Files
system76-edk2/ArmPkg/Drivers/ArmGic/ArmGicLib.c
Sami Mujawar a44fef7de3 ArmPkg: Fix data type used for GicInterruptInterfaceBase
The data type used by variables representing the
GicInterruptInterfaceBase has been inconsistently used in the ArmGic
driver and the library.  The PCD defined for the GIC Interrupt interface
base address is UINT64. However, the data types for the variables used
is UINTN, INTN, and at some places UINT32.

Therefore, update the data types to use UINTN and add necessary
typecasts when reading values from the PCD. This should then be
consistent across AArch32 and AArch64 builds.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
2023-06-01 15:52:01 +00:00

442 lines
12 KiB
C

/** @file
*
* Copyright (c) 2011-2023, Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-2-Clause-Patent
*
**/
#include <Base.h>
#include <Library/ArmGicLib.h>
#include <Library/ArmLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
#include <Library/PcdLib.h>
// In GICv3, there are 2 x 64KB frames:
// Redistributor control frame + SGI Control & Generation frame
#define GIC_V3_REDISTRIBUTOR_GRANULARITY (ARM_GICR_CTLR_FRAME_SIZE \
+ ARM_GICR_SGI_PPI_FRAME_SIZE)
// In GICv4, there are 2 additional 64KB frames:
// VLPI frame + Reserved page frame
#define GIC_V4_REDISTRIBUTOR_GRANULARITY (GIC_V3_REDISTRIBUTOR_GRANULARITY \
+ ARM_GICR_SGI_VLPI_FRAME_SIZE \
+ ARM_GICR_SGI_RESERVED_FRAME_SIZE)
#define ISENABLER_ADDRESS(base, offset) ((base) +\
ARM_GICR_CTLR_FRAME_SIZE + ARM_GICR_ISENABLER + 4 * (offset))
#define ICENABLER_ADDRESS(base, offset) ((base) +\
ARM_GICR_CTLR_FRAME_SIZE + ARM_GICR_ICENABLER + 4 * (offset))
#define IPRIORITY_ADDRESS(base, offset) ((base) +\
ARM_GICR_CTLR_FRAME_SIZE + ARM_GIC_ICDIPR + 4 * (offset))
/**
*
* Return whether the Source interrupt index refers to a shared interrupt (SPI)
*/
STATIC
BOOLEAN
SourceIsSpi (
IN UINTN Source
)
{
return Source >= 32 && Source < 1020;
}
/**
* Return the base address of the GIC redistributor for the current CPU
*
* @param Revision GIC Revision. The GIC redistributor might have a different
* granularity following the GIC revision.
*
* @retval Base address of the associated GIC Redistributor
*/
STATIC
UINTN
GicGetCpuRedistributorBase (
IN UINTN GicRedistributorBase,
IN ARM_GIC_ARCH_REVISION Revision
)
{
UINTN MpId;
UINTN CpuAffinity;
UINTN Affinity;
UINTN GicCpuRedistributorBase;
UINT64 TypeRegister;
MpId = ArmReadMpidr ();
// Define CPU affinity as:
// Affinity0[0:8], Affinity1[9:15], Affinity2[16:23], Affinity3[24:32]
// whereas Affinity3 is defined at [32:39] in MPIDR
CpuAffinity = (MpId & (ARM_CORE_AFF0 | ARM_CORE_AFF1 | ARM_CORE_AFF2)) |
((MpId & ARM_CORE_AFF3) >> 8);
if (Revision < ARM_GIC_ARCH_REVISION_3) {
ASSERT_EFI_ERROR (EFI_UNSUPPORTED);
return 0;
}
GicCpuRedistributorBase = GicRedistributorBase;
do {
TypeRegister = MmioRead64 (GicCpuRedistributorBase + ARM_GICR_TYPER);
Affinity = ARM_GICR_TYPER_GET_AFFINITY (TypeRegister);
if (Affinity == CpuAffinity) {
return GicCpuRedistributorBase;
}
// Move to the next GIC Redistributor frame.
// The GIC specification does not forbid a mixture of redistributors
// with or without support for virtual LPIs, so we test Virtual LPIs
// Support (VLPIS) bit for each frame to decide the granularity.
// Note: The assumption here is that the redistributors are adjacent
// for all CPUs. However this may not be the case for NUMA systems.
GicCpuRedistributorBase += (((ARM_GICR_TYPER_VLPIS & TypeRegister) != 0)
? GIC_V4_REDISTRIBUTOR_GRANULARITY
: GIC_V3_REDISTRIBUTOR_GRANULARITY);
} while ((TypeRegister & ARM_GICR_TYPER_LAST) == 0);
// The Redistributor has not been found for the current CPU
ASSERT_EFI_ERROR (EFI_NOT_FOUND);
return 0;
}
/**
Return the GIC CPU Interrupt Interface ID.
@param GicInterruptInterfaceBase Base address of the GIC Interrupt Interface.
@retval CPU Interface Identification information.
**/
UINTN
EFIAPI
ArmGicGetInterfaceIdentification (
IN UINTN GicInterruptInterfaceBase
)
{
// Read the GIC Identification Register
return MmioRead32 (GicInterruptInterfaceBase + ARM_GIC_ICCIIDR);
}
UINTN
EFIAPI
ArmGicGetMaxNumInterrupts (
IN UINTN GicDistributorBase
)
{
UINTN ItLines;
ItLines = MmioRead32 (GicDistributorBase + ARM_GIC_ICDICTR) & 0x1F;
//
// Interrupt ID 1020-1023 are reserved.
//
return (ItLines == 0x1f) ? 1020 : 32 * (ItLines + 1);
}
VOID
EFIAPI
ArmGicSendSgiTo (
IN UINTN GicDistributorBase,
IN INTN TargetListFilter,
IN INTN CPUTargetList,
IN INTN SgiId
)
{
MmioWrite32 (
GicDistributorBase + ARM_GIC_ICDSGIR,
((TargetListFilter & 0x3) << 24) | ((CPUTargetList & 0xFF) << 16) | SgiId
);
}
/*
* Acknowledge and return the value of the Interrupt Acknowledge Register
*
* InterruptId is returned separately from the register value because in
* the GICv2 the register value contains the CpuId and InterruptId while
* in the GICv3 the register value is only the InterruptId.
*
* @param GicInterruptInterfaceBase Base Address of the GIC CPU Interface
* @param InterruptId InterruptId read from the Interrupt
* Acknowledge Register
*
* @retval value returned by the Interrupt Acknowledge Register
*
*/
UINTN
EFIAPI
ArmGicAcknowledgeInterrupt (
IN UINTN GicInterruptInterfaceBase,
OUT UINTN *InterruptId
)
{
UINTN Value;
ARM_GIC_ARCH_REVISION Revision;
Revision = ArmGicGetSupportedArchRevision ();
if (Revision == ARM_GIC_ARCH_REVISION_2) {
Value = ArmGicV2AcknowledgeInterrupt (GicInterruptInterfaceBase);
// InterruptId is required for the caller to know if a valid or spurious
// interrupt has been read
ASSERT (InterruptId != NULL);
if (InterruptId != NULL) {
*InterruptId = Value & ARM_GIC_ICCIAR_ACKINTID;
}
} else if (Revision == ARM_GIC_ARCH_REVISION_3) {
Value = ArmGicV3AcknowledgeInterrupt ();
} else {
ASSERT_EFI_ERROR (EFI_UNSUPPORTED);
// Report Spurious interrupt which is what the above controllers would
// return if no interrupt was available
Value = 1023;
}
return Value;
}
VOID
EFIAPI
ArmGicEndOfInterrupt (
IN UINTN GicInterruptInterfaceBase,
IN UINTN Source
)
{
ARM_GIC_ARCH_REVISION Revision;
Revision = ArmGicGetSupportedArchRevision ();
if (Revision == ARM_GIC_ARCH_REVISION_2) {
ArmGicV2EndOfInterrupt (GicInterruptInterfaceBase, Source);
} else if (Revision == ARM_GIC_ARCH_REVISION_3) {
ArmGicV3EndOfInterrupt (Source);
} else {
ASSERT_EFI_ERROR (EFI_UNSUPPORTED);
}
}
VOID
EFIAPI
ArmGicSetInterruptPriority (
IN UINTN GicDistributorBase,
IN UINTN GicRedistributorBase,
IN UINTN Source,
IN UINTN Priority
)
{
UINT32 RegOffset;
UINTN RegShift;
ARM_GIC_ARCH_REVISION Revision;
UINTN GicCpuRedistributorBase;
// Calculate register offset and bit position
RegOffset = Source / 4;
RegShift = (Source % 4) * 8;
Revision = ArmGicGetSupportedArchRevision ();
if ((Revision == ARM_GIC_ARCH_REVISION_2) ||
FeaturePcdGet (PcdArmGicV3WithV2Legacy) ||
SourceIsSpi (Source))
{
MmioAndThenOr32 (
GicDistributorBase + ARM_GIC_ICDIPR + (4 * RegOffset),
~(0xff << RegShift),
Priority << RegShift
);
} else {
GicCpuRedistributorBase = GicGetCpuRedistributorBase (
GicRedistributorBase,
Revision
);
if (GicCpuRedistributorBase == 0) {
return;
}
MmioAndThenOr32 (
IPRIORITY_ADDRESS (GicCpuRedistributorBase, RegOffset),
~(0xff << RegShift),
Priority << RegShift
);
}
}
VOID
EFIAPI
ArmGicEnableInterrupt (
IN UINTN GicDistributorBase,
IN UINTN GicRedistributorBase,
IN UINTN Source
)
{
UINT32 RegOffset;
UINTN RegShift;
ARM_GIC_ARCH_REVISION Revision;
UINTN GicCpuRedistributorBase;
// Calculate enable register offset and bit position
RegOffset = Source / 32;
RegShift = Source % 32;
Revision = ArmGicGetSupportedArchRevision ();
if ((Revision == ARM_GIC_ARCH_REVISION_2) ||
FeaturePcdGet (PcdArmGicV3WithV2Legacy) ||
SourceIsSpi (Source))
{
// Write set-enable register
MmioWrite32 (
GicDistributorBase + ARM_GIC_ICDISER + (4 * RegOffset),
1 << RegShift
);
} else {
GicCpuRedistributorBase = GicGetCpuRedistributorBase (
GicRedistributorBase,
Revision
);
if (GicCpuRedistributorBase == 0) {
ASSERT_EFI_ERROR (EFI_NOT_FOUND);
return;
}
// Write set-enable register
MmioWrite32 (
ISENABLER_ADDRESS (GicCpuRedistributorBase, RegOffset),
1 << RegShift
);
}
}
VOID
EFIAPI
ArmGicDisableInterrupt (
IN UINTN GicDistributorBase,
IN UINTN GicRedistributorBase,
IN UINTN Source
)
{
UINT32 RegOffset;
UINTN RegShift;
ARM_GIC_ARCH_REVISION Revision;
UINTN GicCpuRedistributorBase;
// Calculate enable register offset and bit position
RegOffset = Source / 32;
RegShift = Source % 32;
Revision = ArmGicGetSupportedArchRevision ();
if ((Revision == ARM_GIC_ARCH_REVISION_2) ||
FeaturePcdGet (PcdArmGicV3WithV2Legacy) ||
SourceIsSpi (Source))
{
// Write clear-enable register
MmioWrite32 (
GicDistributorBase + ARM_GIC_ICDICER + (4 * RegOffset),
1 << RegShift
);
} else {
GicCpuRedistributorBase = GicGetCpuRedistributorBase (
GicRedistributorBase,
Revision
);
if (GicCpuRedistributorBase == 0) {
return;
}
// Write clear-enable register
MmioWrite32 (
ICENABLER_ADDRESS (GicCpuRedistributorBase, RegOffset),
1 << RegShift
);
}
}
BOOLEAN
EFIAPI
ArmGicIsInterruptEnabled (
IN UINTN GicDistributorBase,
IN UINTN GicRedistributorBase,
IN UINTN Source
)
{
UINT32 RegOffset;
UINTN RegShift;
ARM_GIC_ARCH_REVISION Revision;
UINTN GicCpuRedistributorBase;
UINT32 Interrupts;
// Calculate enable register offset and bit position
RegOffset = Source / 32;
RegShift = Source % 32;
Revision = ArmGicGetSupportedArchRevision ();
if ((Revision == ARM_GIC_ARCH_REVISION_2) ||
FeaturePcdGet (PcdArmGicV3WithV2Legacy) ||
SourceIsSpi (Source))
{
Interrupts = MmioRead32 (
GicDistributorBase + ARM_GIC_ICDISER + (4 * RegOffset)
);
} else {
GicCpuRedistributorBase = GicGetCpuRedistributorBase (
GicRedistributorBase,
Revision
);
if (GicCpuRedistributorBase == 0) {
return 0;
}
// Read set-enable register
Interrupts = MmioRead32 (
ISENABLER_ADDRESS (GicCpuRedistributorBase, RegOffset)
);
}
return ((Interrupts & (1 << RegShift)) != 0);
}
VOID
EFIAPI
ArmGicDisableDistributor (
IN UINTN GicDistributorBase
)
{
// Disable Gic Distributor
MmioWrite32 (GicDistributorBase + ARM_GIC_ICDDCR, 0x0);
}
VOID
EFIAPI
ArmGicEnableInterruptInterface (
IN UINTN GicInterruptInterfaceBase
)
{
ARM_GIC_ARCH_REVISION Revision;
Revision = ArmGicGetSupportedArchRevision ();
if (Revision == ARM_GIC_ARCH_REVISION_2) {
ArmGicV2EnableInterruptInterface (GicInterruptInterfaceBase);
} else if (Revision == ARM_GIC_ARCH_REVISION_3) {
ArmGicV3EnableInterruptInterface ();
} else {
ASSERT_EFI_ERROR (EFI_UNSUPPORTED);
}
}
VOID
EFIAPI
ArmGicDisableInterruptInterface (
IN UINTN GicInterruptInterfaceBase
)
{
ARM_GIC_ARCH_REVISION Revision;
Revision = ArmGicGetSupportedArchRevision ();
if (Revision == ARM_GIC_ARCH_REVISION_2) {
ArmGicV2DisableInterruptInterface (GicInterruptInterfaceBase);
} else if (Revision == ARM_GIC_ARCH_REVISION_3) {
ArmGicV3DisableInterruptInterface ();
} else {
ASSERT_EFI_ERROR (EFI_UNSUPPORTED);
}
}