sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
bf2786dc7900cb5ef04c9c5c720c0a26f11898b8
system76-edk2/UefiCpuPkg/Library/MpInitLib/Ia32/MpFuncs.nasm
Jeff Fan bf2786dc79 UefiCpuPkg/DxeMpLib: Allocate new safe stack < 4GB 
For long mode DXE, we will disable paging on AP to protected mode to execute AP
safe loop code in reserved memory range under 4GB. But we forget to allocate
stack for AP under 4GB and AP still are using original AP stack. If original AP
stack is larger than 4GB, it cannot be used after AP is transferred to protected
mode. Besides MwaitSupport == TRUE, AP stack is still required during phase of
disabling paging in long mode DXE.

Moreover, even though AP stack is always under 4GB (a) in Ia32 DXE and (b) with
this patch, after transferring to protected mode from X64 DXE, AP stack
(in BootServiceData) maybe crashed by OS after Exit Boot Service event.

This fix is to allocate reserved memory range under 4GB together with AP safe
loop code. APs will switch to new stack in safe loop code.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
2016-11-28 08:56:36 +08:00

339 lines
10 KiB
NASM
Raw Blame History

;------------------------------------------------------------------------------ ;
; Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Module Name:
;
; MpFuncs.nasm
;
; Abstract:
;
; This is the assembly code for MP support
;
;-------------------------------------------------------------------------------
%include "MpEqu.inc"
extern ASM_PFX(InitializeFloatingPointUnits)
SECTION .text
;-------------------------------------------------------------------------------------
;RendezvousFunnelProc procedure follows. All APs execute their procedure. This
;procedure serializes all the AP processors through an Init sequence. It must be
;noted that APs arrive here very raw...ie: real mode, no stack.
;ALSO THIS PROCEDURE IS EXECUTED BY APs ONLY ON 16 BIT MODE. HENCE THIS PROC
;IS IN MACHINE CODE.
;-------------------------------------------------------------------------------------
global ASM_PFX(RendezvousFunnelProc)
ASM_PFX(RendezvousFunnelProc):
RendezvousFunnelProcStart:
; At this point CS = 0x(vv00) and ip= 0x0.
BITS 16
mov ebp, eax ; save BIST information
mov ax, cs
mov ds, ax
mov es, ax
mov ss, ax
xor ax, ax
mov fs, ax
mov gs, ax
mov si, BufferStartLocation
mov ebx, [si]
mov si, ModeOffsetLocation
mov eax, [si]
mov si, CodeSegmentLocation
mov edx, [si]
mov di, ax
sub di, 02h
mov [di], dx
sub di, 04h
add eax, ebx
mov [di],eax
mov si, DataSegmentLocation
mov edx, [si]
mov si, GdtrLocation
o32 lgdt [cs:si]
mov si, IdtrLocation
o32 lidt [cs:si]
xor ax, ax
mov ds, ax
mov eax, cr0 ; Get control register 0
or eax, 000000003h ; Set PE bit (bit #0) & MP
mov cr0, eax
jmp 0:strict dword 0 ; far jump to protected mode
BITS 32
Flat32Start: ; protected mode entry point
mov ds, dx
mov es, dx
mov fs, dx
mov gs, dx
mov ss, dx
mov esi, ebx
mov edi, esi
add edi, EnableExecuteDisableLocation
cmp byte [edi], 0
jz SkipEnableExecuteDisable
;
; Enable IA32 PAE execute disable
;
mov ecx, 0xc0000080
rdmsr
bts eax, 11
wrmsr
mov edi, esi
add edi, Cr3Location
mov eax, dword [edi]
mov cr3, eax
mov eax, cr4
bts eax, 5
mov cr4, eax
mov eax, cr0
bts eax, 31
mov cr0, eax
SkipEnableExecuteDisable:
mov edi, esi
add edi, InitFlagLocation
cmp dword [edi], 1 ; 1 == ApInitConfig
jnz GetApicId
; AP init
mov edi, esi
add edi, LockLocation
mov eax, NotVacantFlag
TestLock:
xchg [edi], eax
cmp eax, NotVacantFlag
jz TestLock
mov ecx, esi
add ecx, NumApsExecutingLocation
inc dword [ecx]
mov ebx, [ecx]
Releaselock:
mov eax, VacantFlag
xchg [edi], eax
mov edi, esi
add edi, StackSizeLocation
mov eax, [edi]
mov ecx, ebx
inc ecx
mul ecx ; EAX = StackSize * (CpuNumber + 1)
mov edi, esi
add edi, StackStartAddressLocation
add eax, [edi]
mov esp, eax
jmp CProcedureInvoke
GetApicId:
mov eax, 0
cpuid
cmp eax, 0bh
jb NoX2Apic ; CPUID level below CPUID_EXTENDED_TOPOLOGY
mov eax, 0bh
xor ecx, ecx
cpuid
test ebx, 0ffffh
jz NoX2Apic ; CPUID.0BH:EBX[15:0] is zero
; Processor is x2APIC capable; 32-bit x2APIC ID is already in EDX
jmp GetProcessorNumber
NoX2Apic:
; Processor is not x2APIC capable, so get 8-bit APIC ID
mov eax, 1
cpuid
shr ebx, 24
mov edx, ebx
GetProcessorNumber:
;
; Get processor number for this AP
; Note that BSP may become an AP due to SwitchBsp()
;
xor ebx, ebx
lea eax, [esi + CpuInfoLocation]
mov edi, [eax]
GetNextProcNumber:
cmp [edi], edx ; APIC ID match?
jz ProgramStack
add edi, 20
inc ebx
jmp GetNextProcNumber
ProgramStack:
mov esp, [edi + 12]
CProcedureInvoke:
push ebp ; push BIST data at top of AP stack
xor ebp, ebp ; clear ebp for call stack trace
push ebp
mov ebp, esp
mov eax, ASM_PFX(InitializeFloatingPointUnits)
call eax ; Call assembly function to initialize FPU per UEFI spec
push ebx ; Push NumApsExecuting
mov eax, esi
add eax, LockLocation
push eax ; push address of exchange info data buffer
mov edi, esi
add edi, ApProcedureLocation
mov eax, [edi]
call eax ; Invoke C function
jmp $ ; Never reach here
RendezvousFunnelProcEnd:
;-------------------------------------------------------------------------------------
; AsmRelocateApLoop (MwaitSupport, ApTargetCState, PmCodeSegment, TopOfApStack);
;-------------------------------------------------------------------------------------
global ASM_PFX(AsmRelocateApLoop)
ASM_PFX(AsmRelocateApLoop):
AsmRelocateApLoopStart:
mov eax, esp
mov esp, [eax + 16] ; TopOfApStack
push dword [eax] ; push return address for stack trace
push ebp
mov ebp, esp
mov ebx, [eax + 8] ; ApTargetCState
mov ecx, [eax + 4] ; MwaitSupport
cmp cl, 1 ; Check mwait-monitor support
jnz HltLoop
MwaitLoop:
mov eax, esp
xor ecx, ecx
xor edx, edx
monitor
mov eax, ebx ; Mwait Cx, Target C-State per eax[7:4]
shl eax, 4
mwait
jmp MwaitLoop
HltLoop:
cli
hlt
jmp HltLoop
ret
AsmRelocateApLoopEnd:
;-------------------------------------------------------------------------------------
; AsmGetAddressMap (&AddressMap);
;-------------------------------------------------------------------------------------
global ASM_PFX(AsmGetAddressMap)
ASM_PFX(AsmGetAddressMap):
pushad
mov ebp,esp
mov ebx, [ebp + 24h]
mov dword [ebx], RendezvousFunnelProcStart
mov dword [ebx + 4h], Flat32Start - RendezvousFunnelProcStart
mov dword [ebx + 8h], RendezvousFunnelProcEnd - RendezvousFunnelProcStart
mov dword [ebx + 0Ch], AsmRelocateApLoopStart
mov dword [ebx + 10h], AsmRelocateApLoopEnd - AsmRelocateApLoopStart
popad
ret
;-------------------------------------------------------------------------------------
;AsmExchangeRole procedure follows. This procedure executed by current BSP, that is
;about to become an AP. It switches it'stack with the current AP.
;AsmExchangeRole (IN CPU_EXCHANGE_INFO *MyInfo, IN CPU_EXCHANGE_INFO *OthersInfo);
;-------------------------------------------------------------------------------------
global ASM_PFX(AsmExchangeRole)
ASM_PFX(AsmExchangeRole):
; DO NOT call other functions in this function, since 2 CPU may use 1 stack
; at the same time. If 1 CPU try to call a function, stack will be corrupted.
pushad
mov ebp,esp
; esi contains MyInfo pointer
mov esi, [ebp + 24h]
; edi contains OthersInfo pointer
mov edi, [ebp + 28h]
;Store EFLAGS, GDTR and IDTR register to stack
pushfd
mov eax, cr4
push eax ; push cr4 firstly
mov eax, cr0
push eax
sgdt [esi + 8]
sidt [esi + 14]
; Store the its StackPointer
mov [esi + 4],esp
; update its switch state to STORED
mov byte [esi], CPU_SWITCH_STATE_STORED
WaitForOtherStored:
; wait until the other CPU finish storing its state
cmp byte [edi], CPU_SWITCH_STATE_STORED
jz OtherStored
pause
jmp WaitForOtherStored
OtherStored:
; Since another CPU already stored its state, load them
; load GDTR value
lgdt [edi + 8]
; load IDTR value
lidt [edi + 14]
; load its future StackPointer
mov esp, [edi + 4]
; update the other CPU's switch state to LOADED
mov byte [edi], CPU_SWITCH_STATE_LOADED
WaitForOtherLoaded:
; wait until the other CPU finish loading new state,
; otherwise the data in stack may corrupt
cmp byte [esi], CPU_SWITCH_STATE_LOADED
jz OtherLoaded
pause
jmp WaitForOtherLoaded
OtherLoaded:
; since the other CPU already get the data it want, leave this procedure
pop eax
mov cr0, eax
pop eax
mov cr4, eax
popfd
popad
ret
Reference in New Issue View Git Blame Copy Permalink