Files
system76-edk2/UefiCpuPkg/PiSmmCpuDxeSmm/Ia32/SmiEntry.nasm
Liming Gao ccf8184ac3 UefiCpuPkg: Update PiSmmCpuDxeSmm pass XCODE5 tool chain
https://bugzilla.tianocore.org/show_bug.cgi?id=849

In V2, use "mov rax, strict qword 0" to replace the hard code db.

1. Use lea instruction to get the address instead of mov instruction.
2. Use the dummy address as jmp destination, and add the logic to fix up
the address to the absolute address at boot time.
3. On MpFuncs.nasm, use ExchangeInfo to record InitializeFloatingPointUnits.
This way is same to MpInitLib.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit e21e355e2c)

# Conflicts:
#	UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.h
2018-04-11 09:37:45 +08:00

213 lines
5.9 KiB
NASM

;------------------------------------------------------------------------------ ;
; Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
; This program and the accompanying materials
; are licensed and made available under the terms and conditions of the BSD License
; which accompanies this distribution. The full text of the license may be found at
; http://opensource.org/licenses/bsd-license.php.
;
; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
;
; Module Name:
;
; SmiEntry.nasm
;
; Abstract:
;
; Code template of the SMI handler for a particular processor
;
;-------------------------------------------------------------------------------
%define MSR_IA32_MISC_ENABLE 0x1A0
%define MSR_EFER 0xc0000080
%define MSR_EFER_XD 0x800
;
; Constants relating to PROCESSOR_SMM_DESCRIPTOR
;
%define DSC_OFFSET 0xfb00
%define DSC_GDTPTR 0x30
%define DSC_GDTSIZ 0x38
%define DSC_CS 14
%define DSC_DS 16
%define DSC_SS 18
%define DSC_OTHERSEG 20
%define PROTECT_MODE_CS 0x8
%define PROTECT_MODE_DS 0x20
%define TSS_SEGMENT 0x40
extern ASM_PFX(SmiRendezvous)
extern ASM_PFX(FeaturePcdGet (PcdCpuSmmStackGuard))
extern ASM_PFX(CpuSmmDebugEntry)
extern ASM_PFX(CpuSmmDebugExit)
global ASM_PFX(gcSmiHandlerTemplate)
global ASM_PFX(gcSmiHandlerSize)
global ASM_PFX(gSmiCr3)
global ASM_PFX(gSmiStack)
global ASM_PFX(gSmbase)
global ASM_PFX(mXdSupported)
extern ASM_PFX(gSmiHandlerIdtr)
SECTION .text
BITS 16
ASM_PFX(gcSmiHandlerTemplate):
_SmiEntryPoint:
mov bx, _GdtDesc - _SmiEntryPoint + 0x8000
mov ax,[cs:DSC_OFFSET + DSC_GDTSIZ]
dec ax
mov [cs:bx], ax
mov eax, [cs:DSC_OFFSET + DSC_GDTPTR]
mov [cs:bx + 2], eax
mov ebp, eax ; ebp = GDT base
o32 lgdt [cs:bx] ; lgdt fword ptr cs:[bx]
mov ax, PROTECT_MODE_CS
mov [cs:bx-0x2],ax
DB 0x66, 0xbf ; mov edi, SMBASE
ASM_PFX(gSmbase): DD 0
lea eax, [edi + (@32bit - _SmiEntryPoint) + 0x8000]
mov [cs:bx-0x6],eax
mov ebx, cr0
and ebx, 0x9ffafff3
or ebx, 0x23
mov cr0, ebx
jmp dword 0x0:0x0
_GdtDesc:
DW 0
DD 0
BITS 32
@32bit:
mov ax, PROTECT_MODE_DS
o16 mov ds, ax
o16 mov es, ax
o16 mov fs, ax
o16 mov gs, ax
o16 mov ss, ax
DB 0xbc ; mov esp, imm32
ASM_PFX(gSmiStack): DD 0
mov eax, ASM_PFX(gSmiHandlerIdtr)
lidt [eax]
jmp ProtFlatMode
ProtFlatMode:
DB 0xb8 ; mov eax, imm32
ASM_PFX(gSmiCr3): DD 0
mov cr3, eax
;
; Need to test for CR4 specific bit support
;
mov eax, 1
cpuid ; use CPUID to determine if specific CR4 bits are supported
xor eax, eax ; Clear EAX
test edx, BIT2 ; Check for DE capabilities
jz .0
or eax, BIT3
.0:
test edx, BIT6 ; Check for PAE capabilities
jz .1
or eax, BIT5
.1:
test edx, BIT7 ; Check for MCE capabilities
jz .2
or eax, BIT6
.2:
test edx, BIT24 ; Check for FXSR capabilities
jz .3
or eax, BIT9
.3:
test edx, BIT25 ; Check for SSE capabilities
jz .4
or eax, BIT10
.4: ; as cr4.PGE is not set here, refresh cr3
mov cr4, eax ; in PreModifyMtrrs() to flush TLB.
cmp byte [dword ASM_PFX(FeaturePcdGet (PcdCpuSmmStackGuard))], 0
jz .6
; Load TSS
mov byte [ebp + TSS_SEGMENT + 5], 0x89 ; clear busy flag
mov eax, TSS_SEGMENT
ltr ax
.6:
; enable NXE if supported
DB 0b0h ; mov al, imm8
ASM_PFX(mXdSupported): DB 1
cmp al, 0
jz @SkipXd
;
; Check XD disable bit
;
mov ecx, MSR_IA32_MISC_ENABLE
rdmsr
push edx ; save MSR_IA32_MISC_ENABLE[63-32]
test edx, BIT2 ; MSR_IA32_MISC_ENABLE[34]
jz .5
and dx, 0xFFFB ; clear XD Disable bit if it is set
wrmsr
.5:
mov ecx, MSR_EFER
rdmsr
or ax, MSR_EFER_XD ; enable NXE
wrmsr
jmp @XdDone
@SkipXd:
sub esp, 4
@XdDone:
mov ebx, cr0
or ebx, 0x80010023 ; enable paging + WP + NE + MP + PE
mov cr0, ebx
lea ebx, [edi + DSC_OFFSET]
mov ax, [ebx + DSC_DS]
mov ds, eax
mov ax, [ebx + DSC_OTHERSEG]
mov es, eax
mov fs, eax
mov gs, eax
mov ax, [ebx + DSC_SS]
mov ss, eax
; jmp _SmiHandler ; instruction is not needed
global ASM_PFX(SmiHandler)
ASM_PFX(SmiHandler):
mov ebx, [esp + 4] ; CPU Index
push ebx
mov eax, ASM_PFX(CpuSmmDebugEntry)
call eax
add esp, 4
push ebx
mov eax, ASM_PFX(SmiRendezvous)
call eax
add esp, 4
push ebx
mov eax, ASM_PFX(CpuSmmDebugExit)
call eax
add esp, 4
mov eax, ASM_PFX(mXdSupported)
mov al, [eax]
cmp al, 0
jz .7
pop edx ; get saved MSR_IA32_MISC_ENABLE[63-32]
test edx, BIT2
jz .7
mov ecx, MSR_IA32_MISC_ENABLE
rdmsr
or dx, BIT2 ; set XD Disable bit if it was set before entering into SMM
wrmsr
.7:
rsm
ASM_PFX(gcSmiHandlerSize): DW $ - _SmiEntryPoint
global ASM_PFX(PiSmmCpuSmiEntryFixupAddress)
ASM_PFX(PiSmmCpuSmiEntryFixupAddress):
ret