f806dd277e
Remove patchable type Flash related PCD. Simplify single one PcdPeiFullPcdDatabaseEnable to produce full or minimal Pei PCD services. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@7678 6f19259b-4bc3-4df7-8a09-765794883524
464 lines
22 KiB
Plaintext
464 lines
22 KiB
Plaintext
## @file MdeModulePkg.dec
|
|
#
|
|
# This package provides the modules that conform to EFI/PI Industry standards.
|
|
# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
|
|
# and libraries instances, which are used for those modules.
|
|
#
|
|
# Copyright (c) 2007 - 2008, Intel Corporation.
|
|
#
|
|
# All rights reserved.
|
|
# This program and the accompanying materials are licensed and made available under
|
|
# the terms and conditions of the BSD License which accompanies this distribution.
|
|
# The full text of the license may be found at
|
|
# http://opensource.org/licenses/bsd-license.php
|
|
#
|
|
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
#
|
|
##
|
|
|
|
|
|
[Defines]
|
|
DEC_SPECIFICATION = 0x00010005
|
|
PACKAGE_NAME = MdeModulePkg
|
|
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
|
|
PACKAGE_VERSION = 0.1
|
|
|
|
[Includes.common]
|
|
Include
|
|
|
|
|
|
[LibraryClasses.common]
|
|
## @libraryclass IpIo layer upon EFI IP4 Protocol.
|
|
IpIoLib|Include/Library/IpIoLib.h
|
|
|
|
## @libraryclass Basic function for UEFI network stack.
|
|
NetLib|Include/Library/NetLib.h
|
|
|
|
## @libraryclass Defines a set of methods to reset whole system.
|
|
ResetSystemLib|Include/Library/ResetSystemLib.h
|
|
|
|
## @libraryclass The helper routines to access UDP service.
|
|
UdpIoLib|Include/Library/UdpIoLib.h
|
|
|
|
## @libraryclass Defines a set of methods related do S3 mode.
|
|
S3Lib|Include/Library/S3Lib.h
|
|
|
|
## @libraryclass Defines a set of methods related recovery mode.
|
|
RecoveryLib|Include/Library/RecoveryLib.h
|
|
|
|
## @libraryclass Basic platform driver override functions.
|
|
PlatformDriverOverrideLib|Include/Library/PlatformDriverOverrideLib.h
|
|
|
|
## @libraryclass Provides HII related functions.
|
|
HiiLib|Include/Library/HiiLib.h
|
|
|
|
## @libraryclass Provides a set of interfaces to do IFR opcode creation and interact with a UEFI Form Browser.
|
|
IfrSupportLib|Include/Library/IfrSupportLib.h
|
|
|
|
## @libraryclass Includes two extended HII functions to create and destory Hii Package
|
|
# by create the virtual Driver Handle.
|
|
##
|
|
ExtendedHiiLib|Include/Library/ExtendedHiiLib.h
|
|
|
|
## @libraryclass Defines APIs that is related to IFR operations but specific to EDK II
|
|
# implementation.
|
|
##
|
|
ExtendedIfrSupportLib|Include/Library/ExtendedIfrSupportLib.h
|
|
|
|
## @libraryclass Defines a set of interfaces on how to process capusle image update.
|
|
CapsuleLib|Include/Library/CapsuleLib.h
|
|
|
|
## @libraryclass Library for Deferred Procedure Calls.
|
|
DpcLib|Include/Library/DpcLib.h
|
|
|
|
## @libraryclass Provides all FVB runtime services defined in PI specification FVB protocol to provide
|
|
# low level control interfaces over block-oriented firmware devices.
|
|
##
|
|
FvbServiceLib|Include/Library/FvbServiceLib.h
|
|
|
|
## @libraryclass Provides APIs for system memory test.
|
|
##
|
|
MemoryTestLib|Include/Library/BaseMemoryTestLib.h
|
|
|
|
[Guids.common]
|
|
## MdeModule package token space guid
|
|
## Include/Guid/MdeModulePkgTokenSpace.h
|
|
gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
|
|
|
|
## Hob guid for Pcd DataBase
|
|
## Include/Guid/PcdDataBaseHobGuid.h
|
|
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
|
|
|
|
## Guid for EDKII implementation GUIDed opcodes
|
|
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
|
|
|
|
## Guid for Framework vfr GUIDed opcodes.
|
|
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
|
|
|
|
## Guid to specify the System Non Volatile FV
|
|
## Include/Guid/SystemNvDataGuid.h
|
|
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
|
|
|
|
## Alternate Firmware Volume Block Guid specify that the additional
|
|
# FVB protocol is installed into FVB handle
|
|
## Include/Guid/AlternateFvBlock.h
|
|
gEfiAlternateFvBlockGuid = { 0xF496922D, 0x172F, 0x4BBC, { 0xA1, 0xEB, 0x0E, 0xEB, 0x94, 0x9C, 0x34, 0x86 }}
|
|
|
|
## Guid specify the device is the console out device.
|
|
## Include/Guid/ConsoleOutDevice.h
|
|
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|
|
|
## Guid specify the device is the console in device.
|
|
## Include/Guid/ConsoleInDevice.h
|
|
gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|
|
|
## Guid specify the primary console out device.
|
|
## Include/Guid/PrimaryConsoleOutDevice.h
|
|
gEfiPrimaryConsoleOutDeviceGuid = { 0x62BDF38A, 0xE3D5, 0x492C, { 0x95, 0x0C, 0x23, 0xA7, 0xF6, 0x6E, 0x67, 0x2E }}
|
|
|
|
## Guid specify the primary console in device.
|
|
## Include/Guid/PrimaryConsoleInDevice.h
|
|
gEfiPrimaryConsoleInDeviceGuid = { 0xE451DCBE, 0x96A1, 0x4729, { 0xA5, 0xCF, 0x6B, 0x9C, 0x2C, 0xFF, 0x47, 0xFD }}
|
|
|
|
## Guid specify the primary StdErr device.
|
|
## Include/Guid/PrimaryStandardErrorDevice.h
|
|
gEfiPrimaryStandardErrorDeviceGuid = { 0x5A68191B, 0x9B97, 0x4752, { 0x99, 0x46, 0xE3, 0x6A, 0x5D, 0xA9, 0x42, 0xB1 }}
|
|
|
|
## Guid specify the default BMP logo file.
|
|
## Include/Guid/Bmp.h
|
|
gEfiDefaultBmpLogoGuid = { 0x7BB28B99, 0x61BB, 0x11D5, { 0x9A, 0x5D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|
|
|
## Variale guid specify boot state.
|
|
## Include/Guid/BootState.h
|
|
gEfiBootStateGuid = { 0x60B5E939, 0x0FCF, 0x4227, { 0xBA, 0x83, 0x6B, 0xBE, 0xD4, 0x5B, 0xC0, 0xE3 }}
|
|
|
|
## Hob and Variable guid specify the platform memory type information.
|
|
## Include/Guid/MemoryTypeInformation.h
|
|
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
|
|
|
|
## Capsule update hob and variable guid
|
|
## Include/Guid/CapsuleVendor.h
|
|
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
|
|
|
|
## Guid specify the Shell application.
|
|
## Include/Guid/ShellFile.h
|
|
gEfiShellFileGuid = { 0xC57AD6B7, 0x0515, 0x40A8, { 0x9D, 0x21, 0x55, 0x16, 0x52, 0x85, 0x4E, 0x37 }}
|
|
|
|
## Guid specifiy the device is the StdErr device.
|
|
## Include/Guid/StandardErrorDevice.h
|
|
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|
|
|
## PeCoffLoader guid for PeCoffLoader entry in the HOB list.
|
|
## Include/Guid/PeiPeCoffLoader.h
|
|
gEfiPeiPeCoffLoaderGuid = { 0xD8117CFF, 0x94A6, 0x11D4, { 0x9A, 0x3A, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
|
|
|
|
## Guid specify the variable list entries put in the EFI system table.
|
|
## Include/Guid/VariableInfo.h
|
|
gEfiVariableInfoGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
|
|
|
|
## Platform Override Variable guid
|
|
## Include/Guid/OverrideVariable.h
|
|
gEfiOverrideVariableGuid = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }}
|
|
|
|
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
|
|
## Include/Guid/Performance.h
|
|
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}
|
|
|
|
## Guid is defined for CRC32 encapsulation scheme.
|
|
## Include/Guid/Crc32GuidedSectionExtraction.h
|
|
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
|
|
|
|
[Protocols.common]
|
|
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
|
|
## Include/Protocol/LoadPe32Image.h
|
|
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
|
|
|
|
## Print protocol defines six basic print functions to print the format unicode and ascii string.
|
|
## Include/Protocol/Print2.h
|
|
gEfiPrint2ProtocolGuid = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}
|
|
|
|
## This protocol defines the generic memory test interfaces in Dxe phase.
|
|
## Include/Protocol/GenericMemoryTest.h
|
|
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
|
|
|
|
## Fault tolerant write lite protocol defines only one interface to write
|
|
# the buffer to the fault tolerant storage.
|
|
## Include/Protocol/FaultTolerantWriteLite.h
|
|
gEfiFaultTolerantWriteLiteProtocolGuid = { 0x3F557189, 0x8DAE, 0x45AE, { 0xA0, 0xB3, 0x2B, 0x99, 0xCA, 0x7A, 0xA7, 0xA0 }}
|
|
|
|
## This protocol provides the interfaces to Get/Set the current video mode for GOP/UGA screen
|
|
## Include/Protocol/ConsoleControl.h
|
|
gEfiConsoleControlProtocolGuid = { 0xF42F7782, 0x012E, 0x4C12, { 0x99, 0x56, 0x49, 0xF9, 0x43, 0x04, 0xF7, 0x21 }}
|
|
|
|
## OEM Badging Protocol defines the interface to get the OEM badging image with the dispaly attribute.
|
|
## Include/Protocol/OEMBadging.h
|
|
gEfiOEMBadgingProtocolGuid = { 0x170E13C0, 0xBF1B, 0x4218, { 0x87, 0x1D, 0x2A, 0xBD, 0xC6, 0xF8, 0x87, 0xBC }}
|
|
|
|
## Include/Protocol/NicIp4Config.h
|
|
gEfiNicIp4ConfigProtocolGuid = {0xdca3d4d, 0x12da, 0x4728, { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 }}
|
|
|
|
## Include/Protocol/NicIp4Config.h
|
|
gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
|
|
|
|
## Include/Protocol/Tcp.h
|
|
gEfiTcpProtocolGuid = {0x02b3d5f2, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d }}
|
|
|
|
## Include/Protocol/PxeDhcp4CallBack.h
|
|
gEfiPxeDhcp4CallbackProtocolGuid = {0xc1544c01, 0x92a4, 0x4198, {0x8a, 0x84, 0x77, 0x85, 0x83, 0xc2, 0x36, 0x21 }}
|
|
|
|
## Include/Protocol/PxeDhcp4.h
|
|
gEfiPxeDhcp4ProtocolGuid = {0x03c4e624, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x29, 0x3f, 0xc1, 0x4d }}
|
|
|
|
## Include/Protocol/Dpc.h
|
|
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
|
|
|
|
## Tcg addtional services to measure PeImage and ActionString.
|
|
## Include/Protocol/TcgPlatform.h
|
|
gEfiTcgPlatformProtocolGuid = { 0x8c4c9a41, 0xbf56, 0x4627, { 0x9e, 0xa, 0xc8, 0x38, 0x6d, 0x66, 0x11, 0x5c }}
|
|
|
|
[PcdsFeatureFlag.common]
|
|
## Indicate whether platform can support update capsule across a system reset
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
|
|
|
|
## This feature flag can be used to enable or disable all PCD PEIM services.
|
|
# If TRUE, all PCD PEIM services will be provided.
|
|
## If FALSE, the minimal PCD PEIM services (only GetService) will be provided.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
|
|
|
|
## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
|
|
# It can be disabled to save size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
|
|
|
|
## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
|
|
# It can be disabled to save size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
|
|
|
|
## If this PCD is set as TRUE, the code specific to NT emulator will be enabled.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdNtEmulatorEnable|FALSE|BOOLEAN|0x0001003e
|
|
|
|
## If TRUE, track statistical information about variable usage stored in the EFI system table.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
|
|
|
|
## If TRUE, Unicode Collation Protocol will be installed.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
|
|
|
|
## If TRUE, Unicode Collation 2 Protocol will be installed.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
|
|
|
|
## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
|
|
# It could be set FALSE to save size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
|
|
|
|
## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
|
|
# It could be set FALSE to save size.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
|
|
|
|
## If TRUE, TE image will first be searched in PeiCore dispatcher.
|
|
# If FALSE, PE image will first be searched.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
|
|
|
|
## If PcdSupportHardwareErrorRecord is TRUE, support hardware error record via variable in BDS.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHardwareErrorRecord|FALSE|BOOLEAN|0x00010045
|
|
|
|
## If TRUE, Robustnesss improvement such as for DUET. Default is not required.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
|
|
|
|
## If TRUE, HiiImageProtocol will be installed.
|
|
# FALSE is for size reduction.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
|
|
|
|
## If TRUE, Full UEFI Config Routing Protocol will be installed.
|
|
# FALSE is for size reduction.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportFullConfigRoutingProtocol|TRUE|BOOLEAN|0x00010101
|
|
|
|
## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
|
|
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved
|
|
# from HII database.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
|
|
|
|
## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
|
|
# If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
|
|
## This is used to provide backward compatibility support to Framework HII and Framework FvHob.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
|
|
|
|
##
|
|
# If TRUE, HelloWorld Application will print the verbose information.
|
|
# This PCD is a sample to explain FeatureFlag PCD usage.
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
|
|
|
|
[PcdsFixedAtBuild.common]
|
|
## Dynamic type PCD can be registered callback function for Pcd setting action.
|
|
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
|
|
# for a dynamic PCD used in PEI phase.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
|
|
|
|
## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
|
|
# to store PCD value.
|
|
#
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
|
|
|
|
## Indicate the max size of the populated image that the platform can support.
|
|
# To support the multi populated images, the defautl supported size will
|
|
# be enlarged to 100MB that is 10 times of the single non-populated image.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
|
|
|
|
## Indicate the max size of the non-populated image that the platform can support.
|
|
# The default size is 10MB for the casule image without populated flag setting.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
|
|
|
|
## Maximun number of performance log entries during PEI phase.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
|
|
|
|
## Maximum number of FV is supported by PeiCore's dispatching.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
|
|
|
|
## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
|
|
|
|
## Maximum stack size for PeiCore.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
|
|
|
|
## Maximum PPI count is supported by PeiCore's PPI database.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
|
|
|
|
## RTC Update Timeout Value
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
|
|
|
|
## Base address of the NV variable range in flash device.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
|
|
|
|
## Size of the NV variable range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
|
|
|
|
## Maximum buffer for the single variable.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
|
|
|
|
## Maximum buffer for Hardware error record variable.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
|
|
|
|
## Maximum buffer for the total variable store.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
|
|
|
|
## Base address of the FTW spare block range in flash device.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
|
|
|
|
## Size of the FTW spare block range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
|
|
|
|
## Base address of the FTW working block range in flash device.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
|
|
|
|
## Size of the FTW working block range.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
|
|
|
|
## Default timeout value for displaying progressing bar in before boot OS.
|
|
# This value can be changed in BDS.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001
|
|
|
|
## Error level for hardware recorder.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002
|
|
|
|
##
|
|
# This PCD defines the print string.
|
|
# This PCD is a sample to explain FixedAtBuild String PCD usage.
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
|
|
|
|
##
|
|
# This PCD defines the times to print hello world string.
|
|
# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
|
|
|
|
[PcdsFixedAtBuild.IA32]
|
|
## Default EFI boot path name for IA32 architecture, this path is relative to
|
|
# EFI boot disk.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTIA32.EFI"|VOID*|0x40000003
|
|
|
|
[PcdsFixedAtBuild.X64]
|
|
## Default EFI boot path name for X64 architecture, this path is relative to
|
|
# EFI boot disk.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTX64.EFI"|VOID*|0x40000003
|
|
|
|
[PcdsFixedAtBuild.IPF]
|
|
## Default EFI boot path name for IPF architecture, this path is relative to
|
|
# EFI boot disk.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTIA64.EFI"|VOID*|0x40000003
|
|
|
|
[PcdsFixedAtBuild.EBC]
|
|
## Default EFI boot path name for EBC architecture, this path is relative to
|
|
# EFI boot disk.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTEBC.EFI"|VOID*|0x40000003
|
|
|
|
[PcdsDynamic.common]
|
|
## Base address of the NV variable range in flash device
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
|
|
|
|
## Base address of the FTW spare block range in flash device.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
|
|
|
|
## Base address of the FTW working block range in flash device.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
|
|
|
|
## Default timeout value for displaying progressing bar in before boot OS.
|
|
# This value can be changed in BDS.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001
|
|
|
|
## Error level for hardware recorder.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002
|
|
|
|
##
|
|
# This PCD defines the print string.
|
|
# This PCD is a sample to explain Dynamic PCD usage.
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
|
|
|
|
##
|
|
# This PCD defines the times to print hello world string.
|
|
# This PCD is a sample to explain Dynamic UINT32 PCD usage.
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
|
|
|
|
##
|
|
# This PCD defines the Console output column and the default value is 25 according to UEFI spec
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
|
|
|
|
##
|
|
# This PCD defines the Console output row and the default value is 80 according to UEFI spec
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
|
|
|
|
[PcdsPatchableInModule.common]
|
|
## Maximun number of performance log entries during PEI phase.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
|
|
|
|
## Default timeout value for displaying progressing bar in before boot OS.
|
|
# This value can be changed in BDS.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001
|
|
|
|
## Error level for hardware recorder.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002
|
|
|
|
##
|
|
# This PCD defines the Console output column and the default value is 25 according to UEFI spec
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
|
|
|
|
##
|
|
# This PCD defines the Console output row and the default value is 80 according to UEFI spec
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
|
|
##
|
|
# This PCD defines the times to print hello world string.
|
|
# This PCD is a sample to explain Patchable UINT32 PCD usage.
|
|
##
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
|
|
|
|
[PcdsFeatureFlag.IA32]
|
|
## If TRUE, the DXE IPL will load a 64-bit DxeCore.
|
|
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
|
|
|