gaze17-3050: Update configs

- Add to CI
- Correct smart charger values
- Enable WLAN power
- Enable USB power
- Disable mute

Signed-off-by: Tim Crawford <tcrawford@system76.com>

.github/workflows/ci.yml

@@ -66,6 +66,8 @@ jobs:
             board: gaze16-3050
           - vendor: system76
             board: gaze16-3060
+          - vendor: system76
+            board: gaze17-3050
           - vendor: system76
             board: gaze17-3060-b
           - vendor: system76

src/board/system76/gaze17-3050/board.mk

@@ -22,11 +22,14 @@ CFLAGS+=-DPS2_TOUCHPAD=PS2_3
 
 # Set smart charger parameters
 # TODO: actually bq24800
+# Adapter input current = 7.5A
+# PRS1 = 0.010 ohm. Use exact adapter input current.
+# PRS2 = 0.010 ohm. Use desired charge current.
 CHARGER=bq24780s
 CFLAGS+=\
-	-DCHARGER_CHARGE_CURRENT=1536 \
+	-DCHARGER_CHARGE_CURRENT=0xB80 \
 	-DCHARGER_CHARGE_VOLTAGE=17600 \
-	-DCHARGER_INPUT_CURRENT=7500
+	-DCHARGER_INPUT_CURRENT=0x1D00
 
 # Set CPU power limits in watts
 CFLAGS+=\

src/board/system76/gaze17-3050/gpio.c

@@ -44,25 +44,22 @@ void gpio_init() {
     GCR20 = 0;
 
     // Set GPIO data
-    GPDRA = 0;
+    // WLAN_PWR_EN
+    GPDRA = BIT(3);
     // XLP_OUT
     GPDRB = BIT(4);
     GPDRC = 0;
     GPDRD = 0;
-    GPDRE = 0;
-    GPDRF = 0;
-    // H_PROCHOT#_EC
-    GPDRG = BIT(6);
+    // USB_PWR_EN
+    GPDRE = BIT(3);
+    // CC_EN
+    GPDRF = BIT(7);
+    // H_PROCHOT#_EC, WLAN_EN
+    GPDRG = BIT(6) | BIT(1);
     GPDRH = 0;
     GPDRI = 0;
-    GPDRJ = 0;
-    GPOTA = 0;
-    GPOTB = 0;
-    GPOTD = 0;
-    GPOTE = 0;
-    GPOTF = 0;
-    GPOTH = 0;
-    GPOTJ = 0;
+    // KBC_MUTE#
+    GPDRJ = BIT(1);
 
     // Set GPIO control
     // EC_PWM_PIN_24