sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
7d0f92e8fd68e1f1242f36c203400be23954d563
system76-edk2/MdeModulePkg/Bus/Ufs/UfsBlockIoPei/UfsHci.c
Feng Tian 0591696eff MdeModulePkg: Add UFS (Universal Flash Storage) Stack 
It includes 4 drivers:
1. UfsPassThruDxe, which is a UEFI driver and consumes EFI_UFS_HOST_CONTROLLER_PROTOCOL and produces EFI_EXT_SCSI_PASS_THRU_PROTOCOL
2. UfsPciHcDxe, which is specific for pci-based UFS HC implementation and is a UEFI driver to produce EFI_UFS_HOST_CONTROLLER_PROTOCOL.
3. UfsBlockIoPei, which is a PEI driver and consumes EFI_UFS_HOST_CONTROLLER_PPI and produces EFI_PEI_VIRTUAL_BLOCK_IO_PPI.
4. UfsPciHcPei, which is specific for pci-based UFS HC implementation and is a PEI driver to produce EFI_UFS_HOST_CONTROLLER_PPI.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17246 6f19259b-4bc3-4df7-8a09-765794883524
2015-04-29 02:42:58 +00:00

1788 lines
56 KiB
C
Raw Blame History

/** @file
Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "UfsBlockIoPei.h"
/**
Wait for the value of the specified system memory set to the test value.
@param Address The system memory address to test.
@param MaskValue The mask value of memory.
@param TestValue The test value of memory.
@param Timeout The time out value for wait memory set, uses 100ns as a unit.
@retval EFI_TIMEOUT The system memory setting is time out.
@retval EFI_SUCCESS The system memory is correct set.
**/
EFI_STATUS
EFIAPI
UfsWaitMemSet (
IN UINTN Address,
IN UINT32 MaskValue,
IN UINT32 TestValue,
IN UINT64 Timeout
)
{
UINT32 Value;
UINT64 Delay;
BOOLEAN InfiniteWait;
if (Timeout == 0) {
InfiniteWait = TRUE;
} else {
InfiniteWait = FALSE;
}
Delay = DivU64x32 (Timeout, 10) + 1;
do {
//
// Access PCI MMIO space to see if the value is the tested one.
//
Value = MmioRead32 (Address) & MaskValue;
if (Value == TestValue) {
return EFI_SUCCESS;
}
//
// Stall for 1 microseconds.
//
MicroSecondDelay (1);
Delay--;
} while (InfiniteWait || (Delay > 0));
return EFI_TIMEOUT;
}
/**
Dump UIC command execution result for debugging.
@param[in] UicOpcode The executed UIC opcode.
@param[in] Result The result to be parsed.
**/
VOID
DumpUicCmdExecResult (
IN UINT8 UicOpcode,
IN UINT8 Result
)
{
if (UicOpcode <= UfsUicDmePeerSet) {
switch (Result) {
case 0x00:
break;
case 0x01:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - INVALID_MIB_ATTRIBUTE\n"));
break;
case 0x02:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - INVALID_MIB_ATTRIBUTE_VALUE\n"));
break;
case 0x03:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - READ_ONLY_MIB_ATTRIBUTE\n"));
break;
case 0x04:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - WRITE_ONLY_MIB_ATTRIBUTE\n"));
break;
case 0x05:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - BAD_INDEX\n"));
break;
case 0x06:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - LOCKED_MIB_ATTRIBUTE\n"));
break;
case 0x07:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - BAD_TEST_FEATURE_INDEX\n"));
break;
case 0x08:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - PEER_COMMUNICATION_FAILURE\n"));
break;
case 0x09:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - BUSY\n"));
break;
case 0x0A:
DEBUG ((EFI_D_VERBOSE, "UIC configuration command fails - DME_FAILURE\n"));
break;
default :
ASSERT (FALSE);
break;
}
} else {
switch (Result) {
case 0x00:
break;
case 0x01:
DEBUG ((EFI_D_VERBOSE, "UIC control command fails - FAILURE\n"));
break;
default :
ASSERT (FALSE);
break;
}
}
}
/**
Dump QUERY RESPONSE UPIU result for debugging.
@param[in] Result The result to be parsed.
**/
VOID
DumpQueryResponseResult (
IN UINT8 Result
)
{
switch (Result) {
case 0xF6:
DEBUG ((EFI_D_VERBOSE, "Query Response with Parameter Not Readable\n"));
break;
case 0xF7:
DEBUG ((EFI_D_VERBOSE, "Query Response with Parameter Not Writeable\n"));
break;
case 0xF8:
DEBUG ((EFI_D_VERBOSE, "Query Response with Parameter Already Written\n"));
break;
case 0xF9:
DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Length\n"));
break;
case 0xFA:
DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Value\n"));
break;
case 0xFB:
DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Selector\n"));
break;
case 0xFC:
DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Index\n"));
break;
case 0xFD:
DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Idn\n"));
break;
case 0xFE:
DEBUG ((EFI_D_VERBOSE, "Query Response with Invalid Opcode\n"));
break;
case 0xFF:
DEBUG ((EFI_D_VERBOSE, "Query Response with General Failure\n"));
break;
default :
ASSERT (FALSE);
break;
}
}
/**
Swap little endian to big endian.
@param[in, out] Buffer The data buffer. In input, it contains little endian data.
In output, it will become big endian.
@param[in] BufferSize The length of converted data.
**/
VOID
SwapLittleEndianToBigEndian (
IN OUT UINT8 *Buffer,
IN UINT32 BufferSize
)
{
UINT32 Index;
UINT8 Temp;
UINT32 SwapCount;
SwapCount = BufferSize / 2;
for (Index = 0; Index < SwapCount; Index++) {
Temp = Buffer[Index];
Buffer[Index] = Buffer[BufferSize - 1 - Index];
Buffer[BufferSize - 1 - Index] = Temp;
}
}
/**
Fill TSF field of QUERY REQUEST UPIU.
@param[in, out] TsfBase The base address of TSF field of QUERY REQUEST UPIU.
@param[in] Opcode The opcode of request.
@param[in] DescId The descriptor ID of request.
@param[in] Index The index of request.
@param[in] Selector The selector of request.
@param[in] Length The length of transferred data. The maximum is 4.
@param[in] Value The value of transferred data.
**/
VOID
UfsFillTsfOfQueryReqUpiu (
IN OUT UTP_UPIU_TSF *TsfBase,
IN UINT8 Opcode,
IN UINT8 DescId OPTIONAL,
IN UINT8 Index OPTIONAL,
IN UINT8 Selector OPTIONAL,
IN UINT16 Length OPTIONAL,
IN UINT32 Value OPTIONAL
)
{
ASSERT (TsfBase != NULL);
ASSERT (Opcode <= UtpQueryFuncOpcodeTogFlag);
TsfBase->Opcode = Opcode;
if (Opcode != UtpQueryFuncOpcodeNop) {
TsfBase->DescId = DescId;
TsfBase->Index = Index;
TsfBase->Selector = Selector;
if ((Opcode == UtpQueryFuncOpcodeRdDesc) || (Opcode == UtpQueryFuncOpcodeWrDesc)) {
SwapLittleEndianToBigEndian ((UINT8*)&Length, sizeof (Length));
TsfBase->Length = Length;
}
if (Opcode == UtpQueryFuncOpcodeWrAttr) {
SwapLittleEndianToBigEndian ((UINT8*)&Value, sizeof (Value));
TsfBase->Value = Value;
}
}
}
/**
Initialize COMMAND UPIU.
@param[in, out] Command The base address of COMMAND UPIU.
@param[in] Lun The Lun on which the SCSI command is executed.
@param[in] TaskTag The task tag of request.
@param[in] Cdb The cdb buffer containing SCSI command.
@param[in] CdbLength The cdb length.
@param[in] DataDirection The direction of data transfer.
@param[in] ExpDataTranLen The expected transfer data length.
@retval EFI_SUCCESS The initialization succeed.
**/
EFI_STATUS
UfsInitCommandUpiu (
IN OUT UTP_COMMAND_UPIU *Command,
IN UINT8 Lun,
IN UINT8 TaskTag,
IN UINT8 *Cdb,
IN UINT8 CdbLength,
IN UFS_DATA_DIRECTION DataDirection,
IN UINT32 ExpDataTranLen
)
{
UINT8 Flags;
ASSERT ((Command != NULL) && (Cdb != NULL));
//
// Task attribute is hard-coded to Ordered.
//
if (DataDirection == UfsDataIn) {
Flags = BIT0 | BIT6;
} else if (DataDirection == UfsDataOut) {
Flags = BIT0 | BIT5;
} else {
Flags = BIT0;
}
//
// Fill UTP COMMAND UPIU associated fields.
//
Command->TransCode = 0x01;
Command->Flags = Flags;
Command->Lun = Lun;
Command->TaskTag = TaskTag;
Command->CmdSet = 0x00;
SwapLittleEndianToBigEndian ((UINT8*)&ExpDataTranLen, sizeof (ExpDataTranLen));
Command->ExpDataTranLen = ExpDataTranLen;
CopyMem (Command->Cdb, Cdb, CdbLength);
return EFI_SUCCESS;
}
/**
Initialize UTP PRDT for data transfer.
@param[in] Prdt The base address of PRDT.
@param[in] Buffer The buffer to be read or written.
@param[in] BufferSize The data size to be read or written.
@retval EFI_SUCCESS The initialization succeed.
**/
EFI_STATUS
UfsInitUtpPrdt (
IN UTP_TR_PRD *Prdt,
IN VOID *Buffer,
IN UINT32 BufferSize
)
{
UINT32 PrdtIndex;
UINT32 RemainingLen;
UINT8 *Remaining;
UINTN PrdtNumber;
if (BufferSize == 0) {
return EFI_SUCCESS;
}
ASSERT (((UINTN)Buffer & (BIT0 | BIT1)) == 0);
RemainingLen = BufferSize;
Remaining = Buffer;
PrdtNumber = (UINTN)DivU64x32 ((UINT64)BufferSize + UFS_MAX_DATA_LEN_PER_PRD - 1, UFS_MAX_DATA_LEN_PER_PRD);
for (PrdtIndex = 0; PrdtIndex < PrdtNumber; PrdtIndex++) {
if (RemainingLen < UFS_MAX_DATA_LEN_PER_PRD) {
Prdt[PrdtIndex].DbCount = (UINT32)RemainingLen - 1;
} else {
Prdt[PrdtIndex].DbCount = UFS_MAX_DATA_LEN_PER_PRD - 1;
}
Prdt[PrdtIndex].DbAddr = (UINT32)RShiftU64 ((UINT64)(UINTN)Remaining, 2);
Prdt[PrdtIndex].DbAddrU = (UINT32)RShiftU64 ((UINT64)(UINTN)Remaining, 32);
RemainingLen -= UFS_MAX_DATA_LEN_PER_PRD;
Remaining += UFS_MAX_DATA_LEN_PER_PRD;
}
return EFI_SUCCESS;
}
/**
Initialize QUERY REQUEST UPIU.
@param[in, out] QueryReq The base address of QUERY REQUEST UPIU.
@param[in] TaskTag The task tag of request.
@param[in] Opcode The opcode of request.
@param[in] DescId The descriptor ID of request.
@param[in] Index The index of request.
@param[in] Selector The selector of request.
@param[in] DataSize The data size to be read or written.
@param[in] Data The buffer to be read or written.
@retval EFI_SUCCESS The initialization succeed.
**/
EFI_STATUS
UfsInitQueryRequestUpiu (
IN OUT UTP_QUERY_REQ_UPIU *QueryReq,
IN UINT8 TaskTag,
IN UINT8 Opcode,
IN UINT8 DescId,
IN UINT8 Index,
IN UINT8 Selector,
IN UINTN DataSize OPTIONAL,
IN UINT8 *Data OPTIONAL
)
{
ASSERT (QueryReq != NULL);
QueryReq->TransCode = 0x16;
QueryReq->TaskTag = TaskTag;
if ((Opcode == UtpQueryFuncOpcodeRdDesc) || (Opcode == UtpQueryFuncOpcodeRdFlag) || (Opcode == UtpQueryFuncOpcodeRdAttr)) {
QueryReq->QueryFunc = QUERY_FUNC_STD_READ_REQ;
} else {
QueryReq->QueryFunc = QUERY_FUNC_STD_WRITE_REQ;
}
if (Opcode == UtpQueryFuncOpcodeWrAttr) {
UfsFillTsfOfQueryReqUpiu (&QueryReq->Tsf, Opcode, DescId, Index, Selector, 0, *(UINT32*)Data);
} else if ((Opcode == UtpQueryFuncOpcodeRdDesc) || (Opcode == UtpQueryFuncOpcodeWrDesc)) {
UfsFillTsfOfQueryReqUpiu (&QueryReq->Tsf, Opcode, DescId, Index, Selector, (UINT16)DataSize, 0);
} else {
UfsFillTsfOfQueryReqUpiu (&QueryReq->Tsf, Opcode, DescId, Index, Selector, 0, 0);
}
if (Opcode == UtpQueryFuncOpcodeWrDesc) {
CopyMem (QueryReq + 1, Data, DataSize);
}
return EFI_SUCCESS;
}
/**
Allocate COMMAND/RESPONSE UPIU for filling UTP TRD's command descriptor field.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The Lun on which the SCSI command is executed.
@param[in] Packet The pointer to the UFS_SCSI_REQUEST_PACKET data structure.
@param[in] Trd The pointer to the UTP Transfer Request Descriptor.
@retval EFI_SUCCESS The creation succeed.
@retval EFI_DEVICE_ERROR The creation failed.
@retval EFI_OUT_OF_RESOURCES The memory resource is insufficient.
**/
EFI_STATUS
UfsCreateScsiCommandDesc (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 Lun,
IN UFS_SCSI_REQUEST_PACKET *Packet,
IN UTP_TRD *Trd
)
{
UINT8 *CommandDesc;
UINTN TotalLen;
UINTN PrdtNumber;
VOID *Buffer;
UINT32 Length;
UTP_COMMAND_UPIU *CommandUpiu;
UTP_TR_PRD *PrdtBase;
UFS_DATA_DIRECTION DataDirection;
ASSERT ((Private != NULL) && (Packet != NULL) && (Trd != NULL));
if (Packet->DataDirection == UfsDataIn) {
Buffer = Packet->InDataBuffer;
Length = Packet->InTransferLength;
DataDirection = UfsDataIn;
} else {
Buffer = Packet->OutDataBuffer;
Length = Packet->OutTransferLength;
DataDirection = UfsDataOut;
}
if (Length == 0) {
DataDirection = UfsNoData;
}
PrdtNumber = (UINTN)DivU64x32 ((UINT64)Length + UFS_MAX_DATA_LEN_PER_PRD - 1, UFS_MAX_DATA_LEN_PER_PRD);
TotalLen = ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU)) + PrdtNumber * sizeof (UTP_TR_PRD);
CommandDesc = UfsPeimAllocateMem (Private->Pool, TotalLen);
if (CommandDesc == NULL) {
return EFI_OUT_OF_RESOURCES;
}
CommandUpiu = (UTP_COMMAND_UPIU*)CommandDesc;
PrdtBase = (UTP_TR_PRD*)(CommandDesc + ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU)));
UfsInitCommandUpiu (CommandUpiu, Lun, Private->TaskTag++, Packet->Cdb, Packet->CdbLength, DataDirection, Length);
UfsInitUtpPrdt (PrdtBase, Buffer, Length);
//
// Fill UTP_TRD associated fields
// NOTE: Some UFS host controllers request the Response UPIU and the Physical Region Description Table
// *MUST* be located at a 64-bit aligned boundary.
//
Trd->Int = UFS_INTERRUPT_COMMAND;
Trd->Dd = DataDirection;
Trd->Ct = UFS_STORAGE_COMMAND_TYPE;
Trd->UcdBa = (UINT32)RShiftU64 ((UINT64)(UINTN)CommandUpiu, 7);
Trd->UcdBaU = (UINT32)RShiftU64 ((UINT64)(UINTN)CommandUpiu, 32);
Trd->RuL = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU)), sizeof (UINT32));
Trd->RuO = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)), sizeof (UINT32));
Trd->PrdtL = (UINT16)PrdtNumber;
Trd->PrdtO = (UINT16)DivU64x32 ((UINT64)(ROUNDUP8 (sizeof (UTP_COMMAND_UPIU)) + ROUNDUP8 (sizeof (UTP_RESPONSE_UPIU))), sizeof (UINT32));
return EFI_SUCCESS;
}
/**
Allocate QUERY REQUEST/QUERY RESPONSE UPIU for filling UTP TRD's command descriptor field.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Packet The pointer to the UFS_DEVICE_MANAGEMENT_REQUEST_PACKET data structure.
@param[in] Trd The pointer to the UTP Transfer Request Descriptor.
@retval EFI_SUCCESS The creation succeed.
@retval EFI_DEVICE_ERROR The creation failed.
@retval EFI_OUT_OF_RESOURCES The memory resource is insufficient.
@retval EFI_INVALID_PARAMETER The parameter passed in is invalid.
**/
EFI_STATUS
UfsCreateDMCommandDesc (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UFS_DEVICE_MANAGEMENT_REQUEST_PACKET *Packet,
IN UTP_TRD *Trd
)
{
UINT8 *CommandDesc;
UINTN TotalLen;
UTP_QUERY_REQ_UPIU *QueryReqUpiu;
UINT8 Opcode;
UINT32 DataSize;
UINT8 *Data;
UINT8 DataDirection;
ASSERT ((Private != NULL) && (Packet != NULL) && (Trd != NULL));
Opcode = Packet->Opcode;
if ((Opcode > UtpQueryFuncOpcodeTogFlag) || (Opcode == UtpQueryFuncOpcodeNop)) {
return EFI_INVALID_PARAMETER;
}
DataDirection = Packet->DataDirection;
if (DataDirection == UfsDataIn) {
DataSize = Packet->InTransferLength;
Data = Packet->InDataBuffer;
} else if (DataDirection == UfsDataOut) {
DataSize = Packet->OutTransferLength;
Data = Packet->OutDataBuffer;
} else {
DataSize = 0;
Data = NULL;
}
if (((Opcode != UtpQueryFuncOpcodeSetFlag) && (Opcode != UtpQueryFuncOpcodeClrFlag) && (Opcode != UtpQueryFuncOpcodeTogFlag))
&& ((DataSize == 0) || (Data == NULL))) {
return EFI_INVALID_PARAMETER;
}
if (((Opcode == UtpQueryFuncOpcodeSetFlag) || (Opcode == UtpQueryFuncOpcodeClrFlag) || (Opcode == UtpQueryFuncOpcodeTogFlag))
&& ((DataSize != 0) || (Data != NULL))) {
return EFI_INVALID_PARAMETER;
}
if ((Opcode == UtpQueryFuncOpcodeWrAttr) && (DataSize != sizeof (UINT32))) {
return EFI_INVALID_PARAMETER;
}
if ((Opcode == UtpQueryFuncOpcodeWrDesc) || (Opcode == UtpQueryFuncOpcodeRdDesc)) {
TotalLen = ROUNDUP8 (sizeof (UTP_QUERY_REQ_UPIU)) + ROUNDUP8 (sizeof (UTP_QUERY_RESP_UPIU)) + ROUNDUP8 (DataSize);
} else {
TotalLen = ROUNDUP8 (sizeof (UTP_QUERY_REQ_UPIU)) + ROUNDUP8 (sizeof (UTP_QUERY_RESP_UPIU));
}
CommandDesc = UfsPeimAllocateMem (Private->Pool, TotalLen);
if (CommandDesc == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// Initialize UTP QUERY REQUEST UPIU
//
QueryReqUpiu = (UTP_QUERY_REQ_UPIU*)CommandDesc;
UfsInitQueryRequestUpiu (
QueryReqUpiu,
Private->TaskTag++,
Opcode,
Packet->DescId,
Packet->Index,
Packet->Selector,
DataSize,
Data
);
//
// Fill UTP_TRD associated fields
// NOTE: Some UFS host controllers request the Query Response UPIU *MUST* be located at a 64-bit aligned boundary.
//
Trd->Int = UFS_INTERRUPT_COMMAND;
Trd->Dd = DataDirection;
Trd->Ct = UFS_STORAGE_COMMAND_TYPE;
Trd->Ocs = 0x0F;
Trd->UcdBa = (UINT32)RShiftU64 ((UINT64)(UINTN)QueryReqUpiu, 7);
Trd->UcdBaU = (UINT32)RShiftU64 ((UINT64)(UINTN)QueryReqUpiu, 32);
if (Opcode == UtpQueryFuncOpcodeWrDesc) {
Trd->RuL = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_QUERY_RESP_UPIU)), sizeof (UINT32));
Trd->RuO = (UINT16)DivU64x32 ((UINT64)(ROUNDUP8 (sizeof (UTP_QUERY_REQ_UPIU)) + ROUNDUP8 (DataSize)), sizeof (UINT32));
} else {
Trd->RuL = (UINT16)DivU64x32 ((UINT64)(ROUNDUP8 (sizeof (UTP_QUERY_RESP_UPIU)) + ROUNDUP8 (DataSize)), sizeof (UINT32));
Trd->RuO = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_QUERY_REQ_UPIU)), sizeof (UINT32));
}
return EFI_SUCCESS;
}
/**
Allocate NOP IN and NOP OUT UPIU for filling UTP TRD's command descriptor field.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Trd The pointer to the UTP Transfer Request Descriptor.
@retval EFI_SUCCESS The creation succeed.
@retval EFI_DEVICE_ERROR The creation failed.
@retval EFI_OUT_OF_RESOURCES The memory resource is insufficient.
**/
EFI_STATUS
UfsCreateNopCommandDesc (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UTP_TRD *Trd
)
{
UINT8 *CommandDesc;
UINTN TotalLen;
UTP_NOP_OUT_UPIU *NopOutUpiu;
ASSERT ((Private != NULL) && (Trd != NULL));
TotalLen = ROUNDUP8 (sizeof (UTP_NOP_OUT_UPIU)) + ROUNDUP8 (sizeof (UTP_NOP_IN_UPIU));
CommandDesc = UfsPeimAllocateMem (Private->Pool, TotalLen);
if (CommandDesc == NULL) {
return EFI_OUT_OF_RESOURCES;
}
NopOutUpiu = (UTP_NOP_OUT_UPIU*)CommandDesc;
NopOutUpiu->TaskTag = Private->TaskTag++;
//
// Fill UTP_TRD associated fields
// NOTE: Some UFS host controllers request the Nop Out UPIU *MUST* be located at a 64-bit aligned boundary.
//
Trd->Int = UFS_INTERRUPT_COMMAND;
Trd->Dd = 0x00;
Trd->Ct = UFS_STORAGE_COMMAND_TYPE;
Trd->UcdBa = (UINT32)RShiftU64 ((UINT64)(UINTN)NopOutUpiu, 7);
Trd->UcdBaU = (UINT32)RShiftU64 ((UINT64)(UINTN)NopOutUpiu, 32);
Trd->RuL = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_NOP_IN_UPIU)), sizeof (UINT32));
Trd->RuO = (UINT16)DivU64x32 ((UINT64)ROUNDUP8 (sizeof (UTP_NOP_OUT_UPIU)), sizeof (UINT32));
return EFI_SUCCESS;
}
/**
Find out available slot in transfer list of a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[out] Slot The available slot.
@retval EFI_SUCCESS The available slot was found successfully.
**/
EFI_STATUS
UfsFindAvailableSlotInTrl (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
OUT UINT8 *Slot
)
{
ASSERT ((Private != NULL) && (Slot != NULL));
//
// The simplest algo to always use slot 0.
// TODO: enhance it to support async transfer with multiple slot.
//
*Slot = 0;
return EFI_SUCCESS;
}
/**
Find out available slot in task management transfer list of a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[out] Slot The available slot.
@retval EFI_SUCCESS The available slot was found successfully.
**/
EFI_STATUS
UfsFindAvailableSlotInTmrl (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
OUT UINT8 *Slot
)
{
ASSERT ((Private != NULL) && (Slot != NULL));
//
// The simplest algo to always use slot 0.
// TODO: enhance it to support async transfer with multiple slot.
//
*Slot = 0;
return EFI_SUCCESS;
}
/**
Start specified slot in transfer list of a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Slot The slot to be started.
**/
VOID
UfsStartExecCmd (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 Slot
)
{
UINTN UfsHcBase;
UINTN Address;
UINT32 Data;
UfsHcBase = Private->UfsHcBase;
Address = UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
Data = MmioRead32 (Address);
if ((Data & UFS_HC_UTRLRSR) != UFS_HC_UTRLRSR) {
MmioWrite32 (Address, UFS_HC_UTRLRSR);
}
Address = UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
MmioWrite32 (Address, BIT0 << Slot);
}
/**
Stop specified slot in transfer list of a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Slot The slot to be stop.
**/
VOID
UfsStopExecCmd (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 Slot
)
{
UINTN UfsHcBase;
UINTN Address;
UINT32 Data;
UfsHcBase = Private->UfsHcBase;
Address = UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Data = MmioRead32 (Address);
if ((Data & (BIT0 << Slot)) != 0) {
Address = UfsHcBase + UFS_HC_UTRLCLR_OFFSET;
Data = MmioRead32 (Address);
MmioWrite32 (Address, (Data & ~(BIT0 << Slot)));
}
}
/**
Read or write specified device descriptor of a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Read The boolean variable to show r/w direction.
@param[in] DescId The ID of device descriptor.
@param[in] Index The Index of device descriptor.
@param[in] Selector The Selector of device descriptor.
@param[in, out] Descriptor The buffer of device descriptor to be read or written.
@param[in] DescSize The size of device descriptor buffer.
@retval EFI_SUCCESS The device descriptor was read/written successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to r/w the device descriptor.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of r/w the device descriptor.
**/
EFI_STATUS
UfsRwDeviceDesc (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN BOOLEAN Read,
IN UINT8 DescId,
IN UINT8 Index,
IN UINT8 Selector,
IN OUT VOID *Descriptor,
IN UINT32 DescSize
)
{
EFI_STATUS Status;
UFS_DEVICE_MANAGEMENT_REQUEST_PACKET Packet;
UINT8 Slot;
UTP_TRD *Trd;
UINTN Address;
UTP_QUERY_RESP_UPIU *QueryResp;
UINT8 *CmdDescBase;
UINT32 CmdDescSize;
UINT16 ReturnDataSize;
ZeroMem (&Packet, sizeof (UFS_DEVICE_MANAGEMENT_REQUEST_PACKET));
if (Read) {
Packet.DataDirection = UfsDataIn;
Packet.InDataBuffer = Descriptor;
Packet.InTransferLength = DescSize;
Packet.Opcode = UtpQueryFuncOpcodeRdDesc;
} else {
Packet.DataDirection = UfsDataOut;
Packet.OutDataBuffer = Descriptor;
Packet.OutTransferLength = DescSize;
Packet.Opcode = UtpQueryFuncOpcodeWrDesc;
}
Packet.DescId = DescId;
Packet.Index = Index;
Packet.Selector = Selector;
Packet.Timeout = UFS_TIMEOUT;
//
// Find out which slot of transfer request list is available.
//
Status = UfsFindAvailableSlotInTrl (Private, &Slot);
if (EFI_ERROR (Status)) {
return Status;
}
Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
//
// Fill transfer request descriptor to this slot.
//
Status = UfsCreateDMCommandDesc (Private, &Packet, Trd);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Check the transfer request result.
//
CmdDescBase = (UINT8 *)(UINTN)(LShiftU64 ((UINT64)Trd->UcdBaU, 32) | LShiftU64 ((UINT64)Trd->UcdBa, 7));
QueryResp = (UTP_QUERY_RESP_UPIU*)(CmdDescBase + Trd->RuO * sizeof (UINT32));
CmdDescSize = Trd->RuO * sizeof (UINT32) + Trd->RuL * sizeof (UINT32);
//
// Start to execute the transfer request.
//
UfsStartExecCmd (Private, Slot);
//
// Wait for the completion of the transfer request.
//
Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0, 0, Packet.Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
}
if (QueryResp->QueryResp != 0) {
DumpQueryResponseResult (QueryResp->QueryResp);
Status = EFI_DEVICE_ERROR;
goto Exit;
}
if (Trd->Ocs == 0) {
ReturnDataSize = QueryResp->Tsf.Length;
SwapLittleEndianToBigEndian ((UINT8*)&ReturnDataSize, sizeof (UINT16));
if (Read) {
CopyMem (Packet.InDataBuffer, (QueryResp + 1), ReturnDataSize);
Packet.InTransferLength = ReturnDataSize;
} else {
Packet.OutTransferLength = ReturnDataSize;
}
} else {
Status = EFI_DEVICE_ERROR;
}
Exit:
UfsStopExecCmd (Private, Slot);
UfsPeimFreeMem (Private->Pool, CmdDescBase, CmdDescSize);
return Status;
}
/**
Read or write specified attribute of a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Read The boolean variable to show r/w direction.
@param[in] AttrId The ID of Attribute.
@param[in] Index The Index of Attribute.
@param[in] Selector The Selector of Attribute.
@param[in, out] Attributes The value of Attribute to be read or written.
@retval EFI_SUCCESS The Attribute was read/written successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to r/w the Attribute.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of r/w the Attribute.
**/
EFI_STATUS
UfsRwAttributes (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN BOOLEAN Read,
IN UINT8 AttrId,
IN UINT8 Index,
IN UINT8 Selector,
IN OUT UINT32 *Attributes
)
{
EFI_STATUS Status;
UFS_DEVICE_MANAGEMENT_REQUEST_PACKET Packet;
UINT8 Slot;
UTP_TRD *Trd;
UINTN Address;
UTP_QUERY_RESP_UPIU *QueryResp;
UINT8 *CmdDescBase;
UINT32 CmdDescSize;
UINT32 ReturnData;
ZeroMem (&Packet, sizeof (UFS_DEVICE_MANAGEMENT_REQUEST_PACKET));
if (Read) {
Packet.DataDirection = UfsDataIn;
Packet.Opcode = UtpQueryFuncOpcodeRdAttr;
} else {
Packet.DataDirection = UfsDataOut;
Packet.Opcode = UtpQueryFuncOpcodeWrAttr;
}
Packet.DescId = AttrId;
Packet.Index = Index;
Packet.Selector = Selector;
Packet.Timeout = UFS_TIMEOUT;
//
// Find out which slot of transfer request list is available.
//
Status = UfsFindAvailableSlotInTrl (Private, &Slot);
if (EFI_ERROR (Status)) {
return Status;
}
Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
//
// Fill transfer request descriptor to this slot.
//
Status = UfsCreateDMCommandDesc (Private, &Packet, Trd);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Check the transfer request result.
//
CmdDescBase = (UINT8 *)(UINTN)(LShiftU64 ((UINT64)Trd->UcdBaU, 32) | LShiftU64 ((UINT64)Trd->UcdBa, 7));
QueryResp = (UTP_QUERY_RESP_UPIU*)(CmdDescBase + Trd->RuO * sizeof (UINT32));
CmdDescSize = Trd->RuO * sizeof (UINT32) + Trd->RuL * sizeof (UINT32);
//
// Start to execute the transfer request.
//
UfsStartExecCmd (Private, Slot);
//
// Wait for the completion of the transfer request.
//
Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0, 0, Packet.Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
}
if (QueryResp->QueryResp != 0) {
DumpQueryResponseResult (QueryResp->QueryResp);
Status = EFI_DEVICE_ERROR;
goto Exit;
}
if (Trd->Ocs == 0) {
ReturnData = QueryResp->Tsf.Value;
SwapLittleEndianToBigEndian ((UINT8*)&ReturnData, sizeof (UINT32));
*Attributes = ReturnData;
} else {
Status = EFI_DEVICE_ERROR;
}
Exit:
UfsStopExecCmd (Private, Slot);
UfsPeimFreeMem (Private->Pool, CmdDescBase, CmdDescSize);
return Status;
}
/**
Read or write specified flag of a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Read The boolean variable to show r/w direction.
@param[in] FlagId The ID of flag to be read or written.
@param[in, out] Value The value to set or clear flag.
@retval EFI_SUCCESS The flag was read/written successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to r/w the flag.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of r/w the flag.
**/
EFI_STATUS
UfsRwFlags (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN BOOLEAN Read,
IN UINT8 FlagId,
IN OUT UINT8 *Value
)
{
EFI_STATUS Status;
UFS_DEVICE_MANAGEMENT_REQUEST_PACKET Packet;
UINT8 Slot;
UTP_TRD *Trd;
UINTN Address;
UTP_QUERY_RESP_UPIU *QueryResp;
UINT8 *CmdDescBase;
UINT32 CmdDescSize;
if (Value == NULL) {
return EFI_INVALID_PARAMETER;
}
ZeroMem (&Packet, sizeof (UFS_DEVICE_MANAGEMENT_REQUEST_PACKET));
if (Read) {
ASSERT (Value != NULL);
Packet.DataDirection = UfsDataIn;
Packet.Opcode = UtpQueryFuncOpcodeRdFlag;
} else {
Packet.DataDirection = UfsDataOut;
if (*Value == 1) {
Packet.Opcode = UtpQueryFuncOpcodeSetFlag;
} else if (*Value == 0) {
Packet.Opcode = UtpQueryFuncOpcodeClrFlag;
} else {
return EFI_INVALID_PARAMETER;
}
}
Packet.DescId = FlagId;
Packet.Index = 0;
Packet.Selector = 0;
Packet.Timeout = UFS_TIMEOUT;
//
// Find out which slot of transfer request list is available.
//
Status = UfsFindAvailableSlotInTrl (Private, &Slot);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Fill transfer request descriptor to this slot.
//
Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
Status = UfsCreateDMCommandDesc (Private, &Packet, Trd);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Check the transfer request result.
//
CmdDescBase = (UINT8 *)(UINTN)(LShiftU64 ((UINT64)Trd->UcdBaU, 32) | LShiftU64 ((UINT64)Trd->UcdBa, 7));
QueryResp = (UTP_QUERY_RESP_UPIU*)(CmdDescBase + Trd->RuO * sizeof (UINT32));
CmdDescSize = Trd->RuO * sizeof (UINT32) + Trd->RuL * sizeof (UINT32);
//
// Start to execute the transfer request.
//
UfsStartExecCmd (Private, Slot);
//
// Wait for the completion of the transfer request.
//
Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0, 0, Packet.Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
}
if (QueryResp->QueryResp != 0) {
DumpQueryResponseResult (QueryResp->QueryResp);
Status = EFI_DEVICE_ERROR;
goto Exit;
}
if (Trd->Ocs == 0) {
*Value = (UINT8)QueryResp->Tsf.Value;
} else {
Status = EFI_DEVICE_ERROR;
}
Exit:
UfsStopExecCmd (Private, Slot);
UfsPeimFreeMem (Private->Pool, CmdDescBase, CmdDescSize);
return Status;
}
/**
Set specified flag to 1 on a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] FlagId The ID of flag to be set.
@retval EFI_SUCCESS The flag was set successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to set the flag.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of setting the flag.
**/
EFI_STATUS
UfsSetFlag (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 FlagId
)
{
EFI_STATUS Status;
UINT8 Value;
Value = 1;
Status = UfsRwFlags (Private, FALSE, FlagId, &Value);
return Status;
}
/**
Clear specified flag to 0 on a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] FlagId The ID of flag to be cleared.
@retval EFI_SUCCESS The flag was cleared successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to clear the flag.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of clearing the flag.
**/
EFI_STATUS
UfsClearFlag (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 FlagId
)
{
EFI_STATUS Status;
UINT8 Value;
Value = 0;
Status = UfsRwFlags (Private, FALSE, FlagId, &Value);
return Status;
}
/**
Read specified flag from a UFS device.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] FlagId The ID of flag to be read.
@param[out] Value The flag's value.
@retval EFI_SUCCESS The flag was read successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to read the flag.
@retval EFI_TIMEOUT A timeout occurred while waiting for the completion of reading the flag.
**/
EFI_STATUS
UfsReadFlag (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 FlagId,
OUT UINT8 *Value
)
{
EFI_STATUS Status;
Status = UfsRwFlags (Private, TRUE, FlagId, Value);
return Status;
}
/**
Sends NOP IN cmd to a UFS device for initialization process request.
For more details, please refer to UFS 2.0 spec Figure 13.3.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The NOP IN command was sent by the host. The NOP OUT response was
received successfully.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to execute NOP IN command.
@retval EFI_OUT_OF_RESOURCES The resource for transfer is not available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the NOP IN command to execute.
**/
EFI_STATUS
UfsExecNopCmds (
IN UFS_PEIM_HC_PRIVATE_DATA *Private
)
{
EFI_STATUS Status;
UINT8 Slot;
UTP_TRD *Trd;
UTP_NOP_IN_UPIU *NopInUpiu;
UINT8 *CmdDescBase;
UINT32 CmdDescSize;
UINTN Address;
//
// Find out which slot of transfer request list is available.
//
Status = UfsFindAvailableSlotInTrl (Private, &Slot);
if (EFI_ERROR (Status)) {
return Status;
}
Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
Status = UfsCreateNopCommandDesc (Private, Trd);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Check the transfer request result.
//
CmdDescBase = (UINT8 *)(UINTN)(LShiftU64 ((UINT64)Trd->UcdBaU, 32) | LShiftU64 ((UINT64)Trd->UcdBa, 7));
NopInUpiu = (UTP_NOP_IN_UPIU*)(CmdDescBase + Trd->RuO * sizeof (UINT32));
CmdDescSize = Trd->RuO * sizeof (UINT32) + Trd->RuL * sizeof (UINT32);
//
// Start to execute the transfer request.
//
UfsStartExecCmd (Private, Slot);
//
// Wait for the completion of the transfer request.
//
Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0, 0, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
goto Exit;
}
if (NopInUpiu->Resp != 0) {
Status = EFI_DEVICE_ERROR;
} else {
Status = EFI_SUCCESS;
}
Exit:
UfsStopExecCmd (Private, Slot);
UfsPeimFreeMem (Private->Pool, CmdDescBase, CmdDescSize);
return Status;
}
/**
Sends a UFS-supported SCSI Request Packet to a UFS device that is attached to the UFS host controller.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] Lun The LUN of the UFS device to send the SCSI Request Packet.
@param[in, out] Packet A pointer to the SCSI Request Packet to send to a specified Lun of the
UFS device.
@retval EFI_SUCCESS The SCSI Request Packet was sent by the host. For bi-directional
commands, InTransferLength bytes were transferred from
InDataBuffer. For write and bi-directional commands,
OutTransferLength bytes were transferred by
OutDataBuffer.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SCSI Request
Packet.
@retval EFI_OUT_OF_RESOURCES The resource for transfer is not available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute.
**/
EFI_STATUS
UfsExecScsiCmds (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 Lun,
IN OUT UFS_SCSI_REQUEST_PACKET *Packet
)
{
EFI_STATUS Status;
UINT8 Slot;
UTP_TRD *Trd;
UINTN Address;
UINT8 *CmdDescBase;
UINT32 CmdDescSize;
UTP_RESPONSE_UPIU *Response;
UINT16 SenseDataLen;
UINT32 ResTranCount;
//
// Find out which slot of transfer request list is available.
//
Status = UfsFindAvailableSlotInTrl (Private, &Slot);
if (EFI_ERROR (Status)) {
return Status;
}
Trd = ((UTP_TRD*)Private->UtpTrlBase) + Slot;
//
// Fill transfer request descriptor to this slot.
//
Status = UfsCreateScsiCommandDesc (Private, Lun, Packet, Trd);
if (EFI_ERROR (Status)) {
return Status;
}
CmdDescBase = (UINT8*)(UINTN)(LShiftU64 ((UINT64)Trd->UcdBaU, 32) | LShiftU64 ((UINT64)Trd->UcdBa, 7));
CmdDescSize = Trd->PrdtO * sizeof (UINT32) + Trd->PrdtL * sizeof (UTP_TR_PRD);
//
// Start to execute the transfer request.
//
UfsStartExecCmd (Private, Slot);
//
// Wait for the completion of the transfer request.
//
Address = Private->UfsHcBase + UFS_HC_UTRLDBR_OFFSET;
Status = UfsWaitMemSet (Address, BIT0, 0, Packet->Timeout);
if (EFI_ERROR (Status)) {
goto Exit;
}
//
// Get sense data if exists
//
Response = (UTP_RESPONSE_UPIU*)(CmdDescBase + Trd->RuO * sizeof (UINT32));
SenseDataLen = Response->SenseDataLen;
SwapLittleEndianToBigEndian ((UINT8*)&SenseDataLen, sizeof (UINT16));
if ((Packet->SenseDataLength != 0) && (Packet->SenseData != NULL)) {
CopyMem (Packet->SenseData, Response->SenseData, SenseDataLen);
Packet->SenseDataLength = (UINT8)SenseDataLen;
}
//
// Check the transfer request result.
//
if (Response->Response != 0) {
DEBUG ((EFI_D_ERROR, "UfsExecScsiCmds() fails with Target Failure\n"));
Status = EFI_DEVICE_ERROR;
goto Exit;
}
if (Trd->Ocs == 0) {
if (Packet->DataDirection == UfsDataIn) {
if ((Response->Flags & BIT5) == BIT5) {
ResTranCount = Response->ResTranCount;
SwapLittleEndianToBigEndian ((UINT8*)&ResTranCount, sizeof (UINT32));
Packet->InTransferLength -= ResTranCount;
}
} else if (Packet->DataDirection == UfsDataOut) {
if ((Response->Flags & BIT5) == BIT5) {
ResTranCount = Response->ResTranCount;
SwapLittleEndianToBigEndian ((UINT8*)&ResTranCount, sizeof (UINT32));
Packet->OutTransferLength -= ResTranCount;
}
}
} else {
Status = EFI_DEVICE_ERROR;
}
Exit:
UfsStopExecCmd (Private, Slot);
UfsPeimFreeMem (Private->Pool, CmdDescBase, CmdDescSize);
return Status;
}
/**
Sent UIC DME_LINKSTARTUP command to start the link startup procedure.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@param[in] UicOpcode The opcode of the UIC command.
@param[in] Arg1 The value for 1st argument of the UIC command.
@param[in] Arg2 The value for 2nd argument of the UIC command.
@param[in] Arg3 The value for 3rd argument of the UIC command.
@return EFI_SUCCESS Successfully execute this UIC command and detect attached UFS device.
@return EFI_DEVICE_ERROR Fail to execute this UIC command and detect attached UFS device.
@return EFI_NOT_FOUND The presence of the UFS device isn't detected.
**/
EFI_STATUS
UfsExecUicCommands (
IN UFS_PEIM_HC_PRIVATE_DATA *Private,
IN UINT8 UicOpcode,
IN UINT32 Arg1,
IN UINT32 Arg2,
IN UINT32 Arg3
)
{
EFI_STATUS Status;
UINTN Address;
UINT32 Data;
UINTN UfsHcBase;
UfsHcBase = Private->UfsHcBase;
Address = UfsHcBase + UFS_HC_IS_OFFSET;
Data = MmioRead32 (Address);
if ((Data & UFS_HC_IS_UCCS) == UFS_HC_IS_UCCS) {
//
// Clear IS.BIT10 UIC Command Completion Status (UCCS) at first.
//
MmioWrite32 (Address, Data);
}
//
// When programming UIC command registers, host software shall set the register UICCMD
// only after all the UIC command argument registers (UICCMDARG1, UICCMDARG2 and UICCMDARG3)
// are set.
//
Address = UfsHcBase + UFS_HC_UCMD_ARG1_OFFSET;
MmioWrite32 (Address, Arg1);
Address = UfsHcBase + UFS_HC_UCMD_ARG2_OFFSET;
MmioWrite32 (Address, Arg2);
Address = UfsHcBase + UFS_HC_UCMD_ARG3_OFFSET;
MmioWrite32 (Address, Arg3);
//
// Host software shall only set the UICCMD if HCS.UCRDY is set to 1.
//
Address = Private->UfsHcBase + UFS_HC_STATUS_OFFSET;
Status = UfsWaitMemSet (Address, UFS_HC_HCS_UCRDY, UFS_HC_HCS_UCRDY, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
return Status;
}
Address = UfsHcBase + UFS_HC_UIC_CMD_OFFSET;
MmioWrite32 (Address, (UINT32)UicOpcode);
//
// UFS 2.0 spec section 5.3.1 Offset:0x20 IS.Bit10 UIC Command Completion Status (UCCS)
// This bit is set to '1' by the host controller upon completion of a UIC command.
//
Address = UfsHcBase + UFS_HC_IS_OFFSET;
Data = MmioRead32 (Address);
Status = UfsWaitMemSet (Address, UFS_HC_IS_UCCS, UFS_HC_IS_UCCS, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
return Status;
}
if (UicOpcode != UfsUicDmeReset) {
Address = UfsHcBase + UFS_HC_UCMD_ARG2_OFFSET;
Data = MmioRead32 (Address);
if ((Data & 0xFF) != 0) {
DEBUG_CODE_BEGIN();
DumpUicCmdExecResult (UicOpcode, (UINT8)(Data & 0xFF));
DEBUG_CODE_END();
return EFI_DEVICE_ERROR;
}
}
//
// Check value of HCS.DP and make sure that there is a device attached to the Link.
//
Address = UfsHcBase + UFS_HC_STATUS_OFFSET;
Data = MmioRead32 (Address);
if ((Data & UFS_HC_HCS_DP) == 0) {
Address = UfsHcBase + UFS_HC_IS_OFFSET;
Status = UfsWaitMemSet (Address, UFS_HC_IS_ULSS, UFS_HC_IS_ULSS, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
return EFI_NOT_FOUND;
}
DEBUG ((EFI_D_INFO, "UfsblockioPei: found a attached UFS device\n"));
return EFI_SUCCESS;
}
/**
Enable the UFS host controller for accessing.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The UFS host controller enabling was executed successfully.
@retval EFI_DEVICE_ERROR A device error occurred while enabling the UFS host controller.
**/
EFI_STATUS
UfsEnableHostController (
IN UFS_PEIM_HC_PRIVATE_DATA *Private
)
{
EFI_STATUS Status;
UINTN Address;
UINT32 Data;
//
// UFS 2.0 spec section 7.1.1 - Host Controller Initialization
//
// Reinitialize the UFS host controller if HCE bit of HC register is set.
//
Address = Private->UfsHcBase + UFS_HC_ENABLE_OFFSET;
Data = MmioRead32 (Address);
if ((Data & UFS_HC_HCE_EN) == UFS_HC_HCE_EN) {
//
// Write a 0 to the HCE register at first to disable the host controller.
//
MmioWrite32 (Address, 0);
//
// Wait until HCE is read as '0' before continuing.
//
Status = UfsWaitMemSet (Address, UFS_HC_HCE_EN, 0, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
}
//
// Write a 1 to the HCE register to enable the UFS host controller.
//
MmioWrite32 (Address, UFS_HC_HCE_EN);
//
// Wait until HCE is read as '1' before continuing.
//
Status = UfsWaitMemSet (Address, UFS_HC_HCE_EN, UFS_HC_HCE_EN, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
return EFI_SUCCESS;
}
/**
Detect if a UFS device attached.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The UFS device detection was executed successfully.
@retval EFI_NOT_FOUND Not found a UFS device attached.
@retval EFI_DEVICE_ERROR A device error occurred while detecting the UFS device.
**/
EFI_STATUS
UfsDeviceDetection (
IN UFS_PEIM_HC_PRIVATE_DATA *Private
)
{
UINTN Retry;
EFI_STATUS Status;
//
// Start UFS device detection.
// Try up to 3 times for establishing data link with device.
//
for (Retry = 0; Retry < 3; Retry++) {
Status = UfsExecUicCommands (Private, UfsUicDmeLinkStartup, 0, 0, 0);
if (!EFI_ERROR (Status)) {
break;
}
if (Status == EFI_NOT_FOUND) {
continue;
}
return EFI_DEVICE_ERROR;
}
if (Retry == 3) {
return EFI_NOT_FOUND;
}
return EFI_SUCCESS;
}
/**
Initialize UFS task management request list related h/w context.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The UFS task management list was initialzed successfully.
@retval EFI_DEVICE_ERROR The initialization fails.
**/
EFI_STATUS
UfsInitTaskManagementRequestList (
IN UFS_PEIM_HC_PRIVATE_DATA *Private
)
{
UINTN Address;
UINT32 Data;
UINT8 Nutmrs;
EFI_PHYSICAL_ADDRESS Buffer;
EFI_STATUS Status;
//
// Initial h/w and s/w context for future operations.
//
Address = Private->UfsHcBase + UFS_HC_CAP_OFFSET;
Data = MmioRead32 (Address);
Private->Capabilities = Data;
//
// Allocate and initialize UTP Task Management Request List.
//
Nutmrs = (UINT8) (RShiftU64 ((Private->Capabilities & UFS_HC_CAP_NUTMRS), 16) + 1);
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
EFI_SIZE_TO_PAGES (Nutmrs * sizeof (UTP_TMRD)),
&Buffer
);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
ZeroMem ((VOID*)(UINTN)Buffer, EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (Nutmrs * sizeof (UTP_TMRD))));
//
// Program the UTP Task Management Request List Base Address and UTP Task Management
// Request List Base Address with a 64-bit address allocated at step 6.
//
Address = Private->UfsHcBase + UFS_HC_UTMRLBA_OFFSET;
MmioWrite32 (Address, (UINT32)(UINTN)Buffer);
Address = Private->UfsHcBase + UFS_HC_UTMRLBAU_OFFSET;
MmioWrite32 (Address, (UINT32)RShiftU64 ((UINT64)Buffer, 32));
Private->UtpTmrlBase = (VOID*)(UINTN)Buffer;
Private->Nutmrs = Nutmrs;
//
// Enable the UTP Task Management Request List by setting the UTP Task Management
// Request List RunStop Register (UTMRLRSR) to '1'.
//
Address = Private->UfsHcBase + UFS_HC_UTMRLRSR_OFFSET;
MmioWrite32 (Address, UFS_HC_UTMRLRSR);
return EFI_SUCCESS;
}
/**
Initialize UFS transfer request list related h/w context.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The UFS transfer list was initialzed successfully.
@retval EFI_DEVICE_ERROR The initialization fails.
**/
EFI_STATUS
UfsInitTransferRequestList (
IN UFS_PEIM_HC_PRIVATE_DATA *Private
)
{
UINTN Address;
UINT32 Data;
UINT8 Nutrs;
EFI_PHYSICAL_ADDRESS Buffer;
EFI_STATUS Status;
//
// Initial h/w and s/w context for future operations.
//
Address = Private->UfsHcBase + UFS_HC_CAP_OFFSET;
Data = MmioRead32 (Address);
Private->Capabilities = Data;
//
// Allocate and initialize UTP Transfer Request List.
//
Nutrs = (UINT8)((Private->Capabilities & UFS_HC_CAP_NUTRS) + 1);
Status = PeiServicesAllocatePages (
EfiBootServicesCode,
EFI_SIZE_TO_PAGES (Nutrs * sizeof (UTP_TRD)),
&Buffer
);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
ZeroMem ((VOID*)(UINTN)Buffer, EFI_PAGES_TO_SIZE (EFI_SIZE_TO_PAGES (Nutrs * sizeof (UTP_TRD))));
//
// Program the UTP Transfer Request List Base Address and UTP Transfer Request List
// Base Address with a 64-bit address allocated at step 8.
//
Address = Private->UfsHcBase + UFS_HC_UTRLBA_OFFSET;
MmioWrite32 (Address, (UINT32)(UINTN)Buffer);
Address = Private->UfsHcBase + UFS_HC_UTRLBAU_OFFSET;
MmioWrite32 (Address, (UINT32)RShiftU64 ((UINT64)Buffer, 32));
Private->UtpTrlBase = (VOID*)(UINTN)Buffer;
Private->Nutrs = Nutrs;
//
// Enable the UTP Transfer Request List by setting the UTP Transfer Request List
// RunStop Register (UTRLRSR) to '1'.
//
Address = Private->UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
MmioWrite32 (Address, UFS_HC_UTRLRSR);
return EFI_SUCCESS;
}
/**
Initialize the UFS host controller.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The Ufs Host Controller is initialized successfully.
@retval Others A device error occurred while initializing the controller.
**/
EFI_STATUS
UfsControllerInit (
IN UFS_PEIM_HC_PRIVATE_DATA *Private
)
{
EFI_STATUS Status;
Status = UfsEnableHostController (Private);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UfsDevicePei: Enable Host Controller Fails, Status = %r\n", Status));
return Status;
}
Status = UfsDeviceDetection (Private);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UfsDevicePei: Device Detection Fails, Status = %r\n", Status));
return Status;
}
Status = UfsInitTaskManagementRequestList (Private);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UfsDevicePei: Task management list initialization Fails, Status = %r\n", Status));
return Status;
}
Status = UfsInitTransferRequestList (Private);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "UfsDevicePei: Transfer list initialization Fails, Status = %r\n", Status));
return Status;
}
DEBUG ((EFI_D_INFO, "UfsDevicePei Finished\n"));
return EFI_SUCCESS;
}
/**
Stop the UFS host controller.
@param[in] Private The pointer to the UFS_PEIM_HC_PRIVATE_DATA data structure.
@retval EFI_SUCCESS The Ufs Host Controller is stopped successfully.
@retval Others A device error occurred while stopping the controller.
**/
EFI_STATUS
UfsControllerStop (
IN UFS_PEIM_HC_PRIVATE_DATA *Private
)
{
EFI_STATUS Status;
UINTN Address;
UINT32 Data;
//
// Enable the UTP Task Management Request List by setting the UTP Task Management
// Request List RunStop Register (UTMRLRSR) to '1'.
//
Address = Private->UfsHcBase + UFS_HC_UTMRLRSR_OFFSET;
MmioWrite32 (Address, 0);
//
// Enable the UTP Transfer Request List by setting the UTP Transfer Request List
// RunStop Register (UTRLRSR) to '1'.
//
Address = Private->UfsHcBase + UFS_HC_UTRLRSR_OFFSET;
MmioWrite32 (Address, 0);
//
// Write a 0 to the HCE register in order to disable the host controller.
//
Address = Private->UfsHcBase + UFS_HC_ENABLE_OFFSET;
Data = MmioRead32 (Address);
ASSERT ((Data & UFS_HC_HCE_EN) == UFS_HC_HCE_EN);
MmioWrite32 (Address, 0);
//
// Wait until HCE is read as '0' before continuing.
//
Status = UfsWaitMemSet (Address, UFS_HC_HCE_EN, 0, UFS_TIMEOUT);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
DEBUG ((EFI_D_INFO, "UfsDevicePei: Stop the UFS Host Controller\n"));
return EFI_SUCCESS;
}
Reference in New Issue View Git Blame Copy Permalink