9344f09215
https://bugzilla.tianocore.org/show_bug.cgi?id=1373 Replace BSD 2-Clause License with BSD+Patent License. This change is based on the following emails: https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html RFCs with detailed process for the license change: V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
503 lines
27 KiB
C
503 lines
27 KiB
C
/** @file
|
|
EFI_USB_HC_PROTOCOL as defined in EFI 1.10.
|
|
|
|
The USB Host Controller Protocol is used by code, typically USB bus drivers,
|
|
running in the EFI boot services environment, to perform data transactions
|
|
over a USB bus. In addition, it provides an abstraction for the root hub of the USB bus.
|
|
|
|
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
|
|
SPDX-License-Identifier: BSD-2-Clause-Patent
|
|
|
|
**/
|
|
|
|
#ifndef _USB_HOSTCONTROLLER_H_
|
|
#define _USB_HOSTCONTROLLER_H_
|
|
|
|
#include <Protocol/Usb2HostController.h>
|
|
|
|
#define EFI_USB_HC_PROTOCOL_GUID \
|
|
{ \
|
|
0xf5089266, 0x1aa0, 0x4953, {0x97, 0xd8, 0x56, 0x2f, 0x8a, 0x73, 0xb5, 0x19 } \
|
|
}
|
|
|
|
///
|
|
/// Forward reference for pure ANSI compatability
|
|
///
|
|
typedef struct _EFI_USB_HC_PROTOCOL EFI_USB_HC_PROTOCOL;
|
|
|
|
//
|
|
// Protocol definitions
|
|
//
|
|
|
|
/**
|
|
Provides software reset for the USB host controller.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param Attributes A bit mask of the reset operation to perform.
|
|
|
|
@retval EFI_SUCCESS The reset operation succeeded.
|
|
@retval EFI_UNSUPPORTED The type of reset specified by Attributes is not currently supported
|
|
by the host controller hardware.
|
|
@retval EFI_INVALID_PARAMETER Attributes is not valid.
|
|
@retval EFI_DEVICE_ERROR An error was encountered while attempting to perform the reset operation.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_RESET)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT16 Attributes
|
|
);
|
|
|
|
/**
|
|
Retrieves current state of the USB host controller.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param State A pointer to the EFI_USB_HC_STATE data structure that
|
|
indicates current state of the USB host controller.
|
|
|
|
@retval EFI_SUCCESS The state information of the host controller was returned in State.
|
|
@retval EFI_INVALID_PARAMETER State is NULL.
|
|
@retval EFI_DEVICE_ERROR An error was encountered while attempting to retrieve the host controller's
|
|
current state.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_GET_STATE)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
OUT EFI_USB_HC_STATE *State
|
|
);
|
|
|
|
/**
|
|
Sets the USB host controller to a specific state.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param State Indicates the state of the host controller that will be set.
|
|
|
|
@retval EFI_SUCCESS The USB host controller was successfully placed in the state specified by
|
|
State.
|
|
@retval EFI_INVALID_PARAMETER State is NULL.
|
|
@retval EFI_DEVICE_ERROR Failed to set the state specified by State due to device error.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_SET_STATE)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN EFI_USB_HC_STATE State
|
|
);
|
|
|
|
/**
|
|
Submits control transfer to a target USB device.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param DeviceAddress Represents the address of the target device on the USB, which is
|
|
assigned during USB enumeration.
|
|
@param IsSlowDevice Indicates whether the target device is slow device or full-speed
|
|
device.
|
|
@param MaximumPacketLength Indicates the maximum packet size that the default control
|
|
transfer endpoint is capable of sending or receiving.
|
|
@param Request A pointer to the USB device request that will be sent to the USB
|
|
device.
|
|
@param TransferDirection Specifies the data direction for the transfer. There are three
|
|
values available, EfiUsbDataIn, EfiUsbDataOut and EfiUsbNoData.
|
|
@param Data A pointer to the buffer of data that will be transmitted to USB
|
|
device or received from USB device.
|
|
@param DataLength On input, indicates the size, in bytes, of the data buffer specified
|
|
by Data. On output, indicates the amount of data actually
|
|
transferred.
|
|
@param TimeOut Indicates the maximum time, in milliseconds, which the transfer
|
|
is allowed to complete.
|
|
@param TransferResult A pointer to the detailed result information generated by this
|
|
control transfer.
|
|
|
|
@retval EFI_SUCCESS The control transfer was completed successfully.
|
|
@retval EFI_OUT_OF_RESOURCES The control transfer could not be completed due to a lack of resources.
|
|
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
|
|
@retval EFI_TIMEOUT The control transfer failed due to timeout.
|
|
@retval EFI_DEVICE_ERROR The control transfer failed due to host controller or device error.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_CONTROL_TRANSFER)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 DeviceAddress,
|
|
IN BOOLEAN IsSlowDevice,
|
|
IN UINT8 MaximumPacketLength,
|
|
IN EFI_USB_DEVICE_REQUEST *Request,
|
|
IN EFI_USB_DATA_DIRECTION TransferDirection,
|
|
IN OUT VOID *Data OPTIONAL,
|
|
IN OUT UINTN *DataLength OPTIONAL,
|
|
IN UINTN TimeOut,
|
|
OUT UINT32 *TransferResult
|
|
);
|
|
|
|
/**
|
|
Submits bulk transfer to a bulk endpoint of a USB device.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param DeviceAddress Represents the address of the target device on the USB, which is
|
|
assigned during USB enumeration.
|
|
@param EndPointAddress The combination of an endpoint number and an endpoint
|
|
direction of the target USB device. Each endpoint address
|
|
supports data transfer in one direction except the control
|
|
endpoint (whose default endpoint address is 0). It is the
|
|
caller's responsibility to make sure that the EndPointAddress
|
|
represents a bulk endpoint.
|
|
@param MaximumPacketLength Indicates the maximum packet size that the default control
|
|
transfer endpoint is capable of sending or receiving.
|
|
@param Data A pointer to the buffer of data that will be transmitted to USB
|
|
device or received from USB device.
|
|
@param DataLength On input, indicates the size, in bytes, of the data buffer specified
|
|
by Data. On output, indicates the amount of data actually
|
|
transferred.
|
|
@param DataToggle A pointer to the data toggle value.
|
|
@param TimeOut Indicates the maximum time, in milliseconds, which the transfer
|
|
is allowed to complete.
|
|
@param TransferResult A pointer to the detailed result information of the bulk transfer.
|
|
|
|
@retval EFI_SUCCESS The bulk transfer was completed successfully.
|
|
@retval EFI_OUT_OF_RESOURCES The bulk transfer could not be completed due to a lack of resources.
|
|
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
|
|
@retval EFI_TIMEOUT The bulk transfer failed due to timeout.
|
|
@retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_BULK_TRANSFER)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 DeviceAddress,
|
|
IN UINT8 EndPointAddress,
|
|
IN UINT8 MaximumPacketLength,
|
|
IN OUT VOID *Data,
|
|
IN OUT UINTN *DataLength,
|
|
IN OUT UINT8 *DataToggle,
|
|
IN UINTN TimeOut,
|
|
OUT UINT32 *TransferResult
|
|
);
|
|
|
|
/**
|
|
Submits an asynchronous interrupt transfer to an interrupt endpoint of a USB device.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param DeviceAddress Represents the address of the target device on the USB, which is
|
|
assigned during USB enumeration.
|
|
@param EndPointAddress The combination of an endpoint number and an endpoint
|
|
direction of the target USB device. Each endpoint address
|
|
supports data transfer in one direction except the control
|
|
endpoint (whose default endpoint address is zero). It is the
|
|
caller's responsibility to make sure that the
|
|
EndPointAddress represents an interrupt endpoint.
|
|
@param IsSlowDevice Indicates whether the target device is slow device or full-speed
|
|
device.
|
|
@param MaximumPacketLength Indicates the maximum packet size that the default control
|
|
transfer endpoint is capable of sending or receiving.
|
|
@param IsNewTransfer If TRUE, an asynchronous interrupt pipe is built between the host
|
|
and the target interrupt endpoint. If FALSE, the specified asynchronous
|
|
interrupt pipe is canceled. If TRUE, and an interrupt transfer exists
|
|
for the target end point, then EFI_INVALID_PARAMETER is returned.
|
|
@param DataToggle A pointer to the data toggle value. On input, it is valid when
|
|
IsNewTransfer is TRUE, and it indicates the initial data toggle
|
|
value the asynchronous interrupt transfer should adopt. On output,
|
|
it is valid when IsNewTransfer is FALSE, and it is updated to indicate
|
|
the data toggle value of the subsequent asynchronous interrupt transfer.
|
|
@param PollingInterval Indicates the interval, in milliseconds, that the asynchronous
|
|
interrupt transfer is polled.
|
|
@param DataLength Indicates the length of data to be received at the rate specified by
|
|
PollingInterval from the target asynchronous interrupt
|
|
endpoint. This parameter is only required when IsNewTransfer is TRUE.
|
|
@param CallBackFunction The Callback function. This function is called at the rate specified by
|
|
PollingInterval. This parameter is only required when IsNewTransfer is TRUE.
|
|
@param Context The context that is passed to the CallBackFunction.
|
|
|
|
@retval EFI_SUCCESS The asynchronous interrupt transfer request has been successfully
|
|
submitted or canceled.
|
|
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
|
|
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
|
|
@retval EFI_TIMEOUT The bulk transfer failed due to timeout.
|
|
@retval EFI_DEVICE_ERROR The bulk transfer failed due to host controller or device error.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 DeviceAddress,
|
|
IN UINT8 EndPointAddress,
|
|
IN BOOLEAN IsSlowDevice,
|
|
IN UINT8 MaxiumPacketLength,
|
|
IN BOOLEAN IsNewTransfer,
|
|
IN OUT UINT8 *DataToggle,
|
|
IN UINTN PollingInterval OPTIONAL,
|
|
IN UINTN DataLength OPTIONAL,
|
|
IN EFI_ASYNC_USB_TRANSFER_CALLBACK CallBackFunction OPTIONAL,
|
|
IN VOID *Context OPTIONAL
|
|
);
|
|
|
|
/**
|
|
Submits synchronous interrupt transfer to an interrupt endpoint of a USB device.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param DeviceAddress Represents the address of the target device on the USB, which is
|
|
assigned during USB enumeration.
|
|
@param EndPointAddress The combination of an endpoint number and an endpoint
|
|
direction of the target USB device. Each endpoint address
|
|
supports data transfer in one direction except the control
|
|
endpoint (whose default endpoint address is zero). It is the
|
|
caller's responsibility to make sure that the
|
|
EndPointAddress represents an interrupt endpoint.
|
|
@param IsSlowDevice Indicates whether the target device is slow device or full-speed
|
|
device.
|
|
@param MaximumPacketLength Indicates the maximum packet size that the default control
|
|
transfer endpoint is capable of sending or receiving.
|
|
@param Data A pointer to the buffer of data that will be transmitted to USB
|
|
device or received from USB device. asynchronous interrupt pipe is canceled.
|
|
@param DataLength On input, the size, in bytes, of the data buffer specified by Data.
|
|
On output, the number of bytes transferred.
|
|
@param DataToggle A pointer to the data toggle value. On input, it indicates the initial
|
|
data toggle value the synchronous interrupt transfer should adopt;
|
|
on output, it is updated to indicate the data toggle value of the
|
|
subsequent synchronous interrupt transfer.
|
|
@param TimeOut Indicates the maximum time, in milliseconds, which the transfer
|
|
is allowed to complete.
|
|
@param TransferResult A pointer to the detailed result information from the synchronous
|
|
interrupt transfer.
|
|
|
|
@retval EFI_SUCCESS The synchronous interrupt transfer was completed successfully.
|
|
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
|
|
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
|
|
@retval EFI_TIMEOUT The synchronous interrupt transfer failed due to timeout.
|
|
@retval EFI_DEVICE_ERROR The synchronous interrupt transfer failed due to host controller or device error.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 DeviceAddress,
|
|
IN UINT8 EndPointAddress,
|
|
IN BOOLEAN IsSlowDevice,
|
|
IN UINT8 MaximumPacketLength,
|
|
IN OUT VOID *Data,
|
|
IN OUT UINTN *DataLength,
|
|
IN OUT UINT8 *DataToggle,
|
|
IN UINTN TimeOut,
|
|
OUT UINT32 *TransferResult
|
|
);
|
|
|
|
/**
|
|
Submits isochronous transfer to an isochronous endpoint of a USB device.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param DeviceAddress Represents the address of the target device on the USB, which is
|
|
assigned during USB enumeration.
|
|
@param EndPointAddress The combination of an endpoint number and an endpoint
|
|
direction of the target USB device. Each endpoint address
|
|
supports data transfer in one direction except the control
|
|
endpoint (whose default endpoint address is 0). It is the caller's
|
|
responsibility to make sure that the EndPointAddress
|
|
represents an isochronous endpoint.
|
|
@param MaximumPacketLength Indicates the maximum packet size that the default control
|
|
transfer endpoint is capable of sending or receiving.
|
|
@param Data A pointer to the buffer of data that will be transmitted to USB
|
|
device or received from USB device. asynchronous interrupt pipe is canceled.
|
|
@param DataLength Specifies the length, in bytes, of the data to be sent to or received
|
|
from the USB device.
|
|
@param TransferResult A pointer to the detailed result information from the isochronous
|
|
transfer.
|
|
|
|
@retval EFI_SUCCESS The isochronous transfer was completed successfully.
|
|
@retval EFI_OUT_OF_RESOURCES The isochronous could not be completed due to a lack of resources.
|
|
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
|
|
@retval EFI_TIMEOUT The isochronous transfer failed due to timeout.
|
|
@retval EFI_DEVICE_ERROR The isochronous transfer failed due to host controller or device error.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_ISOCHRONOUS_TRANSFER)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 DeviceAddress,
|
|
IN UINT8 EndPointAddress,
|
|
IN UINT8 MaximumPacketLength,
|
|
IN OUT VOID *Data,
|
|
IN UINTN DataLength,
|
|
OUT UINT32 *TransferResult
|
|
);
|
|
|
|
/**
|
|
Submits nonblocking isochronous transfer to an isochronous endpoint of a USB device.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param DeviceAddress Represents the address of the target device on the USB, which is
|
|
assigned during USB enumeration.
|
|
@param EndPointAddress The combination of an endpoint number and an endpoint
|
|
direction of the target USB device. Each endpoint address
|
|
supports data transfer in one direction except the control
|
|
endpoint (whose default endpoint address is zero). It is the
|
|
caller's responsibility to make sure that the
|
|
EndPointAddress represents an isochronous endpoint.
|
|
@param MaximumPacketLength Indicates the maximum packet size that the default control
|
|
transfer endpoint is capable of sending or receiving. For isochronous
|
|
endpoints, this value is used to reserve the bus time in the schedule,
|
|
required for the perframe data payloads. The pipe may, on an ongoing basis,
|
|
actually use less bandwidth than that reserved.
|
|
@param Data A pointer to the buffer of data that will be transmitted to USB
|
|
device or received from USB device. asynchronous interrupt pipe is canceled.
|
|
@param DataLength Specifies the length, in bytes, of the data to be sent to or received
|
|
from the USB device.
|
|
@param IsochronousCallback The Callback function.This function is called if the requested
|
|
isochronous transfer is completed.
|
|
@param Context Data passed to the IsochronousCallback function. This is
|
|
an optional parameter and may be NULL.
|
|
|
|
@retval EFI_SUCCESS The asynchronous isochronous transfer was completed successfully.
|
|
@retval EFI_OUT_OF_RESOURCES The asynchronous isochronous could not be completed due to a lack of resources.
|
|
@retval EFI_INVALID_PARAMETER Some parameters are invalid.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 DeviceAddress,
|
|
IN UINT8 EndPointAddress,
|
|
IN UINT8 MaximumPacketLength,
|
|
IN OUT VOID *Data,
|
|
IN UINTN DataLength,
|
|
IN EFI_ASYNC_USB_TRANSFER_CALLBACK IsochronousCallBack,
|
|
IN VOID *Context OPTIONAL
|
|
);
|
|
|
|
/**
|
|
Retrieves the number of root hub ports.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param PortNumber A pointer to the number of the root hub ports.
|
|
|
|
@retval EFI_SUCCESS The port number was retrieved successfully.
|
|
@retval EFI_DEVICE_ERROR An error was encountered while attempting to retrieve the port number.
|
|
@retval EFI_INVALID_PARAMETER PortNumber is NULL.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_NUMBER)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
OUT UINT8 *PortNumber
|
|
);
|
|
|
|
/**
|
|
Retrieves the current status of a USB root hub port.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param PortNumber Specifies the root hub port from which the status is to be retrieved.
|
|
This value is zero based. For example, if a root hub has two ports,
|
|
then the first port is numbered 0, and the second port is
|
|
numbered 1.
|
|
@param PortStatus A pointer to the current port status bits and port status change bits.
|
|
|
|
@retval EFI_SUCCESS The status of the USB root hub port specified by PortNumber
|
|
was returned in PortStatus.
|
|
@retval EFI_INVALID_PARAMETER PortNumber is invalid.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 PortNumber,
|
|
OUT EFI_USB_PORT_STATUS *PortStatus
|
|
);
|
|
|
|
/**
|
|
Sets a feature for the specified root hub port.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param PortNumber Specifies the root hub port from which the status is to be retrieved.
|
|
This value is zero based. For example, if a root hub has two ports,
|
|
then the first port is numbered 0, and the second port is
|
|
numbered 1.
|
|
@param PortFeature Indicates the feature selector associated with the feature set
|
|
request.
|
|
|
|
@retval EFI_SUCCESS The feature specified by PortFeature was set for the USB
|
|
root hub port specified by PortNumber.
|
|
@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 PortNumber,
|
|
IN EFI_USB_PORT_FEATURE PortFeature
|
|
);
|
|
|
|
/**
|
|
Clears a feature for the specified root hub port.
|
|
|
|
@param This A pointer to the EFI_USB_HC_PROTOCOL instance.
|
|
@param PortNumber Specifies the root hub port from which the status is to be retrieved.
|
|
This value is zero based. For example, if a root hub has two ports,
|
|
then the first port is numbered 0, and the second port is
|
|
numbered 1.
|
|
@param PortFeature Indicates the feature selector associated with the feature clear
|
|
request.
|
|
|
|
@retval EFI_SUCCESS The feature specified by PortFeature was cleared for the USB
|
|
root hub port specified by PortNumber.
|
|
@retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid for this function.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_USB_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE)(
|
|
IN EFI_USB_HC_PROTOCOL *This,
|
|
IN UINT8 PortNumber,
|
|
IN EFI_USB_PORT_FEATURE PortFeature
|
|
);
|
|
|
|
|
|
///
|
|
/// The EFI_USB_HC_PROTOCOL provides USB host controller management, basic data transactions
|
|
/// over a USB bus, and USB root hub access. A device driver that wishes to manage a USB bus in a
|
|
/// system retrieves the EFI_USB_HC_PROTOCOL instance that is associated with the USB bus to be
|
|
/// managed. A device handle for a USB host controller will minimally contain an
|
|
/// EFI_DEVICE_PATH_PROTOCOL instance, and an EFI_USB_HC_PROTOCOL instance.
|
|
///
|
|
struct _EFI_USB_HC_PROTOCOL {
|
|
EFI_USB_HC_PROTOCOL_RESET Reset;
|
|
EFI_USB_HC_PROTOCOL_GET_STATE GetState;
|
|
EFI_USB_HC_PROTOCOL_SET_STATE SetState;
|
|
EFI_USB_HC_PROTOCOL_CONTROL_TRANSFER ControlTransfer;
|
|
EFI_USB_HC_PROTOCOL_BULK_TRANSFER BulkTransfer;
|
|
EFI_USB_HC_PROTOCOL_ASYNC_INTERRUPT_TRANSFER AsyncInterruptTransfer;
|
|
EFI_USB_HC_PROTOCOL_SYNC_INTERRUPT_TRANSFER SyncInterruptTransfer;
|
|
EFI_USB_HC_PROTOCOL_ISOCHRONOUS_TRANSFER IsochronousTransfer;
|
|
EFI_USB_HC_PROTOCOL_ASYNC_ISOCHRONOUS_TRANSFER AsyncIsochronousTransfer;
|
|
EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_NUMBER GetRootHubPortNumber;
|
|
EFI_USB_HC_PROTOCOL_GET_ROOTHUB_PORT_STATUS GetRootHubPortStatus;
|
|
EFI_USB_HC_PROTOCOL_SET_ROOTHUB_PORT_FEATURE SetRootHubPortFeature;
|
|
EFI_USB_HC_PROTOCOL_CLEAR_ROOTHUB_PORT_FEATURE ClearRootHubPortFeature;
|
|
///
|
|
/// The major revision number of the USB host controller. The revision information
|
|
/// indicates the release of the Universal Serial Bus Specification with which the
|
|
/// host controller is compliant.
|
|
///
|
|
UINT16 MajorRevision;
|
|
///
|
|
/// The minor revision number of the USB host controller. The revision information
|
|
/// indicates the release of the Universal Serial Bus Specification with which the
|
|
/// host controller is compliant.
|
|
///
|
|
UINT16 MinorRevision;
|
|
};
|
|
|
|
extern EFI_GUID gEfiUsbHcProtocolGuid;
|
|
|
|
#endif
|