sravan/system76-embedded-controller
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Cleanup parallel programmer firmware, update ecflash

Browse Source
This commit is contained in:
Jeremy Soller
2020-01-02 20:04:09 -07:00
parent bd243a0700
commit 07eb7b7ad4
3 changed files with 2 additions and 243 deletions
Download Patch File Download Diff File Expand all files Collapse all files

219
src/board/arduino/mega2560/parallel.c
View File

@ -202,225 +202,6 @@ int parallel_transaction(struct Parallel * port, uint8_t * data, int length, boo
#define parallel_read(P, D, L) parallel_transaction(P, D, L, true, false)
#define parallel_write(P, D, L) parallel_transaction(P, D, L, false, false)
int parallel_read_at(struct Parallel * port, uint8_t address, uint8_t * data, int length) {
int res;
res = parallel_set_address(port, &address, 1);
if (res < 0) return res;
return parallel_read(port, data, length);
}
int parallel_write_at(struct Parallel * port, uint8_t address, uint8_t * data, int length) {
int res;
res = parallel_set_address(port, &address, 1);
if (res < 0) return res;
return parallel_write(port, data, length);
}
int parallel_flash_transaction(struct Parallel * port, uint32_t address, uint8_t * data, int length, bool read) {
int res;
uint8_t byte;
// ECINDAR3
byte = (uint8_t)(address >> 24);
res = parallel_write_at(port, 7, &byte, 1);
if (res < 0) return res;
// ECINDAR2
byte = (uint8_t)(address >> 16);
res = parallel_write_at(port, 6, &byte, 1);
if (res < 0) return res;
// ECINDAR1
byte = (uint8_t)(address >> 8);
res = parallel_write_at(port, 5, &byte, 1);
if (res < 0) return res;
// ECINDAR0
byte = (uint8_t)(address);
res = parallel_write_at(port, 4, &byte, 1);
if (res < 0) return res;
// ECINDDR
if (read) {
return parallel_read_at(port, 8, data, length);
} else {
return parallel_write_at(port, 8, data, length);
}
}
void parallel_host(void) {
printf("Parallel host. Reset to exit\n");
struct Parallel * port = &PORT;
parallel_reset(port);
for (;;) {
int c = getchar();
if (c < 0) break;
if (c == '\r') {
printf("Reading chip ID\n");
uint8_t id[3];
parallel_read_at(port, 0, &id[0], 1);
parallel_read_at(port, 1, &id[1], 1);
parallel_read_at(port, 2, &id[2], 1);
printf(" ID %02X%02X version %d\n", id[0], id[1], id[2]);
uint8_t byte;
byte = 0;
parallel_flash_transaction(port, 0x7FFFFE00, &byte, 1, false);
uint8_t command[5] = {0xB, 0, 0, 0, 0};
parallel_flash_transaction(port, 0x7FFFFD00, command, 5, false);
int i;
for (i = 0; i < 256; i++) {
parallel_flash_transaction(port, 0x7FFFFD00, &byte, 1, true);
printf("%02X: %02X\n", i, byte);
}
byte = 0;
parallel_flash_transaction(port, 0x7FFFFE00, &byte, 1, false);
}
}
parallel_hiz(port);
}
void parallel_peripheral(void) {
printf("Parallel peripheral (WIP, writes only). Reset to exit\n");
struct Parallel * port = &PORT;
parallel_hiz(port);
// Strobes are high when inactive
bool last_data_n = true;
bool last_addr_n = true;
for (;;) {
// Pull wait line low
gpio_set_dir(port->wait_n, true);
// Read data strobe and edge detect
bool data_n = gpio_get(port->data_n);
bool data_edge = last_data_n && !data_n;
// Read address strobe and edge detect
bool addr_n = gpio_get(port->addr_n);
bool addr_edge = last_addr_n && !addr_n;
// If not in reset
if (gpio_get(port->reset_n)) {
// On the falling edge of either strobe
if (data_edge || addr_edge) {
// Check if read or write cycle
bool read = gpio_get(port->write_n);
// Read data
uint8_t byte = 0;
#define DATA_BIT(B) \
if (gpio_get(port->d ## B)) byte |= (1 << B);
DATA_BITS
#undef DATA_BIT
//TODO: Check if strobe fell while reading
// Release wait line
gpio_set_dir(port->wait_n, false);
if (data_edge) {
putchar('d');
}
if (addr_edge) {
putchar('a');
}
if (read) {
putchar('<');
} else {
putchar('>');
}
printf("%02X\n", byte);
// Wait 1 microsecond
_delay_us(1);
}
}
last_data_n = data_n;
last_addr_n = addr_n;
}
}
void parallel_spy(void) {
printf("Parallel spy. Reset to exit\n");
struct Parallel * port = &PORT;
parallel_hiz(port);
// Strobes are high when inactive
bool last_data_n = true;
bool last_addr_n = true;
for (;;) {
// Read data strobe and edge detect
bool data_n = gpio_get(port->data_n);
bool data_edge = last_data_n && !data_n;
// Read address strobe and edge detect
bool addr_n = gpio_get(port->addr_n);
bool addr_edge = last_addr_n && !addr_n;
// If not in reset
if (gpio_get(port->reset_n)) {
// On the falling edge of either strobe
if (data_edge || addr_edge) {
// Check if read or write cycle
bool read = gpio_get(port->write_n);
// Read data
uint8_t byte = 0;
#define DATA_BIT(B) \
if (gpio_get(port->d ## B)) byte |= (1 << B);
DATA_BITS
#undef DATA_BIT
//TODO: Check if strobe fell while reading
if (data_edge) {
putchar('d');
}
if (addr_edge) {
putchar('a');
}
if (read) {
putchar('<');
} else {
putchar('>');
}
printf("%02X\n", byte);
}
}
last_data_n = data_n;
last_addr_n = addr_n;
}
}
int serial_transaction(uint8_t * data, int length, bool read) {
int i;
for (i = 0; i < length; i++) {