sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
d3265fe1611a320f69a4249928e6a36770e4f076
system76-edk2/StdLib/Include/Efi/EfiSocketLib.h
jiaxinwu c581e5037d StdLib: Remove EfiSocketLib and Ip4Config Protocol dependency. 
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: jiaxinwu <jiaxin.wu@intel.com>
Reviewed-by: "Leahy, Leroy P" <leroy.p.leahy@intel.com>

git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17875 6f19259b-4bc3-4df7-8a09-765794883524
2015-07-08 03:12:58 +00:00

753 lines
26 KiB
C
Raw Blame History

/** @file
Definitions for the EFI Socket layer library.
Copyright (c) 2011 - 2015, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _EFI_SOCKET_LIB_H_
#define _EFI_SOCKET_LIB_H_
#include <Uefi.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
#include <Protocol/EfiSocket.h>
#include <Protocol/Ip4Config2.h>
#include <Protocol/Ip6Config.h>
#include <Protocol/ServiceBinding.h>
#include <Protocol/Tcp4.h>
#include <Protocol/Tcp6.h>
#include <Protocol/Udp4.h>
#include <Protocol/Udp6.h>
#include <sys/time.h>
//------------------------------------------------------------------------------
// Constants
//------------------------------------------------------------------------------
#define DEBUG_TPL 0x40000000 ///< Display TPL change messages
#define TPL_SOCKETS TPL_CALLBACK ///< TPL for routine synchronization
//------------------------------------------------------------------------------
// Macros
//------------------------------------------------------------------------------
#if defined(_MSC_VER) /* Handle Microsoft VC++ compiler specifics. */
#define DBG_ENTER() DEBUG (( DEBUG_INFO, "Entering " __FUNCTION__ "\n" )) ///< Display routine entry
#define DBG_EXIT() DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ "\n" )) ///< Display routine exit
#define DBG_EXIT_DEC(Status) DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ ", Status: %d\n", Status )) ///< Display routine exit with decimal value
#define DBG_EXIT_HEX(Status) DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ ", Status: 0x%08x\n", Status )) ///< Display routine exit with hex value
#define DBG_EXIT_STATUS(Status) DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ ", Status: %r\n", Status )) ///< Display routine exit with status value
#define DBG_EXIT_TF(Status) DEBUG (( DEBUG_INFO, "Exiting " __FUNCTION__ ", returning %s\n", (FALSE == Status) ? L"FALSE" : L"TRUE" )) ///< Display routine with TRUE/FALSE value
#else // _MSC_VER
#define DBG_ENTER() ///< Display routine entry
#define DBG_EXIT() ///< Display routine exit
#define DBG_EXIT_DEC(Status) ///< Display routine exit with decimal value
#define DBG_EXIT_HEX(Status) ///< Display routine exit with hex value
#define DBG_EXIT_STATUS(Status) ///< Display routine exit with status value
#define DBG_EXIT_TF(Status) ///< Display routine with TRUE/FALSE value
#endif // _MSC_VER
#define DIM(x) ( sizeof ( x ) / sizeof ( x[0] )) ///< Compute the number of entries in an array
/**
Verify new TPL value
This macro which is enabled when debug is enabled verifies that
the new TPL value is >= the current TPL value.
**/
#ifdef VERIFY_TPL
#undef VERIFY_TPL
#endif // VERIFY_TPL
#if !defined(MDEPKG_NDEBUG)
/**
Verify that the TPL is at the correct level
**/
#define VERIFY_AT_TPL(tpl) \
{ \
EFI_TPL PreviousTpl; \
\
PreviousTpl = EfiGetCurrentTpl ( ); \
if ( PreviousTpl != tpl ) { \
DEBUG (( DEBUG_ERROR | DEBUG_TPL, \
"Current TPL: %d, New TPL: %d\r\n", \
PreviousTpl, tpl )); \
ASSERT ( PreviousTpl == tpl ); \
} \
}
#define VERIFY_TPL(tpl) \
{ \
EFI_TPL PreviousTpl; \
\
PreviousTpl = EfiGetCurrentTpl ( ); \
if ( PreviousTpl > tpl ) { \
DEBUG (( DEBUG_ERROR | DEBUG_TPL, \
"Current TPL: %d, New TPL: %d\r\n", \
PreviousTpl, tpl )); \
ASSERT ( PreviousTpl <= tpl ); \
} \
}
#else // MDEPKG_NDEBUG
#define VERIFY_AT_TPL(tpl) ///< Verify that the TPL is at the correct level
#define VERIFY_TPL(tpl) ///< Verify that the TPL is at the correct level
#endif // MDEPKG_NDEBUG
/**
Raise TPL to the specified level
**/
#define RAISE_TPL(PreviousTpl, tpl) \
VERIFY_TPL ( tpl ); \
PreviousTpl = gBS->RaiseTPL ( tpl );
/**
Restore the TPL to the previous value
**/
#define RESTORE_TPL(tpl) \
gBS->RestoreTPL ( tpl )
//------------------------------------------------------------------------------
// Data Types
//------------------------------------------------------------------------------
typedef struct _ESL_SERVICE ESL_SERVICE; ///< Forward delcaration
/**
Protocol binding and installation control structure
The driver uses this structure to simplify the driver binding processing.
**/
typedef struct {
CHAR16 * pName; ///< Protocol name
EFI_GUID * pNetworkBinding; ///< Network service binding protocol for socket support
EFI_GUID * pNetworkProtocolGuid;///< Network protocol GUID
CONST EFI_GUID * pTagGuid; ///< Tag to mark protocol in use
UINTN ServiceListOffset; ///< Offset in ::ESL_LAYER for the list of services
UINTN RxIo; ///< Number of receive ESL_IO_MGMT structures for data
UINTN TxIoNormal; ///< Number of transmit ESL_IO_MGMT structures for normal data
UINTN TxIoUrgent; ///< Number of transmit ESL_IO_MGMT structures for urgent data
} ESL_SOCKET_BINDING;
//------------------------------------------------------------------------------
// GUIDs
//------------------------------------------------------------------------------
extern CONST EFI_GUID mEslIp4ServiceGuid; ///< Tag GUID for the IPv4 layer
extern CONST EFI_GUID mEslIp6ServiceGuid; ///< Tag GUID for the IPv6 layer
extern CONST EFI_GUID mEslTcp4ServiceGuid; ///< Tag GUID for the TCPv4 layer
extern CONST EFI_GUID mEslTcp6ServiceGuid; ///< Tag GUID for the TCPv6 layer
extern CONST EFI_GUID mEslUdp4ServiceGuid; ///< Tag GUID for the UDPv4 layer
extern CONST EFI_GUID mEslUdp6ServiceGuid; ///< Tag GUID for the UDPv6 layer
//------------------------------------------------------------------------------
// Data
//------------------------------------------------------------------------------
extern CONST ESL_SOCKET_BINDING cEslSocketBinding[];///< List of network service bindings
extern CONST UINTN cEslSocketBindingEntries; ///< Number of network service bindings
//------------------------------------------------------------------------------
// DXE Support Routines
//------------------------------------------------------------------------------
/**
Creates a child handle and installs a protocol.
When the socket application is linked against UseSocketDxe, the ::socket
routine indirectly calls this routine in SocketDxe to create a child
handle if necessary and install the socket protocol on the handle.
Upon return, EslServiceGetProtocol in UseSocketLib returns the
::EFI_SOCKET_PROTOCOL address to the socket routine.
@param [in] pThis Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
@param [in] pChildHandle Pointer to the handle of the child to create. If it is NULL,
then a new handle is created. If it is a pointer to an existing UEFI handle,
then the protocol is added to the existing UEFI handle.
@retval EFI_SUCCESS The protocol was added to ChildHandle.
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.
@retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create
the child
@retval other The child handle was not created
**/
EFI_STATUS
EFIAPI
EslDxeCreateChild (
IN EFI_SERVICE_BINDING_PROTOCOL * pThis,
IN OUT EFI_HANDLE * pChildHandle
);
/**
Destroys a child handle with a protocol installed on it.
When the socket application is linked against UseSocketDxe, the ::close
routine indirectly calls this routine in SocketDxe to undo the operations
done by the ::EslDxeCreateChild routine. This routine removes the socket
protocol from the handle and then destroys the child handle if there are
no other protocols attached.
@param [in] pThis Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
@param [in] ChildHandle Handle of the child to destroy
@retval EFI_SUCCESS The protocol was removed from ChildHandle.
@retval EFI_UNSUPPORTED ChildHandle does not support the protocol that is being removed.
@retval EFI_INVALID_PARAMETER Child handle is not a valid UEFI Handle.
@retval EFI_ACCESS_DENIED The protocol could not be removed from the ChildHandle
because its services are being used.
@retval other The child handle was not destroyed
**/
EFI_STATUS
EFIAPI
EslDxeDestroyChild (
IN EFI_SERVICE_BINDING_PROTOCOL * pThis,
IN EFI_HANDLE ChildHandle
);
/**
Install the socket service
SocketDxe uses this routine to announce the socket interface to
the rest of EFI.
@param [in] pImageHandle Address of the image handle
@retval EFI_SUCCESS Service installed successfully
**/
EFI_STATUS
EFIAPI
EslDxeInstall (
IN EFI_HANDLE * pImageHandle
);
/**
Uninstall the socket service
SocketDxe uses this routine to notify EFI that the socket layer
is no longer available.
@param [in] ImageHandle Handle for the image.
@retval EFI_SUCCESS Service installed successfully
**/
EFI_STATUS
EFIAPI
EslDxeUninstall (
IN EFI_HANDLE ImageHandle
);
//------------------------------------------------------------------------------
// Service Support Routines
//------------------------------------------------------------------------------
/**
Connect to the network service bindings
Walk the network service protocols on the controller handle and
locate any that are not in use. Create ::ESL_SERVICE structures to
manage the network layer interfaces for the socket driver. Tag
each of the network interfaces that are being used. Finally, this
routine calls ESL_SOCKET_BINDING::pfnInitialize to prepare the network
interface for use by the socket layer.
@param [in] BindingHandle Handle for protocol binding.
@param [in] Controller Handle of device to work with.
@retval EFI_SUCCESS This driver is added to Controller.
@retval other This driver does not support this device.
**/
EFI_STATUS
EFIAPI
EslServiceConnect (
IN EFI_HANDLE BindingHandle,
IN EFI_HANDLE Controller
);
/**
Shutdown the connections to the network layer by locating the
tags on the network interfaces established by ::EslServiceConnect.
This routine calls ESL_SOCKET_BINDING::pfnShutdown to shutdown the any
activity on the network interface and then free the ::ESL_SERVICE
structures.
@param [in] BindingHandle Handle for protocol binding.
@param [in] Controller Handle of device to stop driver on.
@retval EFI_SUCCESS This driver is removed Controller.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
@retval other This driver was not removed from this device.
**/
EFI_STATUS
EFIAPI
EslServiceDisconnect (
IN EFI_HANDLE BindingHandle,
IN EFI_HANDLE Controller
);
/**
Initialize the service layer
@param [in] ImageHandle Handle for the image.
**/
VOID
EFIAPI
EslServiceLoad (
IN EFI_HANDLE ImageHandle
);
/**
Shutdown the service layer
**/
VOID
EFIAPI
EslServiceUnload (
VOID
);
//------------------------------------------------------------------------------
// Socket Protocol Routines
//------------------------------------------------------------------------------
/**
Bind a name to a socket.
This routine calls the network specific layer to save the network
address of the local connection point.
The ::bind routine calls this routine to connect a name
(network address and port) to a socket on the local machine.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] pSockAddr Address of a sockaddr structure that contains the
connection point on the local machine. An IPv4 address
of INADDR_ANY specifies that the connection is made to
all of the network stacks on the platform. Specifying a
specific IPv4 address restricts the connection to the
network stack supporting that address. Specifying zero
for the port causes the network layer to assign a port
number from the dynamic range. Specifying a specific
port number causes the network layer to use that port.
@param [in] SockAddrLength Specifies the length in bytes of the sockaddr structure.
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Socket successfully created
**/
EFI_STATUS
EslSocketBind (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN CONST struct sockaddr * pSockAddr,
IN socklen_t SockAddrLength,
OUT int * pErrno
);
/**
Determine if the socket is closed
This routine checks the state of the socket to determine if
the network specific layer has completed the close operation.
The ::close routine polls this routine to determine when the
close operation is complete. The close operation needs to
reverse the operations of the ::EslSocketAllocate routine.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS Socket successfully closed
@retval EFI_NOT_READY Close still in progress
@retval EFI_ALREADY Close operation already in progress
@retval Other Failed to close the socket
**/
EFI_STATUS
EslSocketClosePoll (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN int * pErrno
);
/**
Start the close operation on the socket
This routine calls the network specific layer to initiate the
close state machine. This routine then calls the network
specific layer to determine if the close state machine has gone
to completion. The result from this poll is returned to the
caller.
The ::close routine calls this routine to start the close
operation which reverses the operations of the
::EslSocketAllocate routine. The close routine then polls
the ::EslSocketClosePoll routine to determine when the
socket is closed.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] bCloseNow Boolean to control close behavior
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS Socket successfully closed
@retval EFI_NOT_READY Close still in progress
@retval EFI_ALREADY Close operation already in progress
@retval Other Failed to close the socket
**/
EFI_STATUS
EslSocketCloseStart (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN BOOLEAN bCloseNow,
IN int * pErrno
);
/**
Connect to a remote system via the network.
This routine calls the network specific layer to establish
the remote system address and establish the connection to
the remote system.
The ::connect routine calls this routine to establish a
connection with the specified remote system. This routine
is designed to be polled by the connect routine for completion
of the network connection.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] pSockAddr Network address of the remote system.
@param [in] SockAddrLength Length in bytes of the network address.
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS The connection was successfully established.
@retval EFI_NOT_READY The connection is in progress, call this routine again.
@retval Others The connection attempt failed.
**/
EFI_STATUS
EslSocketConnect (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN const struct sockaddr * pSockAddr,
IN socklen_t SockAddrLength,
IN int * pErrno
);
/**
Get the local address.
This routine calls the network specific layer to get the network
address of the local host connection point.
The ::getsockname routine calls this routine to obtain the network
address associated with the local host connection point.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [out] pAddress Network address to receive the local system address
@param [in,out] pAddressLength Length of the local network address structure
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Local address successfully returned
**/
EFI_STATUS
EslSocketGetLocalAddress (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
OUT struct sockaddr * pAddress,
IN OUT socklen_t * pAddressLength,
IN int * pErrno
);
/**
Get the peer address.
This routine calls the network specific layer to get the remote
system connection point.
The ::getpeername routine calls this routine to obtain the network
address of the remote connection point.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [out] pAddress Network address to receive the remote system address
@param [in,out] pAddressLength Length of the remote network address structure
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Remote address successfully returned
**/
EFI_STATUS
EslSocketGetPeerAddress (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
OUT struct sockaddr * pAddress,
IN OUT socklen_t * pAddressLength,
IN int * pErrno
);
/**
Establish the known port to listen for network connections.
This routine calls into the network protocol layer to establish
a handler that is called upon connection completion. The handler
is responsible for inserting the connection into the FIFO.
The ::listen routine indirectly calls this routine to place the
socket into a state that enables connection attempts. Connections
are placed in a FIFO that is serviced by the application. The
application calls the ::accept (::EslSocketAccept) routine to
remove the next connection from the FIFO and get the associated
socket and address.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] Backlog Backlog specifies the maximum FIFO depth for
the connections waiting for the application
to call accept. Connection attempts received
while the queue is full are refused.
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Socket successfully created
@retval Other - Failed to enable the socket for listen
**/
EFI_STATUS
EslSocketListen (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN INT32 Backlog,
OUT int * pErrno
);
/**
Get the socket options
This routine handles the socket level options and passes the
others to the network specific layer.
The ::getsockopt routine calls this routine to retrieve the
socket options one at a time by name.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] level Option protocol level
@param [in] OptionName Name of the option
@param [out] pOptionValue Buffer to receive the option value
@param [in,out] pOptionLength Length of the buffer in bytes,
upon return length of the option value in bytes
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Socket data successfully received
**/
EFI_STATUS
EslSocketOptionGet (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN int level,
IN int option_name,
OUT void * __restrict option_value,
IN OUT socklen_t * __restrict option_len,
IN int * pErrno
);
/**
Set the socket options
This routine handles the socket level options and passes the
others to the network specific layer.
The ::setsockopt routine calls this routine to adjust the socket
options one at a time by name.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] level Option protocol level
@param [in] OptionName Name of the option
@param [in] pOptionValue Buffer containing the option value
@param [in] OptionLength Length of the buffer in bytes
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Option successfully set
**/
EFI_STATUS
EslSocketOptionSet (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN int level,
IN int option_name,
IN CONST void * option_value,
IN socklen_t option_len,
IN int * pErrno
);
/**
Poll a socket for pending activity.
This routine builds a detected event mask which is returned to
the caller in the buffer provided.
The ::poll routine calls this routine to determine if the socket
needs to be serviced as a result of connection, error, receive or
transmit activity.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] Events Events of interest for this socket
@param [in] pEvents Address to receive the detected events
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Socket successfully polled
@retval EFI_INVALID_PARAMETER - When pEvents is NULL
**/
EFI_STATUS
EslSocketPoll (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN short Events,
IN short * pEvents,
IN int * pErrno
);
/**
Receive data from a network connection.
This routine calls the network specific routine to remove the
next portion of data from the receive queue and return it to the
caller.
The ::recvfrom routine calls this routine to determine if any data
is received from the remote system. Note that the other routines
::recv and ::read are layered on top of ::recvfrom.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] Flags Message control flags
@param [in] BufferLength Length of the the buffer
@param [in] pBuffer Address of a buffer to receive the data.
@param [in] pDataLength Number of received data bytes in the buffer.
@param [out] pAddress Network address to receive the remote system address
@param [in,out] pAddressLength Length of the remote network address structure
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Socket data successfully received
**/
EFI_STATUS
EslSocketReceive (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN INT32 Flags,
IN size_t BufferLength,
IN UINT8 * pBuffer,
OUT size_t * pDataLength,
OUT struct sockaddr * pAddress,
IN OUT socklen_t * pAddressLength,
IN int * pErrno
);
/**
Shutdown the socket receive and transmit operations
This routine sets a flag to stop future transmissions and calls
the network specific layer to cancel the pending receive operation.
The ::shutdown routine calls this routine to stop receive and transmit
operations on the socket.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] How Which operations to stop
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Socket operations successfully shutdown
**/
EFI_STATUS
EslSocketShutdown (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN int How,
IN int * pErrno
);
/**
Send data using a network connection.
This routine calls the network specific layer to queue the data
for transmission. Eventually the buffer will reach the head of
the queue and will get transmitted over the network. For datagram
sockets there is no guarantee that the data reaches the application
running on the remote system.
The ::sendto routine calls this routine to send data to the remote
system. Note that ::send and ::write are layered on top of ::sendto.
@param [in] pSocketProtocol Address of an ::EFI_SOCKET_PROTOCOL structure.
@param [in] Flags Message control flags
@param [in] BufferLength Length of the the buffer
@param [in] pBuffer Address of a buffer containing the data to send
@param [in] pDataLength Address to receive the number of data bytes sent
@param [in] pAddress Network address of the remote system address
@param [in] AddressLength Length of the remote network address structure
@param [out] pErrno Address to receive the errno value upon completion.
@retval EFI_SUCCESS - Socket data successfully queued for transmit
**/
EFI_STATUS
EslSocketTransmit (
IN EFI_SOCKET_PROTOCOL * pSocketProtocol,
IN int Flags,
IN size_t BufferLength,
IN CONST UINT8 * pBuffer,
OUT size_t * pDataLength,
IN const struct sockaddr * pAddress,
IN socklen_t AddressLength,
IN int * pErrno
);
//------------------------------------------------------------------------------
#endif // _EFI_SOCKET_LIB_H_
Reference in New Issue View Git Blame Copy Permalink