sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
e88e191cde85b5cf5d96e90daaa01747db27d943
system76-edk2/Vlv2DeviceRefCodePkg/ValleyView2Soc/SouthCluster/Include/Protocol/SdHostIo.h
David Wei 3cbfba02fe Upload BSD-licensed Vlv2TbltDevicePkg and Vlv2DeviceRefCodePkg to 
https://svn.code.sf.net/p/edk2/code/trunk/edk2/, 

which are for MinnowBoard MAX open source project.


Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: David Wei <david.wei@intel.com>
Reviewed-by: Mike Wu <mike.wu@intel.com>
Reviewed-by: Hot Tian <hot.tian@intel.com>


git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16599 6f19259b-4bc3-4df7-8a09-765794883524
2015-01-12 09:37:20 +00:00

416 lines
11 KiB
C
Raw Blame History

/*++
Copyright (c) 1999 - 2014, Intel Corporation. All rights reserved
This program and the accompanying materials are licensed and made available under
the terms and conditions of the BSD License that accompanies this distribution.
The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
--*/
/*++
Module Name:
SdHostIo.h
Abstract:
Interface definition for EFI_SD_HOST_IO_PROTOCOL
--*/
#ifndef _SD_HOST_IO_H
#define _SD_HOST_IO_H
// Global ID for the EFI_SD_HOST_IO_PROTOCOL
// {B63F8EC7-A9C9-4472-A4C0-4D8BF365CC51}
//
#define EFI_SD_HOST_IO_PROTOCOL_GUID \
{ 0xb63f8ec7, 0xa9c9, 0x4472, { 0xa4, 0xc0, 0x4d, 0x8b, 0xf3, 0x65, 0xcc, 0x51 } }
typedef struct _EFI_SD_HOST_IO_PROTOCOL EFI_SD_HOST_IO_PROTOCOL;
//
// TODO: Move to Pci22.h
//
#define PCI_SUBCLASS_SD_HOST_CONTROLLER 0x05
#define PCI_IF_STANDARD_HOST_NO_DMA 0x00
#define PCI_IF_STANDARD_HOST_SUPPORT_DMA 0x01
//
// TODO: Retire
//
#define EFI_SD_HOST_IO_PROTOCOL_REVISION_01 0x01
//
// TODO: Do these belong in an Industry Standard include file?
//
// MMIO Registers definition for MMC/SDIO controller
//
#define MMIO_DMAADR 0x00
#define MMIO_BLKSZ 0x04
#define MMIO_BLKCNT 0x06
#define MMIO_CMDARG 0x08
#define MMIO_XFRMODE 0x0C
#define MMIO_SDCMD 0x0E
#define MMIO_RESP 0x10
#define MMIO_BUFDATA 0x20
#define MMIO_PSTATE 0x24
#define MMIO_HOSTCTL 0x28
#define MMIO_PWRCTL 0x29
#define MMIO_BLKGAPCTL 0x2A
#define MMIO_WAKECTL 0x2B
#define MMIO_CLKCTL 0x2C
#define MMIO_TOCTL 0x2E
#define MMIO_SWRST 0x2F
#define MMIO_NINTSTS 0x30
#define MMIO_ERINTSTS 0x32
#define MMIO_NINTEN 0x34
#define MMIO_ERINTEN 0x36
#define MMIO_NINTSIGEN 0x38
#define MMIO_ERINTSIGEN 0x3A
#define MMIO_AC12ERRSTS 0x3C
#define MMIO_HOST_CTL2 0x3E //hphang <- New in VLV2
#define MMIO_CAP 0x40
#define MMIO_CAP2 0x44 //hphang <- New in VLV2
#define MMIO_MCCAP 0x48
#define MMIO_FORCEEVENTCMD12ERRSTAT 0x50 //hphang <- New in VLV2
#define MMIO_FORCEEVENTERRINTSTAT 0x52 //hphang <- New in VLV2
#define MMIO_ADMAERRSTAT 0x54 //hphang <- New in VLV2
#define MMIO_ADMASYSADDR 0x58 //hphang <- New in VLV2
#define MMIO_PRESETVALUE0 0x60 //hphang <- New in VLV2
#define MMIO_PRESETVALUE1 0x64 //hphang <- New in VLV2
#define MMIO_PRESETVALUE2 0x68 //hphang <- New in VLV2
#define MMIO_PRESETVALUE3 0x6C //hphang <- New in VLV2
#define MMIO_BOOTTIMEOUTCTRL 0x70 //hphang <- New in VLV2
#define MMIO_DEBUGSEL 0x74 //hphang <- New in VLV2
#define MMIO_SHAREDBUS 0xE0 //hphang <- New in VLV2
#define MMIO_SPIINTSUP 0xF0 //hphang <- New in VLV2
#define MMIO_SLTINTSTS 0xFC
#define MMIO_CTRLRVER 0xFE
typedef enum {
ResponseNo = 0,
ResponseR1,
ResponseR1b,
ResponseR2,
ResponseR3,
ResponseR4,
ResponseR5,
ResponseR5b,
ResponseR6,
ResponseR7
} RESPONSE_TYPE;
typedef enum {
NoData = 0,
InData,
OutData
} TRANSFER_TYPE;
typedef enum {
Reset_Auto = 0,
Reset_DAT,
Reset_CMD,
Reset_DAT_CMD,
Reset_All,
Reset_HW
} RESET_TYPE;
typedef enum {
SDMA = 0,
ADMA2,
PIO
} DMA_MOD;
typedef struct {
UINT32 HighSpeedSupport: 1; //High speed supported
UINT32 V18Support: 1; //1.8V supported
UINT32 V30Support: 1; //3.0V supported
UINT32 V33Support: 1; //3.3V supported
UINT32 SDR50Support: 1;
UINT32 SDR104Support: 1;
UINT32 DDR50Support: 1;
UINT32 Reserved0: 1;
UINT32 BusWidth4: 1; // 4 bit width
UINT32 BusWidth8: 1; // 8 bit width
UINT32 Reserved1: 6;
UINT32 SDMASupport: 1;
UINT32 ADMA2Support: 1;
UINT32 DmaMode: 2;
UINT32 ReTuneTimer: 4;
UINT32 ReTuneMode: 2;
UINT32 Reserved2: 6;
UINT32 BoundarySize;
} HOST_CAPABILITY;
/*++
Routine Description:
The main function used to send the command to the card inserted into the SD host
slot.
It will assemble the arguments to set the command register and wait for the command
and transfer completed until timeout. Then it will read the response register to fill
the ResponseData
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
CommandIndex - The command index to set the command index field of command register
Argument - Command argument to set the argument field of command register
DataType - TRANSFER_TYPE, indicates no data, data in or data out
Buffer - Contains the data read from / write to the device
BufferSize - The size of the buffer
ResponseType - RESPONSE_TYPE
TimeOut - Time out value in 1 ms unit
ResponseData - Depending on the ResponseType, such as CSD or card status
Returns:
EFI_SUCCESS
EFI_INVALID_PARAMETER
EFI_OUT_OF_RESOURCES
EFI_TIMEOUT
EFI_DEVICE_ERROR
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SEND_COMMAND) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN UINT16 CommandIndex,
IN UINT32 Argument,
IN TRANSFER_TYPE DataType,
IN UINT8 *Buffer, OPTIONAL
IN UINT32 BufferSize,
IN RESPONSE_TYPE ResponseType,
IN UINT32 TimeOut,
OUT UINT32 *ResponseData OPTIONAL
);
/*++
Routine Description:
Set max clock frequency of the host, the actual frequency
may not be the same as MaxFrequency. It depends on
the max frequency the host can support, divider, and host
speed mode.
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
MaxFrequency - Max frequency in HZ
Returns:
EFI_SUCCESS
EFI_TIMEOUT
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_CLOCK_FREQUENCY) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN UINT32 MaxFrequency
);
/*++
Routine Description:
Set bus width of the host
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
BusWidth - Bus width in 1, 4, 8 bits
Returns:
EFI_SUCCESS
EFI_INVALID_PARAMETER
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_BUS_WIDTH) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN UINT32 BusWidth
);
/*++
Routine Description:
Set voltage which could supported by the host.
Support 0(Power off the host), 1.8V, 3.0V, 3.3V
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
Voltage - Units in 0.1 V
Returns:
EFI_SUCCESS
EFI_INVALID_PARAMETER
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_VOLTAGE) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN UINT32 Voltage
);
/*++
Routine Description:
Set Host High Speed
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
HighSpeed - True for High Speed Mode set, false for normal mode
Returns:
EFI_SUCCESS
EFI_INVALID_PARAMETER
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_SPEED_MODE) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN UINT32 HighSpeed
);
/*++
Routine Description:
Set High Speed Mode
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
SetHostDdrMode - True for DDR Mode set, false for normal mode
Returns:
EFI_SUCCESS
EFI_INVALID_PARAMETER
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_DDR_MODE) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN UINT32 DdrMode
);
/*++
Routine Description:
Reset the host
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
ResetAll - TRUE to reset all
Returns:
EFI_SUCCESS
EFI_TIMEOUT
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_RESET_SD_HOST) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN RESET_TYPE ResetType
);
/*++
Routine Description:
Reset the host
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
Enable - TRUE to enable, FALSE to disable
Returns:
EFI_SUCCESS
EFI_TIMEOUT
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_ENABLE_AUTO_STOP_CMD) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN BOOLEAN Enable
);
/*++
Routine Description:
Find whether these is a card inserted into the slot. If so
init the host. If not, return EFI_NOT_FOUND.
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
Returns:
EFI_SUCCESS
EFI_NOT_FOUND
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_DETECT_CARD_AND_INIT_HOST) (
IN EFI_SD_HOST_IO_PROTOCOL *This
);
/*++
Routine Description:
Set the Block length
Arguments:
This - Pointer to EFI_SD_HOST_IO_PROTOCOL
BlockLength - card supportes block length
Returns:
EFI_SUCCESS
EFI_TIMEOUT
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_BLOCK_LENGTH) (
IN EFI_SD_HOST_IO_PROTOCOL *This,
IN UINT32 BlockLength
);
typedef EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SETUP_DEVICE)(
IN EFI_SD_HOST_IO_PROTOCOL *This
);
//
// Interface structure for the EFI SD Host I/O Protocol
//
struct _EFI_SD_HOST_IO_PROTOCOL {
UINT32 Revision;
HOST_CAPABILITY HostCapability;
EFI_SD_HOST_IO_PROTOCOL_SEND_COMMAND SendCommand;
EFI_SD_HOST_IO_PROTOCOL_SET_CLOCK_FREQUENCY SetClockFrequency;
EFI_SD_HOST_IO_PROTOCOL_SET_BUS_WIDTH SetBusWidth;
EFI_SD_HOST_IO_PROTOCOL_SET_HOST_VOLTAGE SetHostVoltage;
EFI_SD_HOST_IO_PROTOCOL_SET_HOST_DDR_MODE SetHostDdrMode;
EFI_SD_HOST_IO_PROTOCOL_RESET_SD_HOST ResetSdHost;
EFI_SD_HOST_IO_PROTOCOL_ENABLE_AUTO_STOP_CMD EnableAutoStopCmd;
EFI_SD_HOST_IO_PROTOCOL_DETECT_CARD_AND_INIT_HOST DetectCardAndInitHost;
EFI_SD_HOST_IO_PROTOCOL_SET_BLOCK_LENGTH SetBlockLength;
EFI_SD_HOST_IO_PROTOCOL_SETUP_DEVICE SetupDevice;
EFI_SD_HOST_IO_PROTOCOL_SET_HOST_SPEED_MODE SetHostSpeedMode;
};
extern EFI_GUID gEfiSdHostIoProtocolGuid;
#endif
Reference in New Issue View Git Blame Copy Permalink