sravan/system76-edk2
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
fae5c1464dcd1d9b00c621a16699144566f71533
system76-edk2/OvmfPkg/OvmfPkgX64.fdf
Min Xu fae5c1464d OvmfPkg: Add TdxDxe driver 
RFC: https://bugzilla.tianocore.org/show_bug.cgi?id=3429

TdxDxe driver is dispatched early in DXE, due to being list in APRIORI.
This module is responsible for below features:
 - Sets max logical cpus based on TDINFO
 - Sets PCI PCDs based on resource hobs
 - Set shared bit in MMIO region
 - Relocate Td mailbox and set its address in MADT table.

1. Set shared bit in MMIO region

Qemu allows a ROM device to set to ROMD mode (default) or MMIO mode.
When it is in ROMD mode, the device is mapped to guest memory and
satisfies read access directly.

In EDK2 Option ROM is treated as MMIO region. So Tdx guest access
Option ROM via TDVMCALL(MMIO). But as explained above, since Qemu set
the Option ROM to ROMD mode, the call of TDVMCALL(MMIO) always return
INVALID_OPERAND. Tdvf then falls back to direct access. This requires
to set the shared bit to corresponding PageTable entry. Otherwise it
triggers GP fault.

TdxDxe's entry point is the right place to set the shared bit in MMIO
region because Option ROM has not been discoverd yet.

2. Relocate Td mailbox and set the new address in MADT Mutiprocessor
Wakeup Table.

In TDX the guest firmware is designed to publish a multiprocessor-wakeup
structure to let the guest-bootstrap processor wake up guest-application
processors with a mailbox. The mailbox is memory that the guest firmware
can reserve so each guest virtual processor can have the guest OS send
a message to them. The address of the mailbox is recorded in the MADT
table. See [ACPI].

TdxDxe registers for protocol notification
(gQemuAcpiTableNotifyProtocolGuid) to call the AlterAcpiTable(), in
which MADT table is altered by the above Mailbox address. The protocol
will be installed in AcpiPlatformDxe when the MADT table provided by
Qemu is ready. This is to maintain the simplicity of the AcpiPlatformDxe.

AlterAcpiTable is the registered function which traverses the ACPI
table list to find the original MADT from Qemu. After the new MADT is
configured and installed, the original one will be uninstalled.

[ACPI] https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model
/ACPI_Software_Programming_Model.html#multiprocessor-wakeup-structure

Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
2022-04-02 08:15:12 +00:00

532 lines
18 KiB
Plaintext
Raw Blame History

## @file
# Open Virtual Machine Firmware: FDF
#
# Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>
#
# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
################################################################################
[Defines]
!include OvmfPkgDefines.fdf.inc
#
# Build the variable store and the firmware code as one unified flash device
# image.
#
[FD.OVMF]
BaseAddress = $(FW_BASE_ADDRESS)
Size = $(FW_SIZE)
ErasePolarity = 1
BlockSize = $(BLOCK_SIZE)
NumBlocks = $(FW_BLOCKS)
!include VarStore.fdf.inc
$(VARS_SIZE)|$(FVMAIN_SIZE)
FV = FVMAIN_COMPACT
$(SECFV_OFFSET)|$(SECFV_SIZE)
FV = SECFV
#
# Build the variable store and the firmware code as separate flash device
# images.
#
[FD.OVMF_VARS]
BaseAddress = $(FW_BASE_ADDRESS)
Size = $(VARS_SIZE)
ErasePolarity = 1
BlockSize = $(BLOCK_SIZE)
NumBlocks = $(VARS_BLOCKS)
!include VarStore.fdf.inc
[FD.OVMF_CODE]
BaseAddress = $(CODE_BASE_ADDRESS)
Size = $(CODE_SIZE)
ErasePolarity = 1
BlockSize = $(BLOCK_SIZE)
NumBlocks = $(CODE_BLOCKS)
0x00000000|$(FVMAIN_SIZE)
FV = FVMAIN_COMPACT
$(FVMAIN_SIZE)|$(SECFV_SIZE)
FV = SECFV
################################################################################
[FD.MEMFD]
BaseAddress = $(MEMFD_BASE_ADDRESS)
Size = 0xD00000
ErasePolarity = 1
BlockSize = 0x10000
NumBlocks = 0xD0
0x000000|0x006000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesSize
0x006000|0x001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfLockBoxStorageBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfLockBoxStorageSize
0x007000|0x001000
gEfiMdePkgTokenSpaceGuid.PcdGuidedExtractHandlerTableAddress|gUefiOvmfPkgTokenSpaceGuid.PcdGuidedExtractHandlerTableSize
0x008000|0x001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbPageTableSize
0x009000|0x002000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbSize
0x00B000|0x001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfWorkAreaBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfWorkAreaSize
0x00C000|0x001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBackupBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecGhcbBackupSize
0x00D000|0x001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpSecretsBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSnpSecretsSize
0x00E000|0x001000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfCpuidBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfCpuidSize
0x010000|0x010000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize
0x020000|0x0E0000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize
FV = PEIFV
0x100000|0xC00000
gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize
FV = DXEFV
##########################################################################################
# Set the SEV-ES specific work area PCDs
#
SET gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaBase = $(MEMFD_BASE_ADDRESS) + gUefiOvmfPkgTokenSpaceGuid.PcdOvmfWorkAreaBase + gUefiOvmfPkgTokenSpaceGuid.PcdOvmfConfidentialComputingWorkAreaHeader
SET gUefiCpuPkgTokenSpaceGuid.PcdSevEsWorkAreaSize = gUefiOvmfPkgTokenSpaceGuid.PcdOvmfWorkAreaSize - gUefiOvmfPkgTokenSpaceGuid.PcdOvmfConfidentialComputingWorkAreaHeader
##########################################################################################
################################################################################
[FV.SECFV]
FvNameGuid = 763BED0D-DE9F-48F5-81F1-3E90E1B1A015
BlockSize = 0x1000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
#
# SEC Phase modules
#
# The code in this FV handles the initial firmware startup, and
# decompresses the PEI and DXE FVs which handles the rest of the boot sequence.
#
INF OvmfPkg/Sec/SecMain.inf
INF RuleOverride=RESET_VECTOR OvmfPkg/ResetVector/ResetVector.inf
################################################################################
[FV.PEIFV]
FvNameGuid = 6938079B-B503-4E3D-9D24-B28337A25806
BlockSize = 0x10000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
}
#
# PEI Phase modules
#
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/Pei/ReportStatusCodeRouterPei.inf
INF MdeModulePkg/Universal/StatusCodeHandler/Pei/StatusCodeHandlerPei.inf
INF OvmfPkg/PlatformPei/PlatformPei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
INF UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf
!if $(SMM_REQUIRE) == TRUE
INF MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf
INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
INF OvmfPkg/SmmAccess/SmmAccessPei.inf
!endif
INF UefiCpuPkg/CpuMpPei/CpuMpPei.inf
!include OvmfPkg/OvmfTpmPei.fdf.inc
################################################################################
[FV.DXEFV]
FvForceRebase = FALSE
FvNameGuid = 7CB8BDC9-F8EB-4F34-AAEA-3EE4AF6516A1
BlockSize = 0x10000
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
APRIORI DXE {
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF OvmfPkg/TdxDxe/TdxDxe.inf
INF OvmfPkg/AmdSevDxe/AmdSevDxe.inf
!if $(SMM_REQUIRE) == FALSE
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
!endif
}
#
# DXE Phase modules
#
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF MdeModulePkg/Universal/ReportStatusCodeRouter/RuntimeDxe/ReportStatusCodeRouterRuntimeDxe.inf
INF MdeModulePkg/Universal/StatusCodeHandler/RuntimeDxe/StatusCodeHandlerRuntimeDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF OvmfPkg/8259InterruptControllerDxe/8259.inf
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF OvmfPkg/8254TimerDxe/8254Timer.inf
INF OvmfPkg/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupport.inf
INF OvmfPkg/PciHotPlugInitDxe/PciHotPlugInit.inf
INF MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf
INF OvmfPkg/Virtio10Dxe/Virtio10.inf
INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf
INF OvmfPkg/VirtioRngDxe/VirtioRng.inf
!if $(PVSCSI_ENABLE) == TRUE
INF OvmfPkg/PvScsiDxe/PvScsiDxe.inf
!endif
!if $(MPT_SCSI_ENABLE) == TRUE
INF OvmfPkg/MptScsiDxe/MptScsiDxe.inf
!endif
!if $(LSI_SCSI_ENABLE) == TRUE
INF OvmfPkg/LsiScsiDxe/LsiScsiDxe.inf
!endif
!if $(SECURE_BOOT_ENABLE) == TRUE
INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
!endif
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Application/UiApp/UiApp.inf
INF OvmfPkg/QemuKernelLoaderFsDxe/QemuKernelLoaderFsDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF MdeModulePkg/Universal/Disk/RamDiskDxe/RamDiskDxe.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
INF OvmfPkg/SataControllerDxe/SataControllerDxe.inf
INF MdeModulePkg/Bus/Ata/AtaAtapiPassThru/AtaAtapiPassThru.inf
INF MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf
INF MdeModulePkg/Bus/Pci/NvmExpressDxe/NvmExpressDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf
INF OvmfPkg/SioBusDxe/SioBusDxe.inf
!if $(SOURCE_DEBUG_ENABLE) == FALSE
INF MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf
!endif
INF MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KeyboardDxe.inf
INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf
INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf
INF MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf
INF MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf
INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
INF FatPkg/EnhancedFatDxe/Fat.inf
INF MdeModulePkg/Universal/Disk/UdfDxe/UdfDxe.inf
INF OvmfPkg/VirtioFsDxe/VirtioFsDxe.inf
!if $(TOOL_CHAIN_TAG) != "XCODE5"
INF ShellPkg/DynamicCommand/TftpDynamicCommand/TftpDynamicCommand.inf
INF ShellPkg/DynamicCommand/HttpDynamicCommand/HttpDynamicCommand.inf
INF OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.inf
!endif
INF ShellPkg/Application/Shell/Shell.inf
INF MdeModulePkg/Logo/LogoDxe.inf
INF OvmfPkg/TdxDxe/TdxDxe.inf
#
# Network modules
#
!if $(E1000_ENABLE)
FILE DRIVER = 5D695E11-9B3F-4b83-B25F-4A8D5D69BE07 {
SECTION PE32 = Intel3.5/EFIX64/E3522X2.EFI
}
!endif
!include NetworkPkg/Network.fdf.inc
INF OvmfPkg/VirtioNetDxe/VirtioNet.inf
#
# Usb Support
#
INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf
INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
INF MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf
!ifdef $(CSM_ENABLE)
INF OvmfPkg/Csm/BiosThunk/VideoDxe/VideoDxe.inf
INF OvmfPkg/Csm/LegacyBiosDxe/LegacyBiosDxe.inf
INF RuleOverride=CSM OvmfPkg/Csm/Csm16/Csm16.inf
!else
INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf
!endif
INF OvmfPkg/QemuRamfbDxe/QemuRamfbDxe.inf
INF OvmfPkg/VirtioGpuDxe/VirtioGpu.inf
INF OvmfPkg/PlatformDxe/Platform.inf
INF OvmfPkg/AmdSevDxe/AmdSevDxe.inf
INF OvmfPkg/IoMmuDxe/IoMmuDxe.inf
!if $(SMM_REQUIRE) == TRUE
INF OvmfPkg/SmmAccess/SmmAccess2Dxe.inf
INF OvmfPkg/SmmControl2Dxe/SmmControl2Dxe.inf
INF OvmfPkg/CpuS3DataDxe/CpuS3DataDxe.inf
INF MdeModulePkg/Core/PiSmmCore/PiSmmIpl.inf
INF MdeModulePkg/Core/PiSmmCore/PiSmmCore.inf
INF OvmfPkg/CpuHotplugSmm/CpuHotplugSmm.inf
INF UefiCpuPkg/CpuIo2Smm/CpuIo2Smm.inf
INF MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf
INF UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.inf
#
# Variable driver stack (SMM)
#
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesSmm.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteSmm.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmmRuntimeDxe.inf
!else
#
# Variable driver stack (non-SMM)
#
INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf
INF OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
!endif
#
# TPM support
#
!include OvmfPkg/OvmfTpmDxe.fdf.inc
################################################################################
[FV.FVMAIN_COMPACT]
FvNameGuid = 48DB5E17-707C-472D-91CD-1613E7EF51B0
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
#
# These firmware volumes will have files placed in them uncompressed,
# and then both firmware volumes will be compressed in a single
# compression operation in order to achieve better overall compression.
#
SECTION FV_IMAGE = PEIFV
SECTION FV_IMAGE = DXEFV
}
}
!include FvmainCompactScratchEnd.fdf.inc
################################################################################
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
PE32 PE32 Align=Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 Align=Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
RAW ACPI Optional |.acpi
RAW ASL Optional |.aml
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER.BINARY]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION.BINARY]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.USER_DEFINED.CSM]
FILE FREEFORM = $(NAMED_GUID) {
RAW BIN |.bin
}
[Rule.Common.SEC.RESET_VECTOR]
FILE RAW = $(NAMED_GUID) {
RAW BIN Align = 16 |.bin
}
[Rule.Common.SMM_CORE]
FILE SMM_CORE = $(NAMED_GUID) {
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_SMM_DRIVER]
FILE SMM = $(NAMED_GUID) {
SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
Reference in New Issue View Git Blame Copy Permalink