPM_RSP_COMMAND_HDR));

    Previous = Current;
    Current  = GetPerformanceCounter();
    Delta = (INT64) (Current - Previous);
    if (Start > End) {
      Delta = -Delta;
    }
    if (Delta < 0) {
      Delta += Cycle;
    }
    Total += Delta;
    if (Total >= Timeout) {
      Status = EFI_TIMEOUT;
      goto Done;
    }
  } while (EFI_ERROR (Status));

  //
  // Check the response data header (tag, parasize and returncode)
  //
  ResponseHeader = (TPM_RSP_COMMAND_HDR *)OutputParameterBlock;
  if (SwapBytes16 (ReadUnaligned16 (&ResponseHeader->tag)) != TPM_TAG_RSP_COMMAND) {
    Status = EFI_DEVICE_ERROR;
    goto Done;
  }

  TpmOutSize = SwapBytes32 (ReadUnaligned32 (&ResponseHeader->paramSize));
  if (TpmOutSize == sizeof (TPM_RSP_COMMAND_HDR)) {
    *OutputParameterBlockSize = TpmOutSize;
    Status = EFI_SUCCESS;
    goto Done;
  }
  if (TpmOutSize < sizeof (TPM_RSP_COMMAND_HDR)) {
    Status = EFI_DEVICE_ERROR;
    goto Done;
  }
  if (*OutputParameterBlockSize < TpmOutSize) {
    Status = EFI_BUFFER_TOO_SMALL;
    goto Done;
  }
  *OutputParameterBlockSize = TpmOutSize;

  //
  // Receive the remaining data in the response header
  //
  do {
    Status = ReadTpmBufferMultiple (
               OutputParameterBlock + sizeof (TPM_RSP_COMMAND_HDR),
               TpmOutSize - sizeof (TPM_RSP_COMMAND_HDR)
               );

    Previous = Current;
    Current  = GetPerformanceCounter();
    Delta = (INT64) (Current - Previous);
    if (Start > End) {
      Delta = -Delta;
    }
    if (Delta < 0) {
      Delta += Cycle;
    }
    Total += Delta;
    if (Total >= Timeout) {
      Status = EFI_TIMEOUT;
      goto Done;
    }
  } while (EFI_ERROR (Status));

Done:
  DEBUG ((
    EFI_D_VERBOSE,
    "Tpm12SubmitCommand() Status = %r  Time = %ld ms\n",
    Status,
    DivU64x64Remainder (
      MultU64x32 (Total, 1000),
      GetPerformanceCounterProperties (NULL, NULL),
      NULL
      )
    ));

  return Status;
}